Showing 1–50 of 549 results for author: Chen, C

Evidence for the helicity barrier from measurements of the turbulence transition range in the solar wind

Authors: J. R. McIntyre, C. H. K. Chen, J. Squire, R. Meyrand, P. A. Simon

Abstract: The means by which the turbulent cascade of energy is dissipated in the solar wind, and in other astrophysical systems, is a major open question. It has recently been proposed that a barrier to the transfer of energy can develop at small scales, which can enable heating through ion-cyclotron resonance, under conditions applicable to regions of the solar wind. Such a scenario fundamentally diverges… ▽ More The means by which the turbulent cascade of energy is dissipated in the solar wind, and in other astrophysical systems, is a major open question. It has recently been proposed that a barrier to the transfer of energy can develop at small scales, which can enable heating through ion-cyclotron resonance, under conditions applicable to regions of the solar wind. Such a scenario fundamentally diverges from the standard picture of turbulence, where the energy cascade proceeds unimpeded until it is dissipated. Here, using data from NASA's Parker Solar Probe, we find that the shape of the magnetic energy spectrum around the ion gyroradius varies with solar wind parameters in a manner consistent with the presence of such a barrier. This allows us to identify critical values of some of the parameters necessary for the barrier to form; we show that the barrier appears fully developed for ion plasma beta of below $\simeq0.5$ and becomes increasingly prominent with imbalance for normalised cross helicity values greater than $\simeq0.4$. As these conditions are frequently met in the solar wind, particularly close to the Sun, our results suggest that the barrier is likely playing a significant role in turbulent dissipation in the solar wind and so is an important mechanism in explaining its heating and acceleration. △ Less

Submitted 15 July, 2024; originally announced July 2024.

Supernova Pointing Capabilities of DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr… ▽ More The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Comments: 25 pages, 16 figures

Report number: FERMILAB-PUB-24-0319-LBNF

> 2π Phase Modulation using Exciton-Polaritons in a Two-Dimensional Superlattice

Authors: Jason Lynch, Pawan Kumar, Chen Chen, Nicholas Trainor, Shalini Kumari, Tzu-Yu Peng, Cindy Yueli Chen, Yu-Jung Lu, Joan Redwing, Deep Jariwala

Abstract: Active metamaterials promise to enable arbitrary, temporal control over the propagation of wavefronts of light for applications such as beam steering, optical communication modulators, and holograms. This has been done in the past using patterned silicon photonics to locally control the phase of light such that the metasurface acts as a large number of wavelets. Although phase modulation only requ… ▽ More Active metamaterials promise to enable arbitrary, temporal control over the propagation of wavefronts of light for applications such as beam steering, optical communication modulators, and holograms. This has been done in the past using patterned silicon photonics to locally control the phase of light such that the metasurface acts as a large number of wavelets. Although phase modulation only requires refractive index modulation when the interaction length is on the order of the wavelength, this is not enough to significantly modulate the phase of light in flatland. Instead, phase modulation is achieved using a resonant mode such as a plasmon or high-Q cavity mode that enable light to accumulate a large amount of phase over a short distance and coupling it to an active material that modulates the light-matter interactions. Here, we report that electrostatic doping can modulate the light-matter interaction strength of a two-dimensional WS2 based multi quantum well (MQW) structure going from strongly-coupled, phase-accumulating exciton-polaritons to weakly-coupled exciton-trion-polaritons. As a result of this transition, 2.02π radians of phase modulation is observed using spectroscopic ellipsometry. This result demonstrates the potential of the MQW structure as a compact, lightweight electro-optical modulators for LiDAR and optical communications in the red region of visible spectrum. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Uni-ELF: A Multi-Level Representation Learning Framework for Electrolyte Formulation Design

Authors: Boshen Zeng, Sian Chen, Xinxin Liu, Changhong Chen, Bin Deng, Xiaoxu Wang, Zhifeng Gao, Yuzhi Zhang, Weinan E, Linfeng Zhang

Abstract: Advancements in lithium battery technology heavily rely on the design and engineering of electrolytes. However, current schemes for molecular design and recipe optimization of electrolytes lack an effective computational-experimental closed loop and often fall short in accurately predicting diverse electrolyte formulation properties. In this work, we introduce Uni-ELF, a novel multi-level represen… ▽ More Advancements in lithium battery technology heavily rely on the design and engineering of electrolytes. However, current schemes for molecular design and recipe optimization of electrolytes lack an effective computational-experimental closed loop and often fall short in accurately predicting diverse electrolyte formulation properties. In this work, we introduce Uni-ELF, a novel multi-level representation learning framework to advance electrolyte design. Our approach involves two-stage pretraining: reconstructing three-dimensional molecular structures at the molecular level using the Uni-Mol model, and predicting statistical structural properties (e.g., radial distribution functions) from molecular dynamics simulations at the mixture level. Through this comprehensive pretraining, Uni-ELF is able to capture intricate molecular and mixture-level information, which significantly enhances its predictive capability. As a result, Uni-ELF substantially outperforms state-of-the-art methods in predicting both molecular properties (e.g., melting point, boiling point, synthesizability) and formulation properties (e.g., conductivity, Coulombic efficiency). Moreover, Uni-ELF can be seamlessly integrated into an automatic experimental design workflow. We believe this innovative framework will pave the way for automated AI-based electrolyte design and engineering. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Optimal input excitations for suppressing nonlinear instabilities in multimode fibers

Authors: Kabish Wisal, Chun-Wei Chen, Zeyu Kuang, Owen D. Miller, Hui Cao, A. Douglas Stone

Abstract: Wavefront shaping has become a powerful tool for manipulating light propagation in various complex media undergoing linear scattering. Controlling nonlinear optical interactions with spatial degrees of freedom is a relatively recent but growing area of research. A wavefront-shaping-based approach can be used to suppress nonlinear stimulated Brillouin scattering (SBS) and transverse mode instabilit… ▽ More Wavefront shaping has become a powerful tool for manipulating light propagation in various complex media undergoing linear scattering. Controlling nonlinear optical interactions with spatial degrees of freedom is a relatively recent but growing area of research. A wavefront-shaping-based approach can be used to suppress nonlinear stimulated Brillouin scattering (SBS) and transverse mode instability (TMI), which are the two main limitations to power scaling in high-power narrowband fiber amplifiers. Here we formulate both SBS and TMI suppression as optimization problems with respect to coherent multimode input excitation in a given multimode fiber. We develop an efficient method for finding the globally optimal input excitation for SBS and TMI suppression using linear programming. We theoretically show that optimally exciting a standard multimode fiber leads to roughly an order of magnitude enhancement in output power limited by SBS and TMI, compared to fundamental-mode-only excitation. We find that the optimal mode content is robust to small perturbations and our approach works even in the presence of mode dependent loss and gain. Optimal mode content can be excited in real experiments using spatial light modulators, creating a novel platform for instability-free ultrahigh-power fiber lasers. △ Less

Submitted 6 July, 2024; originally announced July 2024.

Comments: 13 pages, 7 figures

Broadband Light Harvesting from Scalable Two-Dimensional Semiconductor Heterostructures

Authors: Da Lin, Jason Lynch, Sudong Wang, Zekun Hu, Rajeev Kumar Rai, Huairuo Zhang, Chen Chen, Shalini Kumari, Eric Stach, Albert V. Davydov, Joan M. Redwing, Deep Jariwala

Abstract: Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experime… ▽ More Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experimental realization of an unpatterned/planar semiconductor thin-film absorber based on monolayer transition metal dichalcogenides (TMDCs). We experimentally demonstrate an average total absorption in the visible range (450 nm - 700 nm) of > 70% using > 4 nm of semiconductor absorbing materials scalable over large areas with vapor phase growth techniques. Our analysis suggests that a power conversion efficiency (PCE) of 15.54% and a specific power > 300 W g^-1 may be achieved in a photovoltaic cell based on this metamaterial absorber. △ Less

Submitted 6 July, 2024; originally announced July 2024.

An analytic, moment-based method to estimate orthopositronium lifetimes in positron annihilation lifetime spectroscopy measurements

Authors: Lucas Berens, Isaac Hsu, Chin-Tu Chen, Howard Halpern, Chien-Min Kao

Abstract: The presence of tumor hypoxia is known to correlate with poor patient prognosis. Measurement of tissue oxygen concentration can be challenging, but recent advancements using positron annihilation lifetime spectroscopy (PALS) in three-dimensional positron emission tomography (PET) scans have shown promise for hypoxia detection. In this work, a novel method for estimating the orthopositronium lifeti… ▽ More The presence of tumor hypoxia is known to correlate with poor patient prognosis. Measurement of tissue oxygen concentration can be challenging, but recent advancements using positron annihilation lifetime spectroscopy (PALS) in three-dimensional positron emission tomography (PET) scans have shown promise for hypoxia detection. In this work, a novel method for estimating the orthopositronium lifetime in PALS is presented. This method is analytical and uses moments of the time-difference histogram from photon arrival times. For sufficient statistical power, the method produces monotonic, stable estimates. For cases with a lower number of photon counts, the method was characterized and solutions are presented to correct for bias and estimation variability. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Data on the Move: Traffic-Oriented Data Trading Platform Powered by AI Agent with Common Sense

Authors: Yi Yu, Shengyue Yao, Tianchen Zhou, Yexuan Fu, Jingru Yu, Ding Wang, Xuhong Wang, Cen Chen, Yilun Lin

Abstract: In the digital era, data has become a pivotal asset, advancing technologies such as autonomous driving. Despite this, data trading faces challenges like the absence of robust pricing methods and the lack of trustworthy trading mechanisms. To address these challenges, we introduce a traffic-oriented data trading platform named Data on The Move (DTM), integrating traffic simulation, data trading, an… ▽ More In the digital era, data has become a pivotal asset, advancing technologies such as autonomous driving. Despite this, data trading faces challenges like the absence of robust pricing methods and the lack of trustworthy trading mechanisms. To address these challenges, we introduce a traffic-oriented data trading platform named Data on The Move (DTM), integrating traffic simulation, data trading, and Artificial Intelligent (AI) agents. The DTM platform supports evident-based data value evaluation and AI-based trading mechanisms. Leveraging the common sense capabilities of Large Language Models (LLMs) to assess traffic state and data value, DTM can determine reasonable traffic data pricing through multi-round interaction and simulations. Moreover, DTM provides a pricing method validation by simulating traffic systems, multi-agent interactions, and the heterogeneity and irrational behaviors of individuals in the trading market. Within the DTM platform, entities such as connected vehicles and traffic light controllers could engage in information collecting, data pricing, trading, and decision-making. Simulation results demonstrate that our proposed AI agent-based pricing approach enhances data trading by offering rational prices, as evidenced by the observed improvement in traffic efficiency. This underscores the effectiveness and practical value of DTM, offering new perspectives for the evolution of data markets and smart cities. To the best of our knowledge, this is the first study employing LLMs in data pricing and a pioneering data trading practice in the field of intelligent vehicles and smart cities. △ Less

Submitted 1 July, 2024; originally announced July 2024.

The Belle II Detector Upgrades Framework Conceptual Design Report

Authors: H. Aihara, A. Aloisio, D. P. Auguste, M. Aversano, M. Babeluk, S. Bahinipati, Sw. Banerjee, M. Barbero, J. Baudot, A. Beaubien, F. Becherer, T. Bergauer, F. U. Bernlochner., V. Bertacchi, G. Bertolone, C. Bespin, M. Bessner, S. Bettarini, A. J. Bevan, B. Bhuyan, M. Bona, J. F. Bonis, J. Borah, F. Bosi, R. Boudagga , et al. (186 additional authors not shown)

Abstract: We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive wit… ▽ More We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive with the LHC and other experiments. △ Less

Submitted 4 July, 2024; v1 submitted 26 June, 2024; originally announced June 2024.

Comments: Editor: F. Forti 170 pages

Report number: KEK-REPORT-2024-1, BELLE2-REPORT-2024-042

Clock-line-mediated Sisyphus Cooling

Authors: Chun-Chia Chen, Jacob L. Siegel, Benjamin D. Hunt, Tanner Grogan, Youssef S. Hassan, Kyle Beloy, Kurt Gibble, Roger C. Brown, Andrew D. Ludlow

Abstract: We demonstrate sub-recoil Sisyphus cooling using the long-lived $^{3}\mathrm{P}_{0}$ clock state in alkaline-earth-like ytterbium. A 1388 nm optical standing wave nearly resonant with the $^{3}\textrm{P}_{0}$$\,\rightarrow$$\,^{3}\textrm{D}_{1}$ transition creates a spatially periodic light shift of the $^{3}\textrm{P}_{0}$ clock state. Following excitation on the ultranarrow clock transition, we… ▽ More We demonstrate sub-recoil Sisyphus cooling using the long-lived $^{3}\mathrm{P}_{0}$ clock state in alkaline-earth-like ytterbium. A 1388 nm optical standing wave nearly resonant with the $^{3}\textrm{P}_{0}$$\,\rightarrow$$\,^{3}\textrm{D}_{1}$ transition creates a spatially periodic light shift of the $^{3}\textrm{P}_{0}$ clock state. Following excitation on the ultranarrow clock transition, we observe Sisyphus cooling in this potential, as the light shift is correlated with excitation to $^{3}\textrm{D}_{1}$ and subsequent spontaneous decay to the $^{1}\textrm{S}_{0}$ ground state. We observe that cooling enhances the loading efficiency of atoms into a 759 nm magic-wavelength one-dimensional (1D) optical lattice, as compared to standard Doppler cooling on the $^{1}\textrm{S}_{0}$$\,\rightarrow\,$$^{3}\textrm{P}_{1}$ transition. Sisyphus cooling yields temperatures below 200 nK in the weakly confined, transverse dimensions of the 1D optical lattice. These lower temperatures improve optical lattice clocks by facilitating the use of shallow lattices with reduced light shifts, while retaining large atom numbers to reduce the quantum projection noise. This Sisyphus cooling can be pulsed or continuous and is applicable to a range of quantum metrology applications. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 8 pages, 6 figures

Formation of a Magnetic Cloud from the Merging of Two Successive Coronal Mass Ejections

Authors: Chong Chen, Ying D. Liu, Bei Zhu, Huidong Hu, Rui Wang

Abstract: On 2022 March 28 two successive coronal mass ejections (CMEs) were observed by multiple spacecraft and resulted in a magnetic cloud (MC) at 1 AU. We investigate the propagation and interaction properties of the two CMEs correlated with the MC using coordinated multi-point remote sensing and in situ observations from Solar Orbiter, STEREO A, SOHO, and Wind. The first CME was triggered by a filament… ▽ More On 2022 March 28 two successive coronal mass ejections (CMEs) were observed by multiple spacecraft and resulted in a magnetic cloud (MC) at 1 AU. We investigate the propagation and interaction properties of the two CMEs correlated with the MC using coordinated multi-point remote sensing and in situ observations from Solar Orbiter, STEREO A, SOHO, and Wind. The first CME was triggered by a filament eruption with a high inclination angle. Roughly 9 hr later, the second CME originating from the same active region erupted with a smaller tilt angle and faster speed compared to the first one. The second CME overtook the preceding CME and formed a merged front at approximately 75 \rsun{}, which developed into a complex ejecta at 1 AU. The descending speed and low proton temperature inside the complex ejecta suggest that the two CMEs have fully merged before reaching 1 AU, leading them to begin expanding rather than compressing against each other. The complex ejecta appears to have the magnetic field and plasma signatures of an MC, although there is a discontinuity in the magnetic field implying previous interactions. The cross section of the complex ejecta, reconstructed from in situ data using a Grad-Shafranov technique, exhibits a right--handed flux rope structure. These results highlight that an MC--like complex ejecta lacking interaction features could arise from the complete merging of two CMEs. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Targeted marine cloud brightening can dampen El Niño

Authors: Jessica S. Wan, John T. Fasullo, Nan Rosenbloom, Chih-Chieh Jack Chen, Katharine Ricke

Abstract: Many record-breaking climate extremes arise from both greenhouse gas-induced warming and natural climate variability. Marine cloud brightening, a solar geoengineering strategy originally proposed to reduce long-term warming, could potentially mitigate extreme events by instead targeting seasonal phenomena, such as El Niño-Southern Oscillation (ENSO). By exploiting the 2019-2020 Australian wildfire… ▽ More Many record-breaking climate extremes arise from both greenhouse gas-induced warming and natural climate variability. Marine cloud brightening, a solar geoengineering strategy originally proposed to reduce long-term warming, could potentially mitigate extreme events by instead targeting seasonal phenomena, such as El Niño-Southern Oscillation (ENSO). By exploiting the 2019-2020 Australian wildfire experiment-of-opportunity, we show that simulated marine cloud brightening in the southeast Pacific reproduces observed cloud changes and induces La Niña-like responses. We then explore how cloud brightening timing and duration modifies the 1997-1998 and 2015-2016 El Niño events. We find the earliest and longest interventions effectively restore neutral ENSO conditions and dampen El Niño's impacts. Solar geoengineering that targets climate variability could complement tools such as ENSO forecasting and provide a pathway for climate risk mitigation. △ Less

Submitted 11 June, 2024; originally announced June 2024.

High-Performance Ferroelectric Field-Effect Transistors with Ultra-High Current and Carrier Densities

Authors: Seunguk Song, Kwan-Ho Kim, Rachael Keneipp, Nicholas Trainor, Chen Chen, Jeffrey Zheng, Joan M. Redwing, Marija Drndić, Roy H. Olsson III, Deep Jariwala

Abstract: Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistan… ▽ More Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistance between the metal electrodes and the channel. Here, we report a significant enhancement in performance of contact-engineered FeFETs with a 2D MoS2 channel and a ferroelectric Al0.68Sc0.32N (AlScN) gate dielectric. Replacing Ti with In contact electrodes results in a fivefold increase in on-state current (~120 uA/um at 1 V) and on-to-off ratio (~2*10^7) in the FeFETs. In addition, the high carrier concentration in the MoS2 channel during the on-state (> 10^14 cm^-2) facilitates the observation of a metal-to-insulator phase transition in monolayer MoS2 permitting observation of high field effect mobility (> 100 cm^2V^-1s^-1) at cryogenic temperatures. Our work and devices broaden the potential of FeFETs and provides a unique platform to implement high-carrier-density transport in a 2D channel. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 42 pages, 5 main figures

Revealing the Microscopic Mechanism of Elementary Vortex Pinning in Superconductors

Authors: C. Chen, Y. Liu, Y. Chen, Y. N. Hu, T. Z. Zhang, D. Li, X. Wang, C. X. Wang, Z. Y. W. Lu, Y. H. Zhang, Q. L. Zhang, X. L. Dong, R. Wang, D. L. Feng, T. Zhang

Abstract: Vortex pinning is a crucial factor that determines the critical current of practical superconductors. However, the understanding of its underlying mechanism has long been phenomenological without a clear microscopic description. Here using high-resolution scanning tunneling microscopy, we studied single vortex pinning induced by point defect in layered FeSe-based superconductors. We found the defe… ▽ More Vortex pinning is a crucial factor that determines the critical current of practical superconductors. However, the understanding of its underlying mechanism has long been phenomenological without a clear microscopic description. Here using high-resolution scanning tunneling microscopy, we studied single vortex pinning induced by point defect in layered FeSe-based superconductors. We found the defect-vortex interaction drives low-energy vortex bound states away from EF, resulting a mini gap which effectively lowered the energy of vortex and caused the pinning. By measuring the local density-of-states, we directly obtained the elementary pinning energy and estimated the pinning force through the spatial gradient of pinning energy. The results align with the bulk critical current measurement. We further show that a general microscopic quantum model with considering defect-vortex interaction can well capture our observation. It indicates the local pairing near pinned vortex core is actually enhanced, which is beyond the traditional understanding that non-superconducting regions pin vortices. Our study thus revealed a general microscopic mechanism of vortex pinning in superconductors. △ Less

Submitted 26 March, 2024; originally announced March 2024.

Comments: 28 pages, 12 figures, Supplementary Materials included. Comments are welcome

Wastewater-based Epidemiology for COVID-19 Surveillance: A Survey

Authors: Chen Chen, Gursharn Kaur, Aniruddha Adiga, Baltazar Espinoza, Srinivasan Venkatramanan, Andrew Warren, Bryan Lewis, Justin Crow, Rekha Singh, Alexandra Lorentz, Denise Toney, Madhav Marathe

Abstract: The pandemic of COVID-19 has imposed tremendous pressure on public health systems and social economic ecosystems over the past years. To alleviate its social impact, it is important to proactively track the prevalence of COVID-19 within communities. The traditional way to estimate the disease prevalence is to estimate from reported clinical test data or surveys. However, the coverage of clinical t… ▽ More The pandemic of COVID-19 has imposed tremendous pressure on public health systems and social economic ecosystems over the past years. To alleviate its social impact, it is important to proactively track the prevalence of COVID-19 within communities. The traditional way to estimate the disease prevalence is to estimate from reported clinical test data or surveys. However, the coverage of clinical tests is often limited and the tests can be labor-intensive, requires reliable and timely results, and consistent diagnostic and reporting criteria. Recent studies revealed that patients who are diagnosed with COVID-19 often undergo fecal shedding of SARS-CoV-2 virus into wastewater, which makes wastewater-based epidemiology (WBE) for COVID-19 surveillance a promising approach to complement traditional clinical testing. In this paper, we survey the existing literature regarding WBE for COVID-19 surveillance and summarize the current advances in the area. Specifically, we have covered the key aspects of wastewater sampling, sample testing, and presented a comprehensive and organized summary of wastewater data analytical methods. Finally, we provide the open challenges on current wastewater-based COVID-19 surveillance studies, aiming to encourage new ideas to advance the development of effective wastewater-based surveillance systems for general infectious diseases. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Multi-photon super-linear image scanning microscopy using upconversion nanoparticles

Authors: Yao Wang, Baolei Liu, Lei Ding, Chaohao Chen, Xuchen Shan, Dajing Wang, Menghan Tian, Jiaqi Song, Ze Zheng, Xiaoxue Xu, Xiaolan Zhong, Fan Wang

Abstract: Super-resolution fluorescence microscopy is of great interest in life science studies for visualizing subcellular structures at the nanometer scale. Among various kinds of super-resolution approaches, image scanning microscopy (ISM) offers a doubled resolution enhancement in a simple and straightforward manner, based on the commonly used confocal microscopes. ISM is also suitable to be integrated… ▽ More Super-resolution fluorescence microscopy is of great interest in life science studies for visualizing subcellular structures at the nanometer scale. Among various kinds of super-resolution approaches, image scanning microscopy (ISM) offers a doubled resolution enhancement in a simple and straightforward manner, based on the commonly used confocal microscopes. ISM is also suitable to be integrated with multi-photon microscopy techniques, such as two-photon excitation and second-harmonic generation imaging, for deep tissue imaging, but it remains the twofold limited resolution enhancement and requires expensive femtosecond lasers. Here, we present and experimentally demonstrate the super-linear ISM (SL-ISM) to push the resolution enhancement beyond the factor of two, with a single low-power, continuous-wave, and near-infrared laser, by harnessing the emission nonlinearity within the multiphoton excitation process of lanthanide-doped upconversion nanoparticles (UCNPs). Based on a modified confocal microscope, we achieve a resolution of about 120 nm, 1/8th of the excitation wavelength. Furthermore, we demonstrate a parallel detection strategy of SL-ISM with the multifocal structured excitation pattern, to speed up the acquisition frame rate. This method suggests a new perspective for super-resolution imaging or sensing, multi-photon imaging, and deep-tissue imaging with simple, low-cost, and straightforward implementations. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Comments: 9 pages, 4 figures

Deep learning generative model for crystal structure prediction

Authors: Xiaoshan Luo, Zhenyu Wang, Pengyue Gao, Jian Lv, Yanchao Wang, Changfeng Chen, Yanming Ma

Abstract: Recent advances in deep learning generative models (GMs) have created unprecedented high capabilities in accessing and assessing complex high-dimensional data, allowing superior efficiency in navigating vast material configuration space in search of viable structures. Coupling such capabilities with physically significant data to construct trained models for materials discovery is crucial to movin… ▽ More Recent advances in deep learning generative models (GMs) have created unprecedented high capabilities in accessing and assessing complex high-dimensional data, allowing superior efficiency in navigating vast material configuration space in search of viable structures. Coupling such capabilities with physically significant data to construct trained models for materials discovery is crucial to moving this emerging field forward. Here, we present a universal GM for crystal structure prediction (CSP) via a conditional crystal diffusion variational autoencoder (Cond-CDVAE) approach, which is tailored to allow user-defined material and physical parameters such as composition and pressure. This model is trained on an expansive dataset containing over 670,000 local minimum structures, including a rich spectrum of high-pressure structures, along with ambient-pressure structures in Materials Project database. We demonstrate that the Cond-CDVAE model can generate physically plausible structures with high fidelity under diverse pressure conditions without necessitating local optimization, accurately predicting 59.3% of the 3,547 unseen ambient-pressure experimental structures within 800 structure samplings, with the accuracy rate climbing to 83.2% for structures comprising fewer than 20 atoms per unit cell. These results meet or exceed those achieved via conventional CSP methods based on global optimization. The present findings showcase substantial potential of GMs in the realm of CSP. △ Less

Submitted 16 March, 2024; originally announced March 2024.

Bound-extended mode transition in type-II synthetic photonic Weyl heterostructures

Authors: Wange Song, Zhiyuan Lin, Jitao Ji, Jiacheng Sun, Chen Chen, Shengjie Wu, Chunyu Huang, Luqi Yuan, Shining Zhu, Tao Li

Abstract: Photonic structures with Weyl points (WPs), including type-I and type-II, promise nontrivial surface modes and intriguing light manipulations for their three-dimensional topological bands. While previous studies mainly focus on exploring WPs in a uniform Weyl structure, here we establish Weyl heterostructures (i.e., a nonuniform Weyl lattice) with different rotational orientations in the synthetic… ▽ More Photonic structures with Weyl points (WPs), including type-I and type-II, promise nontrivial surface modes and intriguing light manipulations for their three-dimensional topological bands. While previous studies mainly focus on exploring WPs in a uniform Weyl structure, here we establish Weyl heterostructures (i.e., a nonuniform Weyl lattice) with different rotational orientations in the synthetic dimension by nanostructured photonic waveguides. In this work, we unveil a transition between bound and extended modes on the interface of type-II Weyl heterostructures by tuning their rotational phases, despite the reversed topological order across the interface. This mode transition is also manifested from the total transmission to total reflection at the interface. All of these unconventional effects are attributed to the tilted dispersion of type-II Weyl band structure that can lead to mismatched bands and gaps across the interface. As a comparison, the type-I Weyl heterostructures lack the phase transition due to the untilted band structure. This work establishes a flexible scheme of artificial Weyl heterostructures that opens a new avenue towards high-dimensional topological effects and significantly enhances our capabilities in on-chip light manipulations. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Comments: to be published in Phys. Rev. Lett

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

A scalable cavity-based spin-photon interface in a photonic integrated circuit

Authors: Kevin C. Chen, Ian Christen, Hamza Raniwala, Marco Colangelo, Lorenzo De Santis, Katia Shtyrkova, David Starling, Ryan Murphy, Linsen Li, Karl Berggren, P. Benjamin Dixon, Matthew Trusheim, Dirk Englund

Abstract: A central challenge in quantum networking is transferring quantum states between different physical modalities, such as between flying photonic qubits and stationary quantum memories. One implementation entails using spin-photon interfaces that combine solid-state spin qubits, such as color centers in diamond, with photonic nanostructures. However, while high-fidelity spin-photon interactions have… ▽ More A central challenge in quantum networking is transferring quantum states between different physical modalities, such as between flying photonic qubits and stationary quantum memories. One implementation entails using spin-photon interfaces that combine solid-state spin qubits, such as color centers in diamond, with photonic nanostructures. However, while high-fidelity spin-photon interactions have been demonstrated on isolated devices, building practical quantum repeaters requires scaling to large numbers of interfaces yet to be realized. Here, we demonstrate integration of nanophotonic cavities containing tin-vacancy (SnV) centers in a photonic integrated circuit (PIC). Out of a six-channel quantum micro-chiplet (QMC), we find four coupled SnV-cavity devices with an average Purcell factor of ~7. Based on system analyses and numerical simulations, we find with near-term improvements this multiplexed architecture can enable high-fidelity quantum state transfer, paving the way towards building large-scale quantum repeaters. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: to be published in Optica Quantum

Prediction of Fishbone Linear Instability in Tokamaks with Machine Learning Methods

Authors: Z. Y. Liu, H. R. Qiu, G. Y. Fu, Y. Xiao, Y. C. Chen, Z. J. Wang, Y. X. Wei

Abstract: A machine learning based surrogate model for fishbone linear instability in tokamaks is constructed. Hybrid simulations with the kinetic-magnetohydrodynamic (MHD) code M3D-K is used to generate the database of fishbone linear instability, through scanning the four key parameters which are thought to determine the fishbone physics. The four key parameters include (1) central total beta of both ther… ▽ More A machine learning based surrogate model for fishbone linear instability in tokamaks is constructed. Hybrid simulations with the kinetic-magnetohydrodynamic (MHD) code M3D-K is used to generate the database of fishbone linear instability, through scanning the four key parameters which are thought to determine the fishbone physics. The four key parameters include (1) central total beta of both thermal plasma and fast ions, (2) the fast ion pressure fraction, (3) central value of safety factor $q$ and (4) the radius of $q=1$ surface. Four machine learning methods including linear regression, support vector machines (SVM) with linear kernel, SVM with nonlinear kernel and multi-layer perceptron are used to predict the fishbone instability, growth rate and real frequency, mode structure respectively. Among the four methods, SVM with nonlinear kernel performs very well to predict the linear instability with accuracy $\approx$95%, growth rate and real frequency with $R^2\approx$98%, mode structure with $R^2\approx$98%. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Comments: 28 pages,19 figures

Enhancing a Many-body Dipolar Rydberg Tweezer Array with Arbitrary Local Controls

Authors: Guillaume Bornet, Gabriel Emperauger, Cheng Chen, Francisco Machado, Sabrina Chern, Lucas Leclerc, Bastien Gély, Daniel Barredo, Thierry Lahaye, Norman Y. Yao, Antoine Browaeys

Abstract: We implement and characterize a protocol that enables arbitrary local controls in a dipolar atom array, where the degree of freedom is encoded in a pair of Rydberg states. Our approach relies on a combination of local addressing beams and global microwave fields. Using this method, we directly prepare two different types of three-atom entangled states, including a W-state and a state exhibiting fi… ▽ More We implement and characterize a protocol that enables arbitrary local controls in a dipolar atom array, where the degree of freedom is encoded in a pair of Rydberg states. Our approach relies on a combination of local addressing beams and global microwave fields. Using this method, we directly prepare two different types of three-atom entangled states, including a W-state and a state exhibiting finite chirality. We verify the nature of the underlying entanglement by performing quantum state tomography. Finally, leveraging our ability to measure multi-basis, multi-body observables, we explore the adiabatic preparation of low-energy states in a frustrated geometry consisting of a pair of triangular plaquettes. By using local addressing to tune the symmetry of the initial state, we demonstrate the ability to prepare correlated states distinguished only by correlations of their chirality (a fundamentally six-body observable). Our protocol is generic, allowing for rotations on arbitrary subgroups of atoms within the array at arbitrary times during the experiment; this extends the scope of capabilities for quantum simulations of the dipolar XY model. △ Less

Submitted 16 February, 2024; originally announced February 2024.

Comments: 12 pages, 4 figures (main text) + 6 figures (Supplemental Material)

Journal ref: Phys. Rev. Lett. 132, 263601 (2024)

Exploiting spacetime symmetry in dissipative nonlinear multimode amplifiers for output control

Authors: Chun-Wei Chen, Kabish Wisal, Mathias Fink, A. Douglas Stone, Hui Cao

Abstract: Time-reversal symmetry enables shaping input waves to control output waves in many linear and nonlinear systems; however energy dissipation violates such symmetry. We consider a saturated multimode fiber amplifier in which light generates heat flow and suffers nonlinear thermo-optical scattering, breaking time-reversal symmetry. We identify a spacetime symmetry which maps the target output back to… ▽ More Time-reversal symmetry enables shaping input waves to control output waves in many linear and nonlinear systems; however energy dissipation violates such symmetry. We consider a saturated multimode fiber amplifier in which light generates heat flow and suffers nonlinear thermo-optical scattering, breaking time-reversal symmetry. We identify a spacetime symmetry which maps the target output back to an input field. This mapping employs phase conjugation, gain and absorption substitution but not time reversal, and holds in steady-state and for slowly varying inputs. Our results open the possibility of output control of a saturated multimode fiber amplifier. △ Less

Submitted 15 February, 2024; originally announced February 2024.

Topological Edge States in Reconfigurable Multi-stable Mechanical Metamaterials

Authors: Zhen Wang, Feiyang Sun, Xiaodong Xu, Xin Li, Chuanqing Chen, Minghui Lu

Abstract: Multi-stable mechanical structures find cutting-edge applications across various domains due to their reconfigurability, which offers innovative possibilities for engineering and technology advancements. This study explores the emergence of topological states in a one-dimensional chain-like multi-stable mechanical metamaterial composed of bistable units through a combination of mechanical and opti… ▽ More Multi-stable mechanical structures find cutting-edge applications across various domains due to their reconfigurability, which offers innovative possibilities for engineering and technology advancements. This study explores the emergence of topological states in a one-dimensional chain-like multi-stable mechanical metamaterial composed of bistable units through a combination of mechanical and optical experiments. Drawing inspiration from the SSH (Su-Schrieffer-Heeger) model in condensed matter physics, we leverage the unique mechanical properties of the reconfigurable ligament-oscillator metamaterial to engineer a system with coexisting topological phases. Based on the one-dimensional periodic bistable chain, there is an exponential decay diffusion of elastic energy from both end boundaries towards the interior of the body. Experimental characterizations demonstrate the existence of stable topological phases within the reconfigurable multi-stable mechanical metamaterial. The findings underscore the potential of reconfigurable mechanical metamaterials as versatile platforms for flexibly exploring and manipulating topological phenomena, with applications ranging from impact resistance to energy harvesting and information processing. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Excited-Band Coherent Delocalization for Improved Optical Lattice Clock Performance

Authors: Jacob Siegel, William McGrew, Youssef Hassan, Chun-Chia Chen, Kyle Beloy, Tanner Grogan, Xiaogang Zhang, Andrew Ludlow

Abstract: We implement coherent delocalization as a tool for improving the two primary metrics of atomic clock performance: systematic uncertainty and instability. By decreasing atomic density with coherent delocalization, we suppress cold-collision shifts and two-body losses. Atom loss attributed to Landau-Zener tunneling in the ground lattice band would compromise coherent delocalization at low trap depth… ▽ More We implement coherent delocalization as a tool for improving the two primary metrics of atomic clock performance: systematic uncertainty and instability. By decreasing atomic density with coherent delocalization, we suppress cold-collision shifts and two-body losses. Atom loss attributed to Landau-Zener tunneling in the ground lattice band would compromise coherent delocalization at low trap depths for our $^{171}$Yb atoms; hence, we implement for the first time delocalization in excited lattice bands. Doing so increases the spatial distribution of atoms trapped in the vertically-oriented optical lattice by $\sim7$ times. At the same time we observe a reduction of the cold-collision shift by 6.5(8) times, while also making inelastic two-body loss negligible. With these advantages, we measure the trap-light-induced quenching rate and natural lifetime of the ${}^3$P${}_0$ excited-state as $5.7(7)\times10^{-4}$ $E_r^{-1}s^{-1}$ and 19(2) s, respectively. △ Less

Submitted 12 February, 2024; v1 submitted 7 February, 2024; originally announced February 2024.

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

Iterative assembly of $^{171}$Yb atom arrays with cavity-enhanced optical lattices

Authors: M. A. Norcia, H. Kim, W. B. Cairncross, M. Stone, A. Ryou, M. Jaffe, M. O. Brown, K. Barnes, P. Battaglino, T. C. Bohdanowicz, A. Brown, K. Cassella, C. -A. Chen, R. Coxe, D. Crow, J. Epstein, C. Griger, E. Halperin, F. Hummel, A. M. W. Jones, J. M. Kindem, J. King, K. Kotru, J. Lauigan, M. Li , et al. (25 additional authors not shown)

Abstract: Assembling and maintaining large arrays of individually addressable atoms is a key requirement for continued scaling of neutral-atom-based quantum computers and simulators. In this work, we demonstrate a new paradigm for assembly of atomic arrays, based on a synergistic combination of optical tweezers and cavity-enhanced optical lattices, and the incremental filling of a target array from a repeti… ▽ More Assembling and maintaining large arrays of individually addressable atoms is a key requirement for continued scaling of neutral-atom-based quantum computers and simulators. In this work, we demonstrate a new paradigm for assembly of atomic arrays, based on a synergistic combination of optical tweezers and cavity-enhanced optical lattices, and the incremental filling of a target array from a repetitively filled reservoir. In this protocol, the tweezers provide microscopic rearrangement of atoms, while the cavity-enhanced lattices enable the creation of large numbers of optical traps with sufficient depth for rapid low-loss imaging of atoms. We apply this protocol to demonstrate near-deterministic filling (99% per-site occupancy) of 1225-site arrays of optical traps. Because the reservoir is repeatedly filled with fresh atoms, the array can be maintained in a filled state indefinitely. We anticipate that this protocol will be compatible with mid-circuit reloading of atoms into a quantum processor, which will be a key capability for running large-scale error-corrected quantum computations whose durations exceed the lifetime of a single atom in the system. △ Less

Submitted 18 June, 2024; v1 submitted 29 January, 2024; originally announced January 2024.

Comments: 8 pages, 6 figures

The Alpha-Proton Differential Flow in the Alfvénic Young Solar Wind: From Sub-Alfvénic to Super-Alfvénic

Authors: Hao Ran, Ying D. Liu, Chong Chen, Parisa Mostafavi

Abstract: Data obtained from Parker Solar Probe (PSP) since 2021 April have shown the first in situ observation of the solar corona, where the solar wind is formed and accelerated. Here we investigate the alpha-proton differential flow and its characteristics across the critical Alfvén surface (CAS) using data from PSP during encounters 8-10 and 12-13. We first show the positive correlation between the alph… ▽ More Data obtained from Parker Solar Probe (PSP) since 2021 April have shown the first in situ observation of the solar corona, where the solar wind is formed and accelerated. Here we investigate the alpha-proton differential flow and its characteristics across the critical Alfvén surface (CAS) using data from PSP during encounters 8-10 and 12-13. We first show the positive correlation between the alpha-proton differential velocity and the bulk solar wind speed at PSP encounter distances. Then we explore how the characteristics of the differential flow vary across the CAS and how they are affected by Alfvénic fluctuations including switchbacks. We find that the differential velocity below the CAS is generally smaller than that above the CAS, and the local Alfvén speed well limits the differential speed both above and below the CAS. The deviations from the alignment between the differential velocity and the local magnetic field vector are accompanied by large-amplitude Alfvénic fluctuations and decreases in the differential speed. Moreover, we observe that $V_{αp}$ increases from $M_A < 1$ to $M_A \simeq 2$ and then starts to decrease, which suggests that alphas may remain preferentially accelerated well above the CAS. Our results also reveal that in the sub-Alfvénic solar wind both protons and alphas show a strong correlation between their velocity fluctuations and magnetic field fluctuations, with a weaker correlation for alphas. In contrast, in the super-Alfvénic regime the correlation remains high for protons, but is reduced for alphas. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Comments: Accepted for publication in the Astrophysical Journal

A Comprehensive Review of Pre-Darcy Flows in Low-Permeability Porous Media

Authors: Yuntian Teng, Zihao Li, Cheng Chen

Abstract: This paper reviews theories, experimental data, and modeling methods for pre-Darcy flow in low-permeability porous media, where Darcy velocity shows nonlinear dependence on pressure gradients at sufficiently low pressures, a deviation from Darcy's law. It begins by explaining the fundamental mechanisms of pre-Darcy flow, focusing on its unique characteristics like non-linear pressure gradients and… ▽ More This paper reviews theories, experimental data, and modeling methods for pre-Darcy flow in low-permeability porous media, where Darcy velocity shows nonlinear dependence on pressure gradients at sufficiently low pressures, a deviation from Darcy's law. It begins by explaining the fundamental mechanisms of pre-Darcy flow, focusing on its unique characteristics like non-linear pressure gradients and fluid-rock interactions. Next, the paper compiles experimental studies on low-permeability geomaterials such as tight sandstones, shales, and clays, detailing methodologies employed, including core sample preparation, permeability measurement techniques, and threshold pressure gradient assessments. The experiments' findings, showing how pore geometry, fluid type, and pressure conditions affect pre-Darcy flow onset, are discussed. The review then covers empirical and theoretical models, plus simulation methods developed for interpreting data on pre-Darcy flow. It concludes by highlighting challenges in conducting and interpreting these experiments, suggesting directions for future research. This comprehensive analysis aims to assist those studying fluid dynamics in low-permeability geomaterials and has implications for applications like shale oil and gas recovery, contaminant transport in low-permeability aquifers, and geological nuclear waste disposal. △ Less

Submitted 9 January, 2024; originally announced January 2024.

Accelerating computational materials discovery with artificial intelligence and cloud high-performance computing: from large-scale screening to experimental validation

Authors: Chi Chen, Dan Thien Nguyen, Shannon J. Lee, Nathan A. Baker, Ajay S. Karakoti, Linda Lauw, Craig Owen, Karl T. Mueller, Brian A. Bilodeau, Vijayakumar Murugesan, Matthias Troyer

Abstract: High-throughput computational materials discovery has promised significant acceleration of the design and discovery of new materials for many years. Despite a surge in interest and activity, the constraints imposed by large-scale computational resources present a significant bottleneck. Furthermore, examples of large-scale computational discovery carried through experimental validation remain scar… ▽ More High-throughput computational materials discovery has promised significant acceleration of the design and discovery of new materials for many years. Despite a surge in interest and activity, the constraints imposed by large-scale computational resources present a significant bottleneck. Furthermore, examples of large-scale computational discovery carried through experimental validation remain scarce, especially for materials with product applicability. Here we demonstrate how this vision became reality by first combining state-of-the-art artificial intelligence (AI) models and traditional physics-based models on cloud high-performance computing (HPC) resources to quickly navigate through more than 32 million candidates and predict around half a million potentially stable materials. By focusing on solid-state electrolytes for battery applications, our discovery pipeline further identified 18 promising candidates with new compositions and rediscovered a decade's worth of collective knowledge in the field as a byproduct. By employing around one thousand virtual machines (VMs) in the cloud, this process took less than 80 hours. We then synthesized and experimentally characterized the structures and conductivities of our top candidates, the Na$_x$Li$_{3-x}$YCl$_6$ ($0 < x < 3$) series, demonstrating the potential of these compounds to serve as solid electrolytes. Additional candidate materials that are currently under experimental investigation could offer more examples of the computational discovery of new phases of Li- and Na-conducting solid electrolytes. We believe that this unprecedented approach of synergistically integrating AI models and cloud HPC not only accelerates materials discovery but also showcases the potency of AI-guided experimentation in unlocking transformative scientific breakthroughs with real-world applications. △ Less

Submitted 8 January, 2024; originally announced January 2024.

The relation between magnetic switchbacks and turbulence in the inner heliosphere

Authors: A. Larosa, C. H. K Chen, J. R. McIntyre, V. K. Jagarlamudi

Abstract: We investigate the relation between turbulence and magnetic field switchbacks in the inner heliosphere below 0.5 AU in a distance and scale dependent manner. The analysis is performed by studying the evolution of the magnetic field vector increments and the corresponding rotation distributions, which contain the switchbacks. We find that the rotation distributions evolve in a scale dependent fashi… ▽ More We investigate the relation between turbulence and magnetic field switchbacks in the inner heliosphere below 0.5 AU in a distance and scale dependent manner. The analysis is performed by studying the evolution of the magnetic field vector increments and the corresponding rotation distributions, which contain the switchbacks. We find that the rotation distributions evolve in a scale dependent fashion, having the same shape at small scales independent of the radial distance, contrary to at larger scales where the shape evolves with distance. The increments are shown to evolve towards a log-normal shape with increasing radial distance, even though the log-normal fit works quite well at all distances especially at small scales. The rotation distributions are shown to evolve towards the Zhdankin et al. (2012) rotation model moving away from the Sun. The magnetic switchbacks do not appear at any distance as a clear separate population. Our results suggest a scenario in which the evolution of the rotation distributions, including switchbacks, is primarily the result of the expansion driven growth of the fluctuations, which are reshaped into a log-normal distribution by the solar wind turbulence. △ Less

Submitted 27 December, 2023; originally announced December 2023.

On-chip Lithium Niobate Heterogeneous Photonic Crystal Nanocavity Laser

Authors: Xiangmin Liu, Rui Ge, Chengyu Chen, Jiangwei Wu, Yuping Chen, Xianfeng Chen

Abstract: Thin film lithium niobate (TFLN) has become an platform for modern integrated circuits due to its excellent optical properties. With the development of rare earth ion doped TFLN, important breakthroughs of on-chip microlasers has emerged and show significant application for optical communication, computing and quantum photonics. However, challenges still remain in developing compact lasers with sm… ▽ More Thin film lithium niobate (TFLN) has become an platform for modern integrated circuits due to its excellent optical properties. With the development of rare earth ion doped TFLN, important breakthroughs of on-chip microlasers has emerged and show significant application for optical communication, computing and quantum photonics. However, challenges still remain in developing compact lasers with small mode volumes and low threshold on rare earth ion doped TFLN for highly efficient dense integration. In this letter, we fabricated a heterogeneous photonic crystal (PhC) nanobeam cavity on erbium-doped TFLN with a quality factor of 1.2\times10^4 and firstly demonstrated a single-mode integrated PhC laser with submicron mode volume on TFLN platform. Laser at 1559.63 nm is achieved with the 974 nm single-mode pump. The effective mode volume is 1.44 (λ/n)^3 (~ 0.645 μm^3) and the threshold power is 163 μW. Enhanced photorefractive effect in the PhC cavity is measured. This lithium niobate photonic crystal nanocavity laser, as a compact telecommunication C-band on-chip light source, would benefit the progress of high-speed and low-cost optical community on TFLN integrated photonics. △ Less

Submitted 24 December, 2023; originally announced December 2023.

Properties of an interplanetary shock observed at 0.07 and 0.7 Astronomical Units by Parker Solar Probe and Solar Orbiter

Authors: D. Trotta, A. Larosa, G. Nicolaou, T. S. Horbury, L. Matteini, H. Hietala, X. Blanco-Cano, L. Franci, C. H. K. Chen, L. Zhao, G. P. Zank, C. M. S. Cohen, S. D. Bale, R. Laker, N. Fargette, F. Valentini, Y. Khotyaintsev, R. Kieokaew, N. Raouafi, E. Davies, R. Vainio, N. Dresing, E. Kilpua, T. Karlsson, C. J. Owen , et al. (1 additional authors not shown)

Abstract: The Parker Solar Probe (PSP) and Solar Orbiter (SolO) missions opened a new observational window in the inner heliosphere, which is finally accessible to direct measurements. On September 05, 2022, a coronal mass ejection (CME)-driven interplanetary (IP) shock has been observed as close as 0.07 au by PSP. The CME then reached SolO, which was well radially-aligned at 0.7 au, thus providing us with… ▽ More The Parker Solar Probe (PSP) and Solar Orbiter (SolO) missions opened a new observational window in the inner heliosphere, which is finally accessible to direct measurements. On September 05, 2022, a coronal mass ejection (CME)-driven interplanetary (IP) shock has been observed as close as 0.07 au by PSP. The CME then reached SolO, which was well radially-aligned at 0.7 au, thus providing us with the opportunity to study the shock properties at so different heliocentric distances. We characterize the shock, investigate its typical parameters and compare its small-scale features at both locations. Using the PSP observations, we investigate how magnetic switchbacks and ion cyclotron waves are processed upon shock crossing. We find that switchbacks preserve their V--B correlation while compressed upon the shock passage, and that the signature of ion cyclotron waves disappears downstream of the shock. By contrast, the SolO observations reveal a very structured shock transition, with a population of shock-accelerated protons of up to about 2 MeV, showing irregularities in the shock downstream, which we correlate with solar wind structures propagating across the shock. At SolO, we also report the presence of low-energy ($\sim$ 100 eV) electrons scattering due to upstream shocklets. This study elucidates how the local features of IP shocks and their environments can be very different as they propagate through the heliosphere. △ Less

Submitted 10 December, 2023; originally announced December 2023.

Comments: In review in ApJ

Astronomy as a Field: A Guide for Aspiring Astrophysicists

Authors: Ava Polzin, Yasmeen Asali, Sanah Bhimani, Madison Brady, Mandy C. Chen, Lindsay DeMarchi, Michelle Gurevich, Emily Lichko, Emma Louden, Julie Malewicz, Samantha Pagan, Malena Rice, Zili Shen, Emily Simon, Candice Stauffer, J. Luna Zagorac, Katie Auchettl, Katelyn Breivik, Hsiao-Wen Chen, Deanne Coppejans, Sthabile Kolwa, Raffaella Margutti, Priyamvada Natarajan, Erica Nelson, Kim L. Page , et al. (3 additional authors not shown)

Abstract: This book was created as part of the SIRIUS B VERGE program to orient students to astrophysics as a broad field. The 2023-2024 VERGE program and the printing of this book is funded by the Women and Girls in Astronomy Program via the International Astronomical Union's North American Regional Office of Astronomy for Development and the Heising-Simons Foundation; as a result, this document is written… ▽ More This book was created as part of the SIRIUS B VERGE program to orient students to astrophysics as a broad field. The 2023-2024 VERGE program and the printing of this book is funded by the Women and Girls in Astronomy Program via the International Astronomical Union's North American Regional Office of Astronomy for Development and the Heising-Simons Foundation; as a result, this document is written by women in astronomy for girls who are looking to pursue the field. However, given its universal nature, the material covered in this guide is useful for anyone interested in pursuing astrophysics professionally. △ Less

Submitted 26 December, 2023; v1 submitted 7 December, 2023; originally announced December 2023.

Comments: Introductory guide for students interested in pursuing astrophysics; to be submitted to BAAS

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Fiber-based Ratiometric Optical Thermometry with Silicon-Vacancy in Microdiamonds

Authors: Md Shakhawath Hossain, Miguel Bacaoco, Thi Ngoc Anh Mai, Guillaume Ponchon, Chaohao Chen, Lei Ding, Yongliang Chen, Evgeny Ekimov, Helen Xu, Alexander S. Solntsev, Toan Trong Tran

Abstract: Fiber optic all-optical thermometry is a promising technology to track temperature at a micro-scale while designing efficient and reliable microelectronic devices and components. In this work, we demonstrate a novel real-time ratiometric fiber optic thermometry technique based on silicon-vacancy (SiV) diamond that shows the highest temperature resolution (22.91 KHz^(-1/2) Wcm^(-2)) and spatial res… ▽ More Fiber optic all-optical thermometry is a promising technology to track temperature at a micro-scale while designing efficient and reliable microelectronic devices and components. In this work, we demonstrate a novel real-time ratiometric fiber optic thermometry technique based on silicon-vacancy (SiV) diamond that shows the highest temperature resolution (22.91 KHz^(-1/2) Wcm^(-2)) and spatial resolution (~7.5 um) among all-optical fiber-based thermosensors reported to date. Instead of analyzing the spectral features of temperature-dependent SiV signal, coming from SiV micro-diamond fixed on the fiber tip, an alternative parallel detection method based on filtering optics and photon counters is proposed to read out the sample temperature in real-time. The signal collection efficiency of the fiber is also investigated numerically with semi-analytic ray-optical analysis and then compared with our experimental study. We finally demonstrate the performance of the thermosensor by monitoring the temperature at distinct locations in a lab-built graphite-based microheater device. Our work introduces a reconfigurable method for temperature monitoring in microelectronic, microfluidic devices, or biological environments and unlocks a new direction for fiber-based all-optical thermometry research. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Cryogenic Thermal Shock Effects on Optical Properties of Quantum Emitters in Hexagonal Boron Nitride

Authors: Thi Ngoc Anh Mai, Sajid Ali, Md Shakhawath Hossain, Chaohao Chen, Lei Ding, Yongliang Chen, Alexander S. Solntsev, Hongwei Mou, Xiaoxue Xu, Nikhil Medhekar, Toan Trong Tran

Abstract: Solid-state quantum emitters are vital building blocks for quantum information science and quantum technology. Among various types of solid-state emitters discovered to date, color centers in hexagonal boron nitride have garnered tremendous traction in recent years thanks to their environmental robustness, high brightness and room-temperature operation. Most recently, these quantum emitters have b… ▽ More Solid-state quantum emitters are vital building blocks for quantum information science and quantum technology. Among various types of solid-state emitters discovered to date, color centers in hexagonal boron nitride have garnered tremendous traction in recent years thanks to their environmental robustness, high brightness and room-temperature operation. Most recently, these quantum emitters have been employed for satellite-based quantum key distribution. One of the most important requirements to qualify these emitters for space-based applications is their optical stability against cryogenic thermal shock. Such understanding has, however, remained elusive to date. Here, we report on the effects caused by such thermal shock which induces random, irreversible changes in the spectral characteristics of the quantum emitters. By employing a combination of structural characterizations and density functional calculations, we attribute the observed changes to lattice strains caused by the cryogenic temperature shock. Our study shed light on the stability of the quantum emitters under extreme conditions, similar to those countered in outer space. △ Less

Submitted 28 November, 2023; originally announced November 2023.

π-π Interaction-facilitated formation of interwoven trimeric cage-catenanes with topological chirality

Authors: Lihua Chen, Zhenghong Chen, Weihao Wang, Chenhao Chen, Kuboi Yoshiaki, Chi Zhang, Chenfei Li, Shaodong Zhang

Abstract: Catenanes as interlocked molecules with a nonplanar graph have gained increasing attention for their unique features such as topological chirality. To date, the majority of research in this field has been focusing on catenanes comprising monocyclic rings. Due to the lack of rational synthetic strategy, catenanes of cage-like monomers are hardly accessible. Here we report on the construction of an… ▽ More Catenanes as interlocked molecules with a nonplanar graph have gained increasing attention for their unique features such as topological chirality. To date, the majority of research in this field has been focusing on catenanes comprising monocyclic rings. Due to the lack of rational synthetic strategy, catenanes of cage-like monomers are hardly accessible. Here we report on the construction of an interwoven trimeric catenane that is composed of achiral organic cages, which exhibits topological chirality. Our rational design begins with a pure mathematical analysis, revealing that the formation probability of the interwoven trimeric catenane surpasses that of its chain-like analogue by 20%; while driven by efficient template effect provided by strong π-π stacking of aromatic panels, the interwoven structure emerges as the dominant species, almost ruling out the formation of the chain-like isomer. Its topological chirality is unambiguously unravelled by chiral-HPLC, CD spectroscopy and X-ray diffraction. Our probability analysis-aided rational design strategy would pave a new venue for the efficient synthesis of topologically sophisticated structures in one pot. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Self-Amplification-Assisted Highly Efficient Integrated Laser

Authors: Jiangwei Wu, Xiongshuo Yan, Xueyi Wang, Tingge Yuan, Chengyu Chen, Hao Li, Yuping Chen, Xianfeng Chen

Abstract: Light source is indispensable component in on-chip system. Compared with hybrid or heterogeneous integrated laser, monolithically integrated laser is more suitable for high density photonic integrated circuit (PIC) since the capability of large-scale manufacturing, lower active-passive coupling loss and less test complexity. Recent years have seen the spark of researches on rare-earth ion doped th… ▽ More Light source is indispensable component in on-chip system. Compared with hybrid or heterogeneous integrated laser, monolithically integrated laser is more suitable for high density photonic integrated circuit (PIC) since the capability of large-scale manufacturing, lower active-passive coupling loss and less test complexity. Recent years have seen the spark of researches on rare-earth ion doped thin film lithium niobate (REI:TFLN), demonstrations have been made both in classical and quantum chips. However, low output power and limited quantum emitting efficiency hinder the application of the chip-scale laser source based on REI:TFLN. Here a highly efficient integrated laser assisted by cascaded amplifiers is proposed and experimentally prepared on Erbium-doped TFLN. A slope efficiency of 0.43% and a linewidth of 47.86 kHz are obtained. The maximum integrated laser power is 7.989 μW. Our results show a viable solution to improve efficiency by self-amplification without changing the intrinsic quantum emitting efficiency of the material, and our design has potential application in incorporating with functional devices such as optical communications, integrated quantum memory and quantum emission. △ Less

Submitted 1 December, 2023; v1 submitted 25 November, 2023; originally announced November 2023.

Ultrathin liquid crystal metasurface for on-demand terahertz beam forming over 110° field-of-view

Authors: Chen Chen, Sai Chen, Yibo Ni, Yibao Xu, Yuanmu Yang

Abstract: The terahertz spectral region, which bridges between electronics and optics, is poised to play an important role in the development of transformative wireless communication and imaging systems with unprecedented functionality. Currently, a major challenge in terahertz technology is to develop high-performance terahertz beam-forming devices that can dynamically shape the terahertz radiation in a fl… ▽ More The terahertz spectral region, which bridges between electronics and optics, is poised to play an important role in the development of transformative wireless communication and imaging systems with unprecedented functionality. Currently, a major challenge in terahertz technology is to develop high-performance terahertz beam-forming devices that can dynamically shape the terahertz radiation in a flexible manner. Existing terahertz beam-forming devices have limited coding bits, field-of-view, and beam gain. Here, we experimentally demonstrate a reconfigurable liquid crystal-integrated terahertz metasurface, with each metasurface unit cell being independently addressable. The metasurface has a 260° continuous phase tuning range with a device thickness of only 1% of the free-space wavelength. We show that the terahertz wave diffracted from the metasurface can be steered towards a wide range of directions, covering a record-large 110° field-of-view with a peak gain of 25 dBi. The metasurface also features a low power consumption and sub-second switching time. Furthermore, we demonstrate the formation of multiple terahertz beams, with the direction of each beam and the power ratio between beams adjustable on demand. The proposed liquid crystal metasurface possesses compelling prospects for future terahertz communication and imaging applications. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Spectroscopy of elementary excitations from quench dynamics in a dipolar XY Rydberg simulator

Authors: Cheng Chen, Gabriel Emperauger, Guillaume Bornet, Filippo Caleca, Bastien Gély, Marcus Bintz, Shubhayu Chatterjee, Vincent Liu, Daniel Barredo, Norman Y. Yao, Thierry Lahaye, Fabio Mezzacapo, Tommaso Roscilde, Antoine Browaeys

Abstract: We use a Rydberg quantum simulator to demonstrate a new form of spectroscopy, called quench spectroscopy, which probes the low-energy excitations of a many-body system. We illustrate the method on a two-dimensional simulation of the spin-1/2 dipolar XY model. Through microscopic measurements of the spatial spin correlation dynamics following a quench, we extract the dispersion relation of the elem… ▽ More We use a Rydberg quantum simulator to demonstrate a new form of spectroscopy, called quench spectroscopy, which probes the low-energy excitations of a many-body system. We illustrate the method on a two-dimensional simulation of the spin-1/2 dipolar XY model. Through microscopic measurements of the spatial spin correlation dynamics following a quench, we extract the dispersion relation of the elementary excitations for both ferro- and anti-ferromagnetic couplings. We observe qualitatively different behaviors between the two cases that result from the long-range nature of the interactions, and the frustration inherent in the antiferromagnet. In particular, the ferromagnet exhibits elementary excitations behaving as linear spin waves. In the anti-ferromagnet, spin waves appear to decay, suggesting the presence of strong nonlinearities. Our demonstration highlights the importance of power-law interactions on the excitation spectrum of a many-body system. △ Less

Submitted 12 July, 2024; v1 submitted 20 November, 2023; originally announced November 2023.

Comments: Main text 8 pages with 4 figures ; Supplemental Material 16 pages and 13 figures

A low-delay reference tracking algorithm for microwave measurement and control

Authors: J. F. Zhu, H. L. Ding, H. K. Li, J. W. Han, X. W. Dai, Z. C. Chen, J. Y. Yang, W. Q. Zhang

Abstract: In FEL (Free-Electron Laser) accelerators, LLRF (Low-Level Radiofrequency) systems usually deploy feedback or feedforward algorithms requiring precise microwave measurement. The slow drift of the clock allocation network of LLRF significantly impacts the measured microwave phase, thereby affecting the stability of the closed-loop operation. The reference tracking algorithm is used to eliminate the… ▽ More In FEL (Free-Electron Laser) accelerators, LLRF (Low-Level Radiofrequency) systems usually deploy feedback or feedforward algorithms requiring precise microwave measurement. The slow drift of the clock allocation network of LLRF significantly impacts the measured microwave phase, thereby affecting the stability of the closed-loop operation. The reference tracking algorithm is used to eliminate the measurement drift. The conventional algorithm is to perform phase and amplitude demodulation on the synchronous reference signal from the main oscillator and subtract the reference phase in other measurement channels. The demodulation is usually based on the CORDIC, which requires approximately 16 clock cycles in FPGA (Field Programmable Gate Arrays). This paper uses the multiplication of complex numbers, which only requires four clock cycles of computational delay and achieves phase subtraction point by point. However, experiments show that it causes irrelevant amplitude noise to overlap and increase the amplitude measurement noise. Nevertheless, this reference tracking algorithm is suitable for control algorithms with low-delay requirements of microwave measurement. △ Less

Submitted 24 October, 2023; originally announced November 2023.

Comments: Poster presented at LLRF Workshop 2023 (LLRF2023, arXiv: 2310.03199)

Report number: LLRF2023/18

Non-Volatile Control of Valley Polarized Emission in 2D WSe2-AlScN Heterostructures

Authors: Simrjit Singh, Kwan-Ho Kim, Kiyoung Jo, Pariasadat Musavigharavi, Bumho Kim, Jeffrey Zheng, Nicholas Trainor, Chen Chen, Joan M. Redwing, Eric A Stach, Roy H Olsson III, Deep Jariwala

Abstract: Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-eff… ▽ More Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-effect transistors using a ML-WSe2 channel and a AlScN ferroelectric dielectric, and experimentally demonstrate efficient tuning as well as non-volatile control of valley polarization. We measured a large array of transistors and obtained a maximum valley polarization of ~27% at 80 K with stable retention up to 5400 secs. The enhancement in the valley polarization was ascribed to the efficient exciton-to-trion (X-T) conversion and its coupling with an out-of-plane electric field, viz. the quantum-confined Stark effect. This changes the valley depolarization pathway from strong exchange interactions to slow spin-flip intervalley scattering. Our research demonstrates a promising approach for achieving non-volatile control over valley polarization and suggests new design principles for practical valleytronic devices. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: Manuscript (22 pages and 5 figures), supporting information

Overcoming the Size Limit of First Principles Molecular Dynamics Simulations with an In-Distribution Substructure Embedding Active Learner

Authors: Lingyu Kong, Jielan Li, Lixin Sun, Han Yang, Hongxia Hao, Chi Chen, Nongnuch Artrith, Jose Antonio Garrido Torres, Ziheng Lu, Yichi Zhou

Abstract: Large-scale first principles molecular dynamics are crucial for simulating complex processes in chemical, biomedical, and materials sciences. However, the unfavorable time complexity with respect to system sizes leads to prohibitive computational costs when the simulation contains over a few hundred atoms in practice. We present an In-Distribution substructure Embedding Active Learner (IDEAL) to e… ▽ More Large-scale first principles molecular dynamics are crucial for simulating complex processes in chemical, biomedical, and materials sciences. However, the unfavorable time complexity with respect to system sizes leads to prohibitive computational costs when the simulation contains over a few hundred atoms in practice. We present an In-Distribution substructure Embedding Active Learner (IDEAL) to enable efficient simulation of large complex systems with quantum accuracy by maintaining a machine learning force field (MLFF) as an accurate surrogate to the first principles methods. By extracting high-uncertainty substructures into low-uncertainty atom environments, the active learner is allowed to concentrate on and learn from small substructures of interest rather than carrying out intractable quantum chemical computations on large structures. IDEAL is benchmarked on various systems and shows sub-linear complexity, accelerating the simulation thousands of times compared with conventional active learning and millions of times compared with pure first principles simulations. To demonstrate the capability of IDEAL in practical applications, we simulated a polycrystalline lithium system composed of one million atoms and the full ammonia formation process in a Haber-Bosch reaction on a 3-nm Iridium nanoparticle catalyst on a computing node comprising one single A100 GPU and 24 CPU cores. △ Less

Submitted 14 November, 2023; v1 submitted 14 November, 2023; originally announced November 2023.

A Computationally Efficient Hybrid Neural Network Architecture for Porous Media: Integrating CNNs and GNNs for Improved Permeability Prediction

Authors: Qingqi Zhao, Xiaoxue Han, Ruichang Guo, Cheng Chen

Abstract: Subsurface fluid flow, essential in various natural and engineered processes, is largely governed by a rock's permeability, which describes its ability to allow fluid passage. While convolutional neural networks (CNNs) have been employed to estimate permeability from high-resolution 3D rock images, our novel visualization technology reveals that they occasionally miss higher-level characteristics,… ▽ More Subsurface fluid flow, essential in various natural and engineered processes, is largely governed by a rock's permeability, which describes its ability to allow fluid passage. While convolutional neural networks (CNNs) have been employed to estimate permeability from high-resolution 3D rock images, our novel visualization technology reveals that they occasionally miss higher-level characteristics, such as nuanced connectivity and flow paths, within porous media. To address this, we propose a novel fusion model to integrate CNN with the graph neural network (GNN), which capitalizes on graph representations derived from pore network model to capture intricate relational data between pores. The permeability prediction accuracy of the fusion model is superior to the standalone CNN, whereas its total parameter number is nearly two orders of magnitude lower than the latter. This innovative approach not only heralds a new frontier in the research of digital rock property predictions, but also demonstrates remarkable improvements in prediction accuracy and efficiency, emphasizing the transformative potential of hybrid neural network architectures in subsurface fluid flow research. △ Less

Submitted 10 November, 2023; originally announced November 2023.

High Performance Thin-film Lithium Niobate Modulator Applied ITO Composite Electrode with Modulation Efficiency of 1V*cm

Authors: Xiangyu Meng, Can Yuan, Xingran Cheng, Shuai Yuan, Chenglin Shang, An Pan, Zhicheng Qu, Xuanhao Wang, Peijie Zhang, Chengcheng Gui, Chao Chen, Cheng Zeng, Jinsong Xia

Abstract: Thin film lithium niobate (TFLN) based electro-optic modulator is widely applied in the field of broadband optical communications due to its advantages such as large bandwidth, high extinction ratio, and low optical loss, bringing new possibilities for the next generation of high-performance electro-optic modulators. However, the modulation efficiency of TFLN modulators is still relatively low whe… ▽ More Thin film lithium niobate (TFLN) based electro-optic modulator is widely applied in the field of broadband optical communications due to its advantages such as large bandwidth, high extinction ratio, and low optical loss, bringing new possibilities for the next generation of high-performance electro-optic modulators. However, the modulation efficiency of TFLN modulators is still relatively low when compared with Silicon and Indium-Phosphide (InP) based competitors. Due to the restriction of the trade-off between half-wave voltage and modulation length, it is difficult to simultaneously obtain low driving voltage and large modulating bandwidth. Here, we break this limitation by introducing Transparent Conductive Oxide (TCO) film, resulting in an ultra-high modulation efficiency of 1.02 V*cm in O-Band. The fabricated composite electrode not only achieves high modulation efficiency but also maintains a high electro-optic bandwidth, as demonstrated by the 3 dB roll-off at 108 GHz and the transmission of PAM-4 signals at 224 Gbit/s. Our device presents new solutions for the next generation of low-cost high-performance electro-optic modulators. Additionally, it paves the way for downsizing TFLN-based multi-channel optical transmitter chips. △ Less

Submitted 8 November, 2023; originally announced November 2023.

Comments: 16 pages, 8 figures

Optical pumping of ${\mathrm{5s4d} ^1\mathrm{D}_2}$ strontium atoms for laser cooling and imaging

Authors: Jens Samland, Shayne Bennetts, Chun-Chia Chen, Rodrigo González Escudero, Florian Schreck, Benjamin Pasquiou

Abstract: We present a faster repumping scheme for strontium magneto-optical traps operating on the broad ${\mathrm{5s^2} ^1\mathrm{S}_0} - {\mathrm{5s5p} ^1\mathrm{P}_1}$ laser cooling transition. Contrary to existing repumping schemes, we directly address lost atoms that spontaneously decayed to the ${\mathrm{5s4d} ^1\mathrm{D}_2}$ state, sending them back into the laser cooling cycle by optical pumping o… ▽ More We present a faster repumping scheme for strontium magneto-optical traps operating on the broad ${\mathrm{5s^2} ^1\mathrm{S}_0} - {\mathrm{5s5p} ^1\mathrm{P}_1}$ laser cooling transition. Contrary to existing repumping schemes, we directly address lost atoms that spontaneously decayed to the ${\mathrm{5s4d} ^1\mathrm{D}_2}$ state, sending them back into the laser cooling cycle by optical pumping on the ${\mathrm{5s4d} ^1\mathrm{D}_2} - {\mathrm{5s8p} ^1\mathrm{P}_1}$ transition. We thus avoid the $\sim 100 \, \mathrm{μs}$-slow decay path from ${\mathrm{5s4d} ^1\mathrm{D}_2}$ to the ${\mathrm{5s5p} ^3\mathrm{P}_{1,2}}$ states that is part of other repumping schemes. Using one low-cost external-cavity diode laser emitting at $448 \, \mathrm{nm}$, we show our scheme increases the flux out of a 2D magneto-optical trap by $60 \, \%$ compared to without repumping. Furthermore, we perform spectroscopy on the ${\mathrm{5s4d} ^1\mathrm{D}_2} - {\mathrm{5s8p} ^1\mathrm{P}_1}$ transition and measure its frequency $ν_{\mathrm{^{88}Sr}} = (668917515.3 \pm 4.0 \pm 25) \, \mathrm{MHz}$. We also measure the frequency shifts between the four stable isotopes of strontium and infer the specific mass and field shift factors, $δν_\text{SMS} ^{88,86} = -267(45) \, \mathrm{MHz}$ and $δν_\text{FS} ^{88,86} = 2(42) \, \mathrm{MHz}$. Finally, we measure the hyperfine splitting of the ${\mathrm{5s8p} ^1\mathrm{P}_1}$ state in fermionic strontium, and deduce the magnetic dipole and electric quadrupole coupling coefficients $A = -4(5) \, \mathrm{MHz}$ and $B = 5(35) \, \mathrm{MHz}$. Our experimental demonstration shows that this simple and very fast scheme could improve the laser cooling and imaging performance of cold strontium atom devices, such as quantum computers based on strontium atoms in arrays of optical tweezers. △ Less

Submitted 23 February, 2024; v1 submitted 6 November, 2023; originally announced November 2023.

Comments: 10 pages, 5 figures

Journal ref: Phys. Rev. Research 6, 013319 (2024)

A mathematical study of joint image reconstruction and motion estimation using optimal control

Authors: Zhentong Wei, Chong Chen

Abstract: Spatiotemporal dynamic medical imaging is critical in clinical applications, such as tomographic imaging of the heart or lung. To address such kind of spatiotemporal imaging problems, essentially, a time-dependent dynamic inverse problem, the variational model with intensity, edge feature and topology preservations was proposed for joint image reconstruction and motion estimation in the previous p… ▽ More Spatiotemporal dynamic medical imaging is critical in clinical applications, such as tomographic imaging of the heart or lung. To address such kind of spatiotemporal imaging problems, essentially, a time-dependent dynamic inverse problem, the variational model with intensity, edge feature and topology preservations was proposed for joint image reconstruction and motion estimation in the previous paper [C. Chen, B. Gris, and O. Öktem, SIAM J. Imaging Sci., 12 (2019), pp. 1686--1719], which is suitable to invert the time-dependent sparse sampling data for the motion target with large diffeomorphic deformations. However, the existence of solution to the model has not been given yet. In order to preserve its topological structure and edge feature of the motion target, the unknown velocity field in the model is restricted into the admissible Hilbert space, and the unknown template image is modeled in the space of bounded variation functions. Under this framework, this paper analyzes and proves the solution existence of its time-discretized version from the point view of optimal control. Specifically, there exists a constraint of transport equation in the equivalent optimal control model. We rigorously demonstrate the closure of the equation, including the solution existence and uniqueness, the stability of the associated nonlinear solution operator, and the convergence. Finally, the solution existence of that model can be concluded. △ Less

Submitted 20 October, 2023; originally announced October 2023.

Comments: 29 pages

MSC Class: 49J20; 65L09; 45Q05

Dynamics and frictional dissipation from treading in the puddle

Authors: Chung-Hao Chen, Zong-Rou Jiang, Tzay-Ming Hong

Abstract: It was recently established that dogs share the same lapping technique as cats by flicking their tongue against the water surface and then yanking it back, dragging up a column of water. This liquid column appears frequently in daily life and industrial applications, such as walking through a puddle and roller printing. While governed by the Navier-Stokes equation, its dynamics are often studied b… ▽ More It was recently established that dogs share the same lapping technique as cats by flicking their tongue against the water surface and then yanking it back, dragging up a column of water. This liquid column appears frequently in daily life and industrial applications, such as walking through a puddle and roller printing. While governed by the Navier-Stokes equation, its dynamics are often studied by numerical means, which hinders a full understanding of the rich mixture of physics behind, for instance, the competition of surface and potential energies, and how the pinch-off is affected by the kinetic energy and water jet when a large cylinder is used. Combined with simple models, we elucidate the mechanism that drives the change of morphology and derive analytic expressions for the critical height and upper radius for the liquid column when transiting between three stages. Stage I is characterized by a static and reversible profile for the column whose upper radius r_t equals that of the cylinder. The column becomes irreversible and $r_t$ starts shrinking upon entering stage II. It is not until r_t stops shrinking that the column neck accelerates its contraction and descends toward the pool, the quantitative behavior of which is among the successful predictions of our theory. Pinch-off dominates the second half of stage III without its usual signature of self-similarity. This is discussed and explained with an interesting incident involving a water jet similar to that made by a dropping stone. △ Less

Submitted 18 May, 2024; v1 submitted 15 October, 2023; originally announced October 2023.

Comments: 8 pages, 11 figures