-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Electrical Impedance Tomography Based Closed-loop Tumor Treating Fields in Dynamic Lung Tumors
Authors:
Minmin Wang,
Xu Xie,
Yuxi Guo,
Liying Zhu,
Yue Lan,
Haitang Yang,
Yun Pan,
Guangdi Chen,
Shaomin Zhang,
Maomao Zhang
Abstract:
Tumor Treating Fields (TTFields) is a non-invasive anticancer modality that utilizes alternating electric fields to disrupt cancer cell division and growth. While generally well-tolerated with minimal side effects, traditional TTFields therapy for lung tumors faces challenges due to the influence of respiratory motion. We design a novel closed-loop TTFields strategy for lung tumors by incorporatin…
▽ More
Tumor Treating Fields (TTFields) is a non-invasive anticancer modality that utilizes alternating electric fields to disrupt cancer cell division and growth. While generally well-tolerated with minimal side effects, traditional TTFields therapy for lung tumors faces challenges due to the influence of respiratory motion. We design a novel closed-loop TTFields strategy for lung tumors by incorporating electrical impedance tomography (EIT) for real-time respiratory phase monitoring and dynamic parameter adjustments. Furthermore, we conduct theoretical analysis to evaluate the performance of the proposed method using the lung motion model. Compared to conventional TTFields settings, we observed that variations in the electrical conductivity of lung during different respiratory phases led to a decrease in the average electric field intensity within lung tumors, transitioning from end-expiratory (1.08 V/cm) to end-inspiratory (0.87 V/cm) phases. Utilizing our proposed closed-Loop TTFields approach at the same dose setting (2400 mA, consistent with the traditional TTFields setting), we can achieve a higher and consistent average electric field strength at the tumor site (1.30 V/cm) across different respiratory stages. Our proposed closed-loop TTFields method has the potential to improved lung tumor therapy by mitigating the impact of respiratory motion.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
A Broadband Algorithm for Adiabatic Mode Evolution and An Application on Polarization Splitter-Rotator on LNOI Platform
Authors:
Geng Chen,
Chijun Li,
Xuanhao Wang,
Yuankang Huang,
Siyu Lu,
Yiqi Dai,
Xiangyu Meng,
Cheng Zeng,
Jinsong Xia
Abstract:
Adiabatic mode evolution waveguides (AMEWs) are widely utilized in integrated photonics, including tapered waveguides, edge couplers, mode converters, splitters, etc. An analytical theory and a novel AMEW design algorithm are developed to create shortcuts to adiabaticity (STA). With the new algorithm, we demonstrate a broadband and highly efficient polarization splitter-rotator (PSR) on a lithium-…
▽ More
Adiabatic mode evolution waveguides (AMEWs) are widely utilized in integrated photonics, including tapered waveguides, edge couplers, mode converters, splitters, etc. An analytical theory and a novel AMEW design algorithm are developed to create shortcuts to adiabaticity (STA). With the new algorithm, we demonstrate a broadband and highly efficient polarization splitter-rotator (PSR) on a lithium-niobate-on-insulator (LNOI) platform with an LN thickness of 500 nm. The fabricated PSR, with a total length of 2 mm, exhibits an insertion loss (IL) of 0.8 dB and a polarization extinction ratio (ER) of 12 dB over a wavelength range exceeding 76 nm.
△ Less
Submitted 6 July, 2024;
originally announced July 2024.
-
Topological Separation of Vortices
Authors:
Adeel Zafar,
Zahra Poorshayegh,
Di Yang,
Guoning Chen
Abstract:
Vortices and their analysis play a critical role in the understanding of complex phenomena in turbulent flows. Traditional vortex extraction methods, notably region-based techniques, often overlook the entanglement phenomenon, resulting in the inclusion of multiple vortices within a single extracted region. Their separation is necessary for quantifying different types of vortices and their statist…
▽ More
Vortices and their analysis play a critical role in the understanding of complex phenomena in turbulent flows. Traditional vortex extraction methods, notably region-based techniques, often overlook the entanglement phenomenon, resulting in the inclusion of multiple vortices within a single extracted region. Their separation is necessary for quantifying different types of vortices and their statistics. In this study, we propose a novel vortex separation method that extends the conventional contour tree-based segmentation approach with an additional step termed "layering". Upon extracting a vortical region using specified vortex criteria (e.g., $λ_2$), we initially establish topological segmentation based on the contour tree, followed by the layering process to allocate appropriate segmentation IDs to unsegmented cells, thus separating individual vortices within the region. However, these regions may still suffer from inaccurate splits, which we address statistically by leveraging the continuity of vorticity lines across the split boundaries. Our findings demonstrate a significant improvement in both the separation of vortices and the mitigation of inaccurate splits compared to prior methods.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Syngas conversion to higher alcohols via wood-framed Cu/Co-carbon catalyst
Authors:
Guihua Yan,
Paulina Pršlja,
Gaofeng Chen,
Jiahui Kang,
Yongde Liu,
Miguel A. Caro,
Xi Chen,
Xianhai Zeng,
Bo Peng
Abstract:
Syngas conversion into higher alcohols represents a promising avenue for transforming coal or biomass into liquid fuels. However, the commercialization of this process has been hindered by the high cost, low activity, and inadequate C$_{2+}$OH selectivity of catalysts. Herein, we have developed Cu/Co carbon wood catalysts, offering a cost-effective and stable alternative with exceptional selectivi…
▽ More
Syngas conversion into higher alcohols represents a promising avenue for transforming coal or biomass into liquid fuels. However, the commercialization of this process has been hindered by the high cost, low activity, and inadequate C$_{2+}$OH selectivity of catalysts. Herein, we have developed Cu/Co carbon wood catalysts, offering a cost-effective and stable alternative with exceptional selectivity for catalytic conversion. The formation of Cu/Co nanoparticles was found, influenced by water-1,2-propylene glycol ratios in the solution, resulting in bidisperse nanoparticles. The catalyst exhibited a remarkable CO conversion rate of 74.8% and a selectivity of 58.7% for C$_{2+}$OH, primarily comprising linear primary alcohols. This catalyst demonstrated enduring stability and selectivity under industrial conditions, maintaining its efficacy for up to 350 h of operation. We also employed density functional theory (DFT) to analyze selectivity, particularly focusing on the binding strength of CO, a crucial precursor for subsequent reactions leading to the formation of CH$_3$OH. DFT identified the pathway of CH$_x$ and CO coupling, ultimately yielding C$_2$H$_5$OH. This computational understanding, coupled with high performance of the Cu/Co-carbon wood catalyst, paves ways for the development of catalytically selective materials tailored for higher alcohols production, thereby ushering in new possibility in this field.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
A multiscale hybrid Maxwellian-Monte-Carlo Coulomb collision algorithm for particle simulations
Authors:
G. Chen,
A. J. Stanier,
L. Chacón,
S. E. Anderson,
B. Philip
Abstract:
Coulomb collisions in particle simulations for weakly coupled plasmas are modeled by the Landau-Fokker-Planck equation, which is typically solved by Monte-Carlo (MC) methods. One of the main disadvantages of MC is the timestep accuracy constraint νΔt << 1 to resolve the collision frequency ν. The constraint becomes extremely stringent for self-collisions in the presence of high charge state specie…
▽ More
Coulomb collisions in particle simulations for weakly coupled plasmas are modeled by the Landau-Fokker-Planck equation, which is typically solved by Monte-Carlo (MC) methods. One of the main disadvantages of MC is the timestep accuracy constraint νΔt << 1 to resolve the collision frequency ν. The constraint becomes extremely stringent for self-collisions in the presence of high charge state species and for inter-species collisions with large mass disparities (such as present in Inertial Confinement Fusion hohlraums), rendering long-time-scale simulations prohibitively expensive or impractical. To overcome these difficulties, we explore a hybrid Maxwellian-MC (HMMC) model for particle simulations. Specifically, we devise a collisional algorithm that describes weakly collisional species with particles, and highly collisional species and fluid components with Maxwellians. We employ the Lemons method for particle-Maxwellian collisions, enhanced with a more careful treatment of low-relative-speed particles, and a five-moment model for Maxwellian-Maxwellian collisions. Particle-particle binary collisions are dealt with classic Takizuka-Abe MC, which we extend to accommodate arbitrary particle weights to deal with large density disparities without compromising conservation properties. HMMC is strictly conservative and significantly outperforms standard MC methods in situations with large mass disparities among species or large charge states, demonstrating orders of magnitude improvement in computational efficiency. We will substantiate the accuracy and performance of the proposed method with several examples of varying complexity, including both zero-dimensional relaxation and one-dimensional transport problems, the latter using a hybrid kinetic-ion/fluid-electron model.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Machine learning disentangles bias causes of shortwave cloud radiative effect in a climate model
Authors:
Hongtao Yang,
Guoxing Chen,
Wei-Chyung Wang,
Qing Bao,
Jiandong Li
Abstract:
Large bias exists in shortwave cloud radiative effect (SWCRE) of general circulation models (GCMs), attributed mainly to the combined effect of cloud fraction and water contents, whose representations in models remain challenging. Here we show an effective machine-learning approach to dissect the individual bias of relevant cloud parameters determining SWCRE. A surrogate model for calculating SWCR…
▽ More
Large bias exists in shortwave cloud radiative effect (SWCRE) of general circulation models (GCMs), attributed mainly to the combined effect of cloud fraction and water contents, whose representations in models remain challenging. Here we show an effective machine-learning approach to dissect the individual bias of relevant cloud parameters determining SWCRE. A surrogate model for calculating SWCRE was developed based on random forest using observations and FGOALS-f3-L simulation data of cloud fraction (CFR), cloud-solar concurrence ratio (CSC), cloud liquid and ice water paths (LWP and IWP), TOA upward clear-sky solar flux (SUC), and solar zenith angle. The model, which achieves high determination coefficient > 0.96 in the validation phase, was then used to quantify SWCRE bias associated with these parameters following the partial radiation perturbation method. The global-mean SWCRE bias (in W m-2) is contributed by CFR (+5.11), LWP (-6.58), IWP (-1.67), and CSC (+4.38), while SUC plays a minor role; the large CSC contribution highlights the importance of cloud diurnal variation. Regionally, the relative importance varies according to climate regimes. In Tropics, overestimated LWP and IWP exist over lands, while oceans exhibit underestimated CFR and CSC. In contrast, the extratropical lands and oceans have, respectively, too-small CSC and the 'too few, too bright' low-level clouds. We thus suggest that machine learning, in addition for developing GCM physical parameterizations, can also be utilized for diagnosing and understanding complex cloud-climate interactions.
△ Less
Submitted 11 May, 2024;
originally announced May 2024.
-
Realized Stable BP-N at Ambient Pressure by Phosphorus Doping
Authors:
Guo Chen,
Chengfeng Zhang,
Yuanqin Zhu,
Bingqing cao,
Jie Zhang,
Xianlong Wang
Abstract:
Black phosphorus nitrogen (BP-N) is an attractive high-energy-density material. However, high-pressure synthesized BP-N will decompose at low-pressure and cannot be quenched to ambient conditions. Finding a method to stabilize it at 0 GPa is of great significance for its practical applications. However, unlike cg-N, LP-N, and HLP-N, it is always a metastable phase at high-pressure up to 260 GPa, a…
▽ More
Black phosphorus nitrogen (BP-N) is an attractive high-energy-density material. However, high-pressure synthesized BP-N will decompose at low-pressure and cannot be quenched to ambient conditions. Finding a method to stabilize it at 0 GPa is of great significance for its practical applications. However, unlike cg-N, LP-N, and HLP-N, it is always a metastable phase at high-pressure up to 260 GPa, and decomposes into chains at 23 GPa. Here, based on the first-principles simulations, we find that P atom doping can effectively reduce the synthesis pressure of BP-N and maintain its stability at 0 GPa. Uniform distribution of P atom dopants within the layer helps maintain the structural stability of BP-N layer at 0 GPa, while interlayer electrostatic interaction induced by N-P dipoles enhances its dynamic stability by eliminating interlayer slipping. Furthermore, pressure is conducive to enhancing the stability of BP-N and its doped forms by suppressing N-chain dissociation. For the configuration with 12.5% doping concentration, a gravimetric energy density of 8.07 kJ/g can be realized, which is nearly two times higher than TNT.
△ Less
Submitted 19 June, 2024; v1 submitted 9 May, 2024;
originally announced May 2024.
-
Computation of some dispersive equations through their iterated linearisation
Authors:
Guannan Chen,
Arieh Iserles,
Karolina Kropielnicka,
Pranav Singh
Abstract:
It is often the case that, while the numerical solution of the non-linear dispersive equation $\mathrm{i}\partial_t u(t)=\mathcal{H}(u(t),t)u(t)$ represents a formidable challenge, it is fairly easy and cheap to solve closely related linear equations of the form $\mathrm{i}\partial_t u(t)=\mathcal{H}_1(t)u(t)+\widetilde{\mathcal H}_2(t)u(t)$, where…
▽ More
It is often the case that, while the numerical solution of the non-linear dispersive equation $\mathrm{i}\partial_t u(t)=\mathcal{H}(u(t),t)u(t)$ represents a formidable challenge, it is fairly easy and cheap to solve closely related linear equations of the form $\mathrm{i}\partial_t u(t)=\mathcal{H}_1(t)u(t)+\widetilde{\mathcal H}_2(t)u(t)$, where $\mathcal{H}_1(t)+\mathcal{H}_2(v,t)=\mathcal{H}(v,t)$. In that case we advocate an iterative linearisation procedure that involves fixed-point iteration of the latter equation to solve the former. A typical case is when the original problem is a nonlinear Schrödinger or Gross--Pitaevskii equation, while the `easy' equation is linear Schrödinger with time-dependent potential.
We analyse in detail the iterative scheme and its practical implementation, prove that each iteration increases the order, derive upper bounds on the speed of convergence and discuss in the case of nonlinear Schrödinger equation with cubic potential the preservation of structural features of the underlying equation: the $\mathrm{L}_2$ norm, momentum and Hamiltonian energy. A key ingredient in our approach is the use of the Magnus expansion in conjunction with Hermite quadratures, which allows effective solutions of the linearised but non-autonomous equations in an iterative fashion. The resulting Magnus--Hermite methods can be combined with a wide range of numerical approximations to the matrix exponential. The paper concludes with a number of numerical experiments, demonstrating the power of the proposed approach.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Hydrologic Cycle Weakening in Hothouse Climates
Authors:
Jiachen Liu,
Jun Yang,
Feng Ding,
Gang Chen,
Yongyun Hu
Abstract:
The hydrologic cycle has wide impacts on the ocean salinity and circulation, carbon and nitrogen cycles, and the ecosystem. Under anthropogenic global warming, previous studies showed that the intensification of the hydrologic cycle is a robust feature. Whether this trend persists in hothouse climates, however, is unknown. Here we show in climate models that mean precipitation first increases with…
▽ More
The hydrologic cycle has wide impacts on the ocean salinity and circulation, carbon and nitrogen cycles, and the ecosystem. Under anthropogenic global warming, previous studies showed that the intensification of the hydrologic cycle is a robust feature. Whether this trend persists in hothouse climates, however, is unknown. Here we show in climate models that mean precipitation first increases with rising surface temperature, but the precipitation trend reverses when the surface is hotter than ~320-330 K. This non-monotonic phenomenon is robust to the cause of warming, convection scheme, ocean dynamics, atmospheric mass, planetary rotation, gravity, and stellar spectrum. The weakening occurs because of the existence of an upper limitation of outgoing longwave emission and the continuously increasing shortwave absorption by H2O, and is consistent with atmospheric dynamics featuring the strong increase of atmospheric stratification and dramatic reduction of convective mass flux. These results have wide implications for the climate evolutions of Earth, Venus, and potentially habitable exoplanets.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Closeby Habitable Exoplanet Survey (CHES). I. Astrometric Noise and Planetary Detection Efficiency due to Stellar Spots and Faculae
Authors:
Chunhui Bao,
Jianghui Ji,
Dongjie Tan,
Guo Chen,
Xiumin Huang,
Su Wang,
Yao Dong
Abstract:
The Closeby Habitable Exoplanet Survey (CHES) is dedicated to the astrometric exploration for habitable-zone Earth-like planets orbiting solar-type stars in close proximity, achieving unprecedented micro-arcsecond precision. Given the elevated precision, thorough consideration of photocenter jitters induced by stellar activity becomes imperative. This study endeavors to model the stellar activity…
▽ More
The Closeby Habitable Exoplanet Survey (CHES) is dedicated to the astrometric exploration for habitable-zone Earth-like planets orbiting solar-type stars in close proximity, achieving unprecedented micro-arcsecond precision. Given the elevated precision, thorough consideration of photocenter jitters induced by stellar activity becomes imperative. This study endeavors to model the stellar activity of solar-type stars, compute astrometric noise, and delineate the detection limits of habitable planets within the astrometric domain. Simulations were conducted for identified primary targets of CHES, involving the generation of simulated observed data for astrometry and photometry, accounting for the impact of stellar activity. Estimation of activity levels in our samples was achieved through chromospheric activity indices, revealing that over 90% of stars exhibited photocenter jitters below 1 $μ\mathrm{as}$. Notably, certain proximate stars, such as $α$ Cen A and B, displayed more discernible noise arising from stellar activity. Subsequent tests were performed to evaluate detection performance, unveiling that stellar activity tends to have a less pronounced impact on planetary detectability for the majority of stars. Approximately 95% of targets demonstrated a detection efficiency exceeding 80%. However, for several cold stars, e.g., HD 32450 and HD 21531, with the habitable zones close to the stars, a reduction in detection efficiency was observed. These findings offer invaluable insights into the intricate interplay between stellar activity and astrometric precision, significantly advancing our understanding in the search for habitable planets.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Achieving High Yield of Perpendicular SOT-MTJ Manufactured on 300 mm Wafers
Authors:
Wenlong Yang,
Zhenghui Ji,
Yang Gao,
Kaiyuan Zhou,
Qijun Guo,
Dinggui Zeng,
Shasha Wang,
Ming Wang,
Lijie Shen,
Guilin Chen,
Yihui Sun,
Enlong Liu,
Shikun He
Abstract:
The large-scale fabrication of three-terminal magnetic tunnel junctions (MTJs) with high yield is becoming increasingly crucial, especially with the growing interest in spin-orbit torque (SOT) magnetic random access memory (MRAM) as the next generation of MRAM technology. To achieve high yield and consistent device performance in MTJs with perpendicular magnetic anisotropy, an integration flow has…
▽ More
The large-scale fabrication of three-terminal magnetic tunnel junctions (MTJs) with high yield is becoming increasingly crucial, especially with the growing interest in spin-orbit torque (SOT) magnetic random access memory (MRAM) as the next generation of MRAM technology. To achieve high yield and consistent device performance in MTJs with perpendicular magnetic anisotropy, an integration flow has been developed that incorporates special MTJ etching technique and other CMOS-compatible processes on a 300 mm wafer manufacturing platform. Systematic studies have been conducted on device performance and statistical uniformity, encompassing magnetic properties, electrical switching behavior, and reliability. Achievements include a switching current of 680 uA at 2 ns, a TMR as high as 119%, ultra-high endurance (over 1012 cycles), and excellent uniformity in the fabricated SOT-MTJ devices, with a yield of up to 99.6%. The proposed integration process, featuring high yield, is anticipated to streamline the mass production of SOT-MRAM.
△ Less
Submitted 13 April, 2024;
originally announced April 2024.
-
Enhancing single-atom loading in tightly confined dipole traps with ancillary dipole beam
Authors:
Guang-Jie Chen,
Zhu-Bo Wang,
Chenyue Gu,
Dong Zhao,
Ji-Zhe Zhang,
Yan-Lei Zhang,
Chun-Hua Dong,
Kun Huang,
Guang-Can Guo,
Chang-Ling Zou
Abstract:
Single atoms trapped in tightly focused optical dipole traps provide an excellent experimental platform for quantum computing, precision measurement, and fundamental physics research. In this work, we propose and demonstrate a novel approach to enhancing the loading of single atoms by introducing a weak ancillary dipole beam. The loading rate of single atoms in a dipole trap can be significantly i…
▽ More
Single atoms trapped in tightly focused optical dipole traps provide an excellent experimental platform for quantum computing, precision measurement, and fundamental physics research. In this work, we propose and demonstrate a novel approach to enhancing the loading of single atoms by introducing a weak ancillary dipole beam. The loading rate of single atoms in a dipole trap can be significantly improved by only a few tens of microwatts of counter-propagating beam. It was also demonstrated that multiple atoms could be loaded with the assistance of a counter-propagating beam. By reducing the power requirements for trapping single atoms and enabling the trapping of multiple atoms, our method facilitates the extension of single-atom arrays and the investigation of collective light-atom interactions.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Four-Dimensional Phase-Space Reconstruction of Flat and Magnetized Beams Using Neural Networks and Differentiable Simulations
Authors:
Seongyeol Kim,
Juan Pablo Gonzalez-Aguilera,
Philippe Piot,
Gongxiaohui Chen,
Scott Doran,
Young-Kee Kim,
Wanming Liu,
Charles Whiteford,
Eric Wisniewski,
Auralee Edelen,
Ryan Roussel,
John Power
Abstract:
Beams with cross-plane coupling or extreme asymmetries between the two transverse phase spaces are often encountered in particle accelerators. Flat beams with large transverse-emittance ratios are critical for future linear colliders. Similarly, magnetized beams with significant cross-plane coupling are expected to enhance the performance of electron cooling in hadron beams. Preparing these beams…
▽ More
Beams with cross-plane coupling or extreme asymmetries between the two transverse phase spaces are often encountered in particle accelerators. Flat beams with large transverse-emittance ratios are critical for future linear colliders. Similarly, magnetized beams with significant cross-plane coupling are expected to enhance the performance of electron cooling in hadron beams. Preparing these beams requires precise control and characterization of the four-dimensional transverse phase space. In this study, we employ generative phase space reconstruction (GPSR) techniques to rapidly characterize magnetized and flat-beam phase-space distributions using a conventional quadrupole-scan method. The reconstruction technique is experimentally demonstrated on an electron beam produced at the Argonne Wakefield Accelerator and successfully benchmarked against conventional diagnostics techniques. Specifically, we show that predicted beam parameters from the reconstructed phase-space distributions (e.g. as magnetization and flat beam emittances) are in excellent agreement with those measured from the conventional diagnostic methods.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
A Principle of Maximum Entropy for the Navier-Stokes Equations
Authors:
Gui-Qiang G. Chen,
James Glimm,
Hamid Said
Abstract:
A principle of maximum entropy is proposed in the context of viscous incompressible flow in Eulerian coordinates. The relative entropy functional, defined over the space of $L^2$ divergence-free velocity fields, is maximized relative to alternate measures supported over the energy--enstrophy surface. Since thermodynamic equilibrium distributions are characterized by maximum entropy, connections ar…
▽ More
A principle of maximum entropy is proposed in the context of viscous incompressible flow in Eulerian coordinates. The relative entropy functional, defined over the space of $L^2$ divergence-free velocity fields, is maximized relative to alternate measures supported over the energy--enstrophy surface. Since thermodynamic equilibrium distributions are characterized by maximum entropy, connections are drawn with stationary statistical solutions of the incompressible Navier-Stokes equations. Special emphasis is on the correspondence with the final statistics described by Kolmogorov's theory of fully developed turbulence.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
Sub-GeV events energy reconstruction with 3-inch PMTs in JUNO
Authors:
Siyuan Zhang,
Yongbo Huang,
Miao He,
Chengfeng Yang,
Guoming Chen
Abstract:
A 20-kiloton liquid scintillator detector is designed in the Jiangmen Underground Neutrino Observatory (JUNO) for multiple physics purposes, including the determination of the neutrino mass ordering through reactor neutrinos, as well as measuring supernova neutrinos, solar neutrinos, and atmosphere neutrinos to explore different physics topics. Efficient reconstruction algorithms are needed to ach…
▽ More
A 20-kiloton liquid scintillator detector is designed in the Jiangmen Underground Neutrino Observatory (JUNO) for multiple physics purposes, including the determination of the neutrino mass ordering through reactor neutrinos, as well as measuring supernova neutrinos, solar neutrinos, and atmosphere neutrinos to explore different physics topics. Efficient reconstruction algorithms are needed to achieve these physics goals in a wide energy range from MeV to GeV. In this paper, we present a novel method for reconstructing the energy of events using hit information from 25600 3-inch photomultiplier tubes (PMTs) and the OCCUPANCY method. Our algorithm exhibits good performance in accurate energy reconstruction, validated with electron Monte Carlo samples spanning kinetic energies from 10 MeV to 1 GeV.
△ Less
Submitted 16 February, 2024;
originally announced February 2024.
-
Linear stability and spectral modal decomposition of three-dimensional turbulent wake flow of a generic high-speed train
Authors:
Xiao-Bai Li,
Simon Demange,
Guang Chen,
Jia-Bin Wang,
Xi-Feng Liang,
Oliver T. Schmidt,
Kilian Oberleithner
Abstract:
This work investigates the spatio-temporal evolution of coherentstructures in the wake of a generic high-speed train. Spectral properorthogonal decomposition is used to extract energy spectra and empiricalmodes of the fluctuating field. The spectrum of the symmetriccomponent shows overall higher energy and more pronounced low-rankbehavior compared to the antisymmetric one, with the most dominantsy…
▽ More
This work investigates the spatio-temporal evolution of coherentstructures in the wake of a generic high-speed train. Spectral properorthogonal decomposition is used to extract energy spectra and empiricalmodes of the fluctuating field. The spectrum of the symmetriccomponent shows overall higher energy and more pronounced low-rankbehavior compared to the antisymmetric one, with the most dominantsymmetric mode at $ω=3.437$ characterized by vortex sheddingin the near wake and constant streamwise wavenumber structures in thefar wake. The mode bispectrum further reveals the dominant role of selfinteraction of the symmetric component, leading to first harmonic andsubharmonic triads of the fundamental frequency. Then, the stability ofthe wake flow is analyzed based on two-dimensional local analysis. Theabsolute frequency of the near-wake eigenmode is determined based onspatio-temporal analysis, then tracked along the streamwise direction tofind out the global frequency, which indicate a marginally stable globalmode oscillating at a frequency very close to the dominant SPOD mode.The global mode wavemaker is then located, and the structuralsensitivity is calculated based on the direct and adjoint modes derivedfrom a local spatial analysis, with the maximum value localized withinthe recirculation region close to the train tail. Finally, the global modeshape is computed by tracking the most spatially unstable eigenmode,and the alignment with the SPOD mode is computed as a function ofstreamwise location. By combining data-driven and theoreticalapproaches, the mechanisms of coherent structures in complex wakeflows are well identified and isolated.
△ Less
Submitted 24 January, 2024; v1 submitted 23 January, 2024;
originally announced January 2024.
-
Demonstration of a low loss, highly stable and re-useable edge coupler for high heralding efficiency and low g^(2) (0) SOI correlated photon pair sources
Authors:
Jinyi Du,
George F. R. Chen,
Hongwei Gao,
James A. Grieve,
Dawn T. H. Tan,
Alexander Ling
Abstract:
We report a stable, low loss method for coupling light from silicon-on-insulator (SOI) photonic chips into optical fibers. The technique is realized using an on-chip tapered waveguide and a cleaved small core optical fiber. The on-chip taper is monolithic and does not require a patterned cladding, thus simplifying the chip fabrication process. The optical fiber segment is composed of a centimeter-…
▽ More
We report a stable, low loss method for coupling light from silicon-on-insulator (SOI) photonic chips into optical fibers. The technique is realized using an on-chip tapered waveguide and a cleaved small core optical fiber. The on-chip taper is monolithic and does not require a patterned cladding, thus simplifying the chip fabrication process. The optical fiber segment is composed of a centimeter-long small core fiber (UHNA7) which is spliced to SMF-28 fiber with less than -0.1 dB loss. We observe an overall coupling loss of -0.64 dB with this design. The chip edge and fiber tip can be butt coupled without damaging the on-chip taper or fiber. Friction between the surfaces maintains alignment leading to an observation of +-0.1 dB coupling fluctuation during a ten-day continuous measurement without use of any adhesive. This technique minimizes the potential for generating Raman noise in the fiber, and has good stability compared to coupling strategies based on longer UHNA fibers or fragile lensed fibers. We also applied the edge coupler on a correlated photon pair source and observed a raw coincidence count rate of 1.21 million cps and raw heralding efficiency of 21.3%. We achieved an auto correlation function g^(2) (0) as low as 0.0004 at the low pump power regime.
△ Less
Submitted 14 March, 2024; v1 submitted 28 December, 2023;
originally announced December 2023.
-
Quantum simulation of highly-oscillatory many-body Hamiltonians for near-term devices
Authors:
Guannan Chen,
Mohammadali Foroozandeh,
Chris Budd,
Pranav Singh
Abstract:
We develop a fourth-order Magnus expansion based quantum algorithm for the simulation of many-body problems involving two-level quantum systems with time-dependent Hamiltonians, $\mathcal{H}(t)$. A major hurdle in the utilization of the Magnus expansion is the appearance of a commutator term which leads to prohibitively long circuits. We present a technique for eliminating this commutator and find…
▽ More
We develop a fourth-order Magnus expansion based quantum algorithm for the simulation of many-body problems involving two-level quantum systems with time-dependent Hamiltonians, $\mathcal{H}(t)$. A major hurdle in the utilization of the Magnus expansion is the appearance of a commutator term which leads to prohibitively long circuits. We present a technique for eliminating this commutator and find that a single time-step of the resulting algorithm is only marginally costlier than that required for time-stepping with a time-independent Hamiltonian, requiring only three additional single-qubit layers. For a large class of Hamiltonians appearing in liquid-state nuclear magnetic resonance (NMR) applications, we further exploit symmetries of the Hamiltonian and achieve a surprising reduction in the expansion, whereby a single time-step of our fourth-order method has a circuit structure and cost that is identical to that required for a fourth-order Trotterized time-stepping procedure for time-independent Hamiltonians. Moreover, our algorithms are able to take time-steps that are larger than the wavelength of oscillation of the time-dependent Hamiltonian, making them particularly suited for highly-oscillatory controls. The resulting quantum circuits have shorter depths for all levels of accuracy when compared to first and second-order Trotterized methods, as well as other fourth-order Trotterized methods, making the proposed algorithm a suitable candidate for simulation of time-dependent Hamiltonians on near-term quantum devices.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Vanishing Mach Number Limit of Stochastic Compressible Flows
Authors:
Gui-Qiang G. Chen,
Michele Coti Zelati,
Chin Ching Yeung
Abstract:
We study the vanishing Mach number limit for the stochastic Navier-Stokes equations with $γ$-type pressure laws, with focus on the one-dimensional case. We prove that, if the stochastic term vanishes with respect to the Mach number sufficiently fast, the deviation from the incompressible state of the solutions (for $γ\geq 1$) and the invariant measures (for $γ= 1$) is governed by a linear stochast…
▽ More
We study the vanishing Mach number limit for the stochastic Navier-Stokes equations with $γ$-type pressure laws, with focus on the one-dimensional case. We prove that, if the stochastic term vanishes with respect to the Mach number sufficiently fast, the deviation from the incompressible state of the solutions (for $γ\geq 1$) and the invariant measures (for $γ= 1$) is governed by a linear stochastic acoustic system in the limit. In particular, the critically sufficient decay rate for the stochastic term is slower than the corresponding results with deterministic external forcing due to the martingale structure of the noise term, and the blow-up of the noise term for the fluctuation system can be allowed.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Hartree-Fock-Bogoliubov theory for number-parity--violating fermionic Hamiltonians
Authors:
Thomas M. Henderson,
Shadan Ghassemi Tabrizi,
Guo P. Chen,
Gustavo E. Scuseria
Abstract:
It is usually asserted that physical Hamiltonians for fermions must contain an even number of fermion operators. This is indeed true in electronic structure theory. However, when the Jordan-Wigner transformation is used to map physical spin Hamiltonians to Hamiltonians of spinless fermions, terms which contain an odd number of fermion operators may appear. The resulting fermionic Hamiltonian thus…
▽ More
It is usually asserted that physical Hamiltonians for fermions must contain an even number of fermion operators. This is indeed true in electronic structure theory. However, when the Jordan-Wigner transformation is used to map physical spin Hamiltonians to Hamiltonians of spinless fermions, terms which contain an odd number of fermion operators may appear. The resulting fermionic Hamiltonian thus does not have number parity symmetry, and requires wave functions which do not have this symmetry either. In this work, we discuss the extension of standard Hartree-Fock-Bogoliubov (HFB) theory to the number-parity--nonconserving case. These ideas had appeared in the literature before, but, perhaps for lack of practical applications, had to the best of our knowledge never been employed. We here present a useful application for this more general HFB theory based on coherent states of the SO(2$M$ + 1) Lie group, where $M$ is the number of orbitals. We also show how using these unusual mean-field states can provide significant improvements when studying the Jordan-Wigner transformation of chemically relevant spin Hamiltonians.
△ Less
Submitted 8 January, 2024; v1 submitted 20 November, 2023;
originally announced November 2023.
-
An Integrated Multi-Physics Optimization Framework for Particle Accelerator Design
Authors:
Gongxiaohui Chen,
Tyler H. Chang,
John Power,
Chungunag Jing
Abstract:
The overarching goal of beamline design is to achieve a high brightness electron beam from the beamline. Traditional beamline design studies involved separate optimizations of radio-frequency cavities, magnets, and beam dynamics using different codes and pursuing various intermediate objectives. In this work, we present a novel unified global optimization framework that integrates multiple physics…
▽ More
The overarching goal of beamline design is to achieve a high brightness electron beam from the beamline. Traditional beamline design studies involved separate optimizations of radio-frequency cavities, magnets, and beam dynamics using different codes and pursuing various intermediate objectives. In this work, we present a novel unified global optimization framework that integrates multiple physics modules for beamline design as simulation functions for a two-stage global optimization solver.
△ Less
Submitted 18 October, 2023;
originally announced November 2023.
-
Photomolecular Effect: Visible Light Interaction with Air-Water Interface
Authors:
Guangxin Lv,
Yaodong Tu,
James H. Zhang,
Gang Chen
Abstract:
Although water is almost transparent to visible light, we demonstrate that the air-water interface interacts strongly with visible light via what we hypothesize as the photomolecular effect. In this effect, transverse-magnetic polarized photons cleave off water clusters from the air-water interface. We use over 10 different experiments to demonstrate the existence of this effect and its dependence…
▽ More
Although water is almost transparent to visible light, we demonstrate that the air-water interface interacts strongly with visible light via what we hypothesize as the photomolecular effect. In this effect, transverse-magnetic polarized photons cleave off water clusters from the air-water interface. We use over 10 different experiments to demonstrate the existence of this effect and its dependence on the wavelength, incident angle and polarization of visible light. We further demonstrate that visible light heats up thin fogs, suggesting that this process can impact weather, climate, and the earth's water cycle. Our study suggests that the photomolecular effect should happen widely in nature, from clouds to fogs, ocean to soil surfaces, and plant transpiration, and can also lead to new applications in energy and clear water.
△ Less
Submitted 28 October, 2023;
originally announced October 2023.
-
Stability of Inverse Problems for Steady Supersonic Flows Past Lipschitz Perturbed Cones
Authors:
Gui-Qiang G. Chen,
Yun Pu,
Yongqian Zhang
Abstract:
We are concerned with inverse problems for supersonic potential flows past infinite axisymmetric Lipschitz cones. The supersonic flows under consideration are governed by the steady isentropic Euler equations for axisymmetric potential flows, which involve a singular geometric source term. We first study the inverse problem for the stability of an oblique conical shock as an initial-boundary value…
▽ More
We are concerned with inverse problems for supersonic potential flows past infinite axisymmetric Lipschitz cones. The supersonic flows under consideration are governed by the steady isentropic Euler equations for axisymmetric potential flows, which involve a singular geometric source term. We first study the inverse problem for the stability of an oblique conical shock as an initial-boundary value problem with both the generating curve of the cone surface and the leading conical shock front as free boundaries. We then establish the existence and asymptotic behavior of global entropy solutions with bounded BV norm of this problem, when the Mach number of the incoming flow is sufficiently large and the total variation of the pressure distribution on the cone is sufficiently small. To this end, we first develop a modified Glimm-type scheme to construct approximate solutions by self-similar solutions as building blocks to balance the influence of the geometric source term. Then we define a Glimm-type functional, based on the local interaction estimates between weak waves, the strong leading conical shock, and self-similar solutions, along with the construction of the approximate generating curves of the cone surface. Next, when the Mach number of the incoming flow is sufficiently large, by asymptotic analysis of the reflection coefficients in those interaction estimates, we prove that appropriate weights can be chosen so that the corresponding Glimm-type functional decreases in the flow direction. Finally, we determine the generating curves of the cone surface and establish the existence of global entropy solutions containing a strong leading conical shock, besides weak waves. Moreover, the entropy solution is proved to approach asymptotically the self-similar solution determined by the incoming flow and the asymptotic pressure on the cone surface at infinity.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
Morawetz's Contributions to the Mathematical Theory of Transonic Flows, Shock Waves, and Partial Differential Equations of Mixed Type
Authors:
Gui-Qiang G. Chen
Abstract:
This article is a survey of Cathleen Morawetz's contributions to the mathematical theory of transonic flows, shock waves, and partial differential equations of mixed elliptic-hyperbolic type. The main focus is on Morawetz's fundamental work on the non-existence of continuous transonic flows past profiles, Morawetz's program regarding the construction of global steady weak transonic flow solutions…
▽ More
This article is a survey of Cathleen Morawetz's contributions to the mathematical theory of transonic flows, shock waves, and partial differential equations of mixed elliptic-hyperbolic type. The main focus is on Morawetz's fundamental work on the non-existence of continuous transonic flows past profiles, Morawetz's program regarding the construction of global steady weak transonic flow solutions past profiles via compensated compactness, and a potential theory for regular and Mach reflection of a shock at a wedge. The profound impact of Morawetz's work on recent developments and breakthroughs in these research directions and related areas in pure and applied mathematics are also discussed.
△ Less
Submitted 20 October, 2023; v1 submitted 10 October, 2023;
originally announced October 2023.
-
Deep generative model conditioned by phase picks for synthesizing labeled seismic waveforms with limited data
Authors:
Guoyi Chen,
Junlun Li,
Hao Guo
Abstract:
Shortage of labeled seismic field data poses a significant challenge for deep-learning related applications in seismology. One approach to mitigate this issue is to use synthetic waveforms as a complement to field data. However, traditional physics-driven methods for synthesizing data are computationally expensive and often fail to capture complex features in real seismic waveforms. In this study,…
▽ More
Shortage of labeled seismic field data poses a significant challenge for deep-learning related applications in seismology. One approach to mitigate this issue is to use synthetic waveforms as a complement to field data. However, traditional physics-driven methods for synthesizing data are computationally expensive and often fail to capture complex features in real seismic waveforms. In this study, we develop a deep-learning-based generative model, PhaseGen, for synthesizing realistic seismic waveforms dictated by provided P- and S-wave arrival labels. Contrary to previous generative models which require a large amount of data for training, the proposed model can be trained with only 100 seismic events recorded by a single seismic station. The fidelity, diversity and alignment for waveforms synthesized by PhaseGen with diverse P- and S-wave arrival labels are quantitatively evaluated. Also, PhaseGen is used to augment a labelled seismic dataset used for training a deep neural network for the phase picking task, and it is found that the picking capability trained with the augmented dataset is unambiguously improved. It is expected that PhaseGen can offer a valuable alternative for synthesizing realistic waveforms and provide a promising solution for the lack of labeled seismic data.
△ Less
Submitted 2 October, 2023; v1 submitted 20 September, 2023;
originally announced September 2023.
-
On Paradoxical Phenomena During Evaporation and Condensation between Two Parallel Plates
Authors:
Gang Chen
Abstract:
Kinetic theory has long predicted that temperature inversion may happen in the vapor-phase for evaporation and condensation between two parallel plates, i.e., the vapor temperature at the condensation interface is higher than that at the evaporation interface. However, past studies have neglected transport in the liquid phases, which usually determine the evaporation and condensation rates. This d…
▽ More
Kinetic theory has long predicted that temperature inversion may happen in the vapor-phase for evaporation and condensation between two parallel plates, i.e., the vapor temperature at the condensation interface is higher than that at the evaporation interface. However, past studies have neglected transport in the liquid phases, which usually determine the evaporation and condensation rates. This disconnect has limited the acceptance of the kinetic theory in practical heat transfer models. In this paper, we combine interfacial conditions for mass and heat fluxes with continuum descriptions in the bulk regions of the vapor and the liquid phases to obtain a complete picture for the classical problem of evaporation and condensation between two parallel plates. The criterion for temperature inversion is rederived analytically. We also prove that the temperature jump at each interface is in the same direction as externally applied temperature difference, i.e., liquid surface is at a higher temperature than its adjacent vapor on the evaporating interface and at a lower temperature than its adjacent vapor on the condensing interface. We explain the interfacial temperature jump and temperature inversion using the interfacial cooling and heating processes, and we predict that this process can lead to a vapor phase temperature much lower than the lowest wall temperatures and much higher than the highest wall temperature imposed. When the latent heat of evaporation is small, we found that evaporation can happen at the low temperature side while condensation occur at the high temperature side, opposing the temperature gradient.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Interfacial cooling and heating, temperature discontinuity and inversion in evaporation and condensation
Authors:
Gang Chen
Abstract:
Although ubiquitous in nature and industrial processes, transport processes at the interface during evaporation and condensation are still poorly understood. Experiments have shown temperature discontinuities at the interface during evaporation and condensation but the experimentally reported interface temperature jump varies by two orders of magnitude. Even the direction of such temperature jump…
▽ More
Although ubiquitous in nature and industrial processes, transport processes at the interface during evaporation and condensation are still poorly understood. Experiments have shown temperature discontinuities at the interface during evaporation and condensation but the experimentally reported interface temperature jump varies by two orders of magnitude. Even the direction of such temperature jump is still being debated. Using kinetic-theory based expressions for the interfacial mass flux and heat flux, we solve coupled problem between the liquid and the vapor phase during evaporation and condensation. Our model shows that when evaporation or condensation happens, an intrinsic temperature difference develops across the interface, due to the mismatch of the enthalpy carried by vapor at the interface and the bulk region. The vapor temperature near the interface cools below the saturation temperature on the liquid surface during evaporation and heats up above the latter during condensation. However, many existing experiments have shown an opposite trend to this prediction. We explain this difference as arising from the reverse heat conduction in the vapor phase. Our model results compare favorably with experiments on both evaporation and condensation. We show that when the liquid layer is very thin, most of the applied temperature difference between the solid wall and the vapor phase happens at the liquid-vapor interface, leading to saturation of the evaporation and the condensation rates and the corresponding heat transfer rate. This result contradicts current belief that the evaporation and condensation rates are inversely proportional to the liquid film thickness.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
Rethinking loss of available work and Gouy-Stodola theorem
Authors:
Yaodong Tu,
Gang Chen
Abstract:
Exergy represents the maximum useful work possible when a system at a specific state reaches equilibrium with the environmental dead state at temperature To. Correspondingly, the exergy difference between two states is the maximum work output when the system changes from one state to the other, assuming that during the processes, the system exchanges heat reversibly with the environment. If the pr…
▽ More
Exergy represents the maximum useful work possible when a system at a specific state reaches equilibrium with the environmental dead state at temperature To. Correspondingly, the exergy difference between two states is the maximum work output when the system changes from one state to the other, assuming that during the processes, the system exchanges heat reversibly with the environment. If the process involves irreversibility, the Guoy-Stodola theorem states that the exergy destruction equals the entropy generated during the process multiplied by To. The exergy concept and the Gouy-Stodola theorem are widely used to optimize processes or systems, even when they are not directly connected to the environment. In the past, questions have been raised on if To is the proper temperature to use in calculating the exergy destruction. Here, we start from the first and the second laws of thermodynamics to unambiguously show that the useful energy loss (UEL) of a system or process should equal to the entropy generation multiplied by an equivalent temperature associated with the entropy rejected out of the entire system. For many engineering systems and processes, this entropy rejection temperature can be easily calculated as the ratio of the changes of the enthalpy and entropy of the fluid stream carrying the entropy out, which we call the state-change temperature. The UEL is unambiguous and independent of the environmental dead state, and it should be used for system optimization rather than the exergy destruction.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity
Authors:
T. B. Petersen,
M. P. Kelly,
T. Reid,
M. Kedzie,
B. Guilfoyle,
G. Chen,
S. Posen,
B. Tennis,
G. Eremeev
Abstract:
A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobiumtin has been established as a promising next generation SRF material, but development has focused primarily in high-beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarte…
▽ More
A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobiumtin has been established as a promising next generation SRF material, but development has focused primarily in high-beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarter wave cavities (that are subsequently smaller) as well as for significantly lowered cooling requirements (possibly leading to cryocooler based designs). The fabrication, initial cold testing, and Nb3Sn coating are discussed as well as test plans and details of future applications.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Deep learning-based reduced order model for three-dimensional unsteady flow using mesh transformation and stitching
Authors:
Xin Li,
Zhiwen Deng,
Rui Feng,
Ziyang Liu,
Renkun Han,
Hongsheng Liu,
Gang Chen
Abstract:
Artificial intelligence-based three-dimensional(3D) fluid modeling has gained significant attention in recent years. However, the accuracy of such models is often limited by the processing of irregular flow data. In order to bolster the credibility of near-wall flow prediction, this paper presents a deep learning-based reduced order model for three-dimensional unsteady flow using the transformatio…
▽ More
Artificial intelligence-based three-dimensional(3D) fluid modeling has gained significant attention in recent years. However, the accuracy of such models is often limited by the processing of irregular flow data. In order to bolster the credibility of near-wall flow prediction, this paper presents a deep learning-based reduced order model for three-dimensional unsteady flow using the transformation and stitching of multi-block structured meshes. To begin with, full-order flow data is provided by numerical simulations that rely on multi-block structured meshes. A mesh transformation technique is applied to convert each structured grid with data into a corresponding uniform and orthogonal grid, which is subsequently stitched and filled. The resulting snapshots in the transformed domain contain accurate flow information for multiple meshes and can be directly fed into a structured neural network without requiring any interpolation operation. Subsequently, a network model based on a fully convolutional neural network is constructed to predict flow dynamics accurately. To validate the strategy's feasibility, the flow around a sphere with Re=300 was investigated, and the results obtained using traditional Cartesian interpolation were used as the baseline for comparison. All the results demonstrate the preservation and accurate prediction of flow details near the wall, with the pressure correlation coefficient on the wall achieving an impressive value of 0.9985. Moreover, the periodic behavior of flow fields can be faithfully predicted during long-term inference.
△ Less
Submitted 14 July, 2023;
originally announced July 2023.
-
Global Solutions of the Two-Dimensional Riemann Problem with Four-Shock Interactions for the Euler Equations for Potential Flow
Authors:
Gui-Qiang G. Chen,
Alexander Cliffe,
Feimin Huang,
Song Liu,
Qin Wang
Abstract:
We present a rigorous approach and related techniques to construct global solutions of the 2-D Riemann problem with four-shock interactions for the Euler equations for potential flow. With the introduction of three critical angles: the vacuum critical angle from the compatibility conditions, the detachment angle, and the sonic angle, we clarify all configurations of the Riemann solutions for the i…
▽ More
We present a rigorous approach and related techniques to construct global solutions of the 2-D Riemann problem with four-shock interactions for the Euler equations for potential flow. With the introduction of three critical angles: the vacuum critical angle from the compatibility conditions, the detachment angle, and the sonic angle, we clarify all configurations of the Riemann solutions for the interactions of two-forward and two-backward shocks, including the subsonic-subsonic reflection configuration that has not emerged in previous results. To achieve this, we first identify the three critical angles that determine the configurations, whose existence and uniqueness follow from our rigorous proof of the strict monotonicity of the steady detachment and sonic angles for 2-D steady potential flow with respect to the Mach number of the upstream state. Then we reformulate the 2-D Riemann problem into the shock reflection-diffraction problem with respect to a symmetric line, along with two independent incident angles and two sonic boundaries varying with the choice of incident angles. With these, the problem can be further reformulated as a free boundary problem for a second-order quasilinear equation of mixed elliptic-hyperbolic type. The difficulties arise from the degenerate ellipticity of the nonlinear equation near the sonic boundaries, the nonlinearity of the free boundary condition, the singularity of the solution near the corners of the domain, and the geometric properties of the free boundary. To the best of our knowledge, this is the first rigorous result for the 2-D Riemann problem with four-shock interactions for the Euler equations. The approach and techniques developed for the Riemann problem for four-wave interactions should be useful for solving other 2-D Riemann problems for more general Euler equations and related nonlinear hyperbolic systems of conservation laws.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Proposal of a free-space-to-chip pipeline for transporting single atoms
Authors:
Aiping Liu,
Jiawei Liu,
Zhanfei Kang,
Guang-Jie Chen,
Xin-Biao Xu,
Xifeng Ren,
Guang-Can Guo,
Qin Wang,
Chang-Ling Zou
Abstract:
A free-space-to-chip pipeline is proposed to efficiently transport single atoms from a magneto-optical trap to an on-chip evanescent field trap. Due to the reflection of the dipole laser on the chip surface, the conventional conveyor belt approach can only transport atoms close to the chip surface but with a distance of about one wavelength, which prevents efficient interaction between the atom an…
▽ More
A free-space-to-chip pipeline is proposed to efficiently transport single atoms from a magneto-optical trap to an on-chip evanescent field trap. Due to the reflection of the dipole laser on the chip surface, the conventional conveyor belt approach can only transport atoms close to the chip surface but with a distance of about one wavelength, which prevents efficient interaction between the atom and the on-chip waveguide devices. Here, based on a two-layer photonic chip architecture, a diffraction beam of the integrated grating with an incident angle of the Brewster angle is utilized to realize free-space-to-chip atom pipeline. Numerical simulation verified that the reflection of the dipole laser is suppressed and that the atoms can be brought to the chip surface with a distance of only 100nm. Therefore, the pipeline allows a smooth transport of atoms from free space to the evanescent field trap of waveguides and promises a reliable atom source for a hybrid photonic-atom chip.
△ Less
Submitted 18 May, 2023;
originally announced May 2023.
-
Super-Resolution Imaging via Angular Magnification
Authors:
Yi Zhou,
Dingpeng Liao,
Kun Zhang,
Zijie Ma,
Shikai Wu,
Jun Ma,
Xuemei Dai,
Zhengguo Shang,
Zhongquan Wen,
Gang Chen
Abstract:
The far-field resolution of optical imaging systems is restricted by the Abbe diffraction limit, a direct result of the wave nature of light. One successful technological approach to circumventing this limit is to reduce the effective size of a point-spread-function. In the past decades, great endeavors have been made to engineer an effective point-spread-function by exploiting different mechanism…
▽ More
The far-field resolution of optical imaging systems is restricted by the Abbe diffraction limit, a direct result of the wave nature of light. One successful technological approach to circumventing this limit is to reduce the effective size of a point-spread-function. In the past decades, great endeavors have been made to engineer an effective point-spread-function by exploiting different mechanisms, including optical nonlinearities and structured light illumination. However, these methods are hard to be applied to objects in a far distance. Here, we propose a new way to achieve super-resolution in a far field by utilizing angular magnification. We present the first proof-of-concept demonstration of such an idea and demonstrate a new class of lenses with angular magnification for far-field super-resolution imaging. Both theoretical and experimental results demonstrate a more than two-fold enhancement beyond the angular-resolution limit in the far-field imaging. The proposed approach can be applied to super-resolution imaging of objects in far distance. It has promising potential applications in super-resolution telescopes and remote sensing.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Transporting cold atoms towards a GaN-on-sapphire chip via an optical conveyor belt
Authors:
Lei Xu,
Ling-Xiao Wang,
Guang-Jie Chen,
Liang Chen,
Yuan-Hao Yang,
Xin-Biao Xu,
Aiping Liu,
Chuan-Feng Li,
Guang-Can Guo,
Chang-Ling Zou,
Guo-Yong Xiang
Abstract:
Trapped atoms on photonic structures inspire many novel quantum devices for quantum information processing and quantum sensing. Here, we have demonstrated a hybrid photonic-atom chip platform based on a GaN-on-sapphire chip and the transport of an ensemble of atoms from free space towards the chip with an optical conveyor belt. The maximum transport efficiency of atoms is about 50% with a transpor…
▽ More
Trapped atoms on photonic structures inspire many novel quantum devices for quantum information processing and quantum sensing. Here, we have demonstrated a hybrid photonic-atom chip platform based on a GaN-on-sapphire chip and the transport of an ensemble of atoms from free space towards the chip with an optical conveyor belt. The maximum transport efficiency of atoms is about 50% with a transport distance of 500 $\mathrm{μm}$. Our results open up a new route toward the efficiently loading of cold atoms into the evanescent-field trap formed by the photonic integrated circuits, which promises strong and controllable interactions between single atoms and single photons.
△ Less
Submitted 13 May, 2023;
originally announced May 2023.
-
Point convolutional neural network algorithm for Ising model ground state research based on spring vibration
Authors:
Zhelong Jiang,
Gang Chen,
Ruixiu Qiao,
Pengcheng Feng,
Yihao Chen,
Junjia Su,
Zhiyuan Zhao,
Min Jin,
Xu Chen,
Zhigang Li,
Huaxiang Lu
Abstract:
The ground state search of the Ising model can be used to solve many combinatorial optimization problems. Under the current computer architecture, an Ising ground state search algorithm suitable for hardware computing is necessary for solving practical problems. Inspired by the potential energy conversion of springs, we propose a point convolutional neural network algorithm for ground state search…
▽ More
The ground state search of the Ising model can be used to solve many combinatorial optimization problems. Under the current computer architecture, an Ising ground state search algorithm suitable for hardware computing is necessary for solving practical problems. Inspired by the potential energy conversion of springs, we propose a point convolutional neural network algorithm for ground state search based on spring vibration model, called Spring-Ising Algorithm. Spring-Ising Algorithm regards the spin as a moving mass point connected to a spring and establish the equation of motion for all spins. Spring-Ising Algorithm can be mapped on the GPU or AI chips through the basic structure of the neural network for fast and efficient parallel computing. The algorithm has very productive results for solving the Ising model and has been test in the recognized test benchmark K2000. The algorithm introduces the concept of dynamic equilibrium to achieve a more detailed local search by dynamically adjusting the weight of the Ising model in the spring oscillation model. Finally, there is the simple hardware test speed evaluation. Spring-Ising Algorithm can provide the possibility to calculate the Ising model on a chip which focuses on accelerating neural network calculations.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Evolutionary Games on Networks: Phase Transition, Quasi-equilibrium, and Mathematical Principles
Authors:
Jiangjiang Cheng,
Wenjun Mei,
Wei Su,
Ge Chen
Abstract:
The stable cooperation ratio of spatial evolutionary games has been widely studied using simulations or approximate analysis methods. However, sometimes such ``stable'' cooperation ratios obtained via approximate methods might not be actually stable, but correspond to quasi-equilibriums instead. We find that various classic game models, like the evolutionary snowdrift game, evolutionary prisoner's…
▽ More
The stable cooperation ratio of spatial evolutionary games has been widely studied using simulations or approximate analysis methods. However, sometimes such ``stable'' cooperation ratios obtained via approximate methods might not be actually stable, but correspond to quasi-equilibriums instead. We find that various classic game models, like the evolutionary snowdrift game, evolutionary prisoner's dilemma, and spatial public goods game on square lattices and scale-free networks, exhibit the phase transition in convergence time to the equilibrium state. Moreover, mathematical principles are provided to explain the phase transition of convergence time and quasi-equilibrium of cooperation ratio. The findings explain why and when cooperation and defection have a long-term coexistence.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Robust formulation of Wick's theorem for computing matrix elements between Hartree-Fock-Bogoliubov wavefunctions
Authors:
Guo P. Chen,
Gustavo E. Scuseria
Abstract:
Numerical difficulties associated with computing matrix elements of operators between Hartree-Fock-Bogoliubov (HFB) wavefunctions have plagued the development of HFB-based many-body theories for decades. The problem arises from divisions by zero in the standard formulation of the nonorthogonal Wick's theorem in the limit of vanishing HFB overlap. In this paper, we present a robust formulation of W…
▽ More
Numerical difficulties associated with computing matrix elements of operators between Hartree-Fock-Bogoliubov (HFB) wavefunctions have plagued the development of HFB-based many-body theories for decades. The problem arises from divisions by zero in the standard formulation of the nonorthogonal Wick's theorem in the limit of vanishing HFB overlap. In this paper, we present a robust formulation of Wick's theorem that stays well-behaved regardless of whether the HFB states are orthogonal or not. This new formulation ensures cancellation between the zeros of the overlap and the poles of the Pfaffian, which appears naturally in fermionic systems. Our formula explicitly eliminates self-interaction, which otherwise causes additional numerical challenges. A computationally efficient version of our formalism enables robust symmetry-projected HFB calculations with the same computational cost as mean-field theories. Moreover, we avoid potentially diverging normalization factors by introducing a robust normalization procedure. The resulting formalism treats even and odd number of particles on equal footing and reduces to Hartree-Fock as a natural limit. As proof of concept, we present a numerically stable and accurate solution to a Jordan-Wigner-transformed Hamiltonian, whose singularities motivated the present work. Our robust formulation of Wick's theorem is a most promising development for methods using quasiparticle vacuum states.
△ Less
Submitted 8 June, 2023; v1 submitted 26 April, 2023;
originally announced April 2023.
-
Air cold atmospheric plasma with patterns for anaplastic squamous cell carcinoma treatment
Authors:
Fan Bai,
Yingjie Lu,
Yujie Zhi,
Yueye Huang,
Long Li,
Jiaoxiao Luo,
Jamoliddin Razzokov,
Olga Koval,
Maksudbek Yusupov,
Guojun Chen,
Zhitong Chen
Abstract:
In recent years, cold atmospheric plasma (CAP) using inert gas has been successfully applied for biomedicine, such as sterilization, wound healing, skin diseases, and tumor treatment. Here, we reported air cold atmospheric plasma with three different patterns (I. Non: basic square grid structure; II. Square: basic square grid structure + square node; III. Circle: basic square grid structure + circ…
▽ More
In recent years, cold atmospheric plasma (CAP) using inert gas has been successfully applied for biomedicine, such as sterilization, wound healing, skin diseases, and tumor treatment. Here, we reported air cold atmospheric plasma with three different patterns (I. Non: basic square grid structure; II. Square: basic square grid structure + square node; III. Circle: basic square grid structure + circle node) for anaplastic squamous cell carcinoma treatment (VX2 cell line). Various plasma diagnostic techniques were applied to evaluate the physics of air CAP with patterns such as discharge voltage, plasma initial generating process, plasma temperature, and optical emission spectroscopy (OES). The direct effects of air CAP with patterns on anaplastic squamous cell carcinoma treatment (VX2 cell line) were investigated in vitro. We also studied the ROS (reactive oxygen species) and RNS (reactive nitrogen species) generation in cultured media released from VX2 cells after the treatment of air CAP with patterns. The results showed that the air CAP with circle-pattern generated more active substances during at 60s treatment time, which resulted in a higher death rate of VX2 cells. These initial observations establish the air CAP with patterns as potential clinical applications for cancer therapy.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Microwave shielding of bosonic NaRb molecules
Authors:
Junyu Lin,
Guanghua Chen,
Mucan Jin,
Zhaopeng Shi,
Fulin Deng,
Wenxian Zhang,
Goulven Quéméner,
Tao Shi,
Su Yi,
Dajun Wang
Abstract:
Recent years have witnessed tremendous progresses in creating and manipulating ground-state ultracold polar molecules. However, the two-body loss regardless of the chemical reactivities is still a hurdle for many future explorations. Here, we investigate the loss suppression of non-reactive bosonic $^{23}$Na$^{87}$Rb molecules with a circular polarized microwave blue-detuned to the rotational tran…
▽ More
Recent years have witnessed tremendous progresses in creating and manipulating ground-state ultracold polar molecules. However, the two-body loss regardless of the chemical reactivities is still a hurdle for many future explorations. Here, we investigate the loss suppression of non-reactive bosonic $^{23}$Na$^{87}$Rb molecules with a circular polarized microwave blue-detuned to the rotational transition. We achieve suppression of the loss by two orders of magnitude with the lowest two-body loss rate coefficient reduced to $3\times10^{-12}~\rm{cm^3/s}$. Meanwhile, the elastic collision rate coefficient is increased to the $10^{-8}~\rm{cm^3/s}$ level. The large good-to-bad collision ratio has allowed us to carry out evaporative cooling of $^{23}$Na$^{87}$Rb with an efficiency of 1.7(2), increasing the phase-space density by a factor of 10. With further improvements, this technique holds great promises for creating a Bose-Einstein condensate of ultracold polar molecules.
△ Less
Submitted 30 April, 2023; v1 submitted 17 April, 2023;
originally announced April 2023.
-
A neural network-based scale-adaptive cloud-fraction scheme for GCMs
Authors:
Guoxing Chen,
Wei-Chyung Wang,
Shixi Yang,
Yixin Wang,
Feng Zhang,
Kun Wu
Abstract:
Cloud fraction significantly affects the short- and long-wave radiation. Its realistic representation in general circulation models (GCMs) still poses great challenges in modeling the atmosphere. Here, we present a neural network-based diagnostic scheme that uses the grid-mean temperature, pressure, liquid and ice water mixing ratios, and relative humidity to simulate the sub-grid cloud fraction.…
▽ More
Cloud fraction significantly affects the short- and long-wave radiation. Its realistic representation in general circulation models (GCMs) still poses great challenges in modeling the atmosphere. Here, we present a neural network-based diagnostic scheme that uses the grid-mean temperature, pressure, liquid and ice water mixing ratios, and relative humidity to simulate the sub-grid cloud fraction. The scheme, trained using CloudSat data with explicit consideration of grid sizes, realistically simulates the observed cloud fraction with a correlation coefficient (r) > 0.9 for liquid-, mixed-, and ice-phase clouds. The scheme also captures the observed non-monotonic relationship between cloud fraction and relative humidity and is computationally efficient, and robust for GCMs with a variety of horizontal and vertical resolutions.
For illustrative purposes, we conducted comparative analyses of the 2006-2019 climatological-mean cloud fractions among CloudSat, and simulations from the new scheme and the Xu-Randall scheme (optimized the same way as the new scheme). The network-based scheme improves not only the spatial distribution of the total cloud fraction but also the cloud vertical structure (r > 0.99). For example, the biases of too-many high-level clouds over the tropics and too-many low-level clouds over regions around 60°S and 60°N in the Xu-Randall scheme are significantly reduced. These improvements are also found to be insensitive to the spatio-temporal variability of large-scale meteorology conditions, implying that the scheme can be used in different climate regimes.
△ Less
Submitted 18 June, 2023; v1 submitted 4 April, 2023;
originally announced April 2023.
-
Tomography Scan of Charge Density Wave in NbSe2
Authors:
Jyun-Yu Wu,
Yung-Ting Lee,
Guan-Hao Chen,
Zheng-Hong Li,
Chang-Tsan Lee,
Jie-Yu Hsu,
Chia-Nung Kuo,
Juhn-Jong Lin,
Wen-Hao Chang,
Chin-Shan Lue,
Po-Tuan Cheng,
Cheng-Tien Chiang,
Chien-Cheng Kuo,
Chien-Te Wu,
Chi-Cheng Lee,
Ming-Chiang Chung,
Hung-Chung Hsueh,
Chun-Liang Lin
Abstract:
Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized.…
▽ More
Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized. Here by using scanning tunneling microscopy (STM) and density functional theory (DFT), we have monitored the evolution of 3x3 CDW along c-axis and realized a nearly tomography scan of CDW of the topmost layer. The results show that the strength of 3x3 charge order varies while increasing the tunneling current. The 3x3 charge order is relatively strong at the outermost Se level and decreases while probing in between Se and Nb levels. Interestingly, the 3x3 charge order gets strong again as reaching Nb level but along with a phase shift. We further calculated the orbital charge distributions and found that both CDW intensity modulation and phase shift are strongly correlated with the distribution of Se p orbitals and Nb d orbitals.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
Discrimination of pp solar neutrinos and $^{14}$C double pile-up events in a large-scale LS detector
Authors:
Guo-Ming Chen,
Xin Zhang,
Ze-Yuan Yu,
Si-Yuan Zhang,
Yu Xu,
Wen-Jie Wu,
Yao-Guang Wang,
Yong-Bo Huang
Abstract:
As a unique probe, precision measurement of \textit{pp} solar neutrinos is important for studying the Sun's energy mechanism, monitoring thermodynamic equilibrium, and studying neutrino oscillation in the vacuum-dominated region. For a large-scale liquid scintillator detector, one bottleneck for \textit{pp} solar neutrino detection comes from pile-up events of intrinsic $^{14}$C decays. This paper…
▽ More
As a unique probe, precision measurement of \textit{pp} solar neutrinos is important for studying the Sun's energy mechanism, monitoring thermodynamic equilibrium, and studying neutrino oscillation in the vacuum-dominated region. For a large-scale liquid scintillator detector, one bottleneck for \textit{pp} solar neutrino detection comes from pile-up events of intrinsic $^{14}$C decays. This paper presents a few approaches to discriminate \textit{pp} solar neutrinos and $^{14}$C pile-up events by considering the difference in their time and spatial distributions. In this work, a Geant4-based Monte Carlo simulation is constructed. Then multivariate analysis and deep learning technology were adopted respectively to investigate the capability of $^{14}$C pile-up reduction. As a result, the BDTG model and VGG network showed good performance in discriminating \textit{pp} solar neutrinos and $^{14}$C double pile-up events. Their signal significance can achieve 10.3 and 15.6 using only one day of statistics. In this case, the signal efficiency is 51.1\% for discrimination using the BDTG model when rejecting 99.18\% $^{14}$C double pile-up events, and the signal efficiency is 42.7\% for the case using the VGG network when rejecting 99.81\% $^{14}$C double pile-up events.
△ Less
Submitted 7 April, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
The JUNO experiment Top Tracker
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato
, et al. (592 additional authors not shown)
Abstract:
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector…
▽ More
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Marco Beretta
, et al. (592 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
DR-Label: Improving GNN Models for Catalysis Systems by Label Deconstruction and Reconstruction
Authors:
Bowen Wang,
Chen Liang,
Jiaze Wang,
Furui Liu,
Shaogang Hao,
Dong Li,
Jianye Hao,
Guangyong Chen,
Xiaolong Zou,
Pheng-Ann Heng
Abstract:
Attaining the equilibrium state of a catalyst-adsorbate system is key to fundamentally assessing its effective properties, such as adsorption energy. Machine learning methods with finer supervision strategies have been applied to boost and guide the relaxation process of an atomic system and better predict its properties at the equilibrium state. In this paper, we present a novel graph neural netw…
▽ More
Attaining the equilibrium state of a catalyst-adsorbate system is key to fundamentally assessing its effective properties, such as adsorption energy. Machine learning methods with finer supervision strategies have been applied to boost and guide the relaxation process of an atomic system and better predict its properties at the equilibrium state. In this paper, we present a novel graph neural network (GNN) supervision and prediction strategy DR-Label. The method enhances the supervision signal, reduces the multiplicity of solutions in edge representation, and encourages the model to provide node predictions that are graph structural variation robust. DR-Label first Deconstructs finer-grained equilibrium state information to the model by projecting the node-level supervision signal to each edge. Reversely, the model Reconstructs a more robust equilibrium state prediction by transforming edge-level predictions to node-level with a sphere-fitting algorithm. The DR-Label strategy was applied to three radically distinct models, each of which displayed consistent performance enhancements. Based on the DR-Label strategy, we further proposed DRFormer, which achieved a new state-of-the-art performance on the Open Catalyst 2020 (OC20) dataset and the Cu-based single-atom-alloyed CO adsorption (SAA) dataset. We expect that our work will highlight crucial steps for the development of a more accurate model in equilibrium state property prediction of a catalysis system.
△ Less
Submitted 5 March, 2023;
originally announced March 2023.
-
Ultrafast Plasmon-mediated Superradiance from Vertically Standing Molecules in Metallic Nanocavities
Authors:
Yuan Zhang,
Yuxin Niu,
Shunping Zhang,
Yao Zhang,
Shi-Lei Su,
Guangchao Zheng,
Luxia Wang,
Gang Chen,
Hongxing Xu,
Chongxin Shan
Abstract:
Plasmon-mediated superradiance for molecules around metallic nanospheres was proposed ten years ago. However, its demonstration has not been achieved yet due to the experimental difficulty of positioning molecules, and the theoretical limitation to the enhanced collective rate of low excited molecules. In this Letter, we propose that the ultrafast plasmon-mediated superradiant pulses can be observ…
▽ More
Plasmon-mediated superradiance for molecules around metallic nanospheres was proposed ten years ago. However, its demonstration has not been achieved yet due to the experimental difficulty of positioning molecules, and the theoretical limitation to the enhanced collective rate of low excited molecules. In this Letter, we propose that the ultrafast plasmon-mediated superradiant pulses can be observed with strongly excited methylene blue molecules standing vertically inside gold nanoparticle-on-mirror nanocavities. Our simulations indicate that in this system the molecules could interact with each other via plasmon- and free-space mediated coherent and dissipative coupling. More importantly, the coherent coupling mediated by short-ranged propagating surface plasmons cancel largely the direct dipole-dipole coupling mediated by the free-space field, and the dominated dissipative coupling mediated by relatively long-ranged gap plasmons enables the ultrafast superradiant pulses within picosecond scale. Our study opens up the possibility of studying the rich superradiant effects from the quantum emitters in a sub-wavelength volumn by engineering the plasmonic environments.
△ Less
Submitted 5 March, 2023;
originally announced March 2023.
-
The performance of SiPM-based gamma-ray detector (GRD) of GECAM-C
Authors:
Dali Zhang,
Chao Zheng,
Jiacong Liu,
Zhenghua An,
Chenwei Wang,
Xiangyang Wen,
Xinqiao Li,
Xilei Sun,
Ke Gong,
Yaqing Liu,
Xiaojing Liu,
Sheng Yang,
Wenxi Peng,
Rui Qiao,
Dongya Guo,
Peiyi Feng,
Yanqiu Zhang,
Wangchen Xue,
Wenjun Tan,
Ce Cai,
Shuo Xiao,
Qibin Yi,
Yanbing Xu,
Min Gao,
Jinzhou Wang
, et al. (20 additional authors not shown)
Abstract:
As a new member of GECAM mission, the GECAM-C (also called High Energy Burst Searcher, HEBS) is a gamma-ray all-sky monitor onboard SATech-01 satellite, which was launched on July 27th, 2022 to detect gamma-ray transients from 6 keV to 6 MeV, such as Gamma-Ray Bursts (GRBs), high energy counterpart of Gravitational Waves (GWs) and Fast Radio Bursts (FRBs), and Soft Gamma-ray Repeaters (SGRs). Toge…
▽ More
As a new member of GECAM mission, the GECAM-C (also called High Energy Burst Searcher, HEBS) is a gamma-ray all-sky monitor onboard SATech-01 satellite, which was launched on July 27th, 2022 to detect gamma-ray transients from 6 keV to 6 MeV, such as Gamma-Ray Bursts (GRBs), high energy counterpart of Gravitational Waves (GWs) and Fast Radio Bursts (FRBs), and Soft Gamma-ray Repeaters (SGRs). Together with GECAM-A and GECAM-B launched in December 2020, GECAM-C will greatly improve the monitoring coverage, localization, as well as temporal and spectral measurements of gamma-ray transients. GECAM-C employs 12 SiPM-based Gamma-Ray Detectors (GRDs) to detect gamma-ray transients . In this paper, we firstly give a brief description of the design of GECAM-C GRDs, and then focus on the on-ground tests and in-flight performance of GRDs. We also did the comparison study of the SiPM in-flight performance between GECAM-C and GECAM-B. The results show GECAM-C GRD works as expected and is ready to make scientific observations.
△ Less
Submitted 7 March, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
A Personalized Fluid-structure Interaction Modeling Paradigm for Aorta in Human Fetuses
Authors:
Ya Tang,
Guihong Chen,
Liqun Sun,
Lisa Hornberger,
Zhenglun Alan Wei,
Shuping Ge
Abstract:
Background - Congenital heart disease (CHD) is the most common birth defect and a leading cause of death and chronic illness in newborns, infants, and children. Prenatal screening and identification of CHD are critically important, but their availability and accuracy are limited by current fetal imaging techniques. To date, few models have been developed for fetal circulation. Considering the feta…
▽ More
Background - Congenital heart disease (CHD) is the most common birth defect and a leading cause of death and chronic illness in newborns, infants, and children. Prenatal screening and identification of CHD are critically important, but their availability and accuracy are limited by current fetal imaging techniques. To date, few models have been developed for fetal circulation. Considering the fetal aorta is frequently affected in CHDs, this study aims to develop and validate a novel model to assess the hemodynamics of the fetal aorta. Methods - Fetal echocardiography (FE) and Doppler were used to build a fluid-structure interaction (FSI) model that assesses the fetal aorta in 3 dimensions. An inverse approach was used to obtain the material property. An iterative method was also proposed to estimate the outflow boundaries. The FSI results have been validated against clinically measured dimensions and velocities over a cardiac cycle for aortas in 4 healthy fetuses. Results - The proposed FSI model has been implemented in 4 healthy fetal aortas representing a range of gestational age (GA = 23.5-36.0 weeks). The iterative method successfully estimated Windkessel parameters that match in vivo measured flow rates at outflow boundaries. The FSI model has been validated using in vivo velocity waveforms at the aortic isthmus. The resultant L2-norm was [12.5%, 16.4%], which is acceptable based on previous simulation studies. Also, the aortic stiffness of the fetal aorta decreased with GA, adding evidence to an existing controversy about the trend between aortic stiffness and GA. Conclusions - This study represents the first-of-its-kind endeavor of a rigorously validated personalized flow model for fetal circulation. The developed FSI model has been successfully validated for four subjects. The model was also used to obtain new evidence of fetal aortic development and growth.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Fracture network characterization with deep generative model based stochastic inversion
Authors:
Guodong Chen,
Xin Luo,
Jiu Jimmy Jiao,
Chuanyin Jiang
Abstract:
The distribution of fracture network is crucial to characterize the behaviors of flow field and solute transport, especially for enhanced geothermal systems, as fractures provide preferential flow paths. However, estimating the parameters of the fracture networks and quantifying their uncertainties based on observing data is a nontrivial task because inverse modeling of fractured model is strongly…
▽ More
The distribution of fracture network is crucial to characterize the behaviors of flow field and solute transport, especially for enhanced geothermal systems, as fractures provide preferential flow paths. However, estimating the parameters of the fracture networks and quantifying their uncertainties based on observing data is a nontrivial task because inverse modeling of fractured model is strongly nonlinear and non-Gaussian distributed. To address this issue, a novel inverse modeling framework is proposed for the estimation of the fracture networks. The hierarchical parameterization method is adopted in this work. For a small number of large fractures, each fracture is characterized by fracture length, azimuth and coordination of the fracture center. For dense small fractures, fracture density and fractal dimension are utilized to characterize the fracture networks. Moreover, we adopt variational auto-encoder and generative adversarial network (VAE-GAN) and fuse the GAN objective with prior constraint information to capture the distribution of the parameters of complex fracture networks and to satisfy the prior knowledge of fracture fields, thereby mapping the high-dimensional complex parameter distribution into low-dimensional continuous parameter field. Afterwards, relying on the Bayesian framework, ensemble smoother is adopted based on the collected data from hydraulic tomography to reduce the uncertainty of the fracture distribution. Two numerical cases with different complexity are used to test the performance of the proposed framework. The results show that the proposed algorithm can estimate effectively the distribution of the fracture fields after providing sufficient prior constraint information and hydraulic head measurements.
△ Less
Submitted 6 February, 2023; v1 submitted 30 January, 2023;
originally announced February 2023.