-
Radio-frequency cavity field measurements through free falling bead
Authors:
Xiaonan Du,
Lars Groening
Abstract:
This paper introduces a novel bead-falling measurement method for the precise and efficient mapping of electromagnetic fields within radio-frequency (RF) cavities, which are crucial components in the design of accelerators. The traditional bead-pull method, while effective, involves mechanical complexities and is prone to errors from wire perturbations. The innovative method reported here leverage…
▽ More
This paper introduces a novel bead-falling measurement method for the precise and efficient mapping of electromagnetic fields within radio-frequency (RF) cavities, which are crucial components in the design of accelerators. The traditional bead-pull method, while effective, involves mechanical complexities and is prone to errors from wire perturbations. The innovative method reported here leverages the simplicity and accuracy of free-falling beads to mitigate these issues. This technique eliminates the need for a wire-pulley system, thereby simplifying the experimental setup and reducing potential mechanical errors. We detail the development and operational principles of this new method, including the design of a compact, portable measurement device that integrates a bead/droplet release system and a bead detection system linked to a Vector Network Analyzer (VNA). The device has been tested with a three-gap buncher cavity and a scaled Alvarez-type cavity, demonstrating its ability to perform rapid, reliable field measurements under various challenging conditions, including low signal-to-noise ratios and environmental vibrations. The results confirm the method's superiority in precision and operational efficiency, potentially setting a new standard for RF cavity diagnostics and tuning.
△ Less
Submitted 27 June, 2024;
originally announced July 2024.
-
Considerations and findings on beam vorticity dynamics
Authors:
L. Groening
Abstract:
This document is on considerations and findings on modelling of spinning beams. Spinning has been proposed for stabilizing beams against perturbations notably risen by non-linear space charge forces, see [Y.-L. Cheon et al., Effects of beam spinning on the fourth-order particle resonance of 3D bunched beams in high-intensity linear accelerators, Phys. Rev. Accel. & Beams 25, 064002 (2022)]. Althou…
▽ More
This document is on considerations and findings on modelling of spinning beams. Spinning has been proposed for stabilizing beams against perturbations notably risen by non-linear space charge forces, see [Y.-L. Cheon et al., Effects of beam spinning on the fourth-order particle resonance of 3D bunched beams in high-intensity linear accelerators, Phys. Rev. Accel. & Beams 25, 064002 (2022)]. Although not further treated therein, spinning can be quantified by angular momentumor by vorticity. Considering vorticity revealed that the latter has remarkable similarity w.r.t. its modelling along solenoid channels to modelling the beam envelope. Matrices of vorticity transport, corresponding phase advances, and Twiss parameters look very similar and are partially even identical to their counterparts concerning envelopes. Corresponding to emittance, the quantity of vortissance, being a constant of motion, is defined. Unlike emittance, for vorticity-dominated beams it may take imaginary values, causing Twiss parameters, and negative or zero phase advances along a finite beam line section. This imposes considerable consequences on respective periodic solutions.
△ Less
Submitted 14 March, 2024; v1 submitted 24 January, 2024;
originally announced January 2024.
-
Periodic solution for transport of intense and coupled coasting beams through quadrupole channels
Authors:
Chen Xiao,
Lars Groening
Abstract:
Imposing defined spinning to a particle beam increases its stability against perturbations from space charge~[Y.-L.~Cheon et al., Effects of beam spinning on the fourth-order particle resonance of 3D bunched beams in high-intensity linear accelerators, Phys. Rev. Accel. \& Beams {\bf 25}, 064002 (2022)]. In order to fully explore this potential, proper matching of intense coupled beams along regul…
▽ More
Imposing defined spinning to a particle beam increases its stability against perturbations from space charge~[Y.-L.~Cheon et al., Effects of beam spinning on the fourth-order particle resonance of 3D bunched beams in high-intensity linear accelerators, Phys. Rev. Accel. \& Beams {\bf 25}, 064002 (2022)]. In order to fully explore this potential, proper matching of intense coupled beams along regular lattices is mandatory. Herein, a novel procedure assuring matched transport is described and benchmarked through simulations. The concept of matched transport along periodic lattices has been extended from uncoupled beams to those with considerable coupling between the two transverse degrees of freedom. For coupled beams, matching means extension of cell-to-cell periodicity from just transverse envelopes to the coupled beam moments and to quantities being derived from these.
△ Less
Submitted 20 September, 2023;
originally announced September 2023.
-
Particle beam eigen-emittances, phase integral, vorticity, and rotations
Authors:
L. Groening,
C. Xiao,
M. Chung
Abstract:
Particle beam eigen-emittances comprise the lowest set of rms-emittances that can be imposed to a beam through symplectic optical elements. For cases of practical relevance this paper introduces an approximation providing a very simple and powerful relation between transverse eigen-emittance variation and the beam phase integral. This relation enormously facilitates modeling eigen-emittance tailor…
▽ More
Particle beam eigen-emittances comprise the lowest set of rms-emittances that can be imposed to a beam through symplectic optical elements. For cases of practical relevance this paper introduces an approximation providing a very simple and powerful relation between transverse eigen-emittance variation and the beam phase integral. This relation enormously facilitates modeling eigen-emittance tailoring scenarios. It reveals that difference of eigen-emittances is given by the beam phase integral or vorticity rather than by angular momentum. Within the approximation any beam is equivalent to two objects rotating at angular velocities of same strength and different sign. A description through circular beam modes has been done already in [A. Burov, S. Nagaitsev, and Y. Derbenev, Circular modes, beam adapters, and their applications in beam optics, Phys. Rev. E 66, 016503 (2002)]. The new relation presented here is a complementary and vivid approach to provide a physical picture of the nature of eigen-emittances for cases of practical interest.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
Refining the evaluation of eigen-emittances measured by the dedicated four-dimensional emittance scanner ROSE
Authors:
C. Xiao,
X. N. Du,
L. Groening,
M. Maier
Abstract:
A dedicated device to fully determine the four-dimensional beam matrix, called ROSE (ROtating System for Emittance measurements) was successfully commissioned. Results obtained with 83Kr13+ at 1.4 MeV/u are reported in Phys. Rev. Accel. Beams 19, 072802 (2016). Coupled moments were determined with an accuracy of about 10%, which is sufficiently low to reliably determine a lattice which could decou…
▽ More
A dedicated device to fully determine the four-dimensional beam matrix, called ROSE (ROtating System for Emittance measurements) was successfully commissioned. Results obtained with 83Kr13+ at 1.4 MeV/u are reported in Phys. Rev. Accel. Beams 19, 072802 (2016). Coupled moments were determined with an accuracy of about 10%, which is sufficiently low to reliably determine a lattice which could decouple the beam. However, the remaining uncertainty on the corresponding eigen emittances was still considerable high. The present paper reports on improvement of the evaluation procedure which lowers the inaccuracy of measured eigen emittances significantly to the percent level. The method is based on trimming directly measured data within their intrinsic measurement resolution such that the finally resulting quantity is determined with high precision.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Relation between particle beam eigen-emittances and canonical vorticity flux
Authors:
Lars Groening,
Moses Chung
Abstract:
Particle beams provided by accelerators occupy a finite volume of the four dimensional transverse phase space. The latter is spanned by the four degrees of freedom, i.e., horizontal/vertical position and momentum. This volume is referred to as emittance. Horizontal and vertical emittances are obtained through projections onto the two transverse sub-phase spaces. Eigen-emittances are obtained from…
▽ More
Particle beams provided by accelerators occupy a finite volume of the four dimensional transverse phase space. The latter is spanned by the four degrees of freedom, i.e., horizontal/vertical position and momentum. This volume is referred to as emittance. Horizontal and vertical emittances are obtained through projections onto the two transverse sub-phase spaces. Eigen-emittances are obtained from the latter by removing all horizontal-vertical correlations through an appropriate beam optics section. Canonical vorticity flux is used for instance for modelling dynamics of tubes formed by magnetic field lines and particle currents embedded into plasmas. This report is on the relation of eigen-emittances and canonical vorticity flux. Change of beam eigen-emittances is equivalent to change of beam canonical vorticity flux.
△ Less
Submitted 24 December, 2020; v1 submitted 2 August, 2018;
originally announced August 2018.
-
Extension of Busch's Theorem to Particle Beams
Authors:
L. Groening,
M. Chung,
C. Xiao
Abstract:
In 1926, H. Busch formulated a theorem for one single charged particle moving along a region with a longitudinal magnetic field [H. Busch, Berechnung der Bahn von Kathodenstrahlen in axial symmetrischen electromagnetischen Felde, Z. Phys. 81 (5) p. 974, (1926)]. The theorem relates particle angular momentum to the amount of field lines being enclosed by the particle cyclotron motion. This paper ex…
▽ More
In 1926, H. Busch formulated a theorem for one single charged particle moving along a region with a longitudinal magnetic field [H. Busch, Berechnung der Bahn von Kathodenstrahlen in axial symmetrischen electromagnetischen Felde, Z. Phys. 81 (5) p. 974, (1926)]. The theorem relates particle angular momentum to the amount of field lines being enclosed by the particle cyclotron motion. This paper extends the theorem to many particles forming a beam without cylindrical symmetry. A quantity being preserved is derived, which represents the sum of difference of eigen-emittances, magnetic flux through the beam area, and beam rms-vorticity multiplied by the magnetic flux. Tracking simulations and analytical calculations using the generalized Courant-Snyder formalism confirm the validity of the extended theorem. The new theorem has been applied for fast modelling of experiments with electron and ion beams on transverse emittance re-partitioning conducted at FERMILAB and at GSI.
△ Less
Submitted 27 September, 2017;
originally announced September 2017.
-
Generalized Kapchinskij-Vladimirskij Distribution and Beam Matrix for Phase-Space Manipulations of High-Intensity Beams
Authors:
Moses Chung,
Hong Qin,
Ronald C. Davidson,
Lars Groening,
Chen Xiao
Abstract:
In an uncoupled linear lattice system, the Kapchinskij-Vladimirskij (KV) distribution, formulated on the basis of the single-particle Courant-Snyder (CS) invariants, has served as a fundamental theoretical basis for the analyses of the equilibrium, stability, and transport properties of high-intensity beams for the past several decades. Recent applications of high-intensity beams, however, require…
▽ More
In an uncoupled linear lattice system, the Kapchinskij-Vladimirskij (KV) distribution, formulated on the basis of the single-particle Courant-Snyder (CS) invariants, has served as a fundamental theoretical basis for the analyses of the equilibrium, stability, and transport properties of high-intensity beams for the past several decades. Recent applications of high-intensity beams, however, require beam phase-space manipulations by intentionally introducing strong coupling. In this Letter, we report the full generalization of the KV model by including all of the linear (both external and space-charge) coupling forces, beam energy variations, and arbitrary emittance partition, which all form essential elements for phase-space manipulations. The new generalized KV model yields spatially uniform density profiles and corresponding linear self-field forces as desired. The corresponding matrix envelope equations and beam matrix for the generalized KV model provide important new theoretical tools for the detailed design and analysis of high-intensity beam manipulations, for which previous theoretical models are not easily applicable.
△ Less
Submitted 1 October, 2016;
originally announced October 2016.
-
Field Stabilization of Alvarez-Type Cavities
Authors:
Xiaonan Du,
Lars Groening,
Sascha Mickat,
Anja Seibel
Abstract:
Alvarez-type cavities are commonly used to reliably accelerate high quality hadron beams. Optimization of their longitudinal field homogeneity is usually accomplished by post-couplers, i.e. additional rods being integrated into the cavity. This paper instead proposes to use the stems that keep the drift tubes for that purpose. As their individual azimuthal orientations do not change the cavity's u…
▽ More
Alvarez-type cavities are commonly used to reliably accelerate high quality hadron beams. Optimization of their longitudinal field homogeneity is usually accomplished by post-couplers, i.e. additional rods being integrated into the cavity. This paper instead proposes to use the stems that keep the drift tubes for that purpose. As their individual azimuthal orientations do not change the cavity's undisturbed operational mode, they comprise a set of free parameters that can be used to modify higher mode field patterns. The latter have significant impact on the robustness of the operational mode w.r.t. eventual perturbations. Several optimized stem configurations are presented and benchmarked against each other. The path to obtain these configurations is paved analytically and worked out in detail through simulations. It is shown that the method provides for flat field distributions and very low field tilt sensitivities without insertion of post-couplers.
△ Less
Submitted 30 September, 2016;
originally announced October 2016.
-
Rotating system for four-dimensional transverse rms-emittance measurements
Authors:
C. Xiao,
M. Maier,
X. N. Du,
P. Gerhard,
L. Groening,
S. Mickat,
H. Vormann
Abstract:
Knowledge of the transverse four-dimensional beam rms-parameters is essential for applications that involve lattice elements that couple the two transverse degrees of freedom (planes). Of special interest is the removal of inter-plane correlations to reduce the projected emittances. A dedicated ROtating System for Emittance measurements (ROSE) has been proposed, developed, and successfully commiss…
▽ More
Knowledge of the transverse four-dimensional beam rms-parameters is essential for applications that involve lattice elements that couple the two transverse degrees of freedom (planes). Of special interest is the removal of inter-plane correlations to reduce the projected emittances. A dedicated ROtating System for Emittance measurements (ROSE) has been proposed, developed, and successfully commissioned to fully determine the four-dimensional beam matrix. This device has been used at the High Charge injector (HLI) at GSI using a beam line which is composed of a skew quadrupole triplet, a normal quadrupole doublet, and ROSE. Mathematical algorithms, measurements, and results for ion beams of 83Kr13+ at 1.4 MeV/u are reported in this paper.
△ Less
Submitted 7 April, 2016;
originally announced April 2016.
-
In Situ Measurement of Mechanical Vibrations of a 4-Rod RFQ at GSI
Authors:
P. Gerhard,
L. Groening,
K. -O. Voss
Abstract:
A new 4-rod RFQ was commissioned at the UNILAC in 2009, it went into operation in 2010. At high rf amplitudes strong modulations of the rf reflection emerge. They are attributed to mechanical oscillations of the rods, excited by the rf pulse. As these modulations could so far only be seen during the rf pulse by means of rf measurements, a direct observation of the mechanical vibrations was desirab…
▽ More
A new 4-rod RFQ was commissioned at the UNILAC in 2009, it went into operation in 2010. At high rf amplitudes strong modulations of the rf reflection emerge. They are attributed to mechanical oscillations of the rods, excited by the rf pulse. As these modulations could so far only be seen during the rf pulse by means of rf measurements, a direct observation of the mechanical vibrations was desirable. Such measurements have been conducted using a commercial laser vibrometer, allowing the investigation of the mechanical behavior of the RFQ in situ and independent of the presence of rf power. Results from investigations under standard operation conditions confirm the vibrations as the source of the modulations observed by rf as well as their excitation by the rf pulse. Further measurements revealed more details about the excitation process, leading to a better understanding and possibly new ways of mitigation.
△ Less
Submitted 9 December, 2014;
originally announced December 2014.
-
Experimental Proof of Adjustable Single-Knob Ion Beam Emittance Partitioning
Authors:
L. Groening,
M. Maier,
C. Xiao,
L. Dahl,
P. Gerhard,
O. K. Kester,
S. Mickat,
H. Vormann,
M. Vossberg,
M. Chung
Abstract:
The performance of accelerators profits from phase space tailoring by coupling of planes. The previously applied techniques swap the emittances among the three planes but the set of available emittances is fixed. In contrast to these emittance exchange scenarios the emittance transfer scenario presented here allows for arbitrarily changing the set of emittances as long as the product of the emitta…
▽ More
The performance of accelerators profits from phase space tailoring by coupling of planes. The previously applied techniques swap the emittances among the three planes but the set of available emittances is fixed. In contrast to these emittance exchange scenarios the emittance transfer scenario presented here allows for arbitrarily changing the set of emittances as long as the product of the emittances is preserved. This letter is on the first experimental demonstration of transverse emittance transfer along an ion beam line. The amount of transfer is chosen by setting just one single magnetic field value. The envelope-functions (beta) and -slopes (alpha) of the finally uncorrelated and re-partitioned beam at the exit of the transfer line do not depend on the amount of transfer.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
Decoupling of beams previously coupled by effective stand-alone solenoid fringe fields
Authors:
Lars Groening
Abstract:
Beams passing through a solenoid fringe field experience x-y coupling and change of their eigen-emittances. As reported previously (C.~Xiao et al., Phys. Rev. ST Accel. Beams 044201, {\bf 16} 2013) constant settings of a subsequent decoupling section can be found such that variation of the fringe field strength will not change the Twiss parameters $β$ and $α$ in both transverse planes at the exit…
▽ More
Beams passing through a solenoid fringe field experience x-y coupling and change of their eigen-emittances. As reported previously (C.~Xiao et al., Phys. Rev. ST Accel. Beams 044201, {\bf 16} 2013) constant settings of a subsequent decoupling section can be found such that variation of the fringe field strength will not change the Twiss parameters $β$ and $α$ in both transverse planes at the exit of the decoupling section. For time being this feature was understood for a generic beam line but not to the generality to which it is observed. This report is on explanation of the convenient decoupling of fringe-coupled beams by any beam line that provides decoupling. For better coherence this report includes recapitulation of previous works.
△ Less
Submitted 23 October, 2014; v1 submitted 27 March, 2014;
originally announced March 2014.
-
Preparation of an emittance transfer experiment
Authors:
C. Xiao,
O. Kester,
L. Groening,
H. Leibrock,
M. Maier
Abstract:
Flat beams feature unequal emittances in the horizontal and vertical phase space. Those beams were created successfully in lepton machines. Although a number of applications will profit also from flat hadron beams, to our knowledge they have never been created systematically. Multi-turn injection schemes, spectrometers, and colliders will directly benefit from those beams. The present paper covers…
▽ More
Flat beams feature unequal emittances in the horizontal and vertical phase space. Those beams were created successfully in lepton machines. Although a number of applications will profit also from flat hadron beams, to our knowledge they have never been created systematically. Multi-turn injection schemes, spectrometers, and colliders will directly benefit from those beams. The present paper covers the preparation of the experimental proof of principle for flat hadron beam creation in a beam transport section. Detailed simulations of the experiment, based on charge state stripping inside of a solenoid [L. Groening, Phys. Rev. ST Accel. Beams 14, 064201 (2011)], are performed. The matrix formalism was benchmarked with tracking through three-dimensional magnetic field maps of solenoids. An error analysis targeting at investigation of the impact of machine errors on the round-to-flat beam transformation has been performed. The remarkable flexibility of the set-up w.r.t. decoupling is addressed, as it can provide an one-knob tool to set the horizontal and vertical emittance partitioning. Finally, the status of hardware design and production is given.
△ Less
Submitted 10 December, 2012;
originally announced December 2012.
-
Concept for controlled transverse emittance transfer within a linac ion beam
Authors:
Lars Groening
Abstract:
For injection of beams into circular machines with different horizontal and vertical emittance acceptance, the injection efficiency can be increased if these beams are flat, i.e. if they feature unequal transverse emittances. Generation of flat electron beams is well known and has been demonstrated already in beam experiments. It was proposed also for ion beams that were generated in an Electron C…
▽ More
For injection of beams into circular machines with different horizontal and vertical emittance acceptance, the injection efficiency can be increased if these beams are flat, i.e. if they feature unequal transverse emittances. Generation of flat electron beams is well known and has been demonstrated already in beam experiments. It was proposed also for ion beams that were generated in an Electron Cyclotron-Resonance (ECR) source. We introduce an extension of the method to beams that underwent charge state stripping without requiring their generation inside an ECR source. Results from multi-particle simulations are presented to demonstrate the validity of the method.
△ Less
Submitted 24 March, 2011;
originally announced March 2011.
-
Coherent Synchrotron Radiation Measurements in the CLIC Test Facility (CTF II)
Authors:
H. H. Braun,
R. Corsini,
L. Groening,
F. Zhou,
A. Kabel,
T. Raubenheimer,
R. Li,
T. Limberg
Abstract:
Bunches of high charge (up to 10 nC) are compressed in length in the CTF II magnetic chicane to less than 0.2 mm rms. The short bunches radiate coherently in the chicane magnetic field, and the horizontal and longitudinal phase space density distributions are affected. This paper reports the results of beam emittance and momentum measurements. Horizontal and vertical emittances and momentum spec…
▽ More
Bunches of high charge (up to 10 nC) are compressed in length in the CTF II magnetic chicane to less than 0.2 mm rms. The short bunches radiate coherently in the chicane magnetic field, and the horizontal and longitudinal phase space density distributions are affected. This paper reports the results of beam emittance and momentum measurements. Horizontal and vertical emittances and momentum spectra were measured for different bunch compression factors and bunch charges. In particular, for 10 nC bunches, the mean beam momentum decreased by about 5% while the FWHM momentum spread increased from 5% to 19%. The experimental results are compared with simulations made with the code TraFiC4.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.