-
Surface-Functionalization of Oleate-Capped Nano-Emitters for Stable Dispersion in 3D-Printable Polymers
Authors:
Akhilesh Kumar Pathak,
Sachin Prashant Kulkarni,
Rachel R. Chan,
Chad A. Mirkin,
Koray Aydin,
Sridhar Krishnaswamy
Abstract:
Two-photon polymerization (2PP) 3D printing is a well-known technique for fabricating passive micro/nanoscale structures, such as microlenses and inversely designed polarization splitters. The integration of light emitting nanoparticle (NP) dopants, such as quantum dots (QDs) and rare-earth doped nanoparticles (RENPs), into a polymer resist would enable 3D printing of active polymer micro-photonic…
▽ More
Two-photon polymerization (2PP) 3D printing is a well-known technique for fabricating passive micro/nanoscale structures, such as microlenses and inversely designed polarization splitters. The integration of light emitting nanoparticle (NP) dopants, such as quantum dots (QDs) and rare-earth doped nanoparticles (RENPs), into a polymer resist would enable 3D printing of active polymer micro-photonic devices, including sensors, lasers, and solid-state displays. Many NPs are stabilized with oleic acid ligands to prevent degradation, but oleate-capped NPs (oc-NPs) tend to agglomerate in nonpolar media despite the hydrophobicity of the ligand. This results in an uneven distribution of NPs in polymers and increased optical extinction properties. In this work, we propose a general approach for dispersing various oc-NPs in commercial 3D printable polymers. We achieve controlled growth of small carbon chains around the oc-NPs by functionalizing the NPs with methyl-methacrylate monomers. The proposed approach is validated on RENPs (~65 nm) and CdSe/ZnS quantum dots (~12 nm) using different commercial polymer resists (IP-Dip and IP-Visio). Dispersions of functionalized NPs (f-NPs) have improved NP density by an order of magnitude and are shown to be stable for several weeks with minimal impact on printing quality. Our approach is generalizable to a variety of oc-NPs and ultimately leads to higher quality polymer-based optical and electronic devices.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Large-area polycrystalline $α$-MoO3 thin films for IR photonics
Authors:
Maria Cristina Larciprete,
Daniele Ceneda,
Chiyu Yang,
Sina Abedini Dereshgi,
Federico Vittorio Lupo,
Maria Pia Casaletto,
Roberto Macaluso,
Mauro Antezza,
Zhuomin M. Zhang,
Marco Centini,
Koray Aydin
Abstract:
In recent years, excitation of surface phonon polaritons (SPhPs) in van der Waals materials received wide attention from the nanophotonics community. Alpha-phase Molybdenum trioxide ($α$-MoO3), a naturally occurring biaxial hyperbolic crystal, emerged as a promising polaritonic material due to its ability to support SPhPs for three orthogonal directions at different wavelength bands (range 10-20…
▽ More
In recent years, excitation of surface phonon polaritons (SPhPs) in van der Waals materials received wide attention from the nanophotonics community. Alpha-phase Molybdenum trioxide ($α$-MoO3), a naturally occurring biaxial hyperbolic crystal, emerged as a promising polaritonic material due to its ability to support SPhPs for three orthogonal directions at different wavelength bands (range 10-20 $μ$m). Here, we report on the fabrication and IR characterization of large-area (over 1 cm$^2$ size) $α$-MoO3 polycrystalline films deposited on fused silica substrates by pulsed laser deposition. Single alpha-phase MoO3 films exhibiting a polarization-dependent reflection peak at 1006 cm$^{-1}$ with a resonance Q-factor as high as 53 were achieved. Reflection can be tuned via changing incident polarization with a dynamic range of $Δ$R=0.3 at 45 deg. incidence angle. We also report a polarization-independent almost perfect absorption condition (R<0.01) at 972 cm$^{-1}$ which is preserved for a broad angle of incidence. The development of a low-cost polaritonic platform with high-Q resonances in the mid-infrared (mid-IR) range is crucial for a wide number of functionalities including sensors, filters, thermal emitters, and label-free biochemical sensing devices. In this framework our findings appear extremely promising for the further development of lithography-free, scalable films, for efficient and large-scale devices operating in the free space, using far-field detection setups.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Lithography-free IR polarization converters via orthogonal in-plane phonons in a-MoO3 flakes
Authors:
Sina Abedini Dereshgi,
Thomas G. Folland,
Akshay A. Murthy,
Xianglian Song,
Ibrahim Tanriover,
Vinayak P. Dravid,
Joshua D. Caldwell,
Koray Aydin
Abstract:
Exploiting polaritons in natural vdW materials has been successful in achieving extreme light confinement and low-loss optical devices and enabling simplified device integration. Recently, a-MoO3 has been reported as a semiconducting biaxial vdW material capable of sustaining naturally orthogonal in-plane phonon polariton modes in IR. In this study, we investigate the polarization-dependent optica…
▽ More
Exploiting polaritons in natural vdW materials has been successful in achieving extreme light confinement and low-loss optical devices and enabling simplified device integration. Recently, a-MoO3 has been reported as a semiconducting biaxial vdW material capable of sustaining naturally orthogonal in-plane phonon polariton modes in IR. In this study, we investigate the polarization-dependent optical characteristics of cavities formed using a-MoO3 to extend the degrees of freedom in the design of IR photonic components exploiting the in-plane anisotropy of this material. Polarization-dependent absorption over 80% in a multilayer Fabry-Perot structure with a-MoO3 is reported without the need for nanoscale fabrication on the a-MoO3. We observe coupling between the a-MoO3 optical phonons and the Fabry-Perot cavity resonances. Using cross-polarized reflectance spectroscopy we show that the strong birefringence results in 15% of the total power converted into the orthogonal polarization with respect to incident wave. These findings can open new avenues in the quest for polarization filters and low-loss, integrated planar IR photonics and in dictating polarization control.
△ Less
Submitted 16 October, 2020; v1 submitted 18 June, 2020;
originally announced June 2020.
-
A Physics Based Approach for Neural Networks Enabled Design of All-Dielectric Metasurfaces
Authors:
Ibrahim Tanriover,
Wisnu Hadibrata,
Koray Aydin
Abstract:
Machine learning methods have found novel application areas in various disciplines as they offer low-computational cost solutions to complex problems. Recently, metasurface design has joined among these applications, and neural networks enabled significant improvements within a short period of time. However, there are still outstanding challenges that needs to be overcome. Here, we propose a data…
▽ More
Machine learning methods have found novel application areas in various disciplines as they offer low-computational cost solutions to complex problems. Recently, metasurface design has joined among these applications, and neural networks enabled significant improvements within a short period of time. However, there are still outstanding challenges that needs to be overcome. Here, we propose a data pre-processing approach based on the governing laws of the physical problem to eliminate dimensional mismatch between high dimensional optical response and low dimensional feature space of metasurfaces. We train forward and inverse models to predict optical responses of cylindrical meta-atoms and to retrieve their geometric parameters for a desired optical response, respectively. Our approach provides accurate prediction capability even outside the training spectral range. Finally, using our inverse model, we design and demonstrate a focusing metalens as a proof-of-concept application, thus validating the capability of our proposed approach. We believe our method will pave the way towards practical learning-based models to solve more complicated photonic design problems.
△ Less
Submitted 18 June, 2020; v1 submitted 23 April, 2020;
originally announced April 2020.
-
Inverse-Designed Stretchable Metalens with Tunable Focal Distance
Authors:
Francois Callewaert,
Vesselin Velev,
Shizhou Jiang,
Alan Varteres Sahakian,
Prem Kumar,
Koray Aydin
Abstract:
In this paper we present an inverse-designed 3D-printed all-dielectric stretchable millimeter wave metalens with a tunable focal distance. Computational inverse-design method is used to design a flat metalens made of disconnected building polymer blocks with complex shapes, as opposed to conventional monolithic lenses. Proposed metalens provides better performance than a conventional Fresnel lens,…
▽ More
In this paper we present an inverse-designed 3D-printed all-dielectric stretchable millimeter wave metalens with a tunable focal distance. Computational inverse-design method is used to design a flat metalens made of disconnected building polymer blocks with complex shapes, as opposed to conventional monolithic lenses. Proposed metalens provides better performance than a conventional Fresnel lens, using lesser amount of material and enabling larger focal distance tunability. The metalens is fabricated using a commercial 3D-printer and attached to a stretchable platform. Measurements and simulations show that focal distance can be tuned by a factor of 4 with a stretching factor of only 75%, a nearly diffraction-limited focal spot, and with a 70% focusing efficiency. The proposed platform can be extended for design and fabrication of multiple electromagnetic devices working from visible to microwave radiation depending on scaling of the devices.
△ Less
Submitted 4 December, 2017;
originally announced December 2017.
-
Inverse designed broadband all-dielectric electromagnetic metadevices
Authors:
Francois Callewaert,
Vesselin Velev,
Alan V. Sahakian,
Prem Kumar,
Koray Aydin
Abstract:
We present an all-dielectric metadevice platform realized by combining an inverse electromagnetic design computational method with additive manufacturing. As opposed to conventional flat metasurface based devices that are composed of resonant building blocks resulting in narrow band operation, our design approach creates non-resonant, extremely broadband metadevices. We propose and demonstrate hig…
▽ More
We present an all-dielectric metadevice platform realized by combining an inverse electromagnetic design computational method with additive manufacturing. As opposed to conventional flat metasurface based devices that are composed of resonant building blocks resulting in narrow band operation, our design approach creates non-resonant, extremely broadband metadevices. We propose and demonstrate high-efficiency (transmission > 60%), using thin all-dielectric metadevices that are capable of polarization splitting, beam bending, and focusing. Experimental demonstrations are performed at millimeter-wave frequencies using 3D-printed metadevices, however our proposed platform can be readily applied to the design and fabrication of electromagnetic and photonic metadevices spanning microwave to optical frequencies.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Dynamically controlled plasmonic nano-antenna phased array utilizing vanadium dioxide
Authors:
Gregory Kaplan,
Koray Aydin,
Jacob Scheuer
Abstract:
We propose and analyze theoretically an approach for realizing a tunable optical phased-array antenna utilizing the properties of VO2 for electronic beam steering applications in the near-IR spectral range. The device is based on a 1D array of slot nano-antennas engraved in a thin Au film grown over VO2 layer. The tuning is obtained by inducing a temperature gradient over the device, which changes…
▽ More
We propose and analyze theoretically an approach for realizing a tunable optical phased-array antenna utilizing the properties of VO2 for electronic beam steering applications in the near-IR spectral range. The device is based on a 1D array of slot nano-antennas engraved in a thin Au film grown over VO2 layer. The tuning is obtained by inducing a temperature gradient over the device, which changes the refractive index of the VO2, and hence modifies the phase response of the elements comprising the array, by producing a thermal gradient within the underlying PCM layer. Using a 10-element array, we show that an incident beam can be steered up to with respect to the normal, by applying a gradient of less than 10°C.
△ Less
Submitted 8 February, 2017;
originally announced February 2017.
-
Omnidirectional and broadband absorption enhancement from trapezoidal Mie resonators in semiconductor metasurfaces
Authors:
Ragip A. Pala,
Serkan Butun,
Koray Aydin,
Harry A. Atwater
Abstract:
Light trapping in planar ultrathin-film solar cells is limited due to a small number of optical modes available in the thin-film slab. A nanostructured thin-film design could surpass this limit by providing broadband increase in the local density of states in a subwavelength volume and maintaining efficient coupling of light. Here we report a broadband metasurface design, enabling efficient and br…
▽ More
Light trapping in planar ultrathin-film solar cells is limited due to a small number of optical modes available in the thin-film slab. A nanostructured thin-film design could surpass this limit by providing broadband increase in the local density of states in a subwavelength volume and maintaining efficient coupling of light. Here we report a broadband metasurface design, enabling efficient and broadband absorption enhancement by direct coupling of incoming light to resonant modes of subwavelength-scale Mie nanoresonators defined in the thin-film active layer. Absorption was investigated both theoretically and experimentally in prototypes consisting of lithographically patterned, two-dimensional periodic arrays of silicon nanoresonators on silica substrates. A crossed trapezoid resonator shape of rectangular cross section is used to excite broadband Mie resonances across the visible and near-IR spectra. Our numerical simulations, optical absorption measurements and photocurrent spectral response measurements demonstrate that crossed trapezoidal Mie resonant structures enable angle-insensitive, broadband absorption. A short circuit current density of 12.0 mA/cm2 is achieved in 210 nm thick patterned Si films, yielding a 4-fold increase compared to planar films of the same thickness. It is suggested that silicon metasurfaces with Mie resonator arrays can provide useful insights to guide future ultrathin-film solar cell designs incorporating nanostructured thin active layers.
△ Less
Submitted 15 December, 2015; v1 submitted 14 December, 2015;
originally announced December 2015.
-
Visible-frequency metasurfaces for broadband anomalous reflection and high-efficiency spectrum splitting
Authors:
Zhongyang Li,
Edgar Palacios,
Serkan Butun,
Koray Aydin
Abstract:
Ultrathin metasurfaces have recently emerged as promising materials to enable novel, flat optical components and surface-confined, miniature photonic devices. However, experimental realization of high-performance metasurfaces at visible frequencies has been a significant challenge due to high plasmonic losses and difficulties in high-uniformity nanofabrication. Here, we propose a highly-efficient…
▽ More
Ultrathin metasurfaces have recently emerged as promising materials to enable novel, flat optical components and surface-confined, miniature photonic devices. However, experimental realization of high-performance metasurfaces at visible frequencies has been a significant challenge due to high plasmonic losses and difficulties in high-uniformity nanofabrication. Here, we propose a highly-efficient yet simple metasurface design comprising of single gradient antenna as unit cell. We demonstrate visible broadband (450 - 850 nm) anomalous reflection and spectrum splitting with 85% conversion efficiency. Average power ratio of anomalous reflection to the strongest diffraction was calculated to be ~ 103 and measured to be ~ 10. The anomalous reflected photons and spectrum splitting performance have been visualized using CCD and characterized using angle-resolved measurement setup. Metasurface design proposed here is a clear departure from conventional metasurfaces utilizing multiple, anisotropic resonators, and could enable high-efficiency, broadband metasurfaces for achieving directional emitters, polarization/spectrum splitting surfaces for spectroscopy and photovoltaics.
△ Less
Submitted 28 October, 2014;
originally announced October 2014.
-
Large-area, Lithography-Free Super Absorbers and Color Filters at Visible Frequencies Using Ultrathin Metallic Films
Authors:
Zhongyang Li,
Serkan Butun,
Koray Aydin
Abstract:
Plasmonic materials and metamaterials have been widely utilized to achieve spectral transmission, reflection and absorption filters based on localized or delocalized resonances arising from the interaction of photons with nanostructured materials. Realization of visible-frequency, high-performance, large-area, optical filters based on nanoplasmonic materials is rather challenging due to nanofabric…
▽ More
Plasmonic materials and metamaterials have been widely utilized to achieve spectral transmission, reflection and absorption filters based on localized or delocalized resonances arising from the interaction of photons with nanostructured materials. Realization of visible-frequency, high-performance, large-area, optical filters based on nanoplasmonic materials is rather challenging due to nanofabrication related problems (cost, fabrication imperfection, surface roughness) and optical losses of metals. Here, we propose and demonstrate large-area perfect absorbers and transmission filters that overcome difficulties associated with the nanofabrication using a lithography-free approach. We also utilize and benefit from the optical losses in metals in our optical filter designs. Our resonant optical filter design is based on a modified, asymmetric metal-insulator-metal (MIM) based Fabry-Perot cavity with plasmonic, lossy ultra-thin (~30 nm) metallic films used as the top metallic layer. We demonstrated a narrow bandwidth (~17 nm) super absorber with 97% maximum absorption with a performance comparable to nanostructure/nanoparticle-based super absorbers. We also investigated transmission (color) filters using ultra-thin metallic films, in which different colors can be obtained by controlling the dielectric spacer thickness. With performance parameters of transmission peak intensity reaching 60% and a narrow-band of ~ 40 nm, our color filters exceed the performance of widely studied plasmonic nanohole array based color filters. Proposed asymmetric Fabry-Perot cavities using ultra-thin metallic films could find applications in spectrally selective optical (color and absorber) filters, optoelectronic devices with controlled bandwidth such as narrow-band photodetectors, and light-emitting devices.
△ Less
Submitted 28 October, 2014;
originally announced October 2014.
-
Split ring resonator-coupled enhanced transmission through a single subwavelength aperture
Authors:
Koray Aydin,
A. Ozgur Cakmak,
Levent Sahin,
Z. Li,
Filiberto Bilotti,
Lucio Vegni,
Ekmel Ozbay
Abstract:
We report the enhanced transmission of electromagnetic waves through a single subwavelength aperture by making use of the resonance behavior of a split ring resonator (SRR) at microwave frequencies. By placing a single SRR at the near-field of the aperture, strongly localized electromagnetic fields are effectively coupled to the aperture with a radius that is twenty times smaller than the resona…
▽ More
We report the enhanced transmission of electromagnetic waves through a single subwavelength aperture by making use of the resonance behavior of a split ring resonator (SRR) at microwave frequencies. By placing a single SRR at the near-field of the aperture, strongly localized electromagnetic fields are effectively coupled to the aperture with a radius that is twenty times smaller than the resonance wavelength. We obtained 740-fold transmission enhancement by exciting the electric resonance of SRR. A different coupling mechanism, through the magnetic resonance of SRR, is also verified to yield enhanced transmission. Good agreement is obtained between the microwave measurements and numerical simulations.
△ Less
Submitted 26 May, 2008;
originally announced May 2008.
