-
Adaptive sampling strategy for tolerance analysis of freeform optical surfaces based on critical ray aiming
Authors:
Rundong Fan,
Shili Wei,
Zhuang Qian,
Huiru Ji,
Hao Tan,
Yan Mo,
Donglin Ma
Abstract:
The tolerance analysis of freeform surfaces plays a crucial role in the development of advanced imaging systems. However, the intricate relationship between surface error and imaging quality poses significant challenges, necessitating dense sampling of featured rays during the computation process to ensure an accurate tolerance for different fields of view (FOVs). Here, we propose an adaptive samp…
▽ More
The tolerance analysis of freeform surfaces plays a crucial role in the development of advanced imaging systems. However, the intricate relationship between surface error and imaging quality poses significant challenges, necessitating dense sampling of featured rays during the computation process to ensure an accurate tolerance for different fields of view (FOVs). Here, we propose an adaptive sampling strategy called "Critical Ray Aiming" for surface tolerance analysis. By identifying the most sensitive ray to wave aberration at each surface point, our methodology facilitates flexible sampling of the FOVs and entrance pupil (EP), achieving computational efficiency without compromising accuracy in determining tolerable surface error. We demonstrate the effectiveness of our method through tolerance analysis of two different freeform imaging systems.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Surface variation analysis of freeform optical systems over surface frequency bands for prescribed wavefront errors
Authors:
Rundong Fan,
Shili Wei,
Huiru JI,
Zhuang Qian,
Hao Tan,
Yan Mo,
Donglin MA
Abstract:
The surface errors of freeform surfaces reflect the manufacturing complexities and significantly impact the feasibility of processing designed optical systems. With multiple degrees of freedom, freeform surfaces pose challenges in surface tolerance analysis in the field. Nevertheless, current research has neglected the influence of surface slopes on the directions of ray propagation. A sudden alte…
▽ More
The surface errors of freeform surfaces reflect the manufacturing complexities and significantly impact the feasibility of processing designed optical systems. With multiple degrees of freedom, freeform surfaces pose challenges in surface tolerance analysis in the field. Nevertheless, current research has neglected the influence of surface slopes on the directions of ray propagation. A sudden alteration in the surface slope will lead to a corresponding abrupt shift in the wavefront, even when the change in surface sag is minimal. Moreover, within the realm of freeform surface manufacturing, variation in surface slope across different frequency bands may give rise to unique surface variation. Within the context of this study, we propose a tolerance analysis method to analyze surface variation in freeform surfaces considering surface frequency band slopes based on real ray data. This approach utilizes real ray data to rapidly evaluate surface variation within a specified frequency band of surface slopes. Crucially, our proposed method yields the capability to obtain system surface variation with significant wavefront aberration, in contrast to previous methodologies. The feasibility and advantages of this framework are assessed by analyzing a single-mirror system with a single field and an off-axis two-mirror system. We expect to integrate the proposed methodology with freeform surface design and manufacturing, thereby expanding the scope of freeform optics.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
High precision proton beam monitor system concept design on CSNS based on SiC
Authors:
Ye He,
Xingchen Li,
Zijun Xu,
Ming Qi,
Congcong Wang,
Chenwei Wang,
Hai Lu,
Xiaojun Nie,
Ruirui Fan,
Hantao Jing,
Weiming Song,
Keqi Wang,
Kai Liu,
Peilian Liu,
Hui Li,
Zaiyi Li,
Chenxi Fu,
Xiyuan Zhang,
Xiaoshen Kang,
Zhan Li,
Weiguo Lu,
Suyu Xiao,
Xin Shi
Abstract:
A high precision beam monitor system based on silicon carbide PIN sensor is designed for China Spallation Neutron Source 1.6 GeV proton beam to monitor the proton beam fluence.The concept design of the beam monitor system is finished together with front-end electronics with silicon carbide PIN sensors, readout system and mechanical system.Several tests are performed to study the performance of eac…
▽ More
A high precision beam monitor system based on silicon carbide PIN sensor is designed for China Spallation Neutron Source 1.6 GeV proton beam to monitor the proton beam fluence.The concept design of the beam monitor system is finished together with front-end electronics with silicon carbide PIN sensors, readout system and mechanical system.Several tests are performed to study the performance of each component of the system.The charge collection of the SiC PIN sensors after proton radiation is studied with 80 MeV proton beam for continuous running. Research on the performance of the front-end electronics and readout system is finished for better data acquisition.The uncertainty of proton beam fluence is below 1% in the beam monitor system.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Radiation hardness study of BC408 plastic scintillator under 80 MeV proton beam irradiations
Authors:
Yue Zhang,
Ruirui Fan,
Yuhong Yu,
Hantao Jing,
Zhixin Tan,
Yuhang Guo,
You Lv
Abstract:
To investigate the 1.6 GeV high-energy proton beam detector utilized in the CSNS Phase-II upgrade project, a plastic scintillator detector presents a viable option due to its superior radiation hardness. This study investigates the effects of irradiation damage on a BC408 plastic scintillator induced by 80 MeV protons, including absorption and fluorescence spectroscopy, and light yield tests of BC…
▽ More
To investigate the 1.6 GeV high-energy proton beam detector utilized in the CSNS Phase-II upgrade project, a plastic scintillator detector presents a viable option due to its superior radiation hardness. This study investigates the effects of irradiation damage on a BC408 plastic scintillator induced by 80 MeV protons, including absorption and fluorescence spectroscopy, and light yield tests of BC408 pre- and post-proton irradiation, with a focus on determining the radiation resistance threshold of BC408. The results indicate that the performance of BC408 remains unimpaired at absorbed doses up to 5.14*10^3 Gy/cm3, demonstrating its ability to absorb 1.63*10^13 p/cm3 1.6 GeV protons while maintaining stability. This suggests that BC408 could potentially be used as the 1.6 GeV high-energy proton beam detector in the CSNS Phase-II upgrade project.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Test to the Performance of a LGAD Based Zero Degree Detector on CSNS Back-n Beamline
Authors:
Yuhang Guo,
Mengzhao Li,
Mengchen Niu,
Zhijun Liang,
Ruirui Fan
Abstract:
A comprehensive and reliable nuclear database of neutron-induced process is required by the development of Accelerator-Driven System technology. Although many excellent efforts have been made, the measurements to the fission fragment in zero degree of the beam direction is not perfect enough. Most detector can not work constantly under the strike of intense flux neutron beam, thus their applicatio…
▽ More
A comprehensive and reliable nuclear database of neutron-induced process is required by the development of Accelerator-Driven System technology. Although many excellent efforts have been made, the measurements to the fission fragment in zero degree of the beam direction is not perfect enough. Most detector can not work constantly under the strike of intense flux neutron beam, thus their application as Zero Degree Detector (ZDD) is greatly limited. Recently, the Low Gain Avalanche Diode (LGAD) technology has been developed to meet the complicated and several requirement of ATLAS on Large Hadron Collider (LHC) and could survive after $2.5\times 10^{15}~n_{eq}/cm^2$ irradiation. With its 50 $μ$m active thickness, 30 ps temporal resolution, low cost and good radiation hardness property, the LGAD detector is expected to be an excellent candidate for the use of a Zero Degree Detector in neutron-induced process data measurements. This paper represents a performance test to LGAD detector when it is used as a ZDD on the Back-streaming Neutron (Back-n) beamline at CSNS. Measuring to the cross section of $^6Li(n,T)α$, it shows that the LGAD performs well as a ZDD based on a good agreement with the data from ENDF database.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Search for relativistic fractionally charged particles in space
Authors:
DAMPE Collaboration,
F. Alemanno,
C. Altomare,
Q. An,
P. Azzarello,
F. C. T. Barbato,
P. Bernardini,
X. J. Bi,
M. S. Cai,
E. Casilli,
E. Catanzani,
J. Chang,
D. Y. Chen,
J. L. Chen,
Z. F. Chen,
M. Y. Cui,
T. S. Cui,
Y. X. Cui,
H. T. Dai,
A. De-Benedittis,
I. De Mitri,
F. de Palma,
M. Deliyergiyev,
A. Di Giovanni,
M. Di Santo
, et al. (126 additional authors not shown)
Abstract:
More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been…
▽ More
More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been few searches for FCPs in cosmic rays carried out in orbit other than AMS-01 flown by a space shuttle and BESS by a balloon at the top of the atmosphere. In this study, we conduct an FCP search in space based on on-orbit data obtained using the DArk Matter Particle Explorer (DAMPE) satellite over a period of five years. Unlike underground experiments, which require an FCP energy of the order of hundreds of GeV, our FCP search starts at only a few GeV. An upper limit of $6.2\times 10^{-10}~~\mathrm{cm^{-2}sr^{-1} s^{-1}}$ is obtained for the flux. Our results demonstrate that DAMPE exhibits higher sensitivity than experiments of similar types by three orders of magnitude that more stringently restricts the conditions for the existence of FCP in primary cosmic rays.
△ Less
Submitted 9 September, 2022;
originally announced September 2022.
-
Timing performance simulation for 3D 4H-SiC detector
Authors:
Yuhang Tan,
Tao Yang,
Kai Liu,
Congcong Wang,
Xiyuan Zhang,
Mei Zhao,
Xiaochuan Xia,
Hongwei Liang,
Ruiliang Xu,
Yu Zhao,
Xiaoshen Kang,
Chenxi Fu,
Weimin Song,
Zhenzhong Zhang,
Ruirui Fan,
Xinbo Zou,
Xin Shi
Abstract:
To meet high radiation challenge for detectors in future high-energy physics, a novel 3D 4H-SiC detector was investigated. SiC detectors could potentially operate in radiation harsh and room temperature environment because of its high thermal conductivity and high atomic displacement threshold energy. 3D structure, which decouples thickness and distance between electrodes, further improves timing…
▽ More
To meet high radiation challenge for detectors in future high-energy physics, a novel 3D 4H-SiC detector was investigated. SiC detectors could potentially operate in radiation harsh and room temperature environment because of its high thermal conductivity and high atomic displacement threshold energy. 3D structure, which decouples thickness and distance between electrodes, further improves timing performance and radiation hardness of the detector. We developed a simulation software - RASER (RAdiation SEmiconductoR) to simulate the time resolution of planar and 3D 4H-SiC detectors with different parameters and structures, and the reliability of the software is verified by comparing time resolution results of simulation with data. The rough time resolution of 3D 4H-SiC detector was estimated, and the simulation parameters could be used as guideline to 3D 4H-SiC detector design and optimization.
△ Less
Submitted 27 March, 2022; v1 submitted 29 November, 2021;
originally announced November 2021.
-
GPU Optimization for High-Quality Kinetic Fluid Simulation
Authors:
Yixin Chen,
Wei Li,
Rui Fan,
Xiaopei Liu
Abstract:
Fluid simulations are often performed using the incompressible Navier-Stokes equations (INSE), leading to sparse linear systems which are difficult to solve efficiently in parallel. Recently, kinetic methods based on the adaptive-central-moment multiple-relaxation-time (ACM-MRT) model have demonstrated impressive capabilities to simulate both laminar and turbulent flows, with quality matching or s…
▽ More
Fluid simulations are often performed using the incompressible Navier-Stokes equations (INSE), leading to sparse linear systems which are difficult to solve efficiently in parallel. Recently, kinetic methods based on the adaptive-central-moment multiple-relaxation-time (ACM-MRT) model have demonstrated impressive capabilities to simulate both laminar and turbulent flows, with quality matching or surpassing that of state-of-the-art INSE solvers. Furthermore, due to its local formulation, this method presents the opportunity for highly scalable implementations on parallel systems such as GPUs. However, an efficient ACM-MRT-based kinetic solver needs to overcome a number of computational challenges, especially when dealing with complex solids inside the fluid domain. In this paper, we present multiple novel GPU optimization techniques to efficiently implement high-quality ACM-MRT-based kinetic fluid simulations in domains containing complex solids. Our techniques include a new communication-efficient data layout, a load-balanced immersed-boundary method, a multi-kernel launch method using a simplified formulation of ACM-MRT calculations to enable greater parallelism, and the integration of these techniques into a parametric cost model to enable automated parameter search to achieve optimal execution performance. We also extended our method to multi-GPU systems to enable large-scale simulations. To demonstrate the state-of-the-art performance and high visual quality of our solver, we present extensive experimental results and comparisons to other solvers.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Back-n White Neutron Source at CSNS and its Applications
Authors:
The CSNS Back-n Collaboration,
:,
Jing-Yu Tang,
Qi An,
Jiang-Bo Bai,
Jie Bao,
Yu Bao,
Ping Cao,
Hao-Lei Chen,
Qi-Ping Chen,
Yong-Hao Chen,
Zhen Chen,
Zeng-Qi Cui,
Rui-Rui Fan,
Chang-Qing Feng,
Ke-Qing Gao,
Xiao-Long Gao,
Min-Hao Gu,
Chang-Cai Han,
Zi-Jie Han,
Guo-Zhu He,
Yong-Cheng He,
Yang Hong,
Yi-Wei Hu,
Han-Xiong Huang
, et al. (52 additional authors not shown)
Abstract:
Back-streaming neutrons from the spallation target of the China Spallation Neutron Source (CSNS) that emit through the incoming proton channel were exploited to build a white neutron beam facility (the so-called Back-n white neutron source), which was completed in March 2018. The Back-n neutron beam is very intense, at approximately 2*10^7 n/cm^2/s at 55 m from the target, and has a nominal proton…
▽ More
Back-streaming neutrons from the spallation target of the China Spallation Neutron Source (CSNS) that emit through the incoming proton channel were exploited to build a white neutron beam facility (the so-called Back-n white neutron source), which was completed in March 2018. The Back-n neutron beam is very intense, at approximately 2*10^7 n/cm^2/s at 55 m from the target, and has a nominal proton beam with a power of 100 kW in the CSNS-I phase and a kinetic energy of 1.6 GeV and a thick tungsten target in multiple slices with modest moderation from the cooling water through the slices. In addition, the excellent energy spectrum spanning from 0.5 eV to 200 MeV, and a good time resolution related to the time-of-flight measurements make it a typical white neutron source for nuclear data measurements; its overall performance is among that of the best white neutron sources in the world. Equipped with advanced spectrometers, detectors, and application utilities, the Back-n facility can serve wide applications, with a focus on neutron-induced cross-section measurements. This article presents an overview of the neutron beam characteristics, the experimental setups, and the ongoing applications at Back-n.
△ Less
Submitted 16 January, 2021;
originally announced January 2021.
-
Topological Lattice Metamaterials -- A Platform For Novel Electromagnetic Material Design Based On An Artificial Topological "Atom"
Authors:
Wenjin Zhang,
Ziyuan Meng,
Zidong Zhang,
Ke Bi,
Runhua Fan,
Yi Du,
Weichang Hao
Abstract:
In nature, most materials are composed of atoms with periodic structures. Hence, it's impossible to introduce topological structures into their lattice compose, because the atoms as basic blocks cannot be modulated. However, the lattice compose of metamaterials can be designed conveniently. In our work, we propose to introduce topological non-trivial structures, Mobius unknots, as the basic block…
▽ More
In nature, most materials are composed of atoms with periodic structures. Hence, it's impossible to introduce topological structures into their lattice compose, because the atoms as basic blocks cannot be modulated. However, the lattice compose of metamaterials can be designed conveniently. In our work, we propose to introduce topological non-trivial structures, Mobius unknots, as the basic block (the artificial chiral "atoms") to design metamaterials. A 5.95 GHz intrinsic peak, in addition to the electrical resonance peak near 11 GHz on the transmission coefficient spectrum was confirmed by theoretical calculations, finite-difference time-domain (FDTD) simulations and experiments when electromagnetic waves transfer to a chiral Mobius unknot. Theoretical analysis indicates that this intrinsic peak originates from the phase transition caused by the electromagnetic waves propagate along the Mobius unknot non-trivial structure. It is similar to the state of spin-splitting of electron levels. Take the artificial chiral "atoms" - Mobius unknots as the basic block, we can construct two-dimensional and even three-dimensional ordered metamaterials. The simulation and experimental results showed that the response to electromagnetic wave in the GHz band can be modulated by the coupling between the periodic potential and the spin-like of energy levels.
△ Less
Submitted 4 October, 2020; v1 submitted 12 December, 2019;
originally announced December 2019.
-
Measurement of the neutron beam profile of the Back-n white neutron facility at CSNS with a Micromegas detector
Authors:
Binbin Qi,
Yang Li,
Danyang Zhu,
Zhiyong Zhang,
Ruirui Fan,
Jiang Pan,
Jianxin Feng,
Chengming Liu,
Changqing Feng,
Jianbei Liu,
Ming Shao,
Yi Zhou,
Yanfeng Wang,
Han Yi,
Qi An,
Huaiyong Bai,
Jie Bao,
Ping Cao,
Qiping Chen,
Yonghao Chen,
Pinjing Cheng,
Zengqi Cui,
Minhao Gu,
Fengqin Guo,
Changcai Han
, et al. (62 additional authors not shown)
Abstract:
The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was specially developed to measure the beam spot distribution for this beam line. In this article, the design, fabrication, and characterization of the detector ar…
▽ More
The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was specially developed to measure the beam spot distribution for this beam line. In this article, the design, fabrication, and characterization of the detector are described. The results of the detector performance tests are presented, which include the relative electron transparency, the gain and the gain uniformity, and the neutron beam profile reconstruction capability. The result of the first measurement of the Back-n neutron beam spot distribution is also presented.
△ Less
Submitted 19 January, 2020; v1 submitted 6 August, 2019;
originally announced August 2019.
-
I-mode investigation on the Experimental Advanced Superconducting Tokamak
Authors:
X. Feng,
A. D. Liu,
C. Zhou,
Z. X. Liu,
M. Y. Wang,
G. Zhuang,
X. L. Zou,
T. B. Wang,
Y. Z. Zhang,
J. L. Xie,
H. Q. Liu,
T. Zhang,
Y. Liu,
Y. M. Duan,
L. Q. Hu,
G. H. Hu,
D. F. Kong,
S. X. Wang,
H. L. Zhao,
Y. Y. Li,
L. M. Shao,
T. Y. Xia,
W. X. Ding,
T. Lan,
H. Li
, et al. (13 additional authors not shown)
Abstract:
By analyzing large quantities of discharges in the unfavorable ion $ \vec B\times \nabla B $ drift direction, the I-mode operation has been confirmed in EAST tokamak. During the L-mode to I-mode transition, the energy confinement has a prominent improvement by the formation of a high-temperature edge pedestal, while the particle confinement remains almost identical to that in the L-mode. Similar w…
▽ More
By analyzing large quantities of discharges in the unfavorable ion $ \vec B\times \nabla B $ drift direction, the I-mode operation has been confirmed in EAST tokamak. During the L-mode to I-mode transition, the energy confinement has a prominent improvement by the formation of a high-temperature edge pedestal, while the particle confinement remains almost identical to that in the L-mode. Similar with the I-mode observation on other devices, the $ E_r $ profiles obtained by the eight-channel Doppler backscattering system (DBS8)\cite{J.Q.Hu} show a deeper edge $ E_r $ well in the I-mode than that in the L-mode. And a weak coherent mode (WCM) with the frequency range of 40-150 kHz is observed at the edge plasma with the radial extend of about 2-3 cm. WCM could be observed in both density fluctuation and radial electric field fluctuation, and the bicoherence analyses showed significant couplings between WCM and high frequency turbulence, implying that the $ E_r $ fluctuation and the caused flow shear from WCM should play an important role during I-mode. In addition, a low-frequency oscillation with a frequency range of 5-10 kHz is always accompanied with WCM, where GAM intensity is decreased or disappeared. Many evidences show that the a low-frequency oscillation may be a novel kind of limited cycle oscillation but further investigations are needed to explain the new properties such as the harmonics and obvious magnetical perturbations.
△ Less
Submitted 31 May, 2019; v1 submitted 13 February, 2019;
originally announced February 2019.
-
In-flight performance of the DAMPE silicon tracker
Authors:
A. Tykhonov,
G. Ambrosi,
R. Asfandiyarov,
P. Azzarello,
P. Bernardini,
B. Bertucci,
A. Bolognini,
F. Cadoux,
A. D'Amone,
A. De Benedittis,
I. De Mitri,
M. Di Santo,
Y. F. Dong,
M. Duranti,
D. D'Urso,
R. R. Fan,
P. Fusco,
V. Gallo,
M. Gao,
F. Gargano,
S. Garrappa,
K. Gong,
M. Ionica,
D. La Marra,
F. Loparco
, et al. (17 additional authors not shown)
Abstract:
DAMPE (DArk Matter Particle Explorer) is a spaceborne high-energy cosmic ray and gamma-ray detector, successfully launched in December 2015. It is designed to probe astroparticle physics in the broad energy range from few GeV to 100 TeV. The scientific goals of DAMPE include the identification of possible signatures of Dark Matter annihilation or decay, the study of the origin and propagation mech…
▽ More
DAMPE (DArk Matter Particle Explorer) is a spaceborne high-energy cosmic ray and gamma-ray detector, successfully launched in December 2015. It is designed to probe astroparticle physics in the broad energy range from few GeV to 100 TeV. The scientific goals of DAMPE include the identification of possible signatures of Dark Matter annihilation or decay, the study of the origin and propagation mechanisms of cosmic-ray particles, and gamma-ray astronomy. DAMPE consists of four sub-detectors: a plastic scintillator strip detector, a Silicon-Tungsten tracKer-converter (STK), a BGO calorimeter and a neutron detector. The STK is composed of six double layers of single-sided silicon micro-strip detectors interleaved with three layers of tungsten for photon conversions into electron-positron pairs. The STK is a crucial component of DAMPE, allowing to determine the direction of incoming photons, to reconstruct tracks of cosmic rays and to estimate their absolute charge (Z). We present the in-flight performance of the STK based on two years of in-flight DAMPE data, which includes the noise behavior, signal response, thermal and mechanical stability, alignment and position resolution.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Electronics of Time-of-flight Measurement for Back-n at CSNS
Authors:
T. Yu,
P. Cao,
X. Y. Ji,
L. K. Xie,
X. R. Huang,
Q. An,
H. Y. Bai,
J. Bao,
Y. H. Chen,
P. J. Cheng,
Z. Q. Cui,
R. R. Fan,
C. Q. Feng,
M. H. Gu,
Z. J. Han,
G. Z. He,
Y. C. He,
Y. F. He,
H. X. Huang,
W. L. Huang,
X. L. Ji,
H. Y. Jiang,
W. Jiang,
H. Y. Jing,
L. Kang
, et al. (46 additional authors not shown)
Abstract:
Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXI…
▽ More
Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXIe (Peripheral Component Interconnect Express eXtensions for Instrumentation) platform, which is composed of FDM (Field Digitizer Modules), TCM (Trigger and Clock Module), and SCM (Signal Conditioning Module). T0 signal synchronous to the CSNS accelerator represents the neutron emission from the target. It is the start of time stamp. The trigger and clock module (TCM) receives, synchronizes and distributes the T0 signal to each FDM based on the PXIe backplane bus. Meantime, detector signals after being conditioned are fed into FDMs for waveform digitizing. First sample point of the signal is the stop of time stamp. According to the start, stop time stamp and the time of signal over threshold, the total TOF can be obtained. FPGA-based (Field Programmable Gate Array) TDC is implemented on TCM to accurately acquire the time interval between the asynchronous T0 signal and the global synchronous clock phase. There is also an FPGA-based TDC on FDM to accurately acquire the time interval between T0 arriving at FDM and the first sample point of the detector signal, the over threshold time of signal is obtained offline. This method for TOF measurement is efficient and not needed for additional modules. Test result shows the accuracy of TOF is sub-nanosecond and can meet the requirement for Back-n at CSNS.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
T0 Fan-out for Back-n White Neutron Facility at CSNS
Authors:
X. Y. Ji,
P. Cao,
T. Yu,
L. K. Xie,
X. R. Huang,
Q. An,
H. Y. Bai,
J. Bao,
Y. H. Chen,
P. J. Cheng,
Z. Q. Cui,
R. R. Fan,
C. Q. Feng,
M. H. Gu,
Z. J. Han,
G. Z. He,
Y. C. He,
Y. F. He,
H. X. Huang,
W. L. Huang,
X. L. Ji,
H. Y. Jiang,
W. Jiang,
H. Y. Jing,
L. Kang
, et al. (46 additional authors not shown)
Abstract:
the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal,…
▽ More
the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal, generated from the CSNS accelerator, represents this start time. Besides, the T0 signal is also used as the gate control signal that triggers the readout electronics. Obviously, the timing precision of T0 directly affects the measurement precision of TOF and controls the running or readout electronics. In this paper, the T0 fan-out for Back-n white neutron facility at CSNS is proposed. The T0 signal travelling from the CSNS accelerator is fanned out to the two underground experiment stations respectively over long cables. To guarantee the timing precision, T0 signal is conditioned with good signal edge. Furthermore, techniques of signal pre-emphasizing and equalizing are used to improve signal quality after T0 being transmitted over long cables with about 100 m length. Experiments show that the T0 fan-out works well, the T0 signal transmitted over 100 m remains a good time resolution with a standard deviation of 25 ps. It absolutely meets the required accuracy of the measurement of TOF.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
Breaking Pauli blockade via ultrafast cooling of hot electrons in optically-pumped graphene
Authors:
Yingying Zhu,
Lianzi Liu,
Jianan Wang,
Ruwen Peng,
Dongxiang Qi,
Wenzhong Bao,
Renhao Fan,
Mu Wang
Abstract:
Pauli blockade occurs when the excited electrons fill up the states near the conduction bands and block subsequent absorption in semiconductors, and has been widely applied in mode-locking for passively-pulsed-laser systems. In this letter, we report the first direct observation that the Pauli blockade is broken by ultrafast cooling of hot electrons in optically-pumped graphene. With femtosecond s…
▽ More
Pauli blockade occurs when the excited electrons fill up the states near the conduction bands and block subsequent absorption in semiconductors, and has been widely applied in mode-locking for passively-pulsed-laser systems. In this letter, we report the first direct observation that the Pauli blockade is broken by ultrafast cooling of hot electrons in optically-pumped graphene. With femtosecond spectroscopy, we demonstrate that the time scale to excite an electron (~100 fs) is of the same order as that of the electron decay via electron-electron scattering, which allows the electron excitation interplays strongly with the cooling of hot electrons. Consequently, Pauli blockade is dismissed, leading to an unconventionally enhanced optical absorption. We suggest that this effect is a universal feature of two-dimensional layered materials, which sheds the light of ultrafast carrier dynamics in nonlinear physics and inspires the designing of new-generation of ultrafast optoelectronic devices.
△ Less
Submitted 13 July, 2018; v1 submitted 12 June, 2018;
originally announced June 2018.
-
Internal alignment and position resolution of the silicon tracker of DAMPE determined with orbit data
Authors:
A. Tykhonov,
G. Ambrosi,
R. Asfandiyarov,
P. Azzarello,
P. Bernardini,
B. Bertucci,
A. Bolognini,
F. Cadoux,
A. D'Amone,
A. De Benedittis,
I. De Mitri,
M. Di Santo,
Y. F. Dong,
M. Duranti,
D. D'Urso,
R. R. Fan,
P. Fusco,
V. Gallo,
M. Gao,
F. Gargano,
S. Garrappa,
K. Gong,
M. Ionica,
D. La Marra,
S. J. Lei
, et al. (18 additional authors not shown)
Abstract:
The DArk Matter Particle Explorer (DAMPE) is a space-borne particle detector designed to probe electrons and gamma-rays in the few GeV to 10 TeV energy range, as well as cosmic-ray proton and nuclei components between 10 GeV and 100 TeV. The silicon-tungsten tracker-converter is a crucial component of DAMPE. It allows the direction of incoming photons converting into electron-positron pairs to be…
▽ More
The DArk Matter Particle Explorer (DAMPE) is a space-borne particle detector designed to probe electrons and gamma-rays in the few GeV to 10 TeV energy range, as well as cosmic-ray proton and nuclei components between 10 GeV and 100 TeV. The silicon-tungsten tracker-converter is a crucial component of DAMPE. It allows the direction of incoming photons converting into electron-positron pairs to be estimated, and the trajectory and charge (Z) of cosmic-ray particles to be identified. It consists of 768 silicon micro-strip sensors assembled in 6 double layers with a total active area of 6.6 m$^2$. Silicon planes are interleaved with three layers of tungsten plates, resulting in about one radiation length of material in the tracker. Internal alignment parameters of the tracker have been determined on orbit, with non-showering protons and helium nuclei. We describe the alignment procedure and present the position resolution and alignment stability measurements.
△ Less
Submitted 22 March, 2018; v1 submitted 7 December, 2017;
originally announced December 2017.
-
Energy-resolved fast neutron resonance radiography at CSNS
Authors:
Zhixin Tan,
Jingyu Tang,
Hantao Jing,
Ruirui Fan,
Qiang Li,
Changjun Ning,
Jie Bao,
Xichao Ruan,
Guangyuan Luan,
Changqin Feng,
Xianpeng Zhang
Abstract:
The white neutron beamline at the China Spallation Neutron Source will be used mainly for nuclear data measurements. It will be characterized by high flux and broad energy spectra. To exploit the beamline as a neutron imaging source, we propose a liquid scintillator fiber array for fast neutron resonance radiography. The fiber detector unit has a small exposed area, which will limit the event coun…
▽ More
The white neutron beamline at the China Spallation Neutron Source will be used mainly for nuclear data measurements. It will be characterized by high flux and broad energy spectra. To exploit the beamline as a neutron imaging source, we propose a liquid scintillator fiber array for fast neutron resonance radiography. The fiber detector unit has a small exposed area, which will limit the event counts and separate the events in time, thus satisfying the requirements for single-event time-of-flight (SEToF) measurement. The current study addresses the physical design criteria for ToF measurement, including flux estimation and detector response. Future development and potential application of the technology are also discussed.
△ Less
Submitted 21 May, 2018; v1 submitted 1 August, 2017;
originally announced August 2017.
-
The DArk Matter Particle Explorer mission
Authors:
J. Chang,
G. Ambrosi,
Q. An,
R. Asfandiyarov,
P. Azzarello,
P. Bernardini,
B. Bertucci,
M. S. Cai,
M. Caragiulo,
D. Y. Chen,
H. F. Chen,
J. L. Chen,
W. Chen,
M. Y. Cui,
T. S. Cui,
A. D'Amone,
A. De Benedittis,
I. De Mitri,
M. Di Santo,
J. N. Dong,
T. K. Dong,
Y. F. Dong,
Z. X. Dong,
G. Donvito,
D. Droz
, et al. (139 additional authors not shown)
Abstract:
The DArk Matter Particle Explorer (DAMPE), one of the four scientific space science missions within the framework of the Strategic Pioneer Program on Space Science of the Chinese Academy of Sciences, is a general purpose high energy cosmic-ray and gamma-ray observatory, which was successfully launched on December 17th, 2015 from the Jiuquan Satellite Launch Center. The DAMPE scientific objectives…
▽ More
The DArk Matter Particle Explorer (DAMPE), one of the four scientific space science missions within the framework of the Strategic Pioneer Program on Space Science of the Chinese Academy of Sciences, is a general purpose high energy cosmic-ray and gamma-ray observatory, which was successfully launched on December 17th, 2015 from the Jiuquan Satellite Launch Center. The DAMPE scientific objectives include the study of galactic cosmic rays up to $\sim 10$ TeV and hundreds of TeV for electrons/gammas and nuclei respectively, and the search for dark matter signatures in their spectra. In this paper we illustrate the layout of the DAMPE instrument, and discuss the results of beam tests and calibrations performed on ground. Finally we present the expected performance in space and give an overview of the mission key scientific goals.
△ Less
Submitted 14 September, 2017; v1 submitted 26 June, 2017;
originally announced June 2017.
-
A GPU-Based Solution to Fast Calculation of Betweenness Centrality on Large Weighted Networks
Authors:
Rui Fan,
Ke Xu,
Jichang Zhao
Abstract:
Recent decades have witnessed the tremendous development of network science, which indeed brings a new and insightful language to model real systems of different domains. Betweenness, a widely employed centrality in network science, is a decent proxy in investigating network loads and rankings. However, the extremely high computational cost greatly prevents its applying on large networks. Though s…
▽ More
Recent decades have witnessed the tremendous development of network science, which indeed brings a new and insightful language to model real systems of different domains. Betweenness, a widely employed centrality in network science, is a decent proxy in investigating network loads and rankings. However, the extremely high computational cost greatly prevents its applying on large networks. Though several parallel algorithms have been presented to reduce its calculation cost on unweighted networks, a fast solution for weighted networks, which are in fact more ubiquitous than unweighted ones in reality, is still missing. In this study, we develop an efficient parallel GPU-based approach to boost the calculation of betweenness centrality on very large and weighted networks. Comprehensive and systematic evaluations on both synthetic and real-world networks demonstrate that our solution can arrive the performance of 30x to 150x speedup over the CPU implementation by integrating the work-efficient and warp-centric strategies. Our algorithm is completely open-sourced and free to the community and it is public available through https://dx.doi.org/10.6084/m9.figshare.4542405. Considering the pervasive deployment and declining price of GPU on personal computers and servers, our solution will indeed offer unprecedented opportunities for exploring the betweenness related problems in network science.
△ Less
Submitted 20 January, 2017;
originally announced January 2017.
-
Higher contagion and weaker ties mean anger spreads faster than joy in social media
Authors:
Rui Fan,
Ke Xu,
Jichang Zhao
Abstract:
Increasing evidence suggests that, similar to face-to-face communications, human emotions also spread in online social media. However, the mechanisms underlying this emotional contagion, for example, whether different feelings spread in unlikely ways or how the spread of emotions relates to the social network, is rarely investigated. Indeed, because of high costs and spatio-temporal limitations, e…
▽ More
Increasing evidence suggests that, similar to face-to-face communications, human emotions also spread in online social media. However, the mechanisms underlying this emotional contagion, for example, whether different feelings spread in unlikely ways or how the spread of emotions relates to the social network, is rarely investigated. Indeed, because of high costs and spatio-temporal limitations, explorations of this topic are challenging using conventional questionnaires or controlled experiments. Because they are collection points for natural affective responses of massive individuals, online social media sites offer an ideal proxy for tackling this issue from the perspective of computational social science. In this paper, based on the analysis of millions of tweets in Weibo, surprisingly, we find that anger is more contagious than joy, indicating that it can spark more angry follow-up tweets. Moreover, regarding dissemination in social networks, anger travels easily along weaker ties than joy, meaning that it can infiltrate different communities and break free of local traps because strangers share such content more often. Through a simple diffusion model, we reveal that greater contagion and weaker ties function cooperatively to speed up anger's spread. The diffusion of real-world events with different dominant emotions provides further testimony to the findings. To the best of our knowledge, this is the first time that quantitative long-term evidence has been presented that reveals a difference in the mechanism by which joy and anger are disseminated. Our findings shed light on both personal anger management in human communications and on controlling collective outrage in cyberspace.
△ Less
Submitted 26 December, 2016; v1 submitted 11 August, 2016;
originally announced August 2016.
-
Design of the readout electronics for the DAMPE Silicon Tracker detector
Authors:
Fei Zhang,
Wen-Xi Peng,
Ke Gong,
Di Wu,
Yi-Fan Dong,
Rui Qiao,
Rui-Rui Fan,
Jin-Zhou Wang,
Huan-Yu Wang,
Xin Wu,
Daniel La Marra,
Philipp Azzarello,
Valentina Gallo,
Giovanni Ambrosi,
Andrea Nardinocchi
Abstract:
The Silicon Tracker (STK) is a detector of the DAMPE satellite to measure the incidence direction of high energy cosmic ray. It consists of 6 X-Y double layers of silicon micro-strip detectors with 73,728 readout channels. It's a great challenge to readout the channels and process the huge volume of data in the critical space environment. 1152 Application Specific Integrated Circuits (ASIC) and 38…
▽ More
The Silicon Tracker (STK) is a detector of the DAMPE satellite to measure the incidence direction of high energy cosmic ray. It consists of 6 X-Y double layers of silicon micro-strip detectors with 73,728 readout channels. It's a great challenge to readout the channels and process the huge volume of data in the critical space environment. 1152 Application Specific Integrated Circuits (ASIC) and 384 ADCs are adopted to readout the detector channels. The 192 Tracker Front-end Hybrid (TFH) modules and 8 identical Tracker Readout Board (TRB) modules are designed to control and digitalize the front signals. In this paper, the design of the readout electronics for STK and its performance will be presented in detail.
△ Less
Submitted 16 June, 2016;
originally announced June 2016.
-
DAMPE silicon tracker on-board data compression algorithm
Authors:
Yifan Dong,
Fei Zhang,
Rui Qiao,
Wenxi Peng,
Ruirui Fan,
Ke Gong,
Di Wu,
Huanyu Wang
Abstract:
The Dark Matter Particle Explorer (DAMPE) is an upcoming scientific satellite mission for high energy gamma-ray, electron and cosmic rays detection. The silicon tracker (STK) is a sub detector of the DAMPE payload with an excellent position resolution (readout pitch of 242um), which measures the incident direction of particles, as well as charge. The STK consists 12 layers of Silicon Micro-strip D…
▽ More
The Dark Matter Particle Explorer (DAMPE) is an upcoming scientific satellite mission for high energy gamma-ray, electron and cosmic rays detection. The silicon tracker (STK) is a sub detector of the DAMPE payload with an excellent position resolution (readout pitch of 242um), which measures the incident direction of particles, as well as charge. The STK consists 12 layers of Silicon Micro-strip Detector (SMD), equivalent to a total silicon area of 6.5m$^2$. The total readout channels of the STK are 73728, which leads to a huge amount of raw data to be dealt. In this paper, we focus on the on-board data compression algorithm and procedure in the STK, which was initially verified by cosmic-ray measurements.
△ Less
Submitted 2 March, 2015;
originally announced March 2015.
-
The silicon matrix for the prototype for the Dark Matter Particle Explorer
Authors:
R. R. Fan,
F. Zhang,
W. X. Peng,
Y. F. Dong,
K. Gong,
S. Yang,
D. Y. Guo,
J. Z. Wang,
M. Gao,
X. H. Liang,
J. Y. Zhang,
X. Z. Cui,
Y. Q. Liu,
H. Y. Wang
Abstract:
A new generation detector for the high energy cosmic ray - the DAMPE(DArk Matter Particle Explorer) is a satellite based project. Its main object is the measurement of energy spectrum of cosmic ray nuclei from 100GeV to 100TeV, the high energy electrons and gamma ray from 5GeV to 10TeV. A silicon matrix detector described in this paper, is employed for the sea level cosmic ray energy and position…
▽ More
A new generation detector for the high energy cosmic ray - the DAMPE(DArk Matter Particle Explorer) is a satellite based project. Its main object is the measurement of energy spectrum of cosmic ray nuclei from 100GeV to 100TeV, the high energy electrons and gamma ray from 5GeV to 10TeV. A silicon matrix detector described in this paper, is employed for the sea level cosmic ray energy and position detection while the prototype testing of the DAMPE. This matrix is composed by the 180 silicon PIN detectors, which covers an area of 32*20 cm2. The primary testing results are shown including MIPs energy spectrum and the position sensitive map.
△ Less
Submitted 19 May, 2014; v1 submitted 7 March, 2014;
originally announced March 2014.
-
Physical Design and Monte Carlo Simulations of a Space Radiation Detector onboard the SJ-10 satellite
Authors:
Yaqing Liu,
Huanyu Wang,
Xingzhu Cui,
Wenxi Peng,
Ruirui Fan,
Xiaohua Liang Ming Gao,
Yunlong Zhang,
Chengmo Zhang,
Jiayu Zhang,
Jiawei Yang,
Jinzhou Wang,
Fei Zhang Yifan Dong,
Dongya Guo,
Dawei Zhou
Abstract:
A radiation gene box (RGB) onboard the SJ-10 satellite is a device carrying mice and drosophila cells to determine the biological effects of space radiation environment. The shielded fluxes of different radioactive sources were calculated and the linear energy transfers of gamma-rays, electrons, protons and alpha-particles in tissue were acquired using A-150 tissue-equivalent plastic. Then, a conc…
▽ More
A radiation gene box (RGB) onboard the SJ-10 satellite is a device carrying mice and drosophila cells to determine the biological effects of space radiation environment. The shielded fluxes of different radioactive sources were calculated and the linear energy transfers of gamma-rays, electrons, protons and alpha-particles in tissue were acquired using A-150 tissue-equivalent plastic. Then, a conceptual model of a space radiation instrument employing three semiconductor sub-detectors for deriving the charged and uncharged radiation environment of the RGB was designed. The energy depositions in the three sub-detectors were classified into fifteen channels (bins) in an algorithm derived from the Monte Carlo method. The physical feasibility of the conceptual instrument was also verified by Monte Carlo simulations.
△ Less
Submitted 18 April, 2014; v1 submitted 3 March, 2014;
originally announced March 2014.
-
Position-sensitive spectral splitting with a plasmonic nanowire on silicon chip
Authors:
Qing Hu,
Di-Hu Xu,
Yu Zhou,
Ru-Wen Peng,
Ren-Hao Fan,
Nicholas X. Fang,
Qian-Jin Wang,
Xian-Rong uang,
Mu Wang
Abstract:
On-chip nanophotonics serves as the foundation for the new generation of information technology, but it is challenged by the diffraction limit of light. With the capabilities of confining light into (deep) subwavelength volumes, plasmonics makes it possible to dramatically miniaturize optical devices so as to integrate them into silicon chips. Here we demonstrate that by cascading nano-corrugation…
▽ More
On-chip nanophotonics serves as the foundation for the new generation of information technology, but it is challenged by the diffraction limit of light. With the capabilities of confining light into (deep) subwavelength volumes, plasmonics makes it possible to dramatically miniaturize optical devices so as to integrate them into silicon chips. Here we demonstrate that by cascading nano-corrugation gratings with different periodicities on silver nanowires atop silicon, different colors can be spatially separated and chronologically released at different grating junctions. The released light frequency depends on the grating arrangement and corrugation periodicities. Hence the nanowire acts as a spectral splitter for sorting/demultiplexing photons at different nano-scale positions with a ten-femtosecond-level interval. Such nanowires can be constructed further into compact 2D networks or circuits. We believe that this study provides a new and promising approach for realizing spatiotemporal-sensitive spectral splitting and optical signal processing on nanoscales, and for general integration of nanophotonics with microelectronics.
△ Less
Submitted 4 November, 2013;
originally announced November 2013.
-
Anger is More Influential Than Joy: Sentiment Correlation in Weibo
Authors:
Rui Fan,
Jichang Zhao,
Yan Chen,
Ke Xu
Abstract:
Recent years have witnessed the tremendous growth of the online social media. In China, Weibo, a Twitter-like service, has attracted more than 500 million users in less than four years. Connected by online social ties, different users influence each other emotionally. We find the correlation of anger among users is significantly higher than that of joy, which indicates that angry emotion could spr…
▽ More
Recent years have witnessed the tremendous growth of the online social media. In China, Weibo, a Twitter-like service, has attracted more than 500 million users in less than four years. Connected by online social ties, different users influence each other emotionally. We find the correlation of anger among users is significantly higher than that of joy, which indicates that angry emotion could spread more quickly and broadly in the network. While the correlation of sadness is surprisingly low and highly fluctuated. Moreover, there is a stronger sentiment correlation between a pair of users if they share more interactions. And users with larger number of friends posses more significant sentiment influence to their neighborhoods. Our findings could provide insights for modeling sentiment influence and propagation in online social networks.
△ Less
Submitted 10 September, 2013;
originally announced September 2013.
-
Current-driven Flow across a Stationary Jellyfish
Authors:
Christina Hamlet,
Laura Miller,
Roger Fan,
Makani Dollinger,
Steve Harenber
Abstract:
We present several dye visualization and numerical simulation fluid dynamics videos of a sessile jellyfish subjected to channel flow. The low resolution video and the high resolution video display the vortex patterns in different channel flows. This description accompanies the video submission V038 to the 2011 APS DFD Gallery of Fluid Motion.
We present several dye visualization and numerical simulation fluid dynamics videos of a sessile jellyfish subjected to channel flow. The low resolution video and the high resolution video display the vortex patterns in different channel flows. This description accompanies the video submission V038 to the 2011 APS DFD Gallery of Fluid Motion.
△ Less
Submitted 13 October, 2011;
originally announced October 2011.
-
Study of measuring methods on spatial resolution of a GEM imaging detector
Authors:
Xin-Yu Lu,
Rui-Rui Fan,
Yuan-Bo Chen,
Qun Ouyang,
Rong-Guang Liu,
Peng Liu,
Hui-Rong Qi,
Jian Zhang,
Ping-Ping Zhao,
Dong-Xu Zhao,
Yu-Bin Zhao,
Hong-Yu Zhang,
Hua-Yi Sheng,
Li-Yuan Dong
Abstract:
In this paper, limitations of the common method measuring intrinsic spatial resolution of the GEM imaging detector are presented. Through theoretical analysis and experimental verification, we have improved the common method to avoid these limitations. Using these improved methods, more precise measurement of intrinsic spatial resolution are obtained.
In this paper, limitations of the common method measuring intrinsic spatial resolution of the GEM imaging detector are presented. Through theoretical analysis and experimental verification, we have improved the common method to avoid these limitations. Using these improved methods, more precise measurement of intrinsic spatial resolution are obtained.
△ Less
Submitted 12 August, 2011; v1 submitted 25 May, 2011;
originally announced May 2011.
