Showing 1–50 of 58 results for author: Fischer, A

Single-mode emission by phase-delayed coupling between nano-lasers

Authors: T. V. Raziman, Anna Fischer, Riccardo Nori, Anthony Chan, Wai Kit Ng, Dhruv Saxena, Ortwin Hess, Korneel Molkens, Ivo Tanghe, Pieter Geiregat, Dries Van Thourhout, Mauricio Barahona, Riccardo Sapienza

Abstract: Near-field coupling between nanolasers enables collective high-power lasing but leads to complex spectral reshaping and multimode operation, limiting the emission brightness, spatial coherence and temporal stability. Many lasing architectures have been proposed to circumvent this limitation, based on symmetries, topology, or interference. We show that a much simpler and robust method exploiting ph… ▽ More Near-field coupling between nanolasers enables collective high-power lasing but leads to complex spectral reshaping and multimode operation, limiting the emission brightness, spatial coherence and temporal stability. Many lasing architectures have been proposed to circumvent this limitation, based on symmetries, topology, or interference. We show that a much simpler and robust method exploiting phase-delayed coupling, where light exchanged by the lasers carries a phase, can enable stable single-mode operation. Phase-delayed coupling changes the modal amplification: for pump powers close to the anyonic parity-time (PT) symmetric exceptional point, a high phase delay completely separates the mode thresholds, leading to single mode operation. This is shown by stability analysis with nonlinear coupled mode theory and stochastic differential equations for two coupled nanolasers and confirmed by realistic semi-analytical treatment of a dimer of lasing nanospheres. Finally, we extend the mode control to large arrays of nanolasers, featuring lowered thresholds and higher power. Our work promises a novel solution to engineer bright and stable single-mode lasing from nanolaser arrays with important applications in photonic chips for communication and lidars. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Surface lattice resonance lasers with epitaxial InP gain medium

Authors: Anna Fischer, Toby Severs Millard, Xiaofei Xiao, T. V. Raziman, Jakub Dranczewski, Ross C. Schofield, Heinz Schmid, Kirsten Moselund, Riccardo Sapienza, Rupert Oulton

Abstract: Surface lattice resonance (SLR) lasers, where gain is supplied by a thin film active material and the feedback comes from multiple scattering by plasmonic nanoparticles, have shown both low threshold lasing and tunability of the angular and spectral emission. However, typically used materials such as organic dyes and QD films suffer from photo-degradation which hampers practical applications. Here… ▽ More Surface lattice resonance (SLR) lasers, where gain is supplied by a thin film active material and the feedback comes from multiple scattering by plasmonic nanoparticles, have shown both low threshold lasing and tunability of the angular and spectral emission. However, typically used materials such as organic dyes and QD films suffer from photo-degradation which hampers practical applications. Here, we demonstrate photo-stable single-mode lasing of SLR modes sustained in an epitaxial solid-state InP slab waveguide. The nanoparticle array is weakly coupled to the optical modes, which decreases the scattering losses and hence the experimental lasing threshold is as low as 90 $μ$J/cm$^{2}$. The nanoparticle periodicity defines the lasing wavelength and enables tuneable emission wavelengths over a 70 nm spectral range. Combining plasmonic nanoparticles with an epitaxial solid-state gain medium paves the way for large-area on-chip integrated SLR lasers for applications including optical communication, optical computing, sensing, and LiDAR. △ Less

Submitted 11 March, 2024; originally announced March 2024.

Controlling lasing around Exceptional Points in Coupled Nanolasers

Authors: Anna Fischer, T. V. Raziman, Wai Kit Ng, Jente Clarysse, Jakub Dranczewski, Dhruv Saxena, Stefano Vezzoli, Heinz Schmid, Kirsten Moselund, Riccardo Sapienza

Abstract: Coupled nanolasers are of growing interest for on-chip optical computation and data transmission, which requires an understanding of how lasers interact to form complex systems. The non-Hermitian interaction between two coupled resonators, when excited selectively, can lead to parity-time symmetry, the formation of exceptional points, and subsequently spectral control and increased sensitivity. Th… ▽ More Coupled nanolasers are of growing interest for on-chip optical computation and data transmission, which requires an understanding of how lasers interact to form complex systems. The non-Hermitian interaction between two coupled resonators, when excited selectively, can lead to parity-time symmetry, the formation of exceptional points, and subsequently spectral control and increased sensitivity. These investigations have been limited to pump energies close to the lasing threshold, and large or narrow-line lasers. Here, by programmable optical excitation we study two coupled nanolasers significantly above threshold, where mode instability plays an important role. We map the mode evolution around two exceptional points, and observe lasing gaps due to reversed pump dependence which compare well with nonlinear theory. Finally, the coupling can be exploited to control the lasing threshold and wavelength, and for frequency switching around the lasing gap. Controlled and integrated nanolasers constitutes a promising platform for future highly sensitive and programmable on-chip laser sources. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 8 pages, 4 figures

Towards indirect assessment of surface anomalies on wind turbine rotor blades

Authors: Daniel Feldmann, Felix Oehme, Lennart von Germersheim, Ruben Lopez Parras, Andreas Fischer, Marc Avila

Abstract: We present results from novel field, lab and computer studies, that pave the way towards non-invasive classification of localised surface defects on running wind turbine rotors using infrared thermography (IRT). In particular, we first parametrise the problem from a fluid dynamical point of view using the roughness Reynolds number ($Re_k$) and demonstrate how the parameter regime relevant for mode… ▽ More We present results from novel field, lab and computer studies, that pave the way towards non-invasive classification of localised surface defects on running wind turbine rotors using infrared thermography (IRT). In particular, we first parametrise the problem from a fluid dynamical point of view using the roughness Reynolds number ($Re_k$) and demonstrate how the parameter regime relevant for modern wind turbines translate to parameter values that are currently feasible in typical wind tunnel and computer experiments. Second, we discuss preparatory wind tunnel and field measurements, that demonstrate a promising degree of sensitivity of the recorded IRT data w.r.t. the key control parameter ($Re_k$), which is a minimum requirement for the proposed classification technique to work. Third, we introduce and validate a local domain ansatz for future computer experiments, that enables well-resolved Navier-Stokes simulations for the target parameter regime at reasonable computational costs. △ Less

Submitted 11 February, 2023; originally announced February 2023.

Comments: 10 pages, 4 figures, Proceedings of the 23. DGLR-Fachsymposium der STAB

Understanding The Reversible Electrodeposition of Al in Low-Cost Room Temperature Molten Salts

Authors: Regina Garcia-Mendez, Jingxu Zheng, David C. Bock, Cherno Jaye, Daniel A. Fischer, Amy C. Marschilok, Kenneth J. Takeuchi, Esther S. Takeuchi, Lynden A. Archer

Abstract: Aluminum is the most earth-abundant metal, is trivalent, is inert in ambient humid air, and has a density approximately four-times that of lithium at room temperature. These attributes make it an attractive material for cost-effective, long-duration storage of electrical energy in batteries. Scientific discoveries in the past decade have established that secondary Al batteries can be created by pa… ▽ More Aluminum is the most earth-abundant metal, is trivalent, is inert in ambient humid air, and has a density approximately four-times that of lithium at room temperature. These attributes make it an attractive material for cost-effective, long-duration storage of electrical energy in batteries. Scientific discoveries in the past decade have established that secondary Al batteries can be created by paring an Al anode with a graphite or transition metal oxide cathode, in imidazolium-based, room-temperature ionic-liquid-Aluminum chloride electrolytes. Here we report findings from a systematic study that sheds light on the structural requirements, physicochemical, and transport properties of the ionic liquid electrolytes responsible for the high reversibility of Al battery anodes. We find that the most important interfacial and transport properties of these electrolytes can be achieved in other electrolytes, including ammonium-based molten salts that are available at costs as much as twenty-times lower than the ionic liquid-Aluminum chloride melt. High Al reversibility in ammonium- and imidazolium-based electrolytes is specifically shown to require a critical ratio of the solvation species, where Lewis acidity and beneficial interfacial reactions continuously etch the alumina resistive interfacial layer and form beneficial solid electrolyte interphase at the anode. We report further that successful development of new electrolyte families that support high Al anode reversibility also provides a good platform for detailed studies of the working mechanisms of an intercalation graphite cathode using X-ray absorption spectroscopy. Our findings therefore open new opportunities for developing simple, cost-effective, room-temperature Al batteries that enable long-duration electrical energy storage. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: 44 pages, 26 figures, 1 table

Report number: 101452

Journal ref: Cell Reports Physical Science 4,101452 June 21 2023

Using metal-organic frameworks to confine liquid samples for nanoscale NV-NMR

Authors: Kristina S. Liu, Xiaoxin Ma, Roberto Rizzato, Anna-Lisa Semrau, Alex Henning, Ian D. Sharp, Roland A. Fischer, Dominik. B. Bucher

Abstract: Atomic-scale magnetic field sensors based on nitrogen vacancy (NV) defects in diamonds are an exciting platform for nanoscale nuclear magnetic resonance (NMR) spectroscopy. The detection of NMR signals from a few zeptoliters to single molecules or even single nuclear spins has been demonstrated using NV-centers close to the diamond surface. However, fast molecular diffusion of sample molecules in… ▽ More Atomic-scale magnetic field sensors based on nitrogen vacancy (NV) defects in diamonds are an exciting platform for nanoscale nuclear magnetic resonance (NMR) spectroscopy. The detection of NMR signals from a few zeptoliters to single molecules or even single nuclear spins has been demonstrated using NV-centers close to the diamond surface. However, fast molecular diffusion of sample molecules in and out of nanoscale detection volumes impedes their detection and limits current experiments to solid-state or highly viscous samples. Here, we show that restricting diffusion by confinement enables nanoscale NMR spectroscopy of liquid samples. Our approach uses metal-organic frameworks (MOF) with angstrom-sized pores on a diamond chip to trap sample molecules near the NV-centers. This enables the detection of NMR signals from a liquid sample, which would not be detectable without confinement. These results set the route for nanoscale liquid-phase NMR with high spectral resolution. △ Less

Submitted 15 September, 2022; v1 submitted 12 September, 2022; originally announced September 2022.

Comments: Affiliations: Technical University of Munich, Walter Schottky Institute and Physics Department

Nonlinearity of the post-spinel transition and its expression in slabs and plumes worldwide

Authors: Junjie Dong, Rebecca A. Fischer, Lars Stixrude, Matthew C. Brennan, Kierstin Daviau, Terry-Ann Suer, Katlyn M. Turner, Yue Meng, Vitali B. Prakapenka

Abstract: At the interface of Earth's upper and lower mantle, the post-spinel transition boundary controls the dynamics and morphologies of downwelling slabs and upwelling plumes, and its Clapeyron slope is hence one of the most important constraints on mantle convection. In this study, we reported a new in situ experimental dataset on phase stability in Mg$_{2}$SiO$_{4}$ at mantle transition zone pressures… ▽ More At the interface of Earth's upper and lower mantle, the post-spinel transition boundary controls the dynamics and morphologies of downwelling slabs and upwelling plumes, and its Clapeyron slope is hence one of the most important constraints on mantle convection. In this study, we reported a new in situ experimental dataset on phase stability in Mg$_{2}$SiO$_{4}$ at mantle transition zone pressures from laser-heated diamond anvil cell experiments, along with a compilation of corrected in situ experimental datasets from the literature. We presented a machine learning framework for high-pressure phase diagram determination and focused on its application to constrain the location and Clapeyron slope of the post-spinel transition: ringwoodite $\leftrightarrow$ bridgmanite + periclase. We found that the post-spinel boundary is nonlinear and its Clapeyron slope varies locally from $-2.3_{-1.4}^{+0.6}$ MPa/K at 1900 K, to $-1.0_{-1.7}^{+1.3}$ MPa/K at 1700 K, and to $0.0_{-2.0}^{+1.7}$ MPa/K at 1500 K. We applied the temperature-dependent post-spinel Clapeyron slope to estimate its lateral variation across the "660-km" seismic discontinuity in subducting slabs and hotspot-associated plumes worldwide, as well as the ambient mantle. We found that, in the present-day mantle, the average post spinel Clapeyron slope in the plumes is three times more negative than that in slabs, and we then discussed the effects of a nonlinear post-spinel transition on the dynamics of Earth's mantle. △ Less

Submitted 18 August, 2022; originally announced August 2022.

Comments: 42 pages, 6500 words and 5 figures in the main text, and 1 supplement with 6 texts, 5 figures, and 6 tables

Water storage capacity of the Martian mantle through time

Authors: Junjie Dong, Rebecca A. Fischer, Lars P. Stixrude, Carolina R. Lithgow-Bertelloni, Zachary T. Eriksen, Matthew C. Brennan

Abstract: Water has been stored in the Martian mantle since its formation, primarily in nominally anhydrous minerals. The short-lived early hydrosphere and intermittently flowing water on the Martian surface may have been supplied and replenished by magmatic degassing of water from the mantle. Estimating the water storage capacity of the solid Martian mantle places important constraints on its water invento… ▽ More Water has been stored in the Martian mantle since its formation, primarily in nominally anhydrous minerals. The short-lived early hydrosphere and intermittently flowing water on the Martian surface may have been supplied and replenished by magmatic degassing of water from the mantle. Estimating the water storage capacity of the solid Martian mantle places important constraints on its water inventory and helps elucidate the sources, sinks, and temporal variations of water on Mars. In this study, we applied a bootstrap aggregation method to investigate the effects of iron on water storage capacities in olivine, wadsleyite, and ringwoodite, based on high-pressure experimental data compiled from the literature, and we provide a quantitative estimate of the upper bound of the bulk water storage capacity in the FeO-rich solid Martian mantle. Along a series of areotherms at different mantle potential temperatures ($T_{p}$), we estimated a water storage capacity equal to $9.0_{-2.2} ^{+2.8}$ km Global Equivalent Layer (GEL) for the present-day Martian mantle at $T_{p}$ = 1600 K and $4.9_{-1.5}^{+1.7}$ km GEL for the initial Martian mantle at $T_{p}$ = 1900 K. The water storage capacity of the Martian mantle increases with secular cooling through time, but due to the lack of an efficient water recycling mechanism on Mars, its actual mantle water content may be significantly lower than its water storage capacity today. △ Less

Submitted 30 May, 2022; originally announced May 2022.

Comments: 52 pages including supplementary materials, 14 figures, 13 tables; manuscript accepted for publication in Icarus

Measurement error of tracer-based velocimetry in single-phase turbulent flows with inhomogeneous refractive indices

Authors: Huixin Li, Andreas Fischer, Marc Avila, Duo Xu

Abstract: Inhomogeneous refractive index fields lead to errors in optical flow velocity measurements. Former respective studies are mostly in quasi two-dimensional flows, and attribute the measurement errors to spatial gradients in the refractive index field, while less attention has been paid to flows with three-dimensional refractive index fields which usually change in space and in time. In this study, r… ▽ More Inhomogeneous refractive index fields lead to errors in optical flow velocity measurements. Former respective studies are mostly in quasi two-dimensional flows, and attribute the measurement errors to spatial gradients in the refractive index field, while less attention has been paid to flows with three-dimensional refractive index fields which usually change in space and in time. In this study, ray tracing simulations were carried out in a three-dimensional flow, which is from a direct numerical simulation of single-phase turbulent mixing of two fluids. Given the data of the numerical simulation as reference, the ray tracing simulation is used to quantify the measurement errors of the flow velocity and flow acceleration for tracer-based velocimetry, i.e. particle tracking velocimetry in this study. The errors of both flow velocity and flow acceleration are attributed to the spatial and the spatio-temporal gradients of the refractive indices, respectively, which are closely inherited from flow characteristics. While the dominant type of error depends on the studied flow, the main measurement error for the considered turbulent mixing flow is caused by the random error. When the maximum spatial difference of the refractive indices is about 10 to the power of -6, the relative random measurement error is about 1 % in velocity and about 200 % in acceleration, respectively. When the maximum index difference is about 0.01 (water), the relative random measurement errors of velocity and acceleration are 2000 % and 100,000%, respectively, for the flow considered in this study. △ Less

Submitted 18 May, 2022; originally announced May 2022.

A simple strategy to measure the contact resistance between metals and doped organic films

Authors: Anton Kirch, Axel Fischer, Robert Werberger, Shayan Miri Aabi Soflaa, Karolina Maleckaite, Paulius Imbrasas, Johannes Benduhn, Sebastian Reineke

Abstract: Charge injection from electrodes into doped organic films is a widespread technology used in the majority of state-of-the-art organic semiconductor devices. Although such interfaces are commonly considered to form Ohmic contacts via strong band bending, an experiment that directly measures the contact resistance has not yet been demonstrated. In this study, we use a simple metal/doped organic semi… ▽ More Charge injection from electrodes into doped organic films is a widespread technology used in the majority of state-of-the-art organic semiconductor devices. Although such interfaces are commonly considered to form Ohmic contacts via strong band bending, an experiment that directly measures the contact resistance has not yet been demonstrated. In this study, we use a simple metal/doped organic semiconductor/metal stack and study its voltage-dependent resistance. A transport layer thickness variation proves that the presented experiment gains direct access to the contact resistance of the device. We can quantify that for an operating current density of 10mA/cm2 the investigated material system exhibits a voltage drop over the metal/organic interface of about 200mV, which can be reduced by more than one order of magnitude when employing an additional injection layer. The presented experiment proposes a simple strategy to measure the contact resistance between any metal and doped organic film without applying numerical tools or elaborate techniques. Furthermore, the simplistic device architecture allows for very high, homogeneous, and tunable electric fields within the organic layer, which enables a clear investigation of the Poole-Frenkel effect. △ Less

Submitted 30 April, 2022; originally announced May 2022.

Geophysical Evolution During Rocky Planet Formation

Authors: Tim Lichtenberg, Laura K. Schaefer, Miki Nakajima, Rebecca A. Fischer

Abstract: Progressive astronomical characterization of planet-forming disks and rocky exoplanets highlight the need for increasing interdisciplinary efforts to understand the birth and life cycle of terrestrial worlds in a unified picture. Here, we review major geophysical and geochemical processes that shape the evolution of rocky planets and their precursor planetesimals during planetary formation and ear… ▽ More Progressive astronomical characterization of planet-forming disks and rocky exoplanets highlight the need for increasing interdisciplinary efforts to understand the birth and life cycle of terrestrial worlds in a unified picture. Here, we review major geophysical and geochemical processes that shape the evolution of rocky planets and their precursor planetesimals during planetary formation and early evolution, and how these map onto the astrophysical timeline and varying accretion environments of planetary growth. The evolution of the coupled core-mantle-atmosphere system of growing protoplanets diverges in thermal, compositional, and structural states to first order, and ultimately shapes key planetary characteristics that can discern planets harboring clement surface conditions from those that do not. Astronomical campaigns seeking to investigate rocky exoplanets will require significant advances in laboratory characterization of planetary materials and time- and spatially-resolved theoretical models of planetary evolution, to extend planetary science beyond the Solar System and constrain the origins and frequency of habitable worlds like our own. △ Less

Submitted 18 March, 2022; originally announced March 2022.

Comments: 37 pages, 10 figures; under review for publication as a chapter in Protostars and Planets VII, University of Arizona Press; comments welcome; figures available at https://osf.io/rcjt7

Experimental observation of ABCB stacked tetralayer graphene

Authors: Konstantin G. Wirth, Jonas B. Profe, Alexander Rothstein, Hristiyana Kyoseva, Dario Siebenkotten, Lukas Conrads, Lennart Klebl, Ammon Fischer, Bernd Beschoten, Christoph Stampfer, Dante M. Kennes, Lutz Waldecker, Thomas Taubner

Abstract: In tetralayer graphene, three inequivalent layer stackings should exist, however, only rhombohedral (ABCA) and Bernal (ABAB) stacking have so far been observed. The three stacking sequences differ in their electronic structure, with the elusive third stacking (ABCB) being unique as it is predicted to exhibit an intrinsic bandgap as well as locally flat bands around the K points. Here, we use scatt… ▽ More In tetralayer graphene, three inequivalent layer stackings should exist, however, only rhombohedral (ABCA) and Bernal (ABAB) stacking have so far been observed. The three stacking sequences differ in their electronic structure, with the elusive third stacking (ABCB) being unique as it is predicted to exhibit an intrinsic bandgap as well as locally flat bands around the K points. Here, we use scattering-type scanning near-field optical microscopy and confocal Raman microscopy to identify and characterize domains of ABCB stacked tetralayer graphene. We differentiate between the three stacking sequences by addressing characteristic interband contributions in the optical conductivity between 0.28 and 0.56 eV with amplitude and phase-resolved near-field nano-spectroscopy. By normalizing adjacent flakes to each other, we achieve good agreement between theory and experiment, allowing for the unambiguous assignment of ABCB domains in tetralayer graphene. These results establish near-field spectroscopy at the interband transitions as a semi-quantitative tool, enabling the recognition of ABCB domains in tetralyer graphene flakes and therefore, providing a basis to study correlation physics of this exciting phase. △ Less

Submitted 15 September, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Journal ref: ACS Nano 2022, 16, 10, 16617-16623

Reducing the Dynamic State Index to its main information using Principal Component Analysis

Authors: Annette Müller, Nikolai Spaeth, Johanna Bollow, Iris Eder, Alina Fischer, Jana Frenzel, Annika Görnt, Kunyan Hao, Johanne Ilchmann, Isabel Kasner, Corinna Langwald, Steffen Laube, Flavio Maggioni, Beatrice Neiszt-Pllana, Daniel A. Redant, Lisa Rogge, Sus Sama, David Scheer, Inga Spreen, Patrick W. Varchmin, Vanessa R. Zabel, Wei Zhang, Anika Zibell

Abstract: The Dynamic State Index is a scalar quantity designed to identify atmospheric developments such as fronts, hurricanes or specific weather pattern. The DSI is defined as Jacobian-determinant of three constitutive quantities that characterize three-dimensional fluid flows: the Bernoulli stream function, the potential vorticity (PV) and the potential temperature. Here, we tackle the questions (i) if… ▽ More The Dynamic State Index is a scalar quantity designed to identify atmospheric developments such as fronts, hurricanes or specific weather pattern. The DSI is defined as Jacobian-determinant of three constitutive quantities that characterize three-dimensional fluid flows: the Bernoulli stream function, the potential vorticity (PV) and the potential temperature. Here, we tackle the questions (i) if the mathematical formulation of the DSI can be reduced, while keeping the main information, and (ii) does the reduction of the DSI depend on the spatial scale? Applying principle component analysis we find that three of six DSI terms that sum up to the Jacobi-determinant are sufficient for future DSI calculations. △ Less

Submitted 6 March, 2022; originally announced March 2022.

Single-Mode Emission in InP Microdisks on Si using Au Antenna

Authors: Preksha Tiwari, Anna Fischer, Markus Scherrer, Daniele Caimi, Heinz Schmid, Kirsten E. Moselund

Abstract: An important building block for on-chip photonic applications is a scaled emitter. Whispering gallery mode cavities based on III-Vs on Si allow for small device footprints and lasing with low thresholds. However, multimodal emission and wavelength stability over a wider range of temperature can be challenging. Here, we explore the use of Au nanorods on InP whispering gallery mode lasers on Si for… ▽ More An important building block for on-chip photonic applications is a scaled emitter. Whispering gallery mode cavities based on III-Vs on Si allow for small device footprints and lasing with low thresholds. However, multimodal emission and wavelength stability over a wider range of temperature can be challenging. Here, we explore the use of Au nanorods on InP whispering gallery mode lasers on Si for single mode emission. We show that by proper choice of the antenna size and positioning, we can suppress the side-modes of a cavity and achieve single mode emission over a wide excitation range. We establish emission trends by varying the size of the antenna and show that the far-field radiation pattern differs significantly for devices with and without antenna. Furthermore, the antenna-induced single mode emission is dominant from room temperature (300 K) down to 200 K, whereas the cavity without an antenna is multimodal and its dominant emission wavelength is highly temperature dependent. △ Less

Submitted 22 October, 2021; v1 submitted 21 October, 2021; originally announced October 2021.

Comments: 12 pages, 6 figures

The Complex Community Structure of the Bitcoin Address Correspondence Network

Authors: Jan Alexander Fischer, Andres Palechor, Daniele Dell'Aglio, Abraham Bernstein, Claudio J. Tessone

Abstract: Bitcoin is built on a blockchain, an immutable decentralised ledger that allows entities (users) to exchange Bitcoins in a pseudonymous manner. Bitcoins are associated with alpha-numeric addresses and are transferred via transactions. Each transaction is composed of a set of input addresses (associated with unspent outputs received from previous transactions) and a set of output addresses (to whic… ▽ More Bitcoin is built on a blockchain, an immutable decentralised ledger that allows entities (users) to exchange Bitcoins in a pseudonymous manner. Bitcoins are associated with alpha-numeric addresses and are transferred via transactions. Each transaction is composed of a set of input addresses (associated with unspent outputs received from previous transactions) and a set of output addresses (to which Bitcoins are transferred). Despite Bitcoin was designed with anonymity in mind, different heuristic approaches exist to detect which addresses in a specific transaction belong to the same entity. By applying these heuristics, we build an Address Correspondence Network: in this representation, addresses are nodes are connected with edges if at least one heuristic detects them as belonging to the same entity. %addresses are nodes and edges are drawn between addresses detected as belonging to the same entity by at least one heuristic. %nodes represent addresses and edges model the likelihood that two nodes belong to the same entity %In this network, connected components represent sets of addresses controlled by the same entity. In this paper, we analyse for the first time the Address Correspondence Network and show it is characterised by a complex topology, signalled by a broad, skewed degree distribution and a power-law component size distribution. Using a large-scale dataset of addresses for which the controlling entities are known, we show that a combination of external data coupled with standard community detection algorithms can reliably identify entities. The complex nature of the Address Correspondence Network reveals that usage patterns of individual entities create statistical regularities; and that these regularities can be leveraged to more accurately identify entities and gain a deeper understanding of the Bitcoin economy as a whole. △ Less

Submitted 19 May, 2021; originally announced May 2021.

Comments: 21 pages, 13 figures

Different Photostability of BiVO4 in Near-pH-Neutral Electrolytes

Authors: Siyuan Zhang, Ibbi Ahmet, Se-Ho Kim, Olga Kasian, Andrea M. Mingers, Patrick Schnell, Moritz Kolbach, Joohyun Lim, Anna Fischer, Karl J. J. Mayrhofer, Serhiy Cherevko, Baptiste Gault, Roel van de Krol, Christina Scheu

Abstract: Photoelectrochemical water splitting is a promising route to produce hydrogen from solar energy. However, corrosion of semiconducting photoelectrodes remains a fundamental challenge for their practical application. The stability of BiVO4, one of the best performing photoanode materials, is systematically examined here using an illuminated scanning flow cell to measure its dissolution operando. The… ▽ More Photoelectrochemical water splitting is a promising route to produce hydrogen from solar energy. However, corrosion of semiconducting photoelectrodes remains a fundamental challenge for their practical application. The stability of BiVO4, one of the best performing photoanode materials, is systematically examined here using an illuminated scanning flow cell to measure its dissolution operando. The dissolution rates of BiVO4 under illumination depend on the electrolyte and decrease in the order: borate (pH=9.3) > phosphate (pH=7.2) > citrate (pH=7.0). BiVO4 exhibits an inherent lack of stability during the oxygen evolution reaction (OER), while hole-scavenging citrate electrolyte offers kinetic protection. The dissolution of Bi peaks at different potentials than the dissolution of V in phosphate buffer, whereas both ions dissolve simultaneously in borate buffer. The life cycle of a 90 nm BiVO4 film is monitored during one hour of light-driven OER in borate buffer. The photocurrent and dissolution rates show independent trends with time, highlighting the importance to measure both quantities operando. Dissolution rates are correlated to the surface morphology and chemistry characterized using electron microscopy, X-ray photoelectron spectroscopy and atom probe tomography. These correlative measurements further the understanding on corrosion processes of photoelectrodes down to the nanoscopic scale to facilitate their future developments. △ Less

Submitted 10 February, 2021; originally announced February 2021.

NWChem: Past, Present, and Future

Authors: E. Aprà, E. J. Bylaska, W. A. de Jong, N. Govind, K. Kowalski, T. P. Straatsma, M. Valiev, H. J. J. van Dam, Y. Alexeev, J. Anchell, V. Anisimov, F. W. Aquino, R. Atta-Fynn, J. Autschbach, N. P. Bauman, J. C. Becca, D. E. Bernholdt, K. Bhaskaran-Nair, S. Bogatko, P. Borowski, J. Boschen, J. Brabec, A. Bruner, E. Cauët, Y. Chen , et al. (89 additional authors not shown)

Abstract: Specialized computational chemistry packages have permanently reshaped the landscape of chemical and materials science by providing tools to support and guide experimental efforts and for the prediction of atomistic and electronic properties. In this regard, electronic structure packages have played a special role by using first-principledriven methodologies to model complex chemical and materials… ▽ More Specialized computational chemistry packages have permanently reshaped the landscape of chemical and materials science by providing tools to support and guide experimental efforts and for the prediction of atomistic and electronic properties. In this regard, electronic structure packages have played a special role by using first-principledriven methodologies to model complex chemical and materials processes. Over the last few decades, the rapid development of computing technologies and the tremendous increase in computational power have offered a unique chance to study complex transformations using sophisticated and predictive many-body techniques that describe correlated behavior of electrons in molecular and condensed phase systems at different levels of theory. In enabling these simulations, novel parallel algorithms have been able to take advantage of computational resources to address the polynomial scaling of electronic structure methods. In this paper, we briefly review the NWChem computational chemistry suite, including its history, design principles, parallel tools, current capabilities, outreach and outlook. △ Less

Submitted 26 May, 2020; v1 submitted 24 April, 2020; originally announced April 2020.

Comments: This article appeared in volume 152, issue 18, page 184102 of the Journal of Chemical Physics. It can be found at https://doi.org/10.1063/5.0004997

Journal ref: J. Chem. Phys., 152, 184102 (2020)

Manufacture and Characterization of Graphene Membranes with Suspended Silicon Proof Masses for MEMS and NEMS Applications

Authors: Xuge Fan, Anderson D. Smith, Fredrik Forsberg, Stefan Wagner, Stephan Schröder, Sayedeh Shirin Afyouni Akbari, Andreas C. Fischer, Luis Guillermo Villanueva, Mikael Östling, Max C. Lemme, Frank Niklaus

Abstract: Unparalleled strength, chemical stability, ultimate surface-to-volume ratio and excellent electronic properties of graphene make it an ideal candidate as a material for membranes in micro- and nanoelectromechanical systems (MEMS and NEMS). However, the integration of graphene into MEMS or NEMS devices and suspended structures such as proof masses on graphene membranes raises several technological… ▽ More Unparalleled strength, chemical stability, ultimate surface-to-volume ratio and excellent electronic properties of graphene make it an ideal candidate as a material for membranes in micro- and nanoelectromechanical systems (MEMS and NEMS). However, the integration of graphene into MEMS or NEMS devices and suspended structures such as proof masses on graphene membranes raises several technological challenges, including collapse and rupture of the graphene. We have developed a robust route for realizing membranes made of double-layer CVD graphene and suspending large silicon proof masses on membranes with high yields. We have demonstrated the manufacture of square graphene membranes with side lengths from 7 micro meter to 110 micro meter and suspended proof masses consisting of solid silicon cubes that are from 5 micro meter multiply 5 micro meter multiply 16.4 micro meter to 100 micro meter multiply 100 micro meter multiply 16.4 micro meter in size. Our approach is compatible with wafer-scale MEMS and semiconductor manufacturing technologies, and the manufacturing yields of the graphene membranes with suspended proof masses were greater than 90%, with more than 70% of the graphene membranes having more than 90% graphene area without visible defects. The graphene membranes with suspended proof masses were extremely robust and were able to withstand indentation forces from an atomic force microscope (AFM) tip of up to ~7000 nN. The measured resonance frequencies of the realized structures ranged from tens to hundreds of kHz, with quality factors ranging from 63 to 148. The proposed approach for the reliable and large-scale manufacture of graphene membranes with suspended proof masses will enable the development and study of innovative NEMS devices with new functionalities and improved performances. △ Less

Submitted 16 March, 2020; originally announced March 2020.

Comments: 39 pages, 15 figures

Graphene ribbons with suspended masses as transducers in ultra-small nanoelectromechanical accelerometers

Authors: Xuge Fan, Fredrik Forsberg, Anderson D. Smith, Stephan Schröder, Stefan Wagner, Henrik Rödjegård, Andreas C. Fischer, Mikael Östling, Max C. Lemme, Frank Niklaus

Abstract: Nanoelectromechanical system (NEMS) sensors and actuators could be of use in the development of next generation mobile, wearable, and implantable devices. However, these NEMS devices require transducers that are ultra-small, sensitive and can be fabricated at low cost. Here, we show that suspended double-layer graphene ribbons with attached silicon proof masses can be used as combined spring-mass… ▽ More Nanoelectromechanical system (NEMS) sensors and actuators could be of use in the development of next generation mobile, wearable, and implantable devices. However, these NEMS devices require transducers that are ultra-small, sensitive and can be fabricated at low cost. Here, we show that suspended double-layer graphene ribbons with attached silicon proof masses can be used as combined spring-mass and piezoresistive transducers. The transducers, which are realized using processes that are compatible with large-scale semiconductor manufacturing technologies, can yield NEMS accelerometers that occupy at least two orders of magnitude smaller die area than conventional state-of-the-art silicon accelerometers. △ Less

Submitted 16 March, 2020; originally announced March 2020.

Comments: 42 pages, 4 figures

The 2019 Motile Active Matter Roadmap

Authors: Gerhard Gompper, Roland G. Winkler, Thomas Speck, Alexandre Solon, Cesare Nardini, Fernando Peruani, Hartmut Loewen, Ramin Golestanian, U. Benjamin Kaupp, Luis Alvarez, Thomas Kioerboe, Eric Lauga, Wilson Poon, Antonio De Simone, Frank Cichos, Alexander Fischer, Santiago Muinos Landin, Nicola Soeker, Raymond Kapral, Pierre Gaspard, Marisol Ripoll, Francesc Sagues, Julia Yeomans, Amin Doostmohammadi, Igor Aronson , et al. (12 additional authors not shown)

Abstract: Activity and autonomous motion are fundamental in living and engineering systems. This has stimulated the new field of active matter in recent years, which focuses on the physical aspects of propulsion mechanisms, and on motility-induced emergent collective behavior of a larger number of identical agents. The scale of agents ranges from nanomotors and microswimmers, to cells, fish, birds, and peop… ▽ More Activity and autonomous motion are fundamental in living and engineering systems. This has stimulated the new field of active matter in recent years, which focuses on the physical aspects of propulsion mechanisms, and on motility-induced emergent collective behavior of a larger number of identical agents. The scale of agents ranges from nanomotors and microswimmers, to cells, fish, birds, and people. Inspired by biological microswimmers, various designs of autonomous synthetic nano- and micromachines have been proposed. Such machines provide the basis for multifunctional, highly responsive, intelligent (artificial) active materials, which exhibit emergent behavior and the ability to perform tasks in response to external stimuli. A major challenge for understanding and designing active matter is their inherent nonequilibrium nature due to persistent energy consumption, which invalidates equilibrium concepts such as free energy, detailed balance, and time-reversal symmetry. Unraveling, predicting, and controlling the behavior of active matter is a truly interdisciplinary endeavor at the interface of biology, chemistry, ecology, engineering, mathematics, and physics. The vast complexity of phenomena and mechanisms involved in the self-organization and dynamics of motile active matter comprises a major challenge. Hence, to advance, and eventually reach a comprehensive understanding, this important research area requires a concerted, synergetic approach of the various disciplines. △ Less

Submitted 11 December, 2019; originally announced December 2019.

Journal ref: J. Phys.: Condens. Matter 32, 193001 (2020)

Vertical Organic Thin-Film Transistor with Anodized Permeable Base for Very Low Leakage Current

Authors: Felix Dollinger, Kyung-Geun Lim, Yang Li, Erjuan Guo, Peter Formánek, René Hübner, Axel Fischer, Hans Kleemann, Karl Leo

Abstract: The Organic Permeable Base Transistor (OPBT) is currently the fastest organic transistor with a transition frequency of 40 MHz. It relies on a thin aluminum base electrode to control the transistor current. This electrode is surrounded by a native oxide layer for passivation, currently created by oxidation in air. However, this process is not reliable and leads to large performance variations betw… ▽ More The Organic Permeable Base Transistor (OPBT) is currently the fastest organic transistor with a transition frequency of 40 MHz. It relies on a thin aluminum base electrode to control the transistor current. This electrode is surrounded by a native oxide layer for passivation, currently created by oxidation in air. However, this process is not reliable and leads to large performance variations between samples, slow production and relatively high leakage currents. Here, we demonstrate for the first time that electrochemical anodization can be conveniently employed for the fabrication of high performance OPBTs with vastly reduced leakage currents and more controlled process parameters. Very large transmission factors of 99.9996% are achieved, while excellent on/off ratios of 5x10$^5$ and high on-currents greater than 300 mA/cm$^2$ show that the C$_{60}$ semiconductor layer can withstand the electrochemical anodization. These results make anodization an intriguing option for innovative organic transistor design. △ Less

Submitted 29 March, 2019; v1 submitted 28 March, 2019; originally announced March 2019.

Comments: 3 Figures + 5 Figures in Supporting Information

Journal ref: Adv.Mater. 2019, 1900917

Gd(III)-Gd(III) RIDME for In-Cell EPR Distance Determination

Authors: Mykhailo Azarkh, Anna Bieber, Mian Qi, Jörg W. A. Fischer, Maxim Yulikov, Adelheid Godt, Malte Drescher

Abstract: In-cell distance determination by EPR reveals essential structural information about biomacromolecules under native conditions. We demonstrate that the pulsed EPR technique RIDME (relaxation induced dipolar modulation enhancement) can be utilized for such distance determination. The performance of in-cell RIDME has been assessed at Q band using stiff molecular rulers labelled with Gd(III)-PyMTA ta… ▽ More In-cell distance determination by EPR reveals essential structural information about biomacromolecules under native conditions. We demonstrate that the pulsed EPR technique RIDME (relaxation induced dipolar modulation enhancement) can be utilized for such distance determination. The performance of in-cell RIDME has been assessed at Q band using stiff molecular rulers labelled with Gd(III)-PyMTA tags and microinjected into X. laevis oocytes. The overtone coefficients are determined to be the same for protonated aqueous solutions and inside cells. As compared to in-cell DEER (double electron-electron resonance, also abbreviated as PELDOR), in-cell RIDME features approximately 5 times larger modulation depth and does not show artificial broadening in the distance distributions due to the effect of pseudo-secular terms. △ Less

Submitted 4 February, 2019; originally announced February 2019.

Comments: 15 pages, 3 figures

Integrated collinear refractive index sensor with Ge PIN photodiodes

Authors: Lion Augel, Yuma Kawaguchi, Stefan Bechler, Roman Körner, Jörg Schulze, Hironaga Uchida, Inga A. Fischer

Abstract: Refractive index sensing is a highly sensitive and label-free detection method for molecular binding events. Commercial implementations of biosensing concepts based on plasmon resonances typically require significant external instrumentation such as microscopes and spectrometers. Few concepts exist that are based on direct integration of plasmonic nanostructures with optoelectronic devices for on-… ▽ More Refractive index sensing is a highly sensitive and label-free detection method for molecular binding events. Commercial implementations of biosensing concepts based on plasmon resonances typically require significant external instrumentation such as microscopes and spectrometers. Few concepts exist that are based on direct integration of plasmonic nanostructures with optoelectronic devices for on-chip integration. Here, we present a CMOS-compatible refractive index sensor consisting of a Ge heterostructure PIN diode in combination with a plasmonic nanohole array structured directly into the diode Al contact metallization. In our devices, the photocurrent can be used to detect surface refractive index changes under simple top illumination and without the aid of signal amplification circuitry. Our devices exhibit large sensitivities > 1000 nm per refractive index unit in bulk refractive index sensing and could serve as prototypes to leverage the cost-effectiveness of the CMOS platform for ultra-compact, low-cost biosensors. △ Less

Submitted 4 February, 2019; originally announced February 2019.

Comments: 21 pages, 6 figures, supporting information with 11 pages and 11 figures attached

Journal ref: ACS Photonics 2018, 5, 11, 4586-4593

Optofluidic sensor system with Ge PIN photodetector for CMOS-compatible sensing

Authors: Lion Augel, Fritz Berkmann, Daniel Latta, Inga Anita Fischer, Stefan Bechler, Yasmine Elogail, Konrad Kostecki, Karin Potje-Kamloth, Jörg Schulze

Abstract: Vertical optofluidic biosensors based on refractive index sensing promise highest sensitivities at smallest area foot-print. Nevertheless, when it comes to large scale fabrication and application of such sensors, cheap and robust platforms for sample preparation and supply are needed - not to mention the expected ease of use in application. We present an optofluidic sensor system using a cyclic ol… ▽ More Vertical optofluidic biosensors based on refractive index sensing promise highest sensitivities at smallest area foot-print. Nevertheless, when it comes to large scale fabrication and application of such sensors, cheap and robust platforms for sample preparation and supply are needed - not to mention the expected ease of use in application. We present an optofluidic sensor system using a cyclic olefin copolymer microfluidic chip as carrier and feeding supply for a complementary metal-oxide-semiconductor-compatibly fabricated Ge PIN photodetector. Whereas typically only passive components of a sensor are located within the microfluidic channel, here the active device is directly exposed to the fluid, enabling top-illumination. The capability for detecting different refractive indices was verified by different fluids with subsequent recording of the optical responsivity. All components excel in their capability to be transferred to large scale fabrication and further integration of microfluidic and sensing systems. The photodetector itself is intended to serve as a platform for further sophisticated collinear sensing approaches. △ Less

Submitted 30 October, 2018; originally announced December 2018.

Comments: 9 pages, 3 figures

Journal ref: Microfluid Nanofluid (2017) 21:169

Dating glacier ice of the last millennium by quantum technology

Authors: Zhongyi Feng, Pascal Bohleber, Sven Ebser, Lisa Ringena, Maximilian Schmidt, Arne Kersting, Philip Hopkins, Helene Hoffmann, Andrea Fischer, Werner Aeschbach, Markus K. Oberthaler

Abstract: Radiometric dating with 39Ar covers a unique timespan and offers key advances in interpreting environmental archives of the last millennium. Although this tracer has been acknowledged for decades, studies so far have been limited by the low abundance and radioactivity, thus requiring huge sample sizes. Atom Trap Trace Analysis, an application of techniques from quantum physics such as laser coolin… ▽ More Radiometric dating with 39Ar covers a unique timespan and offers key advances in interpreting environmental archives of the last millennium. Although this tracer has been acknowledged for decades, studies so far have been limited by the low abundance and radioactivity, thus requiring huge sample sizes. Atom Trap Trace Analysis, an application of techniques from quantum physics such as laser cooling and trapping, allows to reduce the sample volume by several orders of magnitude, compared to conventional techniques. Here we show that the adaptation of this method to 39Ar is now available for glaciological applications, by demonstrating the first Argon Trap Trace Analysis (ArTTA) dating of alpine glacier ice samples. Ice blocks as small as a few kilograms are sufficient and have been obtained at two artificial glacier caves. Importantly, both sites offer direct access to the stratigraphy at the glacier base and validation against existing age constraints. The ice blocks obtained at Chli Titlis glacier in 3030 m all (Swiss Alps) have been dated by state-of-the-art micro-radiocarbon analysis in a previous study. The unique finding of a bark fragment and a larch needle within the ice of Schaufelferner glacier in 2870 m asl (Stubai Alps, Austria) allows for conventional radiocarbon dating. At both sites, results of 39Ar dating match the existing age information based on radiocarbon dating and visual stratigraphy. With our results, we establish Argon Trap Trace Analysis as the key to decipher so far untapped glacier archives of the last millennium. △ Less

Submitted 26 November, 2018; v1 submitted 9 November, 2018; originally announced November 2018.

Exact calculation of stimulated emission driven by pulsed light

Authors: Kevin A. Fischer

Abstract: Stimulated emission can be defined as the process when an incoming photon stimulates an additional quantum of energy from an atom into the same electromagnetic mode as the impinging photon. Hence, the two outgoing photons are identical. In a waveguide or free space, this intuition is typically found through Fermi's Golden rule, however, this does not properly account for the wave-like nature of th… ▽ More Stimulated emission can be defined as the process when an incoming photon stimulates an additional quantum of energy from an atom into the same electromagnetic mode as the impinging photon. Hence, the two outgoing photons are identical. In a waveguide or free space, this intuition is typically found through Fermi's Golden rule, however, this does not properly account for the wave-like nature of the photons. Here, I present an exact solution to stimulated emission from a quantum two-level atom that properly accounts for the incoming and outgoing electromagnetic modes. This result is valid over a huge range of incident photon numbers. For a single incident photon, it shows how the photon must properly mode match the two-level system to cause stimulated emission. For a Fock state drive with large photon number, the exact solution shows how a two-level system Rabi oscillates with the traveling Fock mode as it passes by. I additionally use the same formalism to show that stimulated emission by a coherent pulse cannot be understood as an additional photon being emitted into the incident coherent state because the two-level system's state factorizes with the electromagnetic field's coherent state. Recent advances in superconducting circuits make them an ideal platform to test these predictions. △ Less

Submitted 10 October, 2018; v1 submitted 13 June, 2018; originally announced June 2018.

Comments: 10 pages, 4 figures

Journal ref: OSA Continuum 1 (2), 772 (2018)

Diffusive exchange of trace elements between alkaline melts: implications for element fractionation and timescale estimations during magma mixing

Authors: Diego González-García, Maurizio Petrelli, Harald Behrens, Francesco Vetere, Lennart A. Fischer, Daniele Morgavi, Diego Perugini

Abstract: The diffusive exchange of 30 trace elements during the interaction of natural mafic and silicic alkaline melts was experimentally studied at conditions relevant to shallow magmatic systems. In detail, a set of 12 diffusion couple experiments have been performed between natural shoshonitic and rhyolitic melts from the Vulcano Island (Aeolian archipelago, Italy) at a temperature of 1200 °C, pressure… ▽ More The diffusive exchange of 30 trace elements during the interaction of natural mafic and silicic alkaline melts was experimentally studied at conditions relevant to shallow magmatic systems. In detail, a set of 12 diffusion couple experiments have been performed between natural shoshonitic and rhyolitic melts from the Vulcano Island (Aeolian archipelago, Italy) at a temperature of 1200 °C, pressures from 50 to 500 MPa, and water contents ranging from nominally dry to ca. 2 wt. %. Concentration-distance profiles, measured by Laser Ablation ICP-MS, highlight different behaviours, and trace elements were divided into two groups: (1) elements with normal diffusion profiles (13 elements, mainly low field strength and transition elements), and (2) elements showing uphill diffusion (17 elements including Y, Zr, Nb, Pb and rare earth elements, except Eu). For the elements showing normal diffusion profiles, chemical diffusion coefficients were estimated using a concentration-dependent evaluation method, and values are given at four intermediate compositions (SiO2 equal to 58, 62, 66 and 70 wt. %, respectively). A general coupling of diffusion coefficients to silica diffusivity is observed, and variations in systematics are observed between mafic and silicic compositions. Results show that water plays a decisive role on diffusive rates in the studied conditions, producing an enhancement between 0.4 and 0.7 log units per 1 wt.% of added H2O. Particularly notable is the behaviour of the trivalent-only REEs (La to Nd and Gd to Lu), with strong uphill diffusion minima, diminishing from light to heavy REEs. Modelling of REE profiles by a modified effective binary diffusion model indicates that activity gradients induced by the SiO2 concentration contrast are responsible for their development, inducing a transient partitioning of REEs towards the shoshonitic melt. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Comments: 57 pages, 12 figures, 5 tables

Journal ref: Geochimica et Cosmochimica Acta, 233, 95-114, 2018

Cavity-enhanced Raman emission from a single color center in a solid

Authors: Shuo Sun, Jingyuan Linda Zhang, Kevin A. Fischer, Michael J. Burek, Constantin Dory, Konstantinos G. Lagoudakis, Yan-Kai Tzeng, Marina Radulaski, Yousif Kelaita, Amir Safavi-Naeini, Zhi-Xun Shen, Nicholas A. Melosh, Steven Chu, Marko Loncar, Jelena Vuckovic

Abstract: We demonstrate cavity-enhanced Raman emission from a single atomic defect in a solid. Our platform is a single silicon-vacancy center in diamond coupled with a monolithic diamond photonic crystal cavity. The cavity enables an unprecedented frequency tuning range of the Raman emission (100 GHz) that significantly exceeds the spectral inhomogeneity of silicon-vacancy centers in diamond nanostructure… ▽ More We demonstrate cavity-enhanced Raman emission from a single atomic defect in a solid. Our platform is a single silicon-vacancy center in diamond coupled with a monolithic diamond photonic crystal cavity. The cavity enables an unprecedented frequency tuning range of the Raman emission (100 GHz) that significantly exceeds the spectral inhomogeneity of silicon-vacancy centers in diamond nanostructures. We also show that the cavity selectively suppresses the phonon-induced spontaneous emission that degrades the efficiency of Raman photon generation. Our results pave the way towards photon-mediated many-body interactions between solid-state quantum emitters in a nanophotonic platform. △ Less

Submitted 21 August, 2018; v1 submitted 17 April, 2018; originally announced April 2018.

Journal ref: Phys. Rev. Lett. 121, 083601 (2018)

Correlated Dynamics in Aqueous Proton Diffusion

Authors: Sean A. Fischer, Brett I. Dunlap, Daniel Gunlycke

Abstract: The aqueous proton displays an anomalously large diffusion coefficient that is up to 7 times that of similarly sized cations. There is general consensus that the proton achieves its high diffusion through the Grotthuss mechanism, whereby protons hop from one molecule to the next. A main assumption concerning the extraction of the timescale of the Grotthuss mechanism from experimental results has b… ▽ More The aqueous proton displays an anomalously large diffusion coefficient that is up to 7 times that of similarly sized cations. There is general consensus that the proton achieves its high diffusion through the Grotthuss mechanism, whereby protons hop from one molecule to the next. A main assumption concerning the extraction of the timescale of the Grotthuss mechanism from experimental results has been that, on average, there is an equal probability for the proton to hop to any of its neighboring water molecules. Herein, we present ab initio simulations that show this assumption is not generally valid. Specifically, we observe that there is an increased probability for the proton to revert back to its previous location. These correlations indicate that the interpretation of the experimental results need to be re-examined and suggest that the timescale of the Grotthuss mechanism is significantly shorter than was previously thought. △ Less

Submitted 13 March, 2018; originally announced March 2018.

Particle emission from open-quantum systems

Authors: Kevin A. Fischer, Rahul Trivedi, Daniil Lukin

Abstract: In this work, we discuss connections between different theoretical physics communities and their works, all related to systems that act as sources of particles such as photons, phonons, or electrons. Our interest is to understand how a low-dimensional quantum system driven by coherent fields, e.g. a two-level system, Jaynes-Cummings system, or photon pair source driven by a laser pulse, emits phot… ▽ More In this work, we discuss connections between different theoretical physics communities and their works, all related to systems that act as sources of particles such as photons, phonons, or electrons. Our interest is to understand how a low-dimensional quantum system driven by coherent fields, e.g. a two-level system, Jaynes-Cummings system, or photon pair source driven by a laser pulse, emits photons into a waveguide. Of particular relevance to solid-state sources is that we provide a way to include dissipation into the formalism for temporal-mode quantum optics. We will discuss the connections between temporal-mode quantum optics, scattering matrices, quantum stochastic calculus, continuous matrix product states and operators, and very traditional quantum optical concepts such as the Mandel photon counting formula and the Lindblad form of the quantum-optical master equation. We close with an example of how our formalism relates to single-photon sources with dephasing. △ Less

Submitted 24 August, 2018; v1 submitted 13 March, 2018; originally announced March 2018.

Journal ref: Phys. Rev. A 98, 023853 (2018)

Modal Noise Mitigation through Fiber Agitation for Fiber-fed Radial Velocity Spectrographs

Authors: Ryan R. Petersburg, Tyler M. McCracken, Dominic Eggerman, Colby A. Jurgenson, David Sawyer, Andrew E. Szymkowiak, Debra A. Fischer

Abstract: Optical fiber modal noise is a limiting factor for high precision spectroscopy signal-to-noise in the near-infrared and visible. Unabated, especially when using highly coherent light sources for wavelength calibration, modal noise can induce radial velocity (RV) errors that hinder the discovery of low-mass (and potentially Earth-like) planets. Previous research in this field has found sufficient m… ▽ More Optical fiber modal noise is a limiting factor for high precision spectroscopy signal-to-noise in the near-infrared and visible. Unabated, especially when using highly coherent light sources for wavelength calibration, modal noise can induce radial velocity (RV) errors that hinder the discovery of low-mass (and potentially Earth-like) planets. Previous research in this field has found sufficient modal noise mitigation through the use of an integrating sphere, but this requires extremely bright light sources, a luxury not necessarily afforded by the next generation of high-resolution optical spectrographs. Otherwise, mechanical agitation, which "mixes" the fiber's modal patterns and allows the noise to be averaged over minutes-long exposures, provides some noise reduction but the exact mechanism behind improvement in signal-to-noise and RV drift has not been fully explored or optimized by the community. Therefore, we have filled out the parameter space of modal noise agitation techniques in order to better understand agitation's contribution to mitigating modal noise and to discover a better method for agitating fibers. We find that modal noise is best suppressed by the quasi-chaotic motion of two high-amplitude agitators oscillating with varying phase for fibers with large core diameters and low azimuthal symmetry. This work has subsequently influenced the design of a fiber agitator, to be installed with the EXtreme PREcision Spectrograph, that we estimate will reduce modal-noise-induced RV error to less than 3.2 cm/s. △ Less

Submitted 5 February, 2018; originally announced February 2018.

Comments: Accepted by The Astrophysical Journal

Quantum dot single photon sources with ultra-low multi-photon probability

Authors: Lukas Hanschke, Kevin A. Fischer, Stefan Appel, Daniil Lukin, Jakob Wierzbowski, Shuo Sun, Rahul Trivedi, Jelena Vučković, Jonathan J. Finley, Kai Müller

Abstract: High-quality sources of single photons are of paramount importance for quantum communication, sensing and metrology. To these ends, resonantly excited two-level systems based on self-assembled quantum dots have recently generated widespread interest. Nevertheless, we have recently shown that for resonantly excited two-level systems, emission of a photon during the presence of the excitation laser… ▽ More High-quality sources of single photons are of paramount importance for quantum communication, sensing and metrology. To these ends, resonantly excited two-level systems based on self-assembled quantum dots have recently generated widespread interest. Nevertheless, we have recently shown that for resonantly excited two-level systems, emission of a photon during the presence of the excitation laser pulse and subsequent re-excitation results in a degradation of the obtainable single-photon purity. Here, we demonstrate that generating single photons from self-assembled quantum dots with a scheme based on two-photon excitation of the biexciton strongly suppresses the re-excitation. Specifically, the pulse-length dependence of the multi-photon error rate reveals a quadratic dependence in contrast to the linear dependence of resonantly excited two-level systems, improving the obtainable multi-photon error rate by several orders of magnitude for short pulses. We support our experiments with a new theoretical framework and simulation methodology to understand few-photon sources. △ Less

Submitted 28 September, 2018; v1 submitted 5 January, 2018; originally announced January 2018.

Comments: We have included a Jupyter notebook as Supplemental Material which outlines how to perform the calculations in this paper using the Quantum Optics Toolbox in Python (QuTiP)

Journal ref: npj Quantum Information 4, 43 (2018)

Scattering into one-dimensional waveguides from a coherently-driven quantum-optical system

Authors: Kevin A. Fischer, Rahul Trivedi, Vinay Ramasesh, Irfan Siddiqi, Jelena Vučković

Abstract: We develop a new computational tool and framework for characterizing the scattering of photons by energy-nonconserving Hamiltonians into unidirectional (chiral) waveguides, for example, with coherent pulsed excitation. The temporal waveguide modes are a natural basis for characterizing scattering in quantum optics, and afford a powerful technique based on a coarse discretization of time. This over… ▽ More We develop a new computational tool and framework for characterizing the scattering of photons by energy-nonconserving Hamiltonians into unidirectional (chiral) waveguides, for example, with coherent pulsed excitation. The temporal waveguide modes are a natural basis for characterizing scattering in quantum optics, and afford a powerful technique based on a coarse discretization of time. This overcomes limitations imposed by singularities in the waveguide-system coupling. Moreover, the integrated discretized equations can be faithfully converted to a continuous-time result by taking the appropriate limit. This approach provides a complete solution to the scattered photon field in the waveguide, and can also be used to track system-waveguide entanglement during evolution. We further develop a direct connection between quantum measurement theory and evolution of the scattered field, demonstrating the correspondence between quantum trajectories and the scattered photon state. Our method is most applicable when the number of photons scattered is known to be small, i.e. for a single-photon or photon-pair source. We illustrate two examples: analytical solutions for short laser pulses scattering off a two-level system and numerically exact solutions for short laser pulses scattering off a spontaneous parametric downconversion (SPDC) or spontaneous four-wave mixing (SFWM) source. Finally, we note that our technique can easily be extended to systems with multiple ground states and generalized scattering problems with both finite photon number input and coherent state drive, potentially enhancing the understanding of, e.g., light-matter entanglement and photon phase gates. △ Less

Submitted 19 May, 2018; v1 submitted 8 October, 2017; originally announced October 2017.

Comments: Numerical package in collaboration with Ben Bartlett (Stanford University), implemented in QuTiP: The Quantum Toolbox in Python, Quantum 2018

Journal ref: Quantum 2, 69 (2018)

Signatures of two-photon pulses from a quantum two-level system

Authors: Kevin A. Fischer, Lukas Hanschke, Jakob Wierzbowski, Tobias Simmet, Constantin Dory, Jonathan J. Finley, Jelena Vučković, Kai Müller

Abstract: The theoretical community has found interest in the ability of a two-level atom to generate a strong many-body interaction with light under pulsed excitation. Single-photon generation is the most well-known effect, where a short Gaussian laser pulse is converted into a Lorentzian single-photon wavepacket. However, recent proposals have surprisingly suggested that scattering with intense laser fiel… ▽ More The theoretical community has found interest in the ability of a two-level atom to generate a strong many-body interaction with light under pulsed excitation. Single-photon generation is the most well-known effect, where a short Gaussian laser pulse is converted into a Lorentzian single-photon wavepacket. However, recent proposals have surprisingly suggested that scattering with intense laser fields off a two-level atom may generate oscillations in two-photon emission that are out of phase with its Rabi oscillations, as the power of the pulse increases. Here, we provide an intuitive explanation for these oscillations using a quantum trajectory approach and show how they may preferentially result in emission of two-photon pulses. Experimentally, we observe signatures of these oscillations by measuring the bunching of photon pulses scattered off a two-level quantum system. Our theory and measurements provide crucial insight into the re-excitation process that plagues on-demand single-photon sources while suggesting the production of novel multi-photon states. △ Less

Submitted 4 September, 2017; originally announced September 2017.

Journal ref: Nature Physics 13, 649-654 (2017)

Pulsed Rabi oscillations in quantum two-level systems: beyond the Area Theorem

Authors: Kevin A. Fischer, Lukas Hanschke, Malte Kremser, Jonathan J. Finley, Kai Müller, Jelena Vučković

Abstract: The Area Theorem states that when a short optical pulse drives a quantum two-level system, it undergoes Rabi oscillations in the probability of scattering a single photon. In this work, we investigate the breakdown of the Area Theorem as both the pulse length becomes non-negligible and for certain pulse areas. Using simple quantum trajectories, we provide an analytic approximation to the photon em… ▽ More The Area Theorem states that when a short optical pulse drives a quantum two-level system, it undergoes Rabi oscillations in the probability of scattering a single photon. In this work, we investigate the breakdown of the Area Theorem as both the pulse length becomes non-negligible and for certain pulse areas. Using simple quantum trajectories, we provide an analytic approximation to the photon emission dynamics of a two-level system. Our model provides an intuitive way to understand re-excitation, which elucidates the mechanism behind the two-photon emission events that can spoil single-photon emission. We experimentally measure the emission statistics from a semiconductor quantum dot, acting as a two-level system, and show good agreement with our simple model for short pulses. Additionally, the model clearly explains our recent results [K. Fischer and L. Hanschke, et al., Nature Physics (2017)] showing dominant two-photon emission from a two-level system for pulses with interaction areas equal to an even multiple of $π$. △ Less

Submitted 2 November, 2017; v1 submitted 17 August, 2017; originally announced August 2017.

Journal ref: Quantum Sci. Technol. 3, 014006 (2018)

Exponential Decay Of Concentration Variance During Magma Mixing: Robustness Of A Volcanic Chronometer And Implications For The Homogenization Of Chemical Heterogeneities In Magmatic Systems

Authors: Stefano Rossi, Maurizio Petrelli, Daniele Morgavi, Diego González-García, Lennart A. Fischer, Francesco Vetere, Diego Perugini

Abstract: The mixing of magmas is a fundamental process in the Earth system causing extreme compositional variations in igneous rocks. This process can develop with different intensities both in space and time, making the interpretation of compositional patterns in igneous rocks a petrological challenge. As a time-dependent process, magma mixing has been suggested to preserve information about the time elap… ▽ More The mixing of magmas is a fundamental process in the Earth system causing extreme compositional variations in igneous rocks. This process can develop with different intensities both in space and time, making the interpretation of compositional patterns in igneous rocks a petrological challenge. As a time-dependent process, magma mixing has been suggested to preserve information about the time elapsed between the injection of a new magma into sub-volcanic magma chambers and eruptions. This allowed the use of magma mixing as an additional volcanological tool to infer the mixing-to-eruption timescales. In spite of the potential of magma mixing processes to provide information about the timing of volcanic eruptions its statistical robustness is not yet established. This represents a prerequisite to apply reliably this conceptual model. Here, new chaotic magma mixing experiments were performed at different times using natural melts. The degree of reproducibility of experimental results was tested repeating one experiment at the same starting conditions and comparing the compositional variability. We further tested the robustness of the statistical analysis by randomly removing from the analysed dataset a progressively increasing number of samples. Results highlight the robustness of the method to derive empirical relationships linking the efficiency of chemical exchanges and mixing time. These empirical relationships remain valid by removing up to 80% of the analytical determinations. Experimental results were applied to constrain the homogenization time of chemical heterogeneities in natural magmatic system during mixing. The calculations show that, when the mixing dynamics generate millimetre thick filaments, homogenization timescales of the order of a few minutes are to be expected. △ Less

Submitted 30 June, 2017; originally announced June 2017.

Observation and Control of Laser-Enabled Auger Decay

Authors: D. Iablonskyi, K. Ueda, Kenichi L. Ishikawa, A. S. Kheifets, P. Carpeggiani, M. Reduzzi, H. Ahmadi, A. Comby, G. Sansone, T. Csizmadia, S. Kuehn, E. Ovcharenko, T. Mazza, M. Meyer, A. Fischer, C. Callegari, O. Plekan, P. Finetti, E. Allaria, E. Ferrari, E. Roussel, D. Gauthier, L. Giannessi, K. C. Prince

Abstract: Single photon laser enabled Auger decay (spLEAD) has been redicted theoretically [Phys. Rev. Lett. 111, 083004 (2013)] and here we report its first experimental observation in neon. Using coherent, bichromatic free-electron laser pulses, we have detected the process and coherently controlled the angular distribution of the emitted electrons by varying the phase difference between the two laser fie… ▽ More Single photon laser enabled Auger decay (spLEAD) has been redicted theoretically [Phys. Rev. Lett. 111, 083004 (2013)] and here we report its first experimental observation in neon. Using coherent, bichromatic free-electron laser pulses, we have detected the process and coherently controlled the angular distribution of the emitted electrons by varying the phase difference between the two laser fields. Since spLEAD is highly sensitive to electron correlation, this is a promising method for probing both correlation and ultrafast hole migration in more complex systems. △ Less

Submitted 4 May, 2017; originally announced May 2017.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 119, 073203 (2017)

Coherent control with a short-wavelength Free Electron Laser

Authors: K. C. Prince, E. Allaria, C. Callegari, R. Cucini, G. De Ninno, S. Di Mitri, B. Diviacco, E. Ferrari, P. Finetti, D. Gauthier, L. Giannessi, N. Mahne, G. Penco, O. Plekan, L. Raimondi, P. Rebernik, E. Roussel, C. Svetina, M. Trovò, M. Zangrando, M. Negro, P. Carpeggiani, M. Reduzzi, G. Sansone, A. N. Grum-Grzhimailo , et al. (15 additional authors not shown)

Abstract: XUV and X-ray Free Electron Lasers (FELs) produce short wavelength pulses with high intensity, ultrashort duration, well-defined polarization and transverse coherence, and have been utilised for many experiments previously possible at long wavelengths only: multiphoton ionization, pumping an atomic laser, and four-wave mixing spectroscopy. However one important optical technique, coherent control,… ▽ More XUV and X-ray Free Electron Lasers (FELs) produce short wavelength pulses with high intensity, ultrashort duration, well-defined polarization and transverse coherence, and have been utilised for many experiments previously possible at long wavelengths only: multiphoton ionization, pumping an atomic laser, and four-wave mixing spectroscopy. However one important optical technique, coherent control, has not yet been demonstrated, because Self- Amplified Spontaneous Emission FELs have limited longitudinal coherence. Single-colour pulses from the FERMI seeded FEL are longitudinally coherent, and two-colour emission is predicted to be coherent. Here we demonstrate the phase correlation of two colours, and manipulate it to control an experiment. Light of wavelengths 63.0 and 31.5 nm ionized neon, and the asymmetry of the photoelectron angular distribution was controlled by adjusting the phase, with temporal resolution 3 attoseconds. This opens the door to new shortwavelength coherent control experiments with ultrahigh time resolution and chemical sensitivity. △ Less

Submitted 12 January, 2017; originally announced January 2017.

Journal ref: Nature Photonics 10, 176-179 (2016)

Photon Blockade in Two-Emitter-Cavity Systems

Authors: Marina Radulaski, Kevin A. Fischer, Konstantinos G. Lagoudakis, Jingyuan Linda Zhang, Jelena Vuckovic

Abstract: The photon blockade (PB) effect in emitter-cavity systems depends on the anharmonicity of the ladder of dressed energy eigenstates. The recent developments in color center photonics are leading toward experimental demonstrations of multi-emitter-cavity solid-state systems with an expanded set of energy levels compared to the traditionally studied single-emitter systems. We focus on the case of N =… ▽ More The photon blockade (PB) effect in emitter-cavity systems depends on the anharmonicity of the ladder of dressed energy eigenstates. The recent developments in color center photonics are leading toward experimental demonstrations of multi-emitter-cavity solid-state systems with an expanded set of energy levels compared to the traditionally studied single-emitter systems. We focus on the case of N = 2 nonidentical quasi-atoms strongly coupled to a nanocavity in the bad cavity regime (with parameters within reach of the color center systems), and discover three PB mechanisms: polaritonic, subradiant and unconventional. The polaritonic PB, which is the conventional mechanism studied in single-emitter-cavity systems, also occurs at the polariton frequencies in multi-emitter systems. The subradiant PB is a new interference effect owing to the inhomogeneous broadening of the emitters which results in a purer and a more robust single photon emission than the polaritonic PB. The unconventional PB in the modeled system corresponds to the suppression of the single- and two-photon correlation statistics and the enhancement of the three-photon correlation statistic. Using the effective Hamiltonian approach, we unravel the origin and the time-domain evolution of these phenomena. △ Less

Submitted 4 June, 2017; v1 submitted 10 December, 2016; originally announced December 2016.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. A 96, 011801 (2017)

An on-chip architecture for self-homodyned nonclassical light

Authors: Kevin A. Fischer, Yousif A. Kelaita, Neil V. Sapra, Constantin Dory, Konstantinos G. Lagoudakis, Kai Müller, Jelena Vučković

Abstract: In the last decade, there has been remarkable progress on the practical integration of on-chip quantum photonic devices yet quantum state generators remain an outstanding challenge. Simultaneously, the quantum-dot photonic-crystal-resonator platform has demonstrated a versatility for creating nonclassical light with tunable quantum statistics, thanks to a newly discovered self-homodyning interfero… ▽ More In the last decade, there has been remarkable progress on the practical integration of on-chip quantum photonic devices yet quantum state generators remain an outstanding challenge. Simultaneously, the quantum-dot photonic-crystal-resonator platform has demonstrated a versatility for creating nonclassical light with tunable quantum statistics, thanks to a newly discovered self-homodyning interferometric effect that preferentially selects the quantum light over the classical light when using an optimally tuned Fano resonance. In this work, we propose a general structure for the cavity quantum electrodynamical generation of quantum states from a waveguide-integrated version of the quantum-dot photonic-crystal-resonator platform, which is specifically tailored for preferential quantum state transmission. We support our results with rigorous Finite-Difference Time-Domain and quantum optical simulations, and show how our proposed device can serve as a robust generator of highly pure single- and even multi-photon states. △ Less

Submitted 26 April, 2017; v1 submitted 4 November, 2016; originally announced November 2016.

Comments: We have included a runnable Jupyter notebook to the arXiv submission that contains all the information necessary to reproduce our quantum optical simulations

Journal ref: Phys. Rev. Applied 7, 044002 (2017)

Nanodiamond integration with photonic devices

Authors: Marina Radulaski, Jingyuan Linda Zhang, Yan-Kai Tzeng, Konstantinos G. Lagoudakis, Hitoshi Ishiwata, Constantin Dory, Kevin A. Fischer, Yousif A. Kelaita, Shuo Sun, Peter C. Maurer, Kassem Alassaad, Gabriel Ferro, Zhi-Xun Shen, Nicholas Melosh, Steven Chu, Jelena Vučković

Abstract: We discuss the progress in integration of nanodiamonds with photonic devices for quantum optics applications. Experimental results in GaP, SiO2 and SiC-nanodiamond platforms show that various regimes of light and matter interaction can be achieved by engineering color center systems through hybrid approaches. We present our recent results on the growth of color center-rich nanodiamond on prefabric… ▽ More We discuss the progress in integration of nanodiamonds with photonic devices for quantum optics applications. Experimental results in GaP, SiO2 and SiC-nanodiamond platforms show that various regimes of light and matter interaction can be achieved by engineering color center systems through hybrid approaches. We present our recent results on the growth of color center-rich nanodiamond on prefabricated 3C-SiC microdisk resonators. These hybrid devices achieve up to five-fold enhancement of diamond color center light emission and can be employed for integrated quantum photonics. △ Less

Submitted 6 March, 2019; v1 submitted 11 October, 2016; originally announced October 2016.

Comments: 14 pages, 10 figures

Tuning the Photon Statistics of a Strongly Coupled Nanophotonic System

Authors: Constantin Dory, Kevin A. Fischer, Kai Müller, Konstantinos G. Lagoudakis, Tomas Sarmiento, Armand Rundquist, Jingyuan L. Zhang, Yousif Kelaita, Neil V. Sapra, Jelena Vučković

Abstract: We investigate the dynamics of single- and multi-photon emission from detuned strongly coupled systems based on the quantum-dot-photonic-crystal resonator platform. Transmitting light through such systems can generate a range of non-classical states of light with tunable photon counting statistics due to the nonlinear ladder of hybridized light-matter states. By controlling the detuning between em… ▽ More We investigate the dynamics of single- and multi-photon emission from detuned strongly coupled systems based on the quantum-dot-photonic-crystal resonator platform. Transmitting light through such systems can generate a range of non-classical states of light with tunable photon counting statistics due to the nonlinear ladder of hybridized light-matter states. By controlling the detuning between emitter and resonator, the transmission can be tuned to strongly enhance either single- or two-photon emission processes. Despite the strongly-dissipative nature of these systems, we find that by utilizing a self-homodyne interference technique combined with frequency-filtering we are able to find a strong two-photon component of the emission in the multi-photon regime. In order to explain our correlation measurements, we propose rate equation models that capture the dominant processes of emission both in the single- and multi-photon regimes. These models are then supported by quantum-optical simulations that fully capture the frequency filtering of emission from our solid-state system. △ Less

Submitted 21 March, 2017; v1 submitted 1 October, 2016; originally announced October 2016.

Journal ref: Phys. Rev. A 95, 023804 (2017)

Dynamical modeling of pulsed two-photon interference

Authors: Kevin A. Fischer, Kai Müller, Konstantinos G. Lagoudakis, Jelena Vučković

Abstract: Single-photon sources are at the heart of quantum-optical networks, with their uniquely quantum emission and phenomenon of two-photon interference allowing for the generation and transfer of nonclassical states. Although a few analytical methods have been briefly investigated for describing pulsed single-photon sources, these methods apply only to either perfectly ideal or at least extremely ideal… ▽ More Single-photon sources are at the heart of quantum-optical networks, with their uniquely quantum emission and phenomenon of two-photon interference allowing for the generation and transfer of nonclassical states. Although a few analytical methods have been briefly investigated for describing pulsed single-photon sources, these methods apply only to either perfectly ideal or at least extremely idealized sources. Here, we present the first complete picture of pulsed single-photon sources by elaborating how to numerically and fully characterize non-ideal single-photon sources operating in a pulsed regime. In order to achieve this result, we make the connection between quantum Monte--Carlo simulations, experimental characterizations, and an extended form of the quantum regression theorem. We elaborate on how an ideal pulsed single-photon source is connected to its photocount distribution and its measured degree of second- and first-order optical coherence. By doing so, we provide a description of the relationship between instantaneous source correlations and the typical experimental interferometers (Hanbury-Brown and Twiss, Hong-Ou-Mandel, and Mach-Zehnder) used to characterize such sources. Then, we use these techniques to explore several prototypical quantum systems and their non-ideal behaviors. As an example numerical result, we show that for the most popular single-photon source---a resonantly excited two-level system---its error probability is directly related to its excitation pulse length. We believe that the intuition gained from these representative systems and characters can be used to interpret future results with more complicated source Hamiltonians and behaviors. Finally, we have thoroughly documented our simulation methods with contributions to the Quantum Optics Toolbox in Python (QuTiP) in order to make our work easily accessible to other scientists and engineers. △ Less

Submitted 6 February, 2018; v1 submitted 26 August, 2016; originally announced August 2016.

Journal ref: New J. Phys. 18 113053 (2016)

Complete Coherent Control of a Quantum Dot Strongly Coupled to a Nanocavity

Authors: Constantin Dory, Kevin A. Fischer, Kai Müller, Konstantinos G. Lagoudakis, Tomas Sarmiento, Armand Rundquist, Jingyuan L. Zhang, Yousif Kelaita, Jelena Vuckovic

Abstract: Strongly coupled quantum dot-cavity systems provide a non-linear configuration of hybridized light-matter states with promising quantum-optical applications. Here, we investigate the coherent interaction between strong laser pulses and quantum dot-cavity polaritons. Resonant excitation of polaritonic states and their interaction with phonons allow us to observe coherent Rabi oscillations and Ramse… ▽ More Strongly coupled quantum dot-cavity systems provide a non-linear configuration of hybridized light-matter states with promising quantum-optical applications. Here, we investigate the coherent interaction between strong laser pulses and quantum dot-cavity polaritons. Resonant excitation of polaritonic states and their interaction with phonons allow us to observe coherent Rabi oscillations and Ramsey fringes. Furthermore, we demonstrate complete coherent control of a quantum dot-photonic crystal cavity based quantum-bit. By controlling the excitation power and phase in a two-pulse excitation scheme we achieve access to the full Bloch sphere. Quantum-optical simulations are in good agreement with our experiments and provide insight into the decoherence mechanisms. △ Less

Submitted 11 April, 2016; v1 submitted 18 December, 2015; originally announced December 2015.

Journal ref: Scientific Reports 6, 25172 (2016)

Self-homodyne enabled generation of indistinguishable photons

Authors: Kai Müller, Kevin A. Fischer, Constantin Dory, Tomas Sarmiento, Konstantinos G. Lagoudakis, Armand Rundquist, Yousif A. Kelaita, Jelena Vučković

Abstract: The rapid generation of non-classical light serves as the foundation for exploring quantum optics and developing applications such as secure communication or generation of NOON-states. While strongly coupled quantum dot-photonic crystal resonator systems have great potential as non-classical light sources due to their promise of tailored output statistics, the generation of indistinguishable photo… ▽ More The rapid generation of non-classical light serves as the foundation for exploring quantum optics and developing applications such as secure communication or generation of NOON-states. While strongly coupled quantum dot-photonic crystal resonator systems have great potential as non-classical light sources due to their promise of tailored output statistics, the generation of indistinguishable photons has been obscured due to the strongly dissipative nature of such systems. Here, we demonstrate that the recently discovered self-homodyne suppression technique can be used to overcome this limitation and tune the quantum statistics of transmitted light, achieving indistinguishable photon emission competitive with state-of-the-art metrics. Furthermore, our nanocavity-based platform directly lends itself to scalable on-chip architectures for quantum information. △ Less

Submitted 20 September, 2016; v1 submitted 17 December, 2015; originally announced December 2015.

Journal ref: Optica Vol. 3, Issue 9, pp. 931-936 (2016)

Self-homodyne measurement of a dynamic Mollow triplet in the solid state

Authors: Kevin A. Fischer, Kai Müller, Armand Rundquist, Tomas Sarmiento, Alexander Y. Piggott, Yousif Kelaita, Constantin Dory, Konstantinos G. Lagoudakis, Jelena Vučković

Abstract: The study of light-matter interaction at the quantum scale has been enabled by the cavity quantum electrodynamics (CQED) architecture, in which a quantum two-level system strongly couples to a single cavity mode. Originally implemented with atoms in optical cavities, CQED effects are now also observed with artificial atoms in solid-state environments. Such realizations of these systems exhibit fas… ▽ More The study of light-matter interaction at the quantum scale has been enabled by the cavity quantum electrodynamics (CQED) architecture, in which a quantum two-level system strongly couples to a single cavity mode. Originally implemented with atoms in optical cavities, CQED effects are now also observed with artificial atoms in solid-state environments. Such realizations of these systems exhibit fast dynamics, which makes them attractive candidates for devices including modulators and sources in high-throughput communications. However, these systems possess large photon out-coupling rates that obscure any quantum behavior at large excitation powers. Here, we have utilised a self-homodyning interferometric technique that fully employs the complex mode structure of our nanofabricated cavity to observe a quantum phenomenon known as the dynamic Mollow triplet. We expect this interference to facilitate the development of arbitrary on-chip quantum state generators, thereby strongly influencing quantum lithography, metrology, and imaging. △ Less

Submitted 22 August, 2016; v1 submitted 13 December, 2015; originally announced December 2015.

Journal ref: Nature Photonics 10 (2016) 163-166

Protein structure prediction guided by cross-linking restraints - A systematic evaluation of the impact of the cross-linking spacer length

Authors: Tommy Hofmann, Axel W. Fischer, Jens Meiler, Stefan Kalkhof

Abstract: Recent development of high-resolution mass spectrometry (MS) instruments enables chemical cross-linking (XL) to become a high-throughput method for obtaining structural information about proteins. Restraints derived from XL-MS experiments have been used successfully for structure refinement and protein-protein docking. However, one formidable question is under which circumstances XL-MS data might… ▽ More Recent development of high-resolution mass spectrometry (MS) instruments enables chemical cross-linking (XL) to become a high-throughput method for obtaining structural information about proteins. Restraints derived from XL-MS experiments have been used successfully for structure refinement and protein-protein docking. However, one formidable question is under which circumstances XL-MS data might be sufficient to determine a protein's tertiary structure de novo? Answering this question will not only include understanding the impact of XL-MS data on sampling and scoring within a de novo protein structure prediction algorithm, it must also determine an optimal cross-linker type and length for protein structure determination. While a longer cross-linker will yield more restraints, the value of each restraint for protein structure prediction decreases as the restraint is consistent with a larger conformational space. In this study, the number of cross-links and their discriminative power was systematically analyzed in silico on a set of 2,055 non-redundant protein folds considering Lys-Lys, Lys-Asp, Lys-Glu, Cys-Cys, and Arg-Arg reactive cross-linkers between 1 Å and 60 Å. Depending on the protein size a heuristic was developed that determines the optimal cross-linker length. Next, simulated restraints of variable length were used to de novo predict the tertiary structure of fifteen proteins using the BCL::Fold algorithm. The results demonstrate that a distinct cross-linker length exists for which information content for de novo protein structure prediction is maximized. The sampling accuracy improves on average by 1.0 Å and up to 2.2 Å in the most prominent example. XL-MS restraints enable consistently an improved selection of native-like models with an average enrichment of 2.1. △ Less

Submitted 20 March, 2016; v1 submitted 30 May, 2015; originally announced June 2015.

Comments: 21 pages, 8 figures, 3 tables

Fowler-Nordheim Plot Analysis: a Progress Report

Authors: Richard G. Forbes, Jonathan H. B. Deane, Andreas Fischer, Marwan S. Mousa

Abstract: The commonest method of characterizing a cold field electron emitter is to measure its current-voltage characteristics, and the commonest method of analysing these characteristics is by means of a Fowler-Nordheim (FN) plot. This tutorial/review-type paper outlines a more systematic method of setting out the Fowler-Nordheim-type theory of cold field electron emission, and brings together and summar… ▽ More The commonest method of characterizing a cold field electron emitter is to measure its current-voltage characteristics, and the commonest method of analysing these characteristics is by means of a Fowler-Nordheim (FN) plot. This tutorial/review-type paper outlines a more systematic method of setting out the Fowler-Nordheim-type theory of cold field electron emission, and brings together and summarises the current state of work by the authors on developing the theory and methodology of FN plot analysis. This has turned out to be far more complicated than originally expected. Emphasis is placed in this paper on: (a) the interpretation of FN-plot slopes, which is currently both easier and of more experimental interest than the analysis of FN-plot intercepts; and (b) preliminary explorations into developing methodology for interpreting current-voltage characteristics when there is series resistance in the conduction path from the high-voltage generator to the emitter's emitting regions. This work reinforces our view that FN-plot analysis is best carried out on the raw measured current-voltage data, without pre-conversion into another data format, particularly if series resistance is present in the measuring circuit. Relevant formulae are given for extracting field-enhancement-factor values from such an analysis. △ Less

Submitted 1 July, 2016; v1 submitted 23 April, 2015; originally announced April 2015.

Comments: v7 is publication version, but with correction of typographic errors on pages 138 and 141 of published version

Journal ref: Jordan Journal of Physics 8 (2015) 125-147

BCL::MP-Fold: membrane protein structure prediction guided by EPR restraints

Authors: Axel Walter Fischer, Nathan Scott Alexander, Nils Woetzel, Mert Karakas, Brian Weiner, Jens Meiler

Abstract: For many membrane proteins the determination of their topology remains a challenge for methods like X-ray crystallography and nuclear magnetic resonance (NMR) spectroscopy. Electron paramagnetic resonance (EPR) spectroscopy has evolved as an alternative technique to study structure and dynamics of membrane proteins. The present study demonstrates the feasibility of membrane protein topology determ… ▽ More For many membrane proteins the determination of their topology remains a challenge for methods like X-ray crystallography and nuclear magnetic resonance (NMR) spectroscopy. Electron paramagnetic resonance (EPR) spectroscopy has evolved as an alternative technique to study structure and dynamics of membrane proteins. The present study demonstrates the feasibility of membrane protein topology determination using limited EPR distance and accessibility measurements. The BCL::MP-Fold (BioChemical Library membrane protein fold) algorithm assembles secondary structure elements (SSEs) in the membrane using a Monte Carlo Metropolis (MCM) approach. Sampled models are evaluated using knowledge-based potential functions and agreement with the EPR data and a knowledge-based energy function. Twenty-nine membrane proteins of up to 696 residues are used to test the algorithm. The RMSD100 value of the most accurate model is better than 8 Å for twenty-seven, better than 6 Å for twenty-two and better than 4 Å for fifteen out of twenty-nine proteins, demonstrating the algorithms ability to sample the native topology. The average enrichment could be improved from 1.3 to 2.5, showing the improved discrimination power by using EPR data. △ Less

Submitted 20 March, 2016; v1 submitted 31 March, 2015; originally announced March 2015.

Comments: 23 pages, 6 figures, 6 tables

Molecular wave-packet dynamics on laser-controlled transition states

Authors: Andreas Fischer, Martin Gärttner, Philipp Cörlin, Alexander Sperl, Michael Schönwald, Tomoya Mizuno, Giuseppe Sansone, Arne Senftleben, Joachim Ullrich, Bernold Feuerstein, Thomas Pfeifer, Robert Moshammer

Abstract: Understanding and controlling the electronic as well as ro-vibrational motion and, thus, the entire chemical dynamics in molecules is the ultimate goal of ultrafast laser and imaging science. In photochemistry, laser-induced dissociation has become a valuable tool for modification and control of reaction pathways and kinetics. Here, we present a pump-probe study of the dissociation dynamics of H… ▽ More Understanding and controlling the electronic as well as ro-vibrational motion and, thus, the entire chemical dynamics in molecules is the ultimate goal of ultrafast laser and imaging science. In photochemistry, laser-induced dissociation has become a valuable tool for modification and control of reaction pathways and kinetics. Here, we present a pump-probe study of the dissociation dynamics of H$_2^+$ using ultrashort extreme-ultraviolet (XUV) and near-infrared (IR) laser pulses. The reaction kinematics can be controlled by varying the pump-probe delay. We demonstrate that the nuclear motion through the transition state can be reduced to isolated pairs of initial vibrational states. The dynamics is well reproduced by intuitive semi-classical trajectories on a time-dependent potential curve. From this most fundamental scenario we gain insight in the underlying mechanisms which can be applied as design principles for molecular quantum control, particularly for ultrafast reactions involving protons. △ Less

Submitted 29 October, 2014; originally announced October 2014.

Comments: 7 pages and 3 figures. Supplementary materials: 6 pages and 3 figures

Journal ref: Phys. Rev. A 93, 012507 (2016)