-
Systematic approach to measure the performance of microchannel-plate photomultipliers
Authors:
A. Lehmann,
M. Böhm,
M. Götz,
K. Gumbert,
S. Krauss,
D. Miehling,
M. Pfaffinger
Abstract:
In this paper, we present our approach to systematically measure numerous performance parameters of MCP-PMTs. The experimental setups, the analyses and selected results are discussed. Although the techniques used may be different in other locations, the document is intended as a guide for comparable measurements with other types of MCP-PMTs. Measurements are shown for the following performance par…
▽ More
In this paper, we present our approach to systematically measure numerous performance parameters of MCP-PMTs. The experimental setups, the analyses and selected results are discussed. Although the techniques used may be different in other locations, the document is intended as a guide for comparable measurements with other types of MCP-PMTs. Measurements are shown for the following performance parameters: spectral and spatial quantum efficiency, collection efficiency, gain as a function of voltage, position and magnetic field, time resolution, rate capability and lifetime. By using a dedicated 3-axis stepper and an FPGA-based DAQ system, also inner PMT parameters are measured as a function of the active area, such as relative detection efficiency, dark count rate, time resolution, recoil electron and afterpulse distributions, as well as charge sharing and electronic crosstalk. In addition, some of the parameters are investigated inside a strong magnetic field. For many of these measurements, the change of most setup parameters and the subsequent analysis can be controlled semi-automatically by software scripts.
△ Less
Submitted 4 July, 2024; v1 submitted 20 March, 2024;
originally announced March 2024.
-
Pre-examinations Improve Automated Metastases Detection on Cranial MRI
Authors:
Katerina Deike-Hofmann,
Dorottya Dancs,
Daniel Paech,
Heinz-Peter Schlemmer,
Klaus Maier-Hein,
Philipp Bäumer,
Alexander Radbruch,
Michael Götz
Abstract:
Materials and methods: First, a dual-time approach was assessed, for which the CNN was provided sequences of the MRI that initially depicted new MM (diagnosis MRI) as well as of a prediagnosis MRI: inclusion of only contrast-enhanced T1-weighted images (CNNdual_ce) was compared with inclusion of also the native T1-weighted images, T2-weighted images, and FLAIR sequences of both time points (CNNdua…
▽ More
Materials and methods: First, a dual-time approach was assessed, for which the CNN was provided sequences of the MRI that initially depicted new MM (diagnosis MRI) as well as of a prediagnosis MRI: inclusion of only contrast-enhanced T1-weighted images (CNNdual_ce) was compared with inclusion of also the native T1-weighted images, T2-weighted images, and FLAIR sequences of both time points (CNNdual_all).Second, results were compared with the corresponding single time approaches, in which the CNN was provided exclusively the respective sequences of the diagnosis MRI.Casewise diagnostic performance parameters were calculated from 5-fold cross-validation.
Results: In total, 94 cases with 494 MMs were included. Overall, the highest diagnostic performance was achieved by inclusion of only the contrast-enhanced T1-weighted images of the diagnosis and of a prediagnosis MRI (CNNdual_ce, sensitivity = 73%, PPV = 25%, F1-score = 36%). Using exclusively contrast-enhanced T1-weighted images as input resulted in significantly less false-positives (FPs) compared with inclusion of further sequences beyond contrast-enhanced T1-weighted images (FPs = 5/7 for CNNdual_ce/CNNdual_all, P < 1e-5). Comparison of contrast-enhanced dual and mono time approaches revealed that exclusion of prediagnosis MRI significantly increased FPs (FPs = 5/10 for CNNdual_ce/CNNce, P < 1e-9).Approaches with only native sequences were clearly inferior to CNNs that were provided contrast-enhanced sequences.
Conclusions: Automated MM detection on contrast-enhanced T1-weighted images performed with high sensitivity. Frequent FPs due to artifacts and vessels were significantly reduced by additional inclusion of prediagnosis MRI, but not by inclusion of further sequences beyond contrast-enhanced T1-weighted images. Future studies might investigate different change detection architectures for computer-aided detection.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Hairpin Motors for Electromobility: Twists and Bends of a Technological Breakthrough that Initially Arrived A Century Too Soon
Authors:
Stefan M. Goetz,
Ricardo Lizana F.,
Sebastian Rivera
Abstract:
There is currently a major trend to hairpin-winding motors for small and medium drives with increased power, specifically more torque density in the automotive industry. Practically all large players in the field either already use this winding technology or have announced doing so soon. However, hairpins, bar windings, and other segmented winding techniques are not purely a material and productio…
▽ More
There is currently a major trend to hairpin-winding motors for small and medium drives with increased power, specifically more torque density in the automotive industry. Practically all large players in the field either already use this winding technology or have announced doing so soon. However, hairpins, bar windings, and other segmented winding techniques are not purely a material and production issue. Instead their application to small drives influences all aspects of the design of machines, which are currently explored and studied by the industry. These range from not obvious gaps in the theory, parameter studies for maxima of efficiency, possible as well as advantageous winding schemes, thermal design, and ways to control ac losses to specific materials and process difficulties. Despite the apparent novelty of the trend, however, designers could revisit a widely forgotten knowledge base of more than 100 years for many of those questions. This old knowledge base and the understanding that many recently presented concepts have been developed earlier may speed up the technological development and appear to be a key to further innovation. Instead, many problems need to be solved again and technologies re-invented. Furthermore, as this technology has recently become merely industry-driven, a substantial portion of the information and technological developments are not available to the public -- a state that to our eyes may harm the innovation capacity of the drives community.
△ Less
Submitted 25 December, 2023;
originally announced December 2023.
-
Learning Tree Structures from Leaves For Particle Decay Reconstruction
Authors:
James Kahn,
Ilias Tsaklidis,
Oskar Taubert,
Lea Reuter,
Giulio Dujany,
Tobias Boeckh,
Arthur Thaller,
Pablo Goldenzweig,
Florian Bernlochner,
Achim Streit,
Markus Götz
Abstract:
In this work, we present a neural approach to reconstructing rooted tree graphs describing hierarchical interactions, using a novel representation we term the Lowest Common Ancestor Generations (LCAG) matrix. This compact formulation is equivalent to the adjacency matrix, but enables learning a tree's structure from its leaves alone without the prior assumptions required if using the adjacency mat…
▽ More
In this work, we present a neural approach to reconstructing rooted tree graphs describing hierarchical interactions, using a novel representation we term the Lowest Common Ancestor Generations (LCAG) matrix. This compact formulation is equivalent to the adjacency matrix, but enables learning a tree's structure from its leaves alone without the prior assumptions required if using the adjacency matrix directly. Employing the LCAG therefore enables the first end-to-end trainable solution which learns the hierarchical structure of varying tree sizes directly, using only the terminal tree leaves to do so. In the case of high-energy particle physics, a particle decay forms a hierarchical tree structure of which only the final products can be observed experimentally, and the large combinatorial space of possible trees makes an analytic solution intractable. We demonstrate the use of the LCAG as a target in the task of predicting simulated particle physics decay structures using both a Transformer encoder and a Neural Relational Inference encoder Graph Neural Network. With this approach, we are able to correctly predict the LCAG purely from leaf features for a maximum tree-depth of $8$ in $92.5\%$ of cases for trees up to $6$ leaves (including) and $59.7\%$ for trees up to $10$ in our simulated dataset.
△ Less
Submitted 1 September, 2022; v1 submitted 31 August, 2022;
originally announced August 2022.
-
Modular Pulse Synthesizer for Transcranial Magnetic Stimulation with Flexible User-Defined Pulse Shaping and Rapidly Changing Pulses in Sequences
Authors:
Z. Li,
J. Zhang,
A. V. Peterchev,
S. M. Goetz
Abstract:
The temporal shape of a pulse in transcranial magnetic stimulation (TMS) influences which neuron populations are activated preferentially as well as the strength and even direction of neuromodulation effects. Furthermore, various pulse shapes differ in their efficiency, coil heating, sensory perception, and clicking sound. However, the available TMS pulse shape repertoire is still very limited to…
▽ More
The temporal shape of a pulse in transcranial magnetic stimulation (TMS) influences which neuron populations are activated preferentially as well as the strength and even direction of neuromodulation effects. Furthermore, various pulse shapes differ in their efficiency, coil heating, sensory perception, and clicking sound. However, the available TMS pulse shape repertoire is still very limited to a few pulses with sinusoidal or near-rectangular shapes. Monophasic pulses, though found to be more selective and stronger in neuromodulation, are generated inefficiently and therefore only available in simple low-frequency repetitive protocols. Despite a strong interest to exploit the temporal effects of TMS pulse shapes and pulse sequences, waveform control is relatively inflexible and only possible parametrically within certain limits. Previously proposed approaches for flexible pulse shape control, such as through power electronic inverters, have significant limitations: Existing semiconductor switches can fail under the immense electrical stress associated with free pulse shaping, and most conventional power inverter topologies are incapable of generating smooth electric fields or existing pulse shapes. Leveraging intensive preliminary work on modular power electronics, we present a modular pulse synthesizer (MPS) technology that can, for the first time, flexibly generate high-power TMS pulses with user-defined electric field shape as well as rapid sequences of pulses with high output quality. The circuit topology breaks the problem of simultaneous high power and switching speed into smaller, manageable portions. MPS TMS can synthesize practically any pulse shape, including conventional ones, with fine quantization of the induced electric field.
△ Less
Submitted 14 February, 2022;
originally announced February 2022.
-
Stain-free Detection of Embryo Polarization using Deep Learning
Authors:
Cheng Shen,
Adiyant Lamba,
Meng Zhu,
Ray Zhang,
Changhuei Yang,
Magdalena Zernicka Goetz
Abstract:
Polarization of the mammalian embryo at the right developmental time is critical for its development to term and would be valuable in assessing the potential of human embryos. However, tracking polarization requires invasive fluorescence staining, impermissible in the in vitro fertilization clinic. Here, we report the use of artificial intelligence to detect polarization from unstained time-lapse…
▽ More
Polarization of the mammalian embryo at the right developmental time is critical for its development to term and would be valuable in assessing the potential of human embryos. However, tracking polarization requires invasive fluorescence staining, impermissible in the in vitro fertilization clinic. Here, we report the use of artificial intelligence to detect polarization from unstained time-lapse movies of mouse embryos. We assembled a dataset of bright-field movie frames from 8-cell-stage embryos, side-by-side with corresponding images of fluorescent markers of cell polarization. We then used an ensemble learning model to detect whether any bright-field frame showed an embryo before or after onset of polarization. Our resulting model has an accuracy of 85% for detecting polarization, significantly outperforming human volunteers trained on the same data (61% accuracy). We discovered that our self-learning model focuses upon the angle between cells as one known cue for compaction, which precedes polarization, but it outperforms the use of this cue alone. By compressing three-dimensional time-lapsed image data into two-dimensions, we are able to reduce data to an easily manageable size for deep learning processing. In conclusion, we describe a method for detecting a key developmental feature of embryo development that avoids clinically impermissible fluorescence staining.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Improvements of the programmable quantum current generator for better traceability of electrical current measurements
Authors:
Sophie Djordjevic,
Ralf Behr,
Dietmar Drung,
Martin Götz,
Wilfrid Poirier
Abstract:
A programmable quantum current generator based on the application of Ohm's law to quantum voltage and resistance standards has demonstrated a realization of the ampere from the elementary charge with a $10^{-8}$ relative uncertainty [J. Brun-Picard et al. PRX 6, 041051, 2016]. Here, we report on improvements of the device leading to a noise reduction of the generated quantized current. The improve…
▽ More
A programmable quantum current generator based on the application of Ohm's law to quantum voltage and resistance standards has demonstrated a realization of the ampere from the elementary charge with a $10^{-8}$ relative uncertainty [J. Brun-Picard et al. PRX 6, 041051, 2016]. Here, we report on improvements of the device leading to a noise reduction of the generated quantized current. The improved quantum current generator is used to calibrate different ammeters with lower measurement uncertainties. Besides, measurements of its quantized current using a calibrated Ultrastable Low-Noise Current Amplifier (ULCA) have shown that the realizations of the ampere at PTB (Physikalisch-Technische Bundesanstalt) and LNE (Laboratoire national de métrologie et d'essais) in the range $\pm50$ $μ$A agreed to -3.7 parts in $10^{7}$ with a combined standard uncertainty of 3.1 parts in $10^{7}$ (coverage factor $k_\mathrm{c}=1$).
△ Less
Submitted 9 June, 2021;
originally announced June 2021.
-
Double-containment coil with enhanced winding mounting for transcranial magnetic stimulation with reduced acoustic noise
Authors:
Lari M. Koponen,
Stefan M. Goetz,
Angel V. Peterchev
Abstract:
Objective: This work aims to reduce the acoustic noise level of transcranial magnetic stimulation (TMS) coils. TMS requires high currents (several thousand amperes) to be pulsed through the coil, which generates a loud acoustic impulse whose peak sound pressure level (SPL) can exceed 130 dB(Z). This sound poses a risk to hearing and elicits unwanted neural activation of auditory brain circuits. Me…
▽ More
Objective: This work aims to reduce the acoustic noise level of transcranial magnetic stimulation (TMS) coils. TMS requires high currents (several thousand amperes) to be pulsed through the coil, which generates a loud acoustic impulse whose peak sound pressure level (SPL) can exceed 130 dB(Z). This sound poses a risk to hearing and elicits unwanted neural activation of auditory brain circuits. Methods: We propose a new double-containment coil with enhanced winding mounting (DCC), which utilizes acoustic impedance mismatch to contain and dissipate the impulsive sound within an air-tight outer casing. The coil winding is potted in a rigid block, which is mounted to the outer casing by its acoustic nodes that are subject to minimum vibration during the pulse. The rest of the winding block is isolated from the casing by an air gap, and sound is absorbed by foam within the casing. The casing thickness under the winding center is minimized to maximize the coil electric field output. Results: Compared to commercial figure-of-eight TMS coils, the DCC prototype has 10-33 dB(Z) lower SPL at matched stimulation strength, whilst providing 22% higher maximum stimulation strength than equally focal commercial coils. Conclusion: The DCC design greatly reduces the acoustic noise of TMS while increasing the achievable stimulation strength. Significance: The acoustic noise reduction from our coil design is comparable to that provided by typical hearing protection devices. This coil design approach can enhance hearing safety and reduce auditory co-activations in the brain and other detrimental effects of TMS sound.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Integration of Simultaneous Resting-State Electroencephalography, Functional Magnetic Resonance Imaging, and Eye-Tracker Methods to Determine and Verify Electroencephalography Vigilance Measure
Authors:
Ahmad Mayeli,
Obada Al Zoubi,
Masaya Misaki,
Jennifer L. Stewart,
Vadim Zotev,
Qingfei Luo,
Raquel Phillips,
Stefan Fischer,
Marcus Goetz,
Martin P. Paulus,
Hazem Refai,
Jerzy Bodurka
Abstract:
Background/Introduction: Concurrent electroencephalography and resting-state functional magnetic resonance imaging (rsfMRI) have been widely used for studying the (presumably) awake and alert human brain with high temporal/spatial resolution. Although rsfMRI scans are typically collected while individuals are instructed to focus their eyes on a fixated cross, objective and verified experimental me…
▽ More
Background/Introduction: Concurrent electroencephalography and resting-state functional magnetic resonance imaging (rsfMRI) have been widely used for studying the (presumably) awake and alert human brain with high temporal/spatial resolution. Although rsfMRI scans are typically collected while individuals are instructed to focus their eyes on a fixated cross, objective and verified experimental measures to quantify degree of vigilance are not readily available. Electroencephalography (EEG) is the modality extensively used for estimating vigilance, especially during eyes-closed resting state. However, pupil size measured using an eye-tracker device could provide an indirect index of vigilance. Methods: Three 12-min resting scans (eyes open, fixating on the cross) were collected from 10 healthy control participants. We simultaneously collected EEG, fMRI, physiological, and eye-tracker data and investigated the correlation between EEG features, pupil size, and heart rate. Furthermore, we used pupil size and EEG features as regressors to find their correlations with blood-oxygen-level-dependent fMRI measures. Results: EEG frontal and occipital beta power (FOBP) correlates with pupil size changes, an indirect index for locus coeruleus activity implicated in vigilance regulation (r = 0.306, p < 0.001). Moreover, FOBP also correlated with heart rate (r = 0.255, p < 0.001), as well as several brain regions in the anticorrelated network, including the bilateral insula and inferior parietal lobule. Discussion: In this study, we investigated whether simultaneous EEG-fMRI combined with eye-tracker measurements can be used to determine EEG signal feature associated with vigilance measures during eyes-open rsfMRI. Our results support the conclusion that FOBP is an objective measure of vigilance in healthy human subjects.
△ Less
Submitted 19 June, 2021; v1 submitted 10 December, 2019;
originally announced December 2019.
-
Heterogeneities Shape Passive Intracellular Transport
Authors:
P. Witzel,
M. Götz,
Y. Lanoiselée,
T. Franosch,
D. S. Grebenkov,
D. Heinrich
Abstract:
A living cell's interior is one of the most complex and intrinsically dynamic systems, providing an elaborate interplay between cytosolic crowding and ATP-driven motion, which controls cellular functionality. Here, we investigated two distinct fundamental features of the merely passive, not-bio-motor shuttled material transport within the cytoplasm of Dictyostelium discoideum cells: the anomalous…
▽ More
A living cell's interior is one of the most complex and intrinsically dynamic systems, providing an elaborate interplay between cytosolic crowding and ATP-driven motion, which controls cellular functionality. Here, we investigated two distinct fundamental features of the merely passive, not-bio-motor shuttled material transport within the cytoplasm of Dictyostelium discoideum cells: the anomalous non-linear scaling of the mean-squared displacement of a 150nm-diameter particle and non-Gaussian distribution of increments. Relying on single-particle tracking data of 320,000 data points, we performed a systematic analysis of four possible origins for non-Gaussian transport: (1) sample-based variability, (2) rare occurring strong motion events, (3) ergodicity breaking/ageing, and (4) spatio-temporal heterogeneities of the intracellular medium. After excluding the first three reasons, we investigated the remaining hypothesis of a heterogeneous cytoplasm as cause for non-Gaussian transport. A novel fit model with randomly distributed diffusivities implementing medium heterogeneities suits the experimental data. Strikingly, the non-Gaussian feature is independent of the cytoskeleton condition and lag time. This reveals that efficiency and consistency of passive intracellular transport and the related anomalous scaling of the mean-squared displacement are regulated by cytoskeleton components, while cytoplasmic heterogeneities are responsible for the generic, non-Gaussian distribution of increments.
△ Less
Submitted 12 November, 2019;
originally announced November 2019.
-
Inter-laboratory nanoamp current comparison with sub-part-per-million uncertainty
Authors:
Stephen Giblin,
Dietmar Drung,
Martin Goetz,
Hansjoerg Scherer
Abstract:
An ultrastable low-noise current amplifier (ULCA) has been transferred between two laboratories, NPL and PTB, four times, with three of the transfers yielding a relative change in the trans-resistance gain of less than $2 \times 10^{-7}$. This is a new bench-mark for inter-laboratory transfer of small current. We describe in detail the use of a cryogenic current comparator to calibrate the ULCA at…
▽ More
An ultrastable low-noise current amplifier (ULCA) has been transferred between two laboratories, NPL and PTB, four times, with three of the transfers yielding a relative change in the trans-resistance gain of less than $2 \times 10^{-7}$. This is a new bench-mark for inter-laboratory transfer of small current. We describe in detail the use of a cryogenic current comparator to calibrate the ULCA at NPL, and the use of the ULCA to measure $1$ G$Ω$ resistors with relative uncertainties at the $10^{-7}$ level.
△ Less
Submitted 29 August, 2018;
originally announced August 2018.
-
Electrometer calibration with sub-part-per-million uncertainty
Authors:
Hansjörg Scherer,
Dietmar Drung,
Christian Krause,
Martin Götz,
Ulrich Becker
Abstract:
We performed calibrations of four different commercial picoammeters using the Ultrastable Low-noise Current Amplifier (ULCA) as a calibrator current source operated in the range between 1 femtoampere and 1 microampere. The results allow the comprehensive characterization of the devices under test regarding noise, settling and burden voltage behavior as well as stability of the gain factor, and con…
▽ More
We performed calibrations of four different commercial picoammeters using the Ultrastable Low-noise Current Amplifier (ULCA) as a calibrator current source operated in the range between 1 femtoampere and 1 microampere. The results allow the comprehensive characterization of the devices under test regarding noise, settling and burden voltage behavior as well as stability of the gain factor, and confirm the performance of the ULCA for use as small-current calibrator standard. Also, we present a further advanced setup for the calibration of transimpedance amplifiers. Accuracy limits for best electrometer calibrations in the current range between 1 femtoampere and 1 microampere and possible implications on corresponding calibration and measurement capabilities are discussed.
△ Less
Submitted 22 November, 2018; v1 submitted 27 August, 2018;
originally announced August 2018.
-
Conformational dynamics of a single protein monitored for 24 hours at video rate
Authors:
Weixiang Ye,
Markus Götz,
Sirin Celiksoy,
Laura Tüting,
Christoph Ratzke,
Janak Prasad,
Rubén Ahijado-Guzmán,
Thorsten Hugel,
Carsten Sönnichsen
Abstract:
We use plasmon rulers to follow the conformational dynamics of a single protein for up to 24 h at a video rate. The plasmon ruler consists of two gold nanospheres connected by a single protein linker. In our experiment, we follow the dynamics of the molecular chaperone heat shock protein 90, which is known to show open and closed conformations. Our measurements confirm the previously known conform…
▽ More
We use plasmon rulers to follow the conformational dynamics of a single protein for up to 24 h at a video rate. The plasmon ruler consists of two gold nanospheres connected by a single protein linker. In our experiment, we follow the dynamics of the molecular chaperone heat shock protein 90, which is known to show open and closed conformations. Our measurements confirm the previously known conformational dynamics with transition times in the second to minute time scale and reveals new dynamics on the time scale of minutes to hours. Plasmon rulers thus extend the observation bandwidth 3/4 orders of magnitude with respect to single-molecule fluorescence resonance energy transfer and enable the study of molecular dynamics with unprecedented precision.
△ Less
Submitted 5 October, 2018; v1 submitted 19 June, 2018;
originally announced June 2018.
-
Zero-field quantum anomalous Hall metrology as a step towards a universal quantum standard unit system
Authors:
Martin Goetz,
Kajetan M. Fijalkowski,
Eckart Pesel,
Matthias Hartl,
Steffen Schreyeck,
Martin Winnerlein,
Stefan Grauer,
Hansjoerg Scherer,
Karl Brunner,
Charles Gould,
Franz J. Ahlers,
Laurens W. Molenkamp
Abstract:
In the quantum anomalous Hall effect, the edge states of a ferromagnetically doped topological insulator exhibit quantized Hall resistance and dissipationless transport at zero magnetic field. Up to now, however, the resistance was experimentally assessed with standard transport measurement techniques which are difficult to trace to the von-Klitzing constant R$_K$ with high precision. Here, we pre…
▽ More
In the quantum anomalous Hall effect, the edge states of a ferromagnetically doped topological insulator exhibit quantized Hall resistance and dissipationless transport at zero magnetic field. Up to now, however, the resistance was experimentally assessed with standard transport measurement techniques which are difficult to trace to the von-Klitzing constant R$_K$ with high precision. Here, we present a metrologically comprehensive measurement, including a full uncertainty budget, of the resistance quantization of V-doped (Bi,Sb)$_2$Te$_3$ devices without external magnetic field. We established as a new upper limit for a potential deviation of the quantized anomalous Hall resistance from RK a value of 0.26 +- 0.22 ppm, the smallest and most precise value reported to date. This provides another major step towards realization of the zero-field quantum resistance standard which in combination with Josephson effect will provide the universal quantum units standard in the future.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Precision and accuracy of single-molecule FRET measurements - a worldwide benchmark study
Authors:
Björn Hellenkamp,
Sonja Schmid,
Olga Doroshenko,
Oleg Opanasyuk,
Ralf Kühnemuth,
Soheila Rezaei Adariani,
Anders Barth,
Victoria Birkedal,
Mark E. Bowen,
Hongtao Chen,
Thorben Cordes,
Tobias Eilert,
Carel Fijen,
Markus Götz,
Giorgos Gouridis,
Enrico Gratton,
Taekjip Ha,
Christian A. Hanke,
Andreas Hartmann,
Jelle Hendrix,
Lasse L. Hildebrandt,
Johannes Hohlbein,
Christian G. Hübner,
Eleni Kallis,
Achillefs N. Kapanidis
, et al. (28 additional authors not shown)
Abstract:
Single-molecule Förster resonance energy transfer (smFRET) is increasingly being used to determine distances, structures, and dynamics of biomolecules in vitro and in vivo. However, generalized protocols and FRET standards ensuring both the reproducibility and accuracy of measuring FRET efficiencies are currently lacking. Here we report the results of a worldwide, comparative, blind study, in whic…
▽ More
Single-molecule Förster resonance energy transfer (smFRET) is increasingly being used to determine distances, structures, and dynamics of biomolecules in vitro and in vivo. However, generalized protocols and FRET standards ensuring both the reproducibility and accuracy of measuring FRET efficiencies are currently lacking. Here we report the results of a worldwide, comparative, blind study, in which 20 labs determined the FRET efficiencies of several dye-labeled DNA duplexes. Using a unified and straightforward method, we show that FRET efficiencies can be obtained with a standard deviation between $Δ$E = +-0.02 and +-0.05. We further suggest an experimental and computational procedure for converting FRET efficiencies into accurate distances. We discuss potential uncertainties in the experiment and the modelling. Our extensive quantitative assessment of intensity-based smFRET measurements and correction procedures serve as an essential step towards validation of distance networks with the ultimate aim to archive reliable structural models of biomolecular systems obtained by smFRET-based hybrid methods.
△ Less
Submitted 29 December, 2017; v1 submitted 10 October, 2017;
originally announced October 2017.
-
Validation of the ultrastable low-noise current amplifier as travelling standard for small direct currents
Authors:
Dietmar Drung,
Christian Krause,
Stephen P. Giblin,
Sophie Djordjevic,
Francois Piquemal,
Olivier Séron,
Florentin Rengnez,
Martin Götz,
Eckart Pesel,
Hansjörg Scherer
Abstract:
An interlaboratory comparison of small-current generation and measurement capability is presented with the ultrastable low-noise current amplifier (ULCA) acting as travelling standard. Various measurements at direct currents between 0.16 nA and 13 nA were performed to verify the degree of agreement between the three national metrology institutes involved in the study. Consistency well within one p…
▽ More
An interlaboratory comparison of small-current generation and measurement capability is presented with the ultrastable low-noise current amplifier (ULCA) acting as travelling standard. Various measurements at direct currents between 0.16 nA and 13 nA were performed to verify the degree of agreement between the three national metrology institutes involved in the study. Consistency well within one part per million (ppm) was found. Due to harsh environmental conditions during shipment, the ULCA's transfer accuracy had been limited to about +/-0.4 ppm. Supplemental measurements performed at PTB indicate that further improvements in accuracy are possible. Relative uncertainties of 0.1 ppm are achieved by applying on-site calibration of the ULCA with a suitable cryogenic current comparator.
△ Less
Submitted 1 July, 2015;
originally announced July 2015.
-
Traceable precision pA direct current measurements with the ULCA
Authors:
Hansjörg Scherer,
Gerd-Dietmar Willenberg,
Dietmar Drung,
Martin Götz,
Eckart Pesel
Abstract:
A standard method for picoammeter calibrations is the capacitor charging technique, which allows generating traceable currents in the sub-nA range. However, its accuracy is limited by the ac-dc differences of the capacitances involved. The Ultrastable Low-noise Current Amplifier (ULCA) is a novel high-precision amperemeter for direct current measurements in the pA range, developed at PTB. Its ampl…
▽ More
A standard method for picoammeter calibrations is the capacitor charging technique, which allows generating traceable currents in the sub-nA range. However, its accuracy is limited by the ac-dc differences of the capacitances involved. The Ultrastable Low-noise Current Amplifier (ULCA) is a novel high-precision amperemeter for direct current measurements in the pA range, developed at PTB. Its amplifier stages, based on resistor networks and op-amps, can be calibrated traceably with a cryogenic current comparator (CCC) system. We compare the results from both independent calibration routes for two different ULCA prototypes. We find agreement between both methods at an uncertainty level below 10 microA/A, limited by the uncertainty of the currents generated with the capacitor charging method. The investigations confirm the superior performance of the new ULCA picoammeter.
△ Less
Submitted 6 August, 2014; v1 submitted 21 July, 2014;
originally announced July 2014.
-
Traceable precision generation and measurement of pA direct currents
Authors:
Hansjörg Scherer,
Gerd-Dietmar Willenberg,
Dietmar Drung,
Martin Götz,
Eckart Pesel
Abstract:
We present the comparison of results from the generation and the measurement of direct currents in the pA range, performed with traceable state-of-the-art methods at highest accuracy. The currents were generated with the capacitor charging method, and measured with the first prototype of a novel picoammeter developed at PTB. The results confirm the agreement between both methods and the linearity…
▽ More
We present the comparison of results from the generation and the measurement of direct currents in the pA range, performed with traceable state-of-the-art methods at highest accuracy. The currents were generated with the capacitor charging method, and measured with the first prototype of a novel picoammeter developed at PTB. The results confirm the agreement between both methods and the linearity of the new picoammeter at an uncertainty level of few microA/A. Also, they shed light on the ac-dc difference of capacitors, crucial for current generation with the capacitor charging method.
△ Less
Submitted 18 June, 2014;
originally announced June 2014.
-
Analysis and Optimisation of Pulse Dynamics for Magnetic Stimulation
Authors:
Stefan M. Goetz,
Nam C. Truong,
Manuel G. Gerhofer,
Thomas Weyh,
Hans-Georg Herzog
Abstract:
Magnetic stimulation is a standard tool in brain research and many fields of neurology, as well as psychiatry. From a physical perspective, one key aspect of this method is the inefficiency of available setups. Whereas the spatial field properties have been studied rather intensively with coil designs, the dynamics have been neglected almost completely for a long time. Instead, the devices and the…
▽ More
Magnetic stimulation is a standard tool in brain research and many fields of neurology, as well as psychiatry. From a physical perspective, one key aspect of this method is the inefficiency of available setups. Whereas the spatial field properties have been studied rather intensively with coil designs, the dynamics have been neglected almost completely for a long time. Instead, the devices and their technology defined the waveform. Here, an analysis of the waveform space is performed. Based on these data, an appropriate optimisation approach is outlined which makes use of a modern nonlinear axon description of a mammalian motor nerve. The approach is based on a hybrid global-local method; different coordinate systems for describing the continuous waveforms in a limited parameter space are defined for sufficient stability. The results of the numeric setup suggest that there is plenty of room for waveforms with higher efficiency than the traditional shapes. One class of such pulses is analysed further. Although the voltage profile of these waveforms is almost rectangular, the current shape presents distinct characteristics, such as a first phase which precedes the main pulse and decreases the losses. The single representatives, which differ in their maximum voltage shape, are linked by a nonlinear transformation. The main phase, however, seems to scale in time only.
△ Less
Submitted 17 June, 2011;
originally announced June 2011.
