-
Reactive Molecular Dynamics Simulation on DNA Double Strand Breaks Induced by Hydrogen Elimination
Authors:
Hiroaki Nakamura,
Kento Ishiguro,
Ayako Nakata,
Shunsuke Usami,
Seiki Saito,
Susumu Fujiwara
Abstract:
We propose a scar model to reproduce how double-strand breaks occur in the telomeric DNA damaged by the effect of the $β$-decay of tritium to helium. In this scar model, the two hydrogens bonded to the 5$^\prime$ carbon connecting the pent saccharides and phosphate are removed. Molecular dynamics simulations using the reactive force field are carried out for 10 cases for the telomeric DNA consisti…
▽ More
We propose a scar model to reproduce how double-strand breaks occur in the telomeric DNA damaged by the effect of the $β$-decay of tritium to helium. In this scar model, the two hydrogens bonded to the 5$^\prime$ carbon connecting the pent saccharides and phosphate are removed. Molecular dynamics simulations using the reactive force field are carried out for 10 cases for the telomeric DNA consisting of 16 base pairs (32 nucleotides). It results in double-strand breaks (DSBs) being observed for structures with more than 24 scars. For 16 scar cases, only single-strand breaks (SSB) are observed. Moreover, in the case of $\left\{16, 0 \right\}$ and $\left\{ 0, 16 \right\},$ where only one of the strands had scars, SSB occurs only in the scarred strand. Secondly, in the $\left\{16, 8 \right\}$ and $\left\{ 8, 16 \right\}$ cases, DSBs occurs. Therefore, we conclude that the following conditions are necessary for DSBs:(i) Scars must occur on both the L and R strands. (ii) A large number of scars (24 or more) must occur in close proximity to each other.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
The study of propagation characteristics of millimeter-wave vortex in magnetized plasma by using FDTD Method
Authors:
Chenxu Wang,
Hideki Kawaguchi,
Hiroaki Nakamura,
Shin Kubo
Abstract:
It is pointed out that millimeter-wave vortex may contribute an efficient plasma heating since it was found that the millimeter-wave vortex can propagate in magnetized plasma even in which the normal plane wave is in cut-off condition. Then, it was assumed that the vortex field was the Laguerre-Gaussian (L-G) mode which is free-space solution, but the generation and stable propagation of the L-G m…
▽ More
It is pointed out that millimeter-wave vortex may contribute an efficient plasma heating since it was found that the millimeter-wave vortex can propagate in magnetized plasma even in which the normal plane wave is in cut-off condition. Then, it was assumed that the vortex field was the Laguerre-Gaussian (L-G) mode which is free-space solution, but the generation and stable propagation of the L-G mode vortex are not easy in the millimeter frequency range. On the other hand, it is known that millimeter-wave hybrid mode of cylindrical corrugated waveguide has also vortex property. In this paper, we investigate propagation characteristics of millimeter-wave vortex of a hybrid mode of cylindrical corrugated waveguide in the magnetized plasma by using three dimensional numerical simulations with finite-difference time-domain (FDTD) method.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Molecular dynamics simulation for coalescence of vacancies in tungsten crystal
Authors:
Sotaro Tsuru,
Hiroaki Nakamura,
Yuki Goto,
Miyuki Yajima,
Seiki Saito,
Shunsuke Usami
Abstract:
We performed molecular dynamics simulations of coalescence of two vacancies in a tungsten (W) crystal to elucidate the effect of temperature and hydrogen atoms. Simulations were performed for two types of vacancy structures, $\mathrm{V}_9 + \mathrm{W}_1 + \mathrm{V}_9$ and $\mathrm{V}_{10} + \mathrm{W}_4 + \mathrm{V}_{10}$ ($\mathrm{V}_{n}$ means that a vacancy corresponds to the absence of $n$ W…
▽ More
We performed molecular dynamics simulations of coalescence of two vacancies in a tungsten (W) crystal to elucidate the effect of temperature and hydrogen atoms. Simulations were performed for two types of vacancy structures, $\mathrm{V}_9 + \mathrm{W}_1 + \mathrm{V}_9$ and $\mathrm{V}_{10} + \mathrm{W}_4 + \mathrm{V}_{10}$ ($\mathrm{V}_{n}$ means that a vacancy corresponds to the absence of $n$ W atoms, and $\mathrm{W}_{m}$ indicates that there are $m$ W atoms between two vacancies) in various cases of temperature and hydrogen atom concentration. Under the vacancy structure $\mathrm{V}_9 + \mathrm{W}_1 + \mathrm{V}_9$, we observed vacancy coalescence for all the cases of the temperature and the number of hydrogen atoms. Evaluating the potential energy required for removing one of the W atoms between two vacancies, we found that high temperature and existing hydrogen atoms in the vacancies facilitate vacancy coalescence, and that under the structure $\mathrm{V}_{10} + \mathrm{W}_4 + \mathrm{V}_{10}$, hydrogen atoms facilitate vacancy coalescence most strongly when the number is around 45 to 54 in each vacancy.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Performance evaluation of electron multiplier tubes as a high-intensity muon beam monitor
Authors:
Takashi Honjo,
Yosuke Ashida,
Oderich F. Auersperg-Castell,
Megan Friend,
Ian Heitkamp,
Atsuko K. Ichikawa,
Masaki Ishitsuka,
Nao Izumi,
Sohei Kasama,
Yuma Kawamura,
Tatsuya Kikawa,
Takuya Kobata,
Tsunayuki Matsubara,
Kiseki D. Nakamura,
Hina Nakamura,
Yukine Sato,
Ken Sakashita,
Yoshihiro Seiya,
Kouchi Takifuji,
Tatsuya Yamamoto,
Kazuhiro Yamamoto,
Kenji Yasutome
Abstract:
Upgrade work towards increasing the beam intensity of the neutrino production beamline at J-PARC is underway. Tertiary muon beam monitoring is essential for stable operation of the beamline. Accordingly, we are planning to replace the present muon monitor detectors with electron multiplier tubes (EMTs). We investigated the linearity and radiation tolerance of EMTs using a 90 MeV electron beam at t…
▽ More
Upgrade work towards increasing the beam intensity of the neutrino production beamline at J-PARC is underway. Tertiary muon beam monitoring is essential for stable operation of the beamline. Accordingly, we are planning to replace the present muon monitor detectors with electron multiplier tubes (EMTs). We investigated the linearity and radiation tolerance of EMTs using a 90 MeV electron beam at the Research Center for Electron Photon Science. EMTs show higher radiation tolerance than the Si sensors which are presently used as one of the muon monitor detectors for the T2K long-baseline neutrino oscillation experiment at J-PARC. The signal yield decrease is found to be less than 10% after a beam irradiation equivalent to 132-days of operation at the future J-PARC beam power of 1.3 MW. The observed yield decrease is likely due to dynode deterioration, based on the results of a detailed investigation. The studies described here confirm that EMTs can be used as a high-intensity muon beam monitor.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Scintillator ageing of the T2K near detectors from 2010 to 2021
Authors:
The T2K Collaboration,
K. Abe,
N. Akhlaq,
R. Akutsu,
A. Ali,
C. Alt,
C. Andreopoulos,
M. Antonova,
S. Aoki,
T. Arihara,
Y. Asada,
Y. Ashida,
E. T. Atkin,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
D. Barrow,
M. Batkiewicz-Kwasniak,
F. Bench,
V. Berardi,
L. Berns,
S. Bhadra,
A. Blanchet,
A. Blondel
, et al. (333 additional authors not shown)
Abstract:
The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation…
▽ More
The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation rate through to 2040 indicates the recorded light yield should remain above the lower threshold used by the current reconstruction algorithms for all subsystems. This will allow the near detectors to continue contributing to important physics measurements during the T2K-II and Hyper-Kamiokande eras. Additionally, work to disentangle the degradation of the plastic scintillator and wavelength shifting fibres shows that the reduction in light yield can be attributed to the ageing of the plastic scintillator.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Code O-SUKI-N 3D: Upgraded Direct-Drive Fuel Target 3D Implosion Code in Heavy Ion Inertial Fusion
Authors:
H. Nakamura,
K. Uchibori,
S. Kawata,
T. Karino,
R. Sato,
A. I. Ogoyski
Abstract:
The Code O-SUKI-N 3D is an upgraded version of the 2D Code O-SUKI (Comput. Phys. Commun. 240, 83 (2019)). Code O-SUKI-N 3D is an integrated 3-dimensional (3D) simulation program system for fuel implosion, ignition and burning of a direct-drive nuclear-fusion pellet in heavy ion beam (HIB) inertial confinement fusion (HIF).The Code O-SUKI-N 3D consists of the three programs of Lagrangian fluid impl…
▽ More
The Code O-SUKI-N 3D is an upgraded version of the 2D Code O-SUKI (Comput. Phys. Commun. 240, 83 (2019)). Code O-SUKI-N 3D is an integrated 3-dimensional (3D) simulation program system for fuel implosion, ignition and burning of a direct-drive nuclear-fusion pellet in heavy ion beam (HIB) inertial confinement fusion (HIF).The Code O-SUKI-N 3D consists of the three programs of Lagrangian fluid implosion program, data conversion program, and Euler fluid implosion, ignition and burning program. The Code O-SUKI-N 3D can also couple with the HIB illumination and energy deposition program of OK3 (Comput. Phys. Commun. 181, 1332 (2010)). The spherical target implosion 3D behavior is computed by the 3D Lagrangian fluid code until the time just before the void closure of the fuel implosion. After that, all the data by the Lagrangian implosion code are converted to the data for the 3D Eulerian code. In the 3D Euler code, the DT fuel compression at the stagnation, ignition and burning are computed. The Code O-SUKI-N 3D simulation system provides a capability to compute and to study the HIF target implosion dynamics.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Supernova Model Discrimination with Hyper-Kamiokande
Authors:
Hyper-Kamiokande Collaboration,
:,
K. Abe,
P. Adrich,
H. Aihara,
R. Akutsu,
I. Alekseev,
A. Ali,
F. Ameli,
I. Anghel,
L. H. V. Anthony,
M. Antonova,
A. Araya,
Y. Asaoka,
Y. Ashida,
V. Aushev,
F. Ballester,
I. Bandac,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz-Kwasniak,
M. Bellato,
V. Berardi,
M. Bergevin
, et al. (478 additional authors not shown)
Abstract:
Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla…
▽ More
Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature.
△ Less
Submitted 20 July, 2021; v1 submitted 13 January, 2021;
originally announced January 2021.
-
The Hyper-Kamiokande Experiment -- Snowmass LOI
Authors:
Hyper-Kamiokande Collaboration,
:,
K. Abe,
P. Adrich,
H. Aihara,
R. Akutsu,
I. Alekseev,
A. Ali,
F. Ameli,
L. H. V. Anthony,
A. Araya,
Y. Asaoka,
V. Aushev,
I. Bandac,
M. Barbi,
G. Barr,
M. Batkiewicz-Kwasniak,
M. Bellato,
V. Berardi,
L. Bernard,
E. Bernardini,
L. Berns,
S. Bhadra,
J. Bian,
A. Blanchet
, et al. (366 additional authors not shown)
Abstract:
Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc…
▽ More
Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs.
△ Less
Submitted 1 September, 2020;
originally announced September 2020.
-
Applications of Quantum Computing for Investigations of Electronic Transitions in Phenylsulfonyl-carbazole TADF Emitters
Authors:
Qi Gao,
Gavin O. Jones,
Mario Motta,
Michihiko Sugawara,
Hiroshi C. Watanabe,
Takao Kobayashi,
Eriko Watanabe,
Yu-ya Ohnishi,
Hajime Nakamura,
Naoki Yamamoto
Abstract:
A quantum chemistry study of the first singlet (S1) and triplet (T1) excited states of phenylsulfonyl-carbazole compounds, proposed as useful thermally activated delayed fluorescence (TADF) emitters for organic light emitting diode (OLED) applications, was performed with the quantum Equation-Of-Motion Variational Quantum Eigensolver (qEOM-VQE) and Variational Quantum Deflation (VQD) algorithms on…
▽ More
A quantum chemistry study of the first singlet (S1) and triplet (T1) excited states of phenylsulfonyl-carbazole compounds, proposed as useful thermally activated delayed fluorescence (TADF) emitters for organic light emitting diode (OLED) applications, was performed with the quantum Equation-Of-Motion Variational Quantum Eigensolver (qEOM-VQE) and Variational Quantum Deflation (VQD) algorithms on quantum simulators and devices. These quantum simulations were performed with double zeta quality basis sets on an active space comprising the highest occupied and lowest unoccupied molecular orbitals (HOMO, LUMO) of the TADF molecules. The differences in energy separations between S1 and T1 ($ΔE_{st}$) predicted by calculations on quantum simulators were found to be in excellent agreement with experimental data. Differences of 16 and 88 mHa with respect to exact energies were found for excited states by using the qEOM-VQE and VQD algorithms, respectively, to perform simulations on quantum devices without error mitigation. By utilizing error mitigation by state tomography to purify the quantum states and correct energy values, the large errors found for unmitigated results could be improved to differences of, at most, 3 mHa with respect to exact values. Consequently, excellent agreement could be found between values of $ΔE_{st}$ predicted by quantum simulations and those found in experiments.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Three-Dimensional Euler Fluid Code for Fusion Fuel Ignition and Burning
Authors:
Hiroki Nakamura,
Shigeo Kawata,
Ken Uchibori,
Takahiro Karino
Abstract:
The document describes a numerical algorithm to simulate plasmas and fluids in the 3 dimensional space by the Euler method, in which the spatial meshes are fixed to the space. The plasmas and fluids move through the spacial Euler mesh boundary. The Euler method can represent a large deformation of the plasmas and fluids. On the other hand, when the plasmas or fluids are compressed to a high densit…
▽ More
The document describes a numerical algorithm to simulate plasmas and fluids in the 3 dimensional space by the Euler method, in which the spatial meshes are fixed to the space. The plasmas and fluids move through the spacial Euler mesh boundary. The Euler method can represent a large deformation of the plasmas and fluids. On the other hand, when the plasmas or fluids are compressed to a high density, the spatial resolution should be ensured to describe the density change precisely. The present 3D Euler code is developed to simulate a nuclear fusion fuel ignition and burning. Therefore, the 3D Euler code includes the DT fuel reactions, the alpha particle diffusion, the alpha particle deposition to heat the DT fuel and the DT fuel depletion by the DT reactions, as well as the thermal energy diffusion based on the three-temperature compressible fluid model.
△ Less
Submitted 8 April, 2020;
originally announced April 2020.
-
Coupling Effects in Multi-Stage Laser Wake-field Acceleration of Electrons
Authors:
Zhan Jin,
Hirotaka Nakamura,
Naveen Pathak,
Yasuo Sakai,
Alexei Zhidkov,
Keiichi Sueda,
Ryosuke Kodama,
Tomonao Hosokai
Abstract:
Staging laser wake-field acceleration is considered as a necessary technique for developing full-optical jitter-free electron accelerators. Splitting of the acceleration length into several technical parts with their lengths smaller than the dephasing length and with independent laser drivers allows generation of stable, reproducible acceleration fields. Temporal and spatial coupling of pre-accele…
▽ More
Staging laser wake-field acceleration is considered as a necessary technique for developing full-optical jitter-free electron accelerators. Splitting of the acceleration length into several technical parts with their lengths smaller than the dephasing length and with independent laser drivers allows generation of stable, reproducible acceleration fields. Temporal and spatial coupling of pre-accelerated electron bunches for their injection in the acceleration phase of a successive laser pulse wake field is the key part of the staging laser-driven acceleration. Here, characterization of the coupling is performed with dense, stable, a narrow energy band <3% and energy selectable electron beams with charges ~1.6 pC and energy ~10 MeV generated from a laser plasma cathode. Cumulative focusing of electron bunches in a low density pre-plasma, exhibiting the Budker- Bennett effect, is shown to result in the efficient injection of electrons even with a long distance between the injector and the booster in the laser pulse wake. Measured characteristics of electron beams modified by the booster wake field agree well with those obtained by multidimensional particle-in-cell simulations.
△ Less
Submitted 4 August, 2019;
originally announced August 2019.
-
Computational Investigations of the Lithium Superoxide Dimer Rearrangement on Noisy Quantum Devices
Authors:
Qi Gao,
Hajime Nakamura,
Tanvi P. Gujarati,
Gavin O. Jones,
Julia E. Rice,
Stephen P. Wood,
Marco Pistoia,
Jeannette M. Garcia,
Naoki Yamamoto
Abstract:
Currently available noisy intermediate-scale quantum (NISQ) devices are limited by the number of qubits that can be used for quantum chemistry calculations on molecules. We show herein that the number of qubits required for simulations on a quantum computer can be reduced by limiting the number of orbitals in the active space. Thus, we have utilized ansätze that approximate exact classical matrix…
▽ More
Currently available noisy intermediate-scale quantum (NISQ) devices are limited by the number of qubits that can be used for quantum chemistry calculations on molecules. We show herein that the number of qubits required for simulations on a quantum computer can be reduced by limiting the number of orbitals in the active space. Thus, we have utilized ansätze that approximate exact classical matrix eigenvalue decomposition methods (Full Configuration Interaction). Such methods are appropriate for computations with the Variational Quantum Eigensolver algorithm to perform computational investigations on the rearrangement of the lithium superoxide dimer with both quantum simulators and quantum devices. These results demonstrate that, even with a limited orbital active space, quantum simulators are capable of obtaining energy values that are similar to the exact ones. However, calculations on quantum hardware underestimate energies even after the application of readout error mitigation.
△ Less
Submitted 23 August, 2019; v1 submitted 25 June, 2019;
originally announced June 2019.
-
Bright X-ray radiation from plasma bubbles in an evolving laser wakefield accelerator
Authors:
M. S. Bloom,
M. J. V. Streeter,
S. Kneip,
R. A. Bendoyro,
O. Cheklov,
J. M. Cole,
A. Doepp,
C. J. Hooker,
J. Holloway,
J. Jiang,
N. C. Lopes,
H. Nakamura,
P. A. Norreys,
P. P. Rajeev,
D. R. Symes,
J. Schreiber,
J. C. Wood,
M. Wing,
Z. Najmudin,
S. P. D. Mangles
Abstract:
We show that the properties of the electron beam and bright x-rays produced by a laser wakefield accelerator can be predicted if the distance over which the laser self-focuses and compresses prior to self-injection is taken into account. A model based on oscillations of the beam inside a plasma bubble shows that performance is optimised when the plasma length is matched to the laser depletion leng…
▽ More
We show that the properties of the electron beam and bright x-rays produced by a laser wakefield accelerator can be predicted if the distance over which the laser self-focuses and compresses prior to self-injection is taken into account. A model based on oscillations of the beam inside a plasma bubble shows that performance is optimised when the plasma length is matched to the laser depletion length. With a 200~TW laser pulse this results in an x-ray beam with median photon energy of \unit[20]{keV}, $> 6\times 10^{8}$ photons above \unit[1]{keV} per shot and a peak brightness of $\unit[3 \times 10^{22}]{photons~s^{-1}mrad^{-2}mm^{-2} (0.1\% BW)^{-1}}$.
△ Less
Submitted 6 May, 2020; v1 submitted 16 October, 2017;
originally announced October 2017.
-
Observation of Laser Power Amplification in a Self-Injecting Laser Wakefield Accelerator
Authors:
M. J. V. Streeter,
S. Kneip,
M. S. Bloom,
R. A. Bendoyro,
O. Chekhlov,
A. E. Dangor,
A. Döpp,
C. J. Hooker,
J. Holloway,
J. Jiang,
N. C. Lopes,
H. Nakamura,
P. A. Norreys,
C. A. J. Palmer,
P. P. Rajeev,
J. Schreiber,
D. R. Symes,
M. Wing,
S. P. D. Mangles,
Z. Najmudin
Abstract:
We report on the depletion and power amplification of the driving laser pulse in a strongly-driven laser wakefield accelerator. Simultaneous measurement of the transmitted pulse energy and temporal shape indicate an increase in peak power from $187 \pm 11$ TW to a maximum of $318 \pm 12$ TW after 13 mm of propagation in plasma density of $0.9 \times 10^{18}$ cm$^{-3}$. The power amplification is c…
▽ More
We report on the depletion and power amplification of the driving laser pulse in a strongly-driven laser wakefield accelerator. Simultaneous measurement of the transmitted pulse energy and temporal shape indicate an increase in peak power from $187 \pm 11$ TW to a maximum of $318 \pm 12$ TW after 13 mm of propagation in plasma density of $0.9 \times 10^{18}$ cm$^{-3}$. The power amplification is correlated with the injection and acceleration of electrons in the nonlinear wakefield. This process is modeled by including localized redshift and subsequent group delay dispersion at the laser pulse front.
△ Less
Submitted 21 June, 2018; v1 submitted 15 October, 2017;
originally announced October 2017.
-
Insight of breaking of powerful axisymmetrically-polarized laser pulses in under-dense plasma
Authors:
Nobuhiko Nakanii,
Tomonao Hosokai,
Naveen C. Pathak,
Shinichi Masuda,
Alexei G. Zhidkov,
Hiroki Nakahara,
Kenta Iwasa,
Yoshio Mizuta,
Naoki Takeguchi,
Takamitsu P. Otsuka,
Keiichi Sueda,
Hirotaka Nakamura,
Michiaki Mori,
Masaki Kando,
Ryosuke Kodama
Abstract:
Interaction of axisymmetrically-polarized (radially or azimuthally-polarized), relativistically intense laser pulses (ALP) with under-dense plasma is shown experimentally to be different from the interaction of conventional Gaussian pulses. The difference is clearly observed in distinct spectra of scattered laser light as well as in appearance of a strong side emission of second harmonic in the vi…
▽ More
Interaction of axisymmetrically-polarized (radially or azimuthally-polarized), relativistically intense laser pulses (ALP) with under-dense plasma is shown experimentally to be different from the interaction of conventional Gaussian pulses. The difference is clearly observed in distinct spectra of scattered laser light as well as in appearance of a strong side emission of second harmonic in the vicinity of focus spot. According 3D particle-in-cell simulations, this is a result of instability in the propagation of ALP in under-dense plasma. Laser wakefield acceleration of electrons by ALP, therefore, is less efficient than that by Gaussian laser pulses but ALP may be interesting for efficient electron self-injection.
△ Less
Submitted 2 November, 2015;
originally announced November 2015.
-
Calibration of Time Of Flight Detectors Using Laser-driven Neutron Source
Authors:
S. R. Mirfayzi,
S. Kar,
H. Ahmed,
A. G. Krygier,
A. Green,
A. Alejo,
R. Clarke,
R. R. Freeman,
J. Fuchs,
D. Jung,
A. Kleinschmidt,
J. T. Morrison,
Z. Najmudin,
H. Nakamura,
P. Norreys,
M. Oliver,
M. Roth,
L. Vassura,
M. Zepf,
M. Borghesi
Abstract:
Calibration of three scintillators (EJ232Q, BC422Q and EJ410) in a time-of-flight (TOF) arrangement using a laser drive-neutron source is presented. The three plastic scintillator detectors were calibrated with gamma insensitive bubble detector spectrometers, which were absolutely calibrated over a wide range of neutron energies ranging from sub MeV to 20 MeV. A typical set of data obtained simult…
▽ More
Calibration of three scintillators (EJ232Q, BC422Q and EJ410) in a time-of-flight (TOF) arrangement using a laser drive-neutron source is presented. The three plastic scintillator detectors were calibrated with gamma insensitive bubble detector spectrometers, which were absolutely calibrated over a wide range of neutron energies ranging from sub MeV to 20 MeV. A typical set of data obtained simultaneously by the detectors are shown, measuring the neutron spectrum emitted from a petawatt laser irradiated thin foil.
△ Less
Submitted 15 June, 2015;
originally announced June 2015.
-
Selective Deuterium Ion Acceleration Using the Vulcan PW Laser
Authors:
AG Krygier,
JT Morrison,
S Kar,
H Ahmed,
A Alejo,
R Clarke,
J Fuchs,
A Green,
D Jung,
A Kleinschmidt,
Z Najmudin,
H Nakamura,
P Norreys,
M Notley,
M Oliver,
M Roth,
L Vassura,
M Zepf,
M Borghesi,
RR Freeman
Abstract:
We report on the successful demonstration of selective acceleration of deuterium ions by target-normal sheath acceleration (TNSA) with a high-energy petawatt laser. TNSA typically produces a multi-species ion beam that originates from the intrinsic hydrocarbon and water vapor contaminants on the target surface. Using the method first developed by Morrison, et al.,$^{1}$ an ion beam with $>$99$\%$…
▽ More
We report on the successful demonstration of selective acceleration of deuterium ions by target-normal sheath acceleration (TNSA) with a high-energy petawatt laser. TNSA typically produces a multi-species ion beam that originates from the intrinsic hydrocarbon and water vapor contaminants on the target surface. Using the method first developed by Morrison, et al.,$^{1}$ an ion beam with $>$99$\%$ deuterium ions and peak energy 14 MeV/nucleon is produced with a 200 J, 700 fs, $>10^{20} W/cm^{2}$ laser pulse by cryogenically freezing heavy water (D$_{2}$O) vapor onto the rear surface of the target prior to the shot. Within the range of our detectors (0-8.5$^{\circ}$), we find laser-to-deuterium-ion energy conversion efficiency of 4.3$\%$ above 0.7 MeV/nucleon while a conservative estimate of the total beam gives a conversion efficiency of 9.4$\%$.
△ Less
Submitted 10 April, 2015; v1 submitted 26 January, 2015;
originally announced January 2015.
-
Characterisation of deuterium spectra from laser driven multi-species sources by employing differentially filtered image plate detectors in Thomson spectrometers
Authors:
A. Alejo,
S. Kar,
H. Ahmed,
A. G. Krygier,
D. Doria,
R. Clarke,
J. Fernandez,
R. R. Freeman,
J. Fuchs,
A. Green,
J. S. Green,
D. Jung,
A. Kleinschmidt,
C. L. S. Lewis,
J. T. Morrison,
Z. Najmudin,
H. Nakamura,
G. Nersisyan,
P. Norreys,
M. Notley,
M. Oliver,
M. Roth,
J. A. Ruiz,
L. Vassura,
M. Zepf
, et al. (1 additional authors not shown)
Abstract:
A novel method for characterising the full spectrum of deuteron ions emitted by laser driven multi-species ion sources is discussed. The procedure is based on using differential filtering over the detector of a Thompson parabola ion spectrometer, which enables discrimination of deuterium ions from heavier ion species with the same charge-to-mass ratio (such as C6+, O8+, etc.). Commonly used Fuji I…
▽ More
A novel method for characterising the full spectrum of deuteron ions emitted by laser driven multi-species ion sources is discussed. The procedure is based on using differential filtering over the detector of a Thompson parabola ion spectrometer, which enables discrimination of deuterium ions from heavier ion species with the same charge-to-mass ratio (such as C6+, O8+, etc.). Commonly used Fuji Image plates were used as detectors in the spectrometer, whose absolute response to deuterium ions over a wide range of energies was calibrated by using slotted CR-39 nuclear track detectors. A typical deuterium ion spectrum diagnosed in a recent experimental campaign is presented.
△ Less
Submitted 14 September, 2014; v1 submitted 13 August, 2014;
originally announced August 2014.
-
Local representation of N-body Coulomb energy with path integrals
Authors:
Takanori Sugihara,
Junichi Higo,
Haruki Nakamura
Abstract:
We represent N-body Coulomb energy in a localized form to achieve massive parallelism. It is a well-known fact that Green's functions can be written as path integrals of field theory. Since two-body Coulomb potential is a Green's function of Poisson equations, it reduces to a path integral of free scalar field theory with three spatial dimensions. This means that N-body one also reduces to a path…
▽ More
We represent N-body Coulomb energy in a localized form to achieve massive parallelism. It is a well-known fact that Green's functions can be written as path integrals of field theory. Since two-body Coulomb potential is a Green's function of Poisson equations, it reduces to a path integral of free scalar field theory with three spatial dimensions. This means that N-body one also reduces to a path integral. We discretize real space with a cubic lattice and evaluate the obtained multiple integrals approximately with the Markov-chain Monte Carlo method.
△ Less
Submitted 18 April, 2014; v1 submitted 4 March, 2014;
originally announced March 2014.
-
Formation and Classification of Amorphous Carbon by Molecular Dynamics Simulation
Authors:
Atsushi M. Ito,
Arimichi Takayama,
Seiki Saito,
Hiroaki Nakamura
Abstract:
By using molecular dynamics simulation, formation mechanisms of amorphous carbon in particular sp${}^3$ rich structure was researched. The problem that reactive empirical bond order potential cannot represent amorphous carbon properly was cleared in the transition process from graphite to diamond by high pressure and the deposition process of amorphous carbon thin films. Moreover, the new potentia…
▽ More
By using molecular dynamics simulation, formation mechanisms of amorphous carbon in particular sp${}^3$ rich structure was researched. The problem that reactive empirical bond order potential cannot represent amorphous carbon properly was cleared in the transition process from graphite to diamond by high pressure and the deposition process of amorphous carbon thin films. Moreover, the new potential model which is based on electron distribution simplified as a point charge was developed by using downfolding method. As a result, the molecular dynamics simulation with the new potential could demonstrate the transition from graphite to diamond at the pressure of 15 GPa corresponding to experiment and the deposition of sp${}^3$ rich amorphous carbon.
△ Less
Submitted 4 July, 2012;
originally announced July 2012.
-
Hybrid Simulation between Molecular Dynamics and Binary Collision Approximation Codes for Hydrogen injection onto Carbon Materials
Authors:
Seiki Saito,
Atsushi M. Ito,
Arimichi Takayama,
Takahiro Kenmotsu,
Hiroaki Nakamura
Abstract:
Molecular dynamics (MD) simulation with modified Brenner's reactive empirical bond order (REBO) potential is a powerful tool to investigate plasma wall interaction on divertor plates in a nuclear fusion device. However, MD simulation box's size is less than several nm for the performance of a computer. To extend the size of the MD simulation, we develop a hybrid simulation code between MD code usi…
▽ More
Molecular dynamics (MD) simulation with modified Brenner's reactive empirical bond order (REBO) potential is a powerful tool to investigate plasma wall interaction on divertor plates in a nuclear fusion device. However, MD simulation box's size is less than several nm for the performance of a computer. To extend the size of the MD simulation, we develop a hybrid simulation code between MD code using REBO potential and binary collision approximation (BCA) code. Using the BCA code instead of computing all particles with a high kinetic energy for every step in the MD simulation, considerable computation time is saved. By demonstrating a hydrogen atom injection on a graphite by the hybrid simulation code, it is found that the hybrid simulation code works efficiently in a large simulation box.
△ Less
Submitted 25 June, 2010; v1 submitted 23 June, 2010;
originally announced June 2010.
-
Extension of the simulation code ACAT to treat real atomic positions
Authors:
Arimichi Takayama,
Seiki Saito,
Atsushi M. Ito,
Takahiro Kenmotsu,
Hiroaki Nakamura
Abstract:
We have investigated plasma-surface interactions with molecular dynamics (MD) simulations. It, however, is high cost computation and is limited to simulations for materials of nanometer order. In order to overcome the limitation, a complementary model based on binary collision approximation (BCA) can be established. We employed a BCA-based simulation code ACAT and extended to handle any structure…
▽ More
We have investigated plasma-surface interactions with molecular dynamics (MD) simulations. It, however, is high cost computation and is limited to simulations for materials of nanometer order. In order to overcome the limitation, a complementary model based on binary collision approximation (BCA) can be established. We employed a BCA-based simulation code ACAT and extended to handle any structure involving crystalline and amorphous. The extended code, named "ACaT", stores all positions of projectile and target atoms and velocities of recoil atoms, so it can be combined with the MD code. It also holds the potential to reproduce channeling phenomena. Thus it is expected to be useful for evaluation of channeling effects.
△ Less
Submitted 18 May, 2010;
originally announced May 2010.
-
Incident angle dependence of reactions between graphene and hydrogen atom by molecular dynamics simulation
Authors:
Seiki Saito,
Atsushi Ito,
Hiroaki Nakamura
Abstract:
Incident angle dependence of reactions between graphene and hydrogen atoms are obtained qualitatively by classical molecular dynamics simulation under the NVE condition with modified Brenner reactive empirical bond order (REBO) potential. Chemical reaction depends on two parameters, i.e., polar angle $θ$ and azimuthal angle $φ$ of the incident hydrogen. From the simulation results, it is found t…
▽ More
Incident angle dependence of reactions between graphene and hydrogen atoms are obtained qualitatively by classical molecular dynamics simulation under the NVE condition with modified Brenner reactive empirical bond order (REBO) potential. Chemical reaction depends on two parameters, i.e., polar angle $θ$ and azimuthal angle $φ$ of the incident hydrogen. From the simulation results, it is found that the reaction rates strongly depend on polar angle $θ$. Reflection rate becomes larger with increasing $θ$, and the $θ$ dependence of adsorption rate is also found. The $θ$ dependence is caused by three dimensional structure of the small potential barrier which covers adsorption sites. $φ$ dependence of penetration rate is also found for large $θ$.
△ Less
Submitted 14 December, 2009;
originally announced December 2009.
-
Parallelization of Markov chain generation and its application to the multicanonical method
Authors:
Takanori Sugihara,
Junichi Higo,
Haruki Nakamura
Abstract:
We develop a simple algorithm to parallelize generation processes of Markov chains. In this algorithm, multiple Markov chains are generated in parallel and jointed together to make a longer Markov chain. The joints between the constituent Markov chains are processed using the detailed balance. We apply the parallelization algorithm to multicanonical calculations of the two-dimensional Ising mode…
▽ More
We develop a simple algorithm to parallelize generation processes of Markov chains. In this algorithm, multiple Markov chains are generated in parallel and jointed together to make a longer Markov chain. The joints between the constituent Markov chains are processed using the detailed balance. We apply the parallelization algorithm to multicanonical calculations of the two-dimensional Ising model and demonstrate accurate estimation of multicanonical weights.
△ Less
Submitted 1 July, 2009; v1 submitted 15 December, 2008;
originally announced December 2008.
-
Some properties of the resonant state in quantum mechanics and its computation
Authors:
Naomichi Hatano,
Keita Sasada,
Hiroaki Nakamura,
Tomio Petrosky
Abstract:
The resonant state of the open quantum system is studied from the viewpoint of the outgoing momentum flux. We show that the number of particles is conserved for a resonant state, if we use an expanding volume of integration in order to take account of the outgoing momentum flux; the number of particles would decay exponentially in a fixed volume of integration. Moreover, we introduce new numeric…
▽ More
The resonant state of the open quantum system is studied from the viewpoint of the outgoing momentum flux. We show that the number of particles is conserved for a resonant state, if we use an expanding volume of integration in order to take account of the outgoing momentum flux; the number of particles would decay exponentially in a fixed volume of integration. Moreover, we introduce new numerical methods of treating the resonant state with the use of the effective potential. We first give a numerical method of finding a resonance pole in the complex energy plane. The method seeks an energy eigenvalue iteratively. We found that our method leads to a super-convergence, the convergence exponential with respect to the iteration step. The present method is completely independent of commonly used complex scaling. We also give a numerical trick for computing the time evolution of the resonant state in a limited spatial area. Since the wave function of the resonant state is diverging away from the scattering potential, it has been previously difficult to follow its time evolution numerically in a finite area.
△ Less
Submitted 6 August, 2007; v1 submitted 10 May, 2007;
originally announced May 2007.
-
Design and optimization of tapered structure of near-field fiber probe based on FDTD simulation
Authors:
Hiroaki Nakamura,
Tetsuya Sato,
Hirotomo Kambe,
Keiji Sawada,
Toshiharu Saiki
Abstract:
The finite-difference time-domain method was employed to simulate light propagation in tapered near-field fiber probes with small metal aperture. By conducting large-volume simulations, including tapered metal-cladding waveguide and connected optical fiber waveguide, we illustrated the coupling between these guiding modes as well as the electric field distribution in the vicinity of the aperture…
▽ More
The finite-difference time-domain method was employed to simulate light propagation in tapered near-field fiber probes with small metal aperture. By conducting large-volume simulations, including tapered metal-cladding waveguide and connected optical fiber waveguide, we illustrated the coupling between these guiding modes as well as the electric field distribution in the vicinity of the aperture. The high collection efficiency of a double-tapered probe was reproduced and was ascribed to the shortening of the cutoff region and the efficient coupling to the guiding mode of the optical fiber. The dependence of the efficiency on the tapered structure parameters was also examined.
△ Less
Submitted 4 October, 2000; v1 submitted 3 October, 2000;
originally announced October 2000.
-
Spatial Resolution of Near-Field Scanning Optical Microscopy with Sub-wavelength Aperture
Authors:
H. Nakamura,
K. Sawada,
H. Kambe,
T . Saiki,
T. Sato
Abstract:
The finite-difference time-domain (FDTD) method is employed to solve the three dimensional Maxwell equation for the situation of near-field microscopy using a sub-wavelength aperture. Experimental result on unexpected high spatial resolution is reproduced by our computer simulation.
The finite-difference time-domain (FDTD) method is employed to solve the three dimensional Maxwell equation for the situation of near-field microscopy using a sub-wavelength aperture. Experimental result on unexpected high spatial resolution is reproduced by our computer simulation.
△ Less
Submitted 1 November, 1999;
originally announced November 1999.
