-
Time-resolved phase-lock pressure-sensitive paint measurement of trailing edge noise dynamics
Authors:
M. Imai,
K. Konishi,
K. Ogura,
K. Nakakita,
M. Kameda
Abstract:
Pressure-sensitive paint (PSP) was applied to the surface of a NACA0012 airfoil to investigate pressure fluctuations associated with trailing edge (TE) noise under low-velocity flow conditions. The primary focus is to assess the feasibility of employing laser pulses exposed at the airfoil surface to mitigate TE noise. However, the weak pressure fluctuations accompanying TE noise pose a challenge,…
▽ More
Pressure-sensitive paint (PSP) was applied to the surface of a NACA0012 airfoil to investigate pressure fluctuations associated with trailing edge (TE) noise under low-velocity flow conditions. The primary focus is to assess the feasibility of employing laser pulses exposed at the airfoil surface to mitigate TE noise. However, the weak pressure fluctuations accompanying TE noise pose a challenge, as they are overshadowed by image sensor noise in high-speed cameras capturing PSP emission changes. A novel time-resolved phase-locking technique was introduced to address this issue, utilizing the signal from a semiconductor pressure transducer at the trailing edge as a phase-lock trigger source. By repetitively conducting phase-locked measurements (1150 times), time series ensemble-averaged data based on PSP emission images were obtained, enabling the capture of these subtle pressure fluctuations. Quantitatively, fluctuations with a dominant frequency of 679 Hz and an amplitude of 50 Pa are resolved within an accuracy of about 15 Pa, achieved at a recording rate of 19.2 kHz. Both the suppression and subsequent redevelopment of the pressure field with the TE noise offer valuable insights into the dynamics of TE noise and open avenues for targeted noise reduction strategies in aerodynamic applications.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
CFD analysis on the performance of a coaxial rotor with lift offset at high advance ratios
Authors:
Kaito Hayami,
Hideaki Sugawara,
Takumi Yumino,
Yasutada Tanabe,
Masaharu Kameda
Abstract:
The aerodynamic performance of an isolated coaxial rotor in forward flight is analyzed by a high-fidelity computational fluid dynamics (CFD) approach. The analysis focuses on the high-speed forward flight with an advance ratio of 0.5 or higher. The effect of the degree of the rolling moment on the rotor thrust, called lift offset, is studied in detail. The coaxial rotor model is a pair of contraro…
▽ More
The aerodynamic performance of an isolated coaxial rotor in forward flight is analyzed by a high-fidelity computational fluid dynamics (CFD) approach. The analysis focuses on the high-speed forward flight with an advance ratio of 0.5 or higher. The effect of the degree of the rolling moment on the rotor thrust, called lift offset, is studied in detail. The coaxial rotor model is a pair of contrarotating rotors, each rotor consisting of two untwisted blades with a radius of 1.016 m. The pitch angle of the blades is controlled by both collective and cyclic as in a conventional single main-rotor helicopter. CFD analysis is performed using a flow solver based on the compressible Navier-Stokes equations with a Reynolds-averaged turbulence model. Laminar/turbulent transition in the boundary layer is taken into account in the calculation. The rotor trim for target forces and moments is achieved using a gradient-based delta-form blade pitch angle adjusting technique in conjunction with CFD analysis. The reliability of the calculations is confirmed by comparison with published wind tunnel experiments and two comprehensive analyses. Applying the lift offset improves the lift-to-effective drag ratio (lift-drag ratio) and reduces thrust fluctuations. However, in the case where the advance ratio exceeds 0.6, the lift-drag ratio drops significantly even if the lift offset is 0.3. The thrust fluctuation also increases with such a high advance ratio. Detailed analysis reveals that the degradation of aerodynamic performance and vibratory aerodynamic loads is closely related to the pitch angle control to compensate for the reduction in thrust on the retreating side due to the increased reverse flow region. It is effective to reduce the collective and longitudinal cyclic pitch angles for the improvement of the aerodynamic performance of coaxial rotors with an appropriate lift offset.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
A Coupled CFD/Trim Analysis of Coaxial Rotors
Authors:
Hideaki Sugawara,
Yasutada Tanabe,
Masaharu Kameda
Abstract:
A numerical simulation method of computational fluid dynamics (CFD) coupling with a trim analysis for coaxial rotor systems is described in this paper. The trim analysis is implemented using a rotorcraft flow solver, rFlow3D. Six target forces and moments, which are the thrust of the coaxial rotor system, the rolling and pitching moments for each upper and lower rotor, and the torque balance for y…
▽ More
A numerical simulation method of computational fluid dynamics (CFD) coupling with a trim analysis for coaxial rotor systems is described in this paper. The trim analysis is implemented using a rotorcraft flow solver, rFlow3D. Six target forces and moments, which are the thrust of the coaxial rotor system, the rolling and pitching moments for each upper and lower rotor, and the torque balance for yaw control, are considered as the trim conditions. The blade pitch angles of both upper and lower rotors are adjusted to satisfy the target trim conditions through the trim analysis by being loosely coupled with the CFD solver. Verification of the trim analysis method and validation of the prediction accuracy of aerodynamic performance are performed based on previous experimental and numerical studies in hover and forward flight using the lift-offset conditions. It is shown that the predicted hover performances of the torque-balanced coaxial rotors are in excellent agreement with the experimental data. It is also verified that the lift-offset conditions in forward flight are simulated using this established trim analysis. Furthermore, reasonable agreements with other computational results are indicated.
△ Less
Submitted 17 August, 2022;
originally announced August 2022.
-
Resolvent analysis on the origin of two-dimensional transonic buffet
Authors:
Yoimi Kojima,
Chi-An Yeh,
Kunihiko Taira,
Masaharu Kameda
Abstract:
Resolvent analysis is performed to identify the origin of two-dimensional transonic buffet over an airfoil. The base flow for the resolvent analysis is the time-averaged flow over a NACA 0012 airfoil at a chord-based Reynolds number of 2000 and a free-stream Mach number of 0.85. We reveal that the mechanism of buffet is buried underneath the global low-Reynolds-number flow physics. At this low Rey…
▽ More
Resolvent analysis is performed to identify the origin of two-dimensional transonic buffet over an airfoil. The base flow for the resolvent analysis is the time-averaged flow over a NACA 0012 airfoil at a chord-based Reynolds number of 2000 and a free-stream Mach number of 0.85. We reveal that the mechanism of buffet is buried underneath the global low-Reynolds-number flow physics. At this low Reynolds number, the dominant flow feature is the von Karman shedding. However, we show that with the appropriate forcing input, buffet can appear even at a Reynolds number that is much lower than what is traditionally associated with transonic buffet. The source of buffet is identified to be at the shock foot from the windowed resolvent analysis, which is validated by companion simulations using sustained forcing inputs based on resolvent modes. We also comment on the role of perturbations in the vicinity of the trailing edge. The present study not only provides insights on the origin of buffet but also serves a building block for low-Reynolds-number compressible aerodynamics in light of the growing interests in Martian flights.
△ Less
Submitted 23 March, 2021;
originally announced March 2021.
-
Optical-flow-based background-oriented schlieren technique for measuring a laser-induced underwater shock wave
Authors:
Keisuke Hayasaka,
Yoshiyuki Tagawa,
Tianshu Liu,
Masaharu Kameda
Abstract:
The background-oriented schlieren (BOS) technique with the physics-based optical flow method (OF-BOS) is developed for measuring the pressure field of a laser-induced underwater shock wave. Compared to BOS with the conventional cross-correlation method in PIV (called PIV-BOS), by using the OF-BOS, the displacement field generated by the small density gradient in water can be obtained at the spatia…
▽ More
The background-oriented schlieren (BOS) technique with the physics-based optical flow method (OF-BOS) is developed for measuring the pressure field of a laser-induced underwater shock wave. Compared to BOS with the conventional cross-correlation method in PIV (called PIV-BOS), by using the OF-BOS, the displacement field generated by the small density gradient in water can be obtained at the spatial resolution of one vector per pixel. The corresponding density and pressure fields can be further extracted. It is particularly demonstrated that the sufficiently high spatial resolution of the extracted displacement vector field is required in the tomographic reconstruction to correctly infer the pressure field of the spherical underwater shock wave. The capability of the OF-BOS is critically evaluated based on synchronized hydrophone measurements. Special emphasis is placed on direct comparison between the OF-BOS with the PIV-BOS.
△ Less
Submitted 1 October, 2016;
originally announced October 2016.
-
On pressure impulse of a laser-induced underwater shock wave
Authors:
Yoshiyuki Tagawa,
Shota Yamamoto,
Keisuke Hayasaka,
Masaharu Kameda
Abstract:
We experimentally examine a laser-induced underwater shock wave with a special attention to pressure impulse, the time integral of pressure evolution. %total pressure variation associated with the shock wave. Plasma formation, shock-wave expansion, and pressure in water are observed simultaneously using a combined measurement system that obtains high-resolution nanosecond-order image sequences. Th…
▽ More
We experimentally examine a laser-induced underwater shock wave with a special attention to pressure impulse, the time integral of pressure evolution. %total pressure variation associated with the shock wave. Plasma formation, shock-wave expansion, and pressure in water are observed simultaneously using a combined measurement system that obtains high-resolution nanosecond-order image sequences. These detailed measurements reveal a non-spherically-symmetric distribution of pressure peak. In contrast, remarkably, pressure impulse is found to distribute symmetrically for a wide range of experimental parameters even when the shock waves are emitted from an elongated region. The structure is determined to be a collection of multiple spherical shock waves originated from point-like plasmas in the elongated region.
△ Less
Submitted 1 October, 2016; v1 submitted 24 April, 2015;
originally announced April 2015.
-
Application of background-oriented schlieren (BOS) technique to a laser-induced underwater shock wave
Authors:
Shota Yamamoto,
Yoshiyuki Tagawa,
Masaharu Kameda
Abstract:
We build an ultra-high-speed imaging system based on the background-oriented schlieren (BOS) technique in order to capture a laser-induced underwater shock wave. This BOS technique is able to provide two-dimensional density-gradient field of fluid and requires a simple setup. The imaging system consists of an ultra-high speed video camera, a laser stroboscope, and a patterned background. This syst…
▽ More
We build an ultra-high-speed imaging system based on the background-oriented schlieren (BOS) technique in order to capture a laser-induced underwater shock wave. This BOS technique is able to provide two-dimensional density-gradient field of fluid and requires a simple setup. The imaging system consists of an ultra-high speed video camera, a laser stroboscope, and a patterned background. This system takes images every 0.2 $μ$s. Furthermore, since the density change of water disturbed by the shock is exceedingly small, the system has high spatial resolution $\sim$ 10 $μ$m/pixel. Using this BOS system, we examine temporal position of a shock wave. The position agrees well with that measured by conventional shadowgraph, which indicates that the high-speed imaging system can successfully capture the instantaneous position of the underwater shock wave that propagates with the speed of about 1500 m/s. The local density gradient can be determined up to $O$(10$^3$ kg/m$^4$), which is confirmed by the gradient estimated from the pressure time history measured by a hydrophone.
△ Less
Submitted 18 March, 2015;
originally announced March 2015.
-
A focused liquid jet formed by a water hammer in a test tube
Authors:
Akihito Kiyama,
Yoshiyuki Tagawa,
Keita Ando,
Masaharu Kameda
Abstract:
We investigate motion of a gas-liquid interface in a test tube induced by a large acceleration via impulsive force. We conduct simple experiments in which the tube partially filled with a liquid falls under gravity and impacts a rigid floor. A curved gas-liquid interface inside the tube reverses and eventually forms an elongated jet (i.e. the so-called a focused jet). In our experiments, there ari…
▽ More
We investigate motion of a gas-liquid interface in a test tube induced by a large acceleration via impulsive force. We conduct simple experiments in which the tube partially filled with a liquid falls under gravity and impacts a rigid floor. A curved gas-liquid interface inside the tube reverses and eventually forms an elongated jet (i.e. the so-called a focused jet). In our experiments, there arises either vibration of the interface or increment in the velocity of a liquid jet accompanied by the onset of cavitation in the liquid column. These phenomena cannot be explained by considering pressure impulse in a classical potential flow analysis, which does not account for finite speeds of sound as well as phase change. Here we model such water-hammer events as a result of one-dimensional pressure wave propagation and its interaction with boundaries through acoustic impedance mismatching. The method of characteristics is applied to describe pressure wave interactions and the subsequent cavitation. The proposed model is found to allow us to capture the unsteady features of the liquid jet.
△ Less
Submitted 18 February, 2015; v1 submitted 16 February, 2015;
originally announced February 2015.