-
Comparison between InAs-based and GaSb-based Interband cascade lasers with hybrid superlattice plasmon-enhanced claddings
Authors:
B. Petrović,
A. Bader,
J. Nauschütz,
T. Sato,
S. Birner,
S. Estevam,
R. Weih,
F. Hartmann,
S. Höfling
Abstract:
We compare InAs-based and GaSb-based interband cascade lasers (ICLs) with the same 12 stages active region designed to emit at a wavelength of 4.6 μm. They employ a hybrid cladding architecture with the same geometry and inner claddings consisting of InAs/AlSb superlattices but different outer claddings: The InAs-based ICL employs plasmon enhanced n-type doped InAs layers while the GaSb-based ICL…
▽ More
We compare InAs-based and GaSb-based interband cascade lasers (ICLs) with the same 12 stages active region designed to emit at a wavelength of 4.6 μm. They employ a hybrid cladding architecture with the same geometry and inner claddings consisting of InAs/AlSb superlattices but different outer claddings: The InAs-based ICL employs plasmon enhanced n-type doped InAs layers while the GaSb-based ICL employs plasmon-enhanced n-type doped InAs_0.915 Sb_0.085 claddings lattice matched to GaSb. Due to the lower refractive index of n+-InAsSb (n=2.88) compared to n+-InAs (n=3.10) and higher refractive index of separate confinement layers, the GaSb-based ICL shows a 3.8 % higher optical mode confinement in the active region compared to the InAs-based ICL. Experimentally, the GaSb-based ICL shows a 17.3 % lower threshold current density in pulsed operation at room temperature. Also presented is the influence of geometry and doping variation on confinement factors and calculated free carrier absorption losses in the GaSb-based ICL.
△ Less
Submitted 5 July, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
5.0 $μ$m emitting Interband Cascade Lasers with Superlattice and Bulk AlGaAsSb Claddings
Authors:
B. Petrović,
A. Bader,
J. Nauschütz,
T. Sato,
S. Birner,
R. Weih,
F. Hartmann,
S. Höfling
Abstract:
We present a comparison between interband cascade lasers (ICLs) with a 6-stage active region emitting at 5 $μ$m with AlSb/InAs superlattice claddings and with bulk Al_0.85 Ga_0.15 As_0.07 Sb_0.93 claddings. Utilizing bulk AlGaAsSb claddings with their lower refractive index compared to the more commonly used AlSb/InAs superlattice claddings, the mode-confinement in the active region increases by 1…
▽ More
We present a comparison between interband cascade lasers (ICLs) with a 6-stage active region emitting at 5 $μ$m with AlSb/InAs superlattice claddings and with bulk Al_0.85 Ga_0.15 As_0.07 Sb_0.93 claddings. Utilizing bulk AlGaAsSb claddings with their lower refractive index compared to the more commonly used AlSb/InAs superlattice claddings, the mode-confinement in the active region increases by 14.4% resulting in an improvement of the lasing threshold current density. For broad area laser and under pulsed excitation, the ICL with AlGaAsSb claddings shows a lower threshold current density of J_th=396 A/cm$^2$ compared to J_th=521 A/cm$^2$ for the reference ICL with superlattice claddings. Additionally, a higher characteristic temperature was obtained for the ICL with bulk claddings. A measured pulsed operation is observed up to 65 C.
△ Less
Submitted 11 June, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
GaSb-based Interband Cascade Laser with hybrid superlattice plasmon-enhanced claddings
Authors:
B. Petrović,
A. Bader,
J. Nauschütz,
T. Sato,
S. Birner,
R. Weih,
F. Hartmann,
S. Höfling
Abstract:
We present an interband cascade laser (ICL) emitting at 5.2 μm consisting of an 8-stage active region and a hybrid cladding composed of outer plasmon-enhanced InAs_0.915 Sb_0.085 and inner InAs/AlSb superlattice claddings. The hybrid cladding architecture shows an increase in mode-confinement in the active region by 11.2 % according to the simulation. This is a consequence of a significantly lower…
▽ More
We present an interband cascade laser (ICL) emitting at 5.2 μm consisting of an 8-stage active region and a hybrid cladding composed of outer plasmon-enhanced InAs_0.915 Sb_0.085 and inner InAs/AlSb superlattice claddings. The hybrid cladding architecture shows an increase in mode-confinement in the active region by 11.2 % according to the simulation. This is a consequence of a significantly lower refractive index of plasmon-enhanced claddings. The threshold current density is 242 A/cm^2 in pulsed operation at room temperature. This is the lowest value reported to date for ICLs emitting at wavelengths longer than 5 μm. We also report close to record value threshold power density of 840 W/cm^2 for ICLs at such wavelengths.
△ Less
Submitted 11 June, 2024; v1 submitted 30 January, 2024;
originally announced January 2024.
-
Exploration of Non-Resonant Divertor Features on the Compact Toroidal Hybrid
Authors:
K. A. Garcia,
A. Bader,
H. Frerichs,
G. J. Hartwell,
J. C. Schmitt,
N. Allen,
O. Schmitz
Abstract:
Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a complex scrape-off layer (SOL), created by chaotic magnetic topology in the plasma edge, connects the core plasma to the PFCs through varying magnetic flux tubes…
▽ More
Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a complex scrape-off layer (SOL), created by chaotic magnetic topology in the plasma edge, connects the core plasma to the PFCs through varying magnetic flux tubes. The Compact Toroidal Hybrid (CTH) serves as a test-bed to study this by scanning across its inductive current. Simulations observe a significant change of the chaotic edge structure and an effective distance between the confined plasma and the instrumented wall targets. The intersection pattern is observed to be a narrow helical band, which we claim is a resilient strike line pattern. However, signatures of finger-like structures, defined as heteroclinic tangles in chaotic domains, within the plasma edge connect the island chains to this resilient pattern. The dominant connection length field lines intersecting the targets are observed via heat flux modelling with EMC3-EIRENE. At low inductive current levels, the excursion of the field lines resembles a limited plasma wall scenario. At high currents, a private flux region is created in the area where the helical strike line pattern splits into two bands. These bands are divertor legs with distinct SOL parallel particle flow channels. The results demonstrate the NRD strike line pattern resiliency within CTH, but also show the underlying chaotic edge structure determining if the configuration is diverted or limited. This work supports future design efforts for a mechanical structure for the NRD.
△ Less
Submitted 24 August, 2023; v1 submitted 20 July, 2023;
originally announced July 2023.
-
Strain-free GaSb quantum dots as single-photon sources in the telecom S-band
Authors:
Johannes Michl,
Giora Peniakov,
Andreas Pfenning,
Joonas Hilska,
Abhiroop Chellu,
Andreas Bader,
Mircea Guina,
Sven Höfling,
Teemu Hakkarainen,
Tobias Huber-Loyola
Abstract:
Creating single photons in the telecommunication wavelength range from semiconductor quantum dots (QDs) and interfacing them with spins of electrons or holes has been of high interest in recent years, with research mainly focusing on indium based QDs. However, there is not much data on the optical and spin properties of galliumantimonide (GaSb) QDs, despite it being a physically rich system with a…
▽ More
Creating single photons in the telecommunication wavelength range from semiconductor quantum dots (QDs) and interfacing them with spins of electrons or holes has been of high interest in recent years, with research mainly focusing on indium based QDs. However, there is not much data on the optical and spin properties of galliumantimonide (GaSb) QDs, despite it being a physically rich system with an indirect to direct bandgap crossover in the telecom wavelength range. Here, we investigate the (quantum-) optical properties of GaSb quantum dots, which are fabricated by filling droplet-etched nanoholes in an aluminum-galliumantimonide (AlGaSb) matrix. We observe photoluminescence (PL) features from isolated and highly symmetric QDs that exhibit narrow linewidth in the telecom S-band and show an excitonic fine structure splitting of $ΔE=(12.0\pm0.5)μeV$. Moreover, we perform time-resolved measurements of the decay characteristics of an exciton and measure the second-order photon autocorrelation function of the charge complex to $g^{(2)}(0)=0.16\pm0.02$, revealing clear antibunching and thus proving the capability of this material platform to generate non-classical light.
△ Less
Submitted 7 May, 2023;
originally announced May 2023.
-
Energetic particle transport in optimized stellarators
Authors:
A Bader,
D T Anderson,
M Drevlak,
B J Faber,
C C Hegna,
S Henneberg,
M Landreman,
J C Schmitt,
Y Suzuki,
A Ware
Abstract:
Nine stellarator configurations, three quasiaxisymmetric, three quasihelically symmetric and three non-quasisymmetric are scaled to ARIES-CS size and analyzed for energetic particle content. The best performing configurations with regard to energetic particle confinement also perform the best on the neoclassical Γc metric, which attempts to align contours of the second adiabatic invariant with flu…
▽ More
Nine stellarator configurations, three quasiaxisymmetric, three quasihelically symmetric and three non-quasisymmetric are scaled to ARIES-CS size and analyzed for energetic particle content. The best performing configurations with regard to energetic particle confinement also perform the best on the neoclassical Γc metric, which attempts to align contours of the second adiabatic invariant with flux surfaces. Quasisymmetric configurations that simultaneously perform well on Γc and quasisymmetry have the best overall confinement, with collisional losses under 3%, approaching the performance of ITER with ferritic inserts.
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
A New Optimized Quasihelically SymmetricStellarator
Authors:
A. Bader,
B. J. Faber,
J. C. Schmitt,
D. T. Anderson,
M. Drevlak,
J. M. Duff,
H. Frerichs,
C. C. Hegna,
T. G. Kruger,
M. Landreman,
I. J. McKinney,
L. Singh,
J. M. Schroeder,
P. W. Terry,
A. S. Ware
Abstract:
A new optimized quasihelically symmetric configuration is described that has the desir-able properties of improved energetic particle confinement, reduced turbulent transportby 3D shaping, and non-resonant divertor capabilities. The configuration presented in thispaper is explicitly optimized for quasihelical symmetry, energetic particle confinement,neoclassical confinement, and stability near the…
▽ More
A new optimized quasihelically symmetric configuration is described that has the desir-able properties of improved energetic particle confinement, reduced turbulent transportby 3D shaping, and non-resonant divertor capabilities. The configuration presented in thispaper is explicitly optimized for quasihelical symmetry, energetic particle confinement,neoclassical confinement, and stability near the axis. Post optimization, the configurationwas evaluated for its performance with regard to energetic particle transport, idealmagnetohydrodynamic (MHD) stability at various values of plasma pressure, and iontemperature gradient instability induced turbulent transport. The effect of discrete coilson various confinement figures of merit, including energetic particle confinement, aredetermined by generating single-filament coils for the configuration. Preliminary divertoranalysis shows that coils can be created that do not interfere with expansion of thevessel volume near the regions of outgoing heat flux, thus demonstrating the possibilityof operating a non-resonant divertor.
△ Less
Submitted 23 April, 2020;
originally announced April 2020.
-
An adjoint method for gradient-based optimization of stellarator coil shapes
Authors:
E. J. Paul,
M. Landreman,
A. Bader,
W. Dorland
Abstract:
We present a method for stellarator coil design via gradient-based optimization of the coil-winding surface. The REGCOIL (Landreman 2017 Nucl. Fusion 57 046003) approach is used to obtain the coil shapes on the winding surface using a continuous current potential. We apply the adjoint method to calculate derivatives of the objective function, allowing for efficient computation of analytic gradient…
▽ More
We present a method for stellarator coil design via gradient-based optimization of the coil-winding surface. The REGCOIL (Landreman 2017 Nucl. Fusion 57 046003) approach is used to obtain the coil shapes on the winding surface using a continuous current potential. We apply the adjoint method to calculate derivatives of the objective function, allowing for efficient computation of analytic gradients while eliminating the numerical noise of approximate derivatives. We are able to improve engineering properties of the coils by targeting the root-mean-squared current density in the objective function. We obtain winding surfaces for W7-X and HSX which simultaneously decrease the normal magnetic field on the plasma surface and increase the surface-averaged distance between the coils and the plasma in comparison with the actual winding surfaces. The coils computed on the optimized surfaces feature a smaller toroidal extent and curvature and increased inter-coil spacing. A technique for visualization of the sensitivity of figures of merit to normal surface displacement of the winding surface is presented, with potential applications for understanding engineering tolerances.
△ Less
Submitted 12 January, 2018;
originally announced January 2018.
-
Evolving understanding of Antarctic ice-sheet physics and ambiguity in probabilistic sea-level projections
Authors:
Robert E. Kopp,
Robert M. DeConto,
Daniel A. Bader,
Carling C. Hay,
Radley M. Horton,
Scott Kulp,
Michael Oppenheimer,
David Pollard,
Benjamin H. Strauss
Abstract:
Mechanisms such as ice-shelf hydrofracturing and ice-cliff collapse may rapidly increase discharge from marine-based ice sheets. Here, we link a probabilistic framework for sea-level projections to a small ensemble of Antarctic ice-sheet (AIS) simulations incorporating these physical processes to explore their influence on global-mean sea-level (GMSL) and relative sea-level (RSL). We compare the n…
▽ More
Mechanisms such as ice-shelf hydrofracturing and ice-cliff collapse may rapidly increase discharge from marine-based ice sheets. Here, we link a probabilistic framework for sea-level projections to a small ensemble of Antarctic ice-sheet (AIS) simulations incorporating these physical processes to explore their influence on global-mean sea-level (GMSL) and relative sea-level (RSL). We compare the new projections to past results using expert assessment and structured expert elicitation about AIS changes. Under high greenhouse gas emissions (Representative Concentration Pathway [RCP] 8.5), median projected 21st century GMSL rise increases from 79 to 146 cm. Without protective measures, revised median RSL projections would by 2100 submerge land currently home to 153 million people, an increase of 44 million. The use of a physical model, rather than simple parameterizations assuming constant acceleration of ice loss, increases forcing sensitivity: overlap between the central 90% of simulations for 2100 for RCP 8.5 (93-243 cm) and RCP 2.6 (26-98 cm) is minimal. By 2300, the gap between median GMSL estimates for RCP 8.5 and RCP 2.6 reaches >10 m, with median RSL projections for RCP 8.5 jeopardizing land now occupied by 950 million people (vs. 167 million for RCP 2.6). The minimal correlation between the contribution of AIS to GMSL by 2050 and that in 2100 and beyond implies current sea-level observations cannot exclude future extreme outcomes. The sensitivity of post-2050 projections to deeply uncertain physics highlights the need for robust decision and adaptive management frameworks.
△ Less
Submitted 4 November, 2017; v1 submitted 18 April, 2017;
originally announced April 2017.
