-
A nonlinear room mode determines the operating conditions of a large-cavity synthetic jet actuator at low frequencies
Authors:
L. F. Olivera-Reyes,
E. S. Palacios de Paz,
S. Sánchez,
J. F. Hernández-Sánchez
Abstract:
Synthetic Jet (SJ) actuators are an intrinsically complex combination of electronics, electric and mechanical systems. When studied theoretically, these elements are often simplified to coupled damped harmonic oscillators (DHO) that induce a pressure field within the cavity and drive momentum exchange. Thus, the performance of an SJ actuator results from coupling these DHOs, naturally leading to a…
▽ More
Synthetic Jet (SJ) actuators are an intrinsically complex combination of electronics, electric and mechanical systems. When studied theoretically, these elements are often simplified to coupled damped harmonic oscillators (DHO) that induce a pressure field within the cavity and drive momentum exchange. Thus, the performance of an SJ actuator results from coupling these DHOs, naturally leading to a few resonant modes. There is good evidence in the specialized literature of two resonant modes developing in SJ actuators: the membrane/piezoelectric mode and the Helmholtz resonance. In this work, we report on the effect of a third resonant mode that develops at very low frequencies due to a cavity much larger than the volume displaced by the actuator. We present evidence that the large-cavity dynamics determine the SJ performance in combination with the well-described formation criteria. We compare the intensity of this resonant mode with the first room modes using standard frequency analysis. Unlike typical room modes, the distribution of this resonant mode is very biased to lower frequencies. We also show that the resonant mode may be dimmed and focused by adding an obstacle in different cavity positions for the lower sound intensities. This mode overcomes the Helmholtz resonance, dominating the dynamics for higher sound intensities. We show that jet and vortex velocities mimic the sound pressure curve for the low-frequency range. Its effect mitigates for the higher range due to a delve through smaller stroke lengths, characterized as a fixed relation between the Reynolds and the Stokes numbers. We consider that the large-cavity dynamics is an additional element that, if integrated as design criteria, could extend the optimum frequency response of SJs.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Momentum transfer in the outflow cycle of a Synthetic jet: Comparison between a developed flow and an LE model
Authors:
J. F. Hernández-Sánchez,
F. Orduña-Bustamante,
R. Velasco-Segura
Abstract:
In the literature, flows produced by synthetic jets (SJ) have been studied extensively through experiments and numeric simulations. The essential physics of such a complex system has been simplified successfully to Lumped-element models in a wide range of conditions. LE models effectively predict the pressure in the cavity and the velocity in the neck of SJ. But, this does not comprise the complet…
▽ More
In the literature, flows produced by synthetic jets (SJ) have been studied extensively through experiments and numeric simulations. The essential physics of such a complex system has been simplified successfully to Lumped-element models in a wide range of conditions. LE models effectively predict the pressure in the cavity and the velocity in the neck of SJ. But, this does not comprise the complete dynamics of SJ. As soon as the flow starts separating from the neck of the SJ device, vortices and jets form at some distance downstream. These structures are the result of loosening the flow boundaries. Despite such a dramatic change, predictions of LE models remain unverified by measurements of the fully developed jet. We compared predictions of momentum transfer using an LE model with measurements of size and velocity of a fully developed jet/vortex detached from an SJ. Our SJ device operated with air as an active fluid. Comparing measurements and predictions, we found a constant difference for the higher sound pressures. However, the predictions and the measurements follow similar trends. Additionally, we found that the decay rate of the flow regime given by the relationship between the Reynolds and the Strouhal numbers differs significantly when the flow is studied within the neck and downstream the cavity.
△ Less
Submitted 28 June, 2021;
originally announced June 2021.
-
Bacterial Footprints in Elastic Pillared Microstructures
Authors:
Arturo Susarrey-Arce,
Jose Federico Hernandez-Sanchez,
Marco Marcello,
Yuri Diaz-Fernandez,
Alina Oknianska,
Ioritz Sorzabal-Bellido,
Roald Tiggelaar,
Detlef Lohse,
Han Gardeniers,
Jacco Snoeijer,
Alvaro Marin,
Rasmita Raval
Abstract:
Soft substrates decorated with micropillar arrays are known to be sensitive to deflection due to capillary action. In this work, we demonstrate micropillared epoxy surfaces are sensitive to single drops of bacterial suspensions. The micropillars can show significant deformations upon evaporation, just as capillary action does in soft substrates. The phenomenon has been studied with five bacterial…
▽ More
Soft substrates decorated with micropillar arrays are known to be sensitive to deflection due to capillary action. In this work, we demonstrate micropillared epoxy surfaces are sensitive to single drops of bacterial suspensions. The micropillars can show significant deformations upon evaporation, just as capillary action does in soft substrates. The phenomenon has been studied with five bacterial strains S. epidermidis, L. sakei, P. aeruginosa, E. coli and B. subtilis. The results reveal that only droplets containing motile microbes with flagella stimulate micropillar bending, which leads to significant distortions and pillar aggregations forming dimers, trimers, and higher order clusters. Such deformation is manifested in characteristic patterns that are left on the microarrayed surface following evaporation, and can be easily identified even by the naked eye. Our findings could lay the ground for the design and fabrication of mechanically responsive substrates, sensitive to specific types of microorganisms.
△ Less
Submitted 14 September, 2019;
originally announced October 2019.
-
Bubbles determine the amount of alcohol in Mezcal
Authors:
G. Rage,
O. Atasi,
M. M. Wilhelmus,
J. F. Hernández-Sánchez,
B. Haut,
B. Scheid,
D. Legendre,
R. Zenit
Abstract:
Mezcal is a traditional alcoholic Mexican spirit distilled from fermented agave juices that has been produced for centuries. Its preparation and testing involves an artisanal method to determine the alcohol content based on pouring a stream of the liquid into a small vessel: if the alcohol content is correct, stable bubbles, known as pearls, form at the surface and remain floating for some time. I…
▽ More
Mezcal is a traditional alcoholic Mexican spirit distilled from fermented agave juices that has been produced for centuries. Its preparation and testing involves an artisanal method to determine the alcohol content based on pouring a stream of the liquid into a small vessel: if the alcohol content is correct, stable bubbles, known as pearls, form at the surface and remain floating for some time. It has been hypothesized that an increase in bubble lifetime results from a decrease in surface tension due to added surfactants. However, the precise mechanism for extended lifetime remains unexplained. By conducting experiments and numerical simulations, we studied the extended lifetime of pearls. It was found that both changes in fluid properties (resulting from mixing ethanol and water) and the presence of surfactants are needed to observe pearls with a long lifetime. Moreover, we found that the dimensionless lifetime of a bubble first increases with the Bond number, until reaching a maximum at $Bo\approx 1$, and then continuously decreases. Our findings on bubble stability in Mezcal not only explain the effectiveness of the artisanal method, but it also provides insight to other fields where floating bubbles are relevant such as in oceanic foam, bio-foams, froth flotation and magma flows.
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
Marangoni spreading due to a localized alcohol supply on a thin water film
Authors:
José Federico Hernández-Sánchez,
Antonin Eddi,
J. H. Snoeijer
Abstract:
Bringing the interfaces of two miscible fluids into contact naturally generates strong gradients in surface tension. Here we investigate such a Marangoni-driven flow by continuously supplying isopropyl alcohol (IPA) on a film of water, using micron-sized droplets of IPA-water mixtures. These droplets create a localized depression in surface tension that leads to the opening of a circular and thin…
▽ More
Bringing the interfaces of two miscible fluids into contact naturally generates strong gradients in surface tension. Here we investigate such a Marangoni-driven flow by continuously supplying isopropyl alcohol (IPA) on a film of water, using micron-sized droplets of IPA-water mixtures. These droplets create a localized depression in surface tension that leads to the opening of a circular and thin region in the water film. At the edge of the thin region, there is a rim growing and collecting the water of the film. We find that the spreading radius scales as $r \sim t^{1/2}$. This result can be explained from a balance between Marangoni and viscous stresses, assuming that the gradients in surface tension are smoothened out over the entire size of the circular opening. We derive a scaling law that accurately predicts the influence of the IPA flux as well as the thickness of the thin film at the interior of the spreading front.
△ Less
Submitted 23 December, 2013;
originally announced December 2013.
-
Symmetric and Asymmetric Coalescence of Drops on a Substrate
Authors:
J. F. Hernandez-Sanchez,
L. A. Lubbers,
A. Eddi,
J. H. Snoeijer
Abstract:
The coalescence of viscous drops on a substrate is studied experimentally and theoretically. We consider cases where the drops can have different contact angles, leading to a very asymmetric coalescence process. Side view experiments reveal that the "bridge" connecting the drops evolves with self-similar dynamics, providing a new perspective on the coalescence of sessile drops. We show that the un…
▽ More
The coalescence of viscous drops on a substrate is studied experimentally and theoretically. We consider cases where the drops can have different contact angles, leading to a very asymmetric coalescence process. Side view experiments reveal that the "bridge" connecting the drops evolves with self-similar dynamics, providing a new perspective on the coalescence of sessile drops. We show that the universal shape of the bridge is accurately described by similarity solutions of the one-dimensional lubrication equation. Our theory predicts a bridge that grows linearly in time and stresses the strong dependence on the contact angles. Without any adjustable parameters, we find quantitative agreement with all experimental observations.
△ Less
Submitted 11 July, 2012;
originally announced July 2012.