Showing 1–50 of 172 results for author: Pan, C

A Framework of FAS-RIS Systems: Performance Analysis and Throughput Optimization

Authors: Junteng Yao, Xiazhi Lai, Kangda Zhi, Tuo Wu, Ming Jin, Cunhua Pan, Maged Elkashlan, Chau Yuen, Kai-Kit Wong

Abstract: In this paper, we investigate reconfigurable intelligent surface (RIS)-assisted communication systems which involve a fixed-antenna base station (BS) and a mobile user (MU) that is equipped with fluid antenna system (FAS). Specifically, the RIS is utilized to enable communication for the user whose direct link from the base station is blocked by obstacles. We propose a comprehensive framework that… ▽ More In this paper, we investigate reconfigurable intelligent surface (RIS)-assisted communication systems which involve a fixed-antenna base station (BS) and a mobile user (MU) that is equipped with fluid antenna system (FAS). Specifically, the RIS is utilized to enable communication for the user whose direct link from the base station is blocked by obstacles. We propose a comprehensive framework that provides transmission design for both static scenarios with the knowledge of channel state information (CSI) and harsh environments where CSI is hard to acquire. It leads to two approaches: a CSI-based scheme where CSI is available, and a CSI-free scheme when CSI is inaccessible. Given the complex spatial correlations in FAS, we employ block-diagonal matrix approximation and independent antenna equivalent models to simplify the derivation of outage probabilities in both cases. Based on the derived outage probabilities, we then optimize the throughput of the FAS-RIS system. For the CSI-based scheme, we first propose a gradient ascent-based algorithm to obtain a near-optimal solution. Then, to address the possible high computational complexity in the gradient algorithm, we approximate the objective function and confirm a unique optimal solution accessible through a bisection search method. For the CSI-free scheme, we apply the partial gradient ascent algorithm, reducing complexity further than full gradient algorithms. We also approximate the objective function and derive a locally optimal closed-form solution to maximize throughput. Simulation results validate the effectiveness of the proposed framework for the transmission design in FAS-RIS systems. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: submitted to IEEE journal for possible publication

Movable Antenna-enabled RIS-aided Integrated Sensing and Communication

Authors: Haisu Wu, Hong Ren, Cunhua Pan

Abstract: In this paper, we investigate a movable antenna (MA)-aided integrated sensing and communication (ISAC) system, where a reconfigurable intelligent surface (RIS) is employed to enhance wireless communication and sensing performance in dead zones. Specifically, this paper aims to maximize the minimum beampattern gain at the RIS by jointly optimizing beamforming matrix at the base station (BS), the re… ▽ More In this paper, we investigate a movable antenna (MA)-aided integrated sensing and communication (ISAC) system, where a reconfigurable intelligent surface (RIS) is employed to enhance wireless communication and sensing performance in dead zones. Specifically, this paper aims to maximize the minimum beampattern gain at the RIS by jointly optimizing beamforming matrix at the base station (BS), the reflecting coefficients at the RIS and the positions of the MAs, subject to signal-to-interference-plus-noise ratio (SINR) constraint for the users and maximum transmit power at the BS. To tackle this non-convex optimization problem, we propose an alternating optimization (AO) algorithm and employ semidefinite relaxation (SDR), sequential rank-one constraint relaxation (SRCR) and successive convex approximation (SCA) techniques. Numerical results indicate that the MA and RIS-aided ISAC system outperforms conventional fixed position antenna (FPA) and RIS-aided systems. In addition, the application of MAs can reduce the similarity of user channels and enhance channel gain in the ISAC system. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 14 pages, 11 figures

Model-Based Diffusion for Trajectory Optimization

Authors: Chaoyi Pan, Zeji Yi, Guanya Shi, Guannan Qu

Abstract: Recent advances in diffusion models have demonstrated their strong capabilities in generating high-fidelity samples from complex distributions through an iterative refinement process. Despite the empirical success of diffusion models in motion planning and control, the model-free nature of these methods does not leverage readily available model information and limits their generalization to new sc… ▽ More Recent advances in diffusion models have demonstrated their strong capabilities in generating high-fidelity samples from complex distributions through an iterative refinement process. Despite the empirical success of diffusion models in motion planning and control, the model-free nature of these methods does not leverage readily available model information and limits their generalization to new scenarios beyond the training data (e.g., new robots with different dynamics). In this work, we introduce Model-Based Diffusion (MBD), an optimization approach using the diffusion process to solve trajectory optimization (TO) problems without data. The key idea is to explicitly compute the score function by leveraging the model information in TO problems, which is why we refer to our approach as model-based diffusion. Moreover, although MBD does not require external data, it can be naturally integrated with data of diverse qualities to steer the diffusion process. We also reveal that MBD has interesting connections to sampling-based optimization. Empirical evaluations show that MBD outperforms state-of-the-art reinforcement learning and sampling-based TO methods in challenging contact-rich tasks. Additionally, MBD's ability to integrate with data enhances its versatility and practical applicability, even with imperfect and infeasible data (e.g., partial-state demonstrations for high-dimensional humanoids), beyond the scope of standard diffusion models. △ Less

Submitted 28 May, 2024; originally announced July 2024.

Comments: Website: https://lecar-lab.github.io/mbd/

Module control of network analysis in psychopathology

Authors: Chunyu Pan, Quan Zhang, Yue Zhu, Shengzhou Kong, Juan Liu, Changsheng Zhang, Fei Wang, Xizhe Zhang

Abstract: The network approach to characterizing psychopathology departs from traditional latent categorical and dimensional approaches. Causal interplay among symptoms contributed to dynamic psychopathology system. Therefore, analyzing the symptom clusters is critical for understanding mental disorders. Furthermore, despite extensive research studying the topological features of symptom networks, the contr… ▽ More The network approach to characterizing psychopathology departs from traditional latent categorical and dimensional approaches. Causal interplay among symptoms contributed to dynamic psychopathology system. Therefore, analyzing the symptom clusters is critical for understanding mental disorders. Furthermore, despite extensive research studying the topological features of symptom networks, the control relationships between symptoms remain largely unclear. Here, we present a novel systematizing concept, module control, to analyze the control principle of the symptom network at a module level. We introduce Module Control Network (MCN) to identify key modules that regulate the network's behavior. By applying our approach to a multivariate psychological dataset, we discover that non-emotional modules, such as sleep-related and stress-related modules, are the primary controlling modules in the symptom network. Our findings indicate that module control can expose central symptom cluster governing psychopathology network, offering novel insights into the underlying mechanisms of mental disorders and individualized approach to psychological interventions. △ Less

Submitted 30 May, 2024; originally announced July 2024.

Near-Field Mobile Tracking: A Framework of Using XL-RIS Information

Authors: Tuo Wu, Cunhua Pan, Kangda Zhi, Hong Ren, Maged Elkashlan, Chau Yuen

Abstract: This paper introduces a novel mobile tracking framework leveraging the high-dimensional signal received from extremely large-scale (XL) reconfigurable intelligent surfaces (RIS). This received signal, named XL-RIS information, has a much larger data dimension and therefore offers a richer feature set compared to the traditional base station (BS) received signal, i.e., BS information, enabling more… ▽ More This paper introduces a novel mobile tracking framework leveraging the high-dimensional signal received from extremely large-scale (XL) reconfigurable intelligent surfaces (RIS). This received signal, named XL-RIS information, has a much larger data dimension and therefore offers a richer feature set compared to the traditional base station (BS) received signal, i.e., BS information, enabling more accurate tracking of mobile users (MUs). As the first step, we present an XL-RIS information reconstruction (XL-RIS-IR) algorithm to reconstruct the high-dimensional XL-RIS information from the low-dimensional BS information. Building on this, this paper proposes a comprehensive framework for mobile tracking, consisting of a Feature Extraction Module and a Mobile Tracking Module. The Feature Extraction Module incorporates a convolutional neural network (CNN) extractor for spatial features, a time and frequency (T$\&$F) extractor for domain features, and a near-field angles of arrival (AoAs) extractor for capturing AoA features within the XL-RIS. These features are combined into a comprehensive feature vector, forming a time-varying sequence fed into the Mobile Tracking Module, which employs an Auto-encoder (AE) with a stacked bidirectional long short-term memory (Bi-LSTM) encoder and a standard LSTM decoder to predict MUs' positions in the upcoming time slot. Simulation results confirm that the tracking accuracy of our proposed framework is significantly enhanced by using reconstructed XL-RIS information and exhibits substantial robustness to signal-to-noise ratio (SNR) variations. △ Less

Submitted 3 April, 2024; originally announced June 2024.

Machine learning-based Near-field Emitter Localization via Grouped Hybrid Analog and Digital Massive MIMO Receive Array

Authors: Yifan Li, Feng Shu, Jiatong Bai, Cunhua Pan, Yongpeng Wu, Yaoliang Song, Jiangzhou Wang

Abstract: A fully-digital massive MIMO receive array is promising to meet the high-resolution requirement of near-field (NF) emitter localization, but it also results in the significantly increasing of hardware costs and algorithm complexity. In order to meet the future demand for green communication while maintaining high performance, the grouped hybrid analog and digital (HAD) structure is proposed for NF… ▽ More A fully-digital massive MIMO receive array is promising to meet the high-resolution requirement of near-field (NF) emitter localization, but it also results in the significantly increasing of hardware costs and algorithm complexity. In order to meet the future demand for green communication while maintaining high performance, the grouped hybrid analog and digital (HAD) structure is proposed for NF DOA estimation, which divides the large-scale receive array into small-scale groups and each group contains several subarrays. Thus the NF direction-of-arrival (DOA) estimation problem is viewed as far-field (FF) within each group, and some existing methods such as MUSIC, Root-MUSIC, ESPRIT, etc., can be adopted. Then by angle calibration, a candidate position set is generated. To eliminate the phase ambiguity arising from the HAD structure and obtain the emitter position, two low-complexity clustering-based methods, minimum sample distance clustering (MSDC) and range scatter diagram (RSD) - angle scatter diagram (ASD)-based DBSCAN (RSD-ASD-DBSCAN), are proposed based on the distribution features of samples in the candidate position set. Then to further improve the localization accuracy, a model-driven regression network (RegNet) is designed, which consists of a multi-layer neural network (MLNN) for false solution elimination and a perceptron for angle fusion. Finally, the Cramer-Rao lower bound (CRLB) of NF emitter localization for the proposed grouped HAD structure is also derived. The simulation results show that the proposed methods can achieve CRLB at different SNR regions, the RegNet has great performance advantages at low SNR regions and the clustering-based methods have much lower complexity. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Synchronization Scheme based on Pilot Sharing in Cell-Free Massive MIMO Systems

Authors: Qihao Peng, Hong Ren, Zhendong Peng, Cunhua Pan, Maged Elkashlan, Dongming Wang, Jiangzhou Wang, Xiaohu You

Abstract: This paper analyzes the impact of pilot-sharing scheme on synchronization performance in a scenario where several slave access points (APs) with uncertain carrier frequency offsets (CFOs) and timing offsets (TOs) share a common pilot sequence. First, the Cramer-Rao bound (CRB) with pilot contamination is derived for pilot-pairing estimation. Furthermore, a maximum likelihood algorithm is presented… ▽ More This paper analyzes the impact of pilot-sharing scheme on synchronization performance in a scenario where several slave access points (APs) with uncertain carrier frequency offsets (CFOs) and timing offsets (TOs) share a common pilot sequence. First, the Cramer-Rao bound (CRB) with pilot contamination is derived for pilot-pairing estimation. Furthermore, a maximum likelihood algorithm is presented to estimate the CFO and TO among the pairing APs. Then, to minimize the sum of CRBs, we devise a synchronization strategy based on a pilot-sharing scheme by jointly optimizing the cluster classification, synchronization overhead, and pilot-sharing scheme, while simultaneously considering the overhead and each AP's synchronization requirements. To solve this NP-hard problem, we simplify it into two sub-problems, namely cluster classification problem and the pilot sharing problem. To strike a balance between synchronization performance and overhead, we first classify the clusters by using the K-means algorithm, and propose a criteria to find a good set of master APs. Then, the pilot-sharing scheme is obtained by using the swap-matching operations. Simulation results validate the accuracy of our derivations and demonstrate the effectiveness of the proposed scheme over the benchmark schemes. △ Less

Submitted 30 May, 2024; v1 submitted 29 May, 2024; originally announced May 2024.

Comments: Submitted to IEEE Journal for pos

Deep Learning-Based CSI Feedback for XL-MIMO Systems in the Near-Field Domain

Authors: Zhangjie Peng, Ruijing Liu, Zhaotian Li, Cunhua Pan, Jiangzhou Wang

Abstract: In this paper, we consider an extremely large-scale massive multiple-input-multiple-output (XL-MIMO) system. As the scale of antenna arrays increases, the range of near-field communications also expands. In this case, the signals no longer exhibit planar wave characteristics but spherical wave characteristics in the near-field channel, which makes the channel state information (CSI) highly complex… ▽ More In this paper, we consider an extremely large-scale massive multiple-input-multiple-output (XL-MIMO) system. As the scale of antenna arrays increases, the range of near-field communications also expands. In this case, the signals no longer exhibit planar wave characteristics but spherical wave characteristics in the near-field channel, which makes the channel state information (CSI) highly complex. Additionally, the increase of the antenna arrays scale also makes the size of the CSI matrix significantly increase. Therefore, CSI feedback in the near-field channel becomes highly challenging. To solve this issue, we propose a deep-learning (DL)-based ExtendNLNet that can compress the CSI, and further reduce the overhead of CSI feedback. In addition, we have introduced the Non-Local block to obtain a larger area of CSI features. Simulation results show that the proposed ExtendNLNet can significantly improve the CSI recovery quality compared to other DL-based methods. △ Less

Submitted 22 May, 2024; v1 submitted 14 May, 2024; originally announced May 2024.

Two-Timescale Design for Reconfigurable Intelligent Surface-Aided URLLC

Authors: Qihao Peng, Hong Ren, Cunhua Pan, Maged Elkashlan, Ana Garcia Armada, Petar Popovski

Abstract: In this paper, to tackle the blockage issue in massive multiple-input-multiple-output (mMIMO) systems, a reconfigurable intelligent surface (RIS) is seamlessly deployed to support devices with ultra-reliable and low-latency communications (URLLC). The transmission power of the base station and the phase shifts of the RIS are jointly devised to maximize the weighted sum rate while considering the s… ▽ More In this paper, to tackle the blockage issue in massive multiple-input-multiple-output (mMIMO) systems, a reconfigurable intelligent surface (RIS) is seamlessly deployed to support devices with ultra-reliable and low-latency communications (URLLC). The transmission power of the base station and the phase shifts of the RIS are jointly devised to maximize the weighted sum rate while considering the spatially correlation and channel estimation errors. Firstly, \textcolor{black}{the relationship between the channel estimation error and spatially correlated RIS's elements is revealed by using the linear minimum mean square error}. Secondly, based on the maximum-ratio transmission precoding, a tight lower bound of the rate under short packet transmission is derived. Finally, the NP-hard problem is decomposed into two optimization problems, where the transmission power is obtained by geometric programming and phase shifts are designed by using gradient ascent method. Besides, we have rigorously proved that the proposed algorithm can rapidly converge to a sub-optimal solution with low complexity. Simulation results confirm the tightness between the analytic results and Monte Carlo simulations. Furthermore, the two-timescale scheme provides a practical solution for the short packet transmission. △ Less

Submitted 11 May, 2024; originally announced May 2024.

Comments: This paper has already been accepted by IEEE Transactions on Wireless Communications

Active RIS-Aided Massive MIMO With Imperfect CSI and Phase Noise

Authors: Zhangjie Peng, Jianchen Zhu, Cunhua Pan, Zaichen Zhang, Daniel Benevides da Costa, Maged Elkashlan, George K. Karagiannidis

Abstract: Active reconfigurable intelligent surface (RIS) has attracted significant attention as a recently proposed RIS architecture. Owing to its capability to amplify the incident signals, active RIS can mitigate the multiplicative fading effect inherent in the passive RIS-aided system. In this paper, we consider an active RIS-aided uplink multi-user massive multiple-input multiple-output (MIMO) system i… ▽ More Active reconfigurable intelligent surface (RIS) has attracted significant attention as a recently proposed RIS architecture. Owing to its capability to amplify the incident signals, active RIS can mitigate the multiplicative fading effect inherent in the passive RIS-aided system. In this paper, we consider an active RIS-aided uplink multi-user massive multiple-input multiple-output (MIMO) system in the presence of phase noise at the active RIS. Specifically, we employ a two-timescale scheme, where the beamforming at the base station (BS) is adjusted based on the instantaneous aggregated channel state information (CSI) and the statistical CSI serves as the basis for designing the phase shifts at the active RIS, so that the feedback overhead and computational complexity can be significantly reduced. The aggregated channel composed of the cascaded and direct channels is estimated by utilizing the linear minimum mean square error (LMMSE) technique. Based on the estimated channel, we derive the analytical closed-form expression of a lower bound of the achievable rate. The power scaling laws in the active RIS-aided system are investigated based on the theoretical expressions. When the transmit power of each user is scaled down by the number of BS antennas M or reflecting elements N, we find that the thermal noise will cause the lower bound of the achievable rate to approach zero, as the number of M or N increases to infinity. Moreover, an optimization approach based on genetic algorithms (GA) is introduced to tackle the phase shift optimization problem. Numerical results reveal that the active RIS can greatly enhance the performance of the considered system under various settings. △ Less

Submitted 6 May, 2024; originally announced May 2024.

NMBEnet: Efficient Near-field mmWave Beam Training for Multiuser OFDM Systems Using Sub-6 GHz Pilots

Authors: Wang Liu, Cunhua Pan, Hong Ren, Cheng-Xiang Wang, Jiangzhou Wang, Xiaohu You

Abstract: Combining millimetre-wave (mmWave) communications with an extremely large-scale antenna array (ELAA) presents a promising avenue for meeting the spectral efficiency demands of the future sixth generation (6G) mobile communications. However, beam training for mmWave ELAA systems is challenged by excessive pilot overheads as well as insufficient accuracy, as the huge near-field codebook has to be ac… ▽ More Combining millimetre-wave (mmWave) communications with an extremely large-scale antenna array (ELAA) presents a promising avenue for meeting the spectral efficiency demands of the future sixth generation (6G) mobile communications. However, beam training for mmWave ELAA systems is challenged by excessive pilot overheads as well as insufficient accuracy, as the huge near-field codebook has to be accounted for. In this paper, inspired by the similarity between far-field sub-6 GHz channels and near-field mmWave channels, we propose to leverage sub-6 GHz uplink pilot signals to directly estimate the optimal near-field mmWave codeword, which aims to reduce pilot overhead and bypass the channel estimation. Moreover, we adopt deep learning to perform this dual mapping function, i.e., sub-6 GHz to mmWave, far-field to near-field, and a novel neural network structure called NMBEnet is designed to enhance the precision of beam training. Specifically, when considering the orthogonal frequency division multiplexing (OFDM) communication scenarios with high user density, correlations arise both between signals from different users and between signals from different subcarriers. Accordingly, the convolutional neural network (CNN) module and graph neural network (GNN) module included in the proposed NMBEnet can leverage these two correlations to further enhance the precision of beam training. △ Less

Submitted 23 April, 2024; originally announced April 2024.

Active RIS-Aided Massive MIMO Uplink Systems with Low-Resolution ADCs

Authors: Zhangjie Peng, Zecheng Lu, Xue Liu, Cunhua Pan, Jiangzhou Wang

Abstract: This letter considers an active reconfigurable intelligent surface (RIS)-aided multi-user uplink massive multipleinput multiple-output (MIMO) system with low-resolution analog-to-digital converters (ADCs). The letter derives the closedform approximate expression for the sum achievable rate (AR), where the maximum ratio combination (MRC) processing and low-resolution ADCs are applied at the base st… ▽ More This letter considers an active reconfigurable intelligent surface (RIS)-aided multi-user uplink massive multipleinput multiple-output (MIMO) system with low-resolution analog-to-digital converters (ADCs). The letter derives the closedform approximate expression for the sum achievable rate (AR), where the maximum ratio combination (MRC) processing and low-resolution ADCs are applied at the base station. The system performance is analyzed, and a genetic algorithm (GA)-based method is proposed to optimize the RIS's phase shifts for enhancing the system performance. Numerical results verify the accuracy of the derivations, and demonstrate that the active RIS has an evident performance gain over the passive RIS. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Exploit High-Dimensional RIS Information to Localization: What Is the Impact of Faulty Element?

Authors: Tuo Wu, Cunhua Pan, Kangda Zhi, Hong Ren, Maged Elkashlan, Cheng-Xiang Wang, Robert Schober, Xiaohu You

Abstract: This paper proposes a novel localization algorithm using the reconfigurable intelligent surface (RIS) received signal, i.e., RIS information. Compared with BS received signal, i.e., BS information, RIS information offers higher dimension and richer feature set, thereby providing an enhanced capacity to distinguish positions of the mobile users (MUs). Additionally, we address a practical scenario w… ▽ More This paper proposes a novel localization algorithm using the reconfigurable intelligent surface (RIS) received signal, i.e., RIS information. Compared with BS received signal, i.e., BS information, RIS information offers higher dimension and richer feature set, thereby providing an enhanced capacity to distinguish positions of the mobile users (MUs). Additionally, we address a practical scenario where RIS contains some unknown (number and places) faulty elements that cannot receive signals. Initially, we employ transfer learning to design a two-phase transfer learning (TPTL) algorithm, designed for accurate detection of faulty elements. Then our objective is to regain the information lost from the faulty elements and reconstruct the complete high-dimensional RIS information for localization. To this end, we propose a transfer-enhanced dual-stage (TEDS) algorithm. In \emph{Stage I}, we integrate the CNN and variational autoencoder (VAE) to obtain the RIS information, which in \emph{Stage II}, is input to the transferred DenseNet 121 to estimate the location of the MU. To gain more insight, we propose an alternative algorithm named transfer-enhanced direct fingerprint (TEDF) algorithm which only requires the BS information. The comparison between TEDS and TEDF reveals the effectiveness of faulty element detection and the benefits of utilizing the high-dimensional RIS information for localization. Besides, our empirical results demonstrate that the performance of the localization algorithm is dominated by the high-dimensional RIS information and is robust to unoptimized phase shifts and signal-to-noise ratio (SNR). △ Less

Submitted 28 May, 2024; v1 submitted 25 March, 2024; originally announced March 2024.

Comments: 17 pages, Accepted by IEEE JSAC

Employing High-Dimensional RIS Information for RIS-aided Localization Systems

Authors: Tuo Wu, Cunhua Pan, Kangda Zhi, Hong Ren, Maged Elkashlan, Jiangzhou Wang, Chau Yuen

Abstract: Reconfigurable intelligent surface (RIS)-aided localization systems have attracted extensive research attention due to their accuracy enhancement capabilities. However, most studies primarily utilized the base stations (BS) received signal, i.e., BS information, for localization algorithm design, neglecting the potential of RIS received signal, i.e., RIS information. Compared with BS information,… ▽ More Reconfigurable intelligent surface (RIS)-aided localization systems have attracted extensive research attention due to their accuracy enhancement capabilities. However, most studies primarily utilized the base stations (BS) received signal, i.e., BS information, for localization algorithm design, neglecting the potential of RIS received signal, i.e., RIS information. Compared with BS information, RIS information offers higher dimension and richer feature set, thereby significantly improving the ability to extract positions of the mobile users (MUs). Addressing this oversight, this paper explores the algorithm design based on the high-dimensional RIS information. Specifically, we first propose a RIS information reconstruction (RIS-IR) algorithm to reconstruct the high-dimensional RIS information from the low-dimensional BS information. The proposed RIS-IR algorithm comprises a data processing module for preprocessing BS information, a convolution neural network (CNN) module for feature extraction, and an output module for outputting the reconstructed RIS information. Then, we propose a transfer learning based fingerprint (TFBF) algorithm that employs the reconstructed high-dimensional RIS information for MU localization. This involves adapting a pre-trained DenseNet-121 model to map the reconstructed RIS signal to the MU's three-dimensional (3D) position. Empirical results affirm that the localization performance is significantly influenced by the high-dimensional RIS information and maintains robustness against unoptimized phase shifts. △ Less

Submitted 16 May, 2024; v1 submitted 25 March, 2024; originally announced March 2024.

RIS-assisted Cell-Free Massive MIMO Systems With Two-Timescale Design and Hardware Impairments

Authors: Jianxin Dai, Jin Ge, Kangda Zhi, Cunhua Pan, Youguo Wang

Abstract: Integrating the reconfigurable intelligent surface (RIS) into a cell-free massive multiple-input multiple-output (CF-mMIMO) system is an effective solution to achieve high system capacity with low cost and power consumption. However, existing works of RIS-assisted systems mostly assumed perfect hardware, while the impact of hardware impairments (HWIs) is generally ignored. In this paper, we consid… ▽ More Integrating the reconfigurable intelligent surface (RIS) into a cell-free massive multiple-input multiple-output (CF-mMIMO) system is an effective solution to achieve high system capacity with low cost and power consumption. However, existing works of RIS-assisted systems mostly assumed perfect hardware, while the impact of hardware impairments (HWIs) is generally ignored. In this paper, we consider the general Rician fading channel and uplink transmission of the RIS-assisted CF-mMIMO system under transceiver impairments and RIS phase noise. To reduce the feedback overhead and power consumption, we propose a two-timescale transmission scheme to optimize the passive beamformers at RISs with statistical channel state information (CSI), while transmit beamformers at access points (APs) are designed based on instantaneous CSI. Also, the maximum ratio combining (MRC) detection is applied to the central processing unit (CPU). On this basis, we derive the closed-form approximate expression of the achievable rate, based on which the impact of HWIs and the power scaling laws are analyzed to draw useful theoretical insights. To maximize the users' sum rate or minimum rate, we first transform our rate expression into a tractable form, and then optimize the phase shifts of RISs based on an accelerated gradient ascent method. Finally, numerical results are presented to demonstrate the correctness of our derived expressions and validate the previous analysis, which provide some guidelines for the practical application of the imperfect RISs in the CF-mMIMO with transceiver HWIs. △ Less

Submitted 26 March, 2024; v1 submitted 22 March, 2024; originally announced March 2024.

Comments: 51 pages, 11 figures

Large-Scale RIS Enabled Air-Ground Channels: Near-Field Modeling and Analysis

Authors: Hao Jiang, Wangqi Shi, Zaichen Zhang, Cunhua Pan, Qingqing Wu, Feng Shu, Ruiqi Liu, Jiangzhou Wang

Abstract: Existing works mainly rely on the far-field planar-wave-based channel model to assess the performance of reconfigurable intelligent surface (RIS)-enabled wireless communication systems. However, when the transmitter and receiver are in near-field ranges, this will result in relatively low computing accuracy. To tackle this challenge, we initially develop an analytical framework for sub-array parti… ▽ More Existing works mainly rely on the far-field planar-wave-based channel model to assess the performance of reconfigurable intelligent surface (RIS)-enabled wireless communication systems. However, when the transmitter and receiver are in near-field ranges, this will result in relatively low computing accuracy. To tackle this challenge, we initially develop an analytical framework for sub-array partitioning. This framework divides the large-scale RIS array into multiple sub-arrays, effectively reducing modeling complexity while maintaining acceptable accuracy. Then, we develop a beam domain channel model based on the proposed sub-array partition framework for large-scale RIS-enabled UAV-to-vehicle communication systems, which can be used to efficiently capture the sparse features in RIS-enabled UAV-to-vehicle channels in both near-field and far-field ranges. Furthermore, some important propagation characteristics of the proposed channel model, including the spatial cross-correlation functions (CCFs), temporal auto-correlation functions (ACFs), frequency correlation functions (CFs), and channel capacities with respect to the different physical features of the RIS and non-stationary properties of the channel model are derived and analyzed. Finally, simulation results are provided to demonstrate that the proposed framework is helpful to achieve a good tradeoff between model complexity and accuracy for investigating the channel propagation characteristics, and therefore providing highly-efficient communications in RIS-enabled UAV-to-vehicle wireless networks. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Deep Learning-Based CSI Feedback for RIS-Aided Massive MIMO Systems with Time Correlation

Authors: Zhangjie Peng, Zhaotian Li, Ruijing Liu, Cunhua Pan, Feiniu Yuan, Jiangzhou Wang

Abstract: In this paper, we consider an reconfigurable intelligent surface (RIS)-aided frequency division duplex (FDD) massive multiple-input multiple-output (MIMO) downlink system.In the FDD systems, the downlink channel state information (CSI) should be sent to the base station through the feedback link. However, the overhead of CSI feedback occupies substantial uplink bandwidth resources in RIS-aided com… ▽ More In this paper, we consider an reconfigurable intelligent surface (RIS)-aided frequency division duplex (FDD) massive multiple-input multiple-output (MIMO) downlink system.In the FDD systems, the downlink channel state information (CSI) should be sent to the base station through the feedback link. However, the overhead of CSI feedback occupies substantial uplink bandwidth resources in RIS-aided communication systems. In this work, we propose a deep learning (DL)-based scheme to reduce the overhead of CSI feedback by compressing the cascaded CSI. In the practical RIS-aided communication systems, the cascaded channel at the adjacent slots inevitably has time correlation. We use long short-term memory to learn time correlation, which can help the neural network to improve the recovery quality of the compressed CSI. Moreover, the attention mechanism is introduced to further improve the CSI recovery quality. Simulation results demonstrate that our proposed DLbased scheme can significantly outperform other DL-based methods in terms of the CSI recovery quality △ Less

Submitted 19 March, 2024; originally announced March 2024.

Beamforming Design for Double-Active-RIS-aided Communication Systems with Inter-Excitation

Authors: Boshi Wang, Cunhua Pan, Hong Ren, Zhiyuan Yu, Yang Zhang, Mengyu Liu, Gui Zhou

Abstract: In this paper, we investigate a double-active-reconfigurable intelligent surface (RIS)-aided downlink wireless communication system, where a multi-antenna base station (BS) serves multiple single-antenna users with both double reflection and single reflection links. Due to the signal amplification capability of active RISs, the mutual influence between active RISs, which is termed as the "inter-ex… ▽ More In this paper, we investigate a double-active-reconfigurable intelligent surface (RIS)-aided downlink wireless communication system, where a multi-antenna base station (BS) serves multiple single-antenna users with both double reflection and single reflection links. Due to the signal amplification capability of active RISs, the mutual influence between active RISs, which is termed as the "inter-excitation" effect, cannot be ignored. Then, we develop a feedback-type model to characterize the signal containing the inter-excitation effect. Based on the signal model, we formulate a weighted sum rate (WSR) maximization problem by jointly optimizing the beamforming matrix at the BS and the reflecting coefficient matrices at the two active RISs, subject to power constraints at the BS and active RISs, as well as the maximum amplification gain constraints of the active RISs. To solve this non-convex problem, we first transform the problem into a more tractable form using the fractional programming (FP) method. Then, by introducing auxiliary variables, the problem can be converted into an equivalent form that can be solved by using a low-complexity penalty dual decomposition (PDD) algorithm. Finally, simulation results indicate that it is crucial to consider the inter-excitation effect between active RISs in beamforming design for double-active-RIS-aided communication systems. Additionally, it prevails over other benchmark schemes with single active RIS and double passive RISs in terms of achievable rate. △ Less

Submitted 16 March, 2024; originally announced March 2024.

Joint Optimization for Achieving Covertness in MIMO Over-the-Air Computation Networks

Authors: Junteng Yao, Tuo Wu, Ming Jin, Cunhua Pan, Quanzhong Li, Jinhong Yuan

Abstract: This paper investigates covert data transmission within a multiple-input multiple-output (MIMO) over-the-air computation (AirComp) network, where sensors transmit data to the access point (AP) while guaranteeing covertness to the warden (Willie). Simultaneously, the AP introduces artificial noise (AN) to confuse Willie, meeting the covert requirement. We address the challenge of minimizing mean-sq… ▽ More This paper investigates covert data transmission within a multiple-input multiple-output (MIMO) over-the-air computation (AirComp) network, where sensors transmit data to the access point (AP) while guaranteeing covertness to the warden (Willie). Simultaneously, the AP introduces artificial noise (AN) to confuse Willie, meeting the covert requirement. We address the challenge of minimizing mean-square-error (MSE) of the AP, while considering transmit power constraints at both the AP and the sensors, as well as ensuring the covert transmission to Willie with a low detection error probability (DEP). However, obtaining globally optimal solutions for the investigated non-convex problem is challenging due to the interdependence of optimization variables. To tackle this problem, we introduce an exact penalty algorithm and transform the optimization problem into a difference-of-convex (DC) form problem to find a locally optimal solution. Simulation results showcase the superior performance in terms of our proposed scheme in comparison to the benchmark schemes. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Radar Rainbow Beams For Wideband mmWave Communication: Beam Training And Tracking

Authors: Gui Zhou, Moritz Garkisch, Zhendong Peng, Cunhua Pan, Robert Schober

Abstract: We propose a novel integrated sensing and communication (ISAC) system that leverages sensing to assist communication, ensuring fast initial access, seamless user tracking, and uninterrupted communication for millimeter wave (mmWave) wideband systems. True-time-delayers (TTDs) are utilized to generate frequency-dependent radar rainbow beams by controlling the beam squint effect. These beams cover u… ▽ More We propose a novel integrated sensing and communication (ISAC) system that leverages sensing to assist communication, ensuring fast initial access, seamless user tracking, and uninterrupted communication for millimeter wave (mmWave) wideband systems. True-time-delayers (TTDs) are utilized to generate frequency-dependent radar rainbow beams by controlling the beam squint effect. These beams cover users across the entire angular space simultaneously for fast beam training using just one orthogonal frequency-division multiplexing (OFDM) symbol. Three detection and estimation schemes are proposed based on radar rainbow beams for estimation of the users' angles, distances, and velocities, which are then exploited for communication beamformer design. The first proposed scheme utilizes a single-antenna radar receiver and one set of rainbow beams, but may cause a Doppler ambiguity. To tackle this limitation, two additional schemes are introduced, utilizing two sets of rainbow beams and a multi-antenna receiver, respectively. Furthermore, the proposed detection and estimation schemes are extended to realize user tracking by choosing different subsets of OFDM subcarriers. This approach eliminates the need to switch phase shifters and TTDs, which are typically necessary in existing tracking technologies, thereby reducing the demands on the control circurity. Simulation results reveal the effectiveness of the proposed rainbow beam-based training and tracking methods for mobile users. Notably, the scheme employing a multi-antenna radar receiver can accurately estimate the channel parameters and can support communication rates comparable to those achieved with perfect channel information. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Comments: 32 pages

Performance Analysis on RIS-Aided Wideband Massive MIMO OFDM Systems with Low-Resolution ADCs

Authors: Xianzhe Chen, Hong Ren, Cunhua Pan, Zhangjie Peng, Kangda Zhi, Yong Liu, Xiaojun Xi, Ana Garcia Armada, Cheng-Xiang Wang

Abstract: This paper investigates a reconfigurable intelligent surface (RIS)-aided wideband massive multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) system with low-resolution analog-to-digital converters (ADCs). Frequency-selective Rician fading channels are considered, and the OFDM data transmission process is presented in time domain. This paper derives the closed-f… ▽ More This paper investigates a reconfigurable intelligent surface (RIS)-aided wideband massive multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) system with low-resolution analog-to-digital converters (ADCs). Frequency-selective Rician fading channels are considered, and the OFDM data transmission process is presented in time domain. This paper derives the closed-form approximate expression of the uplink achievable rate, based on which the asymptotic system performance is analyzed when the number of the antennas at the base station and the number of reflecting elements at the RIS grow to infinity. Besides, the power scaling laws of the considered system are revealed to provide energy-saving insights. Furthermore, this paper proposes a gradient ascent-based algorithm to design the phase shifts of the RIS for maximizing the minimum user rate. Finally, numerical results are presented to verify the correctness of analytical conclusions and draw insights. △ Less

Submitted 13 March, 2024; originally announced March 2024.

LightM-UNet: Mamba Assists in Lightweight UNet for Medical Image Segmentation

Authors: Weibin Liao, Yinghao Zhu, Xinyuan Wang, Chengwei Pan, Yasha Wang, Liantao Ma

Abstract: UNet and its variants have been widely used in medical image segmentation. However, these models, especially those based on Transformer architectures, pose challenges due to their large number of parameters and computational loads, making them unsuitable for mobile health applications. Recently, State Space Models (SSMs), exemplified by Mamba, have emerged as competitive alternatives to CNN and Tr… ▽ More UNet and its variants have been widely used in medical image segmentation. However, these models, especially those based on Transformer architectures, pose challenges due to their large number of parameters and computational loads, making them unsuitable for mobile health applications. Recently, State Space Models (SSMs), exemplified by Mamba, have emerged as competitive alternatives to CNN and Transformer architectures. Building upon this, we employ Mamba as a lightweight substitute for CNN and Transformer within UNet, aiming at tackling challenges stemming from computational resource limitations in real medical settings. To this end, we introduce the Lightweight Mamba UNet (LightM-UNet) that integrates Mamba and UNet in a lightweight framework. Specifically, LightM-UNet leverages the Residual Vision Mamba Layer in a pure Mamba fashion to extract deep semantic features and model long-range spatial dependencies, with linear computational complexity. Extensive experiments conducted on two real-world 2D/3D datasets demonstrate that LightM-UNet surpasses existing state-of-the-art literature. Notably, when compared to the renowned nnU-Net, LightM-UNet achieves superior segmentation performance while drastically reducing parameter and computation costs by 116x and 21x, respectively. This highlights the potential of Mamba in facilitating model lightweighting. Our code implementation is publicly available at https://github.com/MrBlankness/LightM-UNet. △ Less

Submitted 11 March, 2024; v1 submitted 8 March, 2024; originally announced March 2024.

Secure MIMO Communication Relying on Movable Antennas

Authors: Jun Tang, Cunhua Pan, Yang Zhang, Hong Ren, Kezhi Wang

Abstract: This paper considers a movable antenna (MA)-aided secure multiple-input multiple-output (MIMO) communication system consisting of a base station (BS), a legitimate information receiver (IR) and an eavesdropper (Eve), where the BS is equipped with MAs to enhance the system's physical layer security (PLS). Specifically, we aim to maximize the secrecy rate (SR) by jointly optimizing the transmit prec… ▽ More This paper considers a movable antenna (MA)-aided secure multiple-input multiple-output (MIMO) communication system consisting of a base station (BS), a legitimate information receiver (IR) and an eavesdropper (Eve), where the BS is equipped with MAs to enhance the system's physical layer security (PLS). Specifically, we aim to maximize the secrecy rate (SR) by jointly optimizing the transmit precoding (TPC) matrix, the artificial noise (AN) covariance matrix and the MAs' positions under the constraints of the maximum transmit power and the minimum distance between MAs. To solve this non-convex problem with highly coupled optimization variables, the block coordinate descent (BCD) method is applied to alternately update the variables. Specifically, we first reformulate the SR into a tractable form by utilizing the minimum mean square error (MMSE) method, and derive the optimal TPC matrix and the AN covariance matrix with fixed MAs' positions by applying the Lagrangian multiplier method in semi-closed forms. Then, the majorization-minimization (MM) algorithm is employed to iteratively optimize each MA's position while keeping others fixed. Finally, simulation results are provided to demonstrate the effectiveness of the proposed algorithms and the significant advantages of the MA-aided system over conventional fixed position antenna (FPA)-based system in enhancing system's security. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Tensor Decomposition-based Time Varying Channel Estimation for mmWave MIMO-OFDM Systems

Authors: Ruizhe Wang, Hong Ren, Cunhua Pan, Gui Zhou, Jiangzhou Wang

Abstract: In this paper, we consider the time-varying channel estimation in millimeter wave (mmWave) multiple-input multiple-output MIMO systems with hybrid beamforming architectures. Different from the existing contributions that considered single-carrier mmWave systems with high mobility, the wideband orthogonal frequency division multiplexing (OFDM) system is considered in this work. To solve the channel… ▽ More In this paper, we consider the time-varying channel estimation in millimeter wave (mmWave) multiple-input multiple-output MIMO systems with hybrid beamforming architectures. Different from the existing contributions that considered single-carrier mmWave systems with high mobility, the wideband orthogonal frequency division multiplexing (OFDM) system is considered in this work. To solve the channel estimation problem under channel double selectivity, we propose a pilot transmission scheme based on 5G OFDM, and the received signals are formed as a fourth-order tensor, which fits the low-rank CANDECOMP/PARAFAC (CP) model. By further exploring the Vandermonde structure of factor matrix, a tensor-subspace decomposition based channel estimation method is proposed to solve the CP decomposition, where the uniqueness condition is analyzed. Based on the decomposed factor matrices, the channel parameters, including angles of arrival/departure, delays, channel gains and Doppler shifts are estimated, and the Cramér-Rao bound (CRB) results are derived as performance metrics. Simulation results demonstrate the superior performance of the proposed method over other benchmarks. Furthermore, the channel estimation methods are tested based on the channel parameters generated by Wireless InSites, and simulation results show the effectiveness of the proposed method in practical scenarios. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Target Localization and Performance Trade-Offs in Cooperative ISAC Systems: A Scheme Based on 5G NR OFDM Signals

Authors: Zhenkun Zhang, Hong Ren, Cunhua Pan, Sheng Hong, Dongming Wang, Jiangzhou Wang, Xiaohu You

Abstract: The integration of sensing capabilities into communication systems, by sharing physical resources, has a significant potential for reducing spectrum, hardware, and energy costs while inspiring innovative applications. Cooperative networks, in particular, are expected to enhance sensing services by enlarging the coverage area and enriching sensing measurements, thus improving the service availabili… ▽ More The integration of sensing capabilities into communication systems, by sharing physical resources, has a significant potential for reducing spectrum, hardware, and energy costs while inspiring innovative applications. Cooperative networks, in particular, are expected to enhance sensing services by enlarging the coverage area and enriching sensing measurements, thus improving the service availability and accuracy. This paper proposes a cooperative integrated sensing and communication (ISAC) framework by leveraging information-carrying orthogonal frequency division multiplexing (OFDM) signals transmitted by access points (APs). Specifically, we propose a two-stage scheme for target localization, where communication signals are reused as sensing reference signals based on the system information shared at the central processing unit (CPU). In Stage I, we measure the ranges of scattered paths induced by targets, through the extraction of time-delay information from the received signals at APs. Then, the target locations are estimated in Stage II based on these range measurements. Considering that the scattered paths corresponding to some targets may not be detectable by all APs, we propose an effective algorithm to match the range measurements with the targets and achieve the target location estimation. Notably, by analyzing the OFDM numerologies defined in fifth generation (5G) standards, we elucidate the flexibility and consistency of performance trade-offs in both communication and sensing aspects. Finally, numerical results confirm the effectiveness of our sensing scheme and the cooperative gain of the ISAC framework. △ Less

Submitted 4 March, 2024; originally announced March 2024.

OTFS vs OFDM: Which is Superior in Multiuser LEO Satellite Communications

Authors: Yu Liu, Ming Chen, Cunhua Pan, Tantao Gong, Jinhong Yuan, Jiangzhou Wang

Abstract: Orthogonal time frequency space (OTFS) modulation, a delay-Doppler (DD) domain communication scheme exhibiting strong robustness against the Doppler shifts, has the potentials to be employed in LEO satellite communications. However, the performance comparison with the orthogonal frequency division multiplexing (OFDM) modulation and the resource allocation scheme for multiuser OTFS-based LEO satell… ▽ More Orthogonal time frequency space (OTFS) modulation, a delay-Doppler (DD) domain communication scheme exhibiting strong robustness against the Doppler shifts, has the potentials to be employed in LEO satellite communications. However, the performance comparison with the orthogonal frequency division multiplexing (OFDM) modulation and the resource allocation scheme for multiuser OTFS-based LEO satellite communication system have rarely been investigated. In this paper, we conduct a performance comparison under various channel conditions between the OTFS and OFDM modulations, encompassing evaluations of sum-rate and bit error ratio (BER). Additionally, we investigate the joint optimal allocation of power and delay-Doppler resource blocks aiming at maximizing sum-rate for multiuser downlink OTFS-based LEO satellite communication systems. Unlike the conventional modulations relaying on complex input-output relations within the Time-Frequency (TF) domain, the OTFS modulation exploits both time and frequency diversities, i.e., delay and Doppler shifts remain constant during a OTFS frame, which facilitates a DD domain input-output simple relation for our investigation. We transform the resulting non-convex and combinatorial optimization problem into an equivalent difference of convex problem by decoupling the conditional constraints, and solve the transformed problem via penalty convex-concave procedure algorithm. Simulation results demonstrate that the OTFS modulation is robust to carrier frequency offsets (CFO) caused by high-mobility of LEO satellites, and has superior performance to the OFDM modulation. Moreover, numerical results indicate that our proposed resource allocation scheme has higher sum-rate than existed schemes for the OTFS modulation, such as delay divided multiple access and Doppler divided multiple access, especially in the high signal-to-noise ratio (SNR) regime. △ Less

Submitted 4 March, 2024; originally announced March 2024.

Comments: 13 pages, 9 figures

Exploring Fairness for FAS-assisted Communication Systems: from NOMA to OMA

Authors: Junteng Yao, Liaoshi Zhou, Tuo Wu, Ming Jin, Cunhua Pan, Maged Elkashlan, Kai-Kit Wong

Abstract: This paper addresses the fairness issue within fluid antenna system (FAS)-assisted non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA) systems, where a single fixed-antenna base station (BS) transmits superposition-coded signals to two users, each with a single fluid antenna. We define fairness through the minimization of the maximum outage probability for the two users, und… ▽ More This paper addresses the fairness issue within fluid antenna system (FAS)-assisted non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA) systems, where a single fixed-antenna base station (BS) transmits superposition-coded signals to two users, each with a single fluid antenna. We define fairness through the minimization of the maximum outage probability for the two users, under total resource constraints for both FAS-assisted NOMA and OMA systems. Specifically, in the FAS-assisted NOMA systems, we study both a special case and the general case, deriving a closed-form solution for the former and applying a bisection search method to find the optimal solution for the latter. Moreover, for the general case, we derive a locally optimal closed-form solution to achieve fairness. In the FAS-assisted OMA systems, to deal with the non-convex optimization problem with coupling of the variables in the objective function, we employ an approximation strategy to facilitate a successive convex approximation (SCA)-based algorithm, achieving locally optimal solutions for both cases. Empirical analysis validates that our proposed solutions outperform conventional NOMA and OMA benchmarks in terms of fairness. △ Less

Submitted 1 March, 2024; originally announced March 2024.

GAN Based Near-Field Channel Estimation for Extremely Large-Scale MIMO Systems

Authors: Ming Ye, Xiao Liang, Cunhua Pan, Yinfei Xu, Ming Jiang, Chunguo Li

Abstract: Extremely large-scale multiple-input-multiple-output (XL-MIMO) is a promising technique to achieve ultra-high spectral efficiency for future 6G communications. The mixed line-of-sight (LoS) and non-line-of-sight (NLoS) XL-MIMO near-field channel model is adopted to describe the XL-MIMO near-field channel accurately. In this paper, a generative adversarial network (GAN) variant based channel estima… ▽ More Extremely large-scale multiple-input-multiple-output (XL-MIMO) is a promising technique to achieve ultra-high spectral efficiency for future 6G communications. The mixed line-of-sight (LoS) and non-line-of-sight (NLoS) XL-MIMO near-field channel model is adopted to describe the XL-MIMO near-field channel accurately. In this paper, a generative adversarial network (GAN) variant based channel estimation method is proposed for XL-MIMO systems. Specifically, the GAN variant is developed to simultaneously estimate the LoS and NLoS path components of the XL-MIMO channel. The initially estimated channels instead of the received signals are input into the GAN variant as the conditional input to generate the XL-MIMO channels more efficiently. The GAN variant not only learns the mapping from the initially estimated channels to the XL-MIMO channels but also learns an adversarial loss. Moreover, we combine the adversarial loss with a conventional loss function to ensure the correct direction of training the generator. To further enhance the estimation performance, we investigate the impact of the hyper-parameter of the loss function on the performance of our method. Simulation results show that the proposed method outperforms the existing channel estimation approaches in the adopted channel model. In addition, the proposed method surpasses the Cram$\acute{\mathbf{e}}$r-Rao lower bound (CRLB) under low pilot overhead. △ Less

Submitted 17 June, 2024; v1 submitted 27 February, 2024; originally announced February 2024.

Comments: 13 pages, 9 figures, 3 tables, accepted by IEEE TGCN

Reconfigurable Intelligent Surface assisted Integrated Communication, Sensing, and Computation Systems

Authors: Jiahua Wan, Hong Ren, Zhiyuan Yu, Zhenkun Zhang, Yang Zhang, Cunhua Pan, Jiangzhou Wang

Abstract: This paper studies a mobile edge computing (MEC) assisted integrated sensing and communication (ISAC), where reconfigurable intelligent surface (RIS) is used to alleviate the attenuation of communication links during computational offloading. In this paradigm, the dual function radar and communication (DFRC)-enabled user equipments (UEs) simultaneously perform radar sensing and communication tasks… ▽ More This paper studies a mobile edge computing (MEC) assisted integrated sensing and communication (ISAC), where reconfigurable intelligent surface (RIS) is used to alleviate the attenuation of communication links during computational offloading. In this paradigm, the dual function radar and communication (DFRC)-enabled user equipments (UEs) simultaneously perform radar sensing and communication tasks, facilitating the offloading of partial computational tasks to an edge computing server (ECS) through an RIS. To satisfy the critical need for time-efficient sensing, we investigate the latency minimization problem for both single-UE and multi-UE scenarios, subject to constraints on UEs' transmit power, radar signal-to-interference-plus-noise-ratio (SINR), RIS phase shift, and computation capability. To address the formulated non-convex problem, we propose an algorithm based on the block coordinate descent (BCD) method to decouple the original problem into two subproblems, where the computational and beamforming settings are optimized alternately. Specifically, we employ the Lagrangian method for the optimization of computational settings. In addition, two equivalent transformations are applied to transform the objective function (OF) of the subproblem for active and passive beamforming into a form of weighted sum-rate. Then, a combination of minimum variance distortionless response (MVDR), successive convex approximation (SCA), majorization-minimization (MM), and weighted minimum mean-square error (WMMSE) techniques are applied to tackle this subproblem. Moreover, a closed-form solution is obtained in the simplified single UE scenario. Finally, simulation results substantiate the effectiveness of the proposed system. △ Less

Submitted 14 March, 2024; v1 submitted 21 February, 2024; originally announced February 2024.

Near-Field Multiuser Beam-Training for Extremely Large-Scale MIMO Systems

Authors: Wang Liu, Cunhua Pan, Hong Ren, Jiangzhou Wang, Robert Schober, Lajos Hanzo

Abstract: Extremely large-scale multiple-input multiple-output (XL-MIMO) systems are capable of improving spectral efficiency by employing far more antennas than conventional massive MIMO at the base station (BS). However, beam training in multiuser XL-MIMO systems is challenging. To tackle these issues, we conceive a three-phase graph neural network (GNN)-based beam training scheme for multiuser XL-MIMO sy… ▽ More Extremely large-scale multiple-input multiple-output (XL-MIMO) systems are capable of improving spectral efficiency by employing far more antennas than conventional massive MIMO at the base station (BS). However, beam training in multiuser XL-MIMO systems is challenging. To tackle these issues, we conceive a three-phase graph neural network (GNN)-based beam training scheme for multiuser XL-MIMO systems. In the first phase, only far-field wide beams have to be tested for each user and the GNN is utilized to map the beamforming gain information of the far-field wide beams to the optimal near-field beam for each user. In addition, the proposed GNN-based scheme can exploit the position-correlation between adjacent users for further improvement of the accuracy of beam training. In the second phase, a beam allocation scheme based on the probability vectors produced at the outputs of GNNs is proposed to address the above beam-direction conflicts between users. In the third phase, the hybrid TBF is designed for further reducing the inter-user interference. Our simulation results show that the proposed scheme improves the beam training performance of the benchmarks. Moreover, the performance of the proposed beam training scheme approaches that of an exhaustive search, despite requiring only about 7% of the pilot overhead. △ Less

Submitted 25 March, 2024; v1 submitted 21 February, 2024; originally announced February 2024.

Comments: submitted to IEEE

Beamforming Optimization for Active RIS-Aided Multiuser Communications With Hardware Impairments

Authors: Zhangjie Peng, Zhibo Zhang, Cunhua Pan, Marco Di Renzo, Octavia A. Dobre, Jiangzhou Wang

Abstract: In this paper, we consider an active reconfigurable intelligent surface (RIS) to assist the multiuser downlink transmission in the presence of practical hardware impairments (HWIs), including the HWIs at the transceivers and the phase noise at the active RIS. The active RIS is deployed to amplify the incident signals to alleviate the multiplicative fading effect, which is a limitation in the conve… ▽ More In this paper, we consider an active reconfigurable intelligent surface (RIS) to assist the multiuser downlink transmission in the presence of practical hardware impairments (HWIs), including the HWIs at the transceivers and the phase noise at the active RIS. The active RIS is deployed to amplify the incident signals to alleviate the multiplicative fading effect, which is a limitation in the conventional passive RIS-aided wireless systems. We aim to maximize the sum rate through jointly designing the transmit beamforming at the base station (BS), the amplification factors and the phase shifts at the active RIS. To tackle this challenging optimization problem effectively, we decouple it into two tractable subproblems. Subsequently, each subproblem is transformed into a second order cone programming problem. The block coordinate descent framework is applied to tackle them, where the transmit beamforming and the reflection coefficients are alternately designed. In addition, another efficient algorithm is presented to reduce the computational complexity. Specifically, by exploiting the majorization-minimization approach, each subproblem is reformulated into a tractable surrogate problem, whose closed-form solutions are obtained by Lagrange dual decomposition approach and element-wise alternating sequential optimization method. Simulation results validate the effectiveness of our developed algorithms, and reveal that the HWIs significantly limit the system performance of active RIS-empowered wireless communications. Furthermore, the active RIS noticeably boosts the sum rate under the same total power budget, compared with the passive RIS. △ Less

Submitted 16 February, 2024; originally announced February 2024.

Comments: 16 pages, 8 figures, accepted by IEEE Transactions on Wireless Communications

Reconfigurable Intelligent Surface-Aided Dual-Function Radar and Communication Systems With MU-MIMO Communication

Authors: Yasheng Jin, Hong Ren, Cunhua Pan, Zhiyuan Yu, Ruisong Weng, Boshi Wang, Gui Zhou, Yongchao He, Maged Elkashlan

Abstract: In this paper, we investigate an reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system. Our objective is to maximize the achievable sum rate of the multi-antenna communication users through the joint active and passive beamforming. {Specifically}, the weighted minimum mean-square error (WMMSE) method is { first} used to reformulate the original problem i… ▽ More In this paper, we investigate an reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system. Our objective is to maximize the achievable sum rate of the multi-antenna communication users through the joint active and passive beamforming. {Specifically}, the weighted minimum mean-square error (WMMSE) method is { first} used to reformulate the original problem into an equivalent one. Then, we utilize an alternating optimization (AO) { algorithm} to decouple the optimization variables and decompose this challenging problem into two subproblems. Given reflecting coefficients, a penalty-based algorithm is utilized to deal with the non-convex radar signal-to-noise ratio (SNR) constraints. For the given beamforming matrix of the BS, we apply majorization-minimization (MM) to transform the problem into a quadratic constraint quadratic programming (QCQP) problem, which is ultimately solved using a semidefinite relaxation (SDR)-based algorithm. Simulation results illustrate the advantage of deploying RIS in the considered multi-user MIMO (MU-MIMO) ISAC systems. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Joint Beamforming Design for Double Active RIS-assisted Radar-Communication Coexistence Systems

Authors: Mengyu Liu, Hong Ren, Cunhua Pan, Boshi Wang, Zhiyuan Yu, Ruisong Weng, Kangda Zhi, Yongchao He

Abstract: Integrated sensing and communication (ISAC) technology has been considered as one of the key candidate technologies in the next-generation wireless communication systems. However, when radar and communication equipment coexist in the same system, i.e. radar-communication coexistence (RCC), the interference from communication systems to radar can be large and cannot be ignored. Recently, reconfigur… ▽ More Integrated sensing and communication (ISAC) technology has been considered as one of the key candidate technologies in the next-generation wireless communication systems. However, when radar and communication equipment coexist in the same system, i.e. radar-communication coexistence (RCC), the interference from communication systems to radar can be large and cannot be ignored. Recently, reconfigurable intelligent surface (RIS) has been introduced into RCC systems to reduce the interference. However, the "multiplicative fading" effect introduced by passive RIS limits its performance. To tackle this issue, we consider a double active RIS-assisted RCC system, which focuses on the design of the radar's beamforming vector and the active RISs' reflecting coefficient matrices, to maximize the achievable data rate of the communication system. The considered system needs to meet the radar detection constraint and the power budgets at the radar and the RISs. Since the problem is non-convex, we propose an algorithm based on the penalty dual decomposition (PDD) framework. Specifically, we initially introduce auxiliary variables to reformulate the coupled variables into equation constraints and incorporate these constraints into the objective function through the PDD framework. Then, we decouple the equivalent problem into several subproblems by invoking the block coordinate descent (BCD) method. Furthermore, we employ the Lagrange dual method to alternately optimize these subproblems. Simulation results verify the effectiveness of the proposed algorithm. Furthermore, the results also show that under the same power budget, deploying double active RISs in RCC systems can achieve higher data rate than those with single active RIS and double passive RISs. △ Less

Submitted 6 February, 2024; originally announced February 2024.

FAS-assisted Wireless Powered Communication Systems

Authors: Xiazhi Lai, Kangda Zhi, Wanyi Li, Tuo Wu, Cunhua Pan, Maged Elkashlan

Abstract: Fluid Antenna System (FAS) is recognized as a promising technology for enhancing communication performance. In this context, we explored the potential of FAS-assisted wireless powered communication systems. Specifically, the transmitter, equipped with FAS, harvests the radio frequency (RF) signal from a power beacon and utilizes the harvested energy for data transmission to the receiver. To evalua… ▽ More Fluid Antenna System (FAS) is recognized as a promising technology for enhancing communication performance. In this context, we explored the potential of FAS-assisted wireless powered communication systems. Specifically, the transmitter, equipped with FAS, harvests the radio frequency (RF) signal from a power beacon and utilizes the harvested energy for data transmission to the receiver. To evaluate the performance of the considered systems, we derive both the analytical and asymptotic expressions of the outage probability. Simulation results indicate that the diversity of the considered network closely aligns with the number of ports. Besides, it is also revealed that the port selection criteria based solely on single-hop configurations yield a diversity order of only one. △ Less

Submitted 3 February, 2024; originally announced February 2024.

Secure Wireless Communication in Active RIS-Assisted DFRC System

Authors: Yang Zhang, Hong Ren, Cunhua Pan, Boshi Wang, Zhiyuan Yu, Ruisong Weng, Tuo Wu, Yongchao He

Abstract: This work considers a dual-functional radar and communication (DFRC) system with an active reconfigurable intelligent surface (RIS) and a potential eavesdropper. Our purpose is to maximize the secrecy rate (SR) of the system by jointly designing the beamforming matrix at the DFRC base station (BS) and the reflecting coefficients at the active RIS, subject to the signal-to-interference-plus-noise-r… ▽ More This work considers a dual-functional radar and communication (DFRC) system with an active reconfigurable intelligent surface (RIS) and a potential eavesdropper. Our purpose is to maximize the secrecy rate (SR) of the system by jointly designing the beamforming matrix at the DFRC base station (BS) and the reflecting coefficients at the active RIS, subject to the signal-to-interference-plus-noise-ratio (SINR) constraint of the radar echo and the power consumption constraints at the DFRC-BS and active RIS. An alternating optimization (AO) algorithm based on semi-definite relaxation (SDR) and majorizationminimization (MM) is applied to solve the SR-maximization problem by alternately optimizing the beamforming matrix and the reflecting coefficients. Specifically, we first apply the SDR and successive convex approximation (SCA) methods to transform the two subproblems into more tractable forms, then the MM method is applied to derive a concave surrogate function and iteratively solve the subproblems. Finally, simulation results indicate that the active RIS can better confront the impact of "multiplicative fading" and outperforms traditional passive RIS in terms of both secure data rate and radar sensing performance. △ Less

Submitted 3 February, 2024; originally announced February 2024.

Comments: 13 pages, 9 figures

Quantized RIS-aided mmWave Massive MIMO Channel Estimation with Uniform Planar Arrays

Authors: Ruizhe Wang, Hong Ren, Cunhua Pan, Shi Jin, Petar Popovski, Jiangzhou Wang

Abstract: In this paper, we investigate a cascaded channel estimation method for a millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) system aided by a reconfigurable intelligent surface (RIS) with the BS equipped with low-resolution analog-to-digital converters (ADCs), where the BS and the RIS are both equipped with a uniform planar array (UPA). Due to the sparse property of mmWave chan… ▽ More In this paper, we investigate a cascaded channel estimation method for a millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) system aided by a reconfigurable intelligent surface (RIS) with the BS equipped with low-resolution analog-to-digital converters (ADCs), where the BS and the RIS are both equipped with a uniform planar array (UPA). Due to the sparse property of mmWave channel, the channel estimation can be solved as a compressed sensing (CS) problem. However, the low-resolution quantization cause severe information loss of signals, and traditional CS algorithms are unable to work well. To recovery the signal and the sparse angular domain channel from quantization, we introduce Bayesian inference and efficient vector approximate message passing (VAMP) algorithm to solve the quantize output CS problem. To further improve the efficiency of the VAMP algorithm, a Fast Fourier Transform (FFT) based fast computation method is derived. Simulation results demonstrate the effectiveness and the accuracy of the proposed cascaded channel estimation method for the RIS-aided mmWave massive MIMO system with few-bit ADCs. Furthermore, the proposed channel estimation method can reach an acceptable performance gap between the low-resolution ADCs and the infinite ADCs for the low signal-to-noise ratio (SNR), which implies the applicability of few-bit ADCs in practice. △ Less

Submitted 14 January, 2024; originally announced January 2024.

Leveraging Frequency Domain Learning in 3D Vessel Segmentation

Authors: Xinyuan Wang, Chengwei Pan, Hongming Dai, Gangming Zhao, Jinpeng Li, Xiao Zhang, Yizhou Yu

Abstract: Coronary microvascular disease constitutes a substantial risk to human health. Employing computer-aided analysis and diagnostic systems, medical professionals can intervene early in disease progression, with 3D vessel segmentation serving as a crucial component. Nevertheless, conventional U-Net architectures tend to yield incoherent and imprecise segmentation outcomes, particularly for small vesse… ▽ More Coronary microvascular disease constitutes a substantial risk to human health. Employing computer-aided analysis and diagnostic systems, medical professionals can intervene early in disease progression, with 3D vessel segmentation serving as a crucial component. Nevertheless, conventional U-Net architectures tend to yield incoherent and imprecise segmentation outcomes, particularly for small vessel structures. While models with attention mechanisms, such as Transformers and large convolutional kernels, demonstrate superior performance, their extensive computational demands during training and inference lead to increased time complexity. In this study, we leverage Fourier domain learning as a substitute for multi-scale convolutional kernels in 3D hierarchical segmentation models, which can reduce computational expenses while preserving global receptive fields within the network. Furthermore, a zero-parameter frequency domain fusion method is designed to improve the skip connections in U-Net architecture. Experimental results on a public dataset and an in-house dataset indicate that our novel Fourier transformation-based network achieves remarkable dice performance (84.37\% on ASACA500 and 80.32\% on ImageCAS) in tubular vessel segmentation tasks and substantially reduces computational requirements without compromising global receptive fields. △ Less

Submitted 11 January, 2024; originally announced January 2024.

BS-Diff: Effective Bone Suppression Using Conditional Diffusion Models from Chest X-Ray Images

Authors: Zhanghao Chen, Yifei Sun, Wenjian Qin, Ruiquan Ge, Cheng Pan, Wenming Deng, Zhou Liu, Wenwen Min, Ahmed Elazab, Xiang Wan, Changmiao Wang

Abstract: Chest X-rays (CXRs) are commonly utilized as a low-dose modality for lung screening. Nonetheless, the efficacy of CXRs is somewhat impeded, given that approximately 75% of the lung area overlaps with bone, which in turn hampers the detection and diagnosis of diseases. As a remedial measure, bone suppression techniques have been introduced. The current dual-energy subtraction imaging technique in t… ▽ More Chest X-rays (CXRs) are commonly utilized as a low-dose modality for lung screening. Nonetheless, the efficacy of CXRs is somewhat impeded, given that approximately 75% of the lung area overlaps with bone, which in turn hampers the detection and diagnosis of diseases. As a remedial measure, bone suppression techniques have been introduced. The current dual-energy subtraction imaging technique in the clinic requires costly equipment and subjects being exposed to high radiation. To circumvent these issues, deep learning-based image generation algorithms have been proposed. However, existing methods fall short in terms of producing high-quality images and capturing texture details, particularly with pulmonary vessels. To address these issues, this paper proposes a new bone suppression framework, termed BS-Diff, that comprises a conditional diffusion model equipped with a U-Net architecture and a simple enhancement module to incorporate an autoencoder. Our proposed network cannot only generate soft tissue images with a high bone suppression rate but also possesses the capability to capture fine image details. Additionally, we compiled the largest dataset since 2010, including data from 120 patients with high-definition, high-resolution paired CXRs and soft tissue images collected by our affiliated hospital. Extensive experiments, comparative analyses, ablation studies, and clinical evaluations indicate that the proposed BS-Diff outperforms several bone-suppression models across multiple metrics. Our code can be accessed at https://github.com/Benny0323/BS-Diff. △ Less

Submitted 28 February, 2024; v1 submitted 26 November, 2023; originally announced November 2023.

Comments: 5 pages, 2 figures, accepted by IEEE ISBI 2024

High-performance Power Allocation Strategies for Active IRS-aided Wireless Network

Authors: Yifan Zhao, Xuehui Wang, Yan Wang, Xianpeng Wang, Zhilin Chen, Feng Shu, Cunhua Pan, Jiangzhou Wang

Abstract: Due to its intrinsic ability to combat the double fading effect, the active intelligent reflective surface (IRS) becomes popular. The main feature of active IRS must be supplied by power, and the problem of how to allocate the total power between base station (BS) and IRS to fully explore the rate gain achieved by power allocation (PA) to remove the rate gap between existing PA strategies and opti… ▽ More Due to its intrinsic ability to combat the double fading effect, the active intelligent reflective surface (IRS) becomes popular. The main feature of active IRS must be supplied by power, and the problem of how to allocate the total power between base station (BS) and IRS to fully explore the rate gain achieved by power allocation (PA) to remove the rate gap between existing PA strategies and optimal exhaustive search (ES) arises naturally. First, the signal-to-noise ratio (SNR) expression is derived to be a function of PA factor beta [0, 1]. Then, to improve the rate performance of the conventional gradient ascent (GA), an equal-spacing-multiple-point-initialization GA (ESMPI-GA) method is proposed. Due to its slow linear convergence from iterative GA, the proposed ESMPI-GA is high-complexity. Eventually, to reduce this high complexity, a low-complexity closed-form PA method with third-order Taylor expansion (TTE) centered at point beta0 = 0.5 is proposed. Simulation results show that the proposed ESMPI-GA and TTE obviously outperform existing methods like equal PA. △ Less

Submitted 22 January, 2024; v1 submitted 7 November, 2023; originally announced November 2023.

Resource Allocation for RIS-Empowered Wireless Communications: Low-Complexity and Robust Designs

Authors: Ming Zeng, Wanming Hao, Zhangjie Peng, Zheng Chu, Xingwang Li, Changsheng You, Cunhua Pan

Abstract: This article delves into advancements in resource allocation techniques tailored for systems utilizing reconfigurable intelligent surfaces (RIS), with a primary focus on achieving low-complexity and resilient solutions. The investigation of low-complexity approaches for RIS holds significant relevance, primarily owing to the intricate characteristics inherent in RIS-based systems and the need of d… ▽ More This article delves into advancements in resource allocation techniques tailored for systems utilizing reconfigurable intelligent surfaces (RIS), with a primary focus on achieving low-complexity and resilient solutions. The investigation of low-complexity approaches for RIS holds significant relevance, primarily owing to the intricate characteristics inherent in RIS-based systems and the need of deploying large-scale RIS arrays. Concurrently, the exploration of robust solutions aims to address the issue of hardware impairments occurring at both the transceivers and RIS components in practical RIS-assisted systems. In the realm of both low-complexity and robust resource allocation, this article not only elucidates the fundamental techniques underpinning these methodologies but also offers comprehensive numerical results for illustrative purposes. The necessity of adopting resource allocation strategies that are both low in complexity and resilient is thoroughly established. Ultimately, this article provides prospective research avenues in the domain of low-complexity and robust resource allocation techniques tailored for RIS-assisted systems. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: submitted to IEEE WCM

FAS-assisted NOMA Short-Packet Communication Systems

Authors: Jianchao Zheng, Tuo Wu, Xiazhi Lai, Cunhua Pan, Maged Elkashlan, Kai-Kit Wong

Abstract: In this paper, we investigate a fluid antenna system (FAS)-assisted downlink non-orthogonal multiple access (NOMA) for short-packet communications. The base station (BS) adopts a single fixed antenna, while both the central user (CU) and the cell-edge user (CEU) are equipped with a FAS. Each FAS comprises $N$ flexible positions (also known as ports), linked to $N$ arbitrarily correlated Rayleigh f… ▽ More In this paper, we investigate a fluid antenna system (FAS)-assisted downlink non-orthogonal multiple access (NOMA) for short-packet communications. The base station (BS) adopts a single fixed antenna, while both the central user (CU) and the cell-edge user (CEU) are equipped with a FAS. Each FAS comprises $N$ flexible positions (also known as ports), linked to $N$ arbitrarily correlated Rayleigh fading channels. We derive expressions for the average block error rate (BLER) of the FAS-assisted NOMA system and provide asymptotic BLER expressions. We determine that the diversity order for CU and CEU is $N$, indicating that the system performance can be considerably improved by increasing $N$. Simulation results validate the great performance of FAS. △ Less

Submitted 22 October, 2023; originally announced October 2023.

Comments: Submitted to IEEE journal

Proactive Monitoring via Jamming in Fluid Antenna Systems

Authors: Junteng Yao, Tuo Wu, Xiazhi Lai, Ming Jin, Cunhua Pan, Maged Elkashlan, Kai-Kit Wong

Abstract: This paper investigates the efficacy of utilizing fluid antenna system (FAS) at a legitimate monitor to oversee suspicious communication. The monitor switches the antenna position to minimize its outage probability for enhancing the monitoring performance. Our objective is to maximize the average monitoring rate, whose expression involves the integral of the first-order Marcum $Q$ function. The op… ▽ More This paper investigates the efficacy of utilizing fluid antenna system (FAS) at a legitimate monitor to oversee suspicious communication. The monitor switches the antenna position to minimize its outage probability for enhancing the monitoring performance. Our objective is to maximize the average monitoring rate, whose expression involves the integral of the first-order Marcum $Q$ function. The optimization problem, as initially posed, is non-convex owing to its objective function. Nevertheless, upon substituting with an upper bound, we provide a theoretical foundation confirming the existence of a unique optimal solution for the modified problem, achievable efficiently by the bisection search method. Furthermore, we also introduce a locally closed-form optimal resolution for maximizing the average monitoring rate. Empirical evaluations confirm that the proposed schemes outperform conventional benchmarks considerably. △ Less

Submitted 11 October, 2023; originally announced October 2023.

Comments: 3 figs, submitted to IEEE journal

Parallel in-memory wireless computing

Authors: Cong Wang, Gong-Jie Ruan, Zai-Zheng Yang, Xing-Jian Yangdong, Yixiang Li, Liang Wu, Yingmeng Ge, Yichen Zhao, Chen Pan, Wei Wei, Li-Bo Wang, Bin Cheng, Zaichen Zhang, Chuan Zhang, Shi-Jun Liang, Feng Miao

Abstract: Parallel wireless digital communication with ultralow power consumption is critical for emerging edge technologies such as 5G and Internet of Things. However, the physical separation between digital computing units and analogue transmission units in traditional wireless technology leads to high power consumption. Here we report a parallel in-memory wireless computing scheme. The approach combines… ▽ More Parallel wireless digital communication with ultralow power consumption is critical for emerging edge technologies such as 5G and Internet of Things. However, the physical separation between digital computing units and analogue transmission units in traditional wireless technology leads to high power consumption. Here we report a parallel in-memory wireless computing scheme. The approach combines in-memory computing with wireless communication using memristive crossbar arrays. We show that the system can be used for the radio transmission of a binary stream of 480 bits with a bit error rate of 0. The in-memory wireless computing uses two orders of magnitude less power than conventional technology (based on digital-to-analogue and analogue-to-digital converters). We also show that the approach can be applied to acoustic and optical wireless communications △ Less

Submitted 30 September, 2023; originally announced October 2023.

Journal ref: Nat Electron 6, 381-389 (2023)

On Performance of Fluid Antenna System using Maximum Ratio Combining

Authors: Xiazhi Lai, Tuo Wu, Junteng Yao, Cunhua Pan, Maged Elkashlan, Kai-Kit Wong

Abstract: This letter investigates a fluid antenna system (FAS) where multiple ports can be activated for signal combining for enhanced receiver performance. Given $M$ ports at the FAS, the best $K$ ports out of the $M$ available ports are selected before maximum ratio combining (MRC) is used to combine the received signals from the selected ports. The aim of this letter is to study the achievable performan… ▽ More This letter investigates a fluid antenna system (FAS) where multiple ports can be activated for signal combining for enhanced receiver performance. Given $M$ ports at the FAS, the best $K$ ports out of the $M$ available ports are selected before maximum ratio combining (MRC) is used to combine the received signals from the selected ports. The aim of this letter is to study the achievable performance of FAS when more than one ports can be activated. We do so by analyzing the outage probability of this setup in Rayleigh fading channels through the utilization of Gauss-Chebyshev integration, lower bound estimation, and high signal-to-noise ratio (SNR) asymptotic approximations. Our analytical results demonstrate that FAS can harness rich spatial diversity, which is confirmed by computer simulations. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Comments: submitted to IEEE journal

An Anchor-Point Based Image-Model for Room Impulse Response Simulation with Directional Source Radiation and Sensor Directivity Patterns

Authors: Chao Pan, Lei Zhang, Yilong Lu, Jilu Jin, Lin Qiu, Jingdong Chen, Jacob Benesty

Abstract: The image model method has been widely used to simulate room impulse responses and the endeavor to adapt this method to different applications has also piqued great interest over the last few decades. This paper attempts to extend the image model method and develops an anchor-point-image-model (APIM) approach as a solution for simulating impulse responses by including both the source radiation and… ▽ More The image model method has been widely used to simulate room impulse responses and the endeavor to adapt this method to different applications has also piqued great interest over the last few decades. This paper attempts to extend the image model method and develops an anchor-point-image-model (APIM) approach as a solution for simulating impulse responses by including both the source radiation and sensor directivity patterns. To determine the orientations of all the virtual sources, anchor points are introduced to real sources, which subsequently lead to the determination of the orientations of the virtual sources. An algorithm is developed to generate room impulse responses with APIM by taking into account the directional pattern functions, factional time delays, as well as the computational complexity. The developed model and algorithms can be used in various acoustic problems to simulate room acoustics and improve and evaluate processing algorithms. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: 19 pages, 8 figures

Energy Minimization for Active RIS-Aided UAV-Enabled SWIPT Systems

Authors: Zhangjie Peng, Ruijing Liu, Cunhua Pan, Zhenkun Zhang, Jiangzhou Wang

Abstract: In this paper, we consider an active reconfigurable intelligent surface (RIS)-aided unmanned aerial vehicle(UAV)-enabled simultaneous wireless information and power transfer(SWIPT) system with multiple ground users. Compared with the conventional passive RIS, the active RIS deploying the internally integrated amplifiers can offset part of the multiplicative fading. In this system, we deal with an… ▽ More In this paper, we consider an active reconfigurable intelligent surface (RIS)-aided unmanned aerial vehicle(UAV)-enabled simultaneous wireless information and power transfer(SWIPT) system with multiple ground users. Compared with the conventional passive RIS, the active RIS deploying the internally integrated amplifiers can offset part of the multiplicative fading. In this system, we deal with an optimization problem of minimizing the total energy cost of the UAV. Specifically, we alternately optimize the trajectories, the hovering time, and the reflection vectors at the active RIS by using the successive convex approximation (SCA) method. Simulation results show that the active RIS performs better in energy saving than the conventional passive RIS. △ Less

Submitted 18 August, 2023; v1 submitted 16 June, 2023; originally announced June 2023.

Comments: Keywords:Reconfigurable intelligent surface (RIS), active RIS, unmanned aerial vehicle (UAV), simultaneous wireless information and power transfer (SWIPT), successive convex approximation (SCA)

Multi-User Matching and Resource Allocation in Vision Aided Communications

Authors: Weihua Xu, Feifei Gao, Yong Zhang, Chengkang Pan, Guangyi Liu

Abstract: Visual perception is an effective way to obtain the spatial characteristics of wireless channels and to reduce the overhead for communications system. A critical problem for the visual assistance is that the communications system needs to match the radio signal with the visual information of the corresponding user, i.e., to identify the visual user that corresponds to the target radio signal from… ▽ More Visual perception is an effective way to obtain the spatial characteristics of wireless channels and to reduce the overhead for communications system. A critical problem for the visual assistance is that the communications system needs to match the radio signal with the visual information of the corresponding user, i.e., to identify the visual user that corresponds to the target radio signal from all the environmental objects. In this paper, we propose a user matching method for environment with a variable number of objects. Specifically, we apply 3D detection to extract all the environmental objects from the images taken by multiple cameras. Then, we design a deep neural network (DNN) to estimate the location distribution of users by the images and beam pairs at multiple moments, and thereby identify the users from all the extracted environmental objects. Moreover, we present a resource allocation method based on the taken images to reduce the time and spectrum overhead compared to traditional resource allocation methods. Simulation results show that the proposed user matching method outperforms the existing methods, and the proposed resource allocation method can achieve $92\%$ transmission rate of the traditional resource allocation method but with the time and spectrum overhead significantly reduced. △ Less

Submitted 18 April, 2023; originally announced April 2023.

Comments: 34 pages, 21 figures

Two-Timescale Design for RIS-aided Cell-free Massive MIMO Systems with Imperfect CSI

Authors: Mahdi Eskandari, Kangda Zhi, Huiling Zhu, Cunhua Pan, Jiangzhou Wang

Abstract: The objective of this paper is to evaluate the effectiveness of a two-timescale transmission design in cell-free massive multi-input multiple-output (MIMO) systems incorporating reconfigurable intelligent surfaces (RISs) under the assumption of imperfect channel state information (CSI). We examine the Rician channel model and formulate the passive beamforming for the RISs based on statistical chan… ▽ More The objective of this paper is to evaluate the effectiveness of a two-timescale transmission design in cell-free massive multi-input multiple-output (MIMO) systems incorporating reconfigurable intelligent surfaces (RISs) under the assumption of imperfect channel state information (CSI). We examine the Rician channel model and formulate the passive beamforming for the RISs based on statistical channel state information (S-CSI). To that end, we put forth a linear minimum mean square error (LMMSE) estimator with the aim of estimating the aggregation of channels from the users to the APs within each channel coherence interval. Meanwhile, the active beamforming for the radio units (APs) is executed using the maximum ratio combining (MRC) approach, which utilizes the instantaneous aggregated channels, that result from the combination of the direct and reflected channels from the RISs. Subsequently, we derive the closed-form expressions of the achievable uplink spectral efficiency (SE), which is a function of S-CSI elements such as distance-dependent path loss, Rician factors as well as the number of RIS elements and AP antennas. We then optimize the phase shifts of the RISs to maximize the sum SE of the users, utilizing the soft actor-critic (SAC) which is a deep reinforcement learning (RL) method, and relying on the derived closed-form expressions. Numerical evaluations affirm that, despite the presence of imperfect CSI, the deployment of RIS in cell-free systems can lead to significant performance improvement. △ Less

Submitted 14 March, 2023; originally announced April 2023.

Performance Analysis and Low-Complexity Design for XL-MIMO with Near-Field Spatial Non-Stationarities

Authors: Kangda Zhi, Cunhua Pan, Hong Ren, Kok Keong Chai, Cheng-Xiang Wang, Robert Schober, Xiaohu You

Abstract: Extremely large-scale multiple-input multiple-output (XL-MIMO) is capable of supporting extremely high system capacities with large numbers of users. In this work, we build a framework for the analysis and low-complexity design of XL-MIMO in the near field with spatial non-stationarities. Specifically, we first analyze the theoretical performance of discrete-aperture XL-MIMO using an electromagnet… ▽ More Extremely large-scale multiple-input multiple-output (XL-MIMO) is capable of supporting extremely high system capacities with large numbers of users. In this work, we build a framework for the analysis and low-complexity design of XL-MIMO in the near field with spatial non-stationarities. Specifically, we first analyze the theoretical performance of discrete-aperture XL-MIMO using an electromagnetic (EM) channel model based on the near-field spherical wavefront. We analytically reveal the impact of the discrete aperture and polarization mismatch on the received power. We also complement the classical Fraunhofer distance based on the considered EM channel model. Our analytical results indicate that a limited part of the XL-array receives the majority of the signal power in the near field, which leads to a notion of visibility region (VR) of a user. Thus, we propose a VR detection algorithm and leverage the acquired VR information to devise a low-complexity symbol detection scheme. Furthermore, we propose a graph theory-based user partition algorithm, relying on the VR overlap ratio between different users. Partial zero-forcing (PZF) is utilized to eliminate only the interference from users allocated to the same group, which further reduces computational complexity in matrix inversion. Numerical results confirm the correctness of the analytical results and the effectiveness of the proposed algorithms. It reveals that our algorithms approach the performance of conventional whole array (WA)-based designs but with much lower complexity. △ Less

Submitted 12 October, 2023; v1 submitted 31 March, 2023; originally announced April 2023.

Comments: 18 pages. Accepted by IEEE JSAC

Adaptive control of dynamic networks

Authors: Chunyu Pan, Zhao Su, Haoyu Zheng, Changsheng Zhang, Weixiong Zhang, Xizhe Zhang

Abstract: Real-world network systems are inherently dynamic, with network topologies undergoing continuous changes over time. External control signals can be applied to a designated set of nodes within a network, known as the Minimum Driver Set (MDS), to steer the network from any state to a desired one. However, the efficacy of the incumbent MDS may diminish as the network topologies evolve. Previous resea… ▽ More Real-world network systems are inherently dynamic, with network topologies undergoing continuous changes over time. External control signals can be applied to a designated set of nodes within a network, known as the Minimum Driver Set (MDS), to steer the network from any state to a desired one. However, the efficacy of the incumbent MDS may diminish as the network topologies evolve. Previous research has often overlooked this challenge, assuming foreknowledge of future changes in network topologies. In reality, the evolution of network topologies is typically unpredictable, rendering the control of dynamic networks exceptionally challenging. Here, we introduce adaptive control - a novel approach to dynamically construct a series of MDSs to accommodate variations in network topology without prior knowledge. We present an efficient algorithm for adaptive control that minimizes adjustments to MDSs and overall control costs throughout the control period. Extensive experimental evaluation on synthetic and real dynamic networks demonstrated our algorithm's superior performance over several state-of-the-art methods. Adaptive control is general and broadly applicable to various applications in diverse fields. △ Less

Submitted 10 April, 2024; v1 submitted 19 February, 2023; originally announced February 2023.