-
Angular dependent measurement of electron-ion recombination in liquid argon for ionization calorimetry in the ICARUS liquid argon time projection chamber
Authors:
ICARUS collaboration,
P. Abratenko,
N. Abrego-Martinez,
A. Aduszkiewicz,
F. Akbar,
L. Aliaga Soplin,
M. Artero Pons,
J. Asaadi,
W. F. Badgett,
B. Baibussinov,
B. Behera,
V. Bellini,
R. Benocci,
S. Berkman,
S. Bertolucci,
M. Betancourt,
M. Bonesini,
T. Boone,
B. Bottino,
A. Braggiotti,
D. Brailsford,
S. J. Brice,
V. Brio,
C. Brizzolari,
H. S. Budd A. Campani
, et al. (154 additional authors not shown)
Abstract:
This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are us…
▽ More
This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are used for the calorimetric energy scale calibration of the ICARUS TPC, which is also presented. The impact of the EMB model is studied on calorimetric particle identification, as well as muon and proton energy measurements. Accounting for the angular dependence in EMB recombination improves the accuracy and precision of these measurements.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Calibration and simulation of ionization signal and electronics noise in the ICARUS liquid argon time projection chamber
Authors:
ICARUS collaboration,
P. Abratenko,
N. Abrego-Martinez,
A. Aduszkiewicz,
F. Akbar,
L. Aliaga Soplin,
M. Artero Pons,
J. Asaadi,
W. F. Badgett,
B. Baibussinov,
B. Behera,
V. Bellini,
R. Benocci,
S. Berkman,
S. Bertolucci,
M. Betancourt,
M. Bonesini,
T. Boone,
B. Bottino,
A. Braggiotti,
D. Brailsford,
S. J. Brice,
V. Brio,
C. Brizzolari,
H. S. Budd A. Campani
, et al. (153 additional authors not shown)
Abstract:
The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedu…
▽ More
The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedure removes non-uniformities in the ICARUS TPC response to charge in space and time. This work leverages the copious number of cosmic ray muons available to ICARUS at the surface. The ionization signal shape simulation applies a novel procedure that tunes the simulation to match what is measured in data. The end result of the equalization procedure and simulation tuning allows for a comparison of charge measurements in ICARUS between Monte Carlo simulation and data, showing good performance with minimal residual bias between the two.
△ Less
Submitted 16 July, 2024;
originally announced July 2024.
-
Bayesian inference of physics-based models of acoustically-forced laminar premixed conical flames
Authors:
Alessandro Giannotta,
Matthew Yoko,
Stefania Cherubini,
Pietro De Palma,
Matthew P. Juniper
Abstract:
We perform twenty experiments on an acoustically-forced laminar premixed Bunsen flame and assimilate high-speed footage of the natural emission into a physics-based model containing seven parameters. The experimental rig is a ducted Bunsen flame supplied by a mixture of methane and ethylene. A high-speed camera captures the natural emission of the flame, from which we extract the position of the f…
▽ More
We perform twenty experiments on an acoustically-forced laminar premixed Bunsen flame and assimilate high-speed footage of the natural emission into a physics-based model containing seven parameters. The experimental rig is a ducted Bunsen flame supplied by a mixture of methane and ethylene. A high-speed camera captures the natural emission of the flame, from which we extract the position of the flame front. We use Bayesian inference to combine this experimental data with our prior knowledge of this flame's behaviour. This prior knowledge is expressed through (i) a model of the kinematics of a flame front moving through a model of the perturbed velocity field, and (ii) a priori estimates of the parameters of the above model with quantified uncertainties. We find the most probable a posteriori model parameters using Bayesian parameter inference, and quantify their uncertainties using Laplace's method combined with first-order adjoint methods. This is substantially cheaper than other common Bayesian inference frameworks, such as Markov Chain Monte Carlo. This process results in a quantitatively-accurate physics-based reduced-order model of the acoustically forced Bunsen flame for injection velocities ranging from 1.75 m/s to 2.99 m/s and equivalence ratio values ranging from 1.26 to 1.47, using seven parameters. We use this model to evaluate the heat release rate between experimental snapshots, to extrapolate to different experimental conditions, and to calculate the flame transfer function and its uncertainty for all the flames. Since the proposed model relies on only seven parameters, it can be trained with little data and successfully extrapolates beyond the training dataset. Matlab code is provided so that the reader can apply it to assimilate further flame images into the model.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Enhancing Data-Assimilation in CFD using Graph Neural Networks
Authors:
Michele Quattromini,
Michele Alessandro Bucci,
Stefania Cherubini,
Onofrio Semeraro
Abstract:
We present a novel machine learning approach for data assimilation applied in fluid mechanics, based on adjoint-optimization augmented by Graph Neural Networks (GNNs) models. We consider as baseline the Reynolds-Averaged Navier-Stokes (RANS) equations, where the unknown is the meanflow and a closure model based on the Reynolds-stress tensor is required for correctly computing the solution. An end-…
▽ More
We present a novel machine learning approach for data assimilation applied in fluid mechanics, based on adjoint-optimization augmented by Graph Neural Networks (GNNs) models. We consider as baseline the Reynolds-Averaged Navier-Stokes (RANS) equations, where the unknown is the meanflow and a closure model based on the Reynolds-stress tensor is required for correctly computing the solution. An end-to-end process is cast; first, we train a GNN model for the closure term. Second, the GNN model is introduced in the training process of data assimilation, where the RANS equations act as a physics constraint for a consistent prediction. We obtain our results using direct numerical simulations based on a Finite Element Method (FEM) solver; a two-fold interface between the GNN model and the solver allows the GNN's predictions to be incorporated into post-processing steps of the FEM analysis. The proposed scheme provides an excellent reconstruction of the meanflow without any features selection; preliminary results show promising generalization properties over unseen flow configurations.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacova,
B. Baret,
A. Bariego Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (259 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl…
▽ More
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Operator learning of RANS equations: a Graph Neural Network closure model
Authors:
Michele Quattromini,
Michele Alessandro Bucci,
Stefania Cherubini,
Onofrio Semeraro
Abstract:
The spread of machine learning (ML) techniques in combination with the availability of high-quality experimental and numerical data boosted in recent years numerous applications in fluid mechanics. Among those, examples of closure models for turbulent flows or data-assimilation based on neural networks (NN) are already numerous. However, it is well known that these techniques are prone to over-fit…
▽ More
The spread of machine learning (ML) techniques in combination with the availability of high-quality experimental and numerical data boosted in recent years numerous applications in fluid mechanics. Among those, examples of closure models for turbulent flows or data-assimilation based on neural networks (NN) are already numerous. However, it is well known that these techniques are prone to over-fit and necessitate an exceedingly large amount of data, unless enforcing physical constraints. We address those limitations by applying graph neural networks (GNN). This architecture is characterized by a net of nodes that can be easily adapted to unstructured meshes. Moreover, it is known GNN can show remarkable generalization capabilities as compared to standard network models. Here, we demonstrate the use of GNN by interfacing them with a finite elements (FEM) solver for the supervised learning of Reynolds-averaged Navier--Stokes equations. We consider as a test-case the flow past bluff bodies; we train the model using the wake past a cylinder, at different Reynolds numbers 40<Re<150 and resolved on different grids. The GNN model successfully predicts the Reynolds stress also in unseen cases characterized by different geometric configurations and Reynolds numbers. Interestingly, a small data-set is used for achieving these performances, thus suggesting the applications of GNN in replacement of less flexible techniques such as convolutional NN.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
The ASIMOV Prize for scientific publishing -- HEP researchers trigger young people toward science
Authors:
Andrea Ventura,
Wanda Maria Alberico,
Roberta Antolini,
Silvia Arezzini,
Lorenzo Bellagamba,
Nicola Cavallo,
Claudia Cecchi,
Silvio Cherubini,
Roberta Colalillo,
Giuseppe Di Sciascio,
Carla Distefano,
Silvano Fuso,
Giuliana Galati,
Rebecca Hueting,
Sandra Leone,
Marcello Lissia,
Silvia Miozzi,
Daniele Mura,
Alessandro Papa,
Anna Parisi,
Giovanni Maria Piacentino,
Carlo Puggioni,
Marco Radici,
Sonia Sebastiani,
Antonio Sidoti
, et al. (6 additional authors not shown)
Abstract:
This work presents the ASIMOV Prize for scientific publishing, which was launched in Italy in 2016. The prize aims to bring the young generations closer to scientific culture, through the critical reading of popular science books. The books are selected by a committee that includes scientists, professors, Ph.D. and Ph.D. students, writers, journalists and friends of culture, and most importantly,…
▽ More
This work presents the ASIMOV Prize for scientific publishing, which was launched in Italy in 2016. The prize aims to bring the young generations closer to scientific culture, through the critical reading of popular science books. The books are selected by a committee that includes scientists, professors, Ph.D. and Ph.D. students, writers, journalists and friends of culture, and most importantly, over 800 school teachers. Students are actively involved in the prize, according to the best practices of public engagement: they read, review the books and vote for them, choosing the winner. The experience is quite successful: 12,000 students from 270 schools all over Italy participated in the last edition. The possibility of replicating this experience in other countries is indicated, as was done in Brazil in 2020 with more than encouraging results.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Turbulent transition in a channel with superhydrophobic walls: the effect of roughness anisotropy
Authors:
Antoine Jouin,
Stefania Cherubini,
Jean-Christophe Robinet
Abstract:
Superhydrophobic surfaces dramatically reduce skin friction of overlying liquid flows. These surfaces are complex and numerical simulations usually rely on models for reducing this complexity. One of the simplest consists in finding an equivalent boundary condition through an homogenisation procedure, which in the case of channel flow over oriented riblets, leads to the presence of a small spanwis…
▽ More
Superhydrophobic surfaces dramatically reduce skin friction of overlying liquid flows. These surfaces are complex and numerical simulations usually rely on models for reducing this complexity. One of the simplest consists in finding an equivalent boundary condition through an homogenisation procedure, which in the case of channel flow over oriented riblets, leads to the presence of a small spanwise component in the homogenized base flow velocity. This work aims at investigating the influence of such a three-dimensionality of the base flow on stability and transition in a channel with walls covered by oriented riblets. Linear stability for this base flow is investigated: a new instability region, linked to cross-flow effects, is observed. Tollmien-Schlichting waves are also retrieved but the most unstable are three-dimensional. Transient growth is also affected as oblique streaks with non-zero streamwise wavenumber become the most amplified perturbations. When transition is induced by Tollmien-Schlichting waves, after an initial exponential growth regime, streaky structures with large spanwise wavenumber rapidly arise. Modal mechanisms appear to play a leading role in the development of these structures and a secondary stability analysis is realised to retrieve successfully some of their characteristics. The second scenario, initiated with crossflow vortices, displays a strong influence of nonlinearities. The flow develops into large quasi spanwise-invariant structures before breaking down to turbulence. Secondary stability on the saturated cross-flow vortices sheds light on this stage of transition. In both cases, cross-flow effects dominate the flow dynamics, suggestings the need to consider these effects when modelling superhydrophobic surfaces.
△ Less
Submitted 2 August, 2022;
originally announced August 2022.
-
Collective secondary instabilities: an application to three-dimensional boundary-layer flow
Authors:
Antoine Jouin,
Stefania Cherubini,
Jean-Christophe Robinet
Abstract:
In some linearly unstable flows, secondary instability is found to have a much larger wavelength than that of the primary unstable modes, so that it cannot be recovered with a classical Floquet analysis. In this work, we apply a new formulation for capturing secondary instabilities coupling multiple length scales of the primary mode. This formulation, based on two-dimensional stability analysis co…
▽ More
In some linearly unstable flows, secondary instability is found to have a much larger wavelength than that of the primary unstable modes, so that it cannot be recovered with a classical Floquet analysis. In this work, we apply a new formulation for capturing secondary instabilities coupling multiple length scales of the primary mode. This formulation, based on two-dimensional stability analysis coupled with a Bloch waves formalism originally described in Schmid et al. (2017), allows to consider high-dimensional systems resulting from several repetitions of a periodic unit, by solving an eigenproblem of much smaller size. Collective instabilities coupling multiple periodic units can be thus retrieved. The method is applied on the secondary stability of a swept boundary-layer flow subject to stationary cross-flow vortices, and compared with Floquet analysis. Two multi-modal instabilities are recovered: for streamwise wavenumber $α_v$ close to zero, approximately twelve sub-units are involved in large-wavelength oscillations; whereas a staggered pattern, characteristic of subharmonic instabilities, is observed for $α_v = 0.087$.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Nanobeacon: A time calibration device for the KM3NeT neutrino telescope
Authors:
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
M. Anguita,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
F. Benfenati,
E. Berbee,
A. M. van den Berg,
V. Bertine,
S. Biagi,
M. Boettcher,
M. Bou Cabo
, et al. (216 additional authors not shown)
Abstract:
The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric ne…
▽ More
The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric neutrinos. Both extraterrestrial and atmospheric neutrinos are detected through the Cherenkov light induced in seawater by charged particles produced in neutrino interactions in the surrounding medium. A relative time synchronization between photomultipliers of the order of 1 ns is needed to guarantee the required angular resolution of the detector. Due to the large detector volumes to be instrumented by KM3NeT, a cost reduction of the different systems is a priority. To this end, the inexpensive Nanobeacon has been designed and developed by the KM3NeT Collaboration to be used for detector time-calibration studies. At present, more than 600 Nanobeacons have been already produced. The characterization of the optical pulse and the wavelength emission profile of the devices are critical for the time calibration. In this paper, the main features of the Nanobeacon design, production and operation, together with the main properties of the light pulse generated are described.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Linear and nonlinear optimal growth mechanisms for generating turbulent bands
Authors:
E. Parente,
J-Ch. Robinet,
P. De Palma,
S. Cherubini
Abstract:
Linear and nonlinear energy optimizations in a tilted domain are used to unveil the main mechanisms allowing the creation of a turbulent band in a channel flow. Linear optimization predicts an optimal growth for streamwse and spanwise wavenumbers $k_x = 1.2$, $k_z = - 1.75$, corresponding to the peak values of the premultiplied energy spectra of direct numerical simulations. At target time, the li…
▽ More
Linear and nonlinear energy optimizations in a tilted domain are used to unveil the main mechanisms allowing the creation of a turbulent band in a channel flow. Linear optimization predicts an optimal growth for streamwse and spanwise wavenumbers $k_x = 1.2$, $k_z = - 1.75$, corresponding to the peak values of the premultiplied energy spectra of direct numerical simulations. At target time, the linear optimal perturbation is composed by oblique streaks, which, for a sufficiently large initial energy, induce turbulence in the whole domain, due to the lack of spatial localization. When localization is achieved by adding nonlinear effects to the optimization, or by artificially confining the linear optimal to a localized region in the spanwise direction, a large-scale flow is created, which leads to the generation of a localised turbulent band. These results suggest that inducing transition towards turbulent bands in a tilted domain, two main elements are needed: a linear energy growth mechanism such as the lift-up for generating large-amplitude flow structures which produce inflection points; large-scale vortices ensuring spatial localisation. Remarkably, these two elements alone are able to generate an isolated turbulent band also in a large, non-tilted domain.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
Minimal seeds for turbulent bands
Authors:
E. Parente,
J-Ch. Robinet,
P. De Palma,
S. Cherubini
Abstract:
In this work, nonlinear variational optimization is used for obtaining minimal seeds for the formation of turbulent bands in channel flow. Using nonlinear optimization together with energy bisection, we have found that the minimal energy threshold for obtaining spatially-patterned turbulence scales with $Re^{-8.5}$ for $Re>1000$. The minimal seed is constituted by a localized spot-like structure s…
▽ More
In this work, nonlinear variational optimization is used for obtaining minimal seeds for the formation of turbulent bands in channel flow. Using nonlinear optimization together with energy bisection, we have found that the minimal energy threshold for obtaining spatially-patterned turbulence scales with $Re^{-8.5}$ for $Re>1000$. The minimal seed is constituted by a localized spot-like structure surrounded by a low-amplitude large-scale quadrupolar structure filling the whole domain. This minimal-energy perturbation of the laminar flow has dominant wavenumbers equal to $0.15$ and $4$ in the streamwise and spanwise directions, respectively, and is characterized by a more marked spatial localization when the Reynolds number increases. At $Re \lesssim 1200$, the minimal seed evolves in time creating an isolated oblique band. Whereas, for $Re\gtrsim 1200$, an almost spanwise-symmetric evolution is observed, giving rise to two distinct bands. A similar evolution is found also at low $Re$ for non-minimal optimal perturbations. This highlights two different mechanisms of formation of turbulent bands in channel flow, depending on the Reynolds number and initial energy of the perturbation. The selection of one of these two mechanisms appears to be affected by the probability of decay of the newly-created stripe, which increases with time, but decreases with the Reynolds number.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
Coded masks for imaging of neutrino events
Authors:
M. Andreotti,
P. Bernardini,
A. Bersani,
S. Bertolucci,
S. Biagi,
A. Branca,
C. Brizzolari,
G. Brunetti,
I. Cagnoli,
R. Calabrese,
A. Caminata,
A. Campani,
P. Carniti,
R. Cataldo,
C. Cattadori,
S. Cherubini,
V. Cicero,
M. Citterio,
S. Copello,
P. Cova,
E. Cristaldo Morales,
S. Davini,
N. Delmonte,
G. De Matteis,
S. Di Domizio
, et al. (54 additional authors not shown)
Abstract:
The capture of scintillation light emitted by liquid Argon and Xenon under molecular excitations by charged particles is still a challenging task. Here we present a first attempt to design a device able to grab sufficiently high luminosity in order to reconstruct the path of ionizing particles. This preliminary study is based on the use of masks to encode the light signal combined with single-phot…
▽ More
The capture of scintillation light emitted by liquid Argon and Xenon under molecular excitations by charged particles is still a challenging task. Here we present a first attempt to design a device able to grab sufficiently high luminosity in order to reconstruct the path of ionizing particles. This preliminary study is based on the use of masks to encode the light signal combined with single-photon detectors. In this respect, the proposed system is able to detect tracks over focal distances of about tens of centimeters. From numerical simulations it emerges that it is possible to successfully decode and recognize signals, even complex, with a relatively limited number of acquisition channels. Such innovative technique can be very fruitful in a new generation of detectors devoted to neutrino physics and dark matter search. Indeed the introduction of coded masks combined with SiPM detectors is proposed for a liquid-Argon target in the Near Detector of the DUNE experiment.
△ Less
Submitted 21 November, 2021; v1 submitted 22 May, 2021;
originally announced May 2021.
-
Event reconstruction for KM3NeT/ORCA using convolutional neural networks
Authors:
Sebastiano Aiello,
Arnauld Albert,
Sergio Alves Garre,
Zineb Aly,
Fabrizio Ameli,
Michel Andre,
Giorgos Androulakis,
Marco Anghinolfi,
Mancia Anguita,
Gisela Anton,
Miquel Ardid,
Julien Aublin,
Christos Bagatelas,
Giancarlo Barbarino,
Bruny Baret,
Suzan Basegmez du Pree,
Meriem Bendahman,
Edward Berbee,
Vincent Bertin,
Simone Biagi,
Andrea Biagioni,
Matthias Bissinger,
Markus Boettcher,
Jihad Boumaaza,
Mohammed Bouta
, et al. (207 additional authors not shown)
Abstract:
The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neur…
▽ More
The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Dependence of atmospheric muon flux on seawater depth measured with the first KM3NeT detection units
Authors:
KM3NeT Collaboration,
M. Ageron,
S. Aiello,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
J. Aublin,
C. Bagatelas,
G. Barbarino,
B. Baret,
S. Basegmez du Pree,
A. Belias,
E. Berbee,
A. M. van den Berg,
V. Bertin,
V. van Beveren,
S. Biagi,
A. Biagioni,
S. Bianucci,
M. Billault,
M. Bissinger,
R. de Boer
, et al. (240 additional authors not shown)
Abstract:
KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV-PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The fir…
▽ More
KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV-PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The first KM3NeT detection units were deployed at the Italian and French sites between 2015 and 2017. In this paper, a description of the detector is presented, together with a summary of the procedures used to calibrate the detector in-situ. Finally, the measurement of the atmospheric muon flux between 2232-3386 m seawater depth is obtained.
△ Less
Submitted 4 February, 2020; v1 submitted 6 June, 2019;
originally announced June 2019.
-
Time-stepping and Krylov methods for large-scale instability problems
Authors:
Jean-Christophe Loiseau,
Michele Alessandro Bucci,
Stefania Cherubini,
Jean-Christophe Robinet
Abstract:
With the ever increasing computational power available and the development of high-performances computing, investigating the properties of realistic very large-scale nonlinear dynamical systems has been become reachable. It must be noted however that the memory capabilities of computers increase at a slower rate than their computational capabilities. Consequently, the traditional matrix-forming ap…
▽ More
With the ever increasing computational power available and the development of high-performances computing, investigating the properties of realistic very large-scale nonlinear dynamical systems has been become reachable. It must be noted however that the memory capabilities of computers increase at a slower rate than their computational capabilities. Consequently, the traditional matrix-forming approaches wherein the Jacobian matrix of the system considered is explicitly assembled become rapidly intractable. Over the past two decades, so-called matrix-free approaches have emerged as an efficient alternative. The aim of this chapter is thus to provide an overview of well-grounded matrix-free methods for fixed points computations and linear stability analyses of very large-scale nonlinear dynamical systems.
△ Less
Submitted 11 April, 2018;
originally announced April 2018.
-
Intrinsic limits on resolutions in muon- and electron-neutrino charged-current events in the KM3NeT/ORCA detector
Authors:
S. Adrián-Martínez,
M. Ageron,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
T. Avgitas,
G. Barbarino,
E. Barbarito,
B. Baret,
J. Barrios-Martí,
A. Belias,
E. Berbee,
A. van den Berg,
V. Bertin,
S. Beurthey,
V. van Beveren,
N. Beverini,
S. Biagi,
A. Biagioni
, et al. (228 additional authors not shown)
Abstract:
Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA…
▽ More
Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA detector are investigated. These processes include the composition of the hadronic fragmentation products, the subsequent particle propagation and the photon-sampling fraction of the detector. GEANT simulations of neutrino interactions in seawater produced by GENIE are used to study the effects in the 1 - 20 GeV range. It is found that fluctuations in the hadronic cascade in conjunction with the variation of the inelasticity y are most detrimental to the resolutions. The effect of limited photon sampling in the detector is of significantly less importance. These results will therefore also be applicable to similar detectors/media, such as those in ice.
△ Less
Submitted 19 May, 2017; v1 submitted 29 November, 2016;
originally announced December 2016.
-
Letter of Intent for KM3NeT 2.0
Authors:
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. Anassontzis,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
T. Avgitas,
G. Barbarino,
E. Barbarito,
B. Baret,
J. Barrios-Martí,
B. Belhorma,
A. Belias,
E. Berbee,
A. van den Berg,
V. Bertin,
S. Beurthey,
V. van Beveren,
N. Beverini
, et al. (222 additional authors not shown)
Abstract:
The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of elect…
▽ More
The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of electron neutrinos to the third neutrino mass eigenstate as reported by Daya Bay, Reno and others. To meet these objectives, the KM3NeT Collaboration plans to build a new Research Infrastructure consisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea. A phased and distributed implementation is pursued which maximises the access to regional funds, the availability of human resources and the synergetic opportunities for the earth and sea sciences community. Three suitable deep-sea sites are identified, namely off-shore Toulon (France), Capo Passero (Italy) and Pylos (Greece). The infrastructure will consist of three so-called building blocks. A building block comprises 115 strings, each string comprises 18 optical modules and each optical module comprises 31 photo-multiplier tubes. Each building block thus constitutes a 3-dimensional array of photo sensors that can be used to detect the Cherenkov light produced by relativistic particles emerging from neutrino interactions. Two building blocks will be configured to fully explore the IceCube signal with different methodology, improved resolution and complementary field of view, including the Galactic plane. One building block will be configured to precisely measure atmospheric neutrino oscillations.
△ Less
Submitted 26 July, 2016; v1 submitted 27 January, 2016;
originally announced January 2016.
