Tunable kHz distributed feedback fiber laser enabled by glass additive-manufacturing
Authors:
Pawel Maniewski,
Alex I. Flint,
Rex H. S. Bannerman,
Timothy Lee,
Martynas Beresna
Abstract:
For short sections of fibers tailored to a specific application, fast laser-based manufacturing techniques can be an attractive alternative to the often-cumbersome traditional manufacturing routes. Short, high gain fibers can be used in e.g., distributed feedback fiber lasers (DFFL) that offer sought after performance suitable for a broad range of applications in modern photonics. DFFLs offer supe…
▽ More
For short sections of fibers tailored to a specific application, fast laser-based manufacturing techniques can be an attractive alternative to the often-cumbersome traditional manufacturing routes. Short, high gain fibers can be used in e.g., distributed feedback fiber lasers (DFFL) that offer sought after performance suitable for a broad range of applications in modern photonics. DFFLs offer superior stability and narrower linewidth compared to conventional fiber lasers. Tunable, narrow laser sources with output in eye-safe spectrum are desired for sensing, signal multiplexing, LIDAR systems etc. In this work we present DFFL obtained using Laser-Powder-Deposition made Er-doped silica fiber. Milliwatt level, ultra-narrow laser line (less than 4 kHz) was obtained using phase-shifted grating in 16 mm long fiber. The backward slope efficiency was as high as 24% when pumping at 976 nm. The results presented in this work showcase new possibilities in fiber fabrication that were unlocked through laser-assisted AM. This fiber laser sets the stage for the future of rapid fabrication of advanced fiber devices through unconventional manufacturing routes.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
Visible luminescence from hydrogenated amorphous silicon modified by femtosecond laser radiation
Authors:
Andrey V. Emelyanov,
Andrey G. Kazanskii,
Mark V. Khenkin,
Pavel A. Forsh,
Pavel K. Kashkarov,
Mindaugas Gecevicius,
Martynas Beresna,
Peter G. Kazansky
Abstract:
Visible luminescence is observed from the composite of SiO2 with embedded silicon nanocrystallites produced by femtosecond laser irradiation of hydrogenated amorphous silicon (a-Si:H) film in air. The photoluminescence originates from the defect states at the interface between silicon crystallites and SiO2 matrix. The method could be used for fabrication of luminescent layers to increase energy co…
▽ More
Visible luminescence is observed from the composite of SiO2 with embedded silicon nanocrystallites produced by femtosecond laser irradiation of hydrogenated amorphous silicon (a-Si:H) film in air. The photoluminescence originates from the defect states at the interface between silicon crystallites and SiO2 matrix. The method could be used for fabrication of luminescent layers to increase energy conversion of a-Si:H solar cells.
△ Less
Submitted 26 June, 2012;
originally announced June 2012.