Showing 1–50 of 135 results for author: Liu, N

Compact Ion Beam System for Fusion Demonstration

Authors: Allan Xi Chen, Nai-Wei Liu, Alexander Gunn, Zhe Su, Benjamin F. Sigal, Matthew Salazar, Nawar Abdalla, James Chen, Alfred Y. Wong, Qiong Wang

Abstract: We demonstrate a compact ion beam device capable of accelerating H$^+$ and D$^+$ ions up to 75keV energy, on to a solid target, with sufficient beam current to study fusion reactions. The ion beam system uses a microwave driven plasma source to generate ions that are accelerated to high energy with a DC acceleration structure. The plasma source is driven by pulsed microwaves from a solid-state RF… ▽ More We demonstrate a compact ion beam device capable of accelerating H$^+$ and D$^+$ ions up to 75keV energy, on to a solid target, with sufficient beam current to study fusion reactions. The ion beam system uses a microwave driven plasma source to generate ions that are accelerated to high energy with a DC acceleration structure. The plasma source is driven by pulsed microwaves from a solid-state RF amplifier, which is impedance matched to the plasma source chamber at the ISM band frequency (2.4-2.5GHz). The plasma chamber is held at high positive DC potential and is isolated from the impedance matching structure (at ground potential) by a dielectric-filled gap. To facilitate the use of high-energy-particle detectors near the target, the plasma chamber is biased to a high positive voltage, while the target remains grounded. A target loaded with deuterium is used to study D-D fusion and a B$_4$C or LaB$_6$ target is used to study p-$^{11}$B fusion. Detectors include solid-state charged particle detector and a scintillation fast neutron detector. The complete ion beam system can fit on a laboratory table and is a useful tool for teaching undergraduate and graduate students about the physics of fusion. △ Less

Submitted 16 July, 2024; v1 submitted 4 July, 2024; originally announced July 2024.

Comments: 18 pages, 13 figures

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Ptychographic non-line-of-sight imaging for depth-resolved visualization of hidden objects

Authors: Pengming Song, Qianhao Zhao, Ruihai Wang, Ninghe Liu, Yingqi Qiang, Tianbo Wang, Xincheng Zhang, Yi Zhang, Liangcai Cao, Guoan Zheng

Abstract: Non-line-of-sight (NLOS) imaging enables the visualization of objects hidden from direct view, with applications in surveillance, remote sensing, and light detection and ranging. Here, we introduce a NLOS imaging technique termed ptychographic NLOS (pNLOS), which leverages coded ptychography for depth-resolved imaging of obscured objects. Our approach involves scanning a laser spot on a wall to il… ▽ More Non-line-of-sight (NLOS) imaging enables the visualization of objects hidden from direct view, with applications in surveillance, remote sensing, and light detection and ranging. Here, we introduce a NLOS imaging technique termed ptychographic NLOS (pNLOS), which leverages coded ptychography for depth-resolved imaging of obscured objects. Our approach involves scanning a laser spot on a wall to illuminate the hidden objects in an obscured region. The reflected wavefields from these objects then travel back to the wall, get modulated by the wall's complex-valued profile, and the resulting diffraction patterns are captured by a camera. By modulating the object wavefields, the wall surface serves the role of the coded layer as in coded ptychography. As we scan the laser spot to different positions, the reflected object wavefields on the wall translate accordingly, with the shifts varying for objects at different depths. This translational diversity enables the acquisition of a set of modulated diffraction patterns referred to as a ptychogram. By processing the ptychogram, we recover both the objects at different depths and the modulation profile of the wall surface. Experimental results demonstrate high-resolution, high-fidelity imaging of hidden objects, showcasing the potential of pNLOS for depth-aware vision beyond the direct line of sight. △ Less

Submitted 17 May, 2024; originally announced May 2024.

An eco-friendly passivation strategy of resveratrol for highly efficient and antioxidative perovskite solar cells

Authors: Xianhu Wu, Jieyu Bi, Guanglei Cui, Nian Liu, Gaojie Xia, Ping Li, Chunyi Zhao, Zewen Zuo, Min Gu

Abstract: The stability of perovskite solar cells is closely related to the defects in perovskite crystals, and there are a large number of crystal defects in the perovskite thin films prepared by the solution method, which is not conducive to the commercial production of PSCs. In this study, resveratrol(RES), a green natural antioxidant abundant in knotweed and grape leaves, was introduced into perovskite… ▽ More The stability of perovskite solar cells is closely related to the defects in perovskite crystals, and there are a large number of crystal defects in the perovskite thin films prepared by the solution method, which is not conducive to the commercial production of PSCs. In this study, resveratrol(RES), a green natural antioxidant abundant in knotweed and grape leaves, was introduced into perovskite films to passivate the defect. RES achieves defect passivation by interacting with uncoordinated Pb2+ in perovskite films. The results show that the quality of the perovskite film is significantly improved, and the energy level structure of the device is optimized, and the power conversion efficiency of the device is increased from 21.62% to 23.44%. In addition, RES can hinder the degradation of perovskite structures by O2- and CO2- free radicals, and the device retained 88% of its initial PCE after over 1000 hours in pure oxygen environment. The device retains 91% of the initial PCE after more than 1000 hours at 25°C and 50+5% relative humidity. This work provides a strategy for the use of natural and environmentally friendly additives to improve the efficiency and stability of devices, and provides an idea for the development of efficient, stable and environmentally friendly PSCs. △ Less

Submitted 2 May, 2024; originally announced May 2024.

Hyperelasticity of Blood Clots: Bridging the Gap between Microscopic and Continuum Scales

Authors: Nicholas Filla, Beikang Gu, Jixin Hou, Kenan Song, He Li, Ning Liu, Xianqiao Wang

Abstract: The biomechanical properties of blood clots, which are dictated by their compositions and micro-structures, play a critical role in determining their fates, occlusion, persistency, or embolization in the human circulatory system. While numerous constitutive models have emerged to describe the biomechanics of blood clots, the majority of these models have primarily focused on the macroscopic deform… ▽ More The biomechanical properties of blood clots, which are dictated by their compositions and micro-structures, play a critical role in determining their fates, occlusion, persistency, or embolization in the human circulatory system. While numerous constitutive models have emerged to describe the biomechanics of blood clots, the majority of these models have primarily focused on the macroscopic deformation of the clots and the resultant strain-stress correlations without depicting the microscopic contributions from their structural components, such as fibrin fibers, fibrin network and red blood cells. This work addresses the gap in current scientific understanding by quantifying how changes in the microstructure of blood clots affect its mechanical responses under different external stresses. We leverage our previous published work to develop a hyperelastic potential model for blood clots, which incorporates six distinct strain-energy components to describe the alignment of fibers, the entropic and enthalpic stretching of fibrin fibers, the buckling of these fibers, clot densification, and clot jamming.These strain-energy components are represented by a combination of simple harmonic oscillators, one-sided harmonic potentials, and a Gaussian potential. The proposed model, which is C0, C1, and C2 continuous with a total of 13 parameters, has been validated against three data sets: fibrin clot in tension, blood clot in compression, and blood clots in shear, demonstrating its robustness. Subsequent simulations of a microscopic blood clot model are performed to uncover mechanistic correlations for a majority of the hyperelastic potential's stiffness/strain parameters. Our results show that only one proposed term concerning fiber buckling needs further refinement, while the remaining five strain-energy terms appear to describe precisely what they were intended to. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 13 figures

A Physics-driven GraphSAGE Method for Physical Process Simulations Described by Partial Differential Equations

Authors: Hang Hu, Sidi Wu, Guoxiong Cai, Na Liu

Abstract: Physics-informed neural networks (PINNs) have successfully addressed various computational physics problems based on partial differential equations (PDEs). However, while tackling issues related to irregularities like singularities and oscillations, trained solutions usually suffer low accuracy. In addition, most current works only offer the trained solution for predetermined input parameters. If… ▽ More Physics-informed neural networks (PINNs) have successfully addressed various computational physics problems based on partial differential equations (PDEs). However, while tackling issues related to irregularities like singularities and oscillations, trained solutions usually suffer low accuracy. In addition, most current works only offer the trained solution for predetermined input parameters. If any change occurs in input parameters, transfer learning or retraining is required, and traditional numerical techniques also need an independent simulation. In this work, a physics-driven GraphSAGE approach (PD-GraphSAGE) based on the Galerkin method and piecewise polynomial nodal basis functions is presented to solve computational problems governed by irregular PDEs and to develop parametric PDE surrogate models. This approach employs graph representations of physical domains, thereby reducing the demands for evaluated points due to local refinement. A distance-related edge feature and a feature mapping strategy are devised to help training and convergence for singularity and oscillation situations, respectively. The merits of the proposed method are demonstrated through a couple of cases. Moreover, the robust PDE surrogate model for heat conduction problems parameterized by the Gaussian random field source is successfully established, which not only provides the solution accurately but is several times faster than the finite element method in our experiments. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 18 pages,11 figures, 3 tables

ACM Class: G.1.8

Intrinsic Orbital Angular Momentum Originated from Optical Catastrophe Superposition

Authors: Nana Liu, Huanpeng Liang, Liu Tan, Kaijian Chen, Xiaofang Lu, Shaozhou Jiang, Bingsuo Zou, Peilong Hong, Jingjun Xu, Yi Liang

Abstract: Conventionally, intrinsic orbital angular momentum (OAM) is associated with phase vortices. However, our investigation into the propagation dynamics of 2D superimposed catastrophe beams, termed cyclone catastrophe beams (CCBs), reveals that these beams inherently exhibit rotation and possess OAM, distinct from the typical connection to phase vortices. Our observations clearly show these beams rota… ▽ More Conventionally, intrinsic orbital angular momentum (OAM) is associated with phase vortices. However, our investigation into the propagation dynamics of 2D superimposed catastrophe beams, termed cyclone catastrophe beams (CCBs), reveals that these beams inherently exhibit rotation and possess OAM, distinct from the typical connection to phase vortices. Our observations clearly show these beams rotating during autofocusing propagation and particle manipulation, confirming the presence of OAM. Theoretical calculations affirm that the OAM of these beams is intrinsic and can be adjusted by varying the number of superimposed beams. Furthermore, our interference and phase studies indicate that, although CCBs exhibit phase vortices, they do not rotate around the singularities of phase vortices and their total topological charges are zero. This implies that the manifestation of OAM within CCBs does not rely on nonzero topological charge of the presented phase vortices within CCBs. Especially, eigenstates decomposition analysis illustrates that CCBs can be decomposed as a composite of Laguerre-Gaussian (LG) modes with uneven fidelity, where the topological charges of LG modes align with multiples of the superimposed catastrophe beams but do not equal to the value of the OAM per photon within CCBs, emphasizing the intrinsic OAM within CCBs and the absence of a connection to phase vortices. Our findings not only advance the understanding of the relationship between OAM and phase vortices but also pave the way for different applications of OAM waves, catalyzing their development in optics and other domains. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Comments: 8pages, 5 figures

Balanced Quantum Hall Resistor

Authors: Kajetan M. Fijalkowski, Nan Liu, Martin Klement, Steffen Schreyeck, Karl Brunner, Charles Gould, Laurens W. Molenkamp

Abstract: The quantum anomalous Hall effect in magnetic topological insulators has been recognized as a promising platform for applications in quantum metrology. The primary reason for this is the electronic conductance quantization at zero external magnetic field, which allows to combine it with the quantum standard of voltage. Here we demonstrate a measurement scheme that increases the robustness of the z… ▽ More The quantum anomalous Hall effect in magnetic topological insulators has been recognized as a promising platform for applications in quantum metrology. The primary reason for this is the electronic conductance quantization at zero external magnetic field, which allows to combine it with the quantum standard of voltage. Here we demonstrate a measurement scheme that increases the robustness of the zero magnetic field quantum anomalous Hall resistor, allowing for higher operational currents. This is achieved by simultaneous current injection into the two disconnected perimeters of a multi-terminal Corbino device to balance the electrochemical potential between the edges, screening the electric field that drives back-scattering through the bulk, and thus improving the stability of the quantization at increased currents. This approach is not only applicable to devices based on the quantum anomalous Hall effect, but more generally can also be applied to existing quantum resistance standards that rely on the integer quantum Hall effect. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Journal ref: Nature Electronics (2024)

Assessing Large Language Models in Mechanical Engineering Education: A Study on Mechanics-Focused Conceptual Understanding

Authors: Jie Tian, Jixin Hou, Zihao Wu, Peng Shu, Zhengliang Liu, Yujie Xiang, Beikang Gu, Nicholas Filla, Yiwei Li, Ning Liu, Xianyan Chen, Keke Tang, Tianming Liu, Xianqiao Wang

Abstract: This study is a pioneering endeavor to investigate the capabilities of Large Language Models (LLMs) in addressing conceptual questions within the domain of mechanical engineering with a focus on mechanics. Our examination involves a manually crafted exam encompassing 126 multiple-choice questions, spanning various aspects of mechanics courses, including Fluid Mechanics, Mechanical Vibration, Engin… ▽ More This study is a pioneering endeavor to investigate the capabilities of Large Language Models (LLMs) in addressing conceptual questions within the domain of mechanical engineering with a focus on mechanics. Our examination involves a manually crafted exam encompassing 126 multiple-choice questions, spanning various aspects of mechanics courses, including Fluid Mechanics, Mechanical Vibration, Engineering Statics and Dynamics, Mechanics of Materials, Theory of Elasticity, and Continuum Mechanics. Three LLMs, including ChatGPT (GPT-3.5), ChatGPT (GPT-4), and Claude (Claude-2.1), were subjected to evaluation against engineering faculties and students with or without mechanical engineering background. The findings reveal GPT-4's superior performance over the other two LLMs and human cohorts in answering questions across various mechanics topics, except for Continuum Mechanics. This signals the potential future improvements for GPT models in handling symbolic calculations and tensor analyses. The performances of LLMs were all significantly improved with explanations prompted prior to direct responses, underscoring the crucial role of prompt engineering. Interestingly, GPT-3.5 demonstrates improved performance with prompts covering a broader domain, while GPT-4 excels with prompts focusing on specific subjects. Finally, GPT-4 exhibits notable advancements in mitigating input bias, as evidenced by guessing preferences for humans. This study unveils the substantial potential of LLMs as highly knowledgeable assistants in both mechanical pedagogy and scientific research. △ Less

Submitted 13 January, 2024; originally announced January 2024.

Comments: 30 pages, 7 figures, and 1 table

Spatio-Temporal Nonlinear Theory in Birefringent Microrings

Authors: Zelin Tan, Xingqiao Chen, Ning Liu, Jipeng Xu, Jianfa Zhang, Zhihong Zhu, Ken Liu, Shiqiao Qin

Abstract: Frequency-dependent nonlinear process in microresonators is widely acknowledged, but there is no theory available to calculate the conversion efficiency for each resonance of the ring, except for the phase-matching one. Similarly for azimuth-dependent nonlinear process in birefringent rings, there is a lack of theory to analysis the conversion efficiency for each azimuth of the ring. Consequently,… ▽ More Frequency-dependent nonlinear process in microresonators is widely acknowledged, but there is no theory available to calculate the conversion efficiency for each resonance of the ring, except for the phase-matching one. Similarly for azimuth-dependent nonlinear process in birefringent rings, there is a lack of theory to analysis the conversion efficiency for each azimuth of the ring. Consequently, it leads to old-fashioned or ill-considered coupling position and inefficient energy conversion in birefringent microrings. Here, we introduce spatio-temporal coupled-mode equation to describe mode spatial properties in the cavity, compensating for the deficiency of temporal coupled-mode equation in describing sophisticated responses. By this equation, we find that over a wide frequency range, the extremely strong second-harmonic generation can be achieved at different azimuth under different pumps in an X-cut lithium niobate microring, which is important for realizing an efficient entangled quantum light source, for example. This work will provide new ideas and guidelines for design and applications of monolithic birefringent photonic integrated circuits with high efficiency. △ Less

Submitted 19 December, 2023; v1 submitted 29 November, 2023; originally announced November 2023.

Sparsity-regularized coded ptychography for robust and efficient lensless microscopy on a chip

Authors: Ninghe Liu, Qianhao Zhao, Guoan Zheng

Abstract: In ptychographic imaging, the trade-off between the number of acquisitions and the resultant imaging quality presents a complex optimization problem. Increasing the number of acquisitions typically yields reconstructions with higher spatial resolution and finer details. Conversely, a reduction in measurement frequency often compromises the quality of the reconstructed images, manifesting as increa… ▽ More In ptychographic imaging, the trade-off between the number of acquisitions and the resultant imaging quality presents a complex optimization problem. Increasing the number of acquisitions typically yields reconstructions with higher spatial resolution and finer details. Conversely, a reduction in measurement frequency often compromises the quality of the reconstructed images, manifesting as increased noise and coarser details. To address this challenge, we employ sparsity priors to reformulate the ptychographic reconstruction task as a total variation regularized optimization problem. We introduce a new computational framework, termed the ptychographic proximal total-variation (PPTV) solver, designed to integrate into existing ptychography settings without necessitating hardware modifications. Through comprehensive numerical simulations, we validate that PPTV-driven coded ptychography is capable of producing highly accurate reconstructions with a minimal set of eight intensity measurements. Convergence analysis further substantiates the robustness, stability, and computational feasibility of the proposed PPTV algorithm. Experimental results obtained from optical setups unequivocally demonstrate that the PPTV algorithm facilitates high-throughput, high-resolution imaging while significantly reducing the measurement burden. These findings indicate that the PPTV algorithm has the potential to substantially mitigate the resource-intensive requirements traditionally associated with high-quality ptychographic imaging, thereby offering a pathway toward the development of more compact and efficient ptychographic microscopy systems. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Comments: 15 pages, 7 figures

RadOnc-GPT: A Large Language Model for Radiation Oncology

Authors: Zhengliang Liu, Peilong Wang, Yiwei Li, Jason Holmes, Peng Shu, Lian Zhang, Chenbin Liu, Ninghao Liu, Dajiang Zhu, Xiang Li, Quanzheng Li, Samir H. Patel, Terence T. Sio, Tianming Liu, Wei Liu

Abstract: This paper presents RadOnc-GPT, a large language model specialized for radiation oncology through advanced tuning methods. RadOnc-GPT was finetuned on a large dataset of radiation oncology patient records from the Mayo Clinic in Arizona. The model employs instruction tuning on three key tasks - generating radiotherapy treatment regimens, determining optimal radiation modalities, and providing diag… ▽ More This paper presents RadOnc-GPT, a large language model specialized for radiation oncology through advanced tuning methods. RadOnc-GPT was finetuned on a large dataset of radiation oncology patient records from the Mayo Clinic in Arizona. The model employs instruction tuning on three key tasks - generating radiotherapy treatment regimens, determining optimal radiation modalities, and providing diagnostic descriptions/ICD codes based on patient diagnostic details. Evaluations conducted by comparing RadOnc-GPT outputs to general large language model outputs showed higher ROUGE scores in these three tasks. The study demonstrated the potential of using large language models fine-tuned using domain-specific knowledge like RadOnc-GPT to achieve transformational capabilities in highly specialized healthcare fields such as radiation oncology. However, our model's clinical relevance requires confirmation, and it specializes in only the aforementioned three specific tasks and lacks broader applicability. Furthermore, its evaluation through ROUGE scores might not reflect the true semantic and clinical accuracy - challenges we intend to address in future research. △ Less

Submitted 5 November, 2023; v1 submitted 18 September, 2023; originally announced September 2023.

Artificial General Intelligence for Radiation Oncology

Authors: Chenbin Liu, Zhengliang Liu, Jason Holmes, Lu Zhang, Lian Zhang, Yuzhen Ding, Peng Shu, Zihao Wu, Haixing Dai, Yiwei Li, Dinggang Shen, Ninghao Liu, Quanzheng Li, Xiang Li, Dajiang Zhu, Tianming Liu, Wei Liu

Abstract: The emergence of artificial general intelligence (AGI) is transforming radiation oncology. As prominent vanguards of AGI, large language models (LLMs) such as GPT-4 and PaLM 2 can process extensive texts and large vision models (LVMs) such as the Segment Anything Model (SAM) can process extensive imaging data to enhance the efficiency and precision of radiation therapy. This paper explores full-sp… ▽ More The emergence of artificial general intelligence (AGI) is transforming radiation oncology. As prominent vanguards of AGI, large language models (LLMs) such as GPT-4 and PaLM 2 can process extensive texts and large vision models (LVMs) such as the Segment Anything Model (SAM) can process extensive imaging data to enhance the efficiency and precision of radiation therapy. This paper explores full-spectrum applications of AGI across radiation oncology including initial consultation, simulation, treatment planning, treatment delivery, treatment verification, and patient follow-up. The fusion of vision data with LLMs also creates powerful multimodal models that elucidate nuanced clinical patterns. Together, AGI promises to catalyze a shift towards data-driven, personalized radiation therapy. However, these models should complement human expertise and care. This paper provides an overview of how AGI can transform radiation oncology to elevate the standard of patient care in radiation oncology, with the key insight being AGI's ability to exploit multimodal clinical data at scale. △ Less

Submitted 5 September, 2023; originally announced September 2023.

Robust autofocusing propagation in turbulence

Authors: Nana Liu, Liu Tan, Kaijian Chen, Peilong Hong, Xiaoming Mo, Bingsuo Zou, Yi Liang

Abstract: We conducted a comprehensive study on the robust propagation of the same spot-size Gaussian beam (SSGB), same envelope Gaussian beam (SEGB), Circular Airy beam (CAB) and Circular Pearcey beam (CPB) in complex environments. Our findings clearly demonstrate that autofocusing beams exhibit higher stability in propagation compared with the Gaussian beams. To validate our results, we statistically anal… ▽ More We conducted a comprehensive study on the robust propagation of the same spot-size Gaussian beam (SSGB), same envelope Gaussian beam (SEGB), Circular Airy beam (CAB) and Circular Pearcey beam (CPB) in complex environments. Our findings clearly demonstrate that autofocusing beams exhibit higher stability in propagation compared with the Gaussian beams. To validate our results, we statistically analyze the intensity fluctuation of autofocusing beams and Gaussian beams. The analysis reveals that the intensity fluctuations of autofocusing beams are significantly smaller than that of Gaussian beams. Furthermore, we study the variation of the coherence factor and find that the coherence of autofocusing beams is better than that of Gaussian beams under turbulence. Additionally, we observe the change of the scintillation index (SI) with the propagation distance z, and our results show that autofocusing beams exhibit less oscillation than Gaussian beams, indicating that autofocusing beams propagate in complex environments with less distortion and fewer intensity fluctuation. Overall, our results suggest that autofocusing beams are promising for applications such as optical trapping and manipulation in complex environments. Our study provides valuable insights into the selection of stable beams that exhibit high intensity and high field gradient at the focal position in complex environments. △ Less

Submitted 27 August, 2023; originally announced August 2023.

Comments: 10pages, 6figures

Electrochemically-controlled metasurfaces with high-contrast switching at visible frequencies

Authors: R. Kaissner, J. X. Li, W. Z. Lu, X. Li, F. Neubrech, J. F. Wang, N. Liu

Abstract: Recently in nanophotonics, a rigorous evolution from passive to active metasurfaces has been witnessed. This advancement not only brings forward interesting physical phenomena but also elicits opportunities for practical applications. However, active metasurfaces operating at visible frequencies often exhibit low performance due to design and fabrication restrictions at the nanoscale. In this work… ▽ More Recently in nanophotonics, a rigorous evolution from passive to active metasurfaces has been witnessed. This advancement not only brings forward interesting physical phenomena but also elicits opportunities for practical applications. However, active metasurfaces operating at visible frequencies often exhibit low performance due to design and fabrication restrictions at the nanoscale. In this work, we demonstrate electrochemically controlled metasurfaces with high intensity contrast, fast switching rate, and excellent reversibility at visible frequencies. We use a conducting polymer, polyaniline (PANI), that can be locally conjugated on preselected gold nanorods to actively control the phase profiles of the metasurfaces. The optical responses of the metasurfaces can be in situ monitored and optimized by controlling the PANI growth of subwavelength dimension during the electrochemical process. We showcase electrochemically controlled anomalous transmission and holography with good switching performance. Such electrochemically powered optical metasurfaces lay a solid basis to develop metasurface devices for real-world optical applications. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Journal ref: Science Advances 7, eabd9450 (2021)

Synthesized complex-frequency excitation for ultrasensitive molecular sensing

Authors: Kebo Zeng, Chenchen Wu, Xiangdong Guo, Fuxin Guan, Yu Duan, Lauren L Zhang, Xiaoxia Yang, Na Liu, Qing Dai, Shuang Zhang

Abstract: Detecting trace molecules remains a significant challenge. Surface-enhanced infrared absorption (SEIRA) based on plasmonic nanostructures, particularly graphene, has emerged as a promising approach to enhance sensing sensitivity. While graphene-based SEIRA offers advantages such as ultrahigh sensitivity and active tunability, intrinsic molecular damping weakens the interaction between vibrational… ▽ More Detecting trace molecules remains a significant challenge. Surface-enhanced infrared absorption (SEIRA) based on plasmonic nanostructures, particularly graphene, has emerged as a promising approach to enhance sensing sensitivity. While graphene-based SEIRA offers advantages such as ultrahigh sensitivity and active tunability, intrinsic molecular damping weakens the interaction between vibrational modes and plasmons. Here, we demonstrate ultrahigh-sensitive molecular sensing based on synthesized complex-frequency waves (CFW). Our experiment shows that CFW can amplify the molecular signals (~1.2-nm-thick silk protein layer) detected by graphene-based sensor by at least an order of magnitude and can be universally applied to molecular sensing in different phases. Our approach is highly scalable and can facilitate the investigation of light-matter interactions, enabling diverse potential applications in fields such as optical spectroscopy, metasurfaces, optoelectronics, biomedicine and pharmaceutics. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: 21 pages, 4 figures

Manipulate Quantum Emission by Interface States between Multi-component Moiré Lattice and Metasurface

Authors: Z. N. Liu, X. Q. Zhao, Y. L. Zhao, S. N. Zhu, H. Liu

Abstract: In recent years, moiré lattice has become a hot topic and inspired the research upsurge of moiré lattice. In this work, we propose a method of constructing a multi-composite moiré lattice, which is composed of over three periodic component structures. Moreover, we propose the moiré lattice-metasurface structure, which can realize the multi-wavelength interface states between these kinds of moiré l… ▽ More In recent years, moiré lattice has become a hot topic and inspired the research upsurge of moiré lattice. In this work, we propose a method of constructing a multi-composite moiré lattice, which is composed of over three periodic component structures. Moreover, we propose the moiré lattice-metasurface structure, which can realize the multi-wavelength interface states between these kinds of moiré lattices and metasurfaces. The wavelength, polarization, and number of moiré interface states can be manipulated flexibly, with anisotropic metasurfaces. These multi-wavelength interface states are employed to enhance quantum emission (QE) and over 20 times QE efficiency can be obtained. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Comments: 26 pages, 5 figures

Journal ref: Physical Review A 108, 013502 (2023)

Silicon tracker array for RIB experiments at SAMURAI

Authors: A. I. Stefanescu, V. Panin, L. Trache, T. Motobayashi, H. Otsu, A. Saastamoinen, T. Uesaka, L. Stuhl, J. Tanaka, D. Tudor, I. C. Stefanescu, A. E. Spiridon, K. Yoneda, H. Baba, M. Kurokawa, Y. Togano, Z. Halasz, M. Sasano, S. Ota, Y. Kubota, D. S. Ahn, T. Kobayashi, Z. Elekes, N. Fukuda, H. Takeda , et al. (27 additional authors not shown)

Abstract: This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions o… ▽ More This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions of interest for nuclear astrophysics. The technical characteristics of the tracking array are described in detail as are its performance in two pilot experiments. The physics justification for such a system is also presented. △ Less

Submitted 13 July, 2023; originally announced July 2023.

Journal ref: Eur. Phys. J. A (2022) 58:223

Investigation on trapping capability of circular swallowtail beams

Authors: Huanpeng Liang, Kaijian Chen, Nana Liu, Liu Tan, Fuxi Lu, Shaozhou Jiang, Yi Liang

Abstract: Circular swallowtail beams (CSBs) with their remarkable autofocusing capability have garnered significant interests due to their potential applications in optical trapping. This study delves into a comprehensive investigation of the trapping force properties of CSBs. Through a combination of experimental observations and theoretical analysis, we systematically explore the quantitative manipulation… ▽ More Circular swallowtail beams (CSBs) with their remarkable autofocusing capability have garnered significant interests due to their potential applications in optical trapping. This study delves into a comprehensive investigation of the trapping force properties of CSBs. Through a combination of experimental observations and theoretical analysis, we systematically explore the quantitative manipulation of trapping forces by adjusting specific parameters. This detailed investigation provides insights into the trapping force performance and stability of CSBs. Furthermore, the experimental validation of particle trapping using CSBs underscores their effectiveness, emphasizing their significant potential for optical manipulation and trapping applications. △ Less

Submitted 2 December, 2023; v1 submitted 8 July, 2023; originally announced July 2023.

Comments: 6 pages, 4 figures

ClimSim-Online: A Large Multi-scale Dataset and Framework for Hybrid ML-physics Climate Emulation

Authors: Sungduk Yu, Zeyuan Hu, Akshay Subramaniam, Walter Hannah, Liran Peng, Jerry Lin, Mohamed Aziz Bhouri, Ritwik Gupta, Björn Lütjens, Justus C. Will, Gunnar Behrens, Julius J. M. Busecke, Nora Loose, Charles I. Stern, Tom Beucler, Bryce Harrop, Helge Heuer, Benjamin R. Hillman, Andrea Jenney, Nana Liu, Alistair White, Tian Zheng, Zhiming Kuang, Fiaz Ahmed, Elizabeth Barnes , et al. (22 additional authors not shown)

Abstract: Modern climate projections lack adequate spatial and temporal resolution due to computational constraints, leading to inaccuracies in representing critical processes like thunderstorms that occur on the sub-resolution scale. Hybrid methods combining physics with machine learning (ML) offer faster, higher fidelity climate simulations by outsourcing compute-hungry, high-resolution simulations to ML… ▽ More Modern climate projections lack adequate spatial and temporal resolution due to computational constraints, leading to inaccuracies in representing critical processes like thunderstorms that occur on the sub-resolution scale. Hybrid methods combining physics with machine learning (ML) offer faster, higher fidelity climate simulations by outsourcing compute-hungry, high-resolution simulations to ML emulators. However, these hybrid ML-physics simulations require domain-specific data and workflows that have been inaccessible to many ML experts. As an extension of the ClimSim dataset (Yu et al., 2024), we present ClimSim-Online, which also includes an end-to-end workflow for developing hybrid ML-physics simulators. The ClimSim dataset includes 5.7 billion pairs of multivariate input/output vectors, capturing the influence of high-resolution, high-fidelity physics on a host climate simulator's macro-scale state. The dataset is global and spans ten years at a high sampling frequency. We provide a cross-platform, containerized pipeline to integrate ML models into operational climate simulators for hybrid testing. We also implement various ML baselines, alongside a hybrid baseline simulator, to highlight the ML challenges of building stable, skillful emulators. The data (https://huggingface.co/datasets/LEAP/ClimSim_high-res) and code (https://leap-stc.github.io/ClimSim and https://github.com/leap-stc/climsim-online) are publicly released to support the development of hybrid ML-physics and high-fidelity climate simulations. △ Less

Submitted 8 July, 2024; v1 submitted 14 June, 2023; originally announced June 2023.

Comments: This manuscript is an expanded version of our paper that received the Outstanding Paper Award at the NeurIPS 2023 conference

Designing a Transition Photonic Band with a Synthetic Moire Sphere

Authors: Z. N. Liu, X. Q. Zhao, J. Yao, C. Zhang, J. L. Xu, S. N. Zhu, H. Liu

Abstract: In recent years, twisted bilayer graphene has become a hot topic and inspired the research upsurge of photonic moiré lattice. Here, we designed a photonic moiré superlattice with two synthetic twist angles and constructed a synthetic moiré sphere based on these two angles. Thus, we have more degrees of freedom to design the band structure flexibly. A type of transition photonic bands (TPBs) is obt… ▽ More In recent years, twisted bilayer graphene has become a hot topic and inspired the research upsurge of photonic moiré lattice. Here, we designed a photonic moiré superlattice with two synthetic twist angles and constructed a synthetic moiré sphere based on these two angles. Thus, we have more degrees of freedom to design the band structure flexibly. A type of transition photonic bands (TPBs) is obtained in such a moiré superlattice. We investigate the influence of two twist angles on TPBs and find a series of magic angle pairs with optimal band compression of TPB. The interesting optical properties of TPBs are experimentally demonstrated, including pulse delay, nonlinear optical enhancement, and pulse width compression. Our work introduces a new path to explore multi-twist angles moiré superlattices and reveals that the designed photonic moiré superlattice based on moiré spheres has broad application prospects including optical signal processing, nonlinear optics processes ,and other light-matter interactions. △ Less

Submitted 15 May, 2023; originally announced May 2023.

Journal ref: Phys. Rev. Applied 19, 044054 (2023)

Controllable nonlinear propagation of partially incoherent Airy beams

Authors: Kaijian Chen, Peiyu Zhang, Nana Liu, Liu Tan, Peilong Hong, Bingsuo Zou, Jingjun Xu, Yi Liang

Abstract: The self-accelerating beams such as the Airy beam show great potentials in many applications including optical manipulation, imaging and communication. However, their superior features during linear propagation could be easily corrupted by optical nonlinearity or spatial incoherence individually. Here we investigate how the interaction of spatial incoherence and nonlinear propagation affect the be… ▽ More The self-accelerating beams such as the Airy beam show great potentials in many applications including optical manipulation, imaging and communication. However, their superior features during linear propagation could be easily corrupted by optical nonlinearity or spatial incoherence individually. Here we investigate how the interaction of spatial incoherence and nonlinear propagation affect the beam quality of Airy beam, and find that the two destroying factors can in fact balance each other. Our results show that the influence of coherence and nonlinearity on the propagation of partially incoherent Airy beams (PIABs) can be formulated as two exponential functions that have factors of opposite signs. With appropriate spatial coherence length, the PIABs not only resist the corruption of beam profile caused by self-focusing nonlinearity, but also exhibits less anomalous diffraction caused by the self-defocusing nonlinearity. Our work provides deep insight into how to maintain the beam quality of self-accelerating Airy beams by exploiting the interaction between partially incoherence and optical nonlinearity. Our results may bring about new possibilities for optimizing partially incoherent structured field and developing related applications such as optical communication, incoherent imaging and optical manipulations. △ Less

Submitted 26 June, 2023; v1 submitted 5 April, 2023; originally announced April 2023.

Comments: 12pages,6 figures

Real-Time Tracking of Coherent Oscillations of Electrons in a Nanodevice by Photo-assisted Tunnelling

Authors: Yang Luo, Frank Neubrech, Alberto Martin-Jimenez, Na Liu, Klaus Kern, Manish Garg

Abstract: Coherent collective oscillations of electrons excited in metallic nanostructures (localized surface plasmons) can confine incident light to atomic scales and enable strong light-matter interactions, which depend nonlinearly on the local field. Direct sampling of such collective electron oscillations in real-time is crucial to performing petahertz scale optical modulation, control, and readout in a… ▽ More Coherent collective oscillations of electrons excited in metallic nanostructures (localized surface plasmons) can confine incident light to atomic scales and enable strong light-matter interactions, which depend nonlinearly on the local field. Direct sampling of such collective electron oscillations in real-time is crucial to performing petahertz scale optical modulation, control, and readout in a quantum nanodevice. Here, we demonstrate real-time tracking of collective electron oscillations in an Au bowtie nanoantenna, by recording photo-assisted tunnelling currents generated by such oscillations in this quantum nanodevice. The collective electron oscillations show a noninstantaneous response to the driving laser fields with a decay time of nearly 10 femtoseconds. The temporal evolution of nonlinear electron oscillations resulting from the coherent nonlinear optical response of the nanodevice were also traced in real-time. The contributions of linear and nonlinear electron oscillations in the generated tunnelling currents in the nanodevice were precisely determined. A coherent control of electron oscillations in the nanodevice is illustrated directly in the time domain. Functioning in ambient conditions, the excitation, coherent control, and read-out of coherent electron oscillations pave the way toward on-chip light-wave electronics in quantum nanodevices. △ Less

Submitted 29 March, 2023; originally announced March 2023.

Unconditional and robust quantum metrological advantage beyond NOON states

Authors: Jian Qin, Yu-Hao Deng, Han-Sen Zhong, Li-Chao Peng, Hao Su, Yi-Han Luo, Jia-Min Xu, Dian Wu, Si-Qiu Gong, Hua-Liang Liu, Hui Wang, Ming-Cheng Chen, Li Li, Nai-Le Liu, Chao-Yang Lu, Jian-Wei Pan

Abstract: Quantum metrology employs quantum resources to enhance the measurement sensitivity beyond that can be achieved classically. While multi-photon entangled NOON states can in principle beat the shot-noise limit and reach the Heisenberg limit, high NOON states are difficult to prepare and fragile to photon loss which hinders it from reaching unconditional quantum metrological advantages. Here, we comb… ▽ More Quantum metrology employs quantum resources to enhance the measurement sensitivity beyond that can be achieved classically. While multi-photon entangled NOON states can in principle beat the shot-noise limit and reach the Heisenberg limit, high NOON states are difficult to prepare and fragile to photon loss which hinders it from reaching unconditional quantum metrological advantages. Here, we combine the idea of unconventional nonlinear interferometers and stimulated emission of squeezed light, previously developed for photonic quantum computer Jiuzhang, to propose and realize a new scheme that achieves a scalable, unconditional, and robust quantum metrological advantage. We observe a 5.8(1)-fold enhancement above the shot-noise limit in the Fisher information extracted per photon, without discounting for photon loss and imperfections, which outperforms ideal 5-NOON states. The Heisenberg-limited scaling, the robustness to external photon loss, and the ease-to-use of our method make it applicable in practical quantum metrology at low photon flux regime. △ Less

Submitted 14 February, 2023; v1 submitted 2 February, 2023; originally announced February 2023.

Comments: To be published, with an independent and simultaneous submission on arXiv:2111.09756

STRASSE: A Silicon Tracker for Quasi-free Scattering Measurements at the RIBF

Authors: H. N. Liu, F. Flavigny, H. Baba, M. Boehmer, U. Bonnes, V. Borshchov, P. Doornenbal, N. Ebina, M. Enciu, A. Frotscher, R. Gernhäuser, V. Girard-Alcindor, D. Goupillière, J. Heuser, R. Kapell, Y. Kondo, H. Lee, J. Lehnert, T. Matsui, A. Matta, T. Nakamura, A. Obertelli, T. Pohl, M. Protsenko, M. Sasano , et al. (13 additional authors not shown)

Abstract: STRASSE (Silicon Tracker for RAdioactive nuclei Studies at SAMURAI Experiments) is a new detection system under construction for quasi-free scattering (QFS) measurements at 200-250 MeV/nucleon at the RIBF facility of the RIKEN Nishina Center. It consists of a charged-particle silicon tracker coupled with a dedicated thick liquid hydrogen target (up to 150-mm long) in a compact geometry to fit insi… ▽ More STRASSE (Silicon Tracker for RAdioactive nuclei Studies at SAMURAI Experiments) is a new detection system under construction for quasi-free scattering (QFS) measurements at 200-250 MeV/nucleon at the RIBF facility of the RIKEN Nishina Center. It consists of a charged-particle silicon tracker coupled with a dedicated thick liquid hydrogen target (up to 150-mm long) in a compact geometry to fit inside large scintillator or germanium arrays. Its design was optimized for two types of studies using QFS: missing-mass measurements and in-flight prompt $γ$-ray spectroscopy. This article describes (i) the resolution requirements needed to go beyond the sensitivity of existing systems for these two types of measurements, (ii) the conceptual design of the system using detailed simulations of the setup and (iii) its complete technical implementation and challenges. The final tracker aims at a sub-mm reaction vertex resolution and is expected to reach a missing-mass resolution below 2 MeV in $σ$ for $(p,2p)$ reactions when combined with the CsI(Na) CATANA array. △ Less

Submitted 23 January, 2023; originally announced January 2023.

Comments: 25 pages, 29 figures

The application of Nano-silica gel in sealing well micro-annuli and cement channeling

Authors: Olaytunji Olayiwola, Vu Nguyen, Randy Andres, Ning Liu

Abstract: The possibility for hydrocarbon fluids to migrate through debonded micro-annuli wells is a major concern in the petroleum industry. With effective permeability of 0.1-1.0 mD, the existence of channels in a cement annulus with apertures of 10-300 micrometer constitutes a major threat. Squeeze cement is typically difficult to repair channels-leakage with small apertures; hence, a low-viscosity seale… ▽ More The possibility for hydrocarbon fluids to migrate through debonded micro-annuli wells is a major concern in the petroleum industry. With effective permeability of 0.1-1.0 mD, the existence of channels in a cement annulus with apertures of 10-300 micrometer constitutes a major threat. Squeeze cement is typically difficult to repair channels-leakage with small apertures; hence, a low-viscosity sealer that can be inserted into these channels while producing a long-term resilient seal is sought. A novel application using nano-silica sealants could be the key to seal these channels. In the construction and sealing of hydrocarbon wells, cementing is a critical phase. Cement is prone to cracking during the life cycle of a well because of the changes in downhole conditions. The usage of micro-sized cross-linked nano-silica gel as a sealant material to minimize damaged cement sheaths is investigated in this study. Fluid leakage through channels in the cement was investigated using an experimental system. With a diameter of 0.05 inches, the impact of the cement channel size was explored. The sealing efficiency increased from 86 percent to 95 percent when the nano-silica concentration of the sealing gel increased from 13 percent to 25 percent. This demonstrates that the concentration of nano-silica in the sealing gel affects the gel's ability to seal against fluid flow. This research proposes a new way for improving cement zonal isolation and thereby lowering the impact of cement failure in the oil and gas industry. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: 10 pages

Well Cement Degradation and Wellbore Integrity in Geological CO2 Storages: A Literature Review

Authors: Vu Nguyen, Olatunji Olayiwola, Boyun Guo, Ning Liu

Abstract: Carbon capture and storage (CCS) has emerged as the most effective method to curb the CO2 concentration in the atmosphere. It can store up to 5 billion tons of CO2 per year. To guarantee a safe and economical geological storage, the well cement degradation and wellbore integrity need to be studied thoroughly. This review paper is designed to provide a fundamental background of well cement degradat… ▽ More Carbon capture and storage (CCS) has emerged as the most effective method to curb the CO2 concentration in the atmosphere. It can store up to 5 billion tons of CO2 per year. To guarantee a safe and economical geological storage, the well cement degradation and wellbore integrity need to be studied thoroughly. This review paper is designed to provide a fundamental background of well cement degradation and wellbore integrity in geological CO2 storages to support the researchers in further investigation. The review mainly focuses on mechanical, thermal, chemical property changes and corrosion time for cement in experiments and simulation during geological CO2 storage. However, the debonding interface between casing/cement or cement/formation has not been addressed profoundly. A further investigation should inspect how pressure, temperature, and chemical reaction affect the micro-annuli of casing/cement or cement/formation. Also, a mathe-matical model should be established to predict the corrosion rate in geological CO2 storage. △ Less

Submitted 10 January, 2023; v1 submitted 5 January, 2023; originally announced January 2023.

Comments: 17 pages

Journal ref: Petroleum & Petrochemical Engineering 5 (2021)

Complex Skin Modes in Non-Hermitian Coupled Laser Arrays

Authors: Yuzhou G. N. Liu, Yunxuan Wei, Omid Hemmatyar, Georgios G. Pyrialakos, Pawel S. Jung, Demetrios N. Christodoulides, Mercedeh Khajavikhan

Abstract: From biological ecosystems to spin glasses, connectivity plays a crucial role in determining the function, dynamics, and resiliency of a network. In the realm of non-Hermitian physics, the possibility of complex and asymmetric exchange interactions (|kappa_ij| not equal to |kappa_ji|) between a network of oscillators has been theoretically shown to lead to novel behaviors like delocalization, skin… ▽ More From biological ecosystems to spin glasses, connectivity plays a crucial role in determining the function, dynamics, and resiliency of a network. In the realm of non-Hermitian physics, the possibility of complex and asymmetric exchange interactions (|kappa_ij| not equal to |kappa_ji|) between a network of oscillators has been theoretically shown to lead to novel behaviors like delocalization, skin effect, and bulk-boundary correspondence. An archetypical lattice exhibiting the aforementioned properties is that proposed by Hatano and Nelson in a series of papers in late 1990s. While the ramifications of these theoretical works in optics have been recently pursued in synthetic dimensions, the Hatano-Nelson model has yet to be realized in real space. What makes the implementation of these lattices challenging is the difficulty in establishing the required asymmetric exchange interactions in optical platforms. In this work, by using active optical oscillators featuring non-Hermiticity and nonlinearity, we introduce an anisotropic exchange between the resonant elements in a lattice, an aspect that enables us to observe the non-Hermitian skin effect, phase locking, and near-field beam steering in a Hatano-Nelson laser array. Our work opens up new regimes of phase-locking in lasers while shedding light on the fundamental physics of non-Hermitian systems. △ Less

Submitted 18 December, 2022; originally announced December 2022.

Journal ref: Light Sci Appl 11, 336 (2022)

Reduced-order variational mode decomposition

Authors: Zi-Mo Liao, Zhiye Zhao, Liang-Bing Chen, Zhen-Hua Wan, Nan-Sheng Liu, Xi-Yun Lu

Abstract: A novel data-driven method of modal analysis for complex flow dynamics, termed as reduced-order variational mode decomposition (RVMD), has been proposed, combining the idea of the separation of variables and a state-of-the-art nonstationary signal-processing technique -- variational mode decomposition. It enables a low-redundant adaptive extraction of coherent structures in statistically nonstatio… ▽ More A novel data-driven method of modal analysis for complex flow dynamics, termed as reduced-order variational mode decomposition (RVMD), has been proposed, combining the idea of the separation of variables and a state-of-the-art nonstationary signal-processing technique -- variational mode decomposition. It enables a low-redundant adaptive extraction of coherent structures in statistically nonstationary flows, with its modes computed by solving an elaborate optimization problem using the block coordinate descent algorithm. Discussion on the intrinsic relations between RVMD and some classic modal decomposition methods demonstrates that RVMD can be reduced into proper orthogonal decomposition (POD) or discrete Fourier transform (DFT) at particular parameter settings. The significant advantages of RVMD for performing time-frequency analysis are highlighted by a signal-processing analogous categorization of the widely-used modal decomposition techniques. It is also confirmed that the combination of RVMD and the Hilbert spectral analysis provides a physically intuitive way to explore the space-time-frequency characteristics of transient dynamics. Finally, all the appealing features of RVMD mentioned above are well verified via two canonical flow problems: the transient cylinder wake and the rectangular turbulent supersonic screeching jet. △ Less

Submitted 26 September, 2022; originally announced September 2022.

High-accuracy three-dimensional surface detection in smoothed particle hydrodynamics for free-surface flows

Authors: Wen-Bin Liu, Dong-Jun Ma, Jian-Zhen Qian, Ming-Yu Zhang, An-Min He, Nan-Sheng Liu, Pei Wang

Abstract: In this study, we investigate high-accuracy three-dimensional surface detection in smoothed particle hydrodynamics for free-surface flows. A new geometrical method is first developed to enhance the accuracy of free-surface particle detection in complex flows. This method detects free-surface particles via continuous global scanning inside the sphere of a particle through a cone region whose vertex… ▽ More In this study, we investigate high-accuracy three-dimensional surface detection in smoothed particle hydrodynamics for free-surface flows. A new geometrical method is first developed to enhance the accuracy of free-surface particle detection in complex flows. This method detects free-surface particles via continuous global scanning inside the sphere of a particle through a cone region whose vertex corresponds to the particle position. The particle is identified as a free-surface particle if there exists a cone region with no neighboring particles. Next, an efficient semi-geometrical method is proposed based on the geometrical method to reduce the computational cost. It consists of finding particles near the free surface via position divergence and then detecting these particles using the geometrical method to identify free-surface particles. The accuracy and robustness of the proposed method are demonstrated by performing tests on several model problems. △ Less

Submitted 3 May, 2022; originally announced May 2022.

Majorana Bound State Cavities

Authors: Babak Bahari, Jae-Hyuck Choi, Yuzhou G. N. Liu, Mercedeh Khajavikhan

Abstract: Cavities play a fundamental role in optical physics by providing spatio-temporal confinement of energy that facilitates light-matter interactions. They are routinely utilized in a variety of settings, ranging from lasers to spectral filters, to nonlinear wave mixers, and modulators. While their resonant properties make them suitable for sensing, in many applications, like in lasers, it is desired… ▽ More Cavities play a fundamental role in optical physics by providing spatio-temporal confinement of energy that facilitates light-matter interactions. They are routinely utilized in a variety of settings, ranging from lasers to spectral filters, to nonlinear wave mixers, and modulators. While their resonant properties make them suitable for sensing, in many applications, like in lasers, it is desired to alleviate their sensitivity in order to make a device more resilient to perturbations. Along these lines there have been several recent reports of using concepts from topological physics in order to design laser arrays that are inherently more robust. Here, we present a new class of topological cavities based on Majorana bound states that provide unique scaling features as well as non-degenerate single-mode behaviors. These cavities may lead to a new family of lasers and laser arrays that are robust to defects, fabrication imperfections, and external perturbations. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Gain Induced Topological Response via Tailored Long-range Interactions

Authors: Yuzhou G. N. Liu, Pawel S. Jung, Midya Parto, Demetrios N. Christodoulides, Mercedeh Khajavikhan

Abstract: The ability to tailor the hopping interactions between the constituent elements of a physical system could enable the observation of unusual phenomena that are otherwise inaccessible in standard settings. In this regard, a number of recent theoretical studies have indicated that an asymmetry in either the short- or long-range complex exchange constants can lead to counterintuitive effects, for exa… ▽ More The ability to tailor the hopping interactions between the constituent elements of a physical system could enable the observation of unusual phenomena that are otherwise inaccessible in standard settings. In this regard, a number of recent theoretical studies have indicated that an asymmetry in either the short- or long-range complex exchange constants can lead to counterintuitive effects, for example, the possibility of a Kramer's degeneracy even in the absence of spin 1/2 or the breakdown of the bulk-boundary correspondence. Here, we show how such tailored asymmetric interactions can be realized in photonic integrated platforms by exploiting non-Hermitian concepts, enabling a class of topological behaviors induced by optical gain. As a demonstration, we implement the Haldane model, a canonical lattice that relies on asymmetric long-range hopping in order to exhibit quantum Hall behavior without a net external magnetic flux. The topological response observed in this lattice is a result of gain and vanishes in a passive but otherwise identical structure. Our findings not only enable the realization of a wide class of non-trivial phenomena associated with tailored interactions, but also opens up avenues to study the role of gain and nonlinearity in topological systems in the presence of quantum noise. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: The supplementary information is available from the Journal's website

Topological Modes in a Laser Cavity through Exceptional State Transfer

Authors: A. Schumer, Y. G. N. Liu, J. Leshin, L. Ding, Y. Alahmadi, A. U. Hassan, H. Nasari, S. Rotter, D. N. Christodoulides, P. LiKamWa, M. Khajavikhan

Abstract: Shaping the light emission characteristics of laser systems is of great importance in various areas of science and technology. In a typical lasing arrangement, the spatial profile of the mode tends to remain self-similar throughout the cavity. Here, we introduce a paradigm shift where a spatially evolving mode is faithfully settled into a pair of bi-orthogonal states at the two facets of a laser c… ▽ More Shaping the light emission characteristics of laser systems is of great importance in various areas of science and technology. In a typical lasing arrangement, the spatial profile of the mode tends to remain self-similar throughout the cavity. Here, we introduce a paradigm shift where a spatially evolving mode is faithfully settled into a pair of bi-orthogonal states at the two facets of a laser cavity. This is achieved by deliberately eliminating non-adiabatic jumps in a purposely designed structure that features a dynamic encirclement of a non-Hermitian exceptional point. The resulting state transfer reflects the unique topology of the associated Riemann surfaces. Our approach provides a route to develop versatile mode selective active △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: A supplemental file is available on the Journal's website

Journal ref: Science 375, 884-888 (2022)

Quantum algorithms for computing observables of nonlinear partial differential equations

Authors: Shi Jin, Nana Liu

Abstract: We construct quantum algorithms to compute physical observables of nonlinear PDEs with M initial data. Based on an exact mapping between nonlinear and linear PDEs using the level set method, these new quantum algorithms for nonlinear Hamilton-Jacobi and scalar hyperbolic PDEs can be performed with a computational cost that is independent of M, for arbitrary nonlinearity. Depending on the details o… ▽ More We construct quantum algorithms to compute physical observables of nonlinear PDEs with M initial data. Based on an exact mapping between nonlinear and linear PDEs using the level set method, these new quantum algorithms for nonlinear Hamilton-Jacobi and scalar hyperbolic PDEs can be performed with a computational cost that is independent of M, for arbitrary nonlinearity. Depending on the details of the initial data, it can also display up to exponential advantage in both the dimension of the PDE and the error in computing its observables. For general nonlinear PDEs, quantum advantage with respect to M is possible in the large M limit. △ Less

Submitted 15 February, 2022; originally announced February 2022.

On quantum algorithms for the Schrödinger equation in the semi-classical regime

Authors: Shi Jin, Xiantao Li, Nana Liu

Abstract: Solving the time-dependent Schrödinger equation is an important application area for quantum algorithms. We consider Schrödinger's equation in the semi-classical regime. Here the solutions exhibit strong multiple-scale behavior due to a small parameter $\hbar$, in the sense that the dynamics of the quantum states and the induced observables can occur on different spatial and temporal scales. Such… ▽ More Solving the time-dependent Schrödinger equation is an important application area for quantum algorithms. We consider Schrödinger's equation in the semi-classical regime. Here the solutions exhibit strong multiple-scale behavior due to a small parameter $\hbar$, in the sense that the dynamics of the quantum states and the induced observables can occur on different spatial and temporal scales. Such a Schrödinger equation finds many applications, including in Born-Oppenheimer molecular dynamics and Ehrenfest dynamics. This paper considers quantum analogues of pseudo-spectral (PS) methods on classical computers. Estimates on the gate counts in terms of $\hbar$ and the precision $\varepsilon$ are obtained. It is found that the number of required qubits, $m$, scales only logarithmically with respect to $\hbar$. When the solution has bounded derivatives up to order $\ell$, the symmetric Trotting method has gate complexity $\mathcal{O}\Big({ (\varepsilon \hbar)^{-\frac12} \mathrm{polylog}(\varepsilon^{-\frac{3}{2\ell}} \hbar^{-1-\frac{1}{2\ell}})}\Big),$ provided that the diagonal unitary operators in the pseudo-spectral methods can be implemented with $\mathrm{poly}(m)$ operations. When physical observables are the desired outcomes, however, the step size in the time integration can be chosen independently of $\hbar$. The gate complexity in this case is reduced to $\mathcal{O}\Big({\varepsilon^{-\frac12} \mathrm{polylog}( \varepsilon^{-\frac3{2\ell}} \hbar^{-1} )}\Big),$ with $\ell$ again indicating the smoothness of the solution. △ Less

Submitted 3 June, 2022; v1 submitted 25 December, 2021; originally announced December 2021.

Journal ref: Quantum 6, 739 (2022)

Two-dimensional ZIF-L nanosheets as high performance non-enzymatic glucose sensor

Authors: Nana Liu, Ningyan Cheng, Chengwu Yang, Weichang Hao, Yi Du

Abstract: An effective biosensor based on two-dimensional (2D) Co-ZIF-L nanosheets for sensitive electrochemical non-enzymatic glucose detection is developed, which exhibits high electrocalalytic activities towards glucose due to the ordered porous structure as well as ultrahigh specific surface area. The fabricated Co-ZIF-L nanosheets electrodes present an outstanding performance with higher sensitivity of… ▽ More An effective biosensor based on two-dimensional (2D) Co-ZIF-L nanosheets for sensitive electrochemical non-enzymatic glucose detection is developed, which exhibits high electrocalalytic activities towards glucose due to the ordered porous structure as well as ultrahigh specific surface area. The fabricated Co-ZIF-L nanosheets electrodes present an outstanding performance with higher sensitivity of 769.5 *10$^{-6}$ A mM$^{-1}$ cm$^{-2}$ and lower detect limit of 90.4 nM, while the constructed 3D ZIF-67 nanoparticles electrodes show a weaker sensitivity of 697.4 *10$^{-6}$ A mM$^{-1}$ cm$^{-2}$ and a limited detection range from 2 *10$^{-6}$ M to 414 *10$^{-6}$ M. Furthermore, the Co-ZIF-L based non-enzymatic glucose biosensors possess an acceptable selectivity, long-term stability as well as reproducibility. This work may offer a new approach to develop 2D ZIF nanosheets as a potential candidate in electrochemical biosensors. △ Less

Submitted 14 February, 2022; v1 submitted 9 October, 2021; originally announced October 2021.

Comments: do not want to publish

Interferometric imaging of Intensely Radiating Negative Leaders

Authors: Olaf Scholten, Brian M. Hare, Joe Dwyer, Ningyu Liu, Chris Sterpka, Ivana Kolmasov, Ondrej Santolik, Radek Lan, Ludek Uhlir, Stijn Buitink, Tim Huege, Anna Nelles, Sander ter Veen

Abstract: The common phenomenon of lightning still harbors many secrets and only recently a new propagation mode was observed for negative leaders. While propagating in this `Intensely Radiating Negative Leader' (IRNL) mode a negative leader emits 100 times more very-high frequency (VHF) and broadband radiation than a more normal negative leader. We have reported that this mode occurs soon after initiation… ▽ More The common phenomenon of lightning still harbors many secrets and only recently a new propagation mode was observed for negative leaders. While propagating in this `Intensely Radiating Negative Leader' (IRNL) mode a negative leader emits 100 times more very-high frequency (VHF) and broadband radiation than a more normal negative leader. We have reported that this mode occurs soon after initiation of all lightning flashes we have mapped as well as sometimes long thereafter. Because of the profuse emission of VHF the leader structure is very difficult to image. In this work we report on measurements made with the LOFAR radio telescope, an instrument primarily built for radio-astronomy observations. For this reason, as part of the present work, we have refined our time resolved interferometric 3-Dimensional (TRI-D) imaging to take into account the antenna function. The images from the TRI-D imager show that during an IRNL there is an ionization front with a diameter in excess of 500~m where strong corona bursts occur. This is very different from what is seen for a normal negative leader where the corona bursts happen at the tip, an area of typically 10~m in diameter. The observed massive ionization wave supports the idea that this mode is indicative of a dense charge pocket. △ Less

Submitted 6 October, 2021; originally announced October 2021.

Comments: 13 pages, 5 figures

Journal ref: Phys Rev D 105, 062007 (2022)

A Photonics-based superheterodyne RF reception approach

Authors: Guangyu Gao, Qijun Liang, Ziyu Liu, Huanfa Peng, Qiang Zhao, Naijin Liu

Abstract: A novel photonics-based RF reception approach is proposed as a competitive solution to meet the current challenges of photonic-based approaches and to realize high performances at the same time. The proposed approach adopts the superheterodyne configuration by a combination manner of electronic techniques and photonic techniques, including the ultrawideband generation of optical LO, the two-stage… ▽ More A novel photonics-based RF reception approach is proposed as a competitive solution to meet the current challenges of photonic-based approaches and to realize high performances at the same time. The proposed approach adopts the superheterodyne configuration by a combination manner of electronic techniques and photonic techniques, including the ultrawideband generation of optical LO, the two-stage photonic superheterodyne frequency conversion and the real-time IF compensation. An engineering prototype has been developed and its performance has been evaluated in the laboratory environment. The experiment results preliminarily verify the feasibility of the proposed approach and its engineering potential. The typical performances are as follows: 0.1 GHz~ 45GHz operation spectrum range (>40 GHz), 900 MHz instantaneous bandwidth, 101 dBHz2/3 SFDR and 130 dBHz LDR, image rejections of ~80 dB for 1st frequency conversion and >90 dB for 2nd frequency conversion. △ Less

Submitted 9 August, 2021; originally announced August 2021.

Comments: 11 pages, 18 figures, submitted to the special issue "Decadal Advances and Review: Pursuing Space Science And Technology Innovation" in Advances in Astronautics Science and Technology

Metasurface-Enabled On-Chip Multiplexed Diffractive Neural Networks in the Visible

Authors: Xuhao Luo, Yueqiang Hu, Xin Li, Xiangnian Ou, Jiajie Lai, Na Liu, Huigao Duan

Abstract: Replacing electrons with photons is a compelling route towards light-speed, highly parallel, and low-power artificial intelligence computing. Recently, all-optical diffractive neural deep neural networks have been demonstrated. However, the existing architectures often comprise bulky components and, most critically, they cannot mimic the human brain for multitasking. Here, we demonstrate a multi-s… ▽ More Replacing electrons with photons is a compelling route towards light-speed, highly parallel, and low-power artificial intelligence computing. Recently, all-optical diffractive neural deep neural networks have been demonstrated. However, the existing architectures often comprise bulky components and, most critically, they cannot mimic the human brain for multitasking. Here, we demonstrate a multi-skilled diffractive neural network based on a metasurface device, which can perform on-chip multi-channel sensing and multitasking at the speed of light in the visible. The metasurface is integrated with a complementary metal oxide semiconductor imaging sensor. Polarization multiplexing scheme of the subwavelength nanostructures are applied to construct a multi-channel classifier framework for simultaneous recognition of digital and fashionable items. The areal density of the artificial neurons can reach up to 6.25x106/mm2 multiplied by the number of channels. Our platform provides an integrated solution with all-optical on-chip sensing and computing for applications in machine vision, autonomous driving, and precision medicine. △ Less

Submitted 13 July, 2021; originally announced July 2021.

Phase-Programmable Gaussian Boson Sampling Using Stimulated Squeezed Light

Authors: Han-Sen Zhong, Yu-Hao Deng, Jian Qin, Hui Wang, Ming-Cheng Chen, Li-Chao Peng, Yi-Han Luo, Dian Wu, Si-Qiu Gong, Hao Su, Yi Hu, Peng Hu, Xiao-Yan Yang, Wei-Jun Zhang, Hao Li, Yuxuan Li, Xiao Jiang, Lin Gan, Guangwen Yang, Lixing You, Zhen Wang, Li Li, Nai-Le Liu, Jelmer Renema, Chao-Yang Lu , et al. (1 additional authors not shown)

Abstract: The tantalizing promise of quantum computational speedup in solving certain problems has been strongly supported by recent experimental evidence from a high-fidelity 53-qubit superconducting processor1 and Gaussian boson sampling (GBS) with up to 76 detected photons. Analogous to the increasingly sophisticated Bell tests that continued to refute local hidden variable theories, quantum computationa… ▽ More The tantalizing promise of quantum computational speedup in solving certain problems has been strongly supported by recent experimental evidence from a high-fidelity 53-qubit superconducting processor1 and Gaussian boson sampling (GBS) with up to 76 detected photons. Analogous to the increasingly sophisticated Bell tests that continued to refute local hidden variable theories, quantum computational advantage tests are expected to provide increasingly compelling experimental evidence against the Extended Church-Turing thesis. In this direction, continued competition between upgraded quantum hardware and improved classical simulations is required. Here, we report a new GBS experiment that produces up to 113 detection events out of a 144-mode photonic circuit. We develop a new high-brightness and scalable quantum light source, exploring the idea of stimulated squeezed photons, which has simultaneously near-unity purity and efficiency. This GBS is programmable by tuning the phase of the input squeezed states. We demonstrate a new method to efficiently validate the samples by inferring from computationally friendly subsystems, which rules out hypotheses including distinguishable photons and thermal states. We show that our noisy GBS experiment passes the nonclassicality test using an inequality, and we reveal non-trivial genuine high-order correlation in the GBS samples, which are evidence of robustness against possible classical simulation schemes. The photonic quantum computer, Jiuzhang 2.0, yields a Hilbert space dimension up to $10^{43}$, and a sampling rate $10^{24}$ faster than using brute-force simulation on supercomputers. △ Less

Submitted 5 July, 2021; v1 submitted 29 June, 2021; originally announced June 2021.

Comments: 23 pages, 6 figures. Comments are welcome

smFRET reveals DHX36 repetitive binding,not unfolding,of G-quadruplexes

Authors: Hai-Lei Guo, Na-Nv Liu, Xu-Guang Xi

Abstract: Our data challenge Chen et al.'s interpretation of smFRET results, i.e. the repetitive unfolding of G4 with one-base translocations. We believe that the observed oscillatory curve represents the alternate binding of DHX36 to the 3' and 5'G-tetrad of G4s, rather than the repetitive unfolding between the canonical and the transformed non-canonical G4s. Noteworthily, our results reported here also ca… ▽ More Our data challenge Chen et al.'s interpretation of smFRET results, i.e. the repetitive unfolding of G4 with one-base translocations. We believe that the observed oscillatory curve represents the alternate binding of DHX36 to the 3' and 5'G-tetrad of G4s, rather than the repetitive unfolding between the canonical and the transformed non-canonical G4s. Noteworthily, our results reported here also call into question the previously published smFRET data of helicase-mediated G4 unfolding. Therefore,discriminating the smFRET signal of repetitive binding from that of unfolding is very important to avoid misinterpreting smFRET results. △ Less

Submitted 14 June, 2021; originally announced June 2021.

Comments: 10 pages, 4 figures, 1 Table

Room temperature electrically pumped topological insulator lasers

Authors: Jae-Hyuck Choi, William E. Hayenga, Yuzhou G. N. Liu, Midya Parto, Babak Bahari, Demetrios N. Christodoulides, Mercedeh Khajavikhan

Abstract: Topological insulator lasers (TILs) are a recently introduced family of lasing arrays in which phase locking is achieved through synthetic gauge fields. These single frequency light source arrays operate in the spatially extended edge modes of topologically non-trivial optical lattices. Because of the inherent robustness of topological modes against perturbations and defects, such topological insu… ▽ More Topological insulator lasers (TILs) are a recently introduced family of lasing arrays in which phase locking is achieved through synthetic gauge fields. These single frequency light source arrays operate in the spatially extended edge modes of topologically non-trivial optical lattices. Because of the inherent robustness of topological modes against perturbations and defects, such topological insulator lasers tend to demonstrate higher slope efficiencies as compared to their topologically trivial counterparts. So far, magnetic and non-magnetic optically pumped topological laser arrays as well as electrically pumped TILs that are operating at cryogenic temperatures have been demonstrated. Here we present the first room temperature and electrically pumped topological insulator laser. This laser array, using a structure that mimics the quantum spin Hall effect for photons, generates light at telecom wavelengths and exhibits single frequency emission. Our work is expected to lead to further developments in laser science and technology, while opening up new possibilities in topological photonics. △ Less

Submitted 23 May, 2021; originally announced May 2021.

A light-driven three-dimensional plasmonic nanosystem that translates molecular motion into reversible chiroptical function

Authors: Anton Kuzyk, Yangyang Yang, Xiaoyang Duan, Simon Stoll, Alexander O. Govorov, Hiroshi Sugiyama, Masayuki Endo, Na Liu

Abstract: Nature has developed striking light-powered proteins such as bacteriorhodopsin, which can convert light energy into conformational changes for biological functions. Such natural machines are a great source of inspiration for creation of their synthetic analogues. However, synthetic molecular machines typically operate at the nanometre scale or below. Translating controlled operation of individual… ▽ More Nature has developed striking light-powered proteins such as bacteriorhodopsin, which can convert light energy into conformational changes for biological functions. Such natural machines are a great source of inspiration for creation of their synthetic analogues. However, synthetic molecular machines typically operate at the nanometre scale or below. Translating controlled operation of individual molecular machines to a larger dimension, for example, to 10-100 nm, which features many practical applications, is highly important but remains challenging. Here we demonstrate a light-driven plasmonic nanosystem that can amplify the molecular motion of azobenzene through the host nanostructure and consequently translate it into reversible chiroptical function with large amplitude modulation. Light is exploited as both energy source and information probe. Our plasmonic nanosystem bears unique features of optical addressability, reversibility and modulability, which are crucial for developing all-optical molecular devices with desired functionalities. △ Less

Submitted 14 May, 2021; originally announced May 2021.

Journal ref: Nature Communications 7, 10591 (2016)

Reconfigurable Plasmonic Chirality: Fundamentals and Applications

Authors: Frank Neubrech, Mario Hentschel, Na Liu

Abstract: Molecular chirality is a geometric property that is of great importance in chemistry, biology, and medicine. Recently, plasmonic nanostructures that exhibit distinct chiroptical responses have attracted tremendous interest, given their ability to emulate the properties of chiral molecules with tailored and pronounced optical characteristics. However, the optical chirality of such human-made struct… ▽ More Molecular chirality is a geometric property that is of great importance in chemistry, biology, and medicine. Recently, plasmonic nanostructures that exhibit distinct chiroptical responses have attracted tremendous interest, given their ability to emulate the properties of chiral molecules with tailored and pronounced optical characteristics. However, the optical chirality of such human-made structures is in general static and cannot be manipulated postfabrication. Herein, different concepts to reconfigure the chiroptical responses of plasmonic nano- and micro-objects are outlined. Depending on the utilized strategies and stimuli, the chiroptical signature, the 3D structural conformation, or both can be reconfigured. Optical devices based on plasmonic nanostructures with reconfigurable chirality possess great potential in practical applications, ranging from polarization conversion elements to enantioselective analysis, chiral sensing, and catalysis. △ Less

Submitted 14 May, 2021; originally announced May 2021.

Journal ref: Advanced Materials 32, 190564 (2020)

Electrically-controlled digital metasurface device for light projection displays

Authors: Jianxiong Li, Ping Yu, Shuang Zhang, Na Liu

Abstract: Light projection displays play an increasingly important role in our modern life. Core projection systems including liquid crystal displays and digital micromirror devices can impose spatial light modulation and actively shape light waves. Recently, the advent of metasurfaces has revolutionized design concepts in nanophotonics, enabling a new family of optical elements with exceptional degrees of… ▽ More Light projection displays play an increasingly important role in our modern life. Core projection systems including liquid crystal displays and digital micromirror devices can impose spatial light modulation and actively shape light waves. Recently, the advent of metasurfaces has revolutionized design concepts in nanophotonics, enabling a new family of optical elements with exceptional degrees of freedom. Here, we demonstrate a light projection display technology based on optical metasurfaces, called digital metasurface device (DMSD). Each metasurface pixel in a DMSD is electrically reconfigurable with well-controlled programmability and addressability. The DMSD can not only continuously modulate the intensity of light with high contrast, but also shape the wavefront of light generated by each metasurface pixel and dynamically switch between arbitrary holographic patterns. Our approach will pave an avenue towards the development of customized light projection devices. It will also drive the field of dynamic optical metasurfaces with fresh momentum and inspiring concepts. △ Less

Submitted 13 May, 2021; originally announced May 2021.

Journal ref: Nature Communications 11, Article number: 3574 (2020)

Dynamic Actuation of DNA-Assembled Plasmonic Nanostructures in Microfluidic Cell-Sized Compartments

Authors: Kerstin Goepfrich, Maximilian J. Urban, Christoph Frey, Ilia Platzman, Joachim P. Spatz, Na Liu

Abstract: Molecular motor proteins form the basis of cellular dynamics. Recently, notable efforts have led to the creation of their DNA-based mimics, which can carry out complex nanoscale motion. However, such functional analogues have not yet been integrated or operated inside synthetic cells toward the goal of realizing artificial biological systems entirely from the bottom-up. In this Letter, we encapsul… ▽ More Molecular motor proteins form the basis of cellular dynamics. Recently, notable efforts have led to the creation of their DNA-based mimics, which can carry out complex nanoscale motion. However, such functional analogues have not yet been integrated or operated inside synthetic cells toward the goal of realizing artificial biological systems entirely from the bottom-up. In this Letter, we encapsulate and actuate DNA-assembled dynamic nanostructures inside cell-sized microfluidic compartments. These encapsulated DNA nanostructures not only exhibit structural reconfigurability owing to their pH-sensitive molecular switches upon external stimuli but also possess optical feedback enabled by the integrated plasmonic probes. In particular, we demonstrate the power of microfluidic compartmentalization for achieving on-chip plasmonic enantiomer separation and substrate filtration. Our work exemplifies that the two unique tools, droplet-based microfluidics and DNA technology, offering high precision on the microscale and nanoscale, respectively, can be brought together to greatly enrich the complexity and diversity of functional synthetic systems. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Journal ref: Nano Lett. 20, 3, 1571-1577 (2020)

DNA nanotechnology for building artificial dynamic systems

Authors: Na Liu

Abstract: A fundamental design rule that nature has developed for biological machines is the intimate correlation between motion and function. One class of biological machines is molecular motors in living cells, which directly convert chemical energy into mechanical work. They coexist in every eukaryotic cell, but differ in their types of motion, the filaments they bind to, the cargos they carry, as well a… ▽ More A fundamental design rule that nature has developed for biological machines is the intimate correlation between motion and function. One class of biological machines is molecular motors in living cells, which directly convert chemical energy into mechanical work. They coexist in every eukaryotic cell, but differ in their types of motion, the filaments they bind to, the cargos they carry, as well as the work they perform. Such natural structures offer inspiration and blueprints for constructing DNA-assembled artificial systems, which mimic their functionality. In this article, we describe two groups of cytoskeletal motors, linear and rotary motors. We discuss how their artificial analogues can be built using DNA nanotechnology. Finally, we summarize ongoing research directions and conclude that DNA origami has a bright future ahead. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Journal ref: MRS Bulletin Vol. 44, Issue 7, 576 - 581 (2019)

Generation of Switchable Singular Beams with Dynamic Metasurfaces

Authors: Ping Yu, Jianxiong Li, Xin Li, Gisela Schuetz, Michael Hirscher, Shuang Zhang, Na Liu

Abstract: Singular beams have attracted great attention due to their optical properties and broad applications from light manipulation to optical communications. However, there has been a lack of practical schemes with which to achieve switchable singular beams with sub-wavelength resolution using ultrathin and flat optical devices. In this work, we demonstrate the generation of switchable vector and vortex… ▽ More Singular beams have attracted great attention due to their optical properties and broad applications from light manipulation to optical communications. However, there has been a lack of practical schemes with which to achieve switchable singular beams with sub-wavelength resolution using ultrathin and flat optical devices. In this work, we demonstrate the generation of switchable vector and vortex beams utilizing dynamic metasurfaces at visible frequencies. The dynamic functionality of the metasurface pixels is enabled by the utilization of magnesium nanorods, which possess plasmonic reconfigurability upon hydrogenation and dehydrogenation. We show that switchable vector beams of different polarization states and switchable vortex beams of different topological charges can be implemented through simple hydrogenation and dehydrogenation of the same metasurfaces. Furthermore, we demonstrate a two-cascade metasurface scheme for holographic pattern switching, taking inspiration from orbital angular momentum-shift keying. Our work provides an additional degree of freedom to develop high-security optical elements for anti-counterfeiting applications. △ Less

Submitted 30 April, 2021; originally announced May 2021.

Journal ref: ACS Nano 13, 6, 7100-7106 (2019)

A rotary plasmonic nanoclock

Authors: Ling Xin, Chao Zhou, Xiaoyang Duan, Na Liu

Abstract: One of the fundamental challenges in nanophotonics is to gain full control over nanoscale optical elements. The precise spatiotemporal arrangement determines their interactions and collective behavior. To this end, DNA nanotechnology is employed as an unprecedented tool to create nanophotonic devices with excellent spatial addressability and temporal programmability. However, most of the current D… ▽ More One of the fundamental challenges in nanophotonics is to gain full control over nanoscale optical elements. The precise spatiotemporal arrangement determines their interactions and collective behavior. To this end, DNA nanotechnology is employed as an unprecedented tool to create nanophotonic devices with excellent spatial addressability and temporal programmability. However, most of the current DNA-assembled nanophotonic devices can only reconfigure among random or very few defined states. Here, we demonstrate a DNA-assembled rotary plasmonic nanoclock. In this system, a rotor gold nanorod can carry out directional and reversible 360 degree rotation with respect to a stator gold nanorod, transitioning among 16 well-defined configurations powered by DNA fuels. The full-turn rotation process is monitored by optical spectroscopy in real time. We further demonstrate autonomous rotation of the plasmonic nanoclock powered by DNAzyme-RNA interactions. Such assembly approaches pave a viable route towards advanced nanophotonic systems entirely from the bottom-up. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Journal ref: Natur Communications 10, Article number: 5394 (2019)

DNA Nanotechnology Meets Nanophotonics

Authors: Na Liu

Abstract: In the past decades, DNA has been intensely studied and exploited in different research areas of nanoscience and nanotechnology. At first glance, DNA-based nanophotonics seems to deviate quite far from the original goal of Nadrian Seeman, the founder of DNA nanotechnology, who hoped to organize biological entities using DNA in high-resolution crystals. As a matter of fact, DNA-based nanophotonics… ▽ More In the past decades, DNA has been intensely studied and exploited in different research areas of nanoscience and nanotechnology. At first glance, DNA-based nanophotonics seems to deviate quite far from the original goal of Nadrian Seeman, the founder of DNA nanotechnology, who hoped to organize biological entities using DNA in high-resolution crystals. As a matter of fact, DNA-based nanophotonics does closely follow his central spirit. That is, apart from being a genetic material for inheritance, DNA is also an ideal material for building molecular devices. △ Less

Submitted 10 May, 2021; originally announced May 2021.

Comments: Viewpoint on DNA Nanotechnology Meets Nanophotonics

Journal ref: Nano Lett. 20 8430 (2020)