Showing 1–3 of 3 results for author: Goldsby, D L

A Method for Calculating Attenuation in Creeping Materials

Authors: Ron Maor, Nir Z. Badt, Hugo N. Ulloa, David L. Goldsby

Abstract: The phase lag between an applied forcing and a response to that forcing is a fundamen tal parameter in geophysical signal processing. For solid deforming materials, the phase lag between an oscillatory applied stress and the resulting strain response encapsulates information about the dynamical behavior of materials and attenuation. The phase lag is not directly measured and must be extracted thro… ▽ More The phase lag between an applied forcing and a response to that forcing is a fundamen tal parameter in geophysical signal processing. For solid deforming materials, the phase lag between an oscillatory applied stress and the resulting strain response encapsulates information about the dynamical behavior of materials and attenuation. The phase lag is not directly measured and must be extracted through multiple steps by carefully comparing two time-series signals. The extracted value of the phase lag is highly sensitive to the analysis method, and often there are no comparable values to increase confidence in the calculated results. In this study, we propose a method for extracting the phase lag between two signals when either one or both include an underlying nonlinear trend, which is very common when measuring attenuation in creeping materials. We demonstrate the robustness of the method by analyzing artificial signals with known phases and quantifying their absolute and relative errors. We apply the method to two experimental datasets and compare our results with those of previous studies △ Less

Submitted 3 July, 2024; originally announced July 2024.

A nanoindentation study of attenuation in geological materials

Authors: Nir Z. Badt, Ron Maor, David L. Goldsby

Abstract: Viscoelastic behavior in geological materials controls a wide range of geophysical phenomena, such as mantle convection. We present a new method for measuring attenuation in single crystals of minerals and in reference materials over a frequency range of 1-1e-4 Hz via nanoindentation. In the experiments, we calculate the phase lag between a sinusoidal load applied to the tip of the nanoindenter an… ▽ More Viscoelastic behavior in geological materials controls a wide range of geophysical phenomena, such as mantle convection. We present a new method for measuring attenuation in single crystals of minerals and in reference materials over a frequency range of 1-1e-4 Hz via nanoindentation. In the experiments, we calculate the phase lag between a sinusoidal load applied to the tip of the nanoindenter and its displacement into and out of the tested sample, which provides a measure of the inverse quality factor 1/Q (i.e., attenuation) of the sample. Experiments were conducted on polymethyl methacrylate (PMMA), indium, halite, olivine and quartz. Attenuation spectrum from our tests on PMMA and indium are in excellent agreement with reported values from past studies. We quantified the natural damping of the nanoindenter and show that it becomes comparable to that of the samples at frequencies greater than 0.1 Hz, but is much lower at lower frequencies. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Dislocation interactions during low-temperature plasticity of olivine strengthen the lithospheric mantle

Authors: David Wallis, Lars. N. Hansen, Kathryn M. Kumamoto, Christopher A. Thom, Oliver Plümper, Markus Ohl, William B. Durham, David L. Goldsby, David E. J. Armstrong, Cameron D. Meyers, Rellie Goddard, Jessica M. Warren, Thomas Breithaupt, Martyn R. Drury, Angus J. Wilkinson

Abstract: The strength of the lithosphere is typically modelled based on constitutive equations for steady-state flow. However, models of lithospheric flexure reveal differences in lithospheric strength that are difficult to reconcile based on such flow laws. Recent rheological data from low-temperature deformation experiments on olivine suggest that this discrepancy may be largely explained by strain harde… ▽ More The strength of the lithosphere is typically modelled based on constitutive equations for steady-state flow. However, models of lithospheric flexure reveal differences in lithospheric strength that are difficult to reconcile based on such flow laws. Recent rheological data from low-temperature deformation experiments on olivine suggest that this discrepancy may be largely explained by strain hardening. Details of the mechanical data, specifically the effects of temperature-independent back stresses stored in the samples, indicate that strain hardening in olivine occurs primarily due to long-range elastic interactions between dislocations. These interpretations provided the basis for a new flow law that incorporates hardening by development of back stress. Here, we test this hypothesis by examining the microstructures of olivine samples deformed plastically at room temperature either in a deformation-DIA apparatus at differential stresses of < 4.3 GPa or in a nanoindenter at applied contact stresses of > 10.2 GPa. High-angular resolution electron backscatter diffraction maps reveal the presence of geometrically necessary dislocations with densities commonly above 10$^{14}$ m$^{-2}$ and intragranular heterogeneities in residual stress on the order of 1 GPa in both sets of samples. Scanning transmission electron micrographs reveal straight dislocations aligned along slip bands and interacting with dislocations of other types that act as obstacles. The stress heterogeneities and accumulations of dislocations along their slip planes are consistent with strain hardening resulting from long-range back-stresses acting between dislocations. These results corroborate the mechanical data in supporting the form of the new flow law for low-temperature plasticity and provide new microstructural criteria for identifying the operation of this deformation mechanism in natural samples. △ Less

Submitted 18 September, 2019; originally announced September 2019.