-
Flexible Stellarator Physics Facility
Authors:
F. I. Parra,
S. -G. Baek,
M. Churchill,
D. R. Demers,
B. Dudson,
N. M. Ferraro,
B. Geiger,
S. Gerhardt,
K. C. Hammond,
S. Hudson,
R. Jorge,
E. Kolemen,
D. M. Kriete,
S. T. A. Kumar,
M. Landreman,
C. Lowe,
D. A. Maurer,
F. Nespoli,
N. Pablant,
M. J. Pueschel,
A. Punjabi,
J. A. Schwartz,
C. P. S. Swanson,
A. M. Wright
Abstract:
We propose to build a Flexible Stellarator Physics Facility to explore promising regions of the vast parameter space of disruption-free stellarator solutions for Fusion Pilot Plants (FPPs).
We propose to build a Flexible Stellarator Physics Facility to explore promising regions of the vast parameter space of disruption-free stellarator solutions for Fusion Pilot Plants (FPPs).
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Improved stellarator permanent magnet designs through combined discrete and continuous optimizations
Authors:
K. C. Hammond,
A. A. Kaptanoglu
Abstract:
A common optimization problem in the areas of magnetized plasmas and fusion energy is the design of magnets to produce a given three-dimensional magnetic field distribution to high precision. When designing arrays of permanent magnets for stellarator plasma confinement, such problems have tens of thousands of degrees of freedom whose solutions, for practical reasons, should be constrained to discr…
▽ More
A common optimization problem in the areas of magnetized plasmas and fusion energy is the design of magnets to produce a given three-dimensional magnetic field distribution to high precision. When designing arrays of permanent magnets for stellarator plasma confinement, such problems have tens of thousands of degrees of freedom whose solutions, for practical reasons, should be constrained to discrete spaces. We perform a direct comparison between two algorithms that have been developed previously for this purpose, and demonstrate that composite procedures that apply both algorithms in sequence can produce substantially improved results. One approach uses a continuous, quasi-Newton procedure to optimize the dipole moments of a set of magnets and then projects the solution onto a discrete space. The second uses an inherently discrete greedy optimization procedure that has been enhanced and generalized for this work. The approaches are both applied to design arrays cubic rare-Earth permanent magnets to confine a quasi-axisymmetric plasma with a magnetic field on axis of 0.5 T. The first approach tends to find solutions with higher field accuracy, whereas the second can find solutions with substantially (up to 30%) fewer magnets. When the approaches are combined, they can obtain solutions with magnet quantities comparable to the second approach while matching the field accuracy of the first.
△ Less
Submitted 16 February, 2024; v1 submitted 29 September, 2023;
originally announced September 2023.
-
Design of an arrangement of cubic magnets for a quasi-axisymmetric stellarator experiment
Authors:
K. C. Hammond,
C. Zhu,
K. Corrigan,
D. A. Gates,
R. Lown,
R. Mercurio,
T. M. Qian,
M. C. Zarnstorff
Abstract:
The usage of permanent magnets to shape the confining magnetic field of a stellarator has the potential to reduce or eliminate the need for non-planar coils. As a proof-of-concept for this idea, we have developed a procedure for designing an array of cubic permanent magnets that works in tandem with a set of toroidal-field coils to confine a stellarator plasma. All of the magnets in the design are…
▽ More
The usage of permanent magnets to shape the confining magnetic field of a stellarator has the potential to reduce or eliminate the need for non-planar coils. As a proof-of-concept for this idea, we have developed a procedure for designing an array of cubic permanent magnets that works in tandem with a set of toroidal-field coils to confine a stellarator plasma. All of the magnets in the design are constrained to have identical geometry and one of three polarization types in order to simplify fabrication while still producing sufficient field accuracy. We present some of the key steps leading to the design, including the geometric arrangement of the magnets around the device, the procedure for optimizing the polarizations according to the three allowable magnet types, and the choice of magnet types to be used. We apply these methods to design an array of rare-Earth permanent magnets that can be paired with a set of planar toroidal-field coils to confine a quasi-axisymmetric plasma with a toroidal magnetic field strength of about 0.5 T on axis.
△ Less
Submitted 16 November, 2022; v1 submitted 15 April, 2022;
originally announced April 2022.
-
Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device
Authors:
K. C. Hammond,
F. M. Laggner,
A. Diallo,
S. Doskoczynski,
C. Freeman,
H. Funaba,
D. A. Gates,
R. Rozenblat,
G. Tchilinguirian,
Z. Xing,
I. Yamada,
R. Yasuhara,
G. Zimmer,
E. Kolemen
Abstract:
A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four s…
▽ More
A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system's rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.
△ Less
Submitted 23 June, 2021; v1 submitted 9 January, 2021;
originally announced January 2021.
-
Geometric concepts for stellarator permanent magnet arrays
Authors:
K. C. Hammond,
C. Zhu,
T. Brown,
K. Corrigan,
D. A. Gates,
M. Sibilia
Abstract:
The development of stellarators that use permanent magnet arrays to shape their confining magnetic fields has been a topic of recent interest, but the requirements for how such magnets must be shaped, manufactured, and assembled remain to be determined. To address these open questions, we have performed a study of geometric concepts for magnet arrays with the aid of the newly developed MAGPIE code…
▽ More
The development of stellarators that use permanent magnet arrays to shape their confining magnetic fields has been a topic of recent interest, but the requirements for how such magnets must be shaped, manufactured, and assembled remain to be determined. To address these open questions, we have performed a study of geometric concepts for magnet arrays with the aid of the newly developed MAGPIE code. A proposed experiment similar to the National Compact Stellarator Experiment (NCSX) is used as a test case. Two classes of magnet geometry are explored: curved bricks that conform to a regular grid in cylindrical coordinates, and hexahedra that conform to the toroidal plasma geometry. In addition, we test constraints on the magnet polarization. While magnet configurations constrained to be polarized normally to a toroidal surface around the plasma are unable to meet the required magnetic field parameters when subject to physical limitations on the strength of present-day magnets, configurations with unconstrained polarizations are shown to satisfy the physics requirements for a targeted plasma.
△ Less
Submitted 12 August, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
Topology optimization of permanent magnets for stellarators
Authors:
Caoxiang Zhu,
Kenneth Hammond,
Thomas Brown,
David Gates,
Michael Zarnstorff,
Keith Corrigan,
Marc Sibilia,
Eliot Feibush
Abstract:
We introduce a topology optimization method to design permanent magnets for advanced stellarators. Recent researches show that permanent magnets have great potentials to simplify stellarator coils. We adopt state-of-the-art numerical techniques to determine the presence of magnets in the entire designing space. The FAMUS code is developed and it can design engineering-feasible permanent magnets fo…
▽ More
We introduce a topology optimization method to design permanent magnets for advanced stellarators. Recent researches show that permanent magnets have great potentials to simplify stellarator coils. We adopt state-of-the-art numerical techniques to determine the presence of magnets in the entire designing space. The FAMUS code is developed and it can design engineering-feasible permanent magnets for general stellarators satisfying the constraints of the maximum material magnetization and explicitly forbidden regions. FAMUS has been successfully verified against the previously proposed linear method. Three different permanent magnet designs together with planar TF coils for a half-Tesla NCSX configuration have been obtained for demonstrations. The designs have good accuracy in generating the desired equilibrium and offer considerably large plasma access on the outboard side. The results show that FAMUS is a flexible, advanced numerical tool for future permanent magnet stellarator designs.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Heat and particle flux detachment with stable plasma conditions in the Wendelstein 7-X stellarator fusion experiment
Authors:
Marcin Jakubowski,
Ralf König,
Oliver Schmitz,
Yuhe Feng,
Maciej Krychowiak,
Matthias Otte,
Felix Reimold,
Andreas Dinklage,
Peter Drewelow,
Florian Effenberg,
Yu Gao,
Holger Niemann,
Georg Schlisio,
Andrea Pavone,
Thomas Sunn Pedersen,
Uwe Wenzel,
Daihong Zhang,
Sebastijan Brezinsek,
Sergey Bozhenkov,
Kai Jakob Brunner,
Daniel Carralero,
Ken Hammond,
Golo Fuchert,
Jens Knauer,
Andreas Langenberg
, et al. (8 additional authors not shown)
Abstract:
Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the…
▽ More
Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the same time also particle fluxes are reduced such that material erosion can be mitigated. Sufficient neutral pressure was reached to maintain stable particle exhaust for density control in this plasma state. This regime could be maintained for up to 28 seconds with a minimum feedback control.
△ Less
Submitted 10 January, 2020; v1 submitted 7 January, 2020;
originally announced January 2020.
-
Large vacuum flux surfaces generated by tilted planar coils
Authors:
Jessica L. Li,
Jacob Austin,
Ben Y. Israeli,
Kenneth C. Hammond,
Francesco A. Volpe
Abstract:
Helical equilibria can be generated by arrangements of planar coils similar to tokamaks, but without a central solenoid and with the toroidal field (TF) coils tilted with respect to the vertical. This is known from earlier numerical works, e.g. P.E. Moroz, Phys.Plasmas 2, 4269 (1995). However, such concept tends to need large coils (of low aspect ratio) but form small plasmas (of large aspect rati…
▽ More
Helical equilibria can be generated by arrangements of planar coils similar to tokamaks, but without a central solenoid and with the toroidal field (TF) coils tilted with respect to the vertical. This is known from earlier numerical works, e.g. P.E. Moroz, Phys.Plasmas 2, 4269 (1995). However, such concept tends to need large coils (of low aspect ratio) but form small plasmas (of large aspect ratio). Here it is numerically shown that larger, more attractive vacuum flux surfaces -- relative to the size of the device -- can be generated by carefully optimizing the inclination of the TF coils and currents in the various coil-sets. Vacuum configurations of aspect ratios as low as 4 are found for 6 tilted TF circular coils. Higher numbers of TF coils have advantages (smaller effective ripple) and disadvantages (lower rotational transform, smaller plasma). Finally, the aspect-ratio $A$ of the vacuum flux surfaces is quantified as a function of the ratio $A_c$ of the coil-radius to the radial location of the coil-center. It is found that, in order to minimize $A$, it is beneficial to interlink or marginally interlink the TF coils ($A_c \lesssim 1$).
△ Less
Submitted 10 December, 2018; v1 submitted 27 September, 2018;
originally announced September 2018.
-
Overdense microwave plasma heating in the CNT stellarator
Authors:
K. C. Hammond,
R. R. Diaz-Pacheco,
A. Koehn,
F. A. Volpe,
Y. Wei
Abstract:
Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional damping…
▽ More
Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional damping of the X-mode at the upper hybrid resonant layer. The X-mode reaches that location by tunneling, mode-conversions or after polarization-scrambling reflections off the wall and in-vessel coils, regardless of the initial launch being in O- or X-mode. This interpretation was confirmed by full-wave numerical simulations. Also, as the CNT plasma is not completely ionized at these low microwave power levels, electron density was shown to increase with power. A dependence on magnetic field strength was also observed (for O-mode launch) and discussed.
△ Less
Submitted 8 August, 2017;
originally announced August 2017.
-
Changes in lipid membranes may trigger amyloid toxicity in Alzheimer's disease
Authors:
Elizabeth Drolle,
Alexander Negoda,
Keely Hammond,
Evgeny Pavlov,
Zoya Leonenko
Abstract:
Amyloid beta peptides (A\b{eta}), implicated in Alzheimers disease (AD), interact with the cellular membrane and induce amyloid toxicity. The composition of cellular membranes changes in aging and AD. We designed multi component lipid models to mimic healthy and diseased states of the neuronal membrane. Using atomic force microscopy (AFM), Kelvin probe force microscopy (KPFM) and black lipid membr…
▽ More
Amyloid beta peptides (A\b{eta}), implicated in Alzheimers disease (AD), interact with the cellular membrane and induce amyloid toxicity. The composition of cellular membranes changes in aging and AD. We designed multi component lipid models to mimic healthy and diseased states of the neuronal membrane. Using atomic force microscopy (AFM), Kelvin probe force microscopy (KPFM) and black lipid membrane (BLM) techniques, we demonstrated that these model membranes differ in their nanoscale structure and physical properties, and interact differently with A\b{eta}. Based on our data, we propose a new hypothesis that changes in lipid membrane due to aging and AD may trigger amyloid toxicity through electrostatic mechanisms, similar to the accepted mechanism of antimicrobial peptide action. Understanding the role of the membrane changes as a key activating amyloid toxicity may aid in the development of a new avenue for the prevention and treatment of AD.
△ Less
Submitted 26 April, 2017;
originally announced April 2017.
-
High-$β$ equilibrium and ballooning stability of the low aspect ratio CNT stellarator
Authors:
K. C. Hammond,
S. A. Lazerson,
F. A. Volpe
Abstract:
The existence and ballooning-stability of low aspect ratio stellarator equilibria is predicted for CNT with the aid of 3D numerical tools. In addition to having a low aspect ratio, CNT is characterized by a low magnetic field and small plasma volume. Also, highly overdense plasmas were recently heated in CNT by means of microwaves. These characteristics suggest that CNT might attain relatively hig…
▽ More
The existence and ballooning-stability of low aspect ratio stellarator equilibria is predicted for CNT with the aid of 3D numerical tools. In addition to having a low aspect ratio, CNT is characterized by a low magnetic field and small plasma volume. Also, highly overdense plasmas were recently heated in CNT by means of microwaves. These characteristics suggest that CNT might attain relatively high values of plasma $β$ and thus be of use in the experimental study of stellarator stability to high-$β$ instabilities such as ballooning modes. As a first step in that direction, here the ballooning stability limit is found numerically. Depending on the particular magnetic configuration we expect volume-averaged $β$ limits in the range 0.9-3.0%, and possibly higher, and observe indications of a second region of ballooning stability. As the aspect ratio is reduced, stability is found to increase in some configurations and decrease in others. Energy-balance estimates using stellarator scaling laws indicate that the lower $β$ limit may be attainable with overdense heating at powers of of 40 to 100 kW. The present study serves the additional purpose of testing VMEC and other stellarator codes at high values of $β$ and at low aspect ratios. For this reason, the study was carried out both for free boundary, for maximum fidelity to experiment, as well as with a fixed boundary, as a numerical test.
△ Less
Submitted 11 April, 2017; v1 submitted 29 December, 2016;
originally announced December 2016.
-
Molecular Dynamics simulations and Kelvin Probe Force microscopy to study of cholesterol-induced electrostatic nanodomains in complex lipid mixtures
Authors:
Elizabeth Drolle,
W. F. D. Bennett,
K. Hammond,
Edward Lyman,
Mikko Karttunen,
Zoya Leonenko
Abstract:
The molecular arrangement of lipids and proteins within biomembranes and monolayers gives rise to complex film morphologies as well as regions of distinct electrical surface potential, topographical and electrostatic nanoscale domains. To probe these nanodomains in soft matter is a challenging task both experimentally and theoretically. This work addresses the effects of cholesterol, lipid composi…
▽ More
The molecular arrangement of lipids and proteins within biomembranes and monolayers gives rise to complex film morphologies as well as regions of distinct electrical surface potential, topographical and electrostatic nanoscale domains. To probe these nanodomains in soft matter is a challenging task both experimentally and theoretically. This work addresses the effects of cholesterol, lipid composition, lipid charge, and lipid phase on the monolayer structure and the electrical surface potential distribution. Atomic Force Microscopy (AFM) was used to resolve topographical nanodomains and Kelvin Probe Force Microscopy (KPFM) to resolve electrical surface potential of these nanodomains in lipid monolayers. Model monolayers composed of dipalmitoylphosphatidylcholine (DPPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), 1,2-dioleoyl-sn-glycero-3-[phospho-rac-(3-lysyl(1-glycerol))] (DOPG), sphingomyelin, and cholesterol were studied. It is shown that cholesterol changes nanoscale domain formation, affecting both topography and electrical surface potential. The molecular basis for differences in electrical surface potential was addressed with atomistic molecular dynamics (MD). MD simulations qualitatively match the experimental results, with 100s of mV difference in electrostatic potential between liquid-disordered bilayer (Ld, less cholesterol and lower chain order) and a liquid-ordered bilayer (Lo, more cholesterol and higher chain order). Importantly, the difference in electrostatic properties between Lo and Ld phases suggests a new mechanism by which membrane composition couples to membrane function.
△ Less
Submitted 24 November, 2016; v1 submitted 30 June, 2016;
originally announced July 2016.
-
Onion-peeling inversion of stellarator images
Authors:
K. C. Hammond,
R. Diaz-Pacheco,
Y. Kornbluth,
F. A. Volpe,
Y. Wei
Abstract:
An onion-peeling technique is developed for inferring the emissivity profile of a stellarator plasma from a two-dimensional image acquired through a CCD or CMOS camera. Each pixel in the image is treated as an integral of emission along a particular line-of-sight. Additionally, the flux surfaces in the plasma are partitioned into discrete layers, each of which is assumed to have uniform emissivity…
▽ More
An onion-peeling technique is developed for inferring the emissivity profile of a stellarator plasma from a two-dimensional image acquired through a CCD or CMOS camera. Each pixel in the image is treated as an integral of emission along a particular line-of-sight. Additionally, the flux surfaces in the plasma are partitioned into discrete layers, each of which is assumed to have uniform emissivity. If the topology of the flux surfaces is known, this construction permits the development of a system of linear equations that can be solved for the emissivity of each layer. We present initial results of this method applied to wide-angle visible images of the CNT stellarator plasma.
△ Less
Submitted 12 July, 2016; v1 submitted 9 June, 2016;
originally announced June 2016.
-
Experimental and numerical study of error fields in the CNT stellarator
Authors:
K. C. Hammond,
A. Anichowski,
P. W. Brenner,
T. S. Pedersen,
S. Raftopoulos,
P. Traverso,
F. A. Volpe
Abstract:
Sources of error fields were indirectly inferred in a stellarator by reconciling computed and numerical flux surfaces. Sources considered so far include the displacements and tilts (but not the deformations, yet) of the four circular coils featured in the simple CNT stellarator. The flux surfaces were measured by means of an electron beam and phosphor rod, and were computed by means of a Biot-Sava…
▽ More
Sources of error fields were indirectly inferred in a stellarator by reconciling computed and numerical flux surfaces. Sources considered so far include the displacements and tilts (but not the deformations, yet) of the four circular coils featured in the simple CNT stellarator. The flux surfaces were measured by means of an electron beam and phosphor rod, and were computed by means of a Biot-Savart field-line tracing code. If the ideal coil locations and orientations are used in the computation, agreement with measurements is poor. Discrepancies are ascribed to errors in the positioning and orientation of the in-vessel interlocked coils. To that end, an iterative numerical method was developed. A Newton-Raphson algorithm searches for the coils' displacements and tilts that minimize the discrepancy between the measured and computed flux surfaces. This method was verified by misplacing and tilting the coils in a numerical model of CNT, calculating the flux surfaces that they generated, and testing the algorithm's ability to deduce the coils' displacements and tilts. Subsequently, the numerical method was applied to the experimental data, arriving at a set of coil displacements whose resulting field errors exhibited significantly improved quantitative and qualitative agreement with experimental results.
△ Less
Submitted 10 June, 2016; v1 submitted 15 February, 2016;
originally announced February 2016.
-
Metamaterial lens of specifiable frequency-dependent focus and adjustable aperture for electron cyclotron emission in the DIII-D tokamak
Authors:
K. C. Hammond,
W. J. Capecchi,
S. D. Massidda,
F. A. Volpe
Abstract:
Electron Cyclotron Emission (ECE) of different frequencies originates at different locations in non-uniformly magnetized plasmas. For simultaneous observation of multiple ECE frequencies from the outside edge of a toroidal plasma confinement device (e.g. a tokamak), the focal length of the collecting optics should increase with the frequency to maximize the resolution on a line of sight along the…
▽ More
Electron Cyclotron Emission (ECE) of different frequencies originates at different locations in non-uniformly magnetized plasmas. For simultaneous observation of multiple ECE frequencies from the outside edge of a toroidal plasma confinement device (e.g. a tokamak), the focal length of the collecting optics should increase with the frequency to maximize the resolution on a line of sight along the magnetic field gradient. Here we present the design and numerical study of a zoned metamaterial lens with such characteristics, for possible deployment with the 83-130 GHz ECE radiometer in the DIII-D tokamak. The lens consists of a concentric array of miniaturized element phase-shifters. These were reverse-engineered starting from the desired Gaussian beam waist locations and further optimized to account for diffraction and finite-aperture effects that tend to displace the waist. At the same time we imposed high and uniform transmittance, averaged over all phase-shifters. The focal length is shown to increase from 1.37 m to 1.97 m over the frequency range of interest, as desired for low-field DIII-D discharges (B = -1.57 T). Retracting the lens to receded positions rigidly moves the waists accordingly, resulting in a good match -within a fraction of the Rayleigh length- of the EC-emitting layer positions at higher fields (up to B = -2.00 T). Further, it is shown how varying the lens aperture might move the waists "non-rigidly" to better match the non-rigid movement of the EC-emitting layers with the magnetic field. The numerical method presented is very general and can be used to engineer any dependence of the focal length on the frequency, including zero or minimal chromatic aberration.
△ Less
Submitted 13 October, 2014;
originally announced October 2014.
-
Proto-CIRCUS Tilted-Coil Tokamak-Torsatron Hybrid: Design and Construction
Authors:
A. W. Clark,
M. Doumet,
K. C. Hammond,
Y. Kornbluth,
D. A. Spong,
R. Sweeney,
F. A. Volpe
Abstract:
We present the field-line modeling, design and construction of a prototype circular-coil tokamak-torsatron hybrid called Proto-CIRCUS. The device has a major radius R = 16 cm and minor radius a < 5 cm. The six "toroidal field" coils are planar as in a tokamak, but they are tilted. This, combined with induced or driven plasma current, is expected to generate rotational transform, as seen in field-l…
▽ More
We present the field-line modeling, design and construction of a prototype circular-coil tokamak-torsatron hybrid called Proto-CIRCUS. The device has a major radius R = 16 cm and minor radius a < 5 cm. The six "toroidal field" coils are planar as in a tokamak, but they are tilted. This, combined with induced or driven plasma current, is expected to generate rotational transform, as seen in field-line tracing and equilibrium calculations. The device is expected to operate at lower plasma current than a tokamak of comparable size and magnetic field, which might have interesting implications for disruptions and steady-state operation. Additionally, the toroidal magnetic ripple is less pronounced than in an equivalent tokamak in which the coils are not tilted. The tilted coils are interlocked, resulting in a relatively low aspect ratio, and can be moved, both radially and in tilt angle, between discharges. This capability will be exploited for detailed comparisons between calculations and field-line mapping measurements. Such comparisons will reveal whether this relatively simple concept can generate the expected rotational transform.
△ Less
Submitted 8 October, 2014;
originally announced October 2014.
-
Simulation and Analysis of TE Wave Propagation as a Probe for Electron Clouds in Particle Accelerators
Authors:
Kiran G. Sonnad,
Kenneth Hammond,
Robert Schwartz,
Seth Veitzer
Abstract:
The use of transverse electric (TE) waves has proved to be a powerful, noninvasive method for estimating the densities of electron clouds formed in particle accelerators. Results from the plasma simulation program VORPAL have been a useful guide for experimental studies related to this method, which have been performed at various accelerator facilities. This paper provides results of the simulatio…
▽ More
The use of transverse electric (TE) waves has proved to be a powerful, noninvasive method for estimating the densities of electron clouds formed in particle accelerators. Results from the plasma simulation program VORPAL have been a useful guide for experimental studies related to this method, which have been performed at various accelerator facilities. This paper provides results of the simulation and modeling work done in conjunction with experimental efforts carried out at CesrTA. The discussion starts from the phase shift induced by electron clouds in the transmission of the wave, followed by the effect of reflections along the beam-pipe, the simulation of the resonant wave method and the effects of external magnetic fields, namely dipoles and wigglers. A derivation of the dispersion relationship of wave propagation for arbitrary geometries in field free regions with a uniform cloud density is also provided.
△ Less
Submitted 4 January, 2014; v1 submitted 22 November, 2013;
originally announced November 2013.
-
Electron Cloud Density Measurements in Accelerator Beam-pipe Using Resonant Microwave Excitation
Authors:
John P. Sikora,
Benjamin T. Carlson,
Danielle O. Duggins,
Kenneth C. Hammond,
Stefano De Santis,
Alister J. Tencate
Abstract:
An accelerator beam can generate low energy electrons in the beam-pipe, generally called electron cloud, that can produce instabilities in a positively charged beam. One method of measuring the electron cloud density is by coupling microwaves into and out of the beam-pipe and observing the response of the microwaves to the presence of the electron cloud. In the original technique, microwaves are t…
▽ More
An accelerator beam can generate low energy electrons in the beam-pipe, generally called electron cloud, that can produce instabilities in a positively charged beam. One method of measuring the electron cloud density is by coupling microwaves into and out of the beam-pipe and observing the response of the microwaves to the presence of the electron cloud. In the original technique, microwaves are transmitted through a section of beam-pipe and a change in EC density produces a change in the phase of the transmitted signal. This paper describes a variation on this technique in which the beam-pipe is resonantly excited with microwaves and the electron cloud density calculated from the change that it produces in the resonant frequency of the beam-pipe. The resonant technique has the advantage that measurements can be localized to sections of beam-pipe that are a meter or less in length with a greatly improved signal to noise ratio.
△ Less
Submitted 5 May, 2014; v1 submitted 21 November, 2013;
originally announced November 2013.
