-
Development of Rotating Target with Ferrofluid Seal for ILC Electron-Driven Positron Source
Authors:
Tsunehiko Omori,
Kaoru Yokoya,
Junji Urakawa,
Tohru Takahashi,
Masao Kuriki,
Masakazu Washio,
Masaru Kuribayashi,
Masaaki Yamakata,
Chie Nakaishi
Abstract:
In the ILC electron-driven positron source, acceleration tubes are located immediately downstream of the positron generation target to capture the generated positrons, necessitating high vacuum for their operation. We designed a rotating target using a ferrofluid rotating vacuum seal that can stably maintain a vacuum of 10-6 Pa and a tangential velocity of 5 m/sec, which meets the requirements of…
▽ More
In the ILC electron-driven positron source, acceleration tubes are located immediately downstream of the positron generation target to capture the generated positrons, necessitating high vacuum for their operation. We designed a rotating target using a ferrofluid rotating vacuum seal that can stably maintain a vacuum of 10-6 Pa and a tangential velocity of 5 m/sec, which meets the requirements of the ILC positron source. We fabricated a full-scale prototype and confirmed the compatibility of rotation and stable vacuum maintenance. Various tests on the radiation resistance of the ferrofluid demonstrated its ability to withstand six years of radiation exposure in normal ILC operation without degradation and to continue exhibiting vacuum sealing performance. Radiation exposure tests on a small-scale target with a structure and material similar to the full-scale target confirmed its operability after two years of radiation exposure in normal ILC operation. The design, including thermal load, stress analysis, and cooling, led to the conclusion of an estimated lifespan of the target of over one year, based on comparison with the SLC target. These results demonstrate and establish the technology of positron generation targets in the ILC electron-driven positron source.
△ Less
Submitted 30 June, 2024;
originally announced July 2024.
-
The Architecture of Sponge Choanocyte Chambers Maximizes Mechanical Pumping Efficiency
Authors:
Takumi Ogawa,
Shuji Koyama,
Toshihiro Omori,
Kenji Kikuchi,
Helene de Maleprade,
Raymond E. Goldstein,
Takuji Ishikawa
Abstract:
Sponges, the basalmost members of the animal kingdom, exhibit a range of complex architectures in which microfluidic channels connect multitudes of spherical chambers lined with choanocytes, flagellated filter-feeding cells. Choanocyte chambers can possess scores or even hundreds of such cells, which drive complex flows entering through porous walls and exiting into the sponge channels. One of the…
▽ More
Sponges, the basalmost members of the animal kingdom, exhibit a range of complex architectures in which microfluidic channels connect multitudes of spherical chambers lined with choanocytes, flagellated filter-feeding cells. Choanocyte chambers can possess scores or even hundreds of such cells, which drive complex flows entering through porous walls and exiting into the sponge channels. One of the mysteries of the choanocyte chamber is its spherical shape, as it seems inappropriate for inducing directional transport since many choanocyte flagella beat in opposition to such a flow. Here we combine direct imaging of choanocyte chambers in living sponges with computational studies of many-flagella models to understand the connection between chamber architecture and directional flow. We find that those flagella that beat against the flow play a key role in raising the pressure inside the choanocyte chamber, with the result that the mechanical pumping efficiency, calculated from the pressure rise and flow rate, reaches a maximum at a small outlet opening angle. Comparison between experimental observations and the results of numerical simulations reveal that the chamber diameter, flagellar wave number and the outlet opening angle of the freshwater sponge $E. muelleri$, as well as several other species, are related in a manner that maximizes the mechanical pumping efficiency. These results indicate the subtle balances at play during morphogenesis of choanocyte chambers, and give insights into the physiology and body design of sponges.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
First Study of the PIKACHU Project: Development and Evaluation of High-Purity Gd$_3$Ga$_3$Al$_2$O$_{12}$:Ce Crystals for $^{160}$Gd Double Beta Decay Search
Authors:
Takumi Omori,
Takashi Iida,
Azusa Gando,
Keishi Hosokawa,
Kei Kamada,
Keita Mizukoshi,
Yasuhiro Shoji,
Masao Yoshino,
Ken-Ichi Fushimi,
Hisanori Suzuki,
Kotaro Takahashi
Abstract:
Uncovering neutrinoless double beta decay (0$ν$2$β$) is crucial for confirming neutrinos' Majorana characteristics. The decay rate of 0$νββ$ is theoretically uncertain, influenced by nuclear matrix elements that vary across nuclides. To reduce this uncertainty, precise measurement of the half-life of neutrino-emitting double beta decay (2$ν$2$β$) in different nuclides is essential.
We have launc…
▽ More
Uncovering neutrinoless double beta decay (0$ν$2$β$) is crucial for confirming neutrinos' Majorana characteristics. The decay rate of 0$νββ$ is theoretically uncertain, influenced by nuclear matrix elements that vary across nuclides. To reduce this uncertainty, precise measurement of the half-life of neutrino-emitting double beta decay (2$ν$2$β$) in different nuclides is essential.
We have launched the PIKACHU (Pure Inorganic scintillator experiment in KAmioka for CHallenging Underground sciences) project to fabricate high-purity Ce-doped Gd$_{3}$Ga$_{3}$Al$_{2}$O$_{12}$ (GAGG) single crystals and use them to study the double beta decay of $^{160}$Gd. Predictions from two theoretical models on nuclear matrix element calculations for 2$ν$2$β$ in $^{160}$Gd show a significant discrepancy in estimated half-lives, differing by approximately an order of magnitude. If the lower half-life estimation holds true, detecting 2$ν$2$β$ in $^{160}$Gd could be achievable with a sensitivity enhancement slightly more than an order of magnitude compared to prior investigations using Ce-doped Gd$_2$SiO$_5$ (GSO) crystal. We have successfully developed GAGG crystals with purity levels surpassing previous standards through refined purification and selection of raw materials. Our experiments with these crystals indicate the feasibility of reaching sensitivities exceeding those of earlier studies. This paper discusses the ongoing development and scintillator performance evaluation of High-purity GAGG crystals, along with the anticipated future prospects of the PIKACHU experiment.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Measuring line tension: thermodynamic integration during detachment of a molecular dynamics droplet
Authors:
Minori Shintaku,
Haruki Oga,
Hiroki Kusudo,
Edward R. Smith,
Takeshi Omori,
Yasutaka Yamaguchi
Abstract:
The contact line (CL) is where solid, liquid and vapor phases meet, and Young's equation describes the macroscopic force balance of the interfacial tensions between these three phases. These interfacial tensions are related to the nanoscale stress inhomogeneity appearing around the interface, and for curved CLs, eg a three-dimensional droplet, another force known as the line tension must be includ…
▽ More
The contact line (CL) is where solid, liquid and vapor phases meet, and Young's equation describes the macroscopic force balance of the interfacial tensions between these three phases. These interfacial tensions are related to the nanoscale stress inhomogeneity appearing around the interface, and for curved CLs, eg a three-dimensional droplet, another force known as the line tension must be included in Young's equation. The line tension has units of force, acting parallel to the CL, and is required to incorporate the extra stress inhomogeneity around the CL into the force balance. Considering this feature, Bey et al. [J. Chem. Phys. \textbf{152}, 094707 (2020)] reported a mechanical approach to extract the value of line tension $\taul$ from molecular dynamics (MD) simulations. In this study, we show a novel thermodynamics interpretation of the line tension as the free energy per CL length, and based on this interpretation, through MD simulations of a quasi-static detachment process of a quasi-two-dimensional droplet from a solid surface, we obtained the value $\taul$ as a function of the contact angle. The simulation scheme is considered to be an extension of a thermodynamic integration method, previously used to calculate the solid-liquid and solid-vapor interfacial tensions through a detachment process, extended here to the three phase system. The obtained value agreed well with the result by Bey et al. and show the validity of thermodynamic integration at the three-phase interface.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
The receding contact line cools down during dynamic wetting
Authors:
Hiroki Kusudo,
Takeshi Omori,
Laurent Joly,
Yasutaka Yamaguchi
Abstract:
When a contact line (CL) -- where a liquid-vapor interface meets a substrate -- is put into motion, it is well known that the contact angle differs between advancing and receding CLs. Using non-equilibrium molecular dynamics simulations, we reveal another intriguing distinction between advancing and receding CLs: while temperature increases at an advancing CL -- as expected from viscous dissipatio…
▽ More
When a contact line (CL) -- where a liquid-vapor interface meets a substrate -- is put into motion, it is well known that the contact angle differs between advancing and receding CLs. Using non-equilibrium molecular dynamics simulations, we reveal another intriguing distinction between advancing and receding CLs: while temperature increases at an advancing CL -- as expected from viscous dissipation, we show that temperature can drop at a receding CL. Detailed quantitative analysis based on the macroscopic energy balance around the dynamic CL showed that the internal energy change of the fluid along the pathline induced a remarkable temperature drop around the receding CL, in a manner similar to latent heat upon phase changes. This result provides new insights for modeling the dynamic CL, and the framework for heat transport analysis introduced here can be applied to a wide range of nanofluidic systems.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Equilibrium molecular dynamics evaluation of the solid-liquid friction coefficient: role of timescales
Authors:
Haruki Oga,
Takeshi Omori,
Laurent Joly,
Yasutaka Yamaguchi
Abstract:
Solid-liquid friction plays a key role in nanofluidic systems. Yet, despite decades of method development to quantify solid-liquid friction using molecular dynamics (MD) simulations, an accurate and widely applicable method is still missing. Here, we propose a method to quantify the solid-liquid friction coefficient (FC) from equilibrium MD simulations of a liquid confined between parallel solid w…
▽ More
Solid-liquid friction plays a key role in nanofluidic systems. Yet, despite decades of method development to quantify solid-liquid friction using molecular dynamics (MD) simulations, an accurate and widely applicable method is still missing. Here, we propose a method to quantify the solid-liquid friction coefficient (FC) from equilibrium MD simulations of a liquid confined between parallel solid walls. In this method, the FC is evaluated by fitting the Green-Kubo (GK) integral of the S-L shear force autocorrelation for the range of time scales where the GK integral slowly decays with time. The fitting function was derived based on the analytical solution considering the hydrodynamic equations in our previous work [H. Oga et al., Phys. Rev. Research 3, L032019 (2021)], assuming that the timescales related to the friction kernel and to the bulk viscous dissipation can be separated. By comparing the results with those of other equilibrium MD-based methods and those of non-equilibrium MD for a Lennard-Jones liquid between flat crystalline walls with different wettability, we show that the FC is extracted with excellent accuracy by the present method, even in wettability regimes where other methods become innacurate. We then show that the method is also applicable to grooved solid walls, for which the GK integral displays a complex behavior at short times. Overall, the present method extracts efficiently the FC for various systems, with easy implementation and low computational cost.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Self-organisation of spermatozoa in bulk suspensions via unsteady elastohydrodynamic interactions
Authors:
Nanami Taketoshi,
Toshihiro Omori,
Takuji Ishikawa
Abstract:
We developed a mechanical model of spermatozoal swimming in bulk suspensions. We traced the spatiotemporal elastohydrodynamic interactions and found that spermatozoa engaged in self-organisation: flagellar undulatory motion generated a stable polar order. Conventional microswimmer theories use time-averaged stress fields to predict that the cellular structure is unstable. However, our present resu…
▽ More
We developed a mechanical model of spermatozoal swimming in bulk suspensions. We traced the spatiotemporal elastohydrodynamic interactions and found that spermatozoa engaged in self-organisation: flagellar undulatory motion generated a stable polar order. Conventional microswimmer theories use time-averaged stress fields to predict that the cellular structure is unstable. However, our present results reveal a novel self-organisation mechanism attributable to unsteady hydrodynamic interactions. We thus contribute to the theory of active soft matter dynamics.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Inertial migration of red blood cells under a Newtonian fluid in a circular channel
Authors:
Naoki Takeishi,
Hiroshi Yamashita,
Toshihiro Omori,
Naoto Yokoyama,
Shigeo Wada,
Masako Sugihara-Seki
Abstract:
We present a numerical analysis of the lateral movement and equilibrium radial positions of red blood cells (RBCs) with major diameter of 8 $μ$m under a Newtonian fluid in a circular channel with 50-$μ$m diameter. Each RBC, modelled as a biconcave capsule whose membrane satisfies strain-hardening characteristics, is simulated for different Reynolds numbers $Re$ and capillary numbers $Ca$, the latt…
▽ More
We present a numerical analysis of the lateral movement and equilibrium radial positions of red blood cells (RBCs) with major diameter of 8 $μ$m under a Newtonian fluid in a circular channel with 50-$μ$m diameter. Each RBC, modelled as a biconcave capsule whose membrane satisfies strain-hardening characteristics, is simulated for different Reynolds numbers $Re$ and capillary numbers $Ca$, the latter of which indicate the ratio of the fluid viscous force to the membrane elastic force. The effects of initial orientation angles and positions on the equilibrium radial position of an RBC centroid are also investigated. The numerical results show that depending on their initial orientations, RBCs have bistable flow modes, so-called rolling and tumbling motions. Most RBCs have a rolling motion. These stable modes are accompanied by different equilibrium radial positions, where tumbling RBCs are further away from the channel axis than rolling ones. The inertial migration of RBCs is achieved by alternating orientation angles, which are primarily affected by the initial orientation angles. Then the RBCs assume the aforementioned bistable modes during the migration, followed by further migration to the equilibrium radial position at much longer time periods. The power (or energy dissipation) associated with membrane deformations is introduced to quantify the state of membrane loads. The energy expenditures rely on stable flow modes, the equilibrium radial position of RBC centroids, and the viscosity ratio between the internal and external fluids.
△ Less
Submitted 24 September, 2022;
originally announced September 2022.
-
Precision beam telescope based on SOI pixel sensor technology for electrons in the energy range of sub-GeV to GeV
Authors:
Hisanori Suzuki,
Takumi Omori,
Kazuhiko Hara,
Hiroki Yamauchi,
Miho Yamada,
Toru Tsuboyama,
Ayaki Takeda
Abstract:
We developed a beam telescope system comprising five layers of 300-$μ$m-thick INTPIX4NA monolithic pixel sensors with each pixel size of 17 $μ$m square. The sensors were fabricated using silicon-on-insulator (SOI) technology. The signal-to-noise ratio of 140--230 is realized at a bias voltage of 20~V. The tracker system was tested using a positron beam of 200--822 MeV/c, and various tracking metho…
▽ More
We developed a beam telescope system comprising five layers of 300-$μ$m-thick INTPIX4NA monolithic pixel sensors with each pixel size of 17 $μ$m square. The sensors were fabricated using silicon-on-insulator (SOI) technology. The signal-to-noise ratio of 140--230 is realized at a bias voltage of 20~V. The tracker system was tested using a positron beam of 200--822 MeV/c, and various tracking methods are examined to optimize spatial precision achievable at these energies. The best tracking precision including the precision of the sensor under test itself is 11.04 $\pm$ 0.10 $μ$m for 822-MeV/c positrons for an equidistant sensor spacing of 32 mm. The achieved precision results combined with the intrinsic spatial resolution value obtained for a similar system using 120 GeV protons are used to estimate the tracking performance of electrons in the GeV energy range; a tracking precision of 2.22 $μ$m is evaluated for 5-GeV electrons. The method to estimate the tracking performance is verified using a Geant4-based simulation. The developed high precision tracker system enables to map the detailed performance of the sensors with pixel sizes of $\mathcal{O}$(10 $μ$m), therefore will be a powerful system for development of devices targeting precision position resolutions.
△ Less
Submitted 23 August, 2022; v1 submitted 8 May, 2022;
originally announced May 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Curvature dependence of the interfacial tensions around nanoscale cylinder: Young's equation still holds
Authors:
Keitaro Watanabe,
Hiroki Kusudo,
Carlos Bistafa,
Takeshi Omori,
Yasutaka Yamaguchi
Abstract:
By extending the theoretical framework derived in our previous study [Y. Imaizumi et al., J. Chem. Phys. 153, 034701 (2020)], we successfully calculated the solid-liquid (SL) and solid-vapor (SV) interfacial tensions of a simple Lennard-Jones fluid around solid cylinders with nanometer-scale diameters from single equilibrium molecular dynamics (MD) systems, in which a solid cylinder was vertically…
▽ More
By extending the theoretical framework derived in our previous study [Y. Imaizumi et al., J. Chem. Phys. 153, 034701 (2020)], we successfully calculated the solid-liquid (SL) and solid-vapor (SV) interfacial tensions of a simple Lennard-Jones fluid around solid cylinders with nanometer-scale diameters from single equilibrium molecular dynamics (MD) systems, in which a solid cylinder was vertically immersed into a liquid pool. The SL and SV interfacial tensions $γ_\mathrm{SL} - γ_\mathrm{S0}$ and $γ_\mathrm{SV} - γ_\mathrm{S0}$ relative to that for bare solid surface $γ_\mathrm{S0}$, respectively were obtained by simple force balance relations on fluid-containing control volumes set around the bottom and top of the solid cylinder, which are subject to the fluid stress and the force from the solid. % The theoretical contact angle calculated by Young's equation using these interfacial tensions agreed well with the apparent contact angle estimated by the analytical solution fitted to the meniscus shape, showing that Young's equation holds even for the menisci around solids with nanoscale curvature. % We have also found that the curvature effect on the contact angle was surprisingly small while it was indeed large on the local forces exerted on the solid cylinder near the contact line. In addition, the present results showed that the curvature dependence of the SL and SV interfacial free energies, which are the interfacial tensions, is different from that of the corresponding interfacial potential energies.
△ Less
Submitted 25 November, 2021;
originally announced November 2021.
-
Slip Length Measurement in Rectangular Graphene Nanochannels with a 3D Flow Analysis
Authors:
Kuan-Ting Chen,
Qin-Yi Li,
Takeshi Omori,
Yasutaka Yamaguchi,
Tatsuya Ikuta,
Koji Takahashi
Abstract:
Although many molecular dynamics simulations have been conducted on slip flow on graphene, experimental efforts remain very limited and our understanding of the flow friction on graphene remains far from sufficient. Here, to accurately measure the slip length in rectangular nanochannels, we develop a 3D capillary flow model that fully considers the nonuniform cross-section velocity profile, slip b…
▽ More
Although many molecular dynamics simulations have been conducted on slip flow on graphene, experimental efforts remain very limited and our understanding of the flow friction on graphene remains far from sufficient. Here, to accurately measure the slip length in rectangular nanochannels, we develop a 3D capillary flow model that fully considers the nonuniform cross-section velocity profile, slip boundary conditions, and the dynamic contact angle. We show that the 3D analysis is necessary even for a channel with a width/height ratio of 100. We fabricated graphene nanochannels with 45-nm depth and 5-μm width, and measured slip lengths of about 30 to 40 nm using this 3D flow model. We also reevaluated the slip-length data for graphene obtained from capillary filling experiments in the literature: 30 nm instead of originally claimed 45 nm for a 25-nm-deep channel, and 47 nm instead of 60 nm for an 8.5-nm-deep channel. We discover a smaller slip length than existing experimental measurements due to our full 3D flow analysis considered in our method. This work presents a rigorous analysis approach while also providing a better understanding of slip flow in graphene nanochannels, which will benefit further innovation in nanofluidic applications, including electronics cooling and biomedical chips.
△ Less
Submitted 23 December, 2021; v1 submitted 1 November, 2021;
originally announced November 2021.
-
Local stress tensor calculation by the Method-of-Plane in microscopic systems with macroscopic flow: a formulation based on the velocity distribution function
Authors:
Hiroki Kusudo,
Takeshi Omori,
Yasutaka Yamaguchi
Abstract:
In this work, we showed a calculation method of local stress tensor applicable to non-equilibrium MD systems based on the Method of Plane (MoP). From the relation between the macroscopic velocity distribution function and the microscopic molecular passage across a fixed control plane, we derived a method to calculate the basic properties of the macroscopic momentum conservation law including the d…
▽ More
In this work, we showed a calculation method of local stress tensor applicable to non-equilibrium MD systems based on the Method of Plane (MoP). From the relation between the macroscopic velocity distribution function and the microscopic molecular passage across a fixed control plane, we derived a method to calculate the basic properties of the macroscopic momentum conservation law including the density, the velocity, the momentum flux, the interaction and kinetic terms of the stress tensor defined on a surface with a finite area. Any component of the streaming velocity can be obtained on a control surface, which enables the separation of the kinetic momentum flux into the advection and stress terms in the framework of MoP. We verified the present method through the extraction of the density, velocity and stress distributions in a quasi-1D steady-state Couette flow system and in a quasi-2D steady-state system with a moving contact line. In our method, as opposed to volume average method, the density, mass and momentum fluxes are defined on a surface, which is essential to be consistent with the mass and momentum conservation laws in dynamic systems.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Theoretical framework for the atomistic modeling of frequency-dependent liquid-solid friction
Authors:
Haruki Oga,
Takeshi Omori,
Cecilia Herrero,
Samy Merabia,
Laurent Joly,
Yasutaka Yamaguchi
Abstract:
Nanofluidics shows great promise for energy conversion and desalination applications. The performance of nanofluidic devices is controlled by liquid-solid friction, quantified by the Navier friction coefficient (FC). Despite decades of research, there is no well-established generic framework to determine the frequency dependent Navier FC from atomistic simulations. Here, we have derived analytical…
▽ More
Nanofluidics shows great promise for energy conversion and desalination applications. The performance of nanofluidic devices is controlled by liquid-solid friction, quantified by the Navier friction coefficient (FC). Despite decades of research, there is no well-established generic framework to determine the frequency dependent Navier FC from atomistic simulations. Here, we have derived analytical expressions to connect the Navier FC to the random force autocorrelation on the confining wall, from the observation that the random force autocorrelation can be related to the hydrodynamic boundary condition, where the Navier FC appears. The analytical framework is generic in the sense that it explicitly includes the system size dependence and also the frequency dependence of the FC, which enabled us to address (i) the long-standing plateau issue in the evaluation of the FC and (ii) the non-Markovian behavior of liquid-solid friction of a Lennard-Jones liquid and of water on various walls and at various temperatures, including the supercooled regime. This new framework opens the way to explore the frequency dependent FC for a wide range of complex liquids.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Wilhelmy equation revisited: a lightweight method to measure liquid-vapor, solid-liquid and solid-vapor interfacial tensions from a single molecular dynamics simulation
Authors:
Yuta Imaizumi,
Takeshi Omori,
Hiroki Kusudo,
Carlos Bistafa,
Yasutaka Yamaguchi
Abstract:
We have given theoretical expressions for the forces exerted on a quasi-2D flat and smooth solid plate immersed into a liquid pool of a simple liquid. All forces given by the theory, the local forces on the top, the contact line and the bottom of the plate as well as the total force, showed an excellent agreement with the MD simulation results. We also revealed that the local forces around the bot…
▽ More
We have given theoretical expressions for the forces exerted on a quasi-2D flat and smooth solid plate immersed into a liquid pool of a simple liquid. All forces given by the theory, the local forces on the top, the contact line and the bottom of the plate as well as the total force, showed an excellent agreement with the MD simulation results. We also revealed that the local forces around the bottom and top of the solid plate can be related to the SL and SV interfacial tensions γ_{SL} and γ_{SV}, and this was verified through the comparison with the SL and SV works of adhesion obtained by the thermodynamic integration. We have reached a conclusion that γ_{SL} and γ_{SV} as well as the liquid-vapor interfacial tension γ_{LV} can be extracted from a single equilibrium MD simulation without the computationally-demanding calculations.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Asymmetry in cilia configuration induces hydrodynamic phase locking
Authors:
Keiji Okumura,
Seiya Nishikawa,
Toshihiro Omori,
Takuji Ishikawa,
Atsuko Takamatsu
Abstract:
To gain insight into the nature of biological synchronization at the microscopic scale, we here investigate the hydrodynamic synchronization between conically rotating objects termed nodal cilia. A mechanical model of three rotating cilia is proposed with consideration of variation in their shapes and geometrical arrangement. We conduct numerical estimations of both near-field and far-field hydrod…
▽ More
To gain insight into the nature of biological synchronization at the microscopic scale, we here investigate the hydrodynamic synchronization between conically rotating objects termed nodal cilia. A mechanical model of three rotating cilia is proposed with consideration of variation in their shapes and geometrical arrangement. We conduct numerical estimations of both near-field and far-field hydrodynamic interactions, and apply a conventional averaging method for weakly coupled oscillators. In the non-identical case, the three cilia showed stable locked-phase differences around $\pm π/2$. However, such phase locking also occurred with three identical cilia when allocated in a triangle except for the equilateral triangle. The effects of inhomogeneity in cilia shapes and geometrical arrangement on such asymmetric interaction is discussed to understand the role of biological variation in synchronization via hydrodynamic interactions.
△ Less
Submitted 5 January, 2018; v1 submitted 2 August, 2017;
originally announced August 2017.
-
Development of optical resonant cavities for laser-Compton scattering
Authors:
T. Akagi,
S. Araki,
Y. Honda,
A. Kosuge,
T. Omori,
H. Shimizu,
N. Terunuma,
J. Urakawa,
T. Takahashi,
R. Tanaka,
Y. Uesugi,
H. Yoshitama,
Y. Hosaka,
K. Sakaue,
M. Washio
Abstract:
We have been developing optical resonant cavities for laser-Compton scattering experiment at the Accelerator Test Facility in KEK. The main subject of the R&D is to increase laser pulse energy by coherently accumulating the pulses in an optical resonant cavity. We report previous results, current status and future prospects, including a new idea of an optical resonant cavity.
We have been developing optical resonant cavities for laser-Compton scattering experiment at the Accelerator Test Facility in KEK. The main subject of the R&D is to increase laser pulse energy by coherently accumulating the pulses in an optical resonant cavity. We report previous results, current status and future prospects, including a new idea of an optical resonant cavity.
△ Less
Submitted 15 March, 2017;
originally announced March 2017.
-
Mode-locked pulse oscillation of a self-resonating enhancement optical cavity
Authors:
Yuji Hosaka,
Yosuke Honda,
Atsushi Kosuge,
Tsunehiko Omori,
Kazuyuki Sakaue,
Tohru Takahashi,
Yuuki Uesugi,
Junji Urakawa,
Masakazu Washio
Abstract:
A power enhancement optical cavity is a compelling means of realizing a pulsed laser with a high peak power and high repetition frequency, which is not feasible using a simple amplifier scheme. However, a precise feedback system is necessary for maintaining the narrow resonance condition of the optical cavity; this has become a major technical issue in developing such cavities. We have developed a…
▽ More
A power enhancement optical cavity is a compelling means of realizing a pulsed laser with a high peak power and high repetition frequency, which is not feasible using a simple amplifier scheme. However, a precise feedback system is necessary for maintaining the narrow resonance condition of the optical cavity; this has become a major technical issue in developing such cavities. We have developed a new approach that does not require any active feedback system, by placing the cavity in the outer loop of a laser amplifier. We report on the first demonstration of a mode-locked pulse oscillation using the new system.
△ Less
Submitted 28 May, 2019; v1 submitted 10 October, 2016;
originally announced October 2016.
-
Feedback-free optical cavity with self-resonating mechanism
Authors:
Y. Uesugi,
Y. Hosaka,
Y. Honda,
A. Kosuge,
K. Sakaue,
T. Omori,
T. Takahashi,
J. Urakawa,
M. Washio
Abstract:
We demonstrated the operation of a high finesse optical cavity without utilizing an active feedback system to stabilize the resonance. The effective finesse, which is a finesse including the overall system performance, of the cavity was measured to be $394,000 \pm 10,000$, and the laser power stored in the cavity was $2.52 \pm 0.13$ kW, which is approximately 187,000 times greater than the inciden…
▽ More
We demonstrated the operation of a high finesse optical cavity without utilizing an active feedback system to stabilize the resonance. The effective finesse, which is a finesse including the overall system performance, of the cavity was measured to be $394,000 \pm 10,000$, and the laser power stored in the cavity was $2.52 \pm 0.13$ kW, which is approximately 187,000 times greater than the incident power to the cavity. The stored power was stabilized with a fluctuation of $1.7 \%$, and we confirmed continuous cavity operation for more than two hours. This result has the potential to trigger an innovative evolution for applications that use optical resonant cavities such as compact photon sources with laser-Compton scattering or cavity enhanced absorption spectroscopy.
△ Less
Submitted 2 March, 2016; v1 submitted 18 September, 2015;
originally announced September 2015.
-
Development of an intense positron source using a crystal--amorphous hybrid target for linear colliders
Authors:
Y. Uesugi,
T. Akagi,
R. Chehab,
O. Dadoun,
K. Furukawa,
T. Kamitani,
S. Kawada,
T. Omori,
T. Takahashi,
K. Umemori,
J. Urakawa,
M. Satoh,
V. Strakhovenko,
T. Suwada,
A. Variola
Abstract:
In a conventional positron source driven by a few GeV electron beam, a high amount of heat is loaded into a positron converter target to generate intense positrons required by linear colliders, and which would eventually damage the converter target. A hybrid target, composed of a single crystal target as a radiator of intense gamma--rays, and an amorphous converter target placed downstream of the…
▽ More
In a conventional positron source driven by a few GeV electron beam, a high amount of heat is loaded into a positron converter target to generate intense positrons required by linear colliders, and which would eventually damage the converter target. A hybrid target, composed of a single crystal target as a radiator of intense gamma--rays, and an amorphous converter target placed downstream of the crystal, was proposed as a scheme which could overcome the problem.This paper describes the development of an intense positron source with the hybrid target. A series of experiments on positron generation with the hybrid target has been carried out with a 8--GeV electron beam at the KEKB linac. We observed that positron yield from the hybrid target increased when the incident electron beam was aligned to the crystal axis and exceeded the one from the conventional target with the converter target of the same thickness, when its thickness is less than about 2 radiation length. The measurements in the temperature rise of the amorphous converter target was successfully carried out by use of thermocouples. These results lead to establishment to the evaluation of the hybrid target as an intense positron source.
△ Less
Submitted 16 October, 2013; v1 submitted 15 October, 2013;
originally announced October 2013.
-
A Large Hadron Electron Collider at CERN
Authors:
J. L. Abelleira Fernandez,
C. Adolphsen,
P. Adzic,
A. N. Akay,
H. Aksakal,
J. L. Albacete,
B. Allanach,
S. Alekhin,
P. Allport,
V. Andreev,
R. B. Appleby,
E. Arikan,
N. Armesto,
G. Azuelos,
M. Bai,
D. Barber,
J. Bartels,
O. Behnke,
J. Behr,
A. S. Belyaev,
I. Ben-Zvi,
N. Bernard,
S. Bertolucci,
S. Bettoni,
S. Biswal
, et al. (184 additional authors not shown)
Abstract:
This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of s…
▽ More
This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of some of the highlights of the physics programme, which relies on a vastly extended kinematic range, luminosity and unprecedented precision in deep inelastic scattering. Illustrations are provided regarding high precision QCD, new physics (Higgs, SUSY) and electron-ion physics. The LHeC is designed to run synchronously with the LHC in the twenties and to achieve an integrated luminosity of O(100) fb$^{-1}$. It will become the cleanest high resolution microscope of mankind and will substantially extend as well as complement the investigation of the physics of the TeV energy scale, which has been enabled by the LHC.
△ Less
Submitted 9 January, 2013; v1 submitted 20 November, 2012;
originally announced November 2012.
-
A Large Hadron Electron Collider at CERN: Report on the Physics and Design Concepts for Machine and Detector
Authors:
J. L. Abelleira Fernandez,
C. Adolphsen,
A. N. Akay,
H. Aksakal,
J. L. Albacete,
S. Alekhin,
P. Allport,
V. Andreev,
R. B. Appleby,
E. Arikan,
N. Armesto,
G. Azuelos,
M. Bai,
D. Barber,
J. Bartels,
O. Behnke,
J. Behr,
A. S. Belyaev,
I. Ben-Zvi,
N. Bernard,
S. Bertolucci,
S. Bettoni,
S. Biswal,
J. Blümlein,
H. Böttcher
, et al. (168 additional authors not shown)
Abstract:
The physics programme and the design are described of a new collider for particle and nuclear physics, the Large Hadron Electron Collider (LHeC), in which a newly built electron beam of 60 GeV, up to possibly 140 GeV, energy collides with the intense hadron beams of the LHC. Compared to HERA, the kinematic range covered is extended by a factor of twenty in the negative four-momentum squared,…
▽ More
The physics programme and the design are described of a new collider for particle and nuclear physics, the Large Hadron Electron Collider (LHeC), in which a newly built electron beam of 60 GeV, up to possibly 140 GeV, energy collides with the intense hadron beams of the LHC. Compared to HERA, the kinematic range covered is extended by a factor of twenty in the negative four-momentum squared, $Q^2$, and in the inverse Bjorken $x$, while with the design luminosity of $10^{33}$ cm$^{-2}$s$^{-1}$ the LHeC is projected to exceed the integrated HERA luminosity by two orders of magnitude. The physics programme is devoted to an exploration of the energy frontier, complementing the LHC and its discovery potential for physics beyond the Standard Model with high precision deep inelastic scattering measurements. These are designed to investigate a variety of fundamental questions in strong and electroweak interactions. The physics programme also includes electron-deuteron and electron-ion scattering in a $(Q^2, 1/x)$ range extended by four orders of magnitude as compared to previous lepton-nucleus DIS experiments for novel investigations of neutron's and nuclear structure, the initial conditions of Quark-Gluon Plasma formation and further quantum chromodynamic phenomena. The LHeC may be realised either as a ring-ring or as a linac-ring collider. Optics and beam dynamics studies are presented for both versions, along with technical design considerations on the interaction region, magnets and further components, together with a design study for a high acceptance detector. Civil engineering and installation studies are presented for the accelerator and the detector. The LHeC can be built within a decade and thus be operated while the LHC runs in its high-luminosity phase. It thus represents a major opportunity for progress in particle physics exploiting the investment made in the LHC.
△ Less
Submitted 7 September, 2012; v1 submitted 13 June, 2012;
originally announced June 2012.
-
Production of gamma rays by pulsed laser beam Compton scattering off GeV-electrons using a non-planar four-mirror optical cavity
Authors:
T. Akagi,
S. Araki,
J. Bonis,
I. Chaikovska,
R. Chiche,
R. Cizeron,
M. Cohen,
E. Cormier,
P. Cornebise,
N. Delerue,
R. Flaminio,
S. Funahashi,
D. Jehanno,
Y. Honda,
F. Labaye,
M. Lacroix,
R. Marie,
C. Michel,
S. Miyoshi,
S. Nagata,
T. Omori,
Y. Peinaud,
L. Pinard,
H. Shimizu,
V. Soskov
, et al. (6 additional authors not shown)
Abstract:
As part of the positron source R&D for future $e^+-e^-$ colliders and Compton based compact light sources, a high finesse non-planar four-mirror Fabry-Perot cavity has recently been installed at the ATF (KEK, Tsukuba, Japan). The first measurements of the gamma ray flux produced with a such cavity using a pulsed laser is presented here. We demonstrate the production of a flux of 2.7 $\pm$ 0.2 gamm…
▽ More
As part of the positron source R&D for future $e^+-e^-$ colliders and Compton based compact light sources, a high finesse non-planar four-mirror Fabry-Perot cavity has recently been installed at the ATF (KEK, Tsukuba, Japan). The first measurements of the gamma ray flux produced with a such cavity using a pulsed laser is presented here. We demonstrate the production of a flux of 2.7 $\pm$ 0.2 gamma rays per bunch crossing ($\sim3\times10^6$ gammas per second) during the commissioning.
△ Less
Submitted 4 January, 2012; v1 submitted 24 November, 2011;
originally announced November 2011.
-
High flux polarized gamma rays production: first measurements with a four-mirror cavity at the ATF
Authors:
Nicolas Delerue,
J. Bonis,
Iryna Chaikovska,
R. Chiche,
R. Cizeron,
M. Cohen,
J. Colin,
P. Cornebise,
D. Jehanno,
F. Labaye,
M. Lacroix,
R. Marie,
Y. Peinaud,
V. Soskov,
A. Variola,
F. Zomer,
E. Cormier,
R. Flaminio,
L. Pinard,
S. Araki,
S. Funahashi,
Y. Honda,
T. Omori,
H. Shimizu,
T. Terunuma
, et al. (5 additional authors not shown)
Abstract:
The next generation of e+/e- colliders will require a very intense flux of gamma rays to allow high current polarized positrons to be produced. This can be achieved by converting polarized high energy photons in polarized pairs into a target. In that context, an optical system consisting of a laser and a four-mirror passive Fabry-Perot cavity has recently been installed at the Accelerator Test Fac…
▽ More
The next generation of e+/e- colliders will require a very intense flux of gamma rays to allow high current polarized positrons to be produced. This can be achieved by converting polarized high energy photons in polarized pairs into a target. In that context, an optical system consisting of a laser and a four-mirror passive Fabry-Perot cavity has recently been installed at the Accelerator Test Facility (ATF) at KEK to produce a high flux of polarized gamma rays by inverse Compton scattering. In this contribution, we describe the experimental system and present preliminary results. An ultra-stable four-mirror non planar geometry has been implemented to ensure the polarization of the gamma rays produced. A fiber amplifier is used to inject about 10W in the high finesse cavity with a gain of 1000. A digital feedback system is used to keep the cavity at the length required for the optimal power enhancement. Preliminary measurements show that a flux of about $4\times10^6 γ$/s with an average energy of about 24 MeV was generated. Several upgrades currently in progress are also described.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
Effect of Compton Scattering on the Electron Beam Dynamics at the ATF Damping Ring
Authors:
I. Chaikovska,
C. Bruni,
N. Delerue,
A. Variola,
F. Zomer,
K. Kubo,
T. Naito,
T. Omori,
N. Terunuma,
J. Urakawa
Abstract:
Compton scattering provides one of the most promising scheme to obtain polarized positrons for the next generation of $e^-$ -- $e^+$ colliders. Moreover it is an attractive method to produce monochromatic high energy polarized gammas for nuclear applications and X-rays for compact light sources. In this framework a four-mirror Fabry-Pérot cavity has been installed at the Accelerator Test Facility…
▽ More
Compton scattering provides one of the most promising scheme to obtain polarized positrons for the next generation of $e^-$ -- $e^+$ colliders. Moreover it is an attractive method to produce monochromatic high energy polarized gammas for nuclear applications and X-rays for compact light sources. In this framework a four-mirror Fabry-Pérot cavity has been installed at the Accelerator Test Facility (ATF - KEK, Tsukuba, Japan) and is used to produce an intense flux of polarized gamma rays by Compton scattering \cite{ipac-mightylaser}. For electrons at the ATF energy (1.28 GeV) Compton scattering may result in a shorter lifetime due to the limited bucket acceptance. We have implemented the effect of Compton scattering on a 2D tracking code with a Monte-Carlo method. This code has been used to study the longitudinal dynamics of the electron beam at the ATF damping ring, in particular the evolution of the energy spread and the bunch length under Compton scattering. The results obtained are presented and discussed. Possible methods to observe the effect of Compton scattering on the ATF beam are proposed.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
A conventional positron source for International Linear Collider
Authors:
Tsunehiko Omori,
Tohru Takahashi,
Sabine Riemann,
Wei Gai,
Jie Gao,
Shin-ichi Kawada,
Wanming Liu,
Natsuki Okuda,
Guoxi Pei,
Junji Urakawa,
Andriy Ushakov
Abstract:
A possible solution to realize a conventional positron source driven by a several-GeV electron beam for the International Linear Collider is proposed. A 300 Hz electron linac is employed to create positrons with stretching pulse length in order to cure target thermal load. ILC requires about 2600 bunches in a train which pulse length is 1 ms. Each pulse of the 300 Hz linac creates about 130 bunche…
▽ More
A possible solution to realize a conventional positron source driven by a several-GeV electron beam for the International Linear Collider is proposed. A 300 Hz electron linac is employed to create positrons with stretching pulse length in order to cure target thermal load. ILC requires about 2600 bunches in a train which pulse length is 1 ms. Each pulse of the 300 Hz linac creates about 130 bunches, then 2600 bunches are created in 63 ms. Optimized parameters such as drive beam energy, beam size, and target thickness, are discussed assuming a L-band capture system to maximize the capture efficiency and to mitigate the target thermal load. A slow rotating tungsten disk is employed as positron generation target.
△ Less
Submitted 29 November, 2011; v1 submitted 7 October, 2011;
originally announced October 2011.
-
Photon generation by laser-Compton scattering at the KEK-ATF
Authors:
Shuhei Miyoshi,
Tomoya Akagi,
Sakae Araki,
Yoshisato Funahashi,
Tachishige Hirose,
Yosuke Honda,
Masao Kuriki,
Xiao Li,
Toshiyuki Okugi,
Tsunehiko Omori,
Guoxi Pei,
Kazuyuki Sakaue,
Hirotaka Shimizu,
Tohru Takahashi,
Nobuhiro Terunuma,
Junji Urakawa,
Yasuaki Ushio,
Masakazu Washio
Abstract:
We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colli…
▽ More
We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colliding them with the 1.3 GeV electron beam in the ATF ring while maintaining the laser pulse accumulation in the cavity. As a result, we observed 26.0 +/- 0.1 photons per electron-laser pulse crossing, which corresponds to a yield of 10^8 photons in a second.
△ Less
Submitted 18 February, 2010;
originally announced February 2010.
-
Design of a Polarised Positron Source Based on Laser Compton Scattering
Authors:
S. Araki,
Y. Higashi,
Y. Honda,
Y. Kurihara,
M. Kuriki,
T. Okugi,
T. Omori,
T. Taniguchi,
N. Terunuma,
J. Urakawa,
X. Artru,
M. Chevallier,
V. Strakhovenko,
E. Bulyak,
P. Gladkikh,
K. Moenig,
R. Chehab,
A. Variola,
F. Zomer,
S. Guiducci,
P. Raimondi,
F. Zimmermann,
K. Sakaue,
T. Hirose,
M. Washio
, et al. (10 additional authors not shown)
Abstract:
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
△ Less
Submitted 15 September, 2005; v1 submitted 2 September, 2005;
originally announced September 2005.
-
Efficient propagation of the polarization from laser photons to positrons through Compton scattering and electron-positron pair creation
Authors:
T. Omori,
M. Fukuda,
T. Hirose,
Y. Kurihara,
R. Kuroda,
M. Nomura,
A. Ohashi,
T. Okugi,
K. Sakaue,
T. Saito,
J. Urakawa,
M. Washio,
I. Yamazaki
Abstract:
We demonstrated for the first time the production of highly polarized short-pulse positrons with a finite energy spread in accordance with a new scheme that consists of two-quantum processes, such as inverse Compton scatterings and electron-positron pair creations. Using a circularly polarized laser beam of 532 nm scattered off a high-quality electron beam with the energy of 1.28 GeV, we obtaine…
▽ More
We demonstrated for the first time the production of highly polarized short-pulse positrons with a finite energy spread in accordance with a new scheme that consists of two-quantum processes, such as inverse Compton scatterings and electron-positron pair creations. Using a circularly polarized laser beam of 532 nm scattered off a high-quality electron beam with the energy of 1.28 GeV, we obtained polarized positrons with an intensity of 10^4 e+/bunch. Magnitude of positron polarizations was determined as 73+-15(sta) +-19(sys)% by means of a newly designed positron polarimeter.
△ Less
Submitted 20 February, 2006; v1 submitted 11 August, 2005;
originally announced August 2005.
