Showing 1–8 of 8 results for author: Hall-Chen, V

Measurement of zero-frequency fluctuations generated by coupling between Alfvén modes in the JET tokamak

Authors: Juan Ruiz Ruiz, Jeronimo Garcia, Michael Barnes, Mykola Dreval, Carine Giroud, Valerian H. Hall-Chen, Michael R. Hardman, Jon C. Hillesheim, Yevgen Kazakov, Samuele Mazzi, Felix I. Parra, Bhavin S. Patel, Alexander A. Schekochihin, Ziga Stancar, the JET Contributors, the EUROfusion Tokamak Exploitation Team

Abstract: We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with th… ▽ More We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with theoretical and numerical predictions of zonal modes pumped by Alfvén modes, and is correlated with an increase in the deep core ion temperature, temperature gradient, and confinement factor $H_{89,P}$. Despite the energetic particle transport induced by the Alfvén eigenmodes, the generation of a zero-frequency fluctuation that can suppress the turbulence leads to an overall improvement of confinement. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Using Convolutional Neural Networks to detect Edge Localized Modes in DIII-D from Doppler Backscattering measurements

Authors: N. Q. X. Teo, V. H. Hall-Chen, K. Barada, R. J. H. Ng, L. Gu, A. K. Yeoh, Q. T. Pratt, X. Garbet, T. L. Rhodes

Abstract: In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods $\unicode{x2013}$ D-alpha spectr… ▽ More In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods $\unicode{x2013}$ D-alpha spectroscopy and Doppler backscattering (DBS). The former detects ELMs by measuring Balmer alpha emission while the latter uses microwave radiation to probe the plasma. DBS has the advantage of having higher temporal resolution and robustness to damage. These advantages of DBS diagnostics may be beneficial for future operational tokamaks and thus data processing techniques for DBS should be developed in preparation. In sight of this, we explore the training of neural networks to detect ELMs from DBS data, using D-alpha data as the ground truth. With shots found in the DIII-D database, the model is trained to classify each time step based on the occurrence of an ELM event. The results are promising. When tested on shots similar to those used for training, the model is capable of consistently achieving a high f1-score of 0.93. This score is a performance metric for imbalanced datasets that ranges between 0 and 1. We evaluate the performance of our neural network on a variety of ELMs $\unicode{x2013}$ grasssy, suppressed, and wide pedestal $\unicode{x2013}$ finding broad applicability. Beyond ELMs, our work demonstrates the wider feasibility of applying neural networks to data from DBS diagnostics. △ Less

Submitted 3 July, 2024; v1 submitted 3 June, 2024; originally announced June 2024.

First data and preliminary experimental results from a new Doppler Backscattering system on the MAST-U spherical tokamak

Authors: P. Shi, R. Scannell, J. Wen, Z. B. Shi, C. Michael, T. Rhodes, V. H. Hall-Chen, Z. C. Yang, M. Jiang, W. L. Zhong

Abstract: A new Doppler backscattering (DBS) system, consisting of Q-band and V-band, has been installed and achieved its first data on the MAST-U spherical tokamak. The Q-band and V-band have separate microwave source systems, but share the same optical front-end components. The Q-band and V-band sources simultaneously generate eight (34, 36, 38, 40, 42, 44, 46 and 48 GHz) and seven (52.5, 55, 57.5, 60, 62… ▽ More A new Doppler backscattering (DBS) system, consisting of Q-band and V-band, has been installed and achieved its first data on the MAST-U spherical tokamak. The Q-band and V-band have separate microwave source systems, but share the same optical front-end components. The Q-band and V-band sources simultaneously generate eight (34, 36, 38, 40, 42, 44, 46 and 48 GHz) and seven (52.5, 55, 57.5, 60, 62.5, 65 and 67.5 GHz) fixed frequency probe beams, respectively. These frequencies provide a large range of radial positions from the low-field-side edge plasma to the core, and possibly to the high-field-side edge, depending on the plasma conditions. The quasi-optical system consists of a remotely-tunable polarizer, a focusing lens and a remotely-steerable mirror. By steering the mirror, the system provides remote control of the probed density fluctuation wavenumber, and allow the launch angle to match the magnetic field. The range of accessible turbulence wavenumbers (k_θ) is reasonably large with normalized wavenumber k_θρ_s ranging from <0.5 to 9. The first data acquired by this DBS system is validated by comparing with the data from the other DBS system on MAST-U (introduced in Ref. [21]). An example of measuring the velocity profile spanning from the edge to the center in a high-density plasma is presented, indicating the robust capabilities of the integrated Q-band and V-band DBS systems. △ Less

Submitted 11 September, 2023; v1 submitted 1 September, 2023; originally announced September 2023.

Effect of mismatch on Doppler backscattering in MAST and MAST-U plasmas

Authors: Valerian H. Hall-Chen, Felix I. Parra, Jon C. Hillesheim, Juan Ruiz Ruiz, Neal A. Crocker, Peng Shi, Hong Son Chu, Simon J. Freethy, Lucy A. Kogan, William A. Peebles, Quinn T. Pratt, Terry L. Rhodes, Kevin Ronald, Rory Scannell, David C. Speirs, Stephen Storment, Jonathan Trisno

Abstract: The Doppler backscattering (DBS) diagnostic, also referred to as Doppler reflectometry, measures turbulent density fluctuations of intermediate length scales. However, when the beam's wavevector is not properly aligned perpendicular to the magnetic field, the backscattered power is attenuated. In previous work, we used beam tracing and reciprocity to derive this mismatch attenuation quantitatively… ▽ More The Doppler backscattering (DBS) diagnostic, also referred to as Doppler reflectometry, measures turbulent density fluctuations of intermediate length scales. However, when the beam's wavevector is not properly aligned perpendicular to the magnetic field, the backscattered power is attenuated. In previous work, we used beam tracing and reciprocity to derive this mismatch attenuation quantitatively. In this paper, we applied our model, in the small but finite mismatch limit, to a several new cases. We compared our predictions with multiple O-mode channels for the first time. We then identified a $\sim 3^{\circ}$ error in the MAST Q-band's quasioptics, showing that our model is useful for commissioning DBS diagnostics. For both O- and X-mode, we compared experimental data with our model's predictions at multiple times during the shots, unlike our previous work, where only a single time was analysed. Finally, we analysed other contributions to the backscattered signal, evaluating how much they affect our measurements of mismatch attenuation, giving comparisons with data from both MAST and MAST-U. This paper's detailed study systematically validates and demonstrates the usefulness of our model for quantitatively interpreting DBS data from spherical tokamaks. △ Less

Submitted 5 June, 2024; v1 submitted 30 November, 2022; originally announced November 2022.

Validating and optimising mismatch tolerance of Doppler backscattering measurements with the beam model

Authors: Valerian H. Hall-Chen, Julius Damba, Felix I. Parra, Quinn T. Pratt, Clive A. Michael, Shi Peng, Terry L. Rhodes, Neal A. Crocker, Jon C. Hillesheim, Rongjie Hong, Shikang Ni, William A. Peebles, Ching Eng Png, Juan Ruiz Ruiz

Abstract: We use the beam model of Doppler backscattering (DBS), which was previously derived from beam tracing and the reciprocity theorem, to shed light on mismatch attenuation. This attenuation of the backscattered signal occurs when the wavevector of the probe beam's electric field is not in the plane perpendicular to the magnetic field. Correcting for this effect is important for determining the amplit… ▽ More We use the beam model of Doppler backscattering (DBS), which was previously derived from beam tracing and the reciprocity theorem, to shed light on mismatch attenuation. This attenuation of the backscattered signal occurs when the wavevector of the probe beam's electric field is not in the plane perpendicular to the magnetic field. Correcting for this effect is important for determining the amplitude of the actual density fluctuations. Previous preliminary comparisons between the model and Mega-Ampere Spherical Tokamak (MAST) plasmas were promising. In this work, we quantitatively account for this effect on DIII-D, a conventional tokamak. We compare the predicted and measured mismatch attenuation in various DIII-D, MAST, and MAST-U plasmas, showing that the beam model is applicable in a wide variety of situations. Finally, we performed a preliminary parameter sweep and found that the mismatch tolerance can be improved by optimising the probe beam's width and curvature at launch. This is potentially a design consideration for new DBS systems. △ Less

Submitted 30 September, 2022; originally announced September 2022.

Interpreting Radial Correlation Doppler Reflectometry using Gyrokinetic Simulations

Authors: J. Ruiz Ruiz, F. I. Parra, V. H. Hall-Chen, N. Christen, M. Barnes, J. Candy, J. Garcia, C. Giroud, W. Guttenfelder, J. C. Hillesheim, C. Holland, N. T. Howard, Y. Ren, A. E. White, JET contributors.

Abstract: A linear response, local model for the DBS amplitude applied to gyrokinetic simulations shows that radial correlation Doppler reflectometry measurements (RCDR, Schirmer et al., Plasma Phys. Control. Fusion 49 1019 (2007)) are not sensitive to the average turbulence radial correlation length, but to a correlation length that depends on the binormal wavenumber $k_\perp$ selected by the Doppler backs… ▽ More A linear response, local model for the DBS amplitude applied to gyrokinetic simulations shows that radial correlation Doppler reflectometry measurements (RCDR, Schirmer et al., Plasma Phys. Control. Fusion 49 1019 (2007)) are not sensitive to the average turbulence radial correlation length, but to a correlation length that depends on the binormal wavenumber $k_\perp$ selected by the Doppler backscattering (DBS) signal. Nonlinear gyrokinetic simulations show that the turbulence naturally exhibits a non-separable power law spectrum in wavenumber space, leading to a power law dependence of the radial correlation length with binormal wavenumber $l_r \sim C k_\perp^{-α} (α\approx 1)$ which agrees with the inverse proportionality relationship between the measured $l_r$ and $k_\perp $ in experiments (Fernandez-Marina et al., Nucl. Fusion 54 072001 (2014)). This offers the possibility of characterizing the eddy aspect ratio in the perpendicular plane to the magnetic field and motivates future use of a non-separable turbulent spectrum to quantitatively interpret RCDR and potentially other turbulence diagnostics. The radial correlation length is only measurable when the radial resolution at the cutoff location $W_n$ satisfies $W_n \ll l_r$, while the measurement becomes dominated by $W_n$ for $W_n \gg l_r$. This suggests that $l_r$ is likely inaccessible for electron-scale DBS measurements ($k_\perpρ_s > 1$). The effect of $W_n$ on ion-scale radial correlation lengths could be non-negligible. △ Less

Submitted 17 January, 2022; originally announced January 2022.

Comments: Total of 13 figures, 36 pages. TEX commands are included in the abstract for mathematical expressions. Submitted to Plasma Physics and Controlled Fusion

Beam model of Doppler backscattering

Authors: Valerian H Hall-Chen, Felix I Parra, Jon C Hillesheim

Abstract: We use beam tracing -- implemented with a newly-written code, Scotty -- and the reciprocity theorem to derive a model for the linear backscattered power of the Doppler Backscattering (DBS) diagnostic. Our model works for both the O-mode and X-mode in tokamak geometry (and certain regimes of stellarators). We present the analytical derivation of our model and its implications on the DBS signal loca… ▽ More We use beam tracing -- implemented with a newly-written code, Scotty -- and the reciprocity theorem to derive a model for the linear backscattered power of the Doppler Backscattering (DBS) diagnostic. Our model works for both the O-mode and X-mode in tokamak geometry (and certain regimes of stellarators). We present the analytical derivation of our model and its implications on the DBS signal localisation and the wavenumber resolution. To determine these two quantities, we find that it is the curvature of the field lines and the magnetic shear that are important, rather than the curvature of the cut-off surface. We also provide an explicit formula for the hitherto poorly-understood quantitative effect of the mismatch angle. Consequently, one can use this model to correct for the attenuation due to mismatch, avoiding the need for empirical optimisation. This is especially important in spherical tokamaks, since the magnetic pitch angle is large and varies both spatially and temporally. △ Less

Submitted 22 February, 2022; v1 submitted 22 September, 2021; originally announced September 2021.

Comments: This is the version that passed peer review. No major changes, but many improvements to writing style

Journal ref: Plasma Physics and Controlled Fusion 64, 095002 (2022)

Structural Color 3D Printing By Shrinking Photonic Crystals

Authors: Yejing Liu, Hao Wang, Jinfa Ho, Ryan C. Ng, Ray J. H. Ng, Valerian H. Hall-Chen, Eleen H. H. Koay, Zhaogang Dong, Hailong Liu, Cheng-Wei Qiu, Julia R. Greer, Joel K. W. Yang

Abstract: The rings, spots and stripes found on some butterflies, Pachyrhynchus weevils, and many chameleons are notable examples of natural organisms employing photonic crystals to produce colorful patterns. Despite advances in nanotechnology, we still lack the ability to print arbitrary colors and shapes in all three dimensions at this microscopic length scale. Commercial nanoscale 3D printers based on tw… ▽ More The rings, spots and stripes found on some butterflies, Pachyrhynchus weevils, and many chameleons are notable examples of natural organisms employing photonic crystals to produce colorful patterns. Despite advances in nanotechnology, we still lack the ability to print arbitrary colors and shapes in all three dimensions at this microscopic length scale. Commercial nanoscale 3D printers based on two-photon polymerization are incapable of patterning photonic crystal structures with the requisite ~300 nm lattice constant to achieve photonic stopbands/ bandgaps in the visible spectrum and generate colors. Here, we introduce a means to produce 3D-printed photonic crystals with a 5x reduction in lattice constants (periodicity as small as 280 nm), achieving sub-100-nm features with a full range of colors. The reliability of this process enables us to engineer the bandstructures of woodpile photonic crystals that match experiments, showing that observed colors can be attributed to either slow light modes or stopbands. With these lattice structures as 3D color volumetric elements (voxels), we printed 3D microscopic scale objects, including the first multi-color microscopic model of the Eiffel Tower measuring only 39-microns tall with a color pixel size of 1.45 microns. The technology to print 3D structures in color at the microscopic scale promises the direct patterning and integration of spectrally selective devices, such as photonic crystal-based color filters, onto free-form optical elements and curved surfaces. △ Less

Submitted 14 May, 2019; originally announced May 2019.