Showing 1–50 of 1,737 results for author: Chen, Y

Non-Fermi liquid and antiferromagnetic correlations with hole doping in the bilayer two-orbital Hubbard model of La$_3$Ni$_2$O$_7$ at zero temperature

Authors: Yin Chen, Yi-Heng Tian, Jia-Ming Wang, Rong-Qiang He, Zhong-Yi Lu

Abstract: High-$T_c$ superconductivity (SC) was recently found in the bilayer material La$_3$Ni$_2$O$_7$ (La327) under high pressures. We study the bilayer two-orbital Hubbard model derived from the band structure of the La327. The model is solved by cluster dynamical mean-field theory (CDMFT) with natural orbitals renormalization group (NORG) as impurity solver at zero temperature, considering only normal… ▽ More High-$T_c$ superconductivity (SC) was recently found in the bilayer material La$_3$Ni$_2$O$_7$ (La327) under high pressures. We study the bilayer two-orbital Hubbard model derived from the band structure of the La327. The model is solved by cluster dynamical mean-field theory (CDMFT) with natural orbitals renormalization group (NORG) as impurity solver at zero temperature, considering only normal states. With hole doping, we have observed sequentially the Mott insulator (Mott), pseudogap (PG), non-Fermi liquid (NFL), and Fermi liquid (FL) phases, with quantum correlations decreasing. The ground state of the La327 is in the NFL phase with Hund spin correlation, which transmits the Ni-$3d_{z^2}$ ($z$) orbital inter-layer AFM correlation to the Ni-$3d_{x^2-y^2}$ orbitals. When the $σ$-bonding state of the $z$ orbitals ($z+$) is no longer fully filled, the inter-layer antiferromagnetic (AFM) correlations weaken rapidly. At low pressures, the fully filled $z+$ band supports a strong inter-layer AFM correlations, potentially favoring short-range spin density wave (SDW) and suppressing SC. Hole doping at low pressures may achieve a similar effect to high pressures, under which the $z+$ band intersects with the Fermi level, and consequently the spin correlations weaken remarkably, potentially suppressing the possible short-range SDW and favoring SC. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Comments: 8 pages, 9 figures

Design, fabrication and testing of Al/p-Si Schottky and pn junctions for radiation studies

Authors: E. Giulio Villani, Dengfeng Zhang, Adnan Malik, Trevor Vickey, Yebo Chen, Matthew G. Kurth, Peilian Liu, Hongbo Zhu, Thomas Koffas, Christoph Thomas Klein, Robert Vandusen, Rodney Aiton, Angela Mccormick, Garry Tarr

Abstract: Strip and pixels sensors, fabricated on high resistivity silicon substrate, normally of p-type, are used in detectors for High Energy Physics (HEP) typically in a hybrid detector assembly. Furthermore, and owing to their inherent advantages over hybrid sensors, Monolithic Active Pixel Sensors (MAPS) fabricated in CMOS technology have been increasingly implemented in HEP experiments. In all cases,… ▽ More Strip and pixels sensors, fabricated on high resistivity silicon substrate, normally of p-type, are used in detectors for High Energy Physics (HEP) typically in a hybrid detector assembly. Furthermore, and owing to their inherent advantages over hybrid sensors, Monolithic Active Pixel Sensors (MAPS) fabricated in CMOS technology have been increasingly implemented in HEP experiments. In all cases, their use in higher radiation areas (HL-LHC and beyond) will require options to improve their radiation hardness and time resolution. These aspects demand a deep understanding of their radiation damage and reliable models to predict their behaviours at high fluences. As a first step, we fabricated several Schottky and n-on-p diodes, to allow a comparison of results and provide a backup solution for test devices, on 6 or 4-inch p-type silicon wafers with 50 μm epitaxial thickness and of doping concentration as they are normally used in HEP detectors and CMOS MAPS devices. In this paper, details of the design and fabrication process, along with test results of the fabricated devices before irradiation, will be provided. Additional test results on irradiated devices will be provided in subsequent publications. △ Less

Submitted 26 June, 2024; originally announced July 2024.

Efficient condensation on spiked surfaces with superhydrophobic and superhydrophilic coatings

Authors: Kai-Xin Hu, Yin-Jiang Chen, Bin-Wei Tang

Abstract: Steam condensation on the surface of a solid is a widely observed mode of energy transfer in nature and various industrial applications. The condensation efficiency is closely related to the material properties and geometric morphology of the solid surface, as well as the method of liquid removal. Despite many surface modification strategies at the micro and nano levels having been employed to enh… ▽ More Steam condensation on the surface of a solid is a widely observed mode of energy transfer in nature and various industrial applications. The condensation efficiency is closely related to the material properties and geometric morphology of the solid surface, as well as the method of liquid removal. Despite many surface modification strategies at the micro and nano levels having been employed to enhance steam condensation, understanding how to regulate steam condensation and liquid removal on complex surface morphologies remains incomplete. Here, we report a method that uses superhydrophilic and superhydrophobic coatings as well as spiked surfaces to achieve efficient steam condensation and rapid removal of the liquid. We reveal that on a copper plate with millimeter-scale spikes, hydrophobic spiked surfaces facilitate the dropwise condensation, while hydrophilic bottom grooves promote liquid spreading, and the suction in capillary gaps can promptly remove the condensate liquid. This method achieves a high condensation efficiency without relying on gravity. Additionally, we demonstrate that the condensation on spiked surfaces has a significant suction effect, as it continuously attracts the steam flow, thereby altering the flow direction. This finding provides a new approach for efficient steam condensation technology and opens up a promising pathway for providing circulation power and improving condensation efficiency in phase-change heat transfer devices such as heat pipes. △ Less

Submitted 16 July, 2024; originally announced July 2024.

Harnessing an elastic flow instability to improve the kinetic performance of chromatographic columns

Authors: Fabrice Gritti, Emily Y. Chen, Sujit S. Datta

Abstract: Despite decades of research and development, the optimal efficiency of slurry-packed HPLC columns is still hindered by inherent long-range flow heterogeneity from the wall to the central bulk region of these columns. Here, we show an example of how this issue can be addressed through the straightforward addition of a semidilute amount (500~ppm) of a large, flexible, synthetic polymer (18~MDa parti… ▽ More Despite decades of research and development, the optimal efficiency of slurry-packed HPLC columns is still hindered by inherent long-range flow heterogeneity from the wall to the central bulk region of these columns. Here, we show an example of how this issue can be addressed through the straightforward addition of a semidilute amount (500~ppm) of a large, flexible, synthetic polymer (18~MDa partially hydrolyzed polyacrylamide, HPAM) to the mobile phase (1\% NaCl aqueous solution) during operation of a 4.6 mm $\times$ 300 mm column packed with 10~$μ$m BEH$^{\mathrm{TM}}$ 125~Å\ Particles. Addition of the polymer imparts elasticity to the mobile phase, causing the flow in the interparticle pore space to become unstable above a threshold flow rate. We verify the development of this elastic flow instability using pressure drop measurements of the friction factor versus Reynolds number. In prior work, we showed that this flow instability is characterized by large spatiotemporal fluctuations in the pore-scale flow velocities that may promote analyte dispersion across the column. Axial dispersion measurements of the quasi non-retained tracer thiourea confirm this possibility: they unequivocally reveal that operating above the onset of the instability improves column efficiency by significantly reducing peak asymmetry. These experiments thereby provide a proof-of-concept demonstration that elastic flow instabilities can be harnessed to mitigate the negative impact of trans-column flow heterogeneities on the efficiency of slurry-packed HPLC columns. While this approach has its own inherent limitations and constraints, our work lays the groundwork for future targeted development of polymers that can impart elasticity when dissolved in commonly used liquid chromatography mobile phases, and can thereby generate elastic flow instabilities to help improve the resolution of HPLC columns. △ Less

Submitted 15 July, 2024; originally announced July 2024.

Supernova Pointing Capabilities of DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr… ▽ More The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Comments: 25 pages, 16 figures

Report number: FERMILAB-PUB-24-0319-LBNF

Predictability of weakly turbulent systems from spatially sparse observations using data assimilation and machine learning

Authors: Vikrant Gupta, Yuanqing Chen, Minping Wan

Abstract: We apply two data assimilation (DA) methods, a smoother and a filter, and a model-free machine learning (ML) shallow network to forecast two weakly turbulent systems. We analyse the effect of the spatial sparsity of observations on accuracy of the predictions obtained from these data-driven methods. Based on the results, we divide the spatial sparsity levels in three zones. First is the good-predi… ▽ More We apply two data assimilation (DA) methods, a smoother and a filter, and a model-free machine learning (ML) shallow network to forecast two weakly turbulent systems. We analyse the effect of the spatial sparsity of observations on accuracy of the predictions obtained from these data-driven methods. Based on the results, we divide the spatial sparsity levels in three zones. First is the good-predictions zone in which both DA and ML methods work. We find that in the good-predictions zone the observations remain dense enough to accurately capture the fractal manifold of the system's dynamics, which is measured using the correlation dimension. The accuracy of the DA methods in this zone remains almost as good as for full-resolution observations. Second is the reasonable-predictions zone in which the DA methods still work but at reduced prediction accuracy. Third is the bad-predictions zone in which even the DA methods fail. We find that the sparsity level up to which the DA methods work is almost the same up to which chaos synchronisation of these systems can be achieved. The main implications of these results are that they (i) firmly establish the spatial resolution up to which the data-driven methods can be utilised, (ii) provide measures to determine if adding more sensors will improve the predictions, and (iii) quantify the advantage (in terms of the required measurement resolution) of using the governing equations within data-driven methods. We also discuss the applicability of these results to fully developed turbulence. △ Less

Submitted 14 July, 2024; originally announced July 2024.

> 2π Phase Modulation using Exciton-Polaritons in a Two-Dimensional Superlattice

Authors: Jason Lynch, Pawan Kumar, Chen Chen, Nicholas Trainor, Shalini Kumari, Tzu-Yu Peng, Cindy Yueli Chen, Yu-Jung Lu, Joan Redwing, Deep Jariwala

Abstract: Active metamaterials promise to enable arbitrary, temporal control over the propagation of wavefronts of light for applications such as beam steering, optical communication modulators, and holograms. This has been done in the past using patterned silicon photonics to locally control the phase of light such that the metasurface acts as a large number of wavelets. Although phase modulation only requ… ▽ More Active metamaterials promise to enable arbitrary, temporal control over the propagation of wavefronts of light for applications such as beam steering, optical communication modulators, and holograms. This has been done in the past using patterned silicon photonics to locally control the phase of light such that the metasurface acts as a large number of wavelets. Although phase modulation only requires refractive index modulation when the interaction length is on the order of the wavelength, this is not enough to significantly modulate the phase of light in flatland. Instead, phase modulation is achieved using a resonant mode such as a plasmon or high-Q cavity mode that enable light to accumulate a large amount of phase over a short distance and coupling it to an active material that modulates the light-matter interactions. Here, we report that electrostatic doping can modulate the light-matter interaction strength of a two-dimensional WS2 based multi quantum well (MQW) structure going from strongly-coupled, phase-accumulating exciton-polaritons to weakly-coupled exciton-trion-polaritons. As a result of this transition, 2.02π radians of phase modulation is observed using spectroscopic ellipsometry. This result demonstrates the potential of the MQW structure as a compact, lightweight electro-optical modulators for LiDAR and optical communications in the red region of visible spectrum. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Physical encryption and decryption for secure data transmission in optical networks leveraging the temporal Talbot effect and microwave photonics

Authors: Chulun Lin, Taixia Shi, Yiqing Liu, Yang Chen

Abstract: A novel microwave photonic scheme for secure data transmission in optical networks is proposed. The security of the scheme is guaranteed by physical encryption and decryption via the temporal Talbot effect in dispersive mediums. First, the original data is randomized in the digital domain by performing an exclusive OR operation using a random matrix. Subsequently, a time-varying multi-tone electri… ▽ More A novel microwave photonic scheme for secure data transmission in optical networks is proposed. The security of the scheme is guaranteed by physical encryption and decryption via the temporal Talbot effect in dispersive mediums. First, the original data is randomized in the digital domain by performing an exclusive OR operation using a random matrix. Subsequently, a time-varying multi-tone electrical signal, which represents the randomized data matrix, is modulated onto an optical carrier. The optical signal after modulation is then phase-modulated by a temporal Talbot array illuminator (TAI) signal, and the optical signal after discrete quadratic phase modulation will lose its original appearance in the frequency domain and be further dispersed in the first dispersive medium. Due to the dispersion that does not match the TAI signal exactly, the waveform after the first dispersive medium is a noise-like signal. Hence, the physical encryption of the original data is successfully achieved. As the optical signal passes a second dispersive medium that makes the total dispersion match the TAI signal, the temporal waveform of the noise-like signal after photodetection is transformed into pulses. "1" and "0" in the randomized data matrix are represented through the presence and absence of pulses, and the physical decryption is achieved. By further processing the recovered data matrix using the random matrix, the original data can be recovered. The physical layer security of the proposed scheme and its fiber transmission capability are demonstrated. 8-Gbit/s data is transmitted, encrypted, and decrypted using two dispersive mediums and an optical fiber of 10 to 200 km, and error-free transmission is achieved. Many factors that affect the encryption, decryption, and transmission performance of the system have been analyzed. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Comments: 19 pages, 15 figures, 1 table

High power GaSb-based distributed feedback laser with laterally coupled dielectric gratings at 1.95μm

Authors: Zhengqing Ding, Juntian Cao, Kun Zhan, Yihang Chen, Lidan Zhou, Hao Tan, Chenao Yang, Ying Yu, Zhichuan Niu, Siyuan Yu

Abstract: Traditional Distributed Feedback (DFB) or Distributed Bragg Reflector (DBR) lasers typically utilize buried gratings as frequency-selective optical feedback mechanisms. However, the fabrication of such gratings often necessitates regrowth processes, which can pose technical challenges for materials platforms such as GaAs and GaSb. Metal gratings were also used for GaSb lasers but they introduce ad… ▽ More Traditional Distributed Feedback (DFB) or Distributed Bragg Reflector (DBR) lasers typically utilize buried gratings as frequency-selective optical feedback mechanisms. However, the fabrication of such gratings often necessitates regrowth processes, which can pose technical challenges for materials platforms such as GaAs and GaSb. Metal gratings were also used for GaSb lasers but they introduce additional absorption loss that limits device efficiency and output power. In this paper, we introduce a novel laterally coupled dielectric Bragg grating structure, which enables highly controllable, deterministic, and stable coupling between the grating and the optical mode. Our device demonstrates a continuous-wave output power of 47.02 mW at room temperature, exhibiting stable single-mode operation from 300-1000 mA and achieving a maximum side mode suppression ratio of 46.7 dB. These results underscore the innovative lateral coupled dielectric grating as a feasible and technologically superior approach for fabricating DFB and DBR lasers, which hold universal applicability across different material platforms and wavelength bands. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 9 pages, 7 figures, 1 table

MSC Class: 78A60 ACM Class: J.2.6

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Leveraging Data Mining, Active Learning, and Domain Adaptation in a Multi-Stage, Machine Learning-Driven Approach for the Efficient Discovery of Advanced Acidic Oxygen Evolution Electrocatalysts

Authors: Rui Ding, Jianguo Liu, Kang Hua, Xuebin Wang, Xiaoben Zhang, Minhua Shao, Yuxin Chen, Junhong Chen

Abstract: Developing advanced catalysts for acidic oxygen evolution reaction (OER) is crucial for sustainable hydrogen production. This study introduces a novel, multi-stage machine learning (ML) approach to streamline the discovery and optimization of complex multi-metallic catalysts. Our method integrates data mining, active learning, and domain adaptation throughout the materials discovery process. Unlik… ▽ More Developing advanced catalysts for acidic oxygen evolution reaction (OER) is crucial for sustainable hydrogen production. This study introduces a novel, multi-stage machine learning (ML) approach to streamline the discovery and optimization of complex multi-metallic catalysts. Our method integrates data mining, active learning, and domain adaptation throughout the materials discovery process. Unlike traditional trial-and-error methods, this approach systematically narrows the exploration space using domain knowledge with minimized reliance on subjective intuition. Then the active learning module efficiently refines element composition and synthesis conditions through iterative experimental feedback. The process culminated in the discovery of a promising Ru-Mn-Ca-Pr oxide catalyst. Our workflow also enhances theoretical simulations with domain adaptation strategy, providing deeper mechanistic insights aligned with experimental findings. By leveraging diverse data sources and multiple ML strategies, we establish an efficient pathway for electrocatalyst discovery and optimization. This comprehensive, data-driven approach represents a paradigm shift and potentially new benchmark in electrocatalysts research. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Comments: 95 pages (main text 37 pages; supplementary materials 58 pages); 38 figures (main text 6 figures; supplementary materials 32 figures)

Out-of-Plane Polarization from Spin Reflection Induces Field-Free Spin-Orbit Torque Switching in Structures with Canted NiO Interfacial Moments

Authors: Zhe Zhang, Zhuoyi Li, Yuzhe Chen, Fangyuan Zhu, Yu Yan, Yao Li, Liang He, Jun Du, Rong Zhang, Jing Wu, Xianyang Lu, Yongbing Xu

Abstract: Realizing deterministic current-induced spin-orbit torque (SOT) magnetization switching, especially in systems exhibiting perpendicular magnetic anisotropy (PMA), typically requires the application of a collinear in-plane field, posing a challenging problem. In this study, we successfully achieve field-free SOT switching in the CoFeB/MgO system. In a Ta/CoFeB/MgO/NiO/Ta structure, spin reflection… ▽ More Realizing deterministic current-induced spin-orbit torque (SOT) magnetization switching, especially in systems exhibiting perpendicular magnetic anisotropy (PMA), typically requires the application of a collinear in-plane field, posing a challenging problem. In this study, we successfully achieve field-free SOT switching in the CoFeB/MgO system. In a Ta/CoFeB/MgO/NiO/Ta structure, spin reflection at the NiO interface, characterized by noncollinear spin structures with canted magnetization, generates a spin current with an out-of-plane spin polarization σz. We confirm the contribution of σz to the field-free SOT switching through measurements of the shift effect in the out-of-plane magnetization hysteresis loops under different currents. The incorporation of NiO as an antiferromagnetic insulator, mitigates the current shunting effect and ensures excellent thermal stability of the device. The sample with 0.8 nm MgO and 2 nm NiO demonstrates an impressive optimal switching ratio approaching 100% without an in-plane field. This breakthrough in the CoFeB/MgO system promises significant applications in spintronics, advancing us closer to realizing innovative technologies. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Learning data efficient coarse-grained molecular dynamics from forces and noise

Authors: Aleksander E. P. Durumeric, Yaoyi Chen, Frank Noé, Cecilia Clementi

Abstract: Machine-learned coarse-grained (MLCG) molecular dynamics is a promising option for modeling biomolecules. However, MLCG models currently require large amounts of data from reference atomistic molecular dynamics or substantial computation for training. Denoising score matching -- the technology behind the widely popular diffusion models -- has simultaneously emerged as a machine-learning framework… ▽ More Machine-learned coarse-grained (MLCG) molecular dynamics is a promising option for modeling biomolecules. However, MLCG models currently require large amounts of data from reference atomistic molecular dynamics or substantial computation for training. Denoising score matching -- the technology behind the widely popular diffusion models -- has simultaneously emerged as a machine-learning framework for creating samples from noise. Models in the first category are often trained using atomistic forces, while those in the second category extract the data distribution by reverting noise-based corruption. We unify these approaches to improve the training of MLCG force-fields, reducing data requirements by a factor of 100 while maintaining advantages typical to force-based parameterization. The methods are demonstrated on proteins Trp-Cage and NTL9 and published as open-source code. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: 25 pages, 8 figures

Influence of fluid rheology on multistability in the unstable flow of polymer solutions through pore constriction arrays

Authors: Emily Y. Chen, Sujit S. Datta

Abstract: Diverse chemical, energy, environmental, and industrial processes involve the flow of polymer solutions in porous media. The accumulation and dissipation of elastic stresses as the polymers are transported through the tortuous, confined pore space can lead to the development of an elastic flow instability above a threshold flow rate. This flow instability can generate complex flows with strong spa… ▽ More Diverse chemical, energy, environmental, and industrial processes involve the flow of polymer solutions in porous media. The accumulation and dissipation of elastic stresses as the polymers are transported through the tortuous, confined pore space can lead to the development of an elastic flow instability above a threshold flow rate. This flow instability can generate complex flows with strong spatiotemporal fluctuations, despite the low Reynolds number ($\mathrm{Re} \ll 1$); for example, in 1D ordered arrays of pore constrictions, this unstable flow can be multistable, with distinct pores exhibiting distinct unstable flow states. Here, we examine how this multistability is influenced by fluid rheology. Through experiments using diverse polymer solutions having systematic variations in fluid shear-thinning or elasticity, in pore constriction arrays of varying geometries, we show that the onset of multistability can be described using a single dimensionless parameter. This parameter, the streamwise Deborah number, compares the stress relaxation time of the polymer solution to the time required for the fluid to be advected between pore constrictions. Our work thus helps to deepen understanding of the influence of fluid rheology on elastic instabilities, helping to establish guidelines for the rational design of polymeric fluids with desirable flow behaviors. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Pseudo grid-based physics-informed convolutional-recurrent network solving the integrable nonlinear lattice equations

Authors: Zhe Lin, Yong Chen

Abstract: Traditional discrete learning methods involve discretizing continuous equations using difference schemes, necessitating considerations of stability and convergence. Integrable nonlinear lattice equations possess a profound mathematical structure that enables them to revert to continuous integrable equations in the continuous limit, particularly retaining integrable properties such as conservation… ▽ More Traditional discrete learning methods involve discretizing continuous equations using difference schemes, necessitating considerations of stability and convergence. Integrable nonlinear lattice equations possess a profound mathematical structure that enables them to revert to continuous integrable equations in the continuous limit, particularly retaining integrable properties such as conservation laws, Hamiltonian structure, and multiple soliton solutions. The pseudo grid-based physics-informed convolutional-recurrent network (PG-PhyCRNet) is proposed to investigate the localized wave solutions of integrable lattice equations, which significantly enhances the model's extrapolation capability to lattice points beyond the temporal domain. We conduct a comparative analysis of PG-PhyCRNet with and without pseudo grid by investigating the multi-soliton solutions and rational solitons of the Toda lattice and self-dual network equation. The results indicate that the PG-PhyCRNet excels in capturing long-term evolution and enhances the model's extrapolation capability for solitons, particularly those with steep waveforms and high wave speeds. Finally, the robustness of the PG-PhyCRNet method and its effect on the prediction of solutions in different scenarios are confirmed through repeated experiments involving pseudo grid partitioning. △ Less

Submitted 25 June, 2024; originally announced July 2024.

Cascaded multi-phonon stimulated Raman scattering near second-harmonic-generation in thin-film lithium niobate microdisk

Authors: Yuxuan He, Xiongshuo Yan, Jiangwei Wu, Xiangmin Liu, Yuping Chen, Xianfeng Chen

Abstract: High-quality microresonators can greatly enhance light-matter interactions and are excellent platforms for studying nonlinear optics. Wavelength conversion through nonlinear processes is the key to many applications of integrated optics. The stimulated Raman scattering process can extend the emission wavelength of a laser source to a wider range. Lithium niobate, as a Raman active crystalline mate… ▽ More High-quality microresonators can greatly enhance light-matter interactions and are excellent platforms for studying nonlinear optics. Wavelength conversion through nonlinear processes is the key to many applications of integrated optics. The stimulated Raman scattering process can extend the emission wavelength of a laser source to a wider range. Lithium niobate, as a Raman active crystalline material, has remarkable potential for wavelength conversion. Here, we demonstrate the generation of cascaded multi-phonon Raman signals near the second-harmonic-generation peak in X-cut thin-film lithium niobate microdisk. Fine tuning of the specific cascaded Raman spectral lines has also been made by changing the pump wavelength. Raman lines can reach wavelength up to about 80 nm away from the SHG signal. We realize the SFG process associated with Raman signals in the visible range as well. Our work extends the use of WGM microresonators as effective optical upconversion wavelength converters in nonlinear optical applications. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Generation of spatiotemporal acoustic vortices with arbitrarily oriented orbital angular momentum

Authors: Shuai Liu, Hao Ge, Xiang-Yuan Xu, Yuan Sun, Xiao-Ping Liu, Ming-Hui Lu, Yan-Feng Chen

Abstract: Despite extensive exploration of acoustic vortices carrying orbital angular momentum (OAM), the generation of acoustic vortices with OAM orientations beyond the conventional longitudinal direction remains largely unexplored. Spatiotemporal (ST) vortices, featuring spiral phase twisting in the ST domain and carrying transverse OAM, have recently attracted considerable interest in optics and acousti… ▽ More Despite extensive exploration of acoustic vortices carrying orbital angular momentum (OAM), the generation of acoustic vortices with OAM orientations beyond the conventional longitudinal direction remains largely unexplored. Spatiotemporal (ST) vortices, featuring spiral phase twisting in the ST domain and carrying transverse OAM, have recently attracted considerable interest in optics and acoustics. Here, we report the generation of three-dimensional (3D) ST acoustic vortices with arbitrarily oriented OAM, thereby opening up a new dimension in acoustic OAM control. By utilizing a two-dimensional (2D) acoustic phased array, we introduce two approaches to manipulate the orientation of OAM: through the direct rotation of vortices in 3D space and the intersection of vortices carrying distinct types of OAM. These methods enable unprecedented control over the orientation of acoustic OAM, providing a new degree of freedom in the manipulation of acoustic waves. The arbitrarily oriented OAM holds promise for enhancing acoustic communication by broadening capacity and enabling more complex particle manipulation techniques. Our work establishes a foundation for future explorations into the complex dynamics of novel structured acoustic fields in the ST domain. △ Less

Submitted 26 June, 2024; originally announced June 2024.

A response to commenter Ke Lan's comment on our paper published in Nature Communications (2023)14:5782 by J. Yan et al

Authors: Ji Yan, Jiwei Li, X. T. He, Lifeng Wang, Yaohua Chen, Feng Wang, Xiaoying Han, Kaiqiang Pan, Juxi Liang, Yulong Li, Zanyang Guan, Xiangming Liu, Xingsen Che, Zhongjing Chen, Xing Zhang, Yan Xu, Bin Li, Minging He, Hongbo Cai, Liang. Hao, Zhanjun Liu, Chunyang Zheng, Zhensheng Dai, Zhengfeng Fan, Bin Qiao , et al. (4 additional authors not shown)

Abstract: A response to commenter Ke Lan's comment on our paper published in Nature Communications (2023)14:5782 by J. Yan et al A response to commenter Ke Lan's comment on our paper published in Nature Communications (2023)14:5782 by J. Yan et al △ Less

Submitted 25 June, 2024; originally announced June 2024.

Automated radiotherapy treatment planning guided by GPT-4Vision

Authors: Sheng Liu, Oscar Pastor-Serrano, Yizheng Chen, Matthew Gopaulchan, Weixing Liang, Mark Buyyounouski, Erqi Pollom, Quynh-Thu Le, Michael Gensheimer, Peng Dong, Yong Yang, James Zou, Lei Xing

Abstract: Radiotherapy treatment planning is a time-consuming and potentially subjective process that requires the iterative adjustment of model parameters to balance multiple conflicting objectives. Recent advancements in large foundation models offer promising avenues for addressing the challenges in planning and clinical decision-making. This study introduces GPT-RadPlan, a fully automated treatment plan… ▽ More Radiotherapy treatment planning is a time-consuming and potentially subjective process that requires the iterative adjustment of model parameters to balance multiple conflicting objectives. Recent advancements in large foundation models offer promising avenues for addressing the challenges in planning and clinical decision-making. This study introduces GPT-RadPlan, a fully automated treatment planning framework that harnesses prior radiation oncology knowledge encoded in multi-modal large language models, such as GPT-4Vision (GPT-4V) from OpenAI. GPT-RadPlan is made aware of planning protocols as context and acts as an expert human planner, capable of guiding a treatment planning process. Via in-context learning, we incorporate clinical protocols for various disease sites as prompts to enable GPT-4V to acquire treatment planning domain knowledge. The resulting GPT-RadPlan agent is integrated into our in-house inverse treatment planning system through an API. The efficacy of the automated planning system is showcased using multiple prostate and head & neck cancer cases, where we compared GPT-RadPlan results to clinical plans. In all cases, GPT-RadPlan either outperformed or matched the clinical plans, demonstrating superior target coverage and organ-at-risk sparing. Consistently satisfying the dosimetric objectives in the clinical protocol, GPT-RadPlan represents the first multimodal large language model agent that mimics the behaviors of human planners in radiation oncology clinics, achieving remarkable results in automating the treatment planning process without the need for additional training. △ Less

Submitted 1 July, 2024; v1 submitted 21 June, 2024; originally announced June 2024.

Comments: 12 pages, 4 figures

A microwave photonic prototype for concurrent radar detection and spectrum sensing over an 8 to 40 GHz bandwidth

Authors: Taixia Shi, Dingding Liang, Lu Wang, Lin Li, Shaogang Guo, Jiawei Gao, Xiaowei Li, Chulun Lin, Lei Shi, Baogang Ding, Shiyang Liu, Fangyi Yang, Chi Jiang, Yang Chen

Abstract: In this work, a microwave photonic prototype for concurrent radar detection and spectrum sensing is proposed, designed, built, and investigated. A direct digital synthesizer and an analog electronic circuit are integrated to generate an intermediate frequency (IF) linearly frequency-modulated (LFM) signal with a tunable center frequency from 2.5 to 9.5 GHz and an instantaneous bandwidth of 1 GHz.… ▽ More In this work, a microwave photonic prototype for concurrent radar detection and spectrum sensing is proposed, designed, built, and investigated. A direct digital synthesizer and an analog electronic circuit are integrated to generate an intermediate frequency (IF) linearly frequency-modulated (LFM) signal with a tunable center frequency from 2.5 to 9.5 GHz and an instantaneous bandwidth of 1 GHz. The IF LFM signal is converted to the optical domain via an intensity modulator and then filtered by a fiber Bragg grating (FBG) to generate only two 2nd-order optical LFM sidebands. In radar detection, the two optical LFM sidebands beat with each other to generate a frequency-and-bandwidth-quadrupled LFM signal, which is used for ranging, radial velocity measurement, and imaging. By changing the center frequency of the IF LFM signal, the radar function can be operated within 8 to 40 GHz. In spectrum sensing, one 2nd-order optical LFM sideband is selected by another FBG, which then works in conjunction with the stimulated Brillouin scattering gain spectrum to map the frequency of the signal under test to time with an instantaneous measurement bandwidth of 2 GHz. By using a frequency shift module to adjust the pump frequency, the frequency measurement range can be adjusted from 0 to 40 GHz. The prototype is comprehensively studied and tested, which is capable of achieving a range resolution of 3.75 cm, a range error of less than $\pm$ 2 cm, a radial velocity error within $\pm$ 1 cm/s, delivering clear imaging of multiple small targets, and maintaining a frequency measurement error of less than $\pm$ 7 MHz and a frequency resolution of better than 20 MHz. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 18 pages, 12 figures, 1 table

Microwave amplification chain calibration in an axion haloscope via cavity-emitted radiation

Authors: Hsin Chang, Han-Wen Liu, Hien Thi Doan, Yung-Fu Chen

Abstract: In an axion haloscope, the weak photon signal, theoretically converted from axions, is captured by a detection cavity. The amplification chain assists the signal receiver to read the signal from the cavity and requires accurate calibration. Typically, the readout line is calibrated using the Y-factor method, involving a switch that directs the signal from either the detection line or the calibrati… ▽ More In an axion haloscope, the weak photon signal, theoretically converted from axions, is captured by a detection cavity. The amplification chain assists the signal receiver to read the signal from the cavity and requires accurate calibration. Typically, the readout line is calibrated using the Y-factor method, involving a switch that directs the signal from either the detection line or the calibration line. However, this switch introduces several disadvantages. In response, we propose a calibration method that eliminates the need for a switch. In this approach, the cavity temperature is decoupled to its incoming noise source and can be controlled, resulting in excess or deficiency of the noise spectrum near its resonance frequency. The experimental result shows that the amplification chain can be calibrated directly using the temperature-varied cavity-emitted radiation. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 6 journal pages, 5 figures, and 1 table in the main text

Anatomy of Elite and Mass Polarization in Social Networks

Authors: Ali Salloum, Ted Hsuan Yun Chen, Mikko Kivelä

Abstract: Existing methods for quantifying polarization in social networks typically report a single value describing the amount of polarization in a social system. While this approach can be used to confirm the observation that many societies have witnessed an increase in political polarization in recent years, it misses the complexities that could be used to understand the reasons behind this phenomenon.… ▽ More Existing methods for quantifying polarization in social networks typically report a single value describing the amount of polarization in a social system. While this approach can be used to confirm the observation that many societies have witnessed an increase in political polarization in recent years, it misses the complexities that could be used to understand the reasons behind this phenomenon. Notably, opposing groups can have unequal impact on polarization, and the elites are often understood to be more divided than the masses, making it critical to differentiate their roles in polarized systems. We propose a method to characterize these distinct hierarchies in polarized networks, enabling separate polarization measurements for these groups within a single social system. Applied to polarized topics in the Finnish Twittersphere surrounding the 2019 and 2023 parliamentary elections, our analysis reveals valuable insights: 1) The impact of opposing groups on observed polarization is rarely balanced, and 2) while the elite strongly contributes to structural polarization and consistently display greater alignment across various topics, the masses have also recently experienced a surge in issue alignment, a special form of polarization. Our findings suggest that the masses may not be as immune to an increasingly polarized environment as previously thought. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

The coupling mechanism between crossed-beams energy transfer and stimulated Brillouin scattering in homogeneous plasmas

Authors: Y. Chen, Q. Wang, C. Y. Zheng, Z. J. Liu, L. H. Cao, C. Z. Xiao

Abstract: The coupling mechanism between crossed beams energy transfer and stimulated Brillouin scattering in homogeneous plasmas are studied by theoretical analysis, fluid simulations and particle in cell(PIC) simulations. The numerical models of laser plasma instabilities are constructed by solving coupling equations with Schodinger equations form, and the fluid simulation results are confirmed by fluid t… ▽ More The coupling mechanism between crossed beams energy transfer and stimulated Brillouin scattering in homogeneous plasmas are studied by theoretical analysis, fluid simulations and particle in cell(PIC) simulations. The numerical models of laser plasma instabilities are constructed by solving coupling equations with Schodinger equations form, and the fluid simulation results are confirmed by fluid theory and PIC simulations.In the parameter regime when the pump depletion does not occur in CBET and the reflectivity of SBS is lower than 1%, SBS will be affected by CBET, the CBET energy gain will still agree with theoretical predications. However, In the parameter regime when the pump depletion does occur in CBET and the reflectivity of SBS is higher than 1%, the CBET spatial gain will be reduced by the interaction of CBET and SBS, and the huge difference of SBS reflectivity for two crossed laser beams is observed.In the PIC simulations, we found that lower ZTe=Ti will significantly reduce the interaction between CBET and SBS (Z is the ion charge, Teis the electron temperature, Ti is the ion temperature). △ Less

Submitted 1 July, 2024; v1 submitted 15 June, 2024; originally announced June 2024.

Comments: 10pages,11 figures

Improving neutrino energy estimation of charged-current interaction events with recurrent neural networks in MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book , et al. (164 additional authors not shown)

Abstract: We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstr… ▽ More We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstructing and summing visible energies, often experience sizable biases and resolution smearing because of the complex nature of neutrino interactions and the detector response. The estimation of neutrino energy can be improved after considering the kinematics information of reconstructed final-state particles. Utilizing kinematic information of reconstructed particles, the deep learning-based approach shows improved resolution and reduced bias for the muon neutrino Monte Carlo simulation sample compared to the traditional approach. In order to address the common concern about the effectiveness of this method on experimental data, the RNN-based energy estimator is further examined and validated with dedicated data-simulation consistency tests using MicroBooNE data. We also assess its potential impact on a neutrino oscillation study after accounting for all statistical and systematic uncertainties and show that it enhances physics sensitivity. This method has good potential to improve the performance of other physics analyses. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Report number: FERMILAB-PUB-24-0287

FireBench: A High-fidelity Ensemble Simulation Framework for Exploring Wildfire Behavior and Data-driven Modeling

Authors: Qing Wang, Matthias Ihme, Cenk Gazen, Yi-Fan Chen, John Anderson

Abstract: Background. Wildfire research uses ensemble methods to analyze fire behaviors and assess uncertainties. Nonetheless, current research methods are either confined to simple models or complex simulations with limits. Modern computing tools could allow for efficient, high-fidelity ensemble simulations. Aims. This study proposes a high-fidelity ensemble wildfire simulation framework for studying wildf… ▽ More Background. Wildfire research uses ensemble methods to analyze fire behaviors and assess uncertainties. Nonetheless, current research methods are either confined to simple models or complex simulations with limits. Modern computing tools could allow for efficient, high-fidelity ensemble simulations. Aims. This study proposes a high-fidelity ensemble wildfire simulation framework for studying wildfire behavior, ML tasks, fire-risk assessment, and uncertainty analysis. Methods. In this research, we present a simulation framework that integrates the Swirl-Fire large-eddy simulation tool for wildfire predictions with the Vizier optimization platform for automated run-time management of ensemble simulations and large-scale batch processing. All simulations are executed on tensor-processing units to enhance computational efficiency. Key results. A dataset of 117 simulations is created, each with 1.35 billion mesh points. The simulations are compared to existing experimental data and show good agreement in terms of fire rate of spread. Computations are done for fire acceleration, mean rate of spread, and fireline intensity. Conclusions. Strong coupling between these 2 parameters are observed for the fire spread and intermittency. A critical Froude number that delineates fires from plume-driven to convection-driven is identified and confirmed with literature observations. Implications. The ensemble simulation framework is efficient in facilitating parametric wildfire studies. △ Less

Submitted 12 June, 2024; originally announced June 2024.

Rayleigh surface waves of extremal elastic materials

Authors: Yu Wei, Yi Chen, Wen Cheng, Xiaoning Liu, Gengkai Hu

Abstract: Extremal elastic materials here refer to a specific class of elastic materials whose elastic matrices exhibit one or more zero eigenvalues, resulting in soft deformation modes that, in principle, cost no energy. They can be approximated through artificially designed solid microstructures. Extremal elastic materials have exotic bulk wave properties unavailable with conventional solids due to the so… ▽ More Extremal elastic materials here refer to a specific class of elastic materials whose elastic matrices exhibit one or more zero eigenvalues, resulting in soft deformation modes that, in principle, cost no energy. They can be approximated through artificially designed solid microstructures. Extremal elastic materials have exotic bulk wave properties unavailable with conventional solids due to the soft modes, offering unprecedented opportunities for manipulating bulk waves, e.g., acting as phonon polarizers for elastic waves or invisibility cloaks for underwater acoustic waves. Despite their potential, Rayleigh surface waves, crucially linked to bulk wave behaviors of such extremal elastic materials, have largely remained unexplored so far. In this paper, we theoretically investigate the propagation of Rayleigh waves in extremal elastic materials based on continuum theory and verify our findings with designed microstructure metamaterials based on pantographic structures. Dispersion relations and polarizations of Rayleigh waves in extremal elastic materials are derived, and the impact of higher order gradient effects is also investigated by using strain gradient theory. This study provides a continuum model for exploring surface waves in extremal elastic materials and may stimulate applications of extremal elastic materials for controlling surface waves. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: 8 figures

Enabling Large-Scale and High-Precision Fluid Simulations on Near-Term Quantum Computers

Authors: Zhao-Yun Chen, Teng-Yang Ma, Chuang-Chao Ye, Liang Xu, Ming-Yang Tan, Xi-Ning Zhuang, Xiao-Fan Xu, Yun-Jie Wang, Tai-Ping Sun, Yong Chen, Lei Du, Liang-Liang Guo, Hai-Feng Zhang, Hao-Ran Tao, Tian-Le Wang, Xiao-Yan Yang, Ze-An Zhao, Peng Wang, Sheng Zhang, Chi Zhang, Ren-Ze Zhao, Zhi-Long Jia, Wei-Cheng Kong, Meng-Han Dou, Jun-Chao Wang , et al. (7 additional authors not shown)

Abstract: Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement o… ▽ More Quantum computational fluid dynamics (QCFD) offers a promising alternative to classical computational fluid dynamics (CFD) by leveraging quantum algorithms for higher efficiency. This paper introduces a comprehensive QCFD method, including an iterative method "Iterative-QLS" that suppresses error in quantum linear solver, and a subspace method to scale the solution to a larger size. We implement our method on a superconducting quantum computer, demonstrating successful simulations of steady Poiseuille flow and unsteady acoustic wave propagation. The Poiseuille flow simulation achieved a relative error of less than $0.2\%$, and the unsteady acoustic wave simulation solved a 5043-dimensional matrix. We emphasize the utilization of the quantum-classical hybrid approach in applications of near-term quantum computers. By adapting to quantum hardware constraints and offering scalable solutions for large-scale CFD problems, our method paves the way for practical applications of near-term quantum computers in computational science. △ Less

Submitted 19 June, 2024; v1 submitted 10 June, 2024; originally announced June 2024.

Comments: 31 pages, 10 figures

Simulation Models for Exploring Magnetic Reconnection

Authors: Michael Shay, Subash Adhikari, Naoki Beesho, Joachim Birn, Jorg Buechner, Paul Cassak, Li-Jen Chen, Yuxi Chen, Giulia Cozzani, Jim Drake, Fan Guo, Michael Hesse, Neeraj Jain, Yann Pfau-Kempf, Yu Lin, Yi-Hsin Liu, Mitsuo Oka, Yuri A. Omelchenko, Minna Palmroth, Oreste Pezzi, Patricia H. Reiff, Marc Swisdak, Frank Toffoletto, Gabor Toth, Richard A. Wolf

Abstract: Simulations have played a critical role in the advancement of our knowledge of magnetic reconnection. However, due to the inherently multiscale nature of reconnection, it is impossible to simulate all physics at all scales. For this reason, a wide range of simulation methods have been crafted to study particular aspects and consequences of magnetic reconnection. This chapter reviews many of these… ▽ More Simulations have played a critical role in the advancement of our knowledge of magnetic reconnection. However, due to the inherently multiscale nature of reconnection, it is impossible to simulate all physics at all scales. For this reason, a wide range of simulation methods have been crafted to study particular aspects and consequences of magnetic reconnection. This chapter reviews many of these methods, laying out critical assumptions, numerical techniques, and giving examples of scientific results. Plasma models described include magnetohydrodynamics (MHD), Hall MHD, Hybrid, kinetic particle-in-cell (PIC), kinetic Vlasov, Fluid models with embedded PIC, Fluid models with direct feedback from energetic populations, and the Rice Convection Model (RCM). △ Less

Submitted 9 June, 2024; originally announced June 2024.

Comments: Chapter 5.2 of ISSI Book on Magnetic Reconnection, submitted to Space Science Reviews

Characterization of Recirculating Waveguide Meshes Based on an Optimization Method with a Parameter Space Reduction Technology

Authors: Ran Tao, Jifang Qiu, Yuchen Chen, Bowen Zhang, Yan Li, Hongxiang Guo, Jian Wu

Abstract: Fabrication imperfections must be considered during configuration to ensure that the setup is suitable for the actual fabricated programmable photonic integrated circuits (PPICs). Therefore, characterization of imperfections is crucial but difficult, especially for PPICs made from recirculating waveguide meshes. The flexibility required by these meshes demands a more complex topology and compact T… ▽ More Fabrication imperfections must be considered during configuration to ensure that the setup is suitable for the actual fabricated programmable photonic integrated circuits (PPICs). Therefore, characterization of imperfections is crucial but difficult, especially for PPICs made from recirculating waveguide meshes. The flexibility required by these meshes demands a more complex topology and compact TBU structure, complicating the characterization. In this paper, we propose a characterization method applicable to recirculating waveguide meshes based on an optimization approach, along with a step-by-step procedure to reduce the parameter space of optimization, allowing for characterizing imperfect parameters of each individual component within the waveguide mesh. To the best of our knowledge, this method can greatly broaden the range of characterized parameters compared to currently reported methods. In order to verify the effectiveness of our method, we used the characterized parameters to build a multi-frequency model of a mesh with fabrication errors and successfully demonstrated accurate prediction of its behavior. Furthermore, we applied our method on implementations of 6 different kind of FIR/IRR filters, to further prove the effectiveness of our method in configuring applications on meshes with fabrication errors. At last, our method was carried out under various scenarios considering beam splitter splitting ratio variance, inaccurate measurements of mesh and imprecise TBU insertion loss characterization, to demonstrate its strong robustness under various practical scenarios. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Prevalence of non-standard collapsing of strong Langmuir turbulence in solar corona plasmas

Authors: Yaokun Li, Haomin Sun, Hao Ning, Sulan Ni, Xiangliang Kong, Jiansen He, Yao Chen

Abstract: We present a fully-kinetic simulation of the full life cycle of strong Langmuir turbulence (SLT) excited by electron beams that are accelerated under the solar corona conditions. We find that (1) most packets ($\sim$80%) are affected by their neighbors during their collapse, as a result, their spatial scale variations present non-standard evolutionary features, i.e., deviating away from what was p… ▽ More We present a fully-kinetic simulation of the full life cycle of strong Langmuir turbulence (SLT) excited by electron beams that are accelerated under the solar corona conditions. We find that (1) most packets ($\sim$80%) are affected by their neighbors during their collapse, as a result, their spatial scale variations present non-standard evolutionary features, i.e., deviating away from what was predicted by the Zakharov model; (2) the collapsing cavity is too shallow to trap the wave packet due to the growth of the Coulomb force, as a result a majority ($\sim$70%) of the packet energy runs away and a secondary localization may occur. The study indicates that the non-standard Langmuir collapse may play an important role in coronal plasmas interacting with an intense electron beam, that may be eventually confirmed by humanity's first mission to fly through the corona. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Resolving the Orientations of and Separation between an Overlapping Pair of Dipole Emitters

Authors: Yiyang Chen, Yuanxin Qiu, Matthew D. Lew

Abstract: We prove that it is impossible to distinguish two spatially overlapping fluorescent molecules from a single rotating molecule, even if one modulates the polarization of pumping light or the detection dipole-spread function (DSF). If the target is known to be a dipole pair, existing imaging methods perform poorly for measuring their angular separation. We propose simultaneously modulating the excit… ▽ More We prove that it is impossible to distinguish two spatially overlapping fluorescent molecules from a single rotating molecule, even if one modulates the polarization of pumping light or the detection dipole-spread function (DSF). If the target is known to be a dipole pair, existing imaging methods perform poorly for measuring their angular separation. We propose simultaneously modulating the excitation polarization and DSF, which demonstrates robust discrimination between dipole pairs versus single molecules. Our method improves the precision of measuring centroid orientation by 50% and angular separation by 4- to 6-fold over existing techniques. △ Less

Submitted 26 June, 2024; v1 submitted 6 June, 2024; originally announced June 2024.

Comments: 6 pages, 4 figures

Quantum erasure based on phase structure

Authors: Ye Yang, Chengyuan Wang, Yun Chen, Jianyi Xv, Xin Yang, Jinwen Wang, Shuwei Qiu, Hong Gao, Fuli Li

Abstract: The quantum eraser effect exemplifies the distinct properties of quantum mechanics that challenge classical intuition and expose the wave-particle duality of light. This effect has been extensively explored in various experiments; most of these investigations use polarisation to distinguish which path information, and less attention has been paid to the phase structure which is related wavefront o… ▽ More The quantum eraser effect exemplifies the distinct properties of quantum mechanics that challenge classical intuition and expose the wave-particle duality of light. This effect has been extensively explored in various experiments; most of these investigations use polarisation to distinguish which path information, and less attention has been paid to the phase structure which is related wavefront of photon. In this study, we introduce a theoretical framework for quantum erasure that focusses on the phase structure and demonstrate it experimentally. In this experiment, we employ a Mach-Zehnder interferometer (MZI) where a first-order spiral phase plate (SPP) is integrated into one of its arms. This setup applied orbital angular momentum (OAM) to the photons and established predetermined which-way information. Consequently, the photon demonstrates its particle characteristics, with absence of interference at the MZI's output ports. Utilizing an additional SPP to erase the phase structure from the output photon results in pronounced interference patterns, observable in a post-measurement scenario. This result allows us to include the structure information of the equiphase plane of the light field in quantum erasure. The results challenge the traditional cause-effect relationship in classical physics, given that the subsequent choice of the SPP adheres to a space-like separation. △ Less

Submitted 18 May, 2024; originally announced June 2024.

A Study of the Latest Updates of the Readout System for the Hybird-Pixel Detector at HEPS

Authors: Hangxu Li, Jie Zhang, Wei Wei, Zhenjie Li, Xiaolu Ji, Yan Zhang, Xuanzheng Yang, Shuihan Zhang, Xueke Ma, Peng Liu, Zheng Wang, Yuanbai Chen

Abstract: The High Energy Photon Source (HEPS) represents a fourth-generation light source. This facility has made unprecedented advancements in accelerator technology, necessitating the development of new detectors to satisfy physical requirements such as single-photon resolution, large dynamic range, and high frame rates. Since 2016, the Institute of High Energy Physics has introduced the first user-exper… ▽ More The High Energy Photon Source (HEPS) represents a fourth-generation light source. This facility has made unprecedented advancements in accelerator technology, necessitating the development of new detectors to satisfy physical requirements such as single-photon resolution, large dynamic range, and high frame rates. Since 2016, the Institute of High Energy Physics has introduced the first user-experimental hybrid pixel detector, progressing to the fourth-generation million-pixel detector designed for challenging conditions, with the dual-threshold single-photon detector HEPS-Beijing PIXel (HEPS-BPIX) set as the next-generation target. HEPS-BPIX will employ the entirely new Application-Specific Integrated Circuit (ASIC) BP40 for pixel information readout. Data flow will be managed and controlled through readout electronics based on a two-tier Field-Programmable Gate Array (FPGA) system: the Front-End Electronics (FEE) and the Input-Output Board (IOB) handle the fan-out for 12 ASICs, and the u4FCP is tasked with processing serial data on high-speed links, transferring pixel-level data to the back-end RTM and uTCA chassis, or independently outputting through a network port, enabling remote control of the entire detector. The new HEPS-BPIX firmware has undergone a comprehensive redesign and update to meet the electronic characteristics of the new chip and to improve the overall performance of the detector. We provide an overview of the core subunits of HEPS-BPIX, emphasizing the readout system, evaluating the new hardware and firmware, and highlighting some of its innovative features and characteristics. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Enhanced Nonlinear Frequency Conversion Bandwidth through Birefringence induced Mode Hybridization

Authors: Tingge Yuan, Jiangwei Wu, Xueyi Wang, Hao Li, Yuping Chen, Xianfeng Chen

Abstract: On-chip quantum information network requires qubit transfer between different wavelengths while preserving quantum coherence and entanglement, which needs broadband up-conversion available. Herein, we demonstrate a mode-hybridization based broadband nonlinear frequency conversion on X-cut thin film lithium niobate. With the spontaneous quasi-phase matching and quasi groupvelocity matching being si… ▽ More On-chip quantum information network requires qubit transfer between different wavelengths while preserving quantum coherence and entanglement, which needs broadband up-conversion available. Herein, we demonstrate a mode-hybridization based broadband nonlinear frequency conversion on X-cut thin film lithium niobate. With the spontaneous quasi-phase matching and quasi groupvelocity matching being simultaneously satisfied, broadband second harmonic generation with a 3-dB bandwidth up to 13 nm has been achieved in a micro-racetrack resonator. The same mechanism can work on the frequency conversion of the ultra-short pulse in the bent waveguide structure. This work will be beneficial to on-chip tunable frequency conversion and quantum light source generation on integrated photonic platforms, and further enable on-chip large-capacity multiplexing, multichannel optical information processing, and large quantum information networks. △ Less

Submitted 4 June, 2024; originally announced June 2024.

PreMevE-MEO: Predicting Ultra-relativistic Electrons Using Observations from GPS Satellites

Authors: Yinan Feng, Yue Chen, Youzuo Lin

Abstract: Ultra-relativistic electrons with energies greater than or equal to two megaelectron-volt (MeV) pose a major radiation threat to spaceborne electronics, and thus specifying those highly energetic electrons has a significant meaning to space weather communities. Here we report the latest progress in developing our predictive model for MeV electrons in the outer radiation belt. The new version, prim… ▽ More Ultra-relativistic electrons with energies greater than or equal to two megaelectron-volt (MeV) pose a major radiation threat to spaceborne electronics, and thus specifying those highly energetic electrons has a significant meaning to space weather communities. Here we report the latest progress in developing our predictive model for MeV electrons in the outer radiation belt. The new version, primarily driven by electron measurements made along medium-Earth-orbits (MEO), is called PREdictive MEV Electron (PreMevE)-MEO model that nowcasts ultra-relativistic electron flux distributions across the whole outer belt. Model inputs include above 2 MeV electron fluxes observed in MEOs by a fleet of GPS satellites as well as electrons measured by one Los Alamos satellite in the geosynchronous orbit. We developed an innovative Sparse Multi-Inputs Latent Ensemble NETwork (SmileNet) which combines convolutional neural networks with transformers, and we used long-term in-situ electron data from NASA's Van Allen Probes mission to train, validate, optimize, and test the model.It is shown that PreMevE-MEO can provide hourly nowcasts with high model performance efficiency and high correlation with observations.This prototype PreMevE-MEO model demonstrates the feasibility of making high-fidelity predictions driven by observations from longstanding space infrastructure in MEO, thus has great potential of growing into an invaluable space weather operational warning tool. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Comments: 18 pages (double-spaced in Word format) with 9 figures; manuscript submitted to Space Weather Journal under review

Report number: LA-UR-24-23843

Pt nanoparticles dispersed in a metal-organic framework as peroxidase mimics for colorimetric detection of GSH

Authors: Yanzheng Shu, Yanwei Chen, Guiye Shan

Abstract: Metal-organic skeleton materials have been widely used in catalysis with their porous structure and adsorption properties. Precious metal nanoparticles have good catalytic properties. If the noble metal nanoparticles are adsorbed on the MOFs surface, the active sites can be increased and the catalytic effect of the materials can be greatly improved. We successfully synthesized Pt@ZIF-8 in two step… ▽ More Metal-organic skeleton materials have been widely used in catalysis with their porous structure and adsorption properties. Precious metal nanoparticles have good catalytic properties. If the noble metal nanoparticles are adsorbed on the MOFs surface, the active sites can be increased and the catalytic effect of the materials can be greatly improved. We successfully synthesized Pt@ZIF-8 in two steps, the average particle size of Pt nanoparticles is about 3 nm. Pt@ZIF-8 possesses peroxidase activity and can oxidize colorless TMB to oxTMB in the presence of hydrogen peroxide. The peroxide-like nature of Pt@ZIF-8 is consistent with Michaelis-Menten kinetics. Glutathione is a reducing substance that reduces blue oxTMB to colorless oxTMB. This colorimetric method achieves a simple, sensitive and intuitive detection of glutathione. The detection limit of this experiment is low, which is promising in biomolecular detection. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Discovering an interpretable mathematical expression for a full wind-turbine wake with artificial intelligence enhanced symbolic regression

Authors: Ding Wang, Yuntian Chen, Shiyi Chen

Abstract: The rapid expansion of wind power worldwide underscores the critical significance of engineering-focused analytical wake models in both the design and operation of wind farms. These theoretically-derived ana lytical wake models have limited predictive capabilities, particularly in the near-wake region close to the turbine rotor, due to assumptions that do not hold. Knowledge discovery methods can… ▽ More The rapid expansion of wind power worldwide underscores the critical significance of engineering-focused analytical wake models in both the design and operation of wind farms. These theoretically-derived ana lytical wake models have limited predictive capabilities, particularly in the near-wake region close to the turbine rotor, due to assumptions that do not hold. Knowledge discovery methods can bridge these gaps by extracting insights, adjusting for theoretical assumptions, and developing accurate models for physical processes. In this study, we introduce a genetic symbolic regression (SR) algorithm to discover an interpretable mathematical expression for the mean velocity deficit throughout the wake, a previously unavailable insight. By incorporating a double Gaussian distribution into the SR algorithm as domain knowledge and designing a hierarchical equation structure, the search space is reduced, thus efficiently finding a concise, physically informed, and robust wake model. The proposed mathematical expression (equation) can predict the wake velocity deficit at any location in the full-wake region with high precision and stability. The model's effectiveness and practicality are validated through experimental data and high-fidelity numerical simulations. △ Less

Submitted 2 June, 2024; originally announced June 2024.

Ground state phases of the two-dimension electron gas with a unified variational approach

Authors: Conor Smith, Yixiao Chen, Ryan Levy, Yubo Yang, Miguel A. Morales, Shiwei Zhang

Abstract: The two-dimensional electron gas (2DEG) is a fundamental model, which is drawing increasing interest because of recent advances in experimental and theoretical studies of 2D materials. Current understanding of the ground state of the 2DEG relies on quantum Monte Carlo calculations, based on variational comparisons of different ansatze for different phases. We use a single variational ansatz, a gen… ▽ More The two-dimensional electron gas (2DEG) is a fundamental model, which is drawing increasing interest because of recent advances in experimental and theoretical studies of 2D materials. Current understanding of the ground state of the 2DEG relies on quantum Monte Carlo calculations, based on variational comparisons of different ansatze for different phases. We use a single variational ansatz, a general backflow-type wave function using a message-passing neural quantum state architecture, for a unified description across the entire density range. The variational optimization consistently leads to lower ground-state energies than previous best results. Transition into a Wigner crystal (WC) phase occurs automatically at rs = 37 +/- 1, a density lower than currently believed. Between the liquid and WC phases, the same ansatz and variational search strongly suggest the existence of intermediate states in a broad range of densities, with enhanced short-range nematic spin correlations. △ Less

Submitted 29 May, 2024; originally announced May 2024.

"Stumbling-to-Fetters" mechanism and Virginia Creeper model in hydrogel for designing bionic cardiovascular system

Authors: Hanqing Dai, Wenqing Dai, Yuanyuan Chen, Wanlu Zhang, Yimeng Wang, Ruiqian Guo, Guoqi Zhang

Abstract: Manufacturing hydrogels with identical electrochemical properties are typically riddled with unresolved inquiries and challenges. Here, we utilized ultra-light graphene flakes to trace the influence of convection phenomena during reactions on hydrogels' formation and structural non-uniformity, elucidating its mechanisms. Furthermore, we confirmed that an external electric field induced the orienta… ▽ More Manufacturing hydrogels with identical electrochemical properties are typically riddled with unresolved inquiries and challenges. Here, we utilized ultra-light graphene flakes to trace the influence of convection phenomena during reactions on hydrogels' formation and structural non-uniformity, elucidating its mechanisms. Furthermore, we confirmed that an external electric field induced the orientation of functional groups of hydrogels along the direction of this field, revealing the mechanism of its influence on the structural non-uniformity and electrochemical properties of hydrogels. Additionally, we discovered that ion diffusion was "Stumbling-to-Fetters" by the functional groups on the polymer chains within the hydrogel, unveiling this mechanism and developing the Virginia Creeper (VC) model for hydrogels. We demonstrated the scalability and application of the VC model. Furthermore, we proposed a molecular-ion diffusion and current decay equation to describe the electrochemical properties of hydrogels. As an application of the VC model, we developed a bionic cardiovascular system and proved its potential to seamlessly interface with living organisms and generate bio-like bioelectricity. Our findings provide novel insights into triboelectricity and guidance for producing hydrogels with identical electrochemical properties, and offer a new pathway for bioelectric generation and the design of new hydrogel devices. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Double-layer Thin-film LiNbO3 Longitudinally Excited Shear Wave Resonators with Ultra-large Electromechanical Coupling Coefficient and Spurious-Free Performance

Authors: Zhen-Hui Qin, Shu-Mao Wu, Chen-Bei Hao, Hua-Yang Chen, Sheng-Nan Liang, Si-Yuan Yu, Yan-Feng Chen

Abstract: This work proposes a double-layer thin-film lithium niobate (LiNbO3) longitudinally excited shear wave resonator with a theoretical electromechanical coupling coefficient exceeding 60%, RaR close to 28%, and no spurious modes. This ultra-large electromechanical coupling coefficient, which is close to the upper limit of LiNbO3, is much larger than all microwave acoustic resonators reported so far.… ▽ More This work proposes a double-layer thin-film lithium niobate (LiNbO3) longitudinally excited shear wave resonator with a theoretical electromechanical coupling coefficient exceeding 60%, RaR close to 28%, and no spurious modes. This ultra-large electromechanical coupling coefficient, which is close to the upper limit of LiNbO3, is much larger than all microwave acoustic resonators reported so far. Based on X-cut thin-film LiNbO3, when the film thickness is in the order of hundreds of nanometers, the frequency of the fundamental mode of the resonator can cover 1GHz to10GHz. The resonator design is convenient and flexible. The resonant frequency can be modulated monotonically by changing either the electrode or the thickness of the thin-film LiNbO3 without introducing additional spurious modes. This ideal resonator architecture is also applicable to LiTaO3. With the development of the new generation of mobile communications, this resonator is expected to become a key solution for future high-performance, ultra-wide-bandwidth acoustic filters. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: 15 pages,9 figures

Seamless Integration and Implementation of Distributed Contact and Contactless Vital Sign Monitoring

Authors: Dingding Liang, Yang Chen, Jiawei Gao, Taixia Shi, Jianping Yao

Abstract: Real-time vital sign monitoring is gaining immense significance not only in the medical field but also in personal health management. Facing the needs of different application scenarios of the smart and healthy city in the future, the low-cost, large-scale, scalable, and distributed vital sign monitoring system is of great significance. In this work, a seamlessly integrated contact and contactless… ▽ More Real-time vital sign monitoring is gaining immense significance not only in the medical field but also in personal health management. Facing the needs of different application scenarios of the smart and healthy city in the future, the low-cost, large-scale, scalable, and distributed vital sign monitoring system is of great significance. In this work, a seamlessly integrated contact and contactless vital sign monitoring system, which can simultaneously implement respiration and heartbeat monitoring, is proposed. In contact vital sign monitoring, the chest wall movement due to respiration and heartbeat is translated into changes in the optical output intensity of a fiber Bragg grating (FBG). The FBG is also an important part of radar signal generation for contactless vital sign monitoring, in which the chest wall movement is translated into phase changes of the radar de-chirped signal. By analyzing the intensity of the FBG output and phase of the radar de-chirped signal, real-time respiration and heartbeat monitoring are realized. In addition, due to the distributed structure of the system and its good integration with the wavelength-division multiplexing optical network, it can be massively scaled by employing more wavelengths. A proof-of-concept experiment is carried out. Contact and contactless respiration and heartbeat monitoring of three people are simultaneously realized. During a monitoring time of 60 s, the maximum absolute measurement errors of respiration and heartbeat rates are 1.6 respirations per minute and 2.3 beats per minute, respectively. The measurement error does not have an obvious change even when the monitoring time is decreased to 5 s. △ Less

Submitted 24 May, 2024; originally announced May 2024.

Comments: 14 pages,9 figures

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Spatial-temporal manipulations of visible nanosecond sub-pulse sequences in an actively Q-switched Pr:YLF laser

Authors: Shengbo Xu, Yunru Chen, Ran Xia, Changcheng Duan, Qingrui Zeng, Yu Xiao, Xiahui Tang, Gang Xu

Abstract: Pulsed visible lasers either by Q-switching or mode locking have been attracting intense attentions both in solid-state laser and fiber laser. Here, we report on the simultaneous manipulation of reconfigurable sub-pulse sequences and customizable high-order vortex beams in an actively Q-switched visible laser. On the one hand, pulse sequences with up to 4 sub-pulses could be generated and fully co… ▽ More Pulsed visible lasers either by Q-switching or mode locking have been attracting intense attentions both in solid-state laser and fiber laser. Here, we report on the simultaneous manipulation of reconfigurable sub-pulse sequences and customizable high-order vortex beams in an actively Q-switched visible laser. On the one hand, pulse sequences with up to 4 sub-pulses could be generated and fully controlled by means of an acoustic-optic modulator driven by an arbitrary waveform generator. Both pulse number and pulse intensity can be manipulated through the programmable step-signal, which is also theoretically simulated through the rate equations. On the other hand, assisted by the off-axis pumping technique and the astigmatic mode conversion, the laser cavity could emit high-quality vortex beams carrying Laguerre-Gaussian modes up to 30th order. To the best of our knowledge, this is the most flexible active manipulations not only on the intensity distribution of the transverse modes but also on the temporal distribution of the pulse sequences in a visible laser. The versatile manipulating techniques in this work could be immediately implemented into all other solid-state lasers to obtain sub-pulse vortex beams, which may provide enhanced functionality and flexibility for a large range of laser systems. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Fully Automated OCT-based Tissue Screening System

Authors: Shaohua Pi, Razieh Ganjee, Lingyun Wang, Riley K. Arbuckle, Chengcheng Zhao, Jose A Sahel, Bingjie Wang, Yuanyuan Chen

Abstract: This study introduces a groundbreaking optical coherence tomography (OCT) imaging system dedicated for high-throughput screening applications using ex vivo tissue culture. Leveraging OCT's non-invasive, high-resolution capabilities, the system is equipped with a custom-designed motorized platform and tissue detection ability for automated, successive imaging across samples. Transformer-based deep… ▽ More This study introduces a groundbreaking optical coherence tomography (OCT) imaging system dedicated for high-throughput screening applications using ex vivo tissue culture. Leveraging OCT's non-invasive, high-resolution capabilities, the system is equipped with a custom-designed motorized platform and tissue detection ability for automated, successive imaging across samples. Transformer-based deep learning segmentation algorithms further ensure robust, consistent, and efficient readouts meeting the standards for screening assays. Validated using retinal explant cultures from a mouse model of retinal degeneration, the system provides robust, rapid, reliable, unbiased, and comprehensive readouts of tissue response to treatments. This fully automated OCT-based system marks a significant advancement in tissue screening, promising to transform drug discovery, as well as other relevant research fields. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Search for solar axions by Primakoff effect with the full dataset of the CDEX-1B Experiment

Authors: L. T. Yang, S. K. Liu, Q. Yue, K. J. Kang, Y. J. Li, H. P. An, Greeshma C., J. P. Chang, Y. H. Chen, J. P. Cheng, W. H. Dai, Z. Deng, C. H. Fang, X. P. Geng, H. Gong, Q. J. Guo, T. Guo, X. Y. Guo, L. He, J. R. He, J. W. Hu, H. X. Huang, T. C. Huang, L. Jiang, S. Karmakar , et al. (61 additional authors not shown)

Abstract: We present the first limit on $g_{Aγ}$ coupling constant using the Bragg-Primakoff conversion based on an exposure of 1107.5 kg days of data from the CDEX-1B experiment at the China Jinping Underground Laboratory. The data are consistent with the null signal hypothesis, and no excess signals are observed. Limits of the coupling $g_{Aγ}<2.08\times10^{-9}$ GeV$^{-1}$ (95\% C.L.) are derived for axio… ▽ More We present the first limit on $g_{Aγ}$ coupling constant using the Bragg-Primakoff conversion based on an exposure of 1107.5 kg days of data from the CDEX-1B experiment at the China Jinping Underground Laboratory. The data are consistent with the null signal hypothesis, and no excess signals are observed. Limits of the coupling $g_{Aγ}<2.08\times10^{-9}$ GeV$^{-1}$ (95\% C.L.) are derived for axions with mass up to 100 eV/$c^2$. Within the hadronic model of KSVZ, our results exclude axion mass $>5.3~\rm{eV}/c^2$ at 95\% C.L. △ Less

Submitted 12 May, 2024; originally announced May 2024.

Comments: 7 pages, 5 figures

Hybrid thin-film lithium niobate micro-ring acousto-optic modulator for microwave-to-optical conversion

Authors: Lei Wan, Jiying Huang, Meixun Wen, Huan Li, Wenfeng Zhou, Zhiqiang Yang, Yuping Chen, Huilong Liu, Siqing Zeng, Dong Liu, Shuixian Yang, Daoxin Dai, Zhaohui Li

Abstract: Highly efficient acousto-optic modulation plays a vital role in the microwave-to-optical conversion. Herein, we demonstrate a hybrid thin-film lithium niobate (TFLN) racetrack micro-ring acousto-optic modulator (AOM) implemented with low-loss chalcogenide (ChG) waveguide. By engineering the electrode configuration of the interdigital transducer, the double-arm micro-ring acousto-optic modulation i… ▽ More Highly efficient acousto-optic modulation plays a vital role in the microwave-to-optical conversion. Herein, we demonstrate a hybrid thin-film lithium niobate (TFLN) racetrack micro-ring acousto-optic modulator (AOM) implemented with low-loss chalcogenide (ChG) waveguide. By engineering the electrode configuration of the interdigital transducer, the double-arm micro-ring acousto-optic modulation is experimentally confirmed in nonsuspended ChG loaded TFLN waveguide platform. Varying the position of blue-detuned bias point, the half-wave-voltage-length product VpaiL of the hybrid TFLN micro-ring AOM is as small as 9 mVcm. Accordingly, the acousto-optic coupling strength is estimated to be 0.48 Hz s1/2 at acoustic frequency of 0.84 GHz. By analyzing the generation of phonon number from the piezoelectric transducer, the microwave-to-optical conversion efficiency is calculated to be 0.05%, approximately one order of magnitude larger than that of the state-of-the-art suspended counterpart. Efficient microwave-to-optical conversion thus provides new opportunities for low-power-consumption quantum information transduction using the TFLN-ChG hybrid piezo-optomechanical devices. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Nonequilibrium transport and the fluctuation theorem in the thermodynamic behaviors of nonlinear photonic systems

Authors: Yang Liu, Jincheng Lu, Zhongfei Xiong, Fan O. Wu, Demetrios Christodoulides, Yuntian Chen, Jian-Hua Jiang

Abstract: Nonlinear multimode optical systems have attracted substantial attention due to their rich physical properties. Complex interplay between the nonlinear effects and mode couplings makes it difficult to understand the collective dynamics of photons. Recent studies show that such collective phenomena can be effectively described by a Rayleigh-Jeans thermodynamics theory which is a powerful tool for t… ▽ More Nonlinear multimode optical systems have attracted substantial attention due to their rich physical properties. Complex interplay between the nonlinear effects and mode couplings makes it difficult to understand the collective dynamics of photons. Recent studies show that such collective phenomena can be effectively described by a Rayleigh-Jeans thermodynamics theory which is a powerful tool for the study of nonlinear multimode photonic systems. These systems, in turn, offer a compelling platform for investigating fundamental issues in statistical physics, attributed to their tunability and the ability to access negative temperature regimes. However, to date, a theory for the nonequilibrium transport and fluctuations is yet to be established. Here, we employ the full counting statistics theory to study the nonequilibrium transport of particle and energy in nonlinear multimode photonic systems in both positive and negative temperature regimes. Furthermore, we discover that in situations involving two reservoirs of opposite temperatures and chemical potentials, an intriguing phenomenon known as the loop current effect can arise, wherein the current in the positive energy sector runs counter to that in the negative energy sector. In addition, we numerically confirm that the fluctuation theorem remains applicable in optical thermodynamics systems across all regimes, from positive temperature to negative ones. Our findings closely align with numerical simulations based on first-principles nonlinear wave equations. Our work seeks to deepen the understanding of irreversible non-equilibrium processes and statistical fluctuations in nonlinear many-body photonic systems which will enhance our grasp of collective phenomena of photons and foster a fruitful intersection between optics and statistical physics. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Comments: All comments are welcome

Enhancement of Chirality-Induced Spin Selectivity by Strong Electron Correlations

Authors: Meng Xu, Yan Chen

Abstract: Chirality-induced spin selectivity is a spin-splitting phenomenon from a helical structure with a considerably effective spin-orbit coupling. This unexpectedly large spin-splitting phenomenon has been experimentally observed in chiral organic molecules, which typically show a weak spin-orbit coupling. To understand this, we use the renormalized mean-field theory and Landauer-Büttiker formulas to s… ▽ More Chirality-induced spin selectivity is a spin-splitting phenomenon from a helical structure with a considerably effective spin-orbit coupling. This unexpectedly large spin-splitting phenomenon has been experimentally observed in chiral organic molecules, which typically show a weak spin-orbit coupling. To understand this, we use the renormalized mean-field theory and Landauer-Büttiker formulas to study the transport properties of single-stranded DNA in the presence of strong electron correlation. It shows a significant spin polarization of 46.5% near the Coulomb repulsion limit, which explains the extremely high spin polarization observed in experiments. Compared to systems without electron correlation, the averaged spin polarization in this case is 2 to 4 times greater across various system sizes. Furthermore, the parameter dependence of the spin polarization and the underlying Metal-Insulator transition are studied. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comparison of Ion-Proton Differential Speed between ICMEs and Solar Wind near 1 au

Authors: Xuechao Zhang, Hongqiang Song, Chengxiao Zhang, Hui Fu, Leping Li, Jinrong Li, Xiaoqian Wang, Rui Wang, Yao Chen

Abstract: The elemental abundance of ICMEs and solar wind near 1 au is often adopted to represent the abundance in the corresponding coronal sources. However, the absolute abundance of heavy ions (relative to hydrogen) near 1 au might be different from the coronal abundance due to the ion-proton differential speed ($V_{ip}$). To illustrate the $V_{ip}$ characteristics and explore whether it influences the a… ▽ More The elemental abundance of ICMEs and solar wind near 1 au is often adopted to represent the abundance in the corresponding coronal sources. However, the absolute abundance of heavy ions (relative to hydrogen) near 1 au might be different from the coronal abundance due to the ion-proton differential speed ($V_{ip}$). To illustrate the $V_{ip}$ characteristics and explore whether it influences the absolute abundance analysis for ICMEs and solar wind, we perform a statistical study on the $V_{ip}$ for He$^{2+}$, C$^{5+}$, O$^{6+}$, and Fe$^{10+}$ in both ICMEs and solar wind based on measurements of Advanced Composition Explorer. The results show that the $V_{ip}$ is negligible within ICMEs and slow solar wind ($<$ 400 km s$^{-1}$), while obvious in the intermediate (400 -- 600 km s$^{-1}$) and fast wind ($>$ 600 km s$^{-1}$). Previous studies showed that the $V_{ip}$ in ICMEs keeps negligible during propagation from 0.3 to 5 au, but in solar wind it increases with the decreasing heliocentric distance. Therefore, it might be questionable to infer the absolute abundance of coronal sources through in-situ abundance near 1 au for solar wind. Fortunately, the ion-oxygen (O$^{6+}$) differential speed ($V_{io}$) is negligible for He$^{2+}$, C$^{5+}$, and Fe$^{10+}$ within both ICMEs and solar wind, and previous studies suggested that the $V_{io}$ does not vary significantly with the heliocentric distance. This indicates that various heavy ions always flow at the same bulk speed and their relative abundance (relative to oxygen) near 1 au can represent the coronal abundance for both ICMEs and solar wind. △ Less

Submitted 1 May, 2024; originally announced May 2024.

Comments: 14 pages, 8 figures