-
Room temperature operation of germanium-silicon single-photon avalanche diode
Authors:
Neil Na,
Yen-Cheng Lu,
Yu-Hsuan Liu,
Po-Wei Chen,
Ying-Chen Lai,
You-Ru Lin,
Chung-Chih Lin,
Tim Shia,
Chih-Hao Cheng,
Shu-Lu Chen
Abstract:
The ability to detect single photons has led to the advancement of numerous research fields. Although various types of single-photon detector have been developed, because of two main factors - that is, (1) the need for operating at cryogenic temperature and (2) the incompatibility with complementary metal-oxide-semiconductor (CMOS) fabrication processes - so far, to our knowledge, only Si-based si…
▽ More
The ability to detect single photons has led to the advancement of numerous research fields. Although various types of single-photon detector have been developed, because of two main factors - that is, (1) the need for operating at cryogenic temperature and (2) the incompatibility with complementary metal-oxide-semiconductor (CMOS) fabrication processes - so far, to our knowledge, only Si-based single-photon avalanche diode (SPAD) has gained mainstream success and has been used in consumer electronics. With the growing demand to shift the operation wavelength from near-infrared to short-wavelength infrared (SWIR) for better safety and performance, an alternative solution is required because Si has negligible optical absorption for wavelengths beyond 1 μm. Here we report a CMOS-compatible, high-performing germanium-silicon SPAD operated at room temperature, featuring a noise-equivalent power improvement over the previous Ge-based SPADs by 2-3.5 orders of magnitude. Key parameters such as dark count rate, single-photon detection probability at 1,310 nm, timing jitter, after-pulsing characteristic time and after-pulsing probability are, respectively, measured as 19 kHz μm^2, 12%, 188 ps, ~90 ns and <1%, with a low breakdown voltage of 10.26 V and a small excess bias of 0.75 V. Three-dimensional point-cloud images are captured with direct time-of-flight technique as proof of concept. This work paves the way towards using single-photon-sensitive SWIR sensors, imagers and photonic integrated circuits in everyday life.
△ Less
Submitted 14 July, 2024;
originally announced July 2024.
-
Supernova Pointing Capabilities of DUNE
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr…
▽ More
The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage.
△ Less
Submitted 14 July, 2024;
originally announced July 2024.
-
Physical encryption and decryption for secure data transmission in optical networks leveraging the temporal Talbot effect and microwave photonics
Authors:
Chulun Lin,
Taixia Shi,
Yiqing Liu,
Yang Chen
Abstract:
A novel microwave photonic scheme for secure data transmission in optical networks is proposed. The security of the scheme is guaranteed by physical encryption and decryption via the temporal Talbot effect in dispersive mediums. First, the original data is randomized in the digital domain by performing an exclusive OR operation using a random matrix. Subsequently, a time-varying multi-tone electri…
▽ More
A novel microwave photonic scheme for secure data transmission in optical networks is proposed. The security of the scheme is guaranteed by physical encryption and decryption via the temporal Talbot effect in dispersive mediums. First, the original data is randomized in the digital domain by performing an exclusive OR operation using a random matrix. Subsequently, a time-varying multi-tone electrical signal, which represents the randomized data matrix, is modulated onto an optical carrier. The optical signal after modulation is then phase-modulated by a temporal Talbot array illuminator (TAI) signal, and the optical signal after discrete quadratic phase modulation will lose its original appearance in the frequency domain and be further dispersed in the first dispersive medium. Due to the dispersion that does not match the TAI signal exactly, the waveform after the first dispersive medium is a noise-like signal. Hence, the physical encryption of the original data is successfully achieved. As the optical signal passes a second dispersive medium that makes the total dispersion match the TAI signal, the temporal waveform of the noise-like signal after photodetection is transformed into pulses. "1" and "0" in the randomized data matrix are represented through the presence and absence of pulses, and the physical decryption is achieved. By further processing the recovered data matrix using the random matrix, the original data can be recovered. The physical layer security of the proposed scheme and its fiber transmission capability are demonstrated. 8-Gbit/s data is transmitted, encrypted, and decrypted using two dispersive mediums and an optical fiber of 10 to 200 km, and error-free transmission is achieved. Many factors that affect the encryption, decryption, and transmission performance of the system have been analyzed.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
A microwave photonic prototype for concurrent radar detection and spectrum sensing over an 8 to 40 GHz bandwidth
Authors:
Taixia Shi,
Dingding Liang,
Lu Wang,
Lin Li,
Shaogang Guo,
Jiawei Gao,
Xiaowei Li,
Chulun Lin,
Lei Shi,
Baogang Ding,
Shiyang Liu,
Fangyi Yang,
Chi Jiang,
Yang Chen
Abstract:
In this work, a microwave photonic prototype for concurrent radar detection and spectrum sensing is proposed, designed, built, and investigated. A direct digital synthesizer and an analog electronic circuit are integrated to generate an intermediate frequency (IF) linearly frequency-modulated (LFM) signal with a tunable center frequency from 2.5 to 9.5 GHz and an instantaneous bandwidth of 1 GHz.…
▽ More
In this work, a microwave photonic prototype for concurrent radar detection and spectrum sensing is proposed, designed, built, and investigated. A direct digital synthesizer and an analog electronic circuit are integrated to generate an intermediate frequency (IF) linearly frequency-modulated (LFM) signal with a tunable center frequency from 2.5 to 9.5 GHz and an instantaneous bandwidth of 1 GHz. The IF LFM signal is converted to the optical domain via an intensity modulator and then filtered by a fiber Bragg grating (FBG) to generate only two 2nd-order optical LFM sidebands. In radar detection, the two optical LFM sidebands beat with each other to generate a frequency-and-bandwidth-quadrupled LFM signal, which is used for ranging, radial velocity measurement, and imaging. By changing the center frequency of the IF LFM signal, the radar function can be operated within 8 to 40 GHz. In spectrum sensing, one 2nd-order optical LFM sideband is selected by another FBG, which then works in conjunction with the stimulated Brillouin scattering gain spectrum to map the frequency of the signal under test to time with an instantaneous measurement bandwidth of 2 GHz. By using a frequency shift module to adjust the pump frequency, the frequency measurement range can be adjusted from 0 to 40 GHz. The prototype is comprehensively studied and tested, which is capable of achieving a range resolution of 3.75 cm, a range error of less than $\pm$ 2 cm, a radial velocity error within $\pm$ 1 cm/s, delivering clear imaging of multiple small targets, and maintaining a frequency measurement error of less than $\pm$ 7 MHz and a frequency resolution of better than 20 MHz.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Nonlinear photocurrent in quantum materials for broadband photodetection
Authors:
Yulin Shen,
Louis Primeau,
Jiangxu Li,
Tuan-Dung Nguyen,
David Mandrus,
Yuxuan Cosmi Lin,
Yang Zhang
Abstract:
Unlocking the vast potential of optical sensing technology has long been hindered by the challenges of achieving fast, sensitive, and broadband photodetection at ambient temperatures. In this review, we summarize recent progress in the study of nonlinear photocurrent in topological quantum materials, and its application in broadband photodetection without the use of p-n junction based semiconducto…
▽ More
Unlocking the vast potential of optical sensing technology has long been hindered by the challenges of achieving fast, sensitive, and broadband photodetection at ambient temperatures. In this review, we summarize recent progress in the study of nonlinear photocurrent in topological quantum materials, and its application in broadband photodetection without the use of p-n junction based semiconductor diodes. The intrinsic quadratic transverse current-input voltage relation is used to rectify the alternating electric field from incident radio, terahertz or infrared waves into a direct current, without a bias voltage and at zero magnetic field. We review novel photocurrents in several material systems, including topological Weyl semimetals, chiral crystals, ferroelectric materials, and low dimensional topological insulators. These quantum materials hold tremendous promise for broadband high-frequency rectification and photodetection, featuring substantial responsivity and detectivity.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Measures to mitigate the coherent beam-beam instability at CEPC
Authors:
Yuan Zhang,
Na Wang,
Chuntao Lin,
Kazuhito Ohmi,
Liwei Pan
Abstract:
Both horizontal and vertical coherent beam-beam instability are important issues at CEPC. The horizontal instability (X-Z instability) could be induced by beam-beam itself. In this paper we try to study the effect of chromaticity and resistive feedback by analysis and simulation. The vertical instability may be induced due to the combined effect of beam-beam interaction and vacuum impedance. Finit…
▽ More
Both horizontal and vertical coherent beam-beam instability are important issues at CEPC. The horizontal instability (X-Z instability) could be induced by beam-beam itself. In this paper we try to study the effect of chromaticity and resistive feedback by analysis and simulation. The vertical instability may be induced due to the combined effect of beam-beam interaction and vacuum impedance. Finite chromaticity and asymmetrical tunes have been proposed to suppress the vertical instability. Due to the further increase of impedance budget, we need to find more measures to mitigate the instability. The effect of resistive feedback and hourglass effect are evaluated by simulation.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Helium Detection in Technical Materials
Authors:
Andrew K. Gillespie,
Cuikun Lin,
Django Jones,
R. V. Duncan
Abstract:
Materials used to study nuclear fusion can retain atmospheric helium unless pretreated before an experiment. Understanding helium outgassing is important for accurate diagnostics in experiments surrounding nuclear fusion. The presence of helium is often cited as the primary evidence that a nuclear reaction has occurred, so it is imperative that known sources of helium are mitigated prior to procee…
▽ More
Materials used to study nuclear fusion can retain atmospheric helium unless pretreated before an experiment. Understanding helium outgassing is important for accurate diagnostics in experiments surrounding nuclear fusion. The presence of helium is often cited as the primary evidence that a nuclear reaction has occurred, so it is imperative that known sources of helium are mitigated prior to proceeding with novel nuclear experiments. It is also necessary to ensure hermiticity when transferring gas aliquots from an experiment to a mass spectrometer. In this article, we present studies of detecting helium leak rates in systems used in novel nuclear experiments. We also present studies of helium retention in materials subjected to various heating profiles and atmospheric concentrations. Without pretreatment, stainless-steel 316 retains between 15 $\unicode{x2013}$ 240 pmol of $^{ 4}$He or an areal outgassing amount of 0.07 $\unicode{x2013}$ 1.20 pmol/$cm^{ 2}$. It also may reabsorb $^{ 4}$He from the atmosphere in time. These studies also demonstrate that it is necessary to pretreat most materials prior to performing experiments where the presence of $^{ 4}$He is being used as an indicator for novel nuclear reactions.
△ Less
Submitted 25 March, 2024;
originally announced May 2024.
-
Interpretable Machine Learning Strategies for Accurate Prediction of Thermal Conductivity in Polymeric Systems
Authors:
Chunbo Lin,
Han Zheng
Abstract:
Polymers, integral to advancements in high-tech fields, necessitate the study of their thermal conductivity (TC) to enhance material attributes and energy efficiency. The TC of polymers obtained by molecular dynamics (MD) calculations and experimental measurements is slow, and it is difficult to screen polymers with specific TC in a wide range. Existing machine learning (ML) techniques for determi…
▽ More
Polymers, integral to advancements in high-tech fields, necessitate the study of their thermal conductivity (TC) to enhance material attributes and energy efficiency. The TC of polymers obtained by molecular dynamics (MD) calculations and experimental measurements is slow, and it is difficult to screen polymers with specific TC in a wide range. Existing machine learning (ML) techniques for determining polymer TC suffer from the problems of too large feature space and cannot guarantee very high accuracy. In this work, we leverage TCs from accessible datasets to decode the Simplified Molecular Input Line Entry System (SMILES) of polymers into ten features of distinct physical significance. A novel evaluation model for polymer TC is formulated, employing four ML strategies. The Gradient Boosting Decision Tree (GBDT)-based model, a focal point of our design, achieved a prediction accuracy of R$^2$=0.88 on a dataset containing 400 polymers. Furthermore, we used an interpretable ML approach to discover the significant contribution of quantitative estimate of drug-likeness and number of rotatable bonds features to TC, and analyzed the physical mechanisms involved. The ML method we developed provides a new idea for physical modeling of polymers, which is expected to be generalized and applied widely in constructing polymers with specific TCs and predicting all other properties of polymers.
△ Less
Submitted 1 April, 2024; v1 submitted 29 March, 2024;
originally announced March 2024.
-
Bridging scales in multiscale bubble growth dynamics with correlated fluctuations using neural operator learning
Authors:
Minglei Lu,
Chensen Lin,
Martian Maxey,
George Karniadakis,
Zhen Li
Abstract:
The intricate process of bubble growth dynamics involves a broad spectrum of physical phenomena from microscale mechanics of bubble formation to macroscale interplay between bubbles and surrounding thermo-hydrodynamics. Traditional bubble dynamics models including atomistic approaches and continuum-based methods segment the bubble dynamics into distinct scale-specific models. In order to bridge th…
▽ More
The intricate process of bubble growth dynamics involves a broad spectrum of physical phenomena from microscale mechanics of bubble formation to macroscale interplay between bubbles and surrounding thermo-hydrodynamics. Traditional bubble dynamics models including atomistic approaches and continuum-based methods segment the bubble dynamics into distinct scale-specific models. In order to bridge the gap between microscale stochastic fluid models and continuum-based fluid models for bubble dynamics, we develop a composite neural operator model to unify the analysis of nonlinear bubble dynamics across microscale and macroscale regimes by integrating a many-body dissipative particle dynamics (mDPD) model with a continuum-based Rayleigh-Plesset (RP) model through a novel neural network architecture, which consists of a deep operator network for learning the mean behavior of bubble growth subject to pressure variations and a long short-term memory network for learning the statistical features of correlated fluctuations in microscale bubble dynamics. Training and testing data are generated by conducting mDPD and RP simulations for nonlinear bubble dynamics with initial bubble radii ranging from 0.1 to 1.5 micrometers. Results show that the trained composite neural operator model can accurately predict bubble dynamics across scales, with a 99% accuracy for the time evaluation of the bubble radius under varying external pressure while containing correct size-dependent stochastic fluctuations in microscale bubble growth dynamics. The composite neural operator is the first deep learning surrogate for multiscale bubble growth dynamics that can capture correct stochastic fluctuations in microscopic fluid phenomena, which sets a new direction for future research in multiscale fluid dynamics modeling.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Ultra-short lifetime isomer studies from photonuclear reactions using laser-driven ultra-intense γ-ray
Authors:
Di Wu,
Haoyang Lan,
Jiaxing Liu,
Huangang Lu,
Jianyao Zhang,
Jianfeng Lv,
Xuezhi Wu,
Hui Zhang,
Yadong Xia,
Qiangyou He,
Jie Cai,
Qianyi Ma,
Yuhui Xia,
Zhenan Wang,
Meizhi Wang,
Zhiyan Yang,
Xinlu Xu,
Yixing Geng,
Chen Lin,
Wenjun Ma,
Yanying Zhao,
Haoran Wang,
Fulong Liu,
Chuangye He,
Jinqing Yu
, et al. (7 additional authors not shown)
Abstract:
Isomers, ubiquitous populations of relatively long-lived nuclear excited states, play a crucial role in nuclear physics. However, isomers with half-life times of several seconds or less barely had experimental cross section data due to the lack of a suitable measuring method. We report a method of online γ spectroscopy for ultra-short-lived isomers from photonuclear reactions using laser-driven ul…
▽ More
Isomers, ubiquitous populations of relatively long-lived nuclear excited states, play a crucial role in nuclear physics. However, isomers with half-life times of several seconds or less barely had experimental cross section data due to the lack of a suitable measuring method. We report a method of online γ spectroscopy for ultra-short-lived isomers from photonuclear reactions using laser-driven ultra-intense γ-rays. The fastest time resolution can reach sub-ps level with γ-ray intensities >10^{19}/s ({\geqslant} 8 MeV). The ^{115}In(γ, n)^{114m2}In reaction (T_{1/2} = 43.1 ms) was first measured in the high-energy region which shed light on the nuclear structure studies of In element. Simulations showed it would be an efficient way to study ^{229m}Th (T_{1/2} = 7 μs), which is believed to be the next generation of nuclear clock. This work offered a unique way of gaining insight into ultra-short lifetimes and promised an effective way to fill the gap in relevant experimental data.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Self-consistent Validation for Machine Learning Electronic Structure
Authors:
Gengyuan Hu,
Gengchen Wei,
Zekun Lou,
Philip H. S. Torr,
Wanli Ouyang,
Han-sen Zhong,
Chen Lin
Abstract:
Machine learning has emerged as a significant approach to efficiently tackle electronic structure problems. Despite its potential, there is less guarantee for the model to generalize to unseen data that hinders its application in real-world scenarios. To address this issue, a technique has been proposed to estimate the accuracy of the predictions. This method integrates machine learning with self-…
▽ More
Machine learning has emerged as a significant approach to efficiently tackle electronic structure problems. Despite its potential, there is less guarantee for the model to generalize to unseen data that hinders its application in real-world scenarios. To address this issue, a technique has been proposed to estimate the accuracy of the predictions. This method integrates machine learning with self-consistent field methods to achieve both low validation cost and interpret-ability. This, in turn, enables exploration of the model's ability with active learning and instills confidence in its integration into real-world studies.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar Es-sghir,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1300 additional authors not shown)
Abstract:
Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN…
▽ More
Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen.
△ Less
Submitted 9 February, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Simulation and Experimental Analysis of Aerogel Attenuation for High Energy Alpha Particles in Fission Fusion Fragment Rocket Applications
Authors:
Sandeep Puri,
Andrew Gillespie,
Ian Jones,
Cuikun Lin,
Ryan Weed,
Robert V. Duncan
Abstract:
Emerging studies are geared toward exploring new methods of nuclear rocket propulsion to provide more efficient space transit beyond Earth's orbit. One method is to employ a Fission Fragment Rocket Engine utilizing fissionable layers embedded in a low-density aerogel. A quantitative understanding of particle attenuation is essential for developing a functional prototype that permits fission fragme…
▽ More
Emerging studies are geared toward exploring new methods of nuclear rocket propulsion to provide more efficient space transit beyond Earth's orbit. One method is to employ a Fission Fragment Rocket Engine utilizing fissionable layers embedded in a low-density aerogel. A quantitative understanding of particle attenuation is essential for developing a functional prototype that permits fission fragments to escape the layers and contribute to specific impulse rather than being attenuated and generating waste heat. In this investigation, the MCNP code was used to theoretically analyze the attenuation of alpha particles from Am-241 sources within aerogel materials. Simulations were conducted on aerogels with various densities and compositions. These simulations aimed to predict the expected intensity of alpha particles reaching a detector. CR-39 was employed as a Plastic Nuclear Track Detector to assess particle attenuation by the aerogels. The threshold areal density of atoms was found to be around $10^{ 20}$ atoms/$cm^{ 2}$ for the three materials studied in this project. Using a 0.22 mm thick SiO$_2$ aerogel with a density of 90 mg/$cm^{ 3}$, which exceeds the threshold, nearly all alpha particles were attenuated. Conversely, employing a 1.6 mm thick graphene aerogel with a density of 12.5 mg/$cm^{ 3}$ resulted in an average attenuation of 32.3%.
△ Less
Submitted 28 May, 2024; v1 submitted 31 January, 2024;
originally announced February 2024.
-
Validation of Classical Transport Cross Section for Ion-Ion Interactions Under Repulsive Yukawa Potential
Authors:
Tian-Xing Hu,
Dong Wu,
C. L. Lin,
Z. M. Sheng,
B. He,
J. Zhang
Abstract:
Value of cross section is a fundamental parameter to depict the transport of charged particles in matters. Due to masses of orders of magnitude higher than electrons and convenience of realistic calculation, the cross section of elastic nuclei-nuclei collision is usually treated via classical mechanics. The famous Bohr criterion was firstly proposed to judge whether the treatment via classical mec…
▽ More
Value of cross section is a fundamental parameter to depict the transport of charged particles in matters. Due to masses of orders of magnitude higher than electrons and convenience of realistic calculation, the cross section of elastic nuclei-nuclei collision is usually treated via classical mechanics. The famous Bohr criterion was firstly proposed to judge whether the treatment via classical mechanics is reliable or not. Later, Lindhard generalized the results of Coulomb to screening potentials. Considering the increasing importance of detailed ion-ion interactions under modern simulation codes in inertial confinement fusion (ICF) researches, the validation of classical transport cross section for ion-ion interactions in a big range of parameter space is certainly required. In this work, the transport cross sections via classical mechanics under repulsive Yukawa potential are compared with those via quantum mechanics. Differences of differential cross sections are found with respect to scattering angles and velocities. Our results generally indicate that the classical picture fails at the cases of both low and high velocities, which represent a significant extension of the famous Bohr criterion and its generalized variations. Furthermore, the precise validation zones of classical picture is also analysed in this work. This work is of significant importance for benchmarking the modern ion-kinetic simulation codes in ICF researches, concerning the stopping power of $α$ particles in DT fuels, ion-ion friction and viscous effects in the formation of kinetic shocks.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Acoustics-based Active Control of Unsteady Flow Dynamics using Reinforcement Learning Driven Synthetic Jets
Authors:
Khai Phan,
Siddharth Rout,
Chao-An Lin,
Rajeev Jaiman
Abstract:
Noise generated by vortices is a sensible measure of the strength of wakes generated in a flow field. This paper presents an innovative approach to actively control wakes and noise generated in a flow past a cylinder using deep reinforcement learning (DRL) as a continuously learning active control algorithm with noise levels recorded using acoustic level around the wake region. The two primary obj…
▽ More
Noise generated by vortices is a sensible measure of the strength of wakes generated in a flow field. This paper presents an innovative approach to actively control wakes and noise generated in a flow past a cylinder using deep reinforcement learning (DRL) as a continuously learning active control algorithm with noise levels recorded using acoustic level around the wake region. The two primary objectives of this study is to investigate the feasibility and effectiveness of use of acoustic level as controlling parameter and employing DRL algorithms to optimize the control of flow dynamics. A hydrophone array is utilised to capture the wake pattern along the flow field downstream of a circular cylinder in the form of acoustic signals. The collected data are used to create a real-time feedback loop for a DRL agent to adjust jet actuators strategically placed on the cylinder's surface. This approach enables the agent to learn and adapt its control strategy based on the observed acoustic feedback, resulting in a closed-loop control system. We demonstrate that the DRL-based flow control strategy can effectively reduce wake amplitude and the noise generated. The noise level reduces by an appreciable 6.9\% and 9.5\% in the given setting for two control configurations. Similarly, the drag coefficient reduces by a remarkable 15.9\% and 23.8\% respectively. Specifically, it reduces the oscillation amplitude in drag and noise. The proposed method offers promising results in terms of reducing flow-induced vibration. The paper highlights the potential for using DRL, jets, and hydrophone arrays in active flow control, opening new avenues for optimizing flow control in practical engineering applications.
△ Less
Submitted 26 December, 2023;
originally announced December 2023.
-
FuXi-S2S: A machine learning model that outperforms conventional global subseasonal forecast models
Authors:
Lei Chen,
Xiaohui Zhong,
Hao Li,
Jie Wu,
Bo Lu,
Deliang Chen,
Shangping Xie,
Qingchen Chao,
Chensen Lin,
Zixin Hu,
Yuan Qi
Abstract:
Skillful subseasonal forecasts are crucial for various sectors of society but pose a grand scientific challenge. Recently, machine learning based weather forecasting models outperform the most successful numerical weather predictions generated by the European Centre for Medium-Range Weather Forecasts (ECMWF), but have not yet surpassed conventional models at subseasonal timescales. This paper intr…
▽ More
Skillful subseasonal forecasts are crucial for various sectors of society but pose a grand scientific challenge. Recently, machine learning based weather forecasting models outperform the most successful numerical weather predictions generated by the European Centre for Medium-Range Weather Forecasts (ECMWF), but have not yet surpassed conventional models at subseasonal timescales. This paper introduces FuXi Subseasonal-to-Seasonal (FuXi-S2S), a machine learning model that provides global daily mean forecasts up to 42 days, encompassing five upper-air atmospheric variables at 13 pressure levels and 11 surface variables. FuXi-S2S, trained on 72 years of daily statistics from ECMWF ERA5 reanalysis data, outperforms the ECMWF's state-of-the-art Subseasonal-to-Seasonal model in ensemble mean and ensemble forecasts for total precipitation and outgoing longwave radiation, notably enhancing global precipitation forecast. The improved performance of FuXi-S2S can be primarily attributed to its superior capability to capture forecast uncertainty and accurately predict the Madden-Julian Oscillation (MJO), extending the skillful MJO prediction from 30 days to 36 days. Moreover, FuXi-S2S not only captures realistic teleconnections associated with the MJO, but also emerges as a valuable tool for discovering precursor signals, offering researchers insights and potentially establishing a new paradigm in Earth system science research.
△ Less
Submitted 5 July, 2024; v1 submitted 15 December, 2023;
originally announced December 2023.
-
The DUNE Far Detector Vertical Drift Technology, Technical Design Report
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1304 additional authors not shown)
Abstract:
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi…
▽ More
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model.
The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise.
In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered.
This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Spin-Orbital Coupling in All-Inorganic Metal-Halide Perovskites: the Hidden Force that Matters
Authors:
Pradeep Raja Anandan,
Muhammad Nadeem,
Chun-Ho Lin,
Simrjit Singh,
Xinwei Guan,
Jiyun Kim,
Shamim Shahroki,
Md Zahidur Rahaman,
Xun Geng,
Jing-Kai Huang,
Hien Nguyen,
Hanlin Hu,
Pankaj Sharma,
Jan Seidel,
Xiaolin Wang,
Tom Wu
Abstract:
Highlighted with improved long-term thermal and environmental stability, all-inorganic metal halide perovskites exhibit tunable physical properties, cost-effective synthesis, and satisfactory optoelectronic performance, attracting increasing research interests worldwide. However, a less explored feature of these materials is their strong spin-orbit coupling (SOC), which is the hidden force influen…
▽ More
Highlighted with improved long-term thermal and environmental stability, all-inorganic metal halide perovskites exhibit tunable physical properties, cost-effective synthesis, and satisfactory optoelectronic performance, attracting increasing research interests worldwide. However, a less explored feature of these materials is their strong spin-orbit coupling (SOC), which is the hidden force influencing not only band structure but also properties including magnetoresistance, spin lifetime and singlet-triplet splitting. This review provides an overview of the fundamental aspects and the latest progress of the SOC and debate regarding Rashba effects in all-inorganic metal halide perovskites, providing critical insights into the physical phenomena and potential applications. Meanwhile, crystal structures and photophysics of all-inorganic perovskite are discussed in the context of SOC, along with the related experimental and characterization techniques. Furthermore, a recent understanding of the band topology in the all-inorganic halide perovskites is introduced to push the boundary even further for the novel applications of all-inorganic halide perovskites. Finally, an outlook is given on the potential directions of breakthroughs via leveraging the SOC in halide perovskites.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
FuXi-Extreme: Improving extreme rainfall and wind forecasts with diffusion model
Authors:
Xiaohui Zhong,
Lei Chen,
Jun Liu,
Chensen Lin,
Yuan Qi,
Hao Li
Abstract:
Significant advancements in the development of machine learning (ML) models for weather forecasting have produced remarkable results. State-of-the-art ML-based weather forecast models, such as FuXi, have demonstrated superior statistical forecast performance in comparison to the high-resolution forecasts (HRES) of the European Centre for Medium-Range Weather Forecasts (ECMWF). However, ML models f…
▽ More
Significant advancements in the development of machine learning (ML) models for weather forecasting have produced remarkable results. State-of-the-art ML-based weather forecast models, such as FuXi, have demonstrated superior statistical forecast performance in comparison to the high-resolution forecasts (HRES) of the European Centre for Medium-Range Weather Forecasts (ECMWF). However, ML models face a common challenge: as forecast lead times increase, they tend to generate increasingly smooth predictions, leading to an underestimation of the intensity of extreme weather events. To address this challenge, we developed the FuXi-Extreme model, which employs a denoising diffusion probabilistic model (DDPM) to restore finer-scale details in the surface forecast data generated by the FuXi model in 5-day forecasts. An evaluation of extreme total precipitation ($\textrm{TP}$), 10-meter wind speed ($\textrm{WS10}$), and 2-meter temperature ($\textrm{T2M}$) illustrates the superior performance of FuXi-Extreme over both FuXi and HRES. Moreover, when evaluating tropical cyclone (TC) forecasts based on International Best Track Archive for Climate Stewardship (IBTrACS) dataset, both FuXi and FuXi-Extreme shows superior performance in TC track forecasts compared to HRES, but they show inferior performance in TC intensity forecasts in comparison to HRES.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Simulating Radiation Shielding Effectiveness Against Three Neutron Sources
Authors:
Andrew K. Gillespie,
Cuikun Lin,
Matthew Looney,
R. V. Duncan
Abstract:
Laboratories and Universities regularly apply for approval from the United States Nuclear Regulatory Commission (NRC) to use neutron generators for experimental research. To comply with the regulations set by the NRC, adequate shielding is necessary to ensure that the radiation dose rates experienced by an operator, and outside the walls of any containment buildings, are below the prescribed level…
▽ More
Laboratories and Universities regularly apply for approval from the United States Nuclear Regulatory Commission (NRC) to use neutron generators for experimental research. To comply with the regulations set by the NRC, adequate shielding is necessary to ensure that the radiation dose rates experienced by an operator, and outside the walls of any containment buildings, are below the prescribed levels. Typically, the neutron source needs to be shielded such that the radiation dose rate experienced by any user is less than 0.25 mRem/hr (500mrem/2000-hour work-year). To address this requirement, we investigate the effectiveness of boronated concrete, boronated water, and light water shielding materials and their applicability to three neutron sources. We present our findings on the radiation shielding design and calculations for three neutron sources situated inside shielding layers. Our modeling utilized the Monte Carlo n-Particle transport codes (MCNP6.2) to simulate neutron attenuation of the shielding. The simulation results reveal that a light water shielding can sufficiently reduce the dose rate for an individual located as close as two meters from the source. Therefore, this shield design can effectively decrease the radiation dose below the maximum recommended limit.
△ Less
Submitted 31 January, 2024; v1 submitted 19 September, 2023;
originally announced September 2023.
-
All-electrical detection of the spin-charge conversion in nanodevices based on SrTiO3 two-dimensional electron gases
Authors:
Fernando Gallego,
Felix Trier,
Srijani Mallik,
Julien Bréhin,
Sara Varotto,
Luis Moreno Vicente-Arche,
Tanay Gosavy,
Chia-Ching Lin,
Jean-René Coudevylle,
Lucía Iglesias,
Félix Casanova,
Ian Young,
Laurent Vila,
Jean-Philippe Attané,
Manuel Bibes
Abstract:
The Magnetoelectric Spin-Orbit (MESO) technology aims to bring logic into memory by combining a ferromagnet with a magnetoelectric (ME) element for information writing, and a spin-orbit (SO) element for information read-out through spin-charge conversion. Among candidate SO materials to achieve a large MESO output signal, oxide Rashba two-dimensional electron gases (2DEGs) have shown very large sp…
▽ More
The Magnetoelectric Spin-Orbit (MESO) technology aims to bring logic into memory by combining a ferromagnet with a magnetoelectric (ME) element for information writing, and a spin-orbit (SO) element for information read-out through spin-charge conversion. Among candidate SO materials to achieve a large MESO output signal, oxide Rashba two-dimensional electron gases (2DEGs) have shown very large spin-charge conversion efficiencies, albeit mostly in spin-pumping experiments. Here, we report all-electrical spin-injection and spin-charge conversion experiments in nanoscale devices harnessing the inverse Edelstein effect of SrTiO3 2DEGs. We have designed, patterned and fabricated nanodevices in which a spin current injected from a cobalt layer into the 2DEG is converted into a charge current. We optimized the spin-charge conversion signal by applying back-gate voltages, and studied its temperature evolution. We further disentangled the inverse Edelstein contribution from spurious effects such as the planar Hall effect, the anomalous Hall effect or the anisotropic magnetoresistance. The combination of non-volatility and high energy efficiency of these devices could potentially lead to new technology paradigms for beyond-CMOS computing architectures.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Suppression of Neutron Background using Deep Neural Network and Fourier Frequency Analysis at the KOTO Experiment
Authors:
Y. -C. Tung,
J. Li,
Y. B. Hsiung,
C. Lin,
H. Nanjo,
T. Nomura,
J. C. Redeker,
N. Shimizu,
S. Shinohara,
K. Shiomi,
Y. W. Wah,
T. Yamanaka
Abstract:
We present two analysis techniques for distinguishing background events induced by neutrons from photon signal events in the search for the rare $K^0_L\rightarrowπ^0ν\barν$ decay at the J-PARC KOTO experiment. These techniques employed a deep convolutional neural network and Fourier frequency analysis to discriminate neutrons from photons, based on their variations in cluster shape and pulse shape…
▽ More
We present two analysis techniques for distinguishing background events induced by neutrons from photon signal events in the search for the rare $K^0_L\rightarrowπ^0ν\barν$ decay at the J-PARC KOTO experiment. These techniques employed a deep convolutional neural network and Fourier frequency analysis to discriminate neutrons from photons, based on their variations in cluster shape and pulse shape, in the electromagnetic calorimeter made of undoped CsI. The results effectively suppressed the neutron background by a factor of $5.6\times10^5$, while maintaining the efficiency of $K^0_L\rightarrowπ^0ν\barν$ at $70\%$.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Gravitational waves from high-power twisted light
Authors:
Eduard Atonga,
Killian Martineau,
Ramy Aboushelbaya,
Aurélien Barrau,
Marko von der Leyen,
Sunny Howard,
Abigail James,
Jordan Lee,
Chunshan Lin,
Heath Martin,
Iustin Ouatu,
Robert Paddock,
Rusko Ruskov,
Robin Timmis,
Peter Norreys
Abstract:
Recent advances in high-energy and high-peak-power laser systems have opened up new possibilities for fundamental physics research. In this work, the potential of twisted light for the generation of gravitational waves in the high frequency regime is explored for the first time. Focusing on Bessel beams, novel analytic expressions and numerical computations for the generated metric perturbations a…
▽ More
Recent advances in high-energy and high-peak-power laser systems have opened up new possibilities for fundamental physics research. In this work, the potential of twisted light for the generation of gravitational waves in the high frequency regime is explored for the first time. Focusing on Bessel beams, novel analytic expressions and numerical computations for the generated metric perturbations and associated powers are presented. Compelling evidence is provided that the properties of the generated gravitational waves, such as frequency, polarisation states and direction of emission, are controllable by the laser pulse parameters and optical arrangements.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Extension of all-optical reconstruction method for isolated attosecond pulses using high-harmonic generation streaking spectra
Authors:
Kan Wang,
Yong Fu,
Baochang Li,
Xiangyu Tang,
Zhong Guan,
Bincheng Wang,
C. D. Lin,
Cheng Jin
Abstract:
An all-optical method for directly reconstructing the spectral phase of isolated attosecond pulse (IAP) has been proposed recently [New J. Phys. 25, 083003 (2023)]. This method is based on the high-harmonic generation (HHG) streaking spectra generated by an IAP and a time-delayed intense infrared (IR) laser, which can be accurately simulated by an extended quantitative rescattering model. Here we…
▽ More
An all-optical method for directly reconstructing the spectral phase of isolated attosecond pulse (IAP) has been proposed recently [New J. Phys. 25, 083003 (2023)]. This method is based on the high-harmonic generation (HHG) streaking spectra generated by an IAP and a time-delayed intense infrared (IR) laser, which can be accurately simulated by an extended quantitative rescattering model. Here we extend the retrieval algorithm in this method to successfully retrieve the spectral phase of an shaped IAP, which has a spectral minimum, a phase jump about $π$, and a "split" temporal profile. We then reconstruct the carrier-envelope phase of IR laser from HHG streaking spectra. And we finally discuss the retrieval of the phase of high harmonics by the intense IR laser alone using the Fourier transform of HHG streaking spectra.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
Superior visible photoelectric response with Au/Cu2NiSnS4 core-shell nanocrystals
Authors:
Anima Ghosh,
Shyam Narayan Singh Yadav,
Ming-Hsiu Tsai,
Abhishek Dubey,
Shangjr Gwo,
Chih-Ting Lin,
Ta- Jen Yen
Abstract:
The incorporation of plasmonic metal nanostructures into semiconducting chalcogenides, in the form of core-shell structures, represents a promising approach to boosting the performance of photodetectors. In this study, we combined Au nanoparticles with newly developed copper-based chalcogenides Cu2NiSnS4 (Au/CNTS), to achieve an ultrahigh optoelectronic response in the visible regime. The high-qua…
▽ More
The incorporation of plasmonic metal nanostructures into semiconducting chalcogenides, in the form of core-shell structures, represents a promising approach to boosting the performance of photodetectors. In this study, we combined Au nanoparticles with newly developed copper-based chalcogenides Cu2NiSnS4 (Au/CNTS), to achieve an ultrahigh optoelectronic response in the visible regime. The high-quality Au/CNTS core-shell structure was synthesized by developing a unique colloidal hot-injection method, which allowed excellent control over sizes, shapes, and elemental compositions. The fabricated Au/CNTS hybrid core-shell structure exhibited enhanced optical absorption, carrier extraction efficiency, and improved photo-sensing performance, owing to the plasmonic-induced resonance energy transfer effect of the Au core. This effect led to a significant increase in carrier density between the Au core and CNTS shell. These values outperformed a CNTS-based gate-free visible photodetector.
△ Less
Submitted 29 August, 2023; v1 submitted 6 August, 2023;
originally announced August 2023.
-
Photoneutron Yield for an Electron Beam on Tantalum and Erbium Deuteride
Authors:
Andrew K. Gillespie,
Cuikun Lin,
R. V. Duncan
Abstract:
An electron beam may be used to generate bremsstrahlung photons that go on to create photoneutrons within metals. This serves as a low-energy neutron source for irradiation experiments [1-3]. In this article, we present simulation results for optimizing photoneutron yield for a 10-MeV electron beam on tantalum foil and erbium deuteride (ErD$_3$). The thickness of the metal layers was varied. A tan…
▽ More
An electron beam may be used to generate bremsstrahlung photons that go on to create photoneutrons within metals. This serves as a low-energy neutron source for irradiation experiments [1-3]. In this article, we present simulation results for optimizing photoneutron yield for a 10-MeV electron beam on tantalum foil and erbium deuteride (ErD$_3$). The thickness of the metal layers was varied. A tantalum foil thickness of 1.5 mm resulted in the most photons reaching the second metal layer. When a second metal layer of ErD$_3$ was included, the photoneutron yield increased with the thickness of the secondary layer. When the electron beam was directly incident upon a layer of ErD$_3$, the photoneutron yield did not differ significantly from the yield when a layer of tantalum was included. The directional photoneutron yield reached a maximum level when the thickness of the ErD$_3$ layer was around 12 cm. About 1 neutron was generated per $10^4$ source electrons. When using a 2-mA beam current, it is possible to generate up to $10^{ 12}$ neutrons per second, making this combination a relatively-inexpensive neutron generator.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
The Fission Fragment Rocket Engine for Mars Fast Transit
Authors:
John Gahl,
Andrew K. Gillespie,
Cuikun Lin,
R. V. Duncan
Abstract:
In this paper we discuss the advantages and challenges of utilizing Fission Fragment Rocket Engines (FFREs) to dramatically reduce transit time in space travel, for example, traveling to Mars. We discuss methods to decrease the size and weight of FFREs. These include utilizing metallic deuterides as moderators, driving the engines with electron beam bremsstrahlung, and operating the FFREs as subcr…
▽ More
In this paper we discuss the advantages and challenges of utilizing Fission Fragment Rocket Engines (FFREs) to dramatically reduce transit time in space travel, for example, traveling to Mars. We discuss methods to decrease the size and weight of FFREs. These include utilizing metallic deuterides as moderators, driving the engines with electron beam bremsstrahlung, and operating the FFREs as subcritical assemblies, not as nuclear reactors. We discuss these and other new innovations based upon improved materials and technology that may be integrated into a revolutionary nuclear rocket technology.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Prospects For A New Light Nuclei, Fission Fusion Energy Cycle
Authors:
R. V. Duncan,
Cuikun Lin,
Andrew K. Gillespie,
John Gahl
Abstract:
Future advanced nuclear rocket propulsion, and the availability of new nuclear power cycle designs, will benefit substantially from the large current investment in alternative nuclear energy that is underway today. We propose a new nuclear cycle which includes the primary fission of lithium-6, followed by secondary fusion of deuterium and tritium, and a secondary fission of lithium-7 by tritium. T…
▽ More
Future advanced nuclear rocket propulsion, and the availability of new nuclear power cycle designs, will benefit substantially from the large current investment in alternative nuclear energy that is underway today. We propose a new nuclear cycle which includes the primary fission of lithium-6, followed by secondary fusion of deuterium and tritium, and a secondary fission of lithium-7 by tritium. This cycle does not produce nuclear waste from its nuclear fuel, since all byproducts of these cascade reactions are stable, provided that the triton production during the primary reaction is fully consumed in the secondary reactions. This cycle may, however, activate surrounding technical materials from its neutron flux. This light-element nuclear fuel is readily obtained through the ongoing expansion of the lithium mining industry and electric vehicle (EV) battery recycling industries.
△ Less
Submitted 22 March, 2024; v1 submitted 2 August, 2023;
originally announced August 2023.
-
Quantifying Robustness of Attosecond Transient Absorption Spectroscopy for Vibronic Coherence in Charge Migration
Authors:
C. H. Yuen,
C. D. Lin
Abstract:
Probing vibronic coherence in molecules has been a central topic in ultrafast science, as it is an essential prerequisite to monitoring electronic motion. While experiments have demonstrated that attosecond transient absorption spectroscopy (ATAS) can probe the vibronic coherence in a few molecules, its robustness remains largely unexplored. In this Letter, we develop a comprehensive theory for AT…
▽ More
Probing vibronic coherence in molecules has been a central topic in ultrafast science, as it is an essential prerequisite to monitoring electronic motion. While experiments have demonstrated that attosecond transient absorption spectroscopy (ATAS) can probe the vibronic coherence in a few molecules, its robustness remains largely unexplored. In this Letter, we develop a comprehensive theory for ATAS which accounts for the orientation dependence of the density matrix of a pumped molecule. We apply our theory to N$_2^+$ formed by multiorbital tunnel ionization under a few-cycle intense near-infrared laser pulse. The simulated x-ray absorption spectrum shows clear signatures of the vibronic coherence between the $A^2Π_u$ and $B^2Σ_u^+$ states of N$_2^+$, which was predicted to be absent by a previous theory. We further define a coherence contrast factor to quantify the robustness of ATAS. This work advances the theoretical foundation of ATAS and paves the way for monitoring electronic motion in generic molecules.
△ Less
Submitted 31 July, 2023; v1 submitted 25 July, 2023;
originally announced July 2023.
-
Coherence from multiorbital tunneling ionization of molecules
Authors:
C. H. Yuen,
C. D. Lin
Abstract:
We present a simple and general coherence model for multiorbital tunnel ionization of molecules, which we incorporate into our previously developed density matrix approach for sequential double ionization [Yuen and Lin, Phys. Rev. A 106, 023120 (2022)]. The influence of this coherence is investigated through simulations of single ionization and sequential double ionization of N$_2$ and O$_2$ using…
▽ More
We present a simple and general coherence model for multiorbital tunnel ionization of molecules, which we incorporate into our previously developed density matrix approach for sequential double ionization [Yuen and Lin, Phys. Rev. A 106, 023120 (2022)]. The influence of this coherence is investigated through simulations of single ionization and sequential double ionization of N$_2$ and O$_2$ using few-cycle near-infrared laser pulses. In the case of single ionization, our results reveal the crucial role played by this coherence in generating population inversion in N$_2^+$, suggesting a potential mechanism for air lasing. Regarding sequential double ionization, we observe only minor changes in the kinetic energy release spectra when the coherence is included, while noticeable differences in the angle-dependent dication yield for both N$_2$ and O$_2$ are found. Based on these findings, we recommend the inclusion of multiorbital tunnel ionization coherence in models for single ionization of general molecules, while suggesting that it can be safely neglected in the case of sequential double ionization.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
A Realistic Coaxial Feed for Cascaded Cylindrical Metasurfaces
Authors:
Chun-Wen Lin,
Anthony Grbic
Abstract:
In this letter, a realistic coaxial feed is integrated into the design of cascaded cylindrical metasurfaces. This is in contrast to the fictitious current source that is often reported in literature. The S-matrix of the coaxial feed is obtained by way of the mode-matching technique, which is subsequently combined with the S-matrix of the cascaded cylindrical metasurfaces to account for the interac…
▽ More
In this letter, a realistic coaxial feed is integrated into the design of cascaded cylindrical metasurfaces. This is in contrast to the fictitious current source that is often reported in literature. The S-matrix of the coaxial feed is obtained by way of the mode-matching technique, which is subsequently combined with the S-matrix of the cascaded cylindrical metasurfaces to account for the interaction between the feed and metasurfaces. The integration of a realistic feed into the design process enables practical cylindrical-metasurface-based devices.
△ Less
Submitted 11 July, 2023; v1 submitted 1 May, 2023;
originally announced May 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Tomography Scan of Charge Density Wave in NbSe2
Authors:
Jyun-Yu Wu,
Yung-Ting Lee,
Guan-Hao Chen,
Zheng-Hong Li,
Chang-Tsan Lee,
Jie-Yu Hsu,
Chia-Nung Kuo,
Juhn-Jong Lin,
Wen-Hao Chang,
Chin-Shan Lue,
Po-Tuan Cheng,
Cheng-Tien Chiang,
Chien-Cheng Kuo,
Chien-Te Wu,
Chi-Cheng Lee,
Ming-Chiang Chung,
Hung-Chung Hsueh,
Chun-Liang Lin
Abstract:
Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized.…
▽ More
Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized. Here by using scanning tunneling microscopy (STM) and density functional theory (DFT), we have monitored the evolution of 3x3 CDW along c-axis and realized a nearly tomography scan of CDW of the topmost layer. The results show that the strength of 3x3 charge order varies while increasing the tunneling current. The 3x3 charge order is relatively strong at the outermost Se level and decreases while probing in between Se and Nb levels. Interestingly, the 3x3 charge order gets strong again as reaching Nb level but along with a phase shift. We further calculated the orbital charge distributions and found that both CDW intensity modulation and phase shift are strongly correlated with the distribution of Se p orbitals and Nb d orbitals.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
Development of advanced photon calibrator for Kamioka gravitational wave detector (KAGRA)
Authors:
Y. Inoue,
B. H. Hsieh,
K. H. Chen,
Y. K. Chu,
K. Ito,
C. Kozakai,
T. Shishido,
Y. Tomigami,
T. Akutsu,
S. Haino,
K. Izumi,
T. Kajita,
N. Kanda,
C. S. Lin,
F. K. Lin,
Y. Moriwaki,
W. Ogaki,
H. F. Pang,
T. Sawada,
T. Tomaru,
T. Suzuki,
S. Tsuchida,
T. Ushiba,
T. Washimi,
T. Yamamoto
, et al. (1 additional authors not shown)
Abstract:
The Kamioka Gravitational wave detector (KAGRA) cryogenic gravitational-wave observatory has commenced joint observations with the worldwide gravitational wave detector network. Precise calibration of the detector response is essential for accurately estimating parameters of gravitational wave sources. A photon calibrator is a crucial calibration tool used in laser interferometer gravitational-wav…
▽ More
The Kamioka Gravitational wave detector (KAGRA) cryogenic gravitational-wave observatory has commenced joint observations with the worldwide gravitational wave detector network. Precise calibration of the detector response is essential for accurately estimating parameters of gravitational wave sources. A photon calibrator is a crucial calibration tool used in laser interferometer gravitational-wave observatory, Virgo, and KAGRA, and it was utilized in joint observation 3 with GEO600 in Germany in April 2020. In this paper, KAGRA implemented three key enhancements: a high-power laser, a power stabilization system, and remote beam position control. KAGRA employs a 20 W laser divided into two beams that are injected onto the mirror surface. By utilizing a high-power laser, the response of the detector at kHz frequencies can be calibrated. To independently control the power of each laser beam, an optical follower servo was installed for power stabilization. The optical path of the photon calibrator beam positions was controlled using pico-motors, allowing for the characterization of the detector rotation response. Additionally, a telephoto camera and quadrant photodetectors were installed to monitor beam positions, and beam position control was implemented to optimize the mirror response. In this paper, we discuss the statistical errors associated with the measurement of relative power noise. We also address systematic errors related to the power calibration model of the photon calibrator and the simulation of elastic deformation effects using finite element analysis. Ultimately, we have successfully reduced the total systematic error from the photon calibrator to 2.0 /%.
△ Less
Submitted 30 March, 2024; v1 submitted 23 February, 2023;
originally announced February 2023.
-
Probing Vibronic Coherence in Charge Migration of Molecules Using Strong Field Sequential Double Ionization
Authors:
C. H. Yuen,
C. D. Lin
Abstract:
We propose a novel scheme for probing vibronic coherence in charge migration in molecules utilizing strong field sequential double ionization. To demonstrate the feasibility of this approach, we perform full simulations of a pump-probe scheme employing few-cycle intense infrared pulses for N$_2$ and O$_2$. We predict that the vibronic coherence between the pumped states will be directly imprinted…
▽ More
We propose a novel scheme for probing vibronic coherence in charge migration in molecules utilizing strong field sequential double ionization. To demonstrate the feasibility of this approach, we perform full simulations of a pump-probe scheme employing few-cycle intense infrared pulses for N$_2$ and O$_2$. We predict that the vibronic coherence between the pumped states will be directly imprinted in experimental observables such as kinetic energy release spectra and branching ratios of the dissociative dications. Our simulations are based on the recently developed DM-SDI model, which is capable of efficiently accounting for molecular orientations and enabling direct comparison with experimental results. Our findings strongly encourage the use of this probing scheme in future charge migration experiments.
△ Less
Submitted 12 February, 2023;
originally announced February 2023.
-
Proton FLASH irradiation platform for small animal setup at Chang Gung Memorial Hospital
Authors:
Tung-Yuan Hsiao,
Lu-Kai Wang,
Tzung-Yuang Chen,
Ching-Fang Yu,
Pan,
Cheng-Ya,
Chun-Chieh Wang,
Chien-Yu Lin,
I-Chun Cho,
Huan Niu,
Chien-Hsu Chen
Abstract:
Background : Proton flash therapy is an emergency research topic in radiation therapy since the Varian announced the promising results from the first in human clinical trial of Flash therapy recently. However, it still needs a lot of researches on this topic, not only to understand the mechanism of the radiobiological effects but also to develop an appropriate dose monitoring system. Purpose : In…
▽ More
Background : Proton flash therapy is an emergency research topic in radiation therapy since the Varian announced the promising results from the first in human clinical trial of Flash therapy recently. However, it still needs a lot of researches on this topic, not only to understand the mechanism of the radiobiological effects but also to develop an appropriate dose monitoring system. Purpose : In this study we setup an experimental station for small animal proton Flash irradiation in a clinical machine. The dose monitoring system is able to provide real-time irradiation dose and irradiation time structure.
Methods : The dose monitoring system includes homebrewed transmission ionization chamber (TIC), plastic scintillator based beam position monitor, and Poor Man Faraday Cup (FC). Both TIC and FC are equipped with a homebrewed fast reading current integral electronics device. The imaging guidance system comprises a moveable CT, laser, as well as attaching a bead on the body surface of the mouse can accurately guide the testing small animal in position.
Results : The dose monitoring system can provide the time structure of delivered dose rate within 1 ms time resolution. Experimental testing results show that the highest dose in one pulse of 230 MeV proton that can be delivered to the target is about 20 Gy during 199 ms pulse period at 100 Gy/s dose rate.
Conclusion : A proton research irradiation platform dedicated for studying small animal Flash biological effects has been established at Chang Gung Memorial Hospital. The final setup data represent a reference for the beam users to plan the experiments as well as for the improvement of the facility.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Airfoil Shape Optimization using Deep Q-Network
Authors:
Siddharth Rout,
Chao-An Lin
Abstract:
The feasibility of using reinforcement learning for airfoil shape optimization is explored. Deep Q-Network (DQN) is used over Markov's decision process to find the optimal shape by learning the best changes to the initial shape for achieving the required goal. The airfoil profile is generated using Bezier control points to reduce the number of control variables. The changes in the position of cont…
▽ More
The feasibility of using reinforcement learning for airfoil shape optimization is explored. Deep Q-Network (DQN) is used over Markov's decision process to find the optimal shape by learning the best changes to the initial shape for achieving the required goal. The airfoil profile is generated using Bezier control points to reduce the number of control variables. The changes in the position of control points are restricted to the direction normal to the chordline so as to reduce the complexity of optimization. The process is designed as a search for an episode of change done to each control point of a profile. The DQN essentially learns the episode of best changes by updating the temporal difference of the Bellman Optimality Equation. The drag and lift coefficients are calculated from the distribution of pressure coefficient along the profile computed using XFoil potential flow solver. These coefficients are used to give a reward to every change during the learning process where the ultimate aim stands to maximize the cumulate reward of an episode.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1235 additional authors not shown)
Abstract:
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is…
▽ More
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.
△ Less
Submitted 31 May, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Input optics systems of the KAGRA detector during O3GK
Authors:
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Bae,
Y. Bae,
L. Baiotti,
R. Bajpai,
M. A. Barton,
K. Cannon,
Z. Cao,
E. Capocasa,
M. Chan,
C. Chen,
K. Chen,
Y. Chen,
C-I. Chiang,
H. Chu,
Y-K. Chu,
S. Eguchi
, et al. (228 additional authors not shown)
Abstract:
KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit…
▽ More
KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
EllipsoNet: Deep-learning-enabled optical ellipsometry for complex thin films
Authors:
Ziyang Wang,
Yuxuan Cosmi Lin,
Kunyan Zhang,
Wenjing Wu,
Shengxi Huang
Abstract:
Optical spectroscopy is indispensable for research and development in nanoscience and nanotechnology, microelectronics, energy, and advanced manufacturing. Advanced optical spectroscopy tools often require both specifically designed high-end instrumentation and intricate data analysis techniques. Beyond the common analytical tools, deep learning methods are well suited for interpreting high-dimens…
▽ More
Optical spectroscopy is indispensable for research and development in nanoscience and nanotechnology, microelectronics, energy, and advanced manufacturing. Advanced optical spectroscopy tools often require both specifically designed high-end instrumentation and intricate data analysis techniques. Beyond the common analytical tools, deep learning methods are well suited for interpreting high-dimensional and complicated spectroscopy data. They offer great opportunities to extract subtle and deep information about optical properties of materials with simpler optical setups, which would otherwise require sophisticated instrumentation. In this work, we propose a computational ellipsometry approach based on a conventional tabletop optical microscope and a deep learning model called EllipsoNet. Without any prior knowledge about the multilayer substrates, EllipsoNet can predict the complex refractive indices of thin films on top of these nontrivial substrates from experimentally measured optical reflectance spectra with high accuracies. This task was not feasible previously with traditional reflectometry or ellipsometry methods. Fundamental physical principles, such as the Kramers-Kronig relations, are spontaneously learned by the model without any further training. This approach enables in-operando optical characterization of functional materials within complex photonic structures or optoelectronic devices.
△ Less
Submitted 11 October, 2022;
originally announced October 2022.
-
$^{197}$Au($γ,\,xn;\,x\,=\,1\thicksim9$) Reaction Cross Section Measurements using Laser-Driven Ultra-Intense $γ$-Ray Source
Authors:
D. Wu,
H. Y. Lan,
J. Y. Zhang,
J. X. Liu,
H. G. Lu,
J. F. Lv,
X. Z. Wu,
H. Zhang,
J. Cai,
Q. Y. Ma,
Y. H. Xia,
Z. N. Wang,
M. Z. Wang,
Z. Y. Yang,
X. L. Xu,
Y. X. Geng,
Y. Y. Zhao,
C. Lin,
W. J. Ma,
J. Q. Yu,
H. R. Wang,
F. L. Liu,
C. Y. He,
B. Guo,
P. Zhu
, et al. (4 additional authors not shown)
Abstract:
We present a new method for the measurements of photonuclear reaction flux-weighted average cross sections and isomeric ratios using a laser-driven bremsstrahlung $γ$-ray source. An ultra-bright ultra-fast 60$\,\thicksim\,$250 MeV bremsstrahlung $γ$-ray source was established using the 200 TW laser facility in the Compact Laser Plasma Accelerator Laboratory, Peking University, which could cover th…
▽ More
We present a new method for the measurements of photonuclear reaction flux-weighted average cross sections and isomeric ratios using a laser-driven bremsstrahlung $γ$-ray source. An ultra-bright ultra-fast 60$\,\thicksim\,$250 MeV bremsstrahlung $γ$-ray source was established using the 200 TW laser facility in the Compact Laser Plasma Accelerator Laboratory, Peking University, which could cover the energy range from knocking out neutrons to producing pions. Stable quasi-monoenergetic electron beams were generated via laser wakefield acceleration with a charge of 300$\,\thicksim\,$600 pC per shot. The averaged $γ$-ray intensities ($\geqslant$8 MeV) were higher than 10$^{8}$ per shot and the instantaneous intensities can reach above 10$^{19}$ s$^{-1}$ with a duration time about 6.7 ps. $^{65}$Cu($γ,\,n$)$^{64}$Cu and $^{27}$Al($γ,\,x$)$^{24}$Na reactions were used as $γ$-ray flux monitors in the experiments. The flux-weighted average cross sections and isomeric ratios of $^{197}$Au($γ,\,xn;\,x\,=\,1\thicksim9$) reactions were analyzed through activation measurements. The results showed good agreement with previous works and proved this method to be accurate. The $^{197}$Au($γ,\,xn;\,x\,=\,7\thicksim\,9$) reaction cross sections were first achieved with the highest threshold energy of 71.410 MeV. Theoretical cross sections of TALYS 1.9 were calculated to compare with experiment results. This method offered a unique way of gaining insight into photonuclear reaction research, especially for short-lived isomers which extremely lack experimental data.
△ Less
Submitted 23 November, 2023; v1 submitted 28 September, 2022;
originally announced September 2022.
-
General invariance and equilibrium conditions for lattice dynamics in 1D, 2D, and 3D materials
Authors:
Changpeng Lin,
Samuel Poncé,
Nicola Marzari
Abstract:
The long-wavelength behavior of vibrational modes plays a central role in carrier transport, phonon-assisted optical properties, superconductivity, and thermomechanical and thermoelectric properties of materials. Here, we present general invariance and equilibrium conditions of the lattice potential; these allow to recover the quadratic dispersions of flexural phonons in low-dimensional materials,…
▽ More
The long-wavelength behavior of vibrational modes plays a central role in carrier transport, phonon-assisted optical properties, superconductivity, and thermomechanical and thermoelectric properties of materials. Here, we present general invariance and equilibrium conditions of the lattice potential; these allow to recover the quadratic dispersions of flexural phonons in low-dimensional materials, in agreement with the phenomenological model for long-wavelength bending modes. We also prove that for any low-dimensional material the bending modes can have a purely out-of-plane polarization in the vacuum direction and a quadratic dispersion in the long-wavelength limit. In addition, we propose an effective approach to treat invariance conditions in crystals with non-vanishing Born effective charges where the long-range dipole-dipole interactions induce a contribution to the lattice potential and stress tensor. Our approach is successfully applied to the phonon dispersions of 158 two-dimensional materials, highlighting its critical relevance in the study of phonon-mediated properties of low-dimensional materials.
△ Less
Submitted 16 November, 2022; v1 submitted 20 September, 2022;
originally announced September 2022.
-
The Development of Spatial Attention U-Net for The Recovery of Ionospheric Measurements and The Extraction of Ionospheric Parameters
Authors:
Guan-Han Huang,
Alexei V. Dmitriev,
Chia-Hsien Lin,
Yu-Chi Chang,
Mon-Chai Hsieh,
Enkhtuya Tsogtbaatar,
Merlin M. Mendoza,
Hao-Wei Hsu,
Yu-Chiang Lin,
Lung-Chih Tsai,
Yung-Hui Li
Abstract:
We train a deep learning artificial neural network model, Spatial Attention U-Net to recover useful ionospheric signals from noisy ionogram data measured by Hualien's Vertical Incidence Pulsed Ionospheric Radar. Our results show that the model can well identify F2 layer ordinary and extraordinary modes (F2o, F2x) and the combined signals of the E layer (ordinary and extraordinary modes and sporadi…
▽ More
We train a deep learning artificial neural network model, Spatial Attention U-Net to recover useful ionospheric signals from noisy ionogram data measured by Hualien's Vertical Incidence Pulsed Ionospheric Radar. Our results show that the model can well identify F2 layer ordinary and extraordinary modes (F2o, F2x) and the combined signals of the E layer (ordinary and extraordinary modes and sporadic Es). The model is also capable of identifying some signals that were not labeled. The performance of the model can be significantly degraded by insufficient number of samples in the data set. From the recovered signals, we determine the critical frequencies of F2o and F2x and the intersection frequency between the two signals. The difference between the two critical frequencies is peaking at 0.63 MHz, with the uncertainty being 0.18 MHz.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Design of the ECCE Detector for the Electron Ion Collider
Authors:
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin,
R. Capobianco
, et al. (259 additional authors not shown)
Abstract:
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track…
▽ More
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector.
△ Less
Submitted 11 May, 2023; v1 submitted 6 September, 2022;
originally announced September 2022.
-
Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept
Authors:
A. Bylinkin,
C. T. Dean,
S. Fegan,
D. Gangadharan,
K. Gates,
S. J. D. Kay,
I. Korover,
W. B. Li,
X. Li,
R. Montgomery,
D. Nguyen,
G. Penman,
J. R. Pybus,
N. Santiesteban,
R. Trotta,
A. Usman,
M. D. Baker,
J. Frantz,
D. I. Glazier,
D. W. Higinbotham,
T. Horn,
J. Huang,
G. Huber,
R. Reed,
J. Roche
, et al. (258 additional authors not shown)
Abstract:
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr…
▽ More
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector.
△ Less
Submitted 6 March, 2023; v1 submitted 30 August, 2022;
originally announced August 2022.
-
Kinetic modeling of economic markets with heterogeneous saving propensities
Authors:
Lijie Cui,
Chuandong Lin
Abstract:
The lattice gas automaton (LGA) is proposed for a closed economic market of agents with heterogeneous saving interests. There are two procedures in the standard LGA, i.e., "propagation" + "transaction". If the propagation step is removed and the transaction is conducted among all agents, the LGA reduces to a more simplified kinetic model. In addition, two dealing rules are imposed on the transacti…
▽ More
The lattice gas automaton (LGA) is proposed for a closed economic market of agents with heterogeneous saving interests. There are two procedures in the standard LGA, i.e., "propagation" + "transaction". If the propagation step is removed and the transaction is conducted among all agents, the LGA reduces to a more simplified kinetic model. In addition, two dealing rules are imposed on the transaction phase. Under Rule I, the trading volume depends on the average saving propensities of an arbitrary pair of agents in trade. Under Rule II, the exchange is governed by a stochastic parameter between the saving propensities of two traders. Besides, two sampling methods are introduced for the random selection of two agents in the iterative process. Specifically, Sampling I is the sampling with replacement and is easier to program. Sampling II is the sampling without replacement and owns a higher computing efficiency. There are slight differences between the stationary wealth distributions simulated by using the two transaction rules and sampling approaches. In addition, the accuracy, robustness and efficiency of the econophysics models are validated by typical numerical tests. The reduced LGA without the propagation step owns a higher computational efficiency than the standard LGA. Moreover, the impact of saving propensities of agents in two groups on the wealth distributions is studied, and the influence of proportions of agents is investigated as well. To quantitatively measure the wealth inequality, the Gini coefficients, Kolkata indices, and deviation degrees of all agents and two groups are simulated and analyzed in detail. This work is helpful to further analyze and predict the dynamic process of wealth distribution in the realistic economic market.
△ Less
Submitted 27 December, 2022; v1 submitted 30 July, 2022;
originally announced August 2022.