Showing 1–50 of 156 results for author: Luo, J

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Purcell enhancement and spin spectroscopy of silicon vacancy centers in silicon carbide using an ultra-small mode-volume plasmonic cavity

Authors: Jae-Pil So, Jialun Luo, Jaehong Choi, Brendan McCullian, Gregory D. Fuchs

Abstract: Silicon vacancy (V$_{Si}$) centers in 4H-silicon carbide have emerged as a strong candidate for quantum networking applications due to their robust electronic and optical properties including a long spin coherence lifetime and bright, stable emission. Here, we report the integration of V$_{Si}$ centers with a plasmonic nanocavity to Purcell enhance the emission, which is critical for scalable quan… ▽ More Silicon vacancy (V$_{Si}$) centers in 4H-silicon carbide have emerged as a strong candidate for quantum networking applications due to their robust electronic and optical properties including a long spin coherence lifetime and bright, stable emission. Here, we report the integration of V$_{Si}$ centers with a plasmonic nanocavity to Purcell enhance the emission, which is critical for scalable quantum networking. Employing a simple fabrication process, we demonstrate plasmonic cavities that support a nanoscale mode volume and exhibit an increase in the spontaneous emission rate with a measured Purcell factor of up to 48. In addition to investigating the optical resonance modes, we demonstrate that an improvement in the optical stability of the spin-preserving resonant optical transitions relative to the radiation-limited value. The results highlight the potential of nanophotonic structures for advancing quantum networking technologies and emphasizes the importance of optimizing emitter-cavity interactions for efficient quantum photonic applications. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: 27 pages in manuscript format including supplement

Giant Second Harmonic Generation from Wafer-Scale Aligned Chiral Carbon Nanotubes

Authors: Rui Xu, Jacques Doumani, Viktor Labuntsov, Nina Hong, Anna-Christina Samaha, Weiran Tu, Fuyang Tay, Elizabeth Blackert, Jiaming Luo, Mario El Tahchi, Weilu Gao, Jun Lou, Yohei Yomogida, Kazuhiro Yanagi, Riichiro Saito, Vasili Perebeinos, Andrey Baydin, Junichiro Kono, Hanyu Zhu

Abstract: Chiral carbon nanotubes (CNTs) are direct-gap semiconductors with optical properties governed by one-dimensional excitons with enormous oscillator strengths. Each species of chiral CNTs has an enantiomeric pair of left- and right-handed CNTs with nearly identical properties, but enantiomer-dependent phenomena can emerge, especially in nonlinear optical processes. Theoretical studies have predicted… ▽ More Chiral carbon nanotubes (CNTs) are direct-gap semiconductors with optical properties governed by one-dimensional excitons with enormous oscillator strengths. Each species of chiral CNTs has an enantiomeric pair of left- and right-handed CNTs with nearly identical properties, but enantiomer-dependent phenomena can emerge, especially in nonlinear optical processes. Theoretical studies have predicted strong second-order nonlinearities for chiral CNTs, but there has been no experimental verification due to the lack of macroscopically ordered assemblies of single-enantiomer chiral CNTs. Here for the first time, we report the synthesis of centimeter-scale films of densely packed and aligned single-enantiomer chiral CNTs that exhibit micro-fabrication compatibility. We observe giant second harmonic generation (SHG) emission from the chiral CNT film, which originates from the intrinsic chirality and inversion symmetry breaking of the atomic structure of chiral CNTs. The observed value of the dominant element of the second-order nonlinear optical susceptibility tensor reaches $1.5\times 10^{3}$ pm/V at a pump wavelength of 1030 nm, corresponding to the lowest-energy excitonic resonance. Our calculations based on many-body theory correctly estimate the spectrum and magnitude of such excitonically enhanced optical nonlinearity. These results are promising for developing scalable chiral-CNT electronics, nonlinear photonics and photonic quantum computing. △ Less

Submitted 5 July, 2024; originally announced July 2024.

High Spectral-Efficiency, Ultra-low MIMO SDM Transmission over a Field-Deployed Multi-Core OAM Fiber

Authors: Junyi Liu, Zengquan Xu, Shuqi Mo, Yuming Huang, Yining Huang, Zhenhua Li, Yuying Guo, Lei Shen, Shuo Xu, Ran Gao, Cheng Du, Qian Feng, Jie Luo, Jie Liu, Siyuan Yu

Abstract: Few-mode multi-core fiber (FM-MCF) based Space-Division Multiplexing (SDM) systems possess the potential to maximize the number of multiplexed spatial channels per fiber by harnessing both the space (fiber cores) and mode (optical mode per core) dimensions. However, to date, no SDM transmissions over field-deployed FM-MCFs in realistic outdoor settings have been reported, which contrasts with SDM… ▽ More Few-mode multi-core fiber (FM-MCF) based Space-Division Multiplexing (SDM) systems possess the potential to maximize the number of multiplexed spatial channels per fiber by harnessing both the space (fiber cores) and mode (optical mode per core) dimensions. However, to date, no SDM transmissions over field-deployed FM-MCFs in realistic outdoor settings have been reported, which contrasts with SDM schemes demonstrated using single-mode multi-core fibers (SM-MCFs) installed in practical fiber cable ducts. In this paper, we present the successful demonstration of bidirectional SDM transmission over a 5-km field-deployed seven ring-core fiber (7-RCF) with a cladding diameter of 178 $μ$m, achieving a Spectral Efficiency (SE) of 2$\times$201.6 bit/s/Hz. This work establishes a new record for the highest SE attained in SDM demonstrations utilizing field-deployed fiber cables, achieving an approximate 10x increase compared to the SE of reported field-deployed optical fiber cable transmission systems. Notably, these results are realized through the utilization of small-scale modular 4$\times$4 multiple-input multiple-output (MIMO) processing with a time-domain equalization (TDE) tap number not exceeding 15, maintaining a complexity per unit capacity comparable to that of MIMO equalization in SDM demonstrations employing weakly coupled SM-MCF cables. These results underscore the significant potential for achieving heightened SE and expanding capacity per individual fiber using SDM techniques in practical applications. △ Less

Submitted 29 April, 2024; originally announced July 2024.

Comments: 17 pages, 8 figures

Development and Comprehensive Evaluation of TMR Sensor-Based Magnetrodes

Authors: Jiahui Luo, Zhaojie Xu, Zhenhu Jin, Mixia Wang, Xinxia Cai, Jiamin Chen

Abstract: Due to their compact size and exceptional sensitivity at room temperature, magnetoresistance (MR) sensors have garnered considerable interest in numerous fields, particularly in the detection of weak magnetic signals in biological systems. The magnetrodes, integrating MR sensors with needle-shaped Si-based substrates, are designed to be inserted into the brain for local magnetic field detection. A… ▽ More Due to their compact size and exceptional sensitivity at room temperature, magnetoresistance (MR) sensors have garnered considerable interest in numerous fields, particularly in the detection of weak magnetic signals in biological systems. The magnetrodes, integrating MR sensors with needle-shaped Si-based substrates, are designed to be inserted into the brain for local magnetic field detection. Although recent research has predominantly focused on giant magnetoresistance (GMR) sensors, tunnel magnetoresistance (TMR) sensors exhibit significantly higher sensitivity. In this study, we introduce TMR-based magnetrodes featuring TMR sensors at both the tip and mid-section of the probe, enabling detection of local magnetic fields at varied spatial positions. To enhance detectivity, we have designed and fabricated magnetrodes with varied aspect ratios of the free layer, incorporating diverse junction shapes, quantities, and serial arrangements. Utilizing a custom-built magnetotransport and noise measurement system for characterization, our TMR-based magnetrode demonstrates a limit of detection (LOD) of 300pT/Hz1/2 at 1 kHz. This implies that neuronal spikes can be distinguished with minimal averaging, thereby facilitating the elucidation of their magnetic properties. △ Less

Submitted 14 May, 2024; originally announced June 2024.

Stabilizing Solution-Substrate Interaction of Perovskite Ink on PEDOT:PSS for Scalable Blade Coated Narrow Bandgap Perovskite Solar Modules by Gas Quenching

Authors: Severin Siegrist, Johnpaul K. Pious, Huagui Lai, Radha K. Kothandaraman, Jincheng Luo, Vitor Vlnieska, Ayodhya N. Tiwari, Fan Fu

Abstract: The development of scalable 1.25 eV mixed Pb-Sn perovskite solar modules by blade coating lags behind Pb-based perovskites due to limited understanding of solution-substrate interaction of the perovskite ink on PEDOT:PSS and subsequent gas quenching. To address this challenge, we systematically studied the wet film deposition and quenching process to better understand narrow bandgap perovskite fil… ▽ More The development of scalable 1.25 eV mixed Pb-Sn perovskite solar modules by blade coating lags behind Pb-based perovskites due to limited understanding of solution-substrate interaction of the perovskite ink on PEDOT:PSS and subsequent gas quenching. To address this challenge, we systematically studied the wet film deposition and quenching process to better understand narrow bandgap perovskite film formation on PEDOT:PSS. We found, the wetting of Pb-Sn perovskite ink on PEDOT:PSS is highly unstable over relevant coating time scales, causing the contact angles to decrease rapidly from 42° to 16° within seconds. This instability leads to localized irregularities in the wet film, resulting in uneven solvent extraction and inhomogeneous nuclei density. As a result, rough perovskite films with voids at the buried interface are obtained. To overcome this problem, we developed a quasi-static wetting process by reducing the blade coating speed, thereby stabilizing the wetting behavior of Pb-Sn perovskite precursor ink on PEDOT:PSS. This optimized process facilitates the deposition of high-quality, void-free Pb-Sn perovskite films with uniform thickness over 8 cm of coating length using moderate (1.4 bar) N2 quenching. We achieved 20 % efficient narrow bandgap perovskite solar cells and mini-modules with 15.8 % active area efficiency on 15.9 cm2. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Machine-Learning based photon counting for PMT waveforms and its application to the improvement of the energy resolution in large liquid scintillator detectors

Authors: Wei Jiang, Guihong Huang, Zhen Liu, Wuming Luo, Liangjian Wen, Jianyi Luo

Abstract: Photomultiplier tubes (PMTs) are widely used in particle experiments for photon detection. PMT waveform analysis is crucial for high-precision measurement of the position and energy of incident particles in liquid scintillator (LS) detectors. A key factor contributing to the energy resolution in large liquid scintillator detectors with PMTs is the charge smearing of PMTs. This paper presents a mac… ▽ More Photomultiplier tubes (PMTs) are widely used in particle experiments for photon detection. PMT waveform analysis is crucial for high-precision measurement of the position and energy of incident particles in liquid scintillator (LS) detectors. A key factor contributing to the energy resolution in large liquid scintillator detectors with PMTs is the charge smearing of PMTs. This paper presents a machine-learning-based photon counting method for PMT waveforms and its application to the energy reconstruction, using the JUNO experiment as an example. The results indicate that leveraging the photon counting information from the machine learning model can partially mitigate the impact of PMT charge smearing and lead to a relative 2.0% to 2.8% improvement on the energy resolution at different energies. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: 10 pages, 9 figures

ORCA: A Global Ocean Emulator for Multi-year to Decadal Predictions

Authors: Zijie Guo, Pumeng Lyu, Fenghua Ling, Jing-Jia Luo, Niklas Boers, Wanli Ouyang, Lei Bai

Abstract: Ocean dynamics plays a crucial role in driving global weather and climate patterns. Accurate and efficient modeling of ocean dynamics is essential for improved understanding of complex ocean circulation and processes, for predicting climate variations and their associated teleconnections, and for addressing the challenges of climate change. While great efforts have been made to improve numerical O… ▽ More Ocean dynamics plays a crucial role in driving global weather and climate patterns. Accurate and efficient modeling of ocean dynamics is essential for improved understanding of complex ocean circulation and processes, for predicting climate variations and their associated teleconnections, and for addressing the challenges of climate change. While great efforts have been made to improve numerical Ocean General Circulation Models (OGCMs), accurate forecasting of global oceanic variations for multi-year remains to be a long-standing challenge. Here, we introduce ORCA (Oceanic Reliable foreCAst), the first data-driven model predicting global ocean circulation from multi-year to decadal time scales. ORCA accurately simulates the three-dimensional circulations and dynamics of the global ocean with high physical consistency. Hindcasts of key oceanic variables demonstrate ORCA's remarkable prediction skills in predicting ocean variations compared with state-of-the-art numerical OGCMs and abilities in capturing occurrences of extreme events at the subsurface ocean and ENSO vertical patterns. These results demonstrate the potential of data-driven ocean models for providing cheap, efficient, and accurate global ocean modeling and prediction. Moreover, ORCA stably and faithfully emulates ocean dynamics at decadal timescales, demonstrating its potential even for climate projections. The model will be available at https://github.com/OpenEarthLab/ORCA. △ Less

Submitted 24 May, 2024; originally announced May 2024.

FuXi-ENS: A machine learning model for medium-range ensemble weather forecasting

Authors: Xiaohui Zhong, Lei Chen, Hao Li, Jun Liu, Xu Fan, Jie Feng, Kan Dai, Jing-Jia Luo, Jie Wu, Yuan Qi, Bo Lu

Abstract: Ensemble forecasting is crucial for improving weather predictions, especially for forecasts of extreme events. Constructing an ensemble prediction system (EPS) based on conventional NWP models is highly computationally expensive. ML models have emerged as valuable tools for deterministic weather forecasts, providing forecasts with significantly reduced computational requirements and even surpassin… ▽ More Ensemble forecasting is crucial for improving weather predictions, especially for forecasts of extreme events. Constructing an ensemble prediction system (EPS) based on conventional NWP models is highly computationally expensive. ML models have emerged as valuable tools for deterministic weather forecasts, providing forecasts with significantly reduced computational requirements and even surpassing the forecast performance of traditional NWP models. However, challenges arise when applying ML models to ensemble forecasting. Recent ML models, such as GenCast and SEEDS model, rely on the ERA5 EDA or operational NWP ensemble members for forecast generation. Their spatial resolution is also considered too coarse for many applications. To overcome these limitations, we introduce FuXi-ENS, an advanced ML model designed to deliver 6-hourly global ensemble weather forecasts up to 15 days. This model runs at a significantly increased spatial resolution of 0.25\textdegree, incorporating 5 atmospheric variables at 13 pressure levels, along with 13 surface variables. By leveraging the inherent probabilistic nature of Variational AutoEncoder (VAE), FuXi-ENS optimizes a loss function that combines the CRPS and the KL divergence between the predicted and target distribution, facilitating the incorporation of flow-dependent perturbations in both initial conditions and forecast. This innovative approach makes FuXi-ENS an advancement over the traditional ones that use L1 loss combined with the KL loss in standard VAE models for ensemble weather forecasting. Results demonstrate that FuXi-ENS outperforms ensemble forecasts from the ECMWF, a world leading NWP model, in the CRPS of 98.1% of 360 variable and forecast lead time combinations. This achievement underscores the potential of the FuXi-ENS model to enhance ensemble weather forecasts, offering a promising direction for further development in this field. △ Less

Submitted 5 July, 2024; v1 submitted 9 May, 2024; originally announced May 2024.

Machine Learning-Assisted Thermoelectric Cooling for On-Demand Multi-Hotspot Thermal Management

Authors: Jiajian Luo, Jaeho Lee

Abstract: Thermoelectric coolers (TECs) offer a promising solution for direct cooling of local hotspots and active thermal management in advanced electronic systems. However, TECs present significant trade-offs among spatial cooling, heating and power consumption. The optimization of TECs requires extensive simulations, which are impractical for managing actual systems with multiple hotspots under spatial a… ▽ More Thermoelectric coolers (TECs) offer a promising solution for direct cooling of local hotspots and active thermal management in advanced electronic systems. However, TECs present significant trade-offs among spatial cooling, heating and power consumption. The optimization of TECs requires extensive simulations, which are impractical for managing actual systems with multiple hotspots under spatial and temporal variations. In this study, we present a novel machine learning-assisted optimization algorithm for thermoelectric coolers that can achieve global optimal temperature by individually controlling TEC units based on real-time multi-hotspot conditions across the entire domain. We train a convolutional neural network (CNN) with a combination of the Inception module and multi-task learning (MTL) approach to comprehend the coupled thermal-electrical physics underlying the system and attain accurate predictions for both temperature and power consumption with and without TECs. Due to the intricate interaction among passive thermal gradient, Peltier effect and Joule effect, a local optimal TEC control experiences spatial temperature trade-off which may not lead to a global optimal solution. To address this issue, we develop a backtracking-based optimization algorithm using the machine learning model to iterate all possible TEC assignments for attaining global optimal solutions. For any m by n matrix with NHS hotspots (n, m <= 10, 0<= NHS <= 20), our algorithm is capable of providing 52.4% peak temperature reduction and its corresponding TEC array control within an average of 1.64 seconds while iterating through tens of temperature predictions behind-the-scenes. This represents a speed increase of over three orders of magnitude compared to traditional FEM strategies which take approximately 27 minutes. △ Less

Submitted 24 May, 2024; v1 submitted 20 April, 2024; originally announced April 2024.

Comments: This article has been submitted to Journal of Applied Physics under review

Report number: JAP-1089-7550

Journal ref: J. Appl. Phys. 135, 244503 (2024)

Xiwu: A Basis Flexible and Learnable LLM for High Energy Physics

Authors: Zhengde Zhang, Yiyu Zhang, Haodong Yao, Jianwen Luo, Rui Zhao, Bo Huang, Jiameng Zhao, Yipu Liao, Ke Li, Lina Zhao, Jun Cao, Fazhi Qi, Changzheng Yuan

Abstract: Large Language Models (LLMs) are undergoing a period of rapid updates and changes, with state-of-the-art (SOTA) model frequently being replaced. When applying LLMs to a specific scientific field, it's challenging to acquire unique domain knowledge while keeping the model itself advanced. To address this challenge, a sophisticated large language model system named as Xiwu has been developed, allowi… ▽ More Large Language Models (LLMs) are undergoing a period of rapid updates and changes, with state-of-the-art (SOTA) model frequently being replaced. When applying LLMs to a specific scientific field, it's challenging to acquire unique domain knowledge while keeping the model itself advanced. To address this challenge, a sophisticated large language model system named as Xiwu has been developed, allowing you switch between the most advanced foundation models and quickly teach the model domain knowledge. In this work, we will report on the best practices for applying LLMs in the field of high-energy physics (HEP), including: a seed fission technology is proposed and some data collection and cleaning tools are developed to quickly obtain domain AI-Ready dataset; a just-in-time learning system is implemented based on the vector store technology; an on-the-fly fine-tuning system has been developed to facilitate rapid training under a specified foundation model. The results show that Xiwu can smoothly switch between foundation models such as LLaMA, Vicuna, ChatGLM and Grok-1. The trained Xiwu model is significantly outperformed the benchmark model on the HEP knowledge question-and-answering and code generation. This strategy significantly enhances the potential for growth of our model's performance, with the hope of surpassing GPT-4 as it evolves with the development of open-source models. This work provides a customized LLM for the field of HEP, while also offering references for applying LLM to other fields, the corresponding codes are available on Github. △ Less

Submitted 8 April, 2024; originally announced April 2024.

Comments: 15 pages, 8 figures

ACM Class: I.2.7

The photoinduced hidden metallic phase of monoclinic VO2 driven by local nucleation via a self-amplification process

Authors: Feng-Wu Guo, Wen-Hao Liu, Zhi Wang, Shu-Shen Li, Lin-Wang Wang, Jun-Wei Luo

Abstract: The insulator-to-metal transition (IMT) in vanadium dioxide (VO2) has garnered extensive attention for its potential applications in ultrafast switches, neuronal network architectures, and storage technologies. However, a significant controversy persists regarding the formation of the IMT, specifically concerning whether a complete structural phase transition from monoclinic (M1) to rutile (R) pha… ▽ More The insulator-to-metal transition (IMT) in vanadium dioxide (VO2) has garnered extensive attention for its potential applications in ultrafast switches, neuronal network architectures, and storage technologies. However, a significant controversy persists regarding the formation of the IMT, specifically concerning whether a complete structural phase transition from monoclinic (M1) to rutile (R) phase is necessary. Here we employ the real-time time-dependent density functional theory (rt-TDDFT) to track the dynamic evolution of atomic and electronic structures in photoexcited VO2, revealing the emergence of a long-lived monoclinic metal phase (MM) under low electronic excitation. The emergence of the metal phase in the monoclinic structure originates from the dissociation of the local V-V dimer, driven by the self-trapped and self-amplified dynamics of photoexcited holes, rather than by a pure electron-electron correction. On the other hand, the M1-to-R phase transition does appear at higher electronic excitation. Our findings validate the existence of MM phase and provide a comprehensive picture of the IMT in photoexcited VO2. △ Less

Submitted 11 April, 2024; originally announced April 2024.

Comments: 34 pages, 18 figures

A programmable topological photonic chip

Authors: Tianxiang Dai, Anqi Ma, Jun Mao, Yutian Ao, Xinyu Jia, Yun Zheng, Chonghao Zhai, Yan Yang, Zhihua Li, Bo Tang, Jun Luo, Baile Zhang, Xiaoyong Hu, Qihuang Gong, Jianwei Wang

Abstract: Controlling topological phases of light has allowed experimental observations of abundant topological phenomena and development of robust photonic devices. The prospect of more sophisticated controls with topological photonic devices for practical implementations requires high-level programmability. Here, we demonstrate a fully programmable topological photonic chip with large-scale integration of… ▽ More Controlling topological phases of light has allowed experimental observations of abundant topological phenomena and development of robust photonic devices. The prospect of more sophisticated controls with topological photonic devices for practical implementations requires high-level programmability. Here, we demonstrate a fully programmable topological photonic chip with large-scale integration of silicon photonic nanocircuits and microresonators. Photonic artificial atoms and their interactions in our compound system can be individually addressed and controlled, therefore allowing arbitrary altering of structural parameters and geometrical configurations for the observations of dynamic topological phase transitions and diverse photonic topological insulators. By individually programming artificial atoms on the generic chip, it has allowed comprehensive statistic characterisations of topological robustness against relatively weak disorders, as well as counterintuitive topological Anderson phase transitions induced by strong disorders. Our generic topological photonic chip that can be rapidly reprogrammed to implement multifunctionalities, prototypes a flexible and versatile platform for possible applications across fundamental science and topological technologies. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Metasurface spectrometers beyond resolution-sensitivity constraints

Authors: Feng Tang, Jingjun Wu, Tom Albrow-Owen, Hanxiao Cui, Fujia Chen, Yaqi Shi, Lan Zou, Jun Chen, Xuhan Guo, Yijun Sun, Jikui Luo, Bingfeng Ju, Jing Huang, Shuangli Liu, Bo Li, Liming Yang, Eric Anthony Munro, Wanguo Zheng, Hannah J. Joyce, Hongsheng Chen, Lufeng Che, Shurong Dong, Tawfique Hasan, Xin Ye, Yihao Yang , et al. (1 additional authors not shown)

Abstract: Optical spectroscopy plays an essential role across scientific research and industry for non-contact materials analysis1-3, increasingly through in-situ or portable platforms4-6. However, when considering low-light-level applications, conventional spectrometer designs necessitate a compromise between their resolution and sensitivity7,8, especially as device and detector dimensions are scaled down.… ▽ More Optical spectroscopy plays an essential role across scientific research and industry for non-contact materials analysis1-3, increasingly through in-situ or portable platforms4-6. However, when considering low-light-level applications, conventional spectrometer designs necessitate a compromise between their resolution and sensitivity7,8, especially as device and detector dimensions are scaled down. Here, we report on a miniaturizable spectrometer platform where light throughput onto the detector is instead enhanced as the resolution is increased. This planar, CMOS-compatible platform is based around metasurface encoders designed to exhibit photonic bound states in the continuum9, where operational range can be altered or extended simply through adjusting geometric parameters. This system can enhance photon collection efficiency by up to two orders of magnitude versus conventional designs; we demonstrate this sensitivity advantage through ultra-low-intensity fluorescent and astrophotonic spectroscopy. This work represents a step forward for the practical utility of spectrometers, affording a route to integrated, chip-based devices that maintain high resolution and SNR without requiring prohibitively long integration times. △ Less

Submitted 1 March, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Optimal design of fast topological pumping

Authors: Xianggui Ding, Zongliang Du, Jiachen Luo, Hui Chen, Zhenqun Guan, Xu Guo

Abstract: Utilizing synthetic dimensions generated by spatial or temporal modulation, topological pumping enables the exploration of higher-dimensional topological phenomena through lower-dimensional physical systems. In this letter, we propose a rational design paradigm of fast topological pumping based on 1D and 2D time-modulated discrete elastic lattices for the first time. Firstly, the realization of to… ▽ More Utilizing synthetic dimensions generated by spatial or temporal modulation, topological pumping enables the exploration of higher-dimensional topological phenomena through lower-dimensional physical systems. In this letter, we propose a rational design paradigm of fast topological pumping based on 1D and 2D time-modulated discrete elastic lattices for the first time. Firstly, the realization of topological pumping is ensured by introducing quantitative indicators to drive a transition of the edge or corner state in the lattice spectrum. Meanwhile, with the help of limiting speed for adiabaticity to calculate the modulation time, a mathematical formulation of designing topological pumping with the fastest modulation speed is presented. By applying the proposed design paradigm, topological edge-bulk-edge and corner-bulk-corner energy transport are successfully achieved, with 11.2 and 4.0 times of improvement in modulation speed compared to classical pumping systems in the literature. In addition, applying to 1D and 2D space-modulated systems, the optimized modulation schemes can reduce the number of stacks to 5.3% and 26.8% of the classical systems while ensuring highly concentrated energy transport. This design paradigm is expected to be extended to the rational design of fast topological pumping in other physical fields. △ Less

Submitted 15 February, 2024; originally announced February 2024.

Journal ref: Appl. Phys. Lett. 22 April 2024; 124 (17): 173101

Diffusion Model-based Probabilistic Downscaling for 180-year East Asian Climate Reconstruction

Authors: Fenghua Ling, Zeyu Lu, Jing-Jia Luo, Lei Bai, Swadhin K. Behera, Dachao Jin, Baoxiang Pan, Huidong Jiang, Toshio Yamagata

Abstract: As our planet is entering into the "global boiling" era, understanding regional climate change becomes imperative. Effective downscaling methods that provide localized insights are crucial for this target. Traditional approaches, including computationally-demanding regional dynamical models or statistical downscaling frameworks, are often susceptible to the influence of downscaling uncertainty. He… ▽ More As our planet is entering into the "global boiling" era, understanding regional climate change becomes imperative. Effective downscaling methods that provide localized insights are crucial for this target. Traditional approaches, including computationally-demanding regional dynamical models or statistical downscaling frameworks, are often susceptible to the influence of downscaling uncertainty. Here, we address these limitations by introducing a diffusion probabilistic downscaling model (DPDM) into the meteorological field. This model can efficiently transform data from 1° to 0.1° resolution. Compared with deterministic downscaling schemes, it not only has more accurate local details, but also can generate a large number of ensemble members based on probability distribution sampling to evaluate the uncertainty of downscaling. Additionally, we apply the model to generate a 180-year dataset of monthly surface variables in East Asia, offering a more detailed perspective for understanding local scale climate change over the past centuries. △ Less

Submitted 5 April, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

FengWu-GHR: Learning the Kilometer-scale Medium-range Global Weather Forecasting

Authors: Tao Han, Song Guo, Fenghua Ling, Kang Chen, Junchao Gong, Jingjia Luo, Junxia Gu, Kan Dai, Wanli Ouyang, Lei Bai

Abstract: Kilometer-scale modeling of global atmosphere dynamics enables fine-grained weather forecasting and decreases the risk of disastrous weather and climate activity. Therefore, building a kilometer-scale global forecast model is a persistent pursuit in the meteorology domain. Active international efforts have been made in past decades to improve the spatial resolution of numerical weather models. Non… ▽ More Kilometer-scale modeling of global atmosphere dynamics enables fine-grained weather forecasting and decreases the risk of disastrous weather and climate activity. Therefore, building a kilometer-scale global forecast model is a persistent pursuit in the meteorology domain. Active international efforts have been made in past decades to improve the spatial resolution of numerical weather models. Nonetheless, developing the higher resolution numerical model remains a long-standing challenge due to the substantial consumption of computational resources. Recent advances in data-driven global weather forecasting models utilize reanalysis data for model training and have demonstrated comparable or even higher forecasting skills than numerical models. However, they are all limited by the resolution of reanalysis data and incapable of generating higher-resolution forecasts. This work presents FengWu-GHR, the first data-driven global weather forecasting model running at the 0.09$^{\circ}$ horizontal resolution. FengWu-GHR introduces a novel approach that opens the door for operating ML-based high-resolution forecasts by inheriting prior knowledge from a pretrained low-resolution model. The hindcast of weather prediction in 2022 indicates that FengWu-GHR is superior to the IFS-HRES. Furthermore, evaluations on station observations and case studies of extreme events support the competitive operational forecasting skill of FengWu-GHR at the high resolution. △ Less

Submitted 28 January, 2024; originally announced February 2024.

Comments: 19 pages

Improving Global Weather and Ocean Wave Forecast with Large Artificial Intelligence Models

Authors: Fenghua Ling, Lin Ouyang, Boufeniza Redouane Larbi, Jing-Jia Luo, Tao Han, Xiaohui Zhong, Lei Bai

Abstract: The rapid advancement of artificial intelligence technologies, particularly in recent years, has led to the emergence of several large parameter artificial intelligence weather forecast models. These models represent a significant breakthrough, overcoming the limitations of traditional numerical weather prediction models and indicating the emergence of profound potential tools for atmosphere-ocean… ▽ More The rapid advancement of artificial intelligence technologies, particularly in recent years, has led to the emergence of several large parameter artificial intelligence weather forecast models. These models represent a significant breakthrough, overcoming the limitations of traditional numerical weather prediction models and indicating the emergence of profound potential tools for atmosphere-ocean forecasts. This study explores the evolution of these advanced artificial intelligence forecast models, and based on the identified commonalities, proposes the "Three Large Rules" to measure their development. We discuss the potential of artificial intelligence in revolutionizing numerical weather prediction, and briefly outlining the underlying reasons for its great potential. While acknowledging the high accuracy, computational efficiency, and ease of deployment of large artificial intelligence forecast models, we also emphasize the irreplaceable values of traditional numerical forecasts and explore the challenges in the future development of large-scale artificial intelligence atmosphere-ocean forecast models. We believe that the optimal future of atmosphere-ocean weather forecast lies in achieving a seamless integration of artificial intelligence and traditional numerical models. Such a synthesis is anticipated to offer a more advanced and reliable approach for improved atmosphere-ocean forecasts. Additionally, we illustrate how forecasters can adapt and leverage the advanced artificial intelligence model through an example by building a large artificial intelligence model for global ocean wave forecast. △ Less

Submitted 18 April, 2024; v1 submitted 29 January, 2024; originally announced January 2024.

Roles of non-axisymmetric perturbations in free drift vertical displacement events on EAST

Authors: Haolong Li, Ping Zhu, Hang Li, Muquan Wu, Xiang Zhu, Jingting Luo

Abstract: The safe operation of most tokamaks, especially the largen sized ones, rely on the feedback control of the vertical displacement events (VDEs). However, most these feedback control systems are based on the axisymmetric VDE models. In this work, we use NIMROD simulations to study the roles of non-axisymmetric perturbations in free drift vertical displacement events on EAST. The high-$n$ modes in no… ▽ More The safe operation of most tokamaks, especially the largen sized ones, rely on the feedback control of the vertical displacement events (VDEs). However, most these feedback control systems are based on the axisymmetric VDE models. In this work, we use NIMROD simulations to study the roles of non-axisymmetric perturbations in free drift vertical displacement events on EAST. The high-$n$ modes in non-axisymmetric VDE grow first, which drive the formation of high-$n$ magnetic island chains. Subsequently, the magnetic island chains grow and overlap with each other, leading to the destruction of the magnetic flux surface, which induces a minor disruption and accelerates the start of the following major disruption. The magnetic island and the stochastic magnetic field allow the toroidally asymmetric poloidal plasma current to jet towards the hoop force direction, forming the finger and filamentary structures. Such a plasma current asymmetry strongly depends on the anisotropy in thermal transport coefficients. △ Less

Submitted 2 January, 2024; originally announced January 2024.

Towards an end-to-end artificial intelligence driven global weather forecasting system

Authors: Kun Chen, Lei Bai, Fenghua Ling, Peng Ye, Tao Chen, Jing-Jia Luo, Hao Chen, Yi Xiao, Kang Chen, Tao Han, Wanli Ouyang

Abstract: The weather forecasting system is important for science and society, and significant achievements have been made in applying artificial intelligence (AI) to medium-range weather forecasting. However, existing AI-based weather forecasting models rely on analysis or reanalysis products from traditional numerical weather prediction (NWP) systems as initial conditions for making predictions. Initial s… ▽ More The weather forecasting system is important for science and society, and significant achievements have been made in applying artificial intelligence (AI) to medium-range weather forecasting. However, existing AI-based weather forecasting models rely on analysis or reanalysis products from traditional numerical weather prediction (NWP) systems as initial conditions for making predictions. Initial states are typically generated by traditional data assimilation components, which are computational expensive and time-consuming. Here we present an AI-based data assimilation model, i.e., Adas, for global weather variables. By introducing the confidence matrix, Adas employs gated convolution to handle sparse observations and gated cross-attention for capturing the interactions between the background and observations. Further, we combine Adas with the advanced AI-based forecasting model (i.e., FengWu) to construct the first end-to-end AI-based global weather forecasting system: FengWu-Adas. We demonstrate that Adas can assimilate global observations to produce high-quality analysis, enabling the system operate stably for long term. Moreover, we are the first to apply the methods to real-world scenarios, which is more challenging and has considerable practical application potential. We have also achieved the forecasts based on the analyses generated by AI with a skillful forecast lead time exceeding that of the IFS for the first time. △ Less

Submitted 8 April, 2024; v1 submitted 18 December, 2023; originally announced December 2023.

ResoNet: Robust and Explainable ENSO Forecasts with Hybrid Convolution and Transformer Networks

Authors: Pumeng Lyu, Tao Tang, Fenghua Ling, Jing-Jia Luo, Niklas Boers, Wanli Ouyang, Lei Bai

Abstract: Recent studies have shown that deep learning (DL) models can skillfully predict the El Niño-Southern Oscillation (ENSO) forecasts over 1.5 years ahead. However, concerns regarding the reliability of predictions made by DL methods persist, including potential overfitting issues and lack of interpretability. Here, we propose ResoNet, a DL model that combines convolutional neural network (CNN) and Tr… ▽ More Recent studies have shown that deep learning (DL) models can skillfully predict the El Niño-Southern Oscillation (ENSO) forecasts over 1.5 years ahead. However, concerns regarding the reliability of predictions made by DL methods persist, including potential overfitting issues and lack of interpretability. Here, we propose ResoNet, a DL model that combines convolutional neural network (CNN) and Transformer architectures. This hybrid architecture design enables our model to adequately capture local SSTA as well as long-range inter-basin interactions across oceans. We show that ResoNet can robustly predict ESNO at lead times between 19 and 26 months, thus outperforming existing approaches in terms of the forecast horizon. According to an explainability method applied to ResoNet predictions of El Niño and La Niña events from 1- to 18-month lead, we find that it predicts the Niño3.4 index based on multiple physically reasonable mechanisms, such as the Recharge Oscillator concept, Seasonal Footprint Mechanism, and Indian Ocean capacitor effect. Moreover, we demonstrate that for the first time, the asymmetry between El Niño and La Niña development can be captured by ResoNet. Our results could help alleviate skepticism about applying DL models for ENSO prediction and encourage more attempts to discover and predict climate phenomena using AI methods. △ Less

Submitted 16 December, 2023; originally announced December 2023.

Comments: 32 pages, 5 main figures and 12 supplementary figures

A Comparative Analysis of the COVID-19 Infodemic in English and Chinese: Insights from Social Media Textual Data

Authors: Jia Luo, Daiyun Peng, Lei Shi, Didier El Baz, Xinran Liu

Abstract: The COVID-19 infodemic, characterized by the rapid spread of misinformation and unverified claims related to the pandemic, presents a significant challenge. This paper presents a comparative analysis of the COVID-19 infodemic in the English and Chinese languages, utilizing textual data extracted from social media platforms. To ensure a balanced representation, two infodemic datasets were created b… ▽ More The COVID-19 infodemic, characterized by the rapid spread of misinformation and unverified claims related to the pandemic, presents a significant challenge. This paper presents a comparative analysis of the COVID-19 infodemic in the English and Chinese languages, utilizing textual data extracted from social media platforms. To ensure a balanced representation, two infodemic datasets were created by augmenting previously collected social media textual data. Through word frequency analysis, the thirty-five most frequently occurring infodemic words are identified, shedding light on prevalent discussions surrounding the infodemic. Moreover, topic clustering analysis uncovers thematic structures and provides a deeper understanding of primary topics within each language context. Additionally, sentiment analysis enables comprehension of the emotional tone associated with COVID-19 information on social media platforms in English and Chinese. This research contributes to a better understanding of the COVID-19 infodemic phenomenon and can guide the development of strategies to combat misinformation during public health crises across different languages. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Journal ref: Frontiers in Public Health, 2023, 11

Broadband CPW-based impedance-transformed Josephson parametric amplifier

Authors: Bingcheng Qing, Long B. Nguyen, Xinyu Liu, Hengjiang Ren, William P. Livingston, Noah Goss, Ahmed Hajr, Trevor Chistolini, Zahra Pedramrazi, David I. Santiago, Jie Luo, Irfan Siddiqi

Abstract: Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amp… ▽ More Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amplifiers either have degraded noise performance or rely on complex designs. Here, we present a device based on the broadband impedance-transformed Josephson parametric amplifier (IMPA) that integrates a horn-like coplanar waveguide (CPW) transmission line, which significantly decreases the design and fabrication complexity, while keeping comparable performance. The device shows an instantaneous bandwidth of 700(200) MHz for 15(20) dB gain with an average saturation power of -110 dBm and near quantum-limited added noise. The operating frequency can be tuned over 1.4 GHz using an external flux bias. We further demonstrate the negligible back-action from our device on a transmon qubit. The amplification performance and simplicity of our device promise its wide adaptation in quantum metrology, quantum communication, and quantum information processing. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Comments: 11 pages, 8 figures

Layer-dependent exciton polarizability and the brightening of dark excitons in few-layer black phosphorus

Authors: Yuchen Lei, Junwei Ma, Jiaming Luo, Shenyang Huang, Boyang Yu, Chaoyu Song, Qiaoxia Xing, Fanjie Wang, Yuangang Xie, Jiasheng Zhang, Lei Mu, Yixuan Ma, Chong Wang, Hugen Yan

Abstract: The evolution of excitons from 2D to 3D is of great importance in photo-physics, yet the layer-dependent exciton polarizability has not been investigated in 2D semiconductors. Here, we determine the exciton polarizabilities for 3- to 11-layer black phosphorus-a direct bandgap semiconductor regardless of the thickness-through frequency-resolved photocurrent measurements on dual-gate devices and unv… ▽ More The evolution of excitons from 2D to 3D is of great importance in photo-physics, yet the layer-dependent exciton polarizability has not been investigated in 2D semiconductors. Here, we determine the exciton polarizabilities for 3- to 11-layer black phosphorus-a direct bandgap semiconductor regardless of the thickness-through frequency-resolved photocurrent measurements on dual-gate devices and unveil the carrier screening effect in relatively thicker samples. By taking advantage of the broadband photocurrent spectra, we are also able to reveal the exciton response for higher-index subbands under the gate electrical field. Surprisingly, dark excitons are brightened with intensity even stronger than the allowed transitions above certain electrical field. Our study not only sheds light on the exciton evolution with sample thickness, but also paves a way for optoelectronic applications of few-layer BP in modulators, tunable photodetectors, emitters and lasers. △ Less

Submitted 19 September, 2023; originally announced September 2023.

Comments: 30 pages, 4 figures

More considerations about the symmetry of the stress tensor of fluids

Authors: Ji Luo

Abstract: Regarding a recent dispute about the symmetry of the stress tensor of fluids, more considerations are presented. The usual proofs of this symmetry are reviewed, and contradictions between this symmetry and the mechanism of gas viscosity are analyzed for simple gas flows. It is emphasized that these proofs may not be valid because they depend on the theorem of angular momentum which preassumes that… ▽ More Regarding a recent dispute about the symmetry of the stress tensor of fluids, more considerations are presented. The usual proofs of this symmetry are reviewed, and contradictions between this symmetry and the mechanism of gas viscosity are analyzed for simple gas flows. It is emphasized that these proofs may not be valid because they depend on the theorem of angular momentum which preassumes that the internal forces between any two fluid particles are always along the line connecting them. From Newton's laws of motion, however, one can only obtain the theorem of angular momentum with an additional term. It is proved that this additional term represents the total moment of internal forces in a fluid, both by using continuum model and by considering the microscopic structure of the fluid. In the latter case, this term has the form of the total moment of the forces exerted on the nuclei by the electrons. This moment of internal forces may lead to nonsymmetry of the stress tensor and is in general nonzero as long as shear stress exists. A nonsymmetrical stress tensor suggested in the literature is discussed in terms of its effect in eliminating the contradictions and simplifying the Navier-Stokes equation. The derivation of this stress tensor for ideal gases based on the kinetic theory of gas molecules is presented, and its form in a general orthogonal curvilinear coordinate system is given. Finally, a possible experimental verification of this nonsymmetrical stress tensor is discussed. △ Less

Submitted 18 March, 2024; v1 submitted 23 August, 2023; originally announced August 2023.

The interface states in gate-all-around transistors (GAAFETs)

Authors: Yue-Yang Liu, Haoran Lu, Zirui Wang, Hui-Xiong Deng, Lang Zeng, Zhongming Wei, Jun-Wei Luo, Runsheng Wang

Abstract: The atomic-level structural detail and the quantum effects are becoming crucial to device performance as the emerging advanced transistors, representatively GAAFETs, are scaling down towards sub-3nm nodes. However, a multiscale simulation framework based on atomistic models and ab initio quantum simulation is still absent. Here, we propose such a simulation framework by fulfilling three challengin… ▽ More The atomic-level structural detail and the quantum effects are becoming crucial to device performance as the emerging advanced transistors, representatively GAAFETs, are scaling down towards sub-3nm nodes. However, a multiscale simulation framework based on atomistic models and ab initio quantum simulation is still absent. Here, we propose such a simulation framework by fulfilling three challenging tasks, i.e., building atomistic all-around interfaces between semiconductor and amorphous gate-oxide, conducting large-scale first-principles calculations on the interface models containing up to 2796 atoms, and finally bridging the state-of-the-art atomic level calculation to commercial TCAD. With this framework, two unnoticed origins of interface states are demonstrated, and their tunability by changing channel size, orientation and geometry is confirmed. The quantitative study of interface states and their effects on device performance explains why the nanosheet channel is preferred in industry. We believe such a bottom-up framework is necessary and promising for the accurate simulation of emerging advanced transistors. △ Less

Submitted 15 August, 2023; originally announced August 2023.

Single channel based interference-free and self-powered human-machine interactive interface using eigenfrequency-dominant mechanism

Authors: Sen Ding, Dazhe Zhao, Yongyao Chen, Ziyi Dai, Qian Zhao, Yibo Gao, Junwen Zhong, Jianyi Luo, Bingpu Zhou

Abstract: The recent development of wearable devices is revolutionizing the way of human-machine interaction (HMI). Nowadays, an interactive interface that carries more embedded information is desired to fulfil the increasing demand in era of Internet of Things. However, present approach normally relies on sensor arrays for memory expansion, which inevitably brings the concern of wiring complexity, signal d… ▽ More The recent development of wearable devices is revolutionizing the way of human-machine interaction (HMI). Nowadays, an interactive interface that carries more embedded information is desired to fulfil the increasing demand in era of Internet of Things. However, present approach normally relies on sensor arrays for memory expansion, which inevitably brings the concern of wiring complexity, signal differentiation, power consumption, and miniaturization. Herein, a one-channel based self-powered HMI interface, which uses the eigenfrequency of magnetized micropillar (MMP) as identification mechanism, is reported. When manually vibrated, the inherent recovery of the MMP caused a damped oscillation that generates current signals because of Faraday's Law of induction. The time-to-frequency conversion explores the MMP-related eigenfrequency, which provides a specific solution to allocate diverse commands in an interference-free behavior even with one electric channel. A cylindrical cantilever model was built to regulate the MMP eigenfrequencies via precisely designing the dimensional parameters and material properties. We show that using one device and two electrodes, high-capacity HMI interface can be realized when the MMPs with different eigenfrequencies have been integrated. This study provides the reference value to design the future HMI system especially for situations that require a more intuitive and intelligent communication experience with high-memory demand. △ Less

Submitted 15 August, 2023; originally announced August 2023.

Comments: 35 pages, 6 figures

Exploring the Potential of Integrated Optical Sensing and Communication (IOSAC) Systems with Si Waveguides for Future Networks

Authors: Xiangpeng Ou, Ying Qiu, Ming Luo, Fujun Sun, Peng Zhang, Gang Yang, Junjie Li, Jianfeng Gao, Xiaobin He, Anyan Du, Bo Tang, Bin Li, Zichen Liu, Zhihua Li, Ling Xie, Xi Xiao, Jun Luo, Wenwu Wang, Jin Tao, Yan Yang

Abstract: Advanced silicon photonic technologies enable integrated optical sensing and communication (IOSAC) in real time for the emerging application requirements of simultaneous sensing and communication for next-generation networks. Here, we propose and demonstrate the IOSAC system on the silicon nitride (SiN) photonics platform. The IOSAC devices based on microring resonators are capable of monitoring t… ▽ More Advanced silicon photonic technologies enable integrated optical sensing and communication (IOSAC) in real time for the emerging application requirements of simultaneous sensing and communication for next-generation networks. Here, we propose and demonstrate the IOSAC system on the silicon nitride (SiN) photonics platform. The IOSAC devices based on microring resonators are capable of monitoring the variation of analytes, transmitting the information to the terminal along with the modulated optical signal in real-time, and replacing bulk optics in high-precision and high-speed applications. By directly integrating SiN ring resonators with optical communication networks, simultaneous sensing and optical communication are demonstrated by an optical signal transmission experimental system using especially filtering amplified spontaneous emission spectra. The refractive index (RI) sensing ring with a sensitivity of 172 nm/RIU, a figure of merit (FOM) of 1220, and a detection limit (DL) of 8.2*10-6 RIU is demonstrated. Simultaneously, the 1.25 Gbps optical on-off-keying (OOK) signal is transmitted at the concentration of different NaCl solutions, which indicates the bit-error-ratio (BER) decreases with the increase in concentration. The novel IOSAC technology shows the potential to realize high-performance simultaneous biosensing and communication in real time and further accelerate the development of IoT and 6G networks. △ Less

Submitted 27 June, 2023; originally announced July 2023.

Comments: 11pages, 5 figutres

Using mathematics to study how people influence each other's opinions

Authors: Grace J. Li, Jiajie Luo, Kaiyan Peng, Mason A. Porter

Abstract: People sometimes change their opinions when they discuss things with other people. Researchers study mathematical models of opinions to explore how people influence each other through their social interactions. In today's digital world, these models can help us learn how to promote accurate information and reduce unwanted influence. In this article, we discuss a simple mathematical model that look… ▽ More People sometimes change their opinions when they discuss things with other people. Researchers study mathematical models of opinions to explore how people influence each other through their social interactions. In today's digital world, these models can help us learn how to promote accurate information and reduce unwanted influence. In this article, we discuss a simple mathematical model that looks at opinion changes from social interactions. We briefly describe what opinion models can tell us and how researchers try to make them more realistic. △ Less

Submitted 22 June, 2024; v1 submitted 4 July, 2023; originally announced July 2023.

Comments: This article is written for teenagers and preteens. A newly revised version, based on referee comments

Integrated Simulation Platform for Quantifying the Traffic-Induced Environmental and Health Impacts

Authors: Xuanpeng Zhao, Guoyuan Wu, Akula Venkatram, Ji Luo, Peng Hao, Kanok Boriboonsomsin, Shaohua Hu

Abstract: Air quality and human exposure to mobile source pollutants have become major concerns in urban transportation. Existing studies mainly focus on mitigating traffic congestion and reducing carbon footprints, with limited understanding of traffic-related health impacts from the environmental justice perspective. To address this gap, we present an innovative integrated simulation platform that models… ▽ More Air quality and human exposure to mobile source pollutants have become major concerns in urban transportation. Existing studies mainly focus on mitigating traffic congestion and reducing carbon footprints, with limited understanding of traffic-related health impacts from the environmental justice perspective. To address this gap, we present an innovative integrated simulation platform that models traffic-related air quality and human exposure at the microscopic level. The platform consists of five modules: SUMO for traffic modeling, MOVES for emissions modeling, a 3D grid-based dispersion model, a Matlab-based concentration visualizer, and a human exposure model. Our case study on multi-modal mobility on-demand services demonstrates that a distributed pickup strategy can reduce human cancer risk associated with PM2.5 by 33.4% compared to centralized pickup. Our platform offers quantitative results of traffic-related air quality and health impacts, useful for evaluating environmental issues and improving transportation systems management and operations strategies. △ Less

Submitted 13 June, 2023; originally announced June 2023.

Comments: 35 pages, 11 figures

Molecular geometric deep learning

Authors: Cong Shen, Jiawei Luo, Kelin Xia

Abstract: Geometric deep learning (GDL) has demonstrated huge power and enormous potential in molecular data analysis. However, a great challenge still remains for highly efficient molecular representations. Currently, covalent-bond-based molecular graphs are the de facto standard for representing molecular topology at the atomic level. Here we demonstrate, for the first time, that molecular graphs construc… ▽ More Geometric deep learning (GDL) has demonstrated huge power and enormous potential in molecular data analysis. However, a great challenge still remains for highly efficient molecular representations. Currently, covalent-bond-based molecular graphs are the de facto standard for representing molecular topology at the atomic level. Here we demonstrate, for the first time, that molecular graphs constructed only from non-covalent bonds can achieve similar or even better results than covalent-bond-based models in molecular property prediction. This demonstrates the great potential of novel molecular representations beyond the de facto standard of covalent-bond-based molecular graphs. Based on the finding, we propose molecular geometric deep learning (Mol-GDL). The essential idea is to incorporate a more general molecular representation into GDL models. In our Mol-GDL, molecular topology is modeled as a series of molecular graphs, each focusing on a different scale of atomic interactions. In this way, both covalent interactions and non-covalent interactions are incorporated into the molecular representation on an equal footing. We systematically test Mol-GDL on fourteen commonly-used benchmark datasets. The results show that our Mol-GDL can achieve a better performance than state-of-the-art (SOTA) methods. Source code and data are available at https://github.com/CS-BIO/Mol-GDL. △ Less

Submitted 22 June, 2023; originally announced June 2023.

Localized Refractive index sensing by integrated photonic crystal waveguide with edge-cavity

Authors: Ma Luo, Kaichan Zhong, Jieli Luo

Abstract: We have theoretically proposed a highly compact refractive-index sensor consisted of edge-cavity and line-defect waveguide in two-dimensional photonic crystal. The sensing object is completely outside of the single enclosed surface of the sensor. The edge-cavity is designed by engineering the spatial distribution of the cutoff frequency of edge modes. The coupling between the edge-cavity and the w… ▽ More We have theoretically proposed a highly compact refractive-index sensor consisted of edge-cavity and line-defect waveguide in two-dimensional photonic crystal. The sensing object is completely outside of the single enclosed surface of the sensor. The edge-cavity is designed by engineering the spatial distribution of the cutoff frequency of edge modes. The coupling between the edge-cavity and the waveguide is maximized by optimizing the radius of the rods between them, so that the transmittance spectrum through the waveguide has a sharp anti-peak. As the refractive index of the sensing object changes, the resonant wavelength of the edge-cavity is changed, which in turn changes the wavelength of the anti-peak. The sensitivity of the sensor is up to 40 nm/RIU, and the footprint of the sensor is only 40 $μm^{2}$. Because the transmittance spectrum is determined by the overlap between the sensing object and the highly localized resonant mode, the sensor can also perceive spatial distribution of refractive index in the sensing object. △ Less

Submitted 20 September, 2023; v1 submitted 17 June, 2023; originally announced June 2023.

Comments: 5 figures

An integrated system built for small-molecule semiconductors via high-throughput approaches

Authors: Jianchang Wu, Jiyun Zhang, Manman Hu, Patrick Reiser, Luca Torresi, Pascal Friederich, Leopold Lahn, Olga Kasian, Dirk M. Guldi, M. Eugenia Pérez-Ojeda, Anastasia Barabash, Juan S. Rocha-Ortiz, Yicheng Zhao, Zhiqiang Xie, Junsheng Luo, Yunuo Wang, Sang Il Seok, Jens A. Hauch, Christoph J. Brabec

Abstract: High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of molecular structure leads to the complexity of molecular properties, such as solubility, polarit… ▽ More High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of molecular structure leads to the complexity of molecular properties, such as solubility, polarity, and crystallinity, which poses great challenges to solution processing and purification. Here, we first report an integrated system for the high-throughput synthesis, purification, and characterization of molecules with a large variety. Based on the principle of Like dissolves like, we combine theoretical calculations and a robotic platform to accelerate the purification of those molecules. With this platform, a material library containing 125 molecules and their optical-electric properties was built within a timeframe of weeks. More importantly, the high repeatability of recrystallization we design is a reliable approach to further upgrading and industrial production. △ Less

Submitted 13 May, 2023; originally announced May 2023.

Comments: 18 pages, 5 figures

Journal ref: J. Am. Chem. Soc. 2023, 145, 30, 1651-16525

Air cold atmospheric plasma with patterns for anaplastic squamous cell carcinoma treatment

Authors: Fan Bai, Yingjie Lu, Yujie Zhi, Yueye Huang, Long Li, Jiaoxiao Luo, Jamoliddin Razzokov, Olga Koval, Maksudbek Yusupov, Guojun Chen, Zhitong Chen

Abstract: In recent years, cold atmospheric plasma (CAP) using inert gas has been successfully applied for biomedicine, such as sterilization, wound healing, skin diseases, and tumor treatment. Here, we reported air cold atmospheric plasma with three different patterns (I. Non: basic square grid structure; II. Square: basic square grid structure + square node; III. Circle: basic square grid structure + circ… ▽ More In recent years, cold atmospheric plasma (CAP) using inert gas has been successfully applied for biomedicine, such as sterilization, wound healing, skin diseases, and tumor treatment. Here, we reported air cold atmospheric plasma with three different patterns (I. Non: basic square grid structure; II. Square: basic square grid structure + square node; III. Circle: basic square grid structure + circle node) for anaplastic squamous cell carcinoma treatment (VX2 cell line). Various plasma diagnostic techniques were applied to evaluate the physics of air CAP with patterns such as discharge voltage, plasma initial generating process, plasma temperature, and optical emission spectroscopy (OES). The direct effects of air CAP with patterns on anaplastic squamous cell carcinoma treatment (VX2 cell line) were investigated in vitro. We also studied the ROS (reactive oxygen species) and RNS (reactive nitrogen species) generation in cultured media released from VX2 cells after the treatment of air CAP with patterns. The results showed that the air CAP with circle-pattern generated more active substances during at 60s treatment time, which resulted in a higher death rate of VX2 cells. These initial observations establish the air CAP with patterns as potential clinical applications for cancer therapy. △ Less

Submitted 18 April, 2023; originally announced April 2023.

FengWu: Pushing the Skillful Global Medium-range Weather Forecast beyond 10 Days Lead

Authors: Kang Chen, Tao Han, Junchao Gong, Lei Bai, Fenghua Ling, Jing-Jia Luo, Xi Chen, Leiming Ma, Tianning Zhang, Rui Su, Yuanzheng Ci, Bin Li, Xiaokang Yang, Wanli Ouyang

Abstract: We present FengWu, an advanced data-driven global medium-range weather forecast system based on Artificial Intelligence (AI). Different from existing data-driven weather forecast methods, FengWu solves the medium-range forecast problem from a multi-modal and multi-task perspective. Specifically, a deep learning architecture equipped with model-specific encoder-decoders and cross-modal fusion Trans… ▽ More We present FengWu, an advanced data-driven global medium-range weather forecast system based on Artificial Intelligence (AI). Different from existing data-driven weather forecast methods, FengWu solves the medium-range forecast problem from a multi-modal and multi-task perspective. Specifically, a deep learning architecture equipped with model-specific encoder-decoders and cross-modal fusion Transformer is elaborately designed, which is learned under the supervision of an uncertainty loss to balance the optimization of different predictors in a region-adaptive manner. Besides this, a replay buffer mechanism is introduced to improve medium-range forecast performance. With 39-year data training based on the ERA5 reanalysis, FengWu is able to accurately reproduce the atmospheric dynamics and predict the future land and atmosphere states at 37 vertical levels on a 0.25° latitude-longitude resolution. Hindcasts of 6-hourly weather in 2018 based on ERA5 demonstrate that FengWu performs better than GraphCast in predicting 80\% of the 880 reported predictands, e.g., reducing the root mean square error (RMSE) of 10-day lead global z500 prediction from 733 to 651 $m^{2}/s^2$. In addition, the inference cost of each iteration is merely 600ms on NVIDIA Tesla A100 hardware. The results suggest that FengWu can significantly improve the forecast skill and extend the skillful global medium-range weather forecast out to 10.75 days lead (with ACC of z500 > 0.6) for the first time. △ Less

Submitted 6 April, 2023; originally announced April 2023.

Comments: 12 pages

STCF Conceptual Design Report: Volume 1 -- Physics & Detector

Authors: M. Achasov, X. C. Ai, R. Aliberti, L. P. An, Q. An, X. Z. Bai, Y. Bai, O. Bakina, A. Barnyakov, V. Blinov, V. Bobrovnikov, D. Bodrov, A. Bogomyagkov, A. Bondar, I. Boyko, Z. H. Bu, F. M. Cai, H. Cai, J. J. Cao, Q. H. Cao, Z. Cao, Q. Chang, K. T. Chao, D. Y. Chen, H. Chen , et al. (413 additional authors not shown)

Abstract: The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,… ▽ More The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies. △ Less

Submitted 5 October, 2023; v1 submitted 28 March, 2023; originally announced March 2023.

Journal ref: Front. Phys. 19(1), 14701 (2024)

Bounded-Confidence Models of Opinion Dynamics with Adaptive Confidence Bounds

Authors: Grace J. Li, Jiajie Luo, Mason A. Porter

Abstract: People's opinions change with time as they interact with each other. In a bounded-confidence model (BCM) of opinion dynamics, individuals (which are represented by the nodes of a network) have continuous-valued opinions and are influenced by neighboring nodes whose opinions are sufficiently similar to theirs (i.e., are within a confidence bound). In this paper, we formulate and analyze discrete-ti… ▽ More People's opinions change with time as they interact with each other. In a bounded-confidence model (BCM) of opinion dynamics, individuals (which are represented by the nodes of a network) have continuous-valued opinions and are influenced by neighboring nodes whose opinions are sufficiently similar to theirs (i.e., are within a confidence bound). In this paper, we formulate and analyze discrete-time BCMs with heterogeneous and adaptive confidence bounds. We introduce two new models: (1) a BCM with synchronous opinion updates that generalizes the Hegselmann--Krause (HK) model and (2) a BCM with asynchronous opinion updates that generalizes the Deffuant--Weisbuch (DW) model. We analytically and numerically explore our adaptive BCMs' limiting behaviors, including the confidence-bound dynamics, the formation of clusters of nodes with similar opinions, and the time evolution of an "effective graph", which is a time-dependent subgraph of a network with edges between nodes that {are currently receptive to each other.} For a variety of networks and a wide range of values of the parameters that control the increase and decrease of confidence bounds, we demonstrate numerically that our adaptive BCMs result in fewer major opinion clusters and longer convergence times than the baseline (i.e., nonadaptive) BCMs. We also show that our adaptive BCMs can have adjacent nodes that converge to the same opinion but are not {receptive to each other.} This qualitative behavior does not occur in the associated baseline BCMs. △ Less

Submitted 3 May, 2024; v1 submitted 13 March, 2023; originally announced March 2023.

Comments: revised version; 45 pages

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Ultra-soft Thermal Diodes Enabled by Dual-Alkane-Based Phase Change Composites

Authors: Yunsong Pang, Junhong Li, Zhibin Wen, Ting Liang, Shan Gao, Dezhao Huang, Rong Sun Jianbin Xu Tengfei Luo, Xiaoliang Zeng

Abstract: Thermal diode, a type of device that allows heat to flow in one direction preferentially, can be employed in many thermal applications. However, if the mechanical compliance of the thermal diode is poor, which prevents its intimate contact with heat source or sink surfaces, the thermal rectification performance cannot be used to its full extent. In this work, we introduce a heterojunction thermal… ▽ More Thermal diode, a type of device that allows heat to flow in one direction preferentially, can be employed in many thermal applications. However, if the mechanical compliance of the thermal diode is poor, which prevents its intimate contact with heat source or sink surfaces, the thermal rectification performance cannot be used to its full extent. In this work, we introduce a heterojunction thermal diode made of a phase change material (PCM) consisting of dual alkanes (hexadecane and paraffine wax) and polyurethane. The fabricated thermal diode exhibits an ultra soft mechanical feature, with a low elastic modulus of 0.4 KPa and larger than 300% elongation until failure: the best values reported to date for thermal diodes. The measured thermal rectification factor is as high as 1.42 that in line with the theoretical model prediction. Molecular dynamic simulations reveal that the thermal rectification mechanism of the PCM based thermal diode originates from the crystal-amorphous phase transition of the hexadecane terminal as the temperature bias flips. Therefore, the heat flow in the forward direction is greater than the flux in the reverse direction. A series of experiments and finite element analyses are employed to verify the feasibility of thermal diodes for applications. Our results demonstrate that the fabricated thermal diode can be potentially used in building envelop to help with temperature regulation and thus reduce energy consumption for space cooling or heating. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Journal ref: Materials Today Physics (2024): 101450

Equitable Data-Driven Facility Location and Resource Allocation to Fight the Opioid Epidemic

Authors: Joyce Luo, Bartolomeo Stellato

Abstract: The opioid epidemic is a crisis that has plagued the United States (US) for decades. One central issue is inequitable access to treatment for opioid use disorder (OUD), which puts certain populations at a higher risk of opioid overdose. We integrate a predictive dynamical model and a prescriptive optimization problem to compute high-quality opioid treatment facility and treatment budget allocation… ▽ More The opioid epidemic is a crisis that has plagued the United States (US) for decades. One central issue is inequitable access to treatment for opioid use disorder (OUD), which puts certain populations at a higher risk of opioid overdose. We integrate a predictive dynamical model and a prescriptive optimization problem to compute high-quality opioid treatment facility and treatment budget allocations for each US state. Our predictive model is a differential equation-based epidemiological model that captures opioid epidemic dynamics. We use a process inspired by neural ODEs to fit this model to opioid epidemic data for each state and obtain estimates for unknown parameters in the model. We then incorporate this epidemiological model into a mixed-integer optimization problem (MIP) that aims to minimize opioid overdose deaths and the number of people with OUD. We develop strong relaxations based on McCormick envelopes to efficiently compute approximate solutions to our MIPs with a mean optimality gap of 3.99%. Our method provides socioeconomically equitable solutions, as it incentivizes investments in areas with higher social vulnerability (from the US Centers for Disease Control's Social Vulnerability Index) and opioid prescribing rates. On average, our approach decreases the number of people with OUD by 9.03 $\pm$ 1.772%, increases the number of people in treatment by 88.75 $\pm$ 26.223%, and decreases opioid-related deaths by 0.58 $\pm$ 0.111% after 2 years compared to baseline epidemiological model predictions. Our solutions show that policy-makers should target adding treatment facilities to counties that have fewer facilities than their population share and are more socially vulnerable. We demonstrate that our optimization approach should help inform these decisions, as it yields population health benefits in comparison to benchmarks based solely on population and social vulnerability. △ Less

Submitted 12 March, 2024; v1 submitted 15 January, 2023; originally announced January 2023.

Efficient Design of Helical Higher-Order Topological Insulators in 3D Elastic Medium

Authors: Jiachen Luo, Zongliang Du, Hui Chen, Xianggui Ding, Chang Liu, Weisheng Zhang, Xu Guo

Abstract: Topological materials (TMs) are well-known for their topological protected properties. Phononic system has the advantage of direct observation and engineering of topological phenomena on the macroscopic scale. For the inverse design of 3D TMs in continuum medium, however, it would be extremely difficult to classify the topological properties, tackle the computational complexity, and search solutio… ▽ More Topological materials (TMs) are well-known for their topological protected properties. Phononic system has the advantage of direct observation and engineering of topological phenomena on the macroscopic scale. For the inverse design of 3D TMs in continuum medium, however, it would be extremely difficult to classify the topological properties, tackle the computational complexity, and search solutions in an infinite parameter space. This work proposed a systematic design framework for the 3D mechanical higher-order topological insulators (HOTIs) by combining the symmetry indicators (SI) method and the moving morphable components (MMC) method. The 3D unit cells are described by the MMC method with only tens of design variables. By evaluating the inherent singularity properties in the 3D mechanical system, the classic formulas of topological invariants are modified accordingly for elastic waves. Then a mathematical formulation is proposed for designing the helical multipole topological insulators (MTIs) featured corner states and helical energy fluxes, by constraining the corresponding topological invariants and maximizing the width of band gap. Mechanical helical HOTIs with different symmetries are obtained by this method and verified by full wave simulations. This design paradigm can be further extended to design 3D TMs among different symmetry classes and space groups, and different physical systems. △ Less

Submitted 9 January, 2023; originally announced January 2023.

Enhanced piezoelectric response of AlN via alloying of transitional metals, and influence of type and distribution of transition metals

Authors: Xian-Hu Zha, Xiufang Ma, Jing-Ting Luo, Chen Fu

Abstract: Aluminum nitride (AlN) is an important piezoelectric material for a wide range of applications, many efforts are devoted to improving its piezoelectric response by alloying with transition metals (TMs). In this paper, the influence of the type and distribution of TM on the piezoelectric response is discussed for the first time. TM0.0625Al0.9375N with twenty-eight different TMs are investigated, an… ▽ More Aluminum nitride (AlN) is an important piezoelectric material for a wide range of applications, many efforts are devoted to improving its piezoelectric response by alloying with transition metals (TMs). In this paper, the influence of the type and distribution of TM on the piezoelectric response is discussed for the first time. TM0.0625Al0.9375N with twenty-eight different TMs are investigated, and most show higher values of piezoelectric strain modulus d33 than that of AlN. This is because the TM introduces weaker TM-N bonds and locates closer to the centre of three neighbouring N atoms. The location of TM is determined to be significantly correlated with its group number. Alloys of TMxAl1-xN (TM=Sc, Cr, Sr, Mo, Ru and Rh) with varying x are further studied. On basis of the cost of the TMs and piezoelectric performances, the alloy with Mo is more effective in enhancing d33. A high d33 of 12.3 times that of pure AlN is realized in a metastable configuration of Mo0.167Al0.833N. The distribution of Mo plays a key role in the piezoelectric performance. A higher d33 is more likely to appear in MoxAl1-xN with more Al sublayers containing Mo atoms and with fewer dimers of Mo atoms along the z-axis. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Two-dimensional natural hyperbolic materials: From polaritons modulation to applications

Authors: Guangyi Jia, Jinxuan Luo, Huaiwen Wang, Qiaoyun Ma, Qinggang Liu, Haitao Dai, Reza Asgari

Abstract: Natural hyperbolic materials (HMs) in two dimensions (2D) have an extraordinarily high anisotropy and a hyperbolic dispersion relation. Some of them can even sustain hyperbolic polaritons with great directional propagation and light compression to deeply sub-wavelength scales due to their inherent anisotropy. Herein, the anisotropic optical features of 2D natural HMs are reviewed. Four hyperbolic… ▽ More Natural hyperbolic materials (HMs) in two dimensions (2D) have an extraordinarily high anisotropy and a hyperbolic dispersion relation. Some of them can even sustain hyperbolic polaritons with great directional propagation and light compression to deeply sub-wavelength scales due to their inherent anisotropy. Herein, the anisotropic optical features of 2D natural HMs are reviewed. Four hyperbolic polaritons (i.e., phonon polaritons, plasmon polaritons, exciton-polaritons, and shear polaritons) as well as their generation mechanism are discussed in detail. The natural merits of 2D HMs hold promise for practical quantum photonic applications such as valley quantum interference, mid-infrared polarizer, spontaneous emission enhancement, near-field thermal radiation, and a new generation of optoelectronic components, among others. These analyses' conclusion outlines existing issues and potential interesting directions for 2D natural HMs. These findings could spur more interest in anisotropic 2D atomic crystals in the future, as well as the quick generation of natural HMs for new applications. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: 23 pages, 16 figures, to appear in Nanoscale (2022)

Journal ref: Nanoscale, 14, 17096-17118 (2022)

High-Performance Flexible All-Perovskite Tandem Solar Cells with Reduced VOC-Deficit in Wide-Bandgap Subcell

Authors: Huagui Lai, Jincheng Luo, Yannick Zwirner, Selina Olthof, Alexander Wieczorek, Fangyuan Ye, Quentin Jeangros, Xinxing Yin, Fatima Akhundova, Tianshu Ma, Rui He, Radha K. Kothandaraman, Xinyu Chin, Evgeniia Gilshtein, André Müller, Changlei Wang, Jarla Thiesbrummel, Sebastian Siol, José Márquez Prieto, Thomas Unold, Martin Stolterfoht, Cong Chen, Ayodhya N. Tiwari, Dewei Zhao, Fan Fu

Abstract: Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and lightweight substrates with a very high power-to-weight ratio. However, the efficiency of flexible all-perovskite tandems is lagging far behind their rigid counterp… ▽ More Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and lightweight substrates with a very high power-to-weight ratio. However, the efficiency of flexible all-perovskite tandems is lagging far behind their rigid counterparts primarily due to the challenges in developing efficient wide-bandgap (WBG) perovskite solar cells on the flexible substrates as well as the low open-circuit voltage (VOC) in the WBG perovskite subcell. Here, we report that the use of self-assembled monolayers as hole-selective contact effectively suppresses the interfacial recombination and allows the subsequent uniform growth of a 1.77 eV WBG perovskite with superior optoelectronic quality. In addition, we employ a post-deposition treatment with 2-thiopheneethylammonium chloride to further suppress the bulk and interfacial recombination, boosting the VOC of the WBG top cell to 1.29 V. Based on this, we present the first proof-of-concept four-terminal all-perovskite flexible TSC with a PCE of 22.6%. When integrating into two-terminal flexible tandems, we achieved 23.8% flexible all-perovskite TSCs with a superior VOC of 2.1 V, which is on par with the VOC reported on the 28% all-perovskite tandems grown on the rigid substrate. △ Less

Submitted 25 July, 2022; originally announced July 2022.

Study on SiPM performance at low temperatures between $-60^{\circ}$C and $-20^{\circ}$C

Authors: C. Zhong, F. J. Luo, B. Zheng, X. D. Wang, M. Y. Bu, J. Zou, M. N. Deng

Abstract: Radon is the main background source of dark matter and neutrino experiments. Radon concentration ($\rm mBq/m^3$) measurement by liquid scintillation detector is a highly sensitive method at low temperatures using silicon photomultipliers (SiPMs) arrays. The SiPM performance characteristics are closely related to the lower detection limit of the detector. In this study, we built an automatic and ac… ▽ More Radon is the main background source of dark matter and neutrino experiments. Radon concentration ($\rm mBq/m^3$) measurement by liquid scintillation detector is a highly sensitive method at low temperatures using silicon photomultipliers (SiPMs) arrays. The SiPM performance characteristics are closely related to the lower detection limit of the detector. In this study, we built an automatic and accurate low-temperature measurement system to study the single photoelectron spectrum, SPE resolution, optical crosstalk, and after-pulse of the SiPM at different temperatures. As a result, we obtained the variation trend of the SiPM parameters at different temperatures, and the SiPM optimal working conditions were obtained, which can improve the detector's sensitivity △ Less

Submitted 26 October, 2022; v1 submitted 13 July, 2022; originally announced July 2022.

Persistent Homology for Resource Coverage: A Case Study of Access to Polling Sites

Authors: Abigail Hickok, Benjamin Jarman, Michael Johnson, Jiajie Luo, Mason A. Porter

Abstract: It is important to choose the geographical distributions of public resources in a fair and equitable manner. However, it is complicated to quantify the equity of such a distribution; important factors include distances to resource sites, availability of transportation, and ease of travel. We use persistent homology, which is a tool from topological data analysis, to study the effective availabilit… ▽ More It is important to choose the geographical distributions of public resources in a fair and equitable manner. However, it is complicated to quantify the equity of such a distribution; important factors include distances to resource sites, availability of transportation, and ease of travel. We use persistent homology, which is a tool from topological data analysis, to study the effective availability and coverage of polling sites. The information from persistent homology allows us to infer holes in the distribution of polling sites. We analyze and compare the coverage of polling sites in Los Angeles County and five cities (Atlanta, Chicago, Jacksonville, New York City, and Salt Lake City), and we conclude that computation of persistent homology appears to be a reasonable approach to analyzing resource coverage. △ Less

Submitted 11 August, 2023; v1 submitted 9 June, 2022; originally announced June 2022.

Comments: revised version

MSC Class: 55N31; 91D20; 91B18

Hessian filter-assisted full diameter at half maximum (FDHM) segmentation and quantification method for optical-resolution photoacoustic microscopy

Authors: Dong Zhang, Ran Li, Xin Lou, Jianwen Luo

Abstract: Optical-resolution photoacoustic microscopy has been validated as a high-resolution and high-sensitivity imaging modality for angiographic studies in the past decades. Quantitative vascular analysis reveals critical information of physiological changes, where vessel segmentation is the key step. In this work, we developed a Hessian filter-assisted, adaptive thresholding vessel segmentation algorit… ▽ More Optical-resolution photoacoustic microscopy has been validated as a high-resolution and high-sensitivity imaging modality for angiographic studies in the past decades. Quantitative vascular analysis reveals critical information of physiological changes, where vessel segmentation is the key step. In this work, we developed a Hessian filter-assisted, adaptive thresholding vessel segmentation algorithm. Its performance is validated by a digital phantom and in vivo images. Its capability of capturing subtle vessel changes is further tested in two longitudinal studies on vascular responses to blood pressure agents. The results are compared with the widely used Hessian filter method. In the antihypotensive case, the proposed method detected a twice larger vasoconstriction than the Hessian filter method. In the antihypertensive case, the proposed method detected a vasodilation of 18.8 %, while the Hessian filter method failed in change detection. The proposed algorithm could correct errors caused by conventional segmentation methods and improve quantitative accuracy for angiographic applications. △ Less

Submitted 1 June, 2022; v1 submitted 25 May, 2022; originally announced May 2022.

Deep Learning Improves Dataset Recovery for High Frame Rate Synthetic Transmit Aperture Imaging

Authors: Jingke Zhang, Jianwen Luo

Abstract: Synthetic transmit aperture (STA) imaging can achieve optimal lateral resolution in the full field of view, at the cost of low frame rate (FR) and low signal-to-noise ratio (SNR). In our previous studies, compressed sensing based synthetic transmit aperture (CS-STA) and minimal l2-norm least squares (LS-STA) methods were proposed to recover the complete STA dataset from fewer Hadamard-encoded plan… ▽ More Synthetic transmit aperture (STA) imaging can achieve optimal lateral resolution in the full field of view, at the cost of low frame rate (FR) and low signal-to-noise ratio (SNR). In our previous studies, compressed sensing based synthetic transmit aperture (CS-STA) and minimal l2-norm least squares (LS-STA) methods were proposed to recover the complete STA dataset from fewer Hadamard-encoded plane wave (PW) transmissions. Results demonstrated that, compared with STA imaging, CS/LS-STA can maintain the high resolution of STA and improve the contrast in the deep region with increased FR. However, these methods would introduce errors to the recovered STA datasets and subsequently produce severe artifacts to the beamformed images. Recently, we discovered that the theoretical explanation for the error introduced in the LS-STA-based recovery is that LS-STA method neglects the null space component of the real STA data. To deal with this problem, we propose to train a convolutional neural network (CNN) under the null space learning framework (to estimate the missing null space component) for high-accuracy recovery of the STA dataset from fewer Hadamard-encoded PW transmissions. The mapping between the low-quality STA dataset (recovered using the LS-STA method) and the corresponding high-quality STA dataset (obtained using full Hadamard-encoded STA imaging, HE-STA) was learned from phantom and in vivo samples. The performance of the proposed CNN-STA method was compared with the LS-STA, STA, and HE-STA methods, in terms of visual quality, NRMSE, gCNR, and FWHM. The results demonstrate that the proposed method can improve the recovery accuracy of the STA datasets and therefore effectively suppress the artifacts presented in the images obtained using the LS-STA method. In addition, the proposed method can maintain the high lateral resolution of STA with fewer PW transmissions, as LS-STA does. △ Less

Submitted 15 May, 2022; originally announced May 2022.

Design and testing of LGAD sensor with shallow carbon implantation

Authors: Kewei Wu, Xuewei Jia, Tao Yang, Mengzhao Li, Wei Wang, Mei Zhao, Zhijun Liang, Joao Guimaraes da Costa, Yunyun Fan, Han Cui, Alissa Howard, Gregor Kramberger, Xin Shi, Yuekun Heng, Yuhang Tan, Bo Liu, Yuan Feng, Shuqi Li, Mengran Li, Chengjun Yu, Xuan Yang, Mingjie Zhai, Gaobo Xu, Gangping Yan, Qionghua Zhai , et al. (4 additional authors not shown)

Abstract: The low gain avalanche detectors (LGADs) are thin sensors with fast charge collection which in combination with internal gain deliver an outstanding time resolution of about 30 ps. High collision rates and consequent large particle rates crossing the detectors at the upgraded Large Hadron Collider (LHC) in 2028 will lead to radiation damage and deteriorated performance of the LGADs. The main conse… ▽ More The low gain avalanche detectors (LGADs) are thin sensors with fast charge collection which in combination with internal gain deliver an outstanding time resolution of about 30 ps. High collision rates and consequent large particle rates crossing the detectors at the upgraded Large Hadron Collider (LHC) in 2028 will lead to radiation damage and deteriorated performance of the LGADs. The main consequence of radiation damage is loss of gain layer doping (acceptor removal) which requires an increase of bias voltage to compensate for the loss of charge collection efficiency and consequently time resolution. The Institute of High Energy Physics (IHEP), Chinese Academy of Sciences (CAS) has developed a process based on the Institute of Microelectronics (IME), CAS capability to enrich the gain layer with carbon to reduce the acceptor removal effect by radiation. After 1 MeV neutron equivalent fluence of 2.5$\times$10$^{15}$ n$_{eq}$/cm$^{2}$, which is the maximum fluence to which sensors will be exposed at ATLAS High Granularity Timing Detector (HGTD), the IHEP-IME second version (IHEP-IMEv2) 50 $μ$m LGAD sensors already deliver adequate charge collection > 4 fC and time resolution < 50 ps at voltages < 400 V. The operation voltages of these 50 $μ$m devices are well below those at which single event burnout may occur. △ Less

Submitted 31 May, 2022; v1 submitted 10 May, 2022; originally announced May 2022.