-
Single-mode emission by phase-delayed coupling between nano-lasers
Authors:
T. V. Raziman,
Anna Fischer,
Riccardo Nori,
Anthony Chan,
Wai Kit Ng,
Dhruv Saxena,
Ortwin Hess,
Korneel Molkens,
Ivo Tanghe,
Pieter Geiregat,
Dries Van Thourhout,
Mauricio Barahona,
Riccardo Sapienza
Abstract:
Near-field coupling between nanolasers enables collective high-power lasing but leads to complex spectral reshaping and multimode operation, limiting the emission brightness, spatial coherence and temporal stability. Many lasing architectures have been proposed to circumvent this limitation, based on symmetries, topology, or interference. We show that a much simpler and robust method exploiting ph…
▽ More
Near-field coupling between nanolasers enables collective high-power lasing but leads to complex spectral reshaping and multimode operation, limiting the emission brightness, spatial coherence and temporal stability. Many lasing architectures have been proposed to circumvent this limitation, based on symmetries, topology, or interference. We show that a much simpler and robust method exploiting phase-delayed coupling, where light exchanged by the lasers carries a phase, can enable stable single-mode operation. Phase-delayed coupling changes the modal amplification: for pump powers close to the anyonic parity-time (PT) symmetric exceptional point, a high phase delay completely separates the mode thresholds, leading to single mode operation. This is shown by stability analysis with nonlinear coupled mode theory and stochastic differential equations for two coupled nanolasers and confirmed by realistic semi-analytical treatment of a dimer of lasing nanospheres. Finally, we extend the mode control to large arrays of nanolasers, featuring lowered thresholds and higher power. Our work promises a novel solution to engineer bright and stable single-mode lasing from nanolaser arrays with important applications in photonic chips for communication and lidars.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
On the 96-well plate coverglass tilt and curvature suppression in 96-camera imaging system
Authors:
Antony C Chan
Abstract:
The 96-eyes instrument is capable of computational extended depth of focus (eDOF) of up to +/- 30 micrometer in the phase channel, and conventional depth of field (DOF) of +/- 5 micrometer in the fluorescence channel. However, it requires minimal plate-to-plate cover glass depth variation to function. Plate depths are measured using a third-party plate scanner (Opera Phenix) grouped by plate types…
▽ More
The 96-eyes instrument is capable of computational extended depth of focus (eDOF) of up to +/- 30 micrometer in the phase channel, and conventional depth of field (DOF) of +/- 5 micrometer in the fluorescence channel. However, it requires minimal plate-to-plate cover glass depth variation to function. Plate depths are measured using a third-party plate scanner (Opera Phenix) grouped by plate types (Greiner UV-Star, Cell-Star, and Eppendorf meniscus-free). The two-dimensional (2D) depth dataset is aggregated through principal component analysis to obtain the top eight dominating 2D surface deformation modes. More than 90% of the variation can be explained by the plate's absolute depth and tilt (Pitch, Gradient-Y, and Gradient-X), followed by (~= 2%) the cover glass's curvature (Curve-Y and Curve-XY). Plate-to-plate average depth and tilt variations are suppressed by a customized kinematic mount anchoring the plate's cover glass at the instrument's imaging plane. The plate's average curvature is compensated by manually aligning all 96-eyes microscope objective lenses to track the plate's surface; an one-off calibration procedure aided by the backlash-free piezo-flexure z-stage. Design validation is conducted in silico, with the proof of concept experiment conducted on the 96-eyes with new mounting bracket retrofits.
△ Less
Submitted 13 March, 2024;
originally announced June 2024.
-
A Classification-Based Adaptive Segmentation Pipeline: Feasibility Study Using Polycystic Liver Disease and Metastases from Colorectal Cancer CT Images
Authors:
Peilong Wang,
Timothy L. Kline,
Andy D. Missert,
Cole J. Cook,
Matthew R. Callstrom,
Alex Chan,
Robert P. Hartman,
Zachary S. Kelm,
Panagiotis Korfiatis
Abstract:
Automated segmentation tools often encounter accuracy and adaptability issues when applied to images of different pathology. The purpose of this study is to explore the feasibility of building a workflow to efficiently route images to specifically trained segmentation models. By implementing a deep learning classifier to automatically classify the images and route them to appropriate segmentation…
▽ More
Automated segmentation tools often encounter accuracy and adaptability issues when applied to images of different pathology. The purpose of this study is to explore the feasibility of building a workflow to efficiently route images to specifically trained segmentation models. By implementing a deep learning classifier to automatically classify the images and route them to appropriate segmentation models, we hope that our workflow can segment the images with different pathology accurately. The data we used in this study are 350 CT images from patients affected by polycystic liver disease and 350 CT images from patients presenting with liver metastases from colorectal cancer. All images had the liver manually segmented by trained imaging analysts. Our proposed adaptive segmentation workflow achieved a statistically significant improvement for the task of total liver segmentation compared to the generic single segmentation model (non-parametric Wilcoxon signed rank test, n=100, p-value << 0.001). This approach is applicable in a wide range of scenarios and should prove useful in clinical implementations of segmentation pipelines.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Retrieving positions of closely packed sub-wavelength nanoparticles from their diffraction patterns
Authors:
Benquan Wang,
Ruyi An,
Eng Aik Chan,
Giorgio Adamo,
Jin-Kyu So,
Yewen Li,
Zexiang Shen,
Bo An,
Nikolay I. Zheludev
Abstract:
Distinguishing two objects or point sources located closer than the Rayleigh distance is impossible in conventional microscopy. Understandably, the task becomes increasingly harder with a growing number of particles placed in close proximity. It has been recently demonstrated that subwavelength nanoparticles in closely packed clusters can be counted by AI-enabled analysis of the diffraction patter…
▽ More
Distinguishing two objects or point sources located closer than the Rayleigh distance is impossible in conventional microscopy. Understandably, the task becomes increasingly harder with a growing number of particles placed in close proximity. It has been recently demonstrated that subwavelength nanoparticles in closely packed clusters can be counted by AI-enabled analysis of the diffraction patterns of coherent light scattered by the cluster. Here we show that deep learning analysis can determine the actual position of the nanoparticle in the cluster of subwavelength particles from a sing-shot diffraction pattern even if they are separated by distances below the Rayleigh resolution limit of a conventional microscope.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
GAUCHE: A Library for Gaussian Processes in Chemistry
Authors:
Ryan-Rhys Griffiths,
Leo Klarner,
Henry B. Moss,
Aditya Ravuri,
Sang Truong,
Samuel Stanton,
Gary Tom,
Bojana Rankovic,
Yuanqi Du,
Arian Jamasb,
Aryan Deshwal,
Julius Schwartz,
Austin Tripp,
Gregory Kell,
Simon Frieder,
Anthony Bourached,
Alex Chan,
Jacob Moss,
Chengzhi Guo,
Johannes Durholt,
Saudamini Chaurasia,
Felix Strieth-Kalthoff,
Alpha A. Lee,
Bingqing Cheng,
Alán Aspuru-Guzik
, et al. (2 additional authors not shown)
Abstract:
We introduce GAUCHE, a library for GAUssian processes in CHEmistry. Gaussian processes have long been a cornerstone of probabilistic machine learning, affording particular advantages for uncertainty quantification and Bayesian optimisation. Extending Gaussian processes to chemical representations, however, is nontrivial, necessitating kernels defined over structured inputs such as graphs, strings…
▽ More
We introduce GAUCHE, a library for GAUssian processes in CHEmistry. Gaussian processes have long been a cornerstone of probabilistic machine learning, affording particular advantages for uncertainty quantification and Bayesian optimisation. Extending Gaussian processes to chemical representations, however, is nontrivial, necessitating kernels defined over structured inputs such as graphs, strings and bit vectors. By defining such kernels in GAUCHE, we seek to open the door to powerful tools for uncertainty quantification and Bayesian optimisation in chemistry. Motivated by scenarios frequently encountered in experimental chemistry, we showcase applications for GAUCHE in molecular discovery and chemical reaction optimisation. The codebase is made available at https://github.com/leojklarner/gauche
△ Less
Submitted 21 February, 2023; v1 submitted 6 December, 2022;
originally announced December 2022.
-
Van der Waals heterostructure mid-infrared emitters with electrically controllable polarization states and spectral characteristics
Authors:
Po-Liang Chen,
Tian-Yun Chang,
Pei-Sin Chen,
Alvin Hsien-Yi Chan,
Adzilah Shahna Rosyadi,
Yen-Ju Lin,
Pei-Yu Huang,
Jia-Xin Li,
Wei-Qing Li,
Chia-Jui Hsu,
Neil Na,
Yao-Chang Lee,
Ching-Hwa Ho,
Chang-Hua Liu
Abstract:
Modern infrared (IR) microscopy, communication, and sensing systems demand control of the spectral characteristics and polarization states of light. Typically, these systems require the cascading of multiple filters, polarization optics and rotating components to manipulate light, inevitably increasing their sizes and complexities. Here, we report two-terminal mid-infrared (mid-IR) emitters with e…
▽ More
Modern infrared (IR) microscopy, communication, and sensing systems demand control of the spectral characteristics and polarization states of light. Typically, these systems require the cascading of multiple filters, polarization optics and rotating components to manipulate light, inevitably increasing their sizes and complexities. Here, we report two-terminal mid-infrared (mid-IR) emitters with electrically controllable spectral and polarization properties. Our devices are composed of two back-to-back p-n junctions formed by stacking anisotropic light-emitting materials, black phosphorus and black arsenic-phosphorus with MoS2. By controlling the crystallographic orientations and engineering the band profile of heterostructures, the emissions of two junctions exhibit distinct spectral ranges and polarization directions; more importantly, these two electroluminescence (EL) units can be independently activated, depending on the polarity of the applied bias. Furthermore, we show that when operating our emitter under the polarity-switched pulse mode, its EL exhibits the characteristics of broad spectral coverage, encompassing the entire first mid-IR atmospheric window, and electrically tunable spectral shapes. Our results provide the basis for developing groundbreaking technology in the field of light emitters.
△ Less
Submitted 25 October, 2022;
originally announced October 2022.
-
Hamiltonian Formulations of Quasilinear Theory for Magnetized Plasmas
Authors:
Alain J. Brizard,
Anthony A. Chan
Abstract:
Hamiltonian formulations of quasilinear theory are presented for the cases of uniform and nonuniform magnetized plasmas. First, the standard quasilinear theory of Kennel and Engelmann (1966) is reviewed and reinterpreted in terms of a general Hamiltonian formulation. Within this Hamiltonian representation, we present the transition from two-dimensional quasilinear diffusion in a spatially uniform…
▽ More
Hamiltonian formulations of quasilinear theory are presented for the cases of uniform and nonuniform magnetized plasmas. First, the standard quasilinear theory of Kennel and Engelmann (1966) is reviewed and reinterpreted in terms of a general Hamiltonian formulation. Within this Hamiltonian representation, we present the transition from two-dimensional quasilinear diffusion in a spatially uniform magnetized background plasma to three-dimensional quasilinear diffusion in a spatially nonuniform magnetized background plasma based on our previous work Brizard_Chan (2001,2004). The resulting quasilinear theory for nonuniform magnetized plasmas yields a $3\times 3$ diffusion tensor that naturally incorporates quasilinear radial diffusion as well as its synergistic connections to diffusion in two-dimensional invariant velocity space (e.g., energy and pitch angle).
△ Less
Submitted 22 August, 2022; v1 submitted 19 August, 2022;
originally announced August 2022.
-
Picophotonics -- Subatomic Optical Localization Beyond Thermal Fluctuations
Authors:
Tongjun Liu,
Cheng-Hung Chi,
Jun-Yu Ou,
Jie Xu,
Eng Aik Chan,
Kevin F. MacDonald,
Nikolay I. Zheludev
Abstract:
Despite recent tremendous progress in optical imaging and metrology, the resolution gap between atomic scale transmission electron microscopy and optical techniques has not been closed. Is optical imaging and metrology of nanostructures exhibiting Brownian motion possible with resolution beyond thermal fluctuations? Here we report on an experiment in which the average position of a nanowire with a…
▽ More
Despite recent tremendous progress in optical imaging and metrology, the resolution gap between atomic scale transmission electron microscopy and optical techniques has not been closed. Is optical imaging and metrology of nanostructures exhibiting Brownian motion possible with resolution beyond thermal fluctuations? Here we report on an experiment in which the average position of a nanowire with a thermal oscillation amplitude of ~150 pm is resolved in single-shot measurements with precision of 92 pm using light at a wavelength of λ = 488 nm, providing the first example of such sub-Brownian metrology with ~λ/5,300 precision. To localize the nanowire, we employ a deep learning analysis of the scattering of topologically structured light, which is highly sensitive to the nanowire's position. As a non-invasive optical metrology with sub-Brownian absolute errors, down to a fraction of the typical size of an atom (Si: 220 pm diameter), it opens the exciting field of picophotonics.
△ Less
Submitted 30 January, 2023; v1 submitted 3 May, 2022;
originally announced May 2022.
-
Spatial correlations in geographical spreading of COVID-19 in USA
Authors:
Troy McMahon,
Adrian Chan,
Shlomo Havlin,
Lazaros K. Gallos
Abstract:
The global spread of the COVID-19 pandemic has followed complex pathways, largely attributed to the high virus infectivity, human travel patterns, and the implementation of multiple mitigation measures. The resulting geographic patterns describe the evolution of the epidemic and can indicate areas which are at risk of an outbreak. Here, we analyze the spatial correlations of new active cases in US…
▽ More
The global spread of the COVID-19 pandemic has followed complex pathways, largely attributed to the high virus infectivity, human travel patterns, and the implementation of multiple mitigation measures. The resulting geographic patterns describe the evolution of the epidemic and can indicate areas which are at risk of an outbreak. Here, we analyze the spatial correlations of new active cases in USA at the county level and characterize the extent of these correlations at different times. We show that the epidemic did not progress uniformly and we identify various stages which are distinguished by significant differences in the correlation length. Our results indicate that the correlation length may be large even during periods when the number of cases declines. We find that correlations between urban centers were much more significant than between rural areas and this finding indicates that long-range spreading was mainly facilitated by travel between cities, especially at the first months of the epidemic. We also show the existence of a percolation transition in November 2020, when the largest part of the country was connected to a spanning cluster, and a smaller-scale transition in January 2021, with both times corresponding to the peak of the epidemic in the country.
△ Less
Submitted 26 June, 2021;
originally announced June 2021.
-
DEWPython: A Python Implementation of the Deep Earth Water Model and Application to Ocean Worlds
Authors:
Andrew Chan,
Mohit Melwani Daswani,
Steven Vance
Abstract:
There are two main methods of calculating the thermodynamic properties of water and solutes: mass action (including the Helgeson-Kirkham-Flowers (HKF) equations of state and model) and Gibbs free energy minimization (e.g. Leal et al., 2016). However, in certain regions of pressure and temperature the HKF model inaccurately predicts the speciation and concentration of solutes (e.g. Miron et al., 20…
▽ More
There are two main methods of calculating the thermodynamic properties of water and solutes: mass action (including the Helgeson-Kirkham-Flowers (HKF) equations of state and model) and Gibbs free energy minimization (e.g. Leal et al., 2016). However, in certain regions of pressure and temperature the HKF model inaccurately predicts the speciation and concentration of solutes (e.g. Miron et al., 2019). The Deep Earth Water (DEW) model uses a series of HKF-type equations to calculate the properties of water and solute concentrations at high temperatures (373 - 1473 K) and pressures (0.1 - 6 GPa) (e.g. Huang and Sverjensky, 2019; Pan et al., 2013; Sverjensky et al., 2014). The DEW model is synthesized in an Excel spreadsheet and calculates Gibbs energies of formation, equilibrium constants, and standard volume changes for reactions. Here we present an object-oriented Python implementation of the DEW model, called DEWPython. Our model expands on DEW by increasing model efficiency, streamlining the input process, and incorporating SUPCRT in-line. Additionally, our model builds in minerals and aqueous species from the thermodynamic database slop16.dat (Boyer, 2019) which would normally be calculated separately. We also present a set of reactions relevant to icy ocean world interiors calculated with the DEWPython. The favorability of these reactions indicates likely formation of certain organic species under extreme pressures relevant to ocean worlds.
△ Less
Submitted 28 May, 2021;
originally announced May 2021.
-
Geometric characterization of SARS-CoV-2 pandemic events
Authors:
Ivan Bonamassa,
Marcello Calvanese Strinati,
Adrian Chan,
Ouriel Gotesdyner,
Bnaya Gross,
Shlomo Havlin,
Mario Leo
Abstract:
While the SARS-CoV-2 keeps spreading world-wide, comparing its evolution across different nations is a timely challenge of both theoretical and practical importance. The large variety of dissimilar and country-dependent epidemiological factors, in fact, makes extremely difficult to understand their influence on the epidemic trends within a unique and coherent framework. We present a geometric fram…
▽ More
While the SARS-CoV-2 keeps spreading world-wide, comparing its evolution across different nations is a timely challenge of both theoretical and practical importance. The large variety of dissimilar and country-dependent epidemiological factors, in fact, makes extremely difficult to understand their influence on the epidemic trends within a unique and coherent framework. We present a geometric framework to characterize, in an integrated and low-dimensional fashion, the epidemic plume-like trajectories traced by the infection rate, $I$, and the fatality rate, $D$, in the $(I,D)$ plane. Our analysis enables the definition of an epidemiometric system based on three geometric observables rating the SARS-CoV-2 pandemic events via scales analogous to those for the magnitude and the intensity of seismic events. Being exquisitely geometric, our framework can be applied to classify other epidemic data and secondary waves, raising the possibility of designing epidemic alerts or early warning systems to enhance public and governmental responses to a rapidly emerging outbreak.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
Image reconstruction through a multimode fiber with a simple neural network architecture
Authors:
Changyan Zhu,
Eng Aik Chan,
You Wang,
Weina Peng,
Ruixiang Guo,
Baile Zhang,
Cesare Soci,
Yidong Chong
Abstract:
Multimode fibers (MMFs) have the potential to carry complex images for endoscopy and related applications, but decoding the complex speckle patterns produced by mode-mixing and modal dispersion in MMFs is a serious challenge. Several groups have recently shown that convolutional neural networks (CNNs) can be trained to perform high-fidelity MMF image reconstruction. We find that a considerably sim…
▽ More
Multimode fibers (MMFs) have the potential to carry complex images for endoscopy and related applications, but decoding the complex speckle patterns produced by mode-mixing and modal dispersion in MMFs is a serious challenge. Several groups have recently shown that convolutional neural networks (CNNs) can be trained to perform high-fidelity MMF image reconstruction. We find that a considerably simpler neural network architecture, the single hidden layer dense neural network, performs at least as well as previously-used CNNs in terms of image reconstruction fidelity, and is superior in terms of training time and computing resources required. The trained networks can accurately reconstruct MMF images collected over a week after the cessation of the training set, with the dense network performing as well as the CNN over the entire period.
△ Less
Submitted 1 September, 2020; v1 submitted 10 June, 2020;
originally announced June 2020.
-
Optical Metrology of Sub-Wavelength Objects Enabled by Artificial Intelligence
Authors:
Carolina Rendón-Barraza,
Eng Aik Chan,
Guanghui Yuan,
Giorgio Adamo,
Tanchao Pu,
Nikolay I. Zheludev
Abstract:
Microscopes and various forms of interferometers have been used for decades in optical metrology of objects that are typically larger than the wavelength of light λ. However, metrology of subwavelength objects was deemed impossible due to the diffraction limit. We report that measurement of the physical size of sub-wavelength objects with accuracy exceeding λ/800 by analyzing the diffraction patte…
▽ More
Microscopes and various forms of interferometers have been used for decades in optical metrology of objects that are typically larger than the wavelength of light λ. However, metrology of subwavelength objects was deemed impossible due to the diffraction limit. We report that measurement of the physical size of sub-wavelength objects with accuracy exceeding λ/800 by analyzing the diffraction pattern of coherent light scattered by the objects with deep learning enabled analysis. With a 633nm laser, we show that the width of sub-wavelength slits in opaque screen can be measured with accuracy of 0.77nm, challenging the accuracy of electron beam and ion beam lithographies. The technique is suitable for high-rate non-contact measurements of nanometric sizes in smart manufacturing applications with integrated metrology and processing tools.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Plasmono-Atomic Interactions on a Fiber Tip
Authors:
Eng Aik Chan,
Giorgio Adamo,
Syed Abdullah Aljunid,
Martial Ducloy,
Nikolay Zheludev,
David Wilkowski
Abstract:
Light-atom interaction can be engineered by interfacing atoms with various specially designed media and optical fibers are convenient platforms for realization of compact interfaces. Here, we show that an optical fiber sensor bearing a plasmonic metasurface at its tip can be used to detect modifications of the Doppler-free hyperfine atomic spectra induced by coupling between atomic and plasmonic e…
▽ More
Light-atom interaction can be engineered by interfacing atoms with various specially designed media and optical fibers are convenient platforms for realization of compact interfaces. Here, we show that an optical fiber sensor bearing a plasmonic metasurface at its tip can be used to detect modifications of the Doppler-free hyperfine atomic spectra induced by coupling between atomic and plasmonic excitations. We observed the inversion of the phase modulation reflectivity spectra of Cesium vapor in presence of the metamaterial. This work paves the way for future compact hybrid atomic devices with a cleaved tip as substrate platform to host various two-dimensional materials.
△ Less
Submitted 13 May, 2020; v1 submitted 5 December, 2019;
originally announced December 2019.
-
In situ correction of liquid meniscus in cell culture imaging system based on parallel Fourier ptychographic microscopy (96 Eyes)
Authors:
An Pan,
Antony C. S. Chan,
Baoli Yao,
Changhuei Yang
Abstract:
We collaborated with Amgen and spent five years in designing and fabricating next generation multi-well plate imagers based on Fourier ptychographic microscopy (FPM). A 6-well imager (Emsight) and a low-cost parallel microscopic system (96 Eyes) based on parallel FPM were reported in our previous work. However, the effect of liquid meniscus on the image quality is much stronger than anticipated, i…
▽ More
We collaborated with Amgen and spent five years in designing and fabricating next generation multi-well plate imagers based on Fourier ptychographic microscopy (FPM). A 6-well imager (Emsight) and a low-cost parallel microscopic system (96 Eyes) based on parallel FPM were reported in our previous work. However, the effect of liquid meniscus on the image quality is much stronger than anticipated, introducing obvious wavevector misalignment and additional image aberration. To this end, an adaptive wavevector correction (AWC-FPM) algorithm and a pupil recovery improvement strategy are presented to solve these challenges in situ. In addition, dual-channel fluorescence excitation is added to obtain structural information for microbiologists. Experiments are demonstrated to verify their performances. The accuracy of angular resolution with our algorithm is within 0.003 rad. Our algorithms would make the FPM algorithm more robust and practical and can be extended to other FPM-based applications to overcome similar challenges.
△ Less
Submitted 28 December, 2019; v1 submitted 28 November, 2019;
originally announced December 2019.
-
Large optical depth frequency modulation spectroscopy
Authors:
Chang Chi Kwong,
Eng Aik Chan,
Syed Abdullah Aljunid,
Rustem Shakhmuratov,
David Wilkowski
Abstract:
Band-resolved frequency modulation spectroscopy is a common method to measure weak signals of radiative ensembles. When the optical depth of the medium is large, the signal drops exponentially and the technique becomes ineffective. In this situation, we show that a signal can be recovered when a larger modulation index is applied. Noticeably, this signal can be dominated by the natural linewidth o…
▽ More
Band-resolved frequency modulation spectroscopy is a common method to measure weak signals of radiative ensembles. When the optical depth of the medium is large, the signal drops exponentially and the technique becomes ineffective. In this situation, we show that a signal can be recovered when a larger modulation index is applied. Noticeably, this signal can be dominated by the natural linewidth of the resonance, regardless of the presence of inhomogeneous line broadening. We implement this technique on a cesium vapor, and then explore its main spectroscopic features. This work opens the road towards measurement of cooperative emission effects in bulk atomic ensemble.
△ Less
Submitted 24 October, 2019; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Coupling of atomic quadrupole transitions with resonant surface plasmons
Authors:
Eng Aik Chan,
Syed Abdullah Aljunid,
Giorgio Adamo,
Nikolay I. Zheludev,
Martial Ducloy,
David Wilkowski
Abstract:
We report on the coupling of an electric quadrupole transition in atom with plasmonic excitation in a nanostructured metallic metamaterial. The quadrupole transition at 685 nm in the gas of Cesium atoms is optically pumped, while the induced ground state population depletion is probed with light tuned on the strong electric dipole transition at 852 nm. We use selective reflection to resolve the Do…
▽ More
We report on the coupling of an electric quadrupole transition in atom with plasmonic excitation in a nanostructured metallic metamaterial. The quadrupole transition at 685 nm in the gas of Cesium atoms is optically pumped, while the induced ground state population depletion is probed with light tuned on the strong electric dipole transition at 852 nm. We use selective reflection to resolve the Doppler-free hyperfine structure of Cesium atoms. We observed a strong modification of the reflection spectra at the presence of metamaterial and discuss the role of the spatial variation of the surface plasmon polariton on the quadrupole coupling.
△ Less
Submitted 3 June, 2019; v1 submitted 5 December, 2018;
originally announced December 2018.
-
All-passive pixel super-resolution of time-stretch imaging
Authors:
Antony C. S. Chan,
Ho-Cheung Ng,
Sharat C. V. Bogaraju,
Hayden K. H. So,
Edmund Y. Lam,
Kevin K. Tsia
Abstract:
Based on image encoding in a serial-temporal format, optical time-stretch imaging entails a stringent requirement of state-of-the- art fast data acquisition unit in order to preserve high image resolution at an ultrahigh frame rate --- hampering the widespread utilities of such technology. Here, we propose a pixel super-resolution (pixel-SR) technique tailored for time-stretch imaging that preserv…
▽ More
Based on image encoding in a serial-temporal format, optical time-stretch imaging entails a stringent requirement of state-of-the- art fast data acquisition unit in order to preserve high image resolution at an ultrahigh frame rate --- hampering the widespread utilities of such technology. Here, we propose a pixel super-resolution (pixel-SR) technique tailored for time-stretch imaging that preserves pixel resolution at a relaxed sampling rate. It harnesses the subpixel shifts between image frames inherently introduced by asynchronous digital sampling of the continuous time-stretch imaging process. Precise pixel registration is thus accomplished without any active opto-mechanical subpixel-shift control or other additional hardware. Here, we present the experimental pixel-SR image reconstruction pipeline that restores high-resolution time-stretch images of microparticles and biological cells (phytoplankton) at a relaxed sampling rate (approx. 2--5 GSa/s) --- more than four times lower than the originally required readout rate (20 GSa/s) --- is thus effective for high-throughput label-free, morphology-based cellular classification down to single-cell precision. Upon integration with the high-throughput image processing technology, this pixel-SR time- stretch imaging technique represents a cost-effective and practical solution for large scale cell-based phenotypic screening in biomedical diagnosis and machine vision for quality control in manufacturing.
△ Less
Submitted 16 October, 2016;
originally announced October 2016.
-
Tailoring optical metamaterials to tune the atom-surface Casimir-Polder interaction
Authors:
Eng Aik Chan,
Syed Abdullah Aljunid,
Giorgio Adamo,
Athanasios Laliotis,
Martial Ducloy,
David Wilkowski
Abstract:
Metamaterials are fascinating tools that can structure not only surface plasmons and electromagnetic waves but also electromagnetic vacuum fluctuations. The possibility of shaping the quantum vacuum is a powerful concept that ultimately allows engineering the interaction between macroscopic surfaces and quantum emitters such as atoms, molecules or quantum dots. The long-range atom-surface interact…
▽ More
Metamaterials are fascinating tools that can structure not only surface plasmons and electromagnetic waves but also electromagnetic vacuum fluctuations. The possibility of shaping the quantum vacuum is a powerful concept that ultimately allows engineering the interaction between macroscopic surfaces and quantum emitters such as atoms, molecules or quantum dots. The long-range atom-surface interaction, known as Casimir-Polder interaction, is of fundamental importance in quantum electrodynamics but also attracts a significant interest for platforms that interface atoms with nanophotonic devices. Here we perform a spectroscopic selective reflection measurement of the Casimir-Polder interaction between a Cs(6P_{3/2}) atom and a nanostructured metallic planar metamaterial. We show that by engineering the near-field plasmonic resonances of the metamaterial, we can successfully tune the Casimir-Polder interaction, demonstrating both a strong enhancement and reduction with respect to its non-resonant value. We also show an enhancement of the atomic spontaneous emission rate due to its coupling with the evanescent modes of the nanostructure. Probing excited state atoms next to nontrivial tailored surfaces is a rigorous test of quantum electrodynamics. Engineering Casimir-Polder interactions represents a significant step towards atom trapping in the extreme near field, possibly without the use of external fields.
△ Less
Submitted 22 February, 2018; v1 submitted 25 June, 2016;
originally announced June 2016.
-
Atomic Response in the Near-field of Nanostructured Plasmonic Metamaterial
Authors:
Syed Abdullah Aljunid,
Eng Aik Chan,
Giorgio Adamo,
Martial Ducloy,
David Wilkowski,
Nikolay I. Zheludev
Abstract:
We report on reflection spectra of caesium atoms in close vicinity of a nanostructured metallic meta-surface. We show that the hyperfine sub-Doppler spectrum of the $6S_{1/2} - 6P_{3/2}$ resonance transition at 852 nm is strongly affected by the coupling to the plasmonic resonance of the nanostructure. Fine tuning of dispersion and positions of the atomic lines in the near-field of plasmonic metam…
▽ More
We report on reflection spectra of caesium atoms in close vicinity of a nanostructured metallic meta-surface. We show that the hyperfine sub-Doppler spectrum of the $6S_{1/2} - 6P_{3/2}$ resonance transition at 852 nm is strongly affected by the coupling to the plasmonic resonance of the nanostructure. Fine tuning of dispersion and positions of the atomic lines in the near-field of plasmonic metamaterials could have uses and implications for the atom-based metrology, sensing and the development of atom-on-a-chip devices.
△ Less
Submitted 27 March, 2016;
originally announced March 2016.
-
Doppler-free approach to optical pumping dynamics in the $6S_{1/2}- 5D_{5/2}$ electric quadrupole transition of Cesium vapor
Authors:
Eng Aik Chan,
Syed Abdullah Aljunid,
Nikolay I. Zheludev,
David Wilkowski,
Martial Ducloy
Abstract:
The $6S_{1/2}-5D_{5/2}$ electric quadrupole transition is investigated in Cesium vapor at room temperature via nonlinear Doppler-free 6P-6S-5D three-level spectroscopy. Frequency-resolved studies of individual E2 hyperfine lines allow one to analyze optical pumping dynamics, polarization selection rules and line intensities. It opens the way to studies of transfer of light orbital angular momentum…
▽ More
The $6S_{1/2}-5D_{5/2}$ electric quadrupole transition is investigated in Cesium vapor at room temperature via nonlinear Doppler-free 6P-6S-5D three-level spectroscopy. Frequency-resolved studies of individual E2 hyperfine lines allow one to analyze optical pumping dynamics, polarization selection rules and line intensities. It opens the way to studies of transfer of light orbital angular momentum to atoms, and the influence of metamaterials on E2 line spectra.
△ Less
Submitted 24 May, 2016; v1 submitted 9 March, 2016;
originally announced March 2016.
-
How Market Structure Drives Commodity Prices
Authors:
Bin Li,
K. Y. Michael Wong,
Amos H. M. Chan,
Tsz Yan So,
Hermanni Heimonen,
Junyi Wei,
David Saad
Abstract:
We introduce an agent-based model, in which agents set their prices to maximize profit. At steady state the market self-organizes into three groups: excess producers, consumers and balanced agents, with prices determined by their own resource level and a couple of macroscopic parameters that emerge naturally from the analysis, akin to mean-field parameters in statistical mechanics. When resources…
▽ More
We introduce an agent-based model, in which agents set their prices to maximize profit. At steady state the market self-organizes into three groups: excess producers, consumers and balanced agents, with prices determined by their own resource level and a couple of macroscopic parameters that emerge naturally from the analysis, akin to mean-field parameters in statistical mechanics. When resources are scarce prices rise sharply below a turning point that marks the disappearance of excess producers. To compare the model with real empirical data, we study the relations between commodity prices and stock-to-use ratios of a range of commodities such as agricultural products and metals. By introducing an elasticity parameter to mitigate noise and long-term changes in commodities data, we confirm the trend of rising prices, provide evidence for turning points, and indicate yield points for less essential commodities.
△ Less
Submitted 2 January, 2018; v1 submitted 14 August, 2015;
originally announced August 2015.
-
Illusory Sense of Human Touch from a Warm and Soft Artificial Hand
Authors:
John-John Cabibihan,
Deepak Joshi,
Yeshwin Mysore Srinivasa,
Mark Aaron Chan,
Arrchana Muruganantham
Abstract:
To touch and be touched are vital to human development, well being, and relationships. However, to those who have lost their arms and hands due to accident or war, touching becomes a serious concern that often leads to psychosocial issues and social stigma. In this paper, we demonstrate that the touch from a warm and soft rubber hand can be perceived by another person as if the touch were coming f…
▽ More
To touch and be touched are vital to human development, well being, and relationships. However, to those who have lost their arms and hands due to accident or war, touching becomes a serious concern that often leads to psychosocial issues and social stigma. In this paper, we demonstrate that the touch from a warm and soft rubber hand can be perceived by another person as if the touch were coming from a human hand. We describe a three step process toward this goal. First, we made participants select artificial skin samples according to their preferred warmth and softness characteristics. At room temperature, the preferred warmth was found to be 28.4 deg C at the skin surface of a soft silicone rubber material that has a Shore durometer value of 30 at the OO scale. Second, we developed a process to create a rubber hand replica of a human hand. To compare the skin softness of a human hand and artificial hands, a robotic indenter was employed to produce a softness map by recording the displacement data when constant indentation force of 1 N was applied to 780 data points on the palmar side of the hand. Results showed that an artificial hand with skeletal structure is as soft as a human hand. Lastly, the participants arms were touched with human and artificial hands, but they were prevented to see the hand that touched them. Receiver operating characteristic curve analysis suggests that a warm and soft artificial hand can create an illusion that the touch is from a human hand. These findings open the possibilities for prosthetic and robotic hands that are lifelike and are more socially acceptable.
△ Less
Submitted 27 February, 2015;
originally announced February 2015.
-
Asymmetric-detection time-stretch optical microscopy (ATOM) for ultrafast high-contrast cellular imaging in flow
Authors:
Terence T. W. Wong,
Andy K. S. Lau,
Kenneth K. Y. Ho,
Matthew Y. H. Tang,
Joseph D. F. Robles,
Xiaoming Wei,
Antony C. S. Chan,
Anson H. L. Tang,
Edmund Y. Lam,
Kenneth K. Y. Wong,
Godfrey C. F. Chan,
Ho Cheung Shum,
Kevin K. Tsia
Abstract:
Accelerating imaging speed in optical microscopy is often realized at the expense of image contrast, image resolution, and detection sensitivity- a common predicament for advancing high-speed and high-throughput cellular imaging. We here demonstrate a new imaging approach, called asymmetric-detection time-stretch optical microscopy (ATOM), which can deliver ultrafast label-free high-contrast flow…
▽ More
Accelerating imaging speed in optical microscopy is often realized at the expense of image contrast, image resolution, and detection sensitivity- a common predicament for advancing high-speed and high-throughput cellular imaging. We here demonstrate a new imaging approach, called asymmetric-detection time-stretch optical microscopy (ATOM), which can deliver ultrafast label-free high-contrast flow imaging with well delineated cellular morphological resolution and in-line optical image amplification to overcome the compromised imaging sensitivity at high speed. We show that ATOM can separately reveal the enhanced phase-gradient and absorption contrast in microfluidic live-cell imaging at a flow speed as high as ~10 m/s, corresponding to an imaging throughput of ~100,000 cells/sec. ATOM could thus be the enabling platform to meet the pressing need for intercalating optical microscopy in cellular assay, e.g. imaging flow cytometry- permitting high-throughput access to the morphological information of the individual cells simultaneously with a multitude of parameters obtained in the standard assay.
△ Less
Submitted 22 September, 2013;
originally announced September 2013.
-
Hamiltonian Theory of Adiabatic Motion of Relativistic Charged Particles
Authors:
Xin Tao,
Anthony Chan,
Alain Brizard
Abstract:
A general Hamiltonian theory for the adiabatic motion of relativistic charged particles confined by slowly-varying background electromagnetic fields is presented based on a unified Lie-transform perturbation analysis in extended phase space (which includes energy and time as independent coordinates) for all three adiabatic invariants. First, the guiding-center equations of motion for a relativis…
▽ More
A general Hamiltonian theory for the adiabatic motion of relativistic charged particles confined by slowly-varying background electromagnetic fields is presented based on a unified Lie-transform perturbation analysis in extended phase space (which includes energy and time as independent coordinates) for all three adiabatic invariants. First, the guiding-center equations of motion for a relativistic particle are derived from the particle Lagrangian. Covariant aspects of the resulting relativistic guiding-center equations of motion are discussed and contrasted with previous works. Next, the second and third invariants for the bounce motion and drift motion, respectively, are obtained by successively removing the bounce phase and the drift phase from the guiding-center Lagrangian. First-order corrections to the second and third adiabatic invariants for a relativistic particle are derived. These results simplify and generalize previous works to all three adiabatic motions of relativistic magnetically-trapped particles.
△ Less
Submitted 31 July, 2007; v1 submitted 13 June, 2007;
originally announced June 2007.
-
Data processing model for the CDF experiment
Authors:
J. Antos,
M. Babik,
D. Benjamin,
S. Cabrera,
A. W. Chan,
Y. C. Chen,
M. Coca,
B. Cooper,
S. Farrington,
K. Genser,
K. Hatakeyama,
S. Hou,
T. L. Hsieh,
B. Jayatilaka,
S. Y. Jun,
A. V. Kotwal,
A. C. Kraan,
R. Lysak,
I. V. Mandrichenko,
P. Murat,
A. Robson,
P. Savard,
M. Siket,
B. Stelzer,
J. Syu
, et al. (5 additional authors not shown)
Abstract:
The data processing model for the CDF experiment is described. Data processing reconstructs events from parallel data streams taken with different combinations of physics event triggers and further splits the events into datasets of specialized physics datasets. The design of the processing control system faces strict requirements on bookkeeping records, which trace the status of data files and…
▽ More
The data processing model for the CDF experiment is described. Data processing reconstructs events from parallel data streams taken with different combinations of physics event triggers and further splits the events into datasets of specialized physics datasets. The design of the processing control system faces strict requirements on bookkeeping records, which trace the status of data files and event contents during processing and storage. The computing architecture was updated to meet the mass data flow of the Run II data collection, recently upgraded to a maximum rate of 40 MByte/sec. The data processing facility consists of a large cluster of Linux computers with data movement managed by the CDF data handling system to a multi-petaByte Enstore tape library. The latest processing cycle has achieved a stable speed of 35 MByte/sec (3 TByte/day). It can be readily scaled by increasing CPU and data-handling capacity as required.
△ Less
Submitted 9 June, 2006; v1 submitted 5 June, 2006;
originally announced June 2006.
-
Data production models for the CDF experiment
Authors:
J. Antos,
M. Babik,
D. Benjamin,
S. Cabrera,
A. W. Chan,
Y. C. Chen,
M. Coca,
B. Cooper,
K. Genser,
K. Hatakeyama,
S. Hou,
T. L. Hsieh,
B. Jayatilaka,
A. C. Kraan,
R. Lysak,
I. V. Mandrichenko,
A. Robson,
M. Siket,
B. Stelzer,
J. Syu,
P. K. Teng,
S. C. Timm,
T. Tomura,
E. Vataga,
S. A. Wolbers
, et al. (1 additional authors not shown)
Abstract:
The data production for the CDF experiment is conducted on a large Linux PC farm designed to meet the needs of data collection at a maximum rate of 40 MByte/sec. We present two data production models that exploits advances in computing and communication technology. The first production farm is a centralized system that has achieved a stable data processing rate of approximately 2 TByte per day.…
▽ More
The data production for the CDF experiment is conducted on a large Linux PC farm designed to meet the needs of data collection at a maximum rate of 40 MByte/sec. We present two data production models that exploits advances in computing and communication technology. The first production farm is a centralized system that has achieved a stable data processing rate of approximately 2 TByte per day. The recently upgraded farm is migrated to the SAM (Sequential Access to data via Metadata) data handling system. The software and hardware of the CDF production farms has been successful in providing large computing and data throughput capacity to the experiment.
△ Less
Submitted 5 June, 2006;
originally announced June 2006.
-
Relativistic Quasilinear Diffusion in Axisymmetric Magnetic Geometry for Arbitrary-Frequency Electromagnetic Fluctuations
Authors:
Alain J. Brizard,
Anthony A. Chan
Abstract:
A relativistic bounce-averaged quasilinear diffusion equation is derived to describe stochastic particle transport associated with arbitrary-frequency electromagnetic fluctuations in a nonuniform magnetized plasma. Expressions for the elements of a relativistic quasilinear diffusion tensor are calculated explicitly for magnetically-trapped particle distributions in axisymmetric magnetic geometry…
▽ More
A relativistic bounce-averaged quasilinear diffusion equation is derived to describe stochastic particle transport associated with arbitrary-frequency electromagnetic fluctuations in a nonuniform magnetized plasma. Expressions for the elements of a relativistic quasilinear diffusion tensor are calculated explicitly for magnetically-trapped particle distributions in axisymmetric magnetic geometry in terms of gyro-drift-bounce wave-particle resonances. The resonances can destroy any one of the three invariants of the unperturbed guiding-center Hamiltonian dynamics.
△ Less
Submitted 21 June, 2004; v1 submitted 22 March, 2004;
originally announced March 2004.
-
The GRID and the Linux Farm at the RCF
Authors:
A. Chan,
R. Hogue,
C. Hollowell,
O. Rind,
J. Smith,
T. Throwe,
T. Wlodek,
D. Yu
Abstract:
The emergence of the GRID architecture and related tools will have a large impact in the operation and design of present and future large clusters. We present here the ongoing efforts to equip the Linux Farm at the RHIC Computing Facility with Grid-like capabilities.
The emergence of the GRID architecture and related tools will have a large impact in the operation and design of present and future large clusters. We present here the ongoing efforts to equip the Linux Farm at the RHIC Computing Facility with Grid-like capabilities.
△ Less
Submitted 5 May, 2003; v1 submitted 1 May, 2003;
originally announced May 2003.
-
Software Scalability Issues in Large Clusters
Authors:
A. Chan,
R. Hogue,
C. Hollowell,
O. Rind,
T. Throwe,
T. Wlodek
Abstract:
The rapid development of large clusters built with commodity hardware has highlighted scalability issues with deploying and effectively running system software in large clusters. We describe here our experiences with monitoring, image distribution, batch and other system administration software tools within the 1000+ node Linux cluster currently in production at the RHIC Computing Facility.
The rapid development of large clusters built with commodity hardware has highlighted scalability issues with deploying and effectively running system software in large clusters. We describe here our experiences with monitoring, image distribution, batch and other system administration software tools within the 1000+ node Linux cluster currently in production at the RHIC Computing Facility.
△ Less
Submitted 5 May, 2003; v1 submitted 1 May, 2003;
originally announced May 2003.