Showing 1–50 of 50 results for author: Marshall, M

Angular dependent measurement of electron-ion recombination in liquid argon for ionization calorimetry in the ICARUS liquid argon time projection chamber

Authors: ICARUS collaboration, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewicz, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, S. Berkman, S. Bertolucci, M. Betancourt, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio, C. Brizzolari, H. S. Budd A. Campani , et al. (154 additional authors not shown)

Abstract: This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are us… ▽ More This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are used for the calorimetric energy scale calibration of the ICARUS TPC, which is also presented. The impact of the EMB model is studied on calorimetric particle identification, as well as muon and proton energy measurements. Accounting for the angular dependence in EMB recombination improves the accuracy and precision of these measurements. △ Less

Submitted 17 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0332-PPD

Calibration and simulation of ionization signal and electronics noise in the ICARUS liquid argon time projection chamber

Authors: ICARUS collaboration, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewicz, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, S. Berkman, S. Bertolucci, M. Betancourt, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio, C. Brizzolari, H. S. Budd A. Campani , et al. (153 additional authors not shown)

Abstract: The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedu… ▽ More The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedure removes non-uniformities in the ICARUS TPC response to charge in space and time. This work leverages the copious number of cosmic ray muons available to ICARUS at the surface. The ionization signal shape simulation applies a novel procedure that tunes the simulation to match what is measured in data. The end result of the equalization procedure and simulation tuning allows for a comparison of charge measurements in ICARUS between Monte Carlo simulation and data, showing good performance with minimal residual bias between the two. △ Less

Submitted 16 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0330-PPD

Supernova Pointing Capabilities of DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr… ▽ More The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Comments: 25 pages, 16 figures

Report number: FERMILAB-PUB-24-0319-LBNF

Quantitative phase imaging via a multimode fiber

Authors: Aleksandra Ivanina, Maxim Marshall, Ksenia Abrashitova, Tristan van Leeuwen, Lyubov V. Amitonova

Abstract: Label-free quantitative phase imaging is a vital tool for optical microscopy and metrology applications. A hair-thin multimode fiber stands out as a very attractive platform for minimally invasive imaging. Here we propose and experimentally demonstrate a non-interferometric non-iterative approach for high-speed high-resolution label-free quantitative phase imaging via a multimode fiber, unlocking… ▽ More Label-free quantitative phase imaging is a vital tool for optical microscopy and metrology applications. A hair-thin multimode fiber stands out as a very attractive platform for minimally invasive imaging. Here we propose and experimentally demonstrate a non-interferometric non-iterative approach for high-speed high-resolution label-free quantitative phase imaging via a multimode fiber, unlocking multiple applications in life science and bioimaging. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Determining Molecular Complexity using Assembly Theory and Spectroscopy

Authors: Michael Jirasek, Abhishek Sharma, Jessica R. Bame, S. Hessam M. Mehr, Nicola Bell, Stuart M. Marshall, Cole Mathis, Alasdair Macleod, Geoffrey J. T. Cooper, Marcel Swart, Rosa Mollfulleda, Leroy Cronin

Abstract: Determining the complexity of molecules has important applications from molecular design to understanding the history of the process that led to the formation of the molecule. Currently, it is not possible to experimentally determine, without full structure elucidation, how complex a molecule is. Assembly Theory has been developed to quantify the complexity of a molecule by finding the shortest pa… ▽ More Determining the complexity of molecules has important applications from molecular design to understanding the history of the process that led to the formation of the molecule. Currently, it is not possible to experimentally determine, without full structure elucidation, how complex a molecule is. Assembly Theory has been developed to quantify the complexity of a molecule by finding the shortest path to construct the molecule from building blocks, revealing its molecular assembly index (MA). In this study, we present an approach to rapidly and exhaustively calculate the MA of molecules from the spectroscopic measurements. We demonstrate that molecular complexity (MA) can be experimentally estimated using three independent techniques: nuclear magnetic resonance (NMR), tandem mass spectrometry (MS/MS), and infrared spectroscopy (IR), and these give consistent results with good correlations with the theoretically determined values from assembly theory. By identifying and analysing the number of absorbances in IR spectra, carbon resonances in NMR, or molecular fragments in tandem MS, the molecular assembly of an unknown molecule can be reliably estimated from experimental data. This represents the first experimentally quantifiable approach to defining molecular assembly, a reliable metric for complexity, as an intrinsic property of molecules and can also be performed on complex mixtures. This paves the way to use spectroscopic and spectrometric techniques to unambiguously detect alien life in the solar system, and beyond on exoplanets. △ Less

Submitted 7 November, 2023; v1 submitted 24 February, 2023; originally announced February 2023.

Comments: 27 pages, 7 figures plus supplementary data

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

Directional Detection of Dark Matter Using Solid-State Quantum Sensing

Authors: Reza Ebadi, Mason C. Marshall, David F. Phillips, Johannes Cremer, Tao Zhou, Michael Titze, Pauli Kehayias, Maziar Saleh Ziabari, Nazar Delegan, Surjeet Rajendran, Alexander O. Sushkov, F. Joseph Heremans, Edward S. Bielejec, Martin V. Holt, Ronald L. Walsworth

Abstract: Next-generation dark matter (DM) detectors searching for weakly interacting massive particles (WIMPs) will be sensitive to coherent scattering from solar neutrinos, demanding an efficient background-signal discrimination tool. Directional detectors improve sensitivity to WIMP DM despite the irreducible neutrino background. Wide-bandgap semiconductors offer a path to directional detection in a high… ▽ More Next-generation dark matter (DM) detectors searching for weakly interacting massive particles (WIMPs) will be sensitive to coherent scattering from solar neutrinos, demanding an efficient background-signal discrimination tool. Directional detectors improve sensitivity to WIMP DM despite the irreducible neutrino background. Wide-bandgap semiconductors offer a path to directional detection in a high-density target material. A detector of this type operates in a hybrid mode. The WIMP or neutrino-induced nuclear recoil is detected using real-time charge, phonon, or photon collection. The directional signal, however, is imprinted as a durable sub-micron damage track in the lattice structure. This directional signal can be read out by a variety of atomic physics techniques, from point defect quantum sensing to x-ray microscopy. In this white paper, we present the detector principle and review the status of the experimental techniques required for directional readout of nuclear recoil tracks. Specifically, we focus on diamond as a target material; it is both a leading platform for emerging quantum technologies and a promising component of next-generation semiconductor electronics. Based on the development and demonstration of directional readout in diamond over the next decade, a future WIMP detector will leverage or motivate advances in multiple disciplines towards precision dark matter and neutrino physics. △ Less

Submitted 14 June, 2023; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021, 30 pages + references, 14 figures; v3: journal format (20 pages + references, 14 figures), journal reference added

Journal ref: AVS Quantum Sci. 4, 044701 (2022)

Low-Energy Physics in Neutrino LArTPCs

Authors: D. Caratelli, W. Foreman, A. Friedland, S. Gardiner, I. Gil-Botella, G. Karagiorgi, M. Kirby, G. Lehmann Miotto, B. R. Littlejohn, M. Mooney, J. Reichenbacher, A. Sousa, K. Scholberg, J. Yu, T. Yang, S. Andringa, J. Asaadi, T. J. C. Bezerra, F. Capozzi, F. Cavanna, E. Church, A. Himmel, T. Junk, J. Klein, I. Lepetic , et al. (264 additional authors not shown)

Abstract: In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below… ▽ More In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below the few tens of MeV range. 2) Low-energy signatures are an integral part of GeV-scale accelerator neutrino interaction final states, and their reconstruction can enhance the oscillation physics sensitivities of LArTPC experiments. 3) BSM signals from accelerator and natural sources also generate diverse signatures in the low-energy range, and reconstruction of these signatures can increase the breadth of BSM scenarios accessible in LArTPC-based searches. 4) Neutrino interaction cross sections and other nuclear physics processes in argon relevant to sub-hundred-MeV LArTPC signatures are poorly understood. Improved theory and experimental measurements are needed. Pion decay-at-rest sources and charged particle and neutron test beams are ideal facilities for experimentally improving this understanding. 5) There are specific calibration needs in the low-energy range, as well as specific needs for control and understanding of radiological and cosmogenic backgrounds. 6) Novel ideas for future LArTPC technology that enhance low-energy capabilities should be explored. These include novel charge enhancement and readout systems, enhanced photon detection, low radioactivity argon, and xenon doping. 7) Low-energy signatures, whether steady-state or part of a supernova burst or larger GeV-scale event topology, have specific triggering, DAQ and reconstruction requirements that must be addressed outside the scope of conventional GeV-scale data collection and analysis pathways. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1132 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t… ▽ More The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Report number: FERMILAB-PUB-21-391-ND

Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti, M. P. Andrews , et al. (1158 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components. △ Less

Submitted 23 September, 2021; v1 submitted 4 August, 2021; originally announced August 2021.

High-precision mapping of diamond crystal strain using quantum interferometry

Authors: Mason C. Marshall, Reza Ebadi, Connor Hart, Matthew J. Turner, Mark J. H. Ku, David F. Phillips, Ronald L. Walsworth

Abstract: Crystal strain variation imposes significant limitations on many quantum sensing and information applications for solid-state defect qubits in diamond. Thus, precision measurement and control of diamond crystal strain is a key challenge. Here, we report diamond strain measurements with a unique set of capabilities, including micron-scale spatial resolution, millimeter-scale field-of-view, and a tw… ▽ More Crystal strain variation imposes significant limitations on many quantum sensing and information applications for solid-state defect qubits in diamond. Thus, precision measurement and control of diamond crystal strain is a key challenge. Here, we report diamond strain measurements with a unique set of capabilities, including micron-scale spatial resolution, millimeter-scale field-of-view, and a two order-of-magnitude improvement in volume-normalized sensitivity over previous work [1], reaching $5(2) \times 10^{-8}/\sqrt{\rm{Hz}\cdot\rm{μm}^3}$ (with spin-strain coupling coefficients representing the dominant systematic uncertainty). We use strain-sensitive spin-state interferometry on ensembles of nitrogen vacancy (NV) color centers in single-crystal CVD bulk diamond with low strain gradients. This quantum interferometry technique provides insensitivity to magnetic-field inhomogeneity from the electronic and nuclear spin bath, thereby enabling long NV ensemble electronic spin dephasing times and enhanced strain sensitivity. We demonstrate the strain-sensitive measurement protocol first on a scanning confocal laser microscope, providing quantitative measurement of sensitivity as well as three-dimensional strain mapping; and second on a wide-field imaging quantum diamond microscope (QDM). Our strain microscopy technique enables fast, sensitive characterization for diamond material engineering and nanofabrication; as well as diamond-based sensing of strains applied externally, as in diamond anvil cells or embedded diamond stress sensors, or internally, as by crystal damage due to particle-induced nuclear recoils. △ Less

Submitted 12 October, 2022; v1 submitted 31 July, 2021; originally announced August 2021.

Comments: 14 pages, 8 figures

Journal ref: Phys. Rev. Applied 17, 024041 (2022)

Deep Underground Neutrino Experiment (DUNE) Near Detector Conceptual Design Report

Authors: A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, N. Anfimov, A. Ankowski, M. Antonova, S. Antusch , et al. (1041 additional authors not shown)

Abstract: This report describes the conceptual design of the DUNE near detector This report describes the conceptual design of the DUNE near detector △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: 314 pages, 185 figures

Report number: FERMILAB-PUB-21-067-E-LBNF-PPD-SCD-T

Scanning X-ray Diffraction Microscopy for Diamond Quantum Sensing

Authors: Mason C. Marshall, David F. Phillips, Matthew J. Turner, Mark J. H. Ku, Tao Zhou, Nazar Delegan, F. Joseph Heremans, Martin V. Holt, Ronald L. Walsworth

Abstract: Understanding nano- and micro-scale crystal strain in CVD diamond is crucial to the advancement of diamond quantum technologies. In particular, the presence of such strain and its characterization present a challenge to diamond-based quantum sensing and information applications -- as well as for future dark matter detectors where directional information of incoming particles is encoded in crystal… ▽ More Understanding nano- and micro-scale crystal strain in CVD diamond is crucial to the advancement of diamond quantum technologies. In particular, the presence of such strain and its characterization present a challenge to diamond-based quantum sensing and information applications -- as well as for future dark matter detectors where directional information of incoming particles is encoded in crystal strain. Here, we exploit nanofocused scanning X-ray diffraction microscopy to quantitatively measure crystal deformation from defects in diamond with high spatial and strain resolution. Combining information from multiple Bragg angles allows stereoscopic three-dimensional modeling of strain feature geometry; the diffraction results are validated via comparison to optical measurements of the strain tensor based on spin-state-dependent spectroscopy of ensembles of nitrogen vacancy (NV) centers in the diamond. Our results demonstrate both strain and spatial resolution sufficient for directional detection of dark matter via X-ray measurement of crystal strain, and provide a promising tool for diamond growth analysis and improvement of defect-based sensing. △ Less

Submitted 14 October, 2022; v1 submitted 15 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. Applied 16, 054032 (2021)

Directional detection of dark matter with diamond

Authors: Mason C. Marshall, Matthew J. Turner, Mark J. H. Ku, David F. Phillips, Ronald L. Walsworth

Abstract: Searches for WIMP dark matter will in the near future be sensitive to solar neutrinos. Directional detection offers a method to reject solar neutrinos and improve WIMP searches, but reaching that sensitivity with existing directional detectors poses challenges. We propose a combined atomic/particle physics approach using a large-volume diamond detector. WIMP candidate events trigger a particle det… ▽ More Searches for WIMP dark matter will in the near future be sensitive to solar neutrinos. Directional detection offers a method to reject solar neutrinos and improve WIMP searches, but reaching that sensitivity with existing directional detectors poses challenges. We propose a combined atomic/particle physics approach using a large-volume diamond detector. WIMP candidate events trigger a particle detector, after which spectroscopy of nitrogen vacancy centers reads out the direction of the incoming particle. We discuss the current state of technologies required to realize directional detection in diamond and present a path towards a detector with sensitivity below the neutrino floor. △ Less

Submitted 3 March, 2021; v1 submitted 2 September, 2020; originally announced September 2020.

Comments: 25 pages, 8 figures

Benchmarking boron carbide equation of state using computation and experiment

Authors: Shuai Zhang, Michelle C. Marshall, Lin H. Yang, Philip A. Sterne, Burkhard Militzer, Markus Daene, James A. Gaffney, Andrew Shamp, Tadashi Ogitsu, Kyle Caspersen, Amy E. Lazicki, David Erskine, Richard A. London, Peter M. Celliers, Joseph Nilsen, Heather D. Whitley

Abstract: Boron carbide (B$_4$C) is of both fundamental scientific and practical interest in inertial confinement fusion (ICF) and high energy density physics experiments. We report the results of a comprehensive computational study of the equation of state (EOS) of B$_4$C in the liquid, warm dense matter, and plasma phases. Our calculations are cross-validated by comparisons with Hugoniot measurements up t… ▽ More Boron carbide (B$_4$C) is of both fundamental scientific and practical interest in inertial confinement fusion (ICF) and high energy density physics experiments. We report the results of a comprehensive computational study of the equation of state (EOS) of B$_4$C in the liquid, warm dense matter, and plasma phases. Our calculations are cross-validated by comparisons with Hugoniot measurements up to 61 megabar from planar shock experiments performed at the National Ignition Facility (NIF). Our computational methods include path integral Monte Carlo, activity expansion, as well as all-electron Green's function Korringa-Kohn-Rostoker and molecular dynamics that are both based on density functional theory. We calculate the pressure-internal energy EOS of B$_4$C over a broad range of temperatures ($\sim$6$\times$10$^3$--5$\times$10$^8$ K) and densities (0.025--50 g/cm$^{3}$). We assess that the largest discrepancies between theoretical predictions are $\lesssim$5% near the compression maximum at 1--2$\times10^6$ K. This is the warm-dense state in which the K shell significantly ionizes and has posed grand challenges to theory and experiment. By comparing with different EOS models, we find a Purgatorio model (LEOS 2122) that agrees with our calculations. The maximum discrepancies in pressure between our first-principles predictions and LEOS 2122 are $\sim$18% and occur at temperatures between 6$\times$10$^3$--2$\times$10$^5$ K, which we believe originate from differences in the ion thermal term and the cold curve that are modeled in LEOS 2122 in comparison with our first-principles calculations. In addition, we have developed three new equation of state models and applied them to 1D hydrodynamic simulations of a polar direct-drive NIF implosion, demonstrating that these new models are now available for future ICF design studies. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comments: 20 pages, 12 figures, 2 tables

Report number: LLNL-JRNL-812984

Journal ref: Phys. Rev. E 102, 053203 (2020)

Comparison of ablators for the polar direct drive exploding pusher platform

Authors: Heather D. Whitley, G. Elijah Kemp, Charles Yeamans, Zachary Walters, Brent E. Blue, Warren Garbett, Marilyn Schneider, R. Stephen Craxton, Emma M. Garcia, Patrick W. McKenty, Maria Gatu-Johnson, Kyle Caspersen, John I. Castor, Markus Däne, C. Leland Ellison, James Gaffney, Frank R. Graziani, John Klepeis, Natalie Kostinski, Andrea Kritcher, Brandon Lahmann, Amy E. Lazicki, Hai P. Le, Richard A. London, Brian Maddox , et al. (14 additional authors not shown)

Abstract: We examine the performance of pure boron, boron carbide, high density carbon, and boron nitride ablators in the polar direct drive exploding pusher (PDXP) platform. The platform uses the polar direct drive configuration at the National Ignition Facility to drive high ion temperatures in a room temperature capsule and has potential applications for plasma physics studies and as a neutron source. Th… ▽ More We examine the performance of pure boron, boron carbide, high density carbon, and boron nitride ablators in the polar direct drive exploding pusher (PDXP) platform. The platform uses the polar direct drive configuration at the National Ignition Facility to drive high ion temperatures in a room temperature capsule and has potential applications for plasma physics studies and as a neutron source. The higher tensile strength of these materials compared to plastic enables a thinner ablator to support higher gas pressures, which could help optimize its performance for plasma physics experiments, while ablators containing boron enable the possiblity of collecting addtional data to constrain models of the platform. Applying recently developed and experimentally validated equation of state models for the boron materials, we examine the performance of these materials as ablators in 2D simulations, with particular focus on changes to the ablator and gas areal density, as well as the predicted symmetry of the inherently 2D implosion. △ Less

Submitted 30 December, 2020; v1 submitted 28 June, 2020; originally announced June 2020.

Report number: LLNL-JRNL-803851

Study of muonium emission from laser-ablated silica aerogel

Authors: J. Beare, G. Beer, J. H. Brewer, T. Iijima, K. Ishida, M. Iwasaki, S. Kamal, K. Kanamori, N. Kawamura, R. Kitamura, S. Li, G. M. Luke, G. M. Marshall, T. Mibe, Y. Miyake, Y. Oishi, K. Olchanski, A. Olin, M. Otani, M. A. Rehman, N. Saito, Y. Sato, K. Shimomura, K. Suzuki, M. Tabata , et al. (1 additional authors not shown)

Abstract: The emission of muonium ($μ^+e^-$) atoms into vacuum from silica aerogel with laser ablation on its surface was studied with various ablation structures at room temperature using the subsurface muon beams at TRIUMF and Japan Proton Accelerator Research Complex (J-PARC). Laser ablation was applied to produce holes or grooves with typical dimensions of a few hundred $μ$m to a few mm, except for some… ▽ More The emission of muonium ($μ^+e^-$) atoms into vacuum from silica aerogel with laser ablation on its surface was studied with various ablation structures at room temperature using the subsurface muon beams at TRIUMF and Japan Proton Accelerator Research Complex (J-PARC). Laser ablation was applied to produce holes or grooves with typical dimensions of a few hundred $μ$m to a few mm, except for some extreme conditions. The measured emission rate tends to be higher for larger fractions of ablation opening and for shallower depths. More than a few ablation structures reach the emission rates similar to the highest achieved in the past measurements. The emission rate is found to be stable at least for a couple of days. Measurements of spin precession amplitudes for the produced muonium atoms and remaining muons in a magnetic field determine a muonium formation fraction of $(65.5 \pm 1.8)$%. The precession of the polarized muonium atoms is also observed clearly in vacuum. A projection of the emission rates measured at TRIUMF to the corresponding rates at J-PARC is demonstrated taking the different beam condition into account reasonably. △ Less

Submitted 1 September, 2020; v1 submitted 2 June, 2020; originally announced June 2020.

Comments: 34 pages, 13 figures, submitted to PTEP

Atomic Precision Advanced Manufacturing for Digital Electronics

Authors: Daniel R. Ward, Scott W. Schmucker, Evan M. Anderson, Ezra Bussmann, Lisa Tracy, Tzu-Ming Lu, Leon N. Maurer, Andrew Baczewski, Deanna M. Campbell, Michael T. Marshall, Shashank Misra

Abstract: An exponential increase in the performance of silicon microelectronics and the demand to manufacture in great volumes has created an ecosystem that requires increasingly complex tools to fabricate and characterize the next generation of chips. However, the cost to develop and produce the next generation of these tools has also risen exponentially, to the point where the risk associated with progre… ▽ More An exponential increase in the performance of silicon microelectronics and the demand to manufacture in great volumes has created an ecosystem that requires increasingly complex tools to fabricate and characterize the next generation of chips. However, the cost to develop and produce the next generation of these tools has also risen exponentially, to the point where the risk associated with progressing to smaller feature sizes has created pain points throughout the ecosystem. The present challenge includes shrinking the smallest features from nanometers to atoms (10 nm corresponds to 30 silicon atoms). Relaxing the requirement for achieving scalable manufacturing creates the opportunity to evaluate ideas not one or two generations into the future, but at the absolute physical limit of atoms themselves. This article describes recent advances in atomic precision advanced manufacturing (APAM) that open the possibility of exploring opportunities in digital electronics. Doing so will require advancing the complexity of APAM devices and integrating APAM with CMOS. △ Less

Submitted 25 February, 2020; originally announced February 2020.

Journal ref: Electronic Device Failure Analysis, 22 (2020) 1:4-10

Low Thermal Budget High-k/Metal Surface Gate for Buried Donor-Based Devices

Authors: Evan M. Anderson, DeAnna M. Campbell, Leon N. Maurer, Andrew D. Baczewski, Michael T. Marshall, Tzu-Ming Lu, Ping Lu, Lisa A. Tracy, Scott W. Schmucker, Daniel R. Ward, Shashank Misra

Abstract: Atomic precision advanced manufacturing (APAM) offers creation of donor devices in an atomically thin layer doped beyond the solid solubility limit, enabling unique device physics. This presents an opportunity to use APAM as a pathfinding platform to investigate digital electronics at the atomic limit. Scaling to smaller transistors is increasingly difficult and expensive, necessitating the invest… ▽ More Atomic precision advanced manufacturing (APAM) offers creation of donor devices in an atomically thin layer doped beyond the solid solubility limit, enabling unique device physics. This presents an opportunity to use APAM as a pathfinding platform to investigate digital electronics at the atomic limit. Scaling to smaller transistors is increasingly difficult and expensive, necessitating the investigation of alternative fabrication paths that extend to the atomic scale. APAM donor devices can be created using a scanning tunneling microscope (STM). However, these devices are not currently compatible with industry standard fabrication processes. There exists a tradeoff between low thermal budget (LT) processes to limit dopant diffusion and high thermal budget (HT) processes to grow defect-free layers of epitaxial Si and gate oxide. To this end, we have developed an LT epitaxial Si cap and LT deposited Al2O3 gate oxide integrated with an atomically precise single-electron transistor (SET) that we use as an electrometer to characterize the quality of the gate stack. The surface-gated SET exhibits the expected Coulomb blockade behavior. However, the leverage of the gate over the SET is limited by defects in the layers above the SET, including interfaces between the Si and oxide, and structural and chemical defects in the Si cap. We propose a more sophisticated gate stack and process flow that is predicted to improve performance in future atomic precision devices. △ Less

Submitted 11 June, 2020; v1 submitted 20 February, 2020; originally announced February 2020.

Comments: Version accepted for open access publication in Journal of Physics: Materials. Added keywords, additional text to the abstract, additional discussion of interfaces, and additional references. Consolidated references into one section at the end of the document instead of one part for the main article and one part for the supplementary material

SND@LHC

Authors: SHiP Collaboration, C. Ahdida, A. Akmete, R. Albanese, A. Alexandrov, M. Andreini, A. Anokhina, S. Aoki, G. Arduini, E. Atkin, N. Azorskiy, J. J. Back, A. Bagulya, F. Baaltasar Dos Santos, A. Baranov, F. Bardou, G. J. Barker, M. Battistin, J. Bauche, A. Bay, V. Bayliss, G. Bencivenni, A. Y. Berdnikov, Y. A. Berdnikov, M. Bertani , et al. (319 additional authors not shown)

Abstract: We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)… ▽ More We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment. △ Less

Submitted 20 February, 2020; originally announced February 2020.

Comments: Letter of Intent

Report number: CERN-LHCC-2020-002, LHCC-I-035

A New Concept for Kilotonne Scale Liquid Argon Time Projection Chambers

Authors: M. Auger, R. Berner, Y. Chen, A. Ereditato, D. Goeldi, P. P. Koller, I. Kreslo, D. Lorca, T. Mettler, F. Piastra, J. R. Sinclair, M. Weber, C. Wilkinson, M. Convery, L. Domine, F. Drielsma, R. Itay, D. H. Koh, H. A. Tanaka, K. Terao, P. Tsang, T. Usher, D. A. Dwyer, S. Kohn, P. Madigan , et al. (3 additional authors not shown)

Abstract: We develop a novel approach for a Time Projection Chamber (TPC) concept suitable for deployment in kilotonne scale detectors, with a charge-readout system free from reconstruction ambiguities, and a robust TPC design that reduces high-voltage risks while increasing the coverage of the light collection system. This novel concept could be deployed as a Far Detector module in the Deep Underground Neu… ▽ More We develop a novel approach for a Time Projection Chamber (TPC) concept suitable for deployment in kilotonne scale detectors, with a charge-readout system free from reconstruction ambiguities, and a robust TPC design that reduces high-voltage risks while increasing the coverage of the light collection system. This novel concept could be deployed as a Far Detector module in the Deep Underground Neutrino Experiment (DUNE) neutrino-oscillation experiment. For the charge-readout system, we use the charge-collection pixels and associated application-specific integrated circuits currently being developed for the liquid argon (LAr) component of the DUNE Near Detector design, ArgonCube. In addition, we divide the TPC into a number or shorter drift volumes, reducing the total voltage used to drift the ionisation electrons, and minimising the stored energy per TPC. Segmenting the TPC also contains scintillation light, allowing for precise trigger localisation and a more expansive light-readout system. Furthermore, the design opens the possibility of replacing or upgrading components. These augmentations could substantially improve reliability and sensitivity, particularly for low energy signals, in comparison to a traditional monolithic LArTPCs with projective charge-readout. △ Less

Submitted 13 November, 2019; v1 submitted 28 August, 2019; originally announced August 2019.

Comments: 12 pages, 5 figures

Quantifying the pathways to life using assembly spaces

Authors: Stuart M. Marshall, Douglas Moore, Alastair R. G. Murray, Sara I. Walker, Leroy Cronin

Abstract: We have developed the concept of pathway assembly to explore the amount of extrinsic information required to build an object. To quantify this information in an agnostic way, we present a method to determine the amount of pathway assembly information contained within such an object by deconstructing the object into its irreducible parts, and then evaluating the minimum number of steps to reconstru… ▽ More We have developed the concept of pathway assembly to explore the amount of extrinsic information required to build an object. To quantify this information in an agnostic way, we present a method to determine the amount of pathway assembly information contained within such an object by deconstructing the object into its irreducible parts, and then evaluating the minimum number of steps to reconstruct the object along any pathway. The mathematical formalisation of this approach uses an assembly space. By finding the minimal number of steps contained in the route by which the objects can be assembled within that space, we can compare how much information (I) is gained from knowing this pathway assembly index (PA) according to I_PA=log (|N|)/(|N_PA |) where, for an end product with PA=x, N is the set of objects possible that can be created from the same irreducible parts within x steps regardless of PA, and NPA is the subset of those objects with the precise pathway assembly index PA=x. Applying this formalism to objects formed in 1D, 2D and 3D space allows us to identify objects in the world or wider Universe that have high assembly numbers. We propose that objects with PA greater than a threshold are important because these are uniquely identifiable as those that must have been produced by biological or technological processes, rather than the assembly occurring via unbiased random processes alone. We think this approach is needed to help identify the new physical and chemical laws needed to understand what life is, by quantifying what life does. △ Less

Submitted 9 August, 2019; v1 submitted 6 July, 2019; originally announced July 2019.

Comments: manuscript with 10 figures and supplementary data

A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment

Authors: M. Abe, S. Bae, G. Beer, G. Bunce, H. Choi, S. Choi, M. Chung, W. da Silva, S. Eidelman, M. Finger, Y. Fukao, T. Fukuyama, S. Haciomeroglu, K. Hasegawa, K. Hayasaka, N. Hayashizaki, H. Hisamatsu, T. Iijima, H. Iinuma, K. Inami, H. Ikeda, M. Ikeno, K. Ishida, T. Itahashi, M. Iwasaki , et al. (71 additional authors not shown)

Abstract: This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon… ▽ More This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$. △ Less

Submitted 10 March, 2019; v1 submitted 10 January, 2019; originally announced January 2019.

Comments: 24 pages, 14 figures

Reducing model bias in a deep learning classifier using domain adversarial neural networks in the MINERvA experiment

Authors: G. N. Perdue, A. Ghosh, M. Wospakrik, F. Akbar, D. A. Andrade, M. Ascencio, L. Bellantoni, A. Bercellie, M. Betancourt, G. F. R. Caceres Vera, T. Cai, M. F. Carneiro, J. Chaves, D. Coplowe, H. da Motta, G. A. Díaz, J. Felix, L. Fields, R. Fine, A. M. Gago, R. Galindo, T. Golan, R. Gran, J. Y. Han, D. A. Harris , et al. (31 additional authors not shown)

Abstract: We present a simulation-based study using deep convolutional neural networks (DCNNs) to identify neutrino interaction vertices in the MINERvA passive targets region, and illustrate the application of domain adversarial neural networks (DANNs) in this context. DANNs are designed to be trained in one domain (simulated data) but tested in a second domain (physics data) and utilize unlabeled data from… ▽ More We present a simulation-based study using deep convolutional neural networks (DCNNs) to identify neutrino interaction vertices in the MINERvA passive targets region, and illustrate the application of domain adversarial neural networks (DANNs) in this context. DANNs are designed to be trained in one domain (simulated data) but tested in a second domain (physics data) and utilize unlabeled data from the second domain so that during training only features which are unable to discriminate between the domains are promoted. MINERvA is a neutrino-nucleus scattering experiment using the NuMI beamline at Fermilab. $A$-dependent cross sections are an important part of the physics program, and these measurements require vertex finding in complicated events. To illustrate the impact of the DANN we used a modified set of simulation in place of physics data during the training of the DANN and then used the label of the modified simulation during the evaluation of the DANN. We find that deep learning based methods offer significant advantages over our prior track-based reconstruction for the task of vertex finding, and that DANNs are able to improve the performance of deep networks by leveraging available unlabeled data and by mitigating network performance degradation rooted in biases in the physics models used for training. △ Less

Submitted 27 November, 2018; v1 submitted 24 August, 2018; originally announced August 2018.

Comments: 41 pages

Journal ref: Journal of Instrumentation, Volume 13, Number 11, 2018

All-optical lithography process for contacting atomically-precise devices

Authors: Daniel R. Ward, Michael T. Marshall, DeAnna M. Campbell, Tzu-Ming Lu, Justin C. Koepke, David A. Scrymgeour, Ezra Bussmann, Shashank Misra

Abstract: We describe an all-optical lithography process that can be used to make electrical contact to atomic-precision donor devices made in silicon using scanning tunneling microscopy (STM). This is accomplished by implementing a cleaning procedure in the STM that allows the integration of metal alignment marks and ion-implanted contacts at the wafer level. Low-temperature transport measurements of a pat… ▽ More We describe an all-optical lithography process that can be used to make electrical contact to atomic-precision donor devices made in silicon using scanning tunneling microscopy (STM). This is accomplished by implementing a cleaning procedure in the STM that allows the integration of metal alignment marks and ion-implanted contacts at the wafer level. Low-temperature transport measurements of a patterned device establish the viability of the process. △ Less

Submitted 8 August, 2017; originally announced August 2017.

The Single-Phase ProtoDUNE Technical Design Report

Authors: B. Abi, R. Acciarri, M. A. Acero, M. Adamowski, C. Adams, D. L. Adams, P. Adamson, M. Adinolfi, Z. Ahmad, C. H. Albright, T. Alion, J. Anderson, K. Anderson, C. Andreopoulos, M. P. Andrews, R. A. Andrews, J. dos Anjos, A. Ankowski, J. Anthony, M. Antonello, A. Aranda Fernandez, A. Ariga, T. Ariga, E. Arrieta Diaz, J. Asaadi , et al. (806 additional authors not shown)

Abstract: ProtoDUNE-SP is the single-phase DUNE Far Detector prototype that is under construction and will be operated at the CERN Neutrino Platform (NP) starting in 2018. ProtoDUNE-SP, a crucial part of the DUNE effort towards the construction of the first DUNE 10-kt fiducial mass far detector module (17 kt total LAr mass), is a significant experiment in its own right. With a total liquid argon (LAr) mass… ▽ More ProtoDUNE-SP is the single-phase DUNE Far Detector prototype that is under construction and will be operated at the CERN Neutrino Platform (NP) starting in 2018. ProtoDUNE-SP, a crucial part of the DUNE effort towards the construction of the first DUNE 10-kt fiducial mass far detector module (17 kt total LAr mass), is a significant experiment in its own right. With a total liquid argon (LAr) mass of 0.77 kt, it represents the largest monolithic single-phase LArTPC detector to be built to date. It's technical design is given in this report. △ Less

Submitted 27 July, 2017; v1 submitted 21 June, 2017; originally announced June 2017.

Comments: 165 pages, fix references, author list and minor numbers

Neutrino Flux Predictions for the NuMI Beam

Authors: MINERvA Collaboration, L. Aliaga, M. Kordosky, T. Golan, O. Altinok, L. Bellantoni, A. Bercellie, M. Betancourt, A. Bravar, H. Budd, M. F. Carneiro, G. A. Diaz, E. Endress, J. Felix, L. Fields, R. Fine, A. M. Gago, R. Galindo, H. Gallagher, R. Gran, D. A. Harris, A. Higuera, K. Hurtado, M. Kiveni, J. Kleykamp , et al. (36 additional authors not shown)

Abstract: Knowledge of the neutrino flux produced by the Neutrinos at the Main Injector (NuMI) beamline is essential to the neutrino oscillation and neutrino interaction measurements of the MINERvA, MINOS+, NOvA and MicroBooNE experiments at Fermi National Accelerator Laboratory. We have produced a flux prediction which uses all available and relevant hadron production data, incorporating measurements of pa… ▽ More Knowledge of the neutrino flux produced by the Neutrinos at the Main Injector (NuMI) beamline is essential to the neutrino oscillation and neutrino interaction measurements of the MINERvA, MINOS+, NOvA and MicroBooNE experiments at Fermi National Accelerator Laboratory. We have produced a flux prediction which uses all available and relevant hadron production data, incorporating measurements of particle production off of thin targets as well as measurements of particle yields from a spare NuMI target exposed to a 120 GeV proton beam. The result is the most precise flux prediction achieved for a neutrino beam in the one to tens of GeV energy region. We have also compared the prediction to in situ measurements of the neutrino flux and find good agreement. △ Less

Submitted 11 July, 2016; v1 submitted 3 July, 2016; originally announced July 2016.

Comments: v2 includes supplemental material consisting of the flux prediction and uncertainties in ascii and root format, a program to read the ascii datafiles, and a short guide with additional details. v3 fixes a couple of typographical errors on the units for some quantities in the beam focusing section

Report number: Fermilab PUB-16-091-ND

Journal ref: Phys. Rev. D 94, 092005 (2016)

Measurement of $K^{+}$ production in charged-current $ν_μ$ interactions

Authors: C. M. Marshall, L. Aliaga, O. Altinok, L. Bellantoni, A. Bercellie, M. Betancourt, A. Bodek, A. Bravar, H. Budd, T. Cai, M. F. Carneiro, J. Chvojka, H. da Motta, J. Devan, S. A. Dytman, G. A. Díaz, B. Eberly, E. Endress, J. Felix, L. Fields, A. Filkins, R. Fine, A. M. Gago, R. Galindo, H. Gallagher , et al. (57 additional authors not shown)

Abstract: Production of K^{+} mesons in charged-current ν_μ interactions on plastic scintillator (CH) is measured using MINERvA exposed to the low-energy NuMI beam at Fermilab. Timing information is used to isolate a sample of 885 charged-current events containing a stopping K^{+} which decays at rest. The differential cross section in K^{+} kinetic energy, dσ/dT_{K}, is observed to be relatively flat betwe… ▽ More Production of K^{+} mesons in charged-current ν_μ interactions on plastic scintillator (CH) is measured using MINERvA exposed to the low-energy NuMI beam at Fermilab. Timing information is used to isolate a sample of 885 charged-current events containing a stopping K^{+} which decays at rest. The differential cross section in K^{+} kinetic energy, dσ/dT_{K}, is observed to be relatively flat between 0 and 500 MeV. Its shape is in good agreement with the prediction by the \textsc{genie} neutrino event generator when final-state interactions are included, however the data rate is lower than the prediction by 15\%. △ Less

Submitted 25 July, 2016; v1 submitted 13 April, 2016; originally announced April 2016.

Comments: added ancillary files with cross-section, statistical uncertainty covariance matrix and systematic uncertainty covariance matrix decomposed into flux and non-flux components

Report number: FERMILAB PUB-16-109-ND

Journal ref: Phys. Rev. D 94, 012002 (2016)

Evidence for neutral-current diffractive neutral pion production from hydrogen in neutrino interactions on hydrocarbon

Authors: MINERvA Collaboration, J. Wolcott, L. Aliaga, O. Altinok, A. Bercellie, M. Betancourt, A. Bodek, A. Bravar, H. Budd, T. Cai, M. F. Carneiro, J. Chvojka, H. da Motta, J. Devan, S. A. Dytman, G. A. Díaz, B. Eberly, E. Endress, J. Felix, L. Fields, R. Fine, R. Galindo, H. Gallagher, T. Golan, R. Gran , et al. (46 additional authors not shown)

Abstract: The MINERvA experiment observes an excess of events containing electromagnetic showers relative to the expectation from Monte Carlo simulations in neutral-current neutrino interactions with mean beam energy of 4.5 GeV on a hydrocarbon target. The excess is characterized and found to be consistent with neutral-current neutral pion production with a broad energy distribution peaking at 7 GeV and a t… ▽ More The MINERvA experiment observes an excess of events containing electromagnetic showers relative to the expectation from Monte Carlo simulations in neutral-current neutrino interactions with mean beam energy of 4.5 GeV on a hydrocarbon target. The excess is characterized and found to be consistent with neutral-current neutral pion production with a broad energy distribution peaking at 7 GeV and a total cross section of 0.26 +- 0.02 (stat) +- 0.08 (sys) x 10^{-39} cm^{2}. The angular distribution, electromagnetic shower energy, and spatial distribution of the energy depositions of the excess are consistent with expectations from neutrino neutral-current diffractive neutral pion production from hydrogen in the hydrocarbon target. These data comprise the first direct experimental observation and constraint for a reaction that poses an important background process in neutrino oscillation experiments searching for muon neutrino to electron neutrino oscillations. △ Less

Submitted 28 July, 2016; v1 submitted 6 April, 2016; originally announced April 2016.

Comments: 15 pages, 7 figures; accepted by Phys. Rev. Lett

Report number: FERMILAB-PUB-16-108-ND

Journal ref: Phys. Rev. Lett. 117, 111801 (2016)

Measurement of Neutrino Flux from Neutrino-Electron Elastic Scattering

Authors: MINERvA Collaboration, J. Park, L. Aliaga, O. Altinok, L. Bellantoni, A. Bercellie, M. Betancourt, A. Bodek, A. Bravar, H. Budd, T. Cai, M. F. Carneiro, M. E. Christy, J. Chvojka, H. da Motta, S. A. Dytman, G. A. Diaz, B. Eberly, J. Felix, L. Fields, R. Fine, A. M. Gago, R. Galindo, A. Ghosh, T. Golan , et al. (44 additional authors not shown)

Abstract: Muon-neutrino elastic scattering on electrons is an observable neutrino process whose cross section is precisely known. Consequently a measurement of this process in an accelerator-based $ν_μ$ beam can improve the knowledge of the absolute neutrino flux impinging upon the detector; typically this knowledge is limited to $\sim$ 10% due to uncertainties in hadron production and focusing. We have iso… ▽ More Muon-neutrino elastic scattering on electrons is an observable neutrino process whose cross section is precisely known. Consequently a measurement of this process in an accelerator-based $ν_μ$ beam can improve the knowledge of the absolute neutrino flux impinging upon the detector; typically this knowledge is limited to $\sim$ 10% due to uncertainties in hadron production and focusing. We have isolated a sample of 135 $\pm$ 17 neutrino-electron elastic scattering candidates in the segmented scintillator detector of MINERvA, after subtracting backgrounds and correcting for efficiency. We show how this sample can be used to reduce the total uncertainty on the NuMI $ν_μ$ flux from 9% to 6%. Our measurement provides a flux constraint that is useful to other experiments using the NuMI beam, and this technique is applicable to future neutrino beams operating at multi-GeV energies. △ Less

Submitted 15 June, 2016; v1 submitted 23 December, 2015; originally announced December 2015.

Comments: 11 pages, 11 figures

Report number: FERMILAB-PUB-15-575-ND

Journal ref: Phys. Rev. D 93, 112007 (2016)

MINERvA neutrino detector response measured with test beam data

Authors: MINERvA Collaboration, L. Aliaga, O. Altinok, C. Araujo Del Castillo, L. Bagby, L. Bellantoni, W. F. Bergan, A. Bodek, R. Bradford, A. Bravar, H. Budd, A. Butkevich, D. A. Martinez Caicedo, M. F. Carneiro, M. E. Christy, J. Chvojka, H. da Motta, J. Devan, G. A. Diaz, S. A. Dytman, B. Eberly, J. Felix, L. Fields, R. Fine, R. Flight , et al. (63 additional authors not shown)

Abstract: The MINERvA collaboration operated a scaled-down replica of the solid scintillator tracking and sampling calorimeter regions of the MINERvA detector in a hadron test beam at the Fermilab Test Beam Facility. This article reports measurements with samples of protons, pions, and electrons from 0.35 to 2.0 GeV/c momentum. The calorimetric response to protons, pions, and electrons are obtained from the… ▽ More The MINERvA collaboration operated a scaled-down replica of the solid scintillator tracking and sampling calorimeter regions of the MINERvA detector in a hadron test beam at the Fermilab Test Beam Facility. This article reports measurements with samples of protons, pions, and electrons from 0.35 to 2.0 GeV/c momentum. The calorimetric response to protons, pions, and electrons are obtained from these data. A measurement of the parameter in Birks' law and an estimate of the tracking efficiency are extracted from the proton sample. Overall the data are well described by a Geant4-based Monte Carlo simulation of the detector and particle interactions with agreements better than 4%, though some features of the data are not precisely modeled. These measurements are used to tune the MINERvA detector simulation and evaluate systematic uncertainties in support of the MINERvA neutrino cross section measurement program. △ Less

Submitted 7 April, 2015; v1 submitted 26 January, 2015; originally announced January 2015.

Comments: as accepted by NIM A

Report number: FERMILAB-PUB-15-018-ND

Enhancement of muonium emission rate from silica aerogel with a laser ablated surface

Authors: G. A. Beer, Y. Fujiwara, S. Hirota, K. Ishida, M. Iwasaki, S. Kanda, H. Kawai, N. Kawamura, R. Kitamura, S. Lee, W. Lee G. M. Marshall, T. Mibe, Y. Miyake, S. Okada, K. Olchanski, A. Olin, Y. Oishi, H. Onishi, M. Otani, N. Saito, K. Shimomura, P. Strasser, M. Tabata, D. Tomono, K. Ueno , et al. (2 additional authors not shown)

Abstract: Emission of muonium ($μ^+e^-$) atoms from a laser-processed aerogel surface into vacuum was studied for the first time. Laser ablation was used to create hole-like regions with diameter of about 270$~μ$m in a triangular pattern with hole separation in the range of 300--500$~μ$m. The emission probability for the laser-processed aerogel sample is at least eight times higher than for a uniform one. Emission of muonium ($μ^+e^-$) atoms from a laser-processed aerogel surface into vacuum was studied for the first time. Laser ablation was used to create hole-like regions with diameter of about 270$~μ$m in a triangular pattern with hole separation in the range of 300--500$~μ$m. The emission probability for the laser-processed aerogel sample is at least eight times higher than for a uniform one. △ Less

Submitted 30 July, 2014; originally announced July 2014.

Journal ref: Prog. Theor. Exp. Phys. (2014) 091C01

Measurement of muonium emission from silica aerogel

Authors: P. Bakule, G. A. Beer, D. Contreras, M. Esashi, Y. Fujiwara, Y. Fukao, S. Hirota, H. Iinuma, K. Ishida, M. Iwasaki, T. Kakurai, S. Kanda, H. Kawai, N. Kawamura, G. M. Marshall, H. Masuda, Y. Matsuda, T. Mibe, Y. Miyake, S. Okada, K. Olchanski, A. Olin, H. Onishi, N. Saito, K. Shimomura , et al. (6 additional authors not shown)

Abstract: Emission of muonium ($μ^{+}e^{-}$) atoms from silica aerogel into vacuum was observed. Characteristics of muonium emission were established from silica aerogel samples with densities in the range from 29 mg cm$^{-3}$ to 178 mg cm$^{-3}$. Spectra of muonium decay times correlated with distances from the aerogel surfaces, which are sensitive to the speed distributions, follow general features expect… ▽ More Emission of muonium ($μ^{+}e^{-}$) atoms from silica aerogel into vacuum was observed. Characteristics of muonium emission were established from silica aerogel samples with densities in the range from 29 mg cm$^{-3}$ to 178 mg cm$^{-3}$. Spectra of muonium decay times correlated with distances from the aerogel surfaces, which are sensitive to the speed distributions, follow general features expected from a diffusion process, while small deviations from a simple room-temperature thermal diffusion model are identified. The parameters of the diffusion process are deduced from the observed yields. △ Less

Submitted 17 June, 2013; originally announced June 2013.

Comments: 11 pages, 5 figures, submitted to PTEP

Journal ref: Prog. Theor. Exp. Phys. (2013) 103C01

Design, Calibration, and Performance of the MINERvA Detector

Authors: L. Aliaga, L. Bagby, B. Baldin, A. Baumbaugh, A. Bodek, R. Bradford, W. K. Brooks, D. Boehnlein, S. Boyd, H. Budd, A. Butkevich, D. A. Martinez Caicedo, C. M. Castromonte, M. E. Christy, J. Chvojka, H. da Motta, D. S. Damiani, I. Danko, M. Datta, R. DeMaat, J. Devan, E. Draeger, S. A. Dytman, G. A. Diaz, B. Eberly , et al. (80 additional authors not shown)

Abstract: The MINERvA experiment is designed to perform precision studies of neutrino-nucleus scattering using $ν_μ$ and ${\barν}_μ$ neutrinos incident at 1-20 GeV in the NuMI beam at Fermilab. This article presents a detailed description of the \minerva detector and describes the {\em ex situ} and {\em in situ} techniques employed to characterize the detector and monitor its performance. The detector is co… ▽ More The MINERvA experiment is designed to perform precision studies of neutrino-nucleus scattering using $ν_μ$ and ${\barν}_μ$ neutrinos incident at 1-20 GeV in the NuMI beam at Fermilab. This article presents a detailed description of the \minerva detector and describes the {\em ex situ} and {\em in situ} techniques employed to characterize the detector and monitor its performance. The detector is comprised of a finely-segmented scintillator-based inner tracking region surrounded by electromagnetic and hadronic sampling calorimetry. The upstream portion of the detector includes planes of graphite, iron and lead interleaved between tracking planes to facilitate the study of nuclear effects in neutrino interactions. Observations concerning the detector response over sustained periods of running are reported. The detector design and methods of operation have relevance to future neutrino experiments in which segmented scintillator tracking is utilized. △ Less

Submitted 22 May, 2013; originally announced May 2013.

Report number: FERMILAB-PUB-13-111-E

Journal ref: Nucl. Inst. and Meth. A743 (2014) 130

Resolving an Individual One-Proton Spin Flip to Determine a Proton Spin State

Authors: J. DiSciacca, M. Marshall, K. Marable, G. Gabrielse

Abstract: Previous measurements with a single trapped proton or antiproton detected spin resonance from the increased scatter of frequency measurements caused by many spin flips. Here a measured correlation confirms that individual spin transitions and states are detected instead. The high fidelity suggests that it may be possible to use quantum jump spectroscopy to measure the p and \pbar magnetic moments… ▽ More Previous measurements with a single trapped proton or antiproton detected spin resonance from the increased scatter of frequency measurements caused by many spin flips. Here a measured correlation confirms that individual spin transitions and states are detected instead. The high fidelity suggests that it may be possible to use quantum jump spectroscopy to measure the p and \pbar magnetic moments much more precisely. △ Less

Submitted 8 March, 2013; v1 submitted 4 March, 2013; originally announced March 2013.

Comments: 4 pages, 7 figures

Journal ref: Phys. Rev. Lett. 110, 140406 (2013)

One-Particle Measurement of the Antiproton Magnetic Moment

Authors: ATRAP Collaboration, J. DiSciacca, M. Marshall, K. Marable, G. Gabrielse, S. Ettenauer, E. Tardiff, R. Kalra, D. W. Fitzakerley, M. C. George, E. A. Hessels, C. H. Storry, M. Weel, D. Grzonka, W. Oelert, T. Sefzick

Abstract: \DeclareRobustCommand{\pbar}{\HepAntiParticle{p}{}{}\xspace} \DeclareRobustCommand{\p}{\HepParticle{p}{}{}\xspace} \DeclareRobustCommand{\mup}{$μ_{p}${}{}\xspace} \DeclareRobustCommand{\mupbar}{$μ_{\pbar}${}{}\xspace} \DeclareRobustCommand{\muN}{$μ_N${}{}\xspace For the first time a single trapped \pbar is used to measure the \pbar magnetic moment ${\bmμ}_{\pbar}$. The moment… ▽ More \DeclareRobustCommand{\pbar}{\HepAntiParticle{p}{}{}\xspace} \DeclareRobustCommand{\p}{\HepParticle{p}{}{}\xspace} \DeclareRobustCommand{\mup}{$μ_{p}${}{}\xspace} \DeclareRobustCommand{\mupbar}{$μ_{\pbar}${}{}\xspace} \DeclareRobustCommand{\muN}{$μ_N${}{}\xspace For the first time a single trapped \pbar is used to measure the \pbar magnetic moment ${\bmμ}_{\pbar}$. The moment ${\bmμ}_{\pbar} = μ_{\pbar} {\bm S}/(\hbar/2)$ is given in terms of its spin ${\bm S}$ and the nuclear magneton (\muN) by $μ_{\pbar}/μ_N = -2.792\,845 \pm 0.000\,012$. The 4.4 parts per million (ppm) uncertainty is 680 times smaller than previously realized. Comparing to the proton moment measured using the same method and trap electrodes gives $μ_{\pbar}/μ_p = -1.000\,000 \pm 0.000\,005$ to 5 ppm, for a proton moment ${\bmμ}_{p} = μ_{p} {\bm S}/(\hbar/2)$, consistent with the prediction of the CPT theorem. △ Less

Submitted 4 February, 2013; v1 submitted 26 January, 2013; originally announced January 2013.

Comments: 4 pages, 4 figures. arXiv admin note: substantial text overlap with arXiv:1201.3038

Journal ref: Phys. Rev. Lett. 110, 130801 (2013)

The MINER$ν$A Data Acquisition System and Infrastructure

Authors: G. N. Perdue, L. Bagby, B. Baldin, C. Gingu, J. Olsen, P. Rubinov, E. C. Schulte, R. Bradford, W. K. Brooks, D. A. M. Caicedo, C. M. Castromonte, J. Chvojka, H. da Motta, I. Danko, J. Devan, B. Eberly, J. Felix, L. Fields, G. A. Fiorentini, A. M. Gago, R. Gran, D. A. Harris, K. Hurtado, H. Lee, E. Maher , et al. (18 additional authors not shown)

Abstract: MINER$ν$A (Main INjector ExpeRiment $ν$-A) is a new few-GeV neutrino cross section experiment that began taking data in the FNAL NuMI (Fermi National Accelerator Laboratory Neutrinos at the Main Injector) beam-line in March of 2010. MINER$ν$A employs a fine-grained scintillator detector capable of complete kinematic characterization of neutrino interactions. This paper describes the MINER$ν$A data… ▽ More MINER$ν$A (Main INjector ExpeRiment $ν$-A) is a new few-GeV neutrino cross section experiment that began taking data in the FNAL NuMI (Fermi National Accelerator Laboratory Neutrinos at the Main Injector) beam-line in March of 2010. MINER$ν$A employs a fine-grained scintillator detector capable of complete kinematic characterization of neutrino interactions. This paper describes the MINER$ν$A data acquisition system (DAQ) including the read-out electronics, software, and computing architecture. △ Less

Submitted 5 September, 2012; originally announced September 2012.

Comments: 34 pages, 16 figures

Study of a Large NaI(Tl) Crystal

Authors: A. Aguilar-Arevalo, M. Aoki, M. Blecher, D. A. Bryman, L. Doria, P. Gumplinger, A. Hussein, N. Ito, S. Kettell, L. Kurchaninov, L. Littenberg, C. Malbrunot, G. M. Marshall, T. Numao, R. Poutissou, A. Sher, K. Yamada

Abstract: Using a narrow band positron beam, the response of a large high-resolution NaI(Tl) crystal to an incident positron beam was measured. It was found that nuclear interactions cause the appearance of additional peaks in the low energy tail of the deposited energy spectrum. Using a narrow band positron beam, the response of a large high-resolution NaI(Tl) crystal to an incident positron beam was measured. It was found that nuclear interactions cause the appearance of additional peaks in the low energy tail of the deposited energy spectrum. △ Less

Submitted 10 March, 2010; originally announced March 2010.

High Purity Pion Beam at TRIUMF

Authors: A. Aguilar-Arevalo, M. Blecher, D. A. Bryman, J. Comfort, J. Doornbos, L. Doria, A. Hussein, N. Ito, S. Kettell, L. Kurchaninov, C. Malbrunot, G. M. Marshall, T. Numao, R. Poutissou, A. Sher, B. Walker, K. Yamada

Abstract: An extension of the TRIUMF M13 low-energy pion channel designed to suppress positrons based on an energy-loss technique is described. A source of beam channel momentum calibration from the decay pi+ --> e+ nu is also described. An extension of the TRIUMF M13 low-energy pion channel designed to suppress positrons based on an energy-loss technique is described. A source of beam channel momentum calibration from the decay pi+ --> e+ nu is also described. △ Less

Submitted 18 January, 2010; originally announced January 2010.

Comments: 5 pages

Journal ref: Nuclear Instrument and Methods in Physics Research A 609 (2009) 102

Time expansion chamber system for characterization of TWIST low energy muon beams

Authors: J. Hu, G. Sheffer, Yu. I. Davydov, D. R. Gill, P. Gumplinger, R. S. Henderson, B. Jamieson, C. Lindsay, G. M. Marshall, K. Olchanski, A. Olin, R. Openshaw, V. Selivanov

Abstract: A low mass time expansion chamber (TEC) has been developed to measure distributions of position and angle of the TRIUMF low energy surface muon beam used for the TWIST experiment. The experiment is a high precision measurement of muon decay and is dominated by systematic uncertainties, including the stability, reproducibility, and characterization of the beam. The distributions measured by two T… ▽ More A low mass time expansion chamber (TEC) has been developed to measure distributions of position and angle of the TRIUMF low energy surface muon beam used for the TWIST experiment. The experiment is a high precision measurement of muon decay and is dominated by systematic uncertainties, including the stability, reproducibility, and characterization of the beam. The distributions measured by two TEC modules are one essential ingredient of an accurate simulation of TWIST. The uncertainties, which are extracted through comparisons of data and simulation, must be known to assess potential systematic uncertainties of the TWIST results. The design criteria, construction, alignment, calibration, and operation of the TEC system are discussed, including experiences from initial beam studies. A brief description of the use of TEC data in the TWIST simulation is also included. △ Less

Submitted 11 July, 2006; v1 submitted 13 April, 2006; originally announced April 2006.

Comments: v. 2, with corrections and revised figures. 23 pages, 16 figures, accepted for publication in Nuclear Inst. and Methods in Physics Research, A

Report number: TRI-PP-06-04

Journal ref: Nucl.Instrum.Meth.A566:563-574,2006

Resonant Scattering of Muonic Hydrogen Atoms and Dynamics of Muonic Molecular Complex

Authors: TRIUMF Munoic Hydrogen Collaboration, M. C. Fujiwara, A. Adamczak, J. M. Bailey, G. A. Beer, J. L. Beveridge, M. P. Faifman, T. M. Huber, P. Kammel, S. K. Kim, P. E. Knowles, A. R. Kunselman, M. Maier, V. E. Markushin, G. M. Marshall, C. J. Martoff, G. R. Mason, F. Mulhauser, A. Olin, C. Petitjean, T. A. Porcelli, J. Wozniak, J. Zmeskal

Abstract: Resonant scattering of muonic hydrogen atoms via back decay of molecular complex, a key process in the understanding of epithermal muonic molecular formation, is analyzed. The limitations of the effective rate approximation are discussed and the importance of the explicit treatment of the back decay is stressed. An expression of the energy distribution for the back-decayed atoms is given. Resonant scattering of muonic hydrogen atoms via back decay of molecular complex, a key process in the understanding of epithermal muonic molecular formation, is analyzed. The limitations of the effective rate approximation are discussed and the importance of the explicit treatment of the back decay is stressed. An expression of the energy distribution for the back-decayed atoms is given. △ Less

Submitted 29 November, 2001; originally announced November 2001.

Comments: 5pages, contribution to RIKEN International Symposium on Muon Catalyzed Fusion, to be published in Hyperfine Interactions

Report number: TRI-PP-01-36

Measurement of the Resonant $dμt$ Molecular Formation Rate in Solid HD

Authors: T. A. Porcelli, A. Adamczak, J. M. Bailey, G. A. Beer, J. L. Douglas, M. P. Faifman, M. C. Fujiwara, T. M. Huber, P. Kammel, S. K. Kim, P. E. Knowles, A. R. Kunselman, M. Maier, V. E. Mar kushin, G. M. Marshall, G. R. Mason, F. Mulhauser, A. Olin, C. Petitjean, J. Zmeskal

Abstract: Measurements of muon-catalyzed dt fusion ($dμt \to ^4He+n+μ^-$) in solid HD have been performed. The theory describing the energy dependent resonant molecular formation rate for the reaction $μt$ + HD $\to [(dμt)pee]^*$ is compared to experimental results in a pure solid HD target. Constraints on the rates are inferred through the use of a Monte Carlo model developed specifically for the experim… ▽ More Measurements of muon-catalyzed dt fusion ($dμt \to ^4He+n+μ^-$) in solid HD have been performed. The theory describing the energy dependent resonant molecular formation rate for the reaction $μt$ + HD $\to [(dμt)pee]^*$ is compared to experimental results in a pure solid HD target. Constraints on the rates are inferred through the use of a Monte Carlo model developed specifically for the experiment. From the time-of- flight analysis of fusion events in 16 and 37 $μg\cdot cm^{-2}$ targets, an average formation rate consistent with 0.897$\pm$(0.046)$_{stat}\pm$ (0.166)$_{syst}$ times the theoretical prediction was obtained. △ Less

Submitted 2 April, 2001; originally announced April 2001.

Comments: 4 pages, 5 figures

Report number: TRI-PP-01-01

Journal ref: Phys.Rev.Lett.86:3763-3766,2001

Time-of-Flight Spectroscopy of Muonic Hydrogen Atoms and Molecules

Authors: TRIUMF Muonic Hydrogen Collaboration, M. C. Fujiwara, A. Adamczak, J. M. Bailey, G. A. Beer, J. L. Beveridge, M. P. Faifman, T. M. Huber, P. Kammel, S. K. Kim, P. E. Knowles, A. R. Kunselman, V. E. Markushin, G. M. Marshall, G. R. Mason, F. Mulhauser, A. Olin, C. Petitjean, T. A. Porcelli, J. Zmeskal

Abstract: Studies of muonic hydrogen atoms and molecules have been performed traditionally in bulk targets of gas, liquid or solid. At TRIUMF, Canada's meson facility, we have developed a new type of target system using multilayer thin films of solid hydrogen, which provides a beam of muonic hydrogen atoms in vacuum. Using the time-of-flight of the muonic atoms, the energy-dependent information of muonic… ▽ More Studies of muonic hydrogen atoms and molecules have been performed traditionally in bulk targets of gas, liquid or solid. At TRIUMF, Canada's meson facility, we have developed a new type of target system using multilayer thin films of solid hydrogen, which provides a beam of muonic hydrogen atoms in vacuum. Using the time-of-flight of the muonic atoms, the energy-dependent information of muonic reactions are obtained in direct manner. We discuss some unique measurements enabled by the new technique, with emphasis on processes relevant to muon catalyzed fusion. △ Less

Submitted 22 January, 2001; originally announced January 2001.

Comments: Contribution to Hydrogen Atom II --- Precise Physics with Simple Atomic Systems (Springer, Berlin)

Report number: TRI-PP-00-60

Using Thin Film Targets for Muonic Atoms and Muon Catalyzed Fusion Studies

Authors: TRIUMF Munoic Hydrogen Collaboration, M. C. Fujiwara, A. Adamczak, J. M. Bailey, G. A. Beer, J. L. Beveridge, M. P. Faifman, T. M. Huber, P. Kammel, S. K. Kim, P. E. Knowles, A. R. Kunselman, V. E. Markushin, G. M. Marshall, C. J. Martoff, G. R. Mason, F. Mulhauser, A. Olin, C. Petitjean, T. A. Porcelli, J. Zmeskal

Abstract: Studies of muonic atoms and muon catalyzed fusion have been conventionally done in a bulk target of gas, liquid or solid hydrogen isotopes. The use of thin film targets developed at TRIUMF have notable advantages in tackling some of the most important questions in the field, which could be further exploited at future high intensity muon sources. We review the technique of the thin film method wi… ▽ More Studies of muonic atoms and muon catalyzed fusion have been conventionally done in a bulk target of gas, liquid or solid hydrogen isotopes. The use of thin film targets developed at TRIUMF have notable advantages in tackling some of the most important questions in the field, which could be further exploited at future high intensity muon sources. We review the technique of the thin film method with emphasis on recent results and a future proposal. △ Less

Submitted 3 September, 2000; originally announced September 2000.

Comments: Talk given at KEK International Workshop on High Intensity Muon Sources, HIMUS-99

Report number: TRI-PP-00-51

Resonant Formation of $dμt$ Molecules in Deuterium: An Atomic Beam Measurement of Muon Catalyzed dt Fusion

Authors: TRIUMF Munoic Hydrogen Collaboration, M. C. Fujiwara, A. Adamczak, J. M. Bailey, G. A. Beer, J. L. Beveridge, M. P. Faifman, T. M. Huber, P. Kammel, S. K. Kim, P. E. Knowles, A. R. Kunselman, M. Maier, V. E. Markushin, G. M. Marshall, C. J. Martoff, G. R. Mason, F. Mulhauser, A. Olin, C. Petitjean, T. A. Porcelli, J. Wozniak, J. Zmeskal

Abstract: Resonant formation of $dμt$ molecules in collisions of muonic tritium ($μt$) on D$_2$ was investigated using a beam of $μt$ atoms, demonstrating a new direct approach in muon catalyzed fusion studies. Strong epithermal resonances in $dμt$ formation were directly revealed for the first time. From the time-of-flight analysis of $2036\pm 116$ $dt$ fusion events, a formation rate consistent with… ▽ More Resonant formation of $dμt$ molecules in collisions of muonic tritium ($μt$) on D$_2$ was investigated using a beam of $μt$ atoms, demonstrating a new direct approach in muon catalyzed fusion studies. Strong epithermal resonances in $dμt$ formation were directly revealed for the first time. From the time-of-flight analysis of $2036\pm 116$ $dt$ fusion events, a formation rate consistent with $0.73\pm (0.16)_{meas} \pm (0.09)_{model}$ times the theoretical prediction was obtained. For the largest peak at a resonance energy of $0.423 \pm 0.037$ eV, this corresponds to a rate of $(7.1 \pm 1.8) \times 10^9$ s$^{-1}$, more than an order of magnitude larger than those at low energies. △ Less

Submitted 6 August, 2000; originally announced August 2000.

Comments: To appear in Phys. Rev. Lett

Report number: TRI-PP-00-24

Journal ref: Phys.Rev.Lett. 85 (2000) 1642-1645