Showing 1–10 of 10 results for author: Joosten, S

Performance of a coarsely pixelated LAPPD photosensor for the SoLID gas Cherenkov detectors

Authors: J. Xie, C. Peng, S. Joosten, Z. -E. Meziani, A. Camsonne, M. Jones, S. Malace, E. Kaczanowicz, M. Rehfuss, N. Sparveris, M. Paolone, M. Foley, M. Minot, M. Popecki, Z. W. Zhao

Abstract: The SoLID spectrometer's gas Cherenkov counters require photosensors that operate in a high luminosity and high background environment. The reference design features arrays of 9 or 16 tiled multi-anode photomultipliers (MaPMTs), distributed across 32 sectors, to serve the light-gas and heavy-gas Cherenkov counters, respectively. To assess the viability of a pixelated INCOM Large Area Picosecond Ph… ▽ More The SoLID spectrometer's gas Cherenkov counters require photosensors that operate in a high luminosity and high background environment. The reference design features arrays of 9 or 16 tiled multi-anode photomultipliers (MaPMTs), distributed across 32 sectors, to serve the light-gas and heavy-gas Cherenkov counters, respectively. To assess the viability of a pixelated INCOM Large Area Picosecond Photodetector (LAPPD$^{\rm TM}$) as an alternative photosensor to replace MaPMT arrays in either detector, we evaluated its performance under realistic SoLID running conditions in Hall C at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). The results of this test confirmed that the coarse-pixelated (2.5$\times$2.5 cm$^2$ pixel size) LAPPD is capable of handling the total projected signal and background rates of the three pillar SoLID experiments. The tested photosensor detected Cherenkov signals with the capability of separating single-electron events from pair production events while rejecting background. Although the design was not aimed at ring-imaging Cherenkov detectors, Cherenkov disk images were captured in two different gas radiators. Through a direct comparison with a GEANT4 simulation, we confirmed the experimental performance of the LAPPD. △ Less

Submitted 3 July, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Comments: 11 pages, 8 figures

Key4hep: Progress Report on Integrations

Authors: Erica Brondolin, Juan Miguel Carceller, Wouter Deconinck, Wenxing Fang, Brieuc Francois, Frank-Dieter Gaede, Gerardo Ganis, Benedikt Hegner, Clement Helsens, Xingtao Huang, Sylvester Joosten, Sang Hyun Ko, Tao Lin, Teng Li, Weidong Li, Thomas Madlener, Leonhard Reichenbach, André Sailer, Swathi Sasikumar, Juraj Smiesko, Graeme A Stewart, Alvaro Tolosa-Delgado, Valentin Volkl, Xiaomei Zhang, Jiaheng Zou

Abstract: Detector studies for future experiments rely on advanced software tools to estimate performance and optimize their design and technology choices. The Key4hep project provides a flexible turnkey solution for the full experiment life-cycle based on established community tools such as ROOT, Geant4, DD4hep, Gaudi, podio and spack. Members of the CEPC, CLIC, EIC, FCC, and ILC communities have joined to… ▽ More Detector studies for future experiments rely on advanced software tools to estimate performance and optimize their design and technology choices. The Key4hep project provides a flexible turnkey solution for the full experiment life-cycle based on established community tools such as ROOT, Geant4, DD4hep, Gaudi, podio and spack. Members of the CEPC, CLIC, EIC, FCC, and ILC communities have joined to develop this framework and have merged, or are in the progress of merging, their respective software environments into the Key4hep stack. These proceedings will give an overview over the recent progress in the Key4hep project: covering the developments towards adaptation of state-of-the-art tools for simulation (DD4hep, Gaussino), track and calorimeter reconstruction (ACTS, CLUE), particle flow (PandoraPFA), analysis via RDataFrame, and visualization with Phoenix, as well as tools for testing and validation. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Comments: Proceedings of CHEP 2023

ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider

Authors: ATHENA Collaboration, J. Adam, L. Adamczyk, N. Agrawal, C. Aidala, W. Akers, M. Alekseev, M. M. Allen, F. Ameli, A. Angerami, P. Antonioli, N. J. Apadula, A. Aprahamian, W. Armstrong, M. Arratia, J. R. Arrington, A. Asaturyan, E. C. Aschenauer, K. Augsten, S. Aune, K. Bailey, C. Baldanza, M. Bansal, F. Barbosa, L. Barion , et al. (415 additional authors not shown)

Abstract: ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e… ▽ More ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges. △ Less

Submitted 13 October, 2022; originally announced October 2022.

Journal ref: JINST 17 (2022) 10, P10019

The Solenoidal Large Intensity Device (SoLID) for JLab 12 GeV

Authors: John Arrington, Jay Benesch, Alexandre Camsonne, Jimmy Caylor, Jian-Ping Chen, Silviu Covrig Dusa, Alexander Emmert, George Evans, Haiyan Gao, J. Ole Hansen, Garth M. Huber, Sylvester Joosten, Vladimir Khachatryan, Nilanga Liyanage, Zein-Eddine Meziani, Michael Nycz, Chao Peng, Michael Paolone, Whit Seay, Paul A. Souder, Nikos Sparveris, Hubert Spiesberger, Ye Tian, Eric Voutier, Junqi Xie , et al. (6 additional authors not shown)

Abstract: The Solenoidal Large Intensity Device (SoLID) is a new experimental apparatus planned for Hall A at the Thomas Jefferson National Accelerator Facility (JLab). SoLID will combine large angular and momentum acceptance with the capability to handle very high data rates at high luminosity. With a slate of approved high-impact physics experiments, SoLID will push JLab to a new limit at the QCD intensit… ▽ More The Solenoidal Large Intensity Device (SoLID) is a new experimental apparatus planned for Hall A at the Thomas Jefferson National Accelerator Facility (JLab). SoLID will combine large angular and momentum acceptance with the capability to handle very high data rates at high luminosity. With a slate of approved high-impact physics experiments, SoLID will push JLab to a new limit at the QCD intensity frontier that will exploit the full potential of its 12 GeV electron beam. In this paper, we present an overview of the rich physics program that can be realized with SoLID, which encompasses the tomography of the nucleon in 3-D momentum space from Semi-Inclusive Deep Inelastic Scattering (SIDIS), expanding the phase space in the search for new physics and novel hadronic effects in parity-violating DIS (PVDIS), a precision measurement of $J/ψ$ production at threshold that probes the gluon field and its contribution to the proton mass, tomography of the nucleon in combined coordinate and momentum space with deep exclusive reactions, and more. To meet the challenging requirements, the design of SoLID described here takes full advantage of recent progress in detector, data acquisition and computing technologies. In addition, we outline potential experiments beyond the currently approved program and discuss the physics that could be explored should upgrades of CEBAF become a reality in the future. △ Less

Submitted 12 February, 2023; v1 submitted 18 September, 2022; originally announced September 2022.

Comments: This white paper for the SoLID program at Jefferson Lab was prepared in part as an input to the 2023 NSAC Long Range Planning exercise. To be submitted to J. Phys. G

Solid State Detectors and Tracking for Snowmass

Authors: A. Affolder, A. Apresyan, S. Worm, M. Albrow, D. Ally, D. Ambrose, E. Anderssen, N. Apadula, P. Asenov, W. Armstrong, M. Artuso, A. Barbier, P. Barletta, L. Bauerdick, D. Berry, M. Bomben, M. Boscardin, J. Brau, W. Brooks, M. Breidenbach, J. Buckley, V. Cairo, R. Caputo, L. Carpenter, M. Centis-Vignali , et al. (110 additional authors not shown)

Abstract: Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the… ▽ More Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03). △ Less

Submitted 19 October, 2022; v1 submitted 8 September, 2022; originally announced September 2022.

Comments: for the Snowmass Instrumentation Frontier Solid State Detector and Tracking community

Monolithic Active Pixel Sensors on CMOS technologies

Authors: Nicole Apadula, Whitney Armstrong, James Brau, Martin Breidenbach, R. Caputo, Gabriella Carinii, Alberto Collu, Marcel Demarteau, Grzegorz Deptuch, Angelo Dragone, Gabriele Giacomini, Carl Grace, Norman Graf, Leo Greiner, Ryan Herbst, Gunther Haller, Manoj Jadhav, Sylvester Joosten, Christopher J. Kenney, C. Kierans, Jihee Kim, Thomas Markiewicz, Yuan Mei, Jessica Metcalfe, Zein-Eddine Meziani , et al. (15 additional authors not shown)

Abstract: Collider detectors have taken advantage of the resolution and accuracy of silicon detectors for at least four decades. Future colliders will need large areas of silicon sensors for low mass trackers and sampling calorimetry. Monolithic Active Pixel Sensors (MAPS), in which Si diodes and readout circuitry are combined in the same pixels, and can be fabricated in some of standard CMOS processes, are… ▽ More Collider detectors have taken advantage of the resolution and accuracy of silicon detectors for at least four decades. Future colliders will need large areas of silicon sensors for low mass trackers and sampling calorimetry. Monolithic Active Pixel Sensors (MAPS), in which Si diodes and readout circuitry are combined in the same pixels, and can be fabricated in some of standard CMOS processes, are a promising technology for high-granularity and light detectors. In this paper we review 1) the requirements on MAPS for trackers and electromagnetic calorimeters (ECal) at future colliders experiments, 2) the ongoing efforts towards dedicated MAPS for the Electron-Ion Collider (EIC) at BNL, for which the EIC Silicon Consortium was already instantiated, and 3) space-born applications for MeV $γ$-ray experiments with MAPS based trackers (AstroPix). △ Less

Submitted 28 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 25 pages, 18 figures, contribution to Snowmass 2021

Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report

Authors: R. Abdul Khalek, A. Accardi, J. Adam, D. Adamiak, W. Akers, M. Albaladejo, A. Al-bataineh, M. G. Alexeev, F. Ameli, P. Antonioli, N. Armesto, W. R. Armstrong, M. Arratia, J. Arrington, A. Asaturyan, M. Asai, E. C. Aschenauer, S. Aune, H. Avagyan, C. Ayerbe Gayoso, B. Azmoun, A. Bacchetta, M. D. Baker, F. Barbosa, L. Barion , et al. (390 additional authors not shown)

Abstract: This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon… ▽ More This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and developing detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions. This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter △ Less

Submitted 26 October, 2021; v1 submitted 8 March, 2021; originally announced March 2021.

Comments: 902 pages, 415 authors, 151 institutions

Report number: BNL-220990-2021-FORE, JLAB-PHY-21-3198, LA-UR-21-20953

Journal ref: Nucl. Phys. A 1026 (2022) 122447

Performance of photosensors in a high-rate environment for gas Cherenkov detectors

Authors: Chao Peng, Junqi Xie, Sylvester Joosten, Zein-Eddine Meziani, Alexandre Camsonne, Mark Jones, Edward Kaczanowicz, Melanie Rehfuss, Nikolaos Sparveris, Michael Paolone, Michael Foley, Michael Minot, Mark Popecki

Abstract: The solenoidal large intensity device (SoLID) at Jefferson Lab will push the boundaries of luminosity for a large-acceptance detector, which necessitates the use of a light-gas threshold Cherenkov counter for online event selection. Due to the high luminosity, the single-photon background rate in this counter can exceed 160 kHz/cm$^2$ at the photosensors. Therefore, it is essential to validate the… ▽ More The solenoidal large intensity device (SoLID) at Jefferson Lab will push the boundaries of luminosity for a large-acceptance detector, which necessitates the use of a light-gas threshold Cherenkov counter for online event selection. Due to the high luminosity, the single-photon background rate in this counter can exceed 160 kHz/cm$^2$ at the photosensors. Therefore, it is essential to validate the high-rate limits of the planned photosensors and readout electronics in order to mitigate the risk of failure. We report on the design and an early set of studies carried out using a small telescopic Cherenkov device in a high-rate environment up to 60 kHz/cm$^2$, in Hall C at Jefferson Lab. Commercially available multi-anode photomultipliers (MaPMT) and low-cost large-area picosecond photodetectors (LAPPD) were tested using the JLab FADC250 modules for readout. The test beam results show that the MaPMT array and the internal stripline LAPPD can detect and identify single-electron and pair-production events in high-rate environments. Due to its higher quantum efficiency, the MaPMT array provided a better separation between the single-electron and the pair-production events compared to the internal stripline LAPPD. A GEANT4 simulation confirms the experimental performance of our telescopic device. △ Less

Submitted 3 May, 2022; v1 submitted 23 November, 2020; originally announced November 2020.

Comments: 16 pages, 11 figures

Picosecond Timing Resolution Measurements of Low Gain Avalanche Detectors with a 120 GeV Proton Beam for the TOPSiDE Detector Concept

Authors: M. Jadhav, W. Armstrong, I. Cloet, S. Joosten, S. M. Mazza, J. Metcalfe, Z. -E. Meziani, H. F. -W. Sadrozinski, B. Schumm, A. Seiden

Abstract: This paper presents results that take a critical step toward proving 10 ps timing resolution's feasibility for particle identification in the TOPSiDE detector concept for the Electron-Ion Collider. Measurements of LGADs with a thickness of 35 micro-m and 50 micro-m are evaluated with a 120 GeV proton beam. The performance of the gain and timing response is assessed, including the dependence on the… ▽ More This paper presents results that take a critical step toward proving 10 ps timing resolution's feasibility for particle identification in the TOPSiDE detector concept for the Electron-Ion Collider. Measurements of LGADs with a thickness of 35 micro-m and 50 micro-m are evaluated with a 120 GeV proton beam. The performance of the gain and timing response is assessed, including the dependence on the reverse bias voltage and operating temperature. The best timing resolution of UFSDs in a test beam to date is achieved using three combined planes of 35 micro-m thick LGADs at -30 degree celsius with a precision of 14.3 ps (uncertainty 1.5 ps). △ Less

Submitted 19 February, 2021; v1 submitted 6 October, 2020; originally announced October 2020.

Comments: 18 pages, 16 figures, 3 tables

Enhanced UV light detection using a p-terphenyl wavelength shifter

Authors: S. Joosten, E. Kaczanowicz, M. Ungaro, M. Rehfuss, K. Johnston, Z. -E. Meziani

Abstract: UV-glass photomultiplier tubes (PMTs) have poor photon detection efficiency for wavelengths below $300\,\text{nm}$ due to the opaqueness of the window material. Costly quartz PMTs could be used to enhance the efficiency below $300\,\text{nm}$. A less expensive solution that dramatically improves this efficiency is the application of a thin film of a p-terphenyl (PT) wavelength shifter on UV-glass… ▽ More UV-glass photomultiplier tubes (PMTs) have poor photon detection efficiency for wavelengths below $300\,\text{nm}$ due to the opaqueness of the window material. Costly quartz PMTs could be used to enhance the efficiency below $300\,\text{nm}$. A less expensive solution that dramatically improves this efficiency is the application of a thin film of a p-terphenyl (PT) wavelength shifter on UV-glass PMTs. This improvement was quantified for Photonis XP4500B PMTs for wavelengths between $200\,\text{nm}$ and $400\,\text{nm}$. The gain factor ranges up to 5.4 $\pm$ 0.5 at a wavelength of $215\,\text{nm}$, with a material load of $110\pm10\,μ\text{g}/\text{cm}^2$ ($894\,\text{nm}$). The wavelength shifter was found to be fully transparent for wavelengths greater than $300\,\text{nm}$. The resulting gain in detection efficiency, when used in a typical Cherenkov counter, was estimated to be of the order of 40\%. Consistent coating quality was assured by a rapid gain testing procedure using narrow-band UV LEDs. Based on these results, 200 Photonis XP4500B PMTs were treated with PT for the upgraded low-threshold Cherenkov counter (LTCC) to be used in the CEBAF Large Acceptance Spectrometer upgraded detector (CLAS12) at the Thomas Jefferson National Accelerator Facility. △ Less

Submitted 19 July, 2017; v1 submitted 10 November, 2016; originally announced November 2016.