Showing 1–29 of 29 results for author: Jiang, F

On-chip high energy photon radiation source based on microwave-dielectric undulator

Authors: Fuming Jiang, Xinyu Xie, Chengpu Liu, Ye Tian

Abstract: A new on-chip light source configuration has been proposed, which utilizes the interaction between microwave and a dielectric nanopillar array to generate a periodic electromagnetic near field, and applies periodic transverse acceleration to relativistic electrons to generate high-energy photon radiation. Here the dielectric nanopillar array interacting with microwave acts as the electron undulato… ▽ More A new on-chip light source configuration has been proposed, which utilizes the interaction between microwave and a dielectric nanopillar array to generate a periodic electromagnetic near field, and applies periodic transverse acceleration to relativistic electrons to generate high-energy photon radiation. Here the dielectric nanopillar array interacting with microwave acts as the electron undulator, in which the near field drives electrons to oscillate. When an electron beam operates in this nanopillar array in this light source configuration, it is subjected to a periodic transverse near-field force, and will radiate X-ray or even gamma-ray high energy photons after a relativistic frequency up-conversion. Compared with the laser-dielectric undulator based on the interaction between strong lasers and nanostructures to generate a plasmonic near field, this configuration is less prone to damage during operation. △ Less

Submitted 29 June, 2024; originally announced July 2024.

Kinetic Suppression of Photoinduced Halide Migration in Wide Bandgap Perovskites via Surface Passivation

Authors: Farhad Akrami, Fangyuan Jiang, Rajiv Giridharagopal, David S. Ginger

Abstract: In this work, we study the kinetics of photoinduced halide migration in FA$_{0.8}$Cs$_{0.2}$Pb(I$_{0.8}$Br$_{0.2}$)$_3$ wide (~1.69 eV) bandgap perovskites and show halide migration slows down following surface passivation with (3-aminopropyl) trimethoxysilane (APTMS). We use scanning Kelvin probe microscopy (SKPM) to probe the contact potential difference (CPD) shift under illumination, and the k… ▽ More In this work, we study the kinetics of photoinduced halide migration in FA$_{0.8}$Cs$_{0.2}$Pb(I$_{0.8}$Br$_{0.2}$)$_3$ wide (~1.69 eV) bandgap perovskites and show halide migration slows down following surface passivation with (3-aminopropyl) trimethoxysilane (APTMS). We use scanning Kelvin probe microscopy (SKPM) to probe the contact potential difference (CPD) shift under illumination, and the kinetics of surface potential relaxation in the dark. Our results show APTMS-passivated perovskites exhibit a smaller CPD shift under illumination, and a slower surface potential relaxation in the dark. We compare the evolution of the photoluminescence spectra of APTMS-passivated and unpassivated perovskites under illumination. We find that APTMS-passivated perovskites exhibit more than 5 times slower photoluminescence redshift, consistent with the slower surface potential relaxation as observed by SKPM. These observations provide evidence for kinetic suppression of photoinduced halide migration in APTMS-passivated samples, likely due to reduced halide vacancy densities, opening avenues to more efficient and stable devices. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Architecture Optimization Dramatically Improves Reverse Bias Stability in Perovskite Solar Cells: A Role of Polymer Hole Transport Layers

Authors: Fangyuan Jiang, Yangwei Shi, Tanka R. Rana, Daniel Morales, Isaac Gould, Declan P. McCarthy, Joel Smith, Grey Christoforo, Hannah Contreras, Stephen Barlow, Aditya D. Mohite, Henry Snaith, Seth R. Marder, J. Devin MacKenzie, Michael D. McGehee, David S. Ginger

Abstract: We report that device architecture engineering has a substantial impact on the reverse bias instability that has been reported as a critical issue in commercializing perovskite solar cells. We demonstrate breakdown voltages exceeding -15 V in typical pin structured perovskite solar cells via two steps: i) using polymer hole transporting materials; ii) using a more electrochemically stable gold ele… ▽ More We report that device architecture engineering has a substantial impact on the reverse bias instability that has been reported as a critical issue in commercializing perovskite solar cells. We demonstrate breakdown voltages exceeding -15 V in typical pin structured perovskite solar cells via two steps: i) using polymer hole transporting materials; ii) using a more electrochemically stable gold electrode. While device degradation can be exacerbated by higher reverse bias and prolonged exposure, our as-fabricated perovskite solar cells completely recover their performance even after stressing at -7 V for 9 hours both in the dark and under partial illumination. Following these observations, we systematically discuss and compare the reverse bias driven degradation pathways in perovskite solar cells with different device architectures. Our model highlights the role of electrochemical reaction rates and species in dictating the reverse bias stability of perovskite solar cells. △ Less

Submitted 15 August, 2023; originally announced August 2023.

Novel Conservative Methods for Adaptive Force Softening in Collisionless and Multi-Species N-Body Simulations

Authors: Philip F. Hopkins, Ethan O. Nadler, Michael Y. Grudic, Xuejian Shen, Isabel Sands, Fangzhou Jiang

Abstract: Modeling self-gravity of collisionless fluids (e.g. ensembles of dark matter, stars, black holes, dust, planetary bodies) in simulations is challenging and requires some force softening. It is often desirable to allow softenings to evolve adaptively, in any high-dynamic range simulation, but this poses unique challenges of consistency, conservation, and accuracy, especially in multi-physics simula… ▽ More Modeling self-gravity of collisionless fluids (e.g. ensembles of dark matter, stars, black holes, dust, planetary bodies) in simulations is challenging and requires some force softening. It is often desirable to allow softenings to evolve adaptively, in any high-dynamic range simulation, but this poses unique challenges of consistency, conservation, and accuracy, especially in multi-physics simulations where species with different softening laws may interact. We therefore derive a generalized form of the energy-and-momentum conserving gravitational equations of motion, applicable to arbitrary rules used to determine the force softening, together with consistent associated timestep criteria, interaction terms between species with different softening laws, and arbitrary maximum/minimum softenings. We also derive new methods to maintain better accuracy and conservation when symmetrizing forces between particles. We review and extend previously-discussed adaptive softening schemes based on the local neighbor particle density, and present several new schemes for scaling the softening with properties of the gravitational field, i.e. the potential or acceleration or tidal tensor. We show that the tidal softening scheme not only represents a physically-motivated, translation and Galilean invariant and equivalence-principle respecting (and therefore conservative) method, but imposes negligible timestep or other computational penalties, ensures that pairwise two-body scattering is small compared to smooth background forces, and can resolve outstanding challenges in properly capturing tidal disruption of substructures (minimizing artificial destruction) while also avoiding excessive N-body heating. We make all of this public in the GIZMO code. △ Less

Submitted 28 August, 2023; v1 submitted 13 December, 2022; originally announced December 2022.

Comments: 25 pages, 13 figures. Updated to match MNRAS accepted version. Six appendices with additional details and tests expanded

(3-Aminopropyl)trimethoxysilane Surface Passivation Improves Perovskite Solar Cell Performance by Reducing Surface Recombination Velocity

Authors: Yangwei Shi, Esteban Rojas-Gatjens, Jian Wang, Justin Pothoof, Rajiv Giridharagopal, Kevin Ho, Fangyuan Jiang, Margherita Taddei, Zhaoqing Yang, Carlos Silva-Acuña, David S. Ginger

Abstract: We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show the APTMS serves to passivate defects at the perovskite surface, while also decoupling the perovskite from detrimental interactions at the C60 interface. We me… ▽ More We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show the APTMS serves to passivate defects at the perovskite surface, while also decoupling the perovskite from detrimental interactions at the C60 interface. We measure a SRV of ~125 + 14 cm/s, and a concomitant increase of ~100 meV in quasi-Fermi level splitting in passivated devices compared to the controls. We use time-resolved photoluminescence and excitation-correlation photoluminescence spectroscopy to show that APTMS passivation effectively suppresses non-radiative recombination. We show that APTMS improves both the fill factor and open-circuit voltage (VOC), increasing VOC from 1.03 V for control devices to 1.09 V for APTMS-passivated devices, which leads to PCE increasing from 15.90% to 18.03%. We attribute enhanced performance to reduced defect density or suppressed nonradiative recombination and low SRV at the perovskite/transporting layers interface. △ Less

Submitted 29 September, 2022; originally announced September 2022.

Comments: 22 pages, 6 figures

Research status and prospect of graphene materials in aviation

Authors: S. Y. Gao, Y. F. Jiang, J. W. Sun, Z. H. Zhang

Abstract: Among various 2D materials, graphene has received extensive research attention in the past 2-30 years due to its fascinating properties. The discovery of graphene has provided a huge boost and a new dimension to materials research and nanotechnology. Many lightweight materials with good performance have been widely used in the aviation field, which has greatly promoted the development of military… ▽ More Among various 2D materials, graphene has received extensive research attention in the past 2-30 years due to its fascinating properties. The discovery of graphene has provided a huge boost and a new dimension to materials research and nanotechnology. Many lightweight materials with good performance have been widely used in the aviation field, which has greatly promoted the development of military and civilian industries and promoted technological innovation. Based on the introduction of the structure and properties of graphene, this paper summarizes the application value of graphene in the aerospace field in three aspects: energy equipment, sensors, and composite materials used outside aircraft. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Comments: (22 pages, 23 figures)

MSC Class: 31-02 ACM Class: A.1

An Atlas of Optimal Low-Thrust Rephasing Solutions in Circular Orbit

Authors: Di Wu, Fanghua Jiang, Hexi Baoyin

Abstract: In this paper, the time- and propellant-optimal low-thrust rephasing problems in circular orbit are studied to depict their solution spaces in an atlas. The number of key parameters that settle the rephasing problems is reduced by developing a set of linearized equations of motion based on the Sundman transformation and by formulating two reduced shooting functions using the minimum principle and… ▽ More In this paper, the time- and propellant-optimal low-thrust rephasing problems in circular orbit are studied to depict their solution spaces in an atlas. The number of key parameters that settle the rephasing problems is reduced by developing a set of linearized equations of motion based on the Sundman transformation and by formulating two reduced shooting functions using the minimum principle and symmetry properties. Only one key parameter is identified for the time-optimal problem, while two key parameters are obtained for the propellant-optimal one. Numerical investigation of the relationships between these parameters and shooting variables reveals that they can be depicted by some curve (or contour) maps and approximated by piecewise functions (or linear interpolations). For the relatively short- or long-term rephasing cases, some analytical time- and propellant-optimal solutions are proposed and consistent with the numerical solutions. Numerical results demonstrate that the proposed solutions can provide good initial guesses to solve the low-thrust rephasing problems with nonlinear dynamics. Moreover, the approximations of the performance indexes can be used in the preliminary mission design. △ Less

Submitted 17 August, 2022; originally announced September 2022.

High-dimensional Automated Radiation Therapy Treatment Planning via Bayesian Optimization

Authors: Qingying Wang, Ruoxi Wang, Jiacheng Liu, Fan Jiang, Haizhen Yue, Yi Du, Hao Wu

Abstract: Radiation therapy treatment planning can be viewed as an iterative hyperparameter tuning process to balance conflicting clinical goals. In this work, we investigated the performance of modern Bayesian Optimization (BO) methods on automated treatment planning problems in high-dimensional settings. 20 locally advanced rectal cancer patients treated with intensity-modulated radiation therapy (IMRT) w… ▽ More Radiation therapy treatment planning can be viewed as an iterative hyperparameter tuning process to balance conflicting clinical goals. In this work, we investigated the performance of modern Bayesian Optimization (BO) methods on automated treatment planning problems in high-dimensional settings. 20 locally advanced rectal cancer patients treated with intensity-modulated radiation therapy (IMRT) were retrospectively selected as test cases. We implemented an automated treatment planning framework that adjusts dose objectives and weights simultaneously, and tested the performance of two BO methods on the treatment planning task: one standard BO method (GPEI) and one BO method dedicated to high-dimensional problems (SAAS-BO). A random tuning method was also included as the baseline. We compared and analyzed the three automated methods' plan quality and planning efficiency and the different search patterns of the two BO methods. For the target structures, the SAAS-BO plans achieved comparable hot spot control ($p=0.43$) and homogeneity ($p=0.96$) with the clinical plans, significantly better than the GPEI and random plans ($p<0.05$). Both SAAS-BO and GPEI plans significantly outperformed the clinical plans in conformity and dose spillage ($p<0.05$). Compared with clinical plans, the treatment plans generated by the three automated methods all made reductions in evaluated dosimetric indices for the femoral head and the bladder. The analysis of the underlying predictive models has shown that both BO procedures have identified similar important planning parameters. This work implemented a BO-based hyperparameter tuning framework for automated treatment planning. Both tested BO methods were able to produce high-quality treatment plans and the model analysis also confirmed the intrinsic low dimensionality of the tested treatment planning problems. △ Less

Submitted 14 February, 2023; v1 submitted 22 May, 2022; originally announced May 2022.

A universal training scheme and the resulting universality for machine learning phases

Authors: Y. -H. Yseng, F. -J. Jiang, C. -Y. Huang

Abstract: An autoencoder (AE) and a generative adversarial networks (GANs) are trained only once on a one-dimensional (1D) lattice of 200 sites. Moreover, the AE contains only one hidden layer consisting of two neurons and both the generator and the discriminator of the GANs are made up of two neurons as well. The training set employed to train both the considered unsupervised neural networks (NN) is compos… ▽ More An autoencoder (AE) and a generative adversarial networks (GANs) are trained only once on a one-dimensional (1D) lattice of 200 sites. Moreover, the AE contains only one hidden layer consisting of two neurons and both the generator and the discriminator of the GANs are made up of two neurons as well. The training set employed to train both the considered unsupervised neural networks (NN) is composed of two artificial configurations. Remarkably, despite their simple architectures, both the built AE and GANs have precisely determined the critical points of several models, including the three-dimensional (3D) classical $O(3)$ model, the two-dimensional (2D) generalized classical XY model, the 2D two-state Potts model, and the 1D Bose-Hubbard model. The results presented here as well as that shown in {\it Eur. Phys. J. Plus {\bf 136}, 1116 (2021)} suggest that when phase transitions are considered, an elegant universal neural network that is extremely efficient and is applicable to broad physical systems can be constructed with ease. In particular, since a NN trained with two configurations can be applied to many models, it is likely that when machine learning is concerned, the majority of phase transitions belong to a class having two elements, i.e. the Ising class. △ Less

Submitted 17 May, 2022; v1 submitted 6 May, 2022; originally announced May 2022.

Comments: 17 pages, 11 figures, more references added

Neural network evidence of a weakly first order phase transition for the two-dimensional 5-state Potts model

Authors: Yuan-Heng Tseng, Yun-Hsuan Tseng, Fu-Jiun Jiang

Abstract: A universal (supervised) neural network (NN), which is only trained once on a one-dimensional lattice of 200 sites, is employed to study the phase transition of the two-dimensional (2D) 5-state ferromagnetic Potts model on the square lattice. In particular, the NN is obtained by using merely two artificially made configurations as the training set. Due to the elegant features of the considered NN,… ▽ More A universal (supervised) neural network (NN), which is only trained once on a one-dimensional lattice of 200 sites, is employed to study the phase transition of the two-dimensional (2D) 5-state ferromagnetic Potts model on the square lattice. In particular, the NN is obtained by using merely two artificially made configurations as the training set. Due to the elegant features of the considered NN, results associated with systems consisting of over 4000000 spins can be obtained with ease, and convincing evidence showing the investigated phase transition is weakly first order is reached. The outcomes demonstrated here can hardly be achieved with the standard NNs that are commonly used in the literature. △ Less

Submitted 28 November, 2021; originally announced November 2021.

Comments: 6 pages, 4 figures

Berezinskii--Kosterlitz--Thouless transition -- a universal neural network study with benchmarking

Authors: Y. -H. Tseng, F. -J. Jiang

Abstract: Using a supervised neural network (NN) trained once on a one-dimensional lattice of 200 sites, we calculate the Berezinskii--Kosterlitz--Thouless phase transitions of the two-dimensional (2D) classical $XY$ and the 2D generalized classical $XY$ models. In particular, both the bulk quantities Binder ratios and the spin states of the studied systems are employed to construct the needed configuration… ▽ More Using a supervised neural network (NN) trained once on a one-dimensional lattice of 200 sites, we calculate the Berezinskii--Kosterlitz--Thouless phase transitions of the two-dimensional (2D) classical $XY$ and the 2D generalized classical $XY$ models. In particular, both the bulk quantities Binder ratios and the spin states of the studied systems are employed to construct the needed configurations for the NN prediction. By applying semiempirical finite-size scaling to the relevant data, the critical points obtained by the NN approach agree well with the known results established in the literature. This implies that for each of the considered models, the determination of its various phases requires only a little information. The outcomes presented here demonstrate convincingly that the employed universal NN is not only valid for the symmetry breaking related phase transitions, but also works for calculating the critical points of the phase transitions associated with topology. The efficiency of the used NN in the computation is examined by carrying out several detailed benchmark calculations. △ Less

Submitted 4 October, 2021; originally announced October 2021.

Comments: 14 pages, 26 figures

An even-load-distribution design for composite bolted joints using a novel circuit model and artificial neural networks

Authors: Cheng Qiu, Yuzi Han, Logesh Shanmugam, Fengyang Jiang, Zhidong Guan, Shanyi Du, Jinglei Yang

Abstract: Due to the brittle feature of carbon fiber reinforced plastic laminates, mechanical multi-joint within these composite components show uneven load distribution for each bolt, which weaken the strength advantage of composite laminates. In order to reduce this defect and achieve the goal of even load distribution in mechanical joints, we propose a machine learning-based framework as an optimization… ▽ More Due to the brittle feature of carbon fiber reinforced plastic laminates, mechanical multi-joint within these composite components show uneven load distribution for each bolt, which weaken the strength advantage of composite laminates. In order to reduce this defect and achieve the goal of even load distribution in mechanical joints, we propose a machine learning-based framework as an optimization method. Since that the friction effect has been proven to be a significant factor in determining bolt load distribution, our framework aims at providing optimal parameters including bolt-hole clearances and tightening torques for a minimum unevenness of bolt load. A novel circuit model is established to generate data samples for the training of artificial networks at a relatively low computational cost. A database for all the possible inputs in the design space is built through the machine learning model. The optimal dataset of clearances and torques provided by the database is validated by both the finite element method, circuit model, and an experimental measurement based on the linear superposition principle, which shows the effectiveness of this general framework for the optimization problem. Then, our machine learning model is further compared and worked in collaboration with commonly used optimization algorithms, which shows the potential of greatly increasing computational efficiency for the inverse design problem. △ Less

Submitted 15 May, 2021; originally announced May 2021.

Prediction of three-phase relative permeabilities of Berea sandstone using lattice Boltzmann method

Authors: Sheng Li, Fei Jiang, Bei Wei, Jian Hou, Haihu Liu

Abstract: Three-phase flows through a pore network of Berea sandstone are studied numerically under critical interfacial tension condition. Results show that the relative permeability of each fluid increases as its own saturation increases. The specific interfacial length between wetting and non-wetting fluids monotonously decreases with increasing the saturation of intermediate-wetting fluid, while the oth… ▽ More Three-phase flows through a pore network of Berea sandstone are studied numerically under critical interfacial tension condition. Results show that the relative permeability of each fluid increases as its own saturation increases. The specific interfacial length between wetting and non-wetting fluids monotonously decreases with increasing the saturation of intermediate-wetting fluid, while the other two specific interfacial lengths exhibit a non-monotonous variation. As the wetting (non-wetting) fluid becomes less wetting (non-wetting), the relative permeability of wetting fluid monotonously increases, while the other two relative permeabilities show a non-monotonous trend. Due to the presence of spreading layer, the specific interfacial length between wetting and non-wetting fluids always stabilizes at a low level. As the viscosity ratio of wetting (non-wetting) to intermediate-wetting fluids increases, the relative permeability of wetting (non-wetting) fluid increases. With the viscosity ratio deviating from unity, the phase interfaces become increasingly unstable, leading to an increased specific interfacial length. △ Less

Submitted 15 March, 2021; originally announced March 2021.

Lattice Boltzmann simulation of three-phase flows with moving contact lines on curved surfaces

Authors: Sheng Li, Yang Lu, Fei Jiang, Haihu Liu

Abstract: A numerical method for simulating three-phase flows with moving contact lines on arbitrarily complex surfaces is developed in the framework of lattice Boltzmann method. In this method, the immiscible three-phase flow is modeled through a multiple-relaxation-time color-gradient model, which not only allows for a full range of interfacial tensions but also produces stable outcomes for a wide range o… ▽ More A numerical method for simulating three-phase flows with moving contact lines on arbitrarily complex surfaces is developed in the framework of lattice Boltzmann method. In this method, the immiscible three-phase flow is modeled through a multiple-relaxation-time color-gradient model, which not only allows for a full range of interfacial tensions but also produces stable outcomes for a wide range of viscosity ratios. A characteristic line model is introduced to implement the wetting boundary condition, which is not only easy to implement but also able to handle arbitrarily complex boundaries with prescribed contact angles. The developed method is first validated by the simulation of a Janus droplet resting on a flat surface, a perfect Janus droplet deposited on a cylinder, and the capillary intrusion of ternary fluids for various viscosity ratios. It is then used to study a compound droplet subject to a uniform incoming flow passing through a multi-pillar structure, where three different values of surface wettability are considered. The simulated results show that the surface wettability has significant impact on the droplet dynamic behavior and final fluid distribution. △ Less

Submitted 9 February, 2021; originally announced February 2021.

Journal ref: Phys. Rev. E 104, 015310 (2021)

Excited state fluid mechanics and mathematical principles of separation and transition

Authors: Peng Yue, Jingping Xiao, Ke Xu, Ming Li, Feng Jiang, Yiyu Lu, Dewei Peng

Abstract: Transition and separation are difficult but important problems in the field of fluid mechanics. Hitherto, separation and transition problems have not been described accurately in mathematical terms, leading to design errors and prediction problems in fluid machine engineering. The nonlinear uncertainty involved in separation and transition makes it difficult to accurately analyze these phenomena u… ▽ More Transition and separation are difficult but important problems in the field of fluid mechanics. Hitherto, separation and transition problems have not been described accurately in mathematical terms, leading to design errors and prediction problems in fluid machine engineering. The nonlinear uncertainty involved in separation and transition makes it difficult to accurately analyze these phenomena using experimental methods. Thus, new ideas and methods are required for the mathematical prediction of fluid separation and transition. In this article, after an axiomatic treatment of fluid mechanics, the concept of an excited state is derived by generating a fluctuation velocity, and it is revealed that fluid separation and transition are special forms of this excited state. This allows us to clarify the state conditions of fluid separation and transition. Mathematical analysis of the Navier--Stokes equations leads to a general excited state theorem suitable for flowfields. Finally, the conditions of separation and transition are derived, and the corresponding general laws are established. The results presented in this article provide a foundation for future research on the mechanism of turbulence and the solution of engineering problems. △ Less

Submitted 16 April, 2021; v1 submitted 6 January, 2021; originally announced January 2021.

Comments: 19 pages

Machine learning phases and criticalities without using real data for training

Authors: D. -R. Tan, F. -J. Jiang

Abstract: We study the phase transitions of three-dimensional (3D) classical O(3) model and the two-dimensional (2D) classical XY model, as well as both the quantum phase transitions of 2D and 3D dimerized spin-1/2 antiferromagnets, using the techniques of supervised neural network (NN). Moreover, unlike the conventional approaches commonly used in the literature, the training sets employed in our investiga… ▽ More We study the phase transitions of three-dimensional (3D) classical O(3) model and the two-dimensional (2D) classical XY model, as well as both the quantum phase transitions of 2D and 3D dimerized spin-1/2 antiferromagnets, using the techniques of supervised neural network (NN). Moreover, unlike the conventional approaches commonly used in the literature, the training sets employed in our investigation are neither the theoretical nor the real configurations of the considered systems. Remarkably, with such an unconventional set up of the training stage in conjunction with semi-experimental finite-size scaling formulas, the associated critical points determined by the NN method agree well with the established results in the literature. The outcomes obtained here imply that certain unconventional training strategies, like the one used in this study, are not only cost-effective in computation, but are also applicable for a wild range of physical systems. △ Less

Submitted 10 August, 2020; v1 submitted 29 July, 2020; originally announced July 2020.

Comments: 14 pages and 33 figures; more references are added; the results of 2D classical XY model are included in this revised version

Journal ref: Phys. Rev. B 102, 224434 (2020)

Time Series Analysis of COVID-19 Infection Curve: A Change-Point Perspective

Authors: Feiyu Jiang, Zifeng Zhao, Xiaofeng Shao

Abstract: In this paper, we model the trajectory of the cumulative confirmed cases and deaths of COVID-19 (in log scale) via a piecewise linear trend model. The model naturally captures the phase transitions of the epidemic growth rate via change-points and further enjoys great interpretability due to its semiparametric nature. On the methodological front, we advance the nascent self-normalization (SN) tech… ▽ More In this paper, we model the trajectory of the cumulative confirmed cases and deaths of COVID-19 (in log scale) via a piecewise linear trend model. The model naturally captures the phase transitions of the epidemic growth rate via change-points and further enjoys great interpretability due to its semiparametric nature. On the methodological front, we advance the nascent self-normalization (SN) technique (Shao, 2010) to testing and estimation of a single change-point in the linear trend of a nonstationary time series. We further combine the SN-based change-point test with the NOT algorithm (Baranowski et al., 2019) to achieve multiple change-point estimation. Using the proposed method, we analyze the trajectory of the cumulative COVID-19 cases and deaths for 30 major countries and discover interesting patterns with potentially relevant implications for effectiveness of the pandemic responses by different countries. Furthermore, based on the change-point detection algorithm and a flexible extrapolation function, we design a simple two-stage forecasting scheme for COVID-19 and demonstrate its promising performance in predicting cumulative deaths in the U.S. △ Less

Submitted 9 July, 2020; originally announced July 2020.

Inertial torque on a small spheroid in a stationary uniform flow

Authors: F. Jiang, L. Zhao, H. I. Andersson, K. Gustavsson, A. Pumir, B. Mehlig

Abstract: How anisotropic particles rotate and orient in a flow depends on the hydrodynamic torque they experience. Here we compute the torque acting on a small spheroid in a uniform flow by numerically solving the Navier-Stokes equations. Particle shape is varied from oblate (aspect ratio $λ= 1/6$) to prolate ($λ= 6$), and we consider low and moderate particle Reynolds numbers (${\rm Re} \le 50$). We demon… ▽ More How anisotropic particles rotate and orient in a flow depends on the hydrodynamic torque they experience. Here we compute the torque acting on a small spheroid in a uniform flow by numerically solving the Navier-Stokes equations. Particle shape is varied from oblate (aspect ratio $λ= 1/6$) to prolate ($λ= 6$), and we consider low and moderate particle Reynolds numbers (${\rm Re} \le 50$). We demonstrate that the angular dependence of the torque, predicted theoretically for small particle Reynolds numbers remains qualitatively correct for Reynolds numbers up to ${\rm Re} \sim 10$. The amplitude of the torque, however, is smaller than the theoretical prediction, the more so as ${\rm Re}$ increases. For Re larger than $10$, the flow past oblate spheroids acquires a more complicated structure, resulting in systematic deviations from the theoretical predictions. Overall, our numerical results provide a justification of recent theories for the orientation statistics of ice-crystals settling in a turbulent flow. △ Less

Submitted 6 February, 2021; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 11 pages, 4 figures

Journal ref: Phys. Rev. Fluids 6 (2021) 024302

Machine Discovery of Partial Differential Equations from Spatiotemporal Data

Authors: Ye Yuan, Junlin Li, Liang Li, Frank Jiang, Xiuchuan Tang, Fumin Zhang, Sheng Liu, Jorge Goncalves, Henning U. Voss, Xiuting Li, Jürgen Kurths, Han Ding

Abstract: The study presents a general framework for discovering underlying Partial Differential Equations (PDEs) using measured spatiotemporal data. The method, called Sparse Spatiotemporal System Discovery ($\text{S}^3\text{d}$), decides which physical terms are necessary and which can be removed (because they are physically negligible in the sense that they do not affect the dynamics too much) from a poo… ▽ More The study presents a general framework for discovering underlying Partial Differential Equations (PDEs) using measured spatiotemporal data. The method, called Sparse Spatiotemporal System Discovery ($\text{S}^3\text{d}$), decides which physical terms are necessary and which can be removed (because they are physically negligible in the sense that they do not affect the dynamics too much) from a pool of candidate functions. The method is built on the recent development of Sparse Bayesian Learning; which enforces the sparsity in the to-be-identified PDEs, and therefore can balance the model complexity and fitting error with theoretical guarantees. Without leveraging prior knowledge or assumptions in the discovery process, we use an automated approach to discover ten types of PDEs, including the famous Navier-Stokes and sine-Gordon equations, from simulation data alone. Moreover, we demonstrate our data-driven discovery process with the Complex Ginzburg-Landau Equation (CGLE) using data measured from a traveling-wave convection experiment. Our machine discovery approach presents solutions that has the potential to inspire, support and assist physicists for the establishment of physical laws from measured spatiotemporal data, especially in notorious fields that are often too complex to allow a straightforward establishment of physical law, such as biophysics, fluid dynamics, neuroscience or nonlinear optics. △ Less

Submitted 15 September, 2019; originally announced September 2019.

Instabilities in the wake of an inclined prolate spheroid

Authors: Helge I. Andersson, Fengjian Jiang, Valery L. Okulov

Abstract: We investigate the instabilities, bifurcations and transition in the wake behind a 45-degree inclined 6:1 prolate spheroid, through a series of direct numerical simulations (DNS) over a wide range of Reynolds numbers (Re) from 10 to 3000. We provide a detailed picture of how the originally symmetric and steady laminar wake at low Re gradually looses its symmetry and turns unsteady as Re is gradual… ▽ More We investigate the instabilities, bifurcations and transition in the wake behind a 45-degree inclined 6:1 prolate spheroid, through a series of direct numerical simulations (DNS) over a wide range of Reynolds numbers (Re) from 10 to 3000. We provide a detailed picture of how the originally symmetric and steady laminar wake at low Re gradually looses its symmetry and turns unsteady as Re is gradually increased. Several fascinating flow features have first been revealed and subsequently analysed, e.g. an asymmetric time-averaged flow field, a surprisingly strong side force etc. As the wake partially becomes turbulent, we investigate a dominating coherent wake structure, namely a helical vortex tube, inside of which a helical symmetry alteration scenario was recovered in the intermediate wake, together with self-similarity in the far wake. △ Less

Submitted 7 April, 2018; originally announced April 2018.

Comments: Book chapter in "Computational Modeling of Bifurcations and Instabilities in Fluid Dynamics (A. Gelfgat ed.)", Springer

Numerical methods for spin-dependent transport calculations and spin bound states analysis in Rashba waveguides

Authors: Hang Xie, Feng Jiang, Wei E. I. Sha

Abstract: Numerical methods are developed in the quantum transport calculations for electron in the waveguides with spin-orbital (Rashba) interaction. The methods are based on a hybrid mode-matching scheme in which the wavefunctions are expressed as the superposition of eigenmodes in the lead regions and in the device region the wavefunction is expressed on the discrete basis. Two versions are presented for… ▽ More Numerical methods are developed in the quantum transport calculations for electron in the waveguides with spin-orbital (Rashba) interaction. The methods are based on a hybrid mode-matching scheme in which the wavefunctions are expressed as the superposition of eigenmodes in the lead regions and in the device region the wavefunction is expressed on the discrete basis. Two versions are presented for the lead without and with the Rashba interaction. In the latter case the eigenmodes are obtained from a quadratic eigenproblem calculation. These methods are suitable for the systems with variable geometries or arbitrary potential profiles. The computation can be effectively accelerated by the sparse matrix technique. We also investigate the Fano-Rashba bound states in the Rashba waveguides by some nonlinear eigenstate calculation. This calculation is based on a mode-matching method and self-consistent results are obtained in our calculations. △ Less

Submitted 7 September, 2015; originally announced September 2015.

Comments: 20 pages with 6 figures

Radiation and Ionization Energy Loss Simulation for GDH Sum Rule Experiment in Hall-A at Jefferson Lab

Authors: Xin-Hu Yan, Yun-Xiu Ye Jian-Ping Chen, Hai-Jiang LV, Pengjia Zhu, Fengjian Jiang

Abstract: The radiation and ionization energy loss are presented for single arm Monte Carlo simulation for the GDH sum rule experiment in Hall-A at Jefferson Lab. Radiation and ionization energy loss are discussed for $^{12}C$ elastic scattering simulation. The relative momentum ratio $\frac{Δp}{p}$ and $^{12}C$ elastic cross section are compared without and with Radiation Energy Loss and a reasonable shape… ▽ More The radiation and ionization energy loss are presented for single arm Monte Carlo simulation for the GDH sum rule experiment in Hall-A at Jefferson Lab. Radiation and ionization energy loss are discussed for $^{12}C$ elastic scattering simulation. The relative momentum ratio $\frac{Δp}{p}$ and $^{12}C$ elastic cross section are compared without and with Radiation Energy Loss and a reasonable shape is obtained by the simulation. The total energy loss distribution is obtained, showing a Landau shape for $^{12}C$ elastic scattering. This simulation work will give good support for radiation correction analysis of the GDH sum rule experiment. △ Less

Submitted 16 December, 2014; v1 submitted 5 October, 2014; originally announced October 2014.

Complex absorbing potential based Lorentzian fitting scheme and time dependent quantum transport

Authors: Hang Xie, Yanho Kwok, Feng Jiang, Xiao Zheng, GuanHua Chen

Abstract: Based on the complex absorbing potential (CAP) method, a Lorentzian expansion scheme is developed to express the self-energy. The CAP-based Lorentzian expansion of self-energy is employed to solve efficiently the Liouville-von Neumann equation of one-electron density matrix. The resulting method is applicable for both tight-binding and first-principles models, and is used to simulate the transient… ▽ More Based on the complex absorbing potential (CAP) method, a Lorentzian expansion scheme is developed to express the self-energy. The CAP-based Lorentzian expansion of self-energy is employed to solve efficiently the Liouville-von Neumann equation of one-electron density matrix. The resulting method is applicable for both tight-binding and first-principles models, and is used to simulate the transient currents through graphene nanoribbons and a benzene molecule sandwiched between two carbon-atom-chains. △ Less

Submitted 16 September, 2014; originally announced September 2014.

Comments: This paper is about a methodology development on the time dependent quantum transport theory. It has 22 pages and 6 figures

Structure of local interactions in complex financial dynamics

Authors: X. F. Jiang, T. T. Chen, B. Zheng

Abstract: With the network methods and random matrix theory, we investigate the interaction structure of communities in financial markets. In particular, based on the random matrix decomposition, we clarify that the local interactions between the business sectors (subsectors) are mainly contained in the sector mode. In the sector mode, the average correlation inside the sectors is positive, while that betwe… ▽ More With the network methods and random matrix theory, we investigate the interaction structure of communities in financial markets. In particular, based on the random matrix decomposition, we clarify that the local interactions between the business sectors (subsectors) are mainly contained in the sector mode. In the sector mode, the average correlation inside the sectors is positive, while that between the sectors is negative. Further, we explore the time evolution of the interaction structure of the business sectors, and observe that the local interaction structure changes dramatically during a financial bubble or crisis. △ Less

Submitted 31 May, 2014; originally announced June 2014.

Comments: 15 pages, 10 figures, accepted by Scientific Reports

Journal ref: Scientific Reports,4 (2014) 5321

Spatial and temporal structures of four financial markets in Greater China

Authors: F. Y. Ouyang, B. Zheng, X. F. Jiang

Abstract: We investigate the spatial and temporal structures of four financial markets in Greater China. In particular, we uncover different characteristics of the four markets by analyzing the sector and subsector structures which are detected through the random matrix theory. Meanwhile, we observe that the Taiwan and Hongkong stock markets show a negative return-volatility correlation, i.e., the so-called… ▽ More We investigate the spatial and temporal structures of four financial markets in Greater China. In particular, we uncover different characteristics of the four markets by analyzing the sector and subsector structures which are detected through the random matrix theory. Meanwhile, we observe that the Taiwan and Hongkong stock markets show a negative return-volatility correlation, i.e., the so-called leverage effect. The Shanghai and Shenzhen stock markets are more complicated. Before the year 2000, the two markets exhibit a strong positive return-volatility correlation, which is called the anti-leverage effect. After 2000, however, it gradually changes to the leverage effect. We also find that the recurrence interval distributions of both the trading volume volatilities and price volatilities follow a power law behavior, while the exponents vary among different markets. △ Less

Submitted 5 February, 2014; originally announced February 2014.

Comments: 7 figures. Accepted by Physica A

Journal ref: Physica A: Statistical Mechanics and its Applications Volume 402, 2014, Pages 236

Time-reversal asymmetry in financial systems

Authors: X. F. Jiang, T. T. Chen, B. Zheng

Abstract: We investigate the large-fluctuation dynamics in financial markets, based on the minute-to-minute and daily data of the Chinese Indices and German DAX. The dynamic relaxation both before and after the large fluctuations is characterized by a power law, and the exponents $p_\pm$ usually vary with the strength of the large fluctuations. The large-fluctuation dynamics is time-reversal symmetric at th… ▽ More We investigate the large-fluctuation dynamics in financial markets, based on the minute-to-minute and daily data of the Chinese Indices and German DAX. The dynamic relaxation both before and after the large fluctuations is characterized by a power law, and the exponents $p_\pm$ usually vary with the strength of the large fluctuations. The large-fluctuation dynamics is time-reversal symmetric at the time scale in minutes, while asymmetric at the daily time scale. Careful analysis reveals that the time-reversal asymmetry is mainly induced by external forces. It is also the external forces which drive the financial system to a non-stationary state. Different characteristics of the Chinese and German stock markets are uncovered. △ Less

Submitted 3 August, 2013; originally announced August 2013.

Comments: 17 pages, 8 figures, Accepted by Physica A. arXiv admin note: substantial text overlap with arXiv:1002.3747

Journal ref: Physica A, Volume 392, Issue 21, 1 November 2013, Pages 5369-5375

Anti-correlation and subsector structure in financial systems

Authors: X. F. Jiang, B. Zheng

Abstract: With the random matrix theory, we study the spatial structure of the Chinese stock market, American stock market and global market indices. After taking into account the signs of the components in the eigenvectors of the cross-correlation matrix, we detect the subsector structure of the financial systems. The positive and negative subsectors are anti-correlated each other in the corresponding eige… ▽ More With the random matrix theory, we study the spatial structure of the Chinese stock market, American stock market and global market indices. After taking into account the signs of the components in the eigenvectors of the cross-correlation matrix, we detect the subsector structure of the financial systems. The positive and negative subsectors are anti-correlated each other in the corresponding eigenmode. The subsector structure is strong in the Chinese stock market, while somewhat weaker in the American stock market and global market indices. Characteristics of the subsector structures in different markets are revealed. △ Less

Submitted 30 January, 2012; originally announced January 2012.

Comments: 6 pages, 2 figures, 4 tables

Journal ref: EPL, 97 (2012) 48006

Large-volatility dynamics in financial markets

Authors: X. F. Jiang, B. Zheng, J. Shen

Abstract: We investigate the large-volatility dynamics in financial markets, based on the minute-to-minute and daily data of the Chinese Indices and German DAX. The dynamic relaxation both before and after large volatilities is characterized by a power law, and the exponents $p_\pm$ usually vary with the strength of the large volatilities. The large-volatility dynamics is time-reversal symmetric at the time… ▽ More We investigate the large-volatility dynamics in financial markets, based on the minute-to-minute and daily data of the Chinese Indices and German DAX. The dynamic relaxation both before and after large volatilities is characterized by a power law, and the exponents $p_\pm$ usually vary with the strength of the large volatilities. The large-volatility dynamics is time-reversal symmetric at the time scale in minutes, while asymmetric at the daily time scale. Careful analysis reveals that the time-reversal asymmetry is mainly induced by exogenous events. It is also the exogenous events which drive the financial dynamics to a non-stationary state. Different characteristics of the Chinese and German stock markets are uncovered. △ Less

Submitted 25 March, 2011; v1 submitted 19 February, 2010; originally announced February 2010.

New determination of structure parameters in strong field tunneling ionization theory of molecules

Authors: Song-Feng Zhao, Cheng Jin, Anh-Thu Le, T. F. Jiang, C. D. Lin

Abstract: In the strong field molecular tunneling ionization theory of Tong et al. [Phys. Rev. A 66, 033402 (2002)], the ionization rate depends on the asymptotic wavefunction of the molecular orbital from which the electron is removed. The orbital wavefunctions obtained from standard quantum chemistry packages in general are not good enough in the asymptotic region. Here we construct a one-electron model… ▽ More In the strong field molecular tunneling ionization theory of Tong et al. [Phys. Rev. A 66, 033402 (2002)], the ionization rate depends on the asymptotic wavefunction of the molecular orbital from which the electron is removed. The orbital wavefunctions obtained from standard quantum chemistry packages in general are not good enough in the asymptotic region. Here we construct a one-electron model potential for several linear molecules using density functional theory (DFT). We show that the asymptotic wavefunction can be improved with an iteration method and after one iteration accurate asymptotic wavefunctions and structure parameters are determined. With the new parameters we examine the alignment-dependent tunneling ionization probabilities for several molecules and compare with other calculations and with recent measurements, including ionization from inner molecular orbitals. △ Less

Submitted 21 January, 2010; originally announced January 2010.