-
Conformal Wide-Angle Scanning Leaky-Wave Antenna for V-Band On-Body Applications
Authors:
Pratik Vadher,
Zvonimir Sipus,
Anja K. Skrivervik,
Qihang Zeng,
Ronan Sauleau,
John S. Ho,
Giulia Sacco,
Denys Nikolayev
Abstract:
Wearable on-body millimeter-wave (mmWave) radars can provide obstacle detection and guidance for visually impaired people. However, their everyday performance is hindered by the rigid form factor and limited scanning range. In this article, we propose a low-profile, fast-scanning leaky-wave antenna (LWA) operating in the unlicensed V-band (57-64 GHz) to be integrated for on-body applications such…
▽ More
Wearable on-body millimeter-wave (mmWave) radars can provide obstacle detection and guidance for visually impaired people. However, their everyday performance is hindered by the rigid form factor and limited scanning range. In this article, we propose a low-profile, fast-scanning leaky-wave antenna (LWA) operating in the unlicensed V-band (57-64 GHz) to be integrated for on-body applications such as lightweight portable frequency-modulated continuous wave (FMCW) radars. The proposed LWA consists of meandering microstrips that can conform to the human body curvatures while maintaining beam-forming and beam-scanning properties. Experimental results demonstrate that the planar LWA achieves a realized gain above 10 dB with a fan-beam steering range in the H-plane from -40° to 43° over the operating frequency band while the half power beam-width (HPBW) is within 20°. Since for the foreseen application the antenna is supposed to conform to the user's body, the performance is also analyzed for a bent condition. The beam steering range changes to -32° to 50° when placed on the knee (corresponding to 80 mm radius). Under bending conditions, the LWA exhibits a maximum degradation of 1.75 dB, while the HPBW increases to 25°. This shows that due to the small size of the antenna, the impact of bending is low and the beam-forming and beam-scanning property of the designed LWA remain intact. Furthermore, we enable 2-D spatial scanning by employing an array of twelve LWAs with phased excitation, extending the scanning range in the E-plane from -40° to 40°, while the HPBW remains below 20° across the operational frequency range.
△ Less
Submitted 18 July, 2024;
originally announced July 2024.
-
Suitability of Common Ingestible Antennas for Multiplexed Gastrointestinal Biosensing
Authors:
Erdem Cil,
Icaro V. Soares,
Domitille Schanne,
Ronan Sauleau,
Denys Nikolayev
Abstract:
Ingestible sensor devices, which are increasingly used for internal health monitoring, rely on antennas to perform sensing functions and simultaneously to communicate with external devices. Despite the development of various ingestible antennas, there has been no comprehensive comparison of their performance as biosensors. This paper addresses this gap by examining and comparing the suitability of…
▽ More
Ingestible sensor devices, which are increasingly used for internal health monitoring, rely on antennas to perform sensing functions and simultaneously to communicate with external devices. Despite the development of various ingestible antennas, there has been no comprehensive comparison of their performance as biosensors. This paper addresses this gap by examining and comparing the suitability of three common types of ingestible antennas -- dipole, patch, and loop -- as biosensors for distinguishing gastrointestinal tissues (stomach, small intestine, and large intestine) based on their electromagnetic properties. The antennas studied in this work conform to the inner surface of biocompatible polylactic acid capsules with varying shell thicknesses and operate in the 433 MHz Industrial, Scientific, and Medical band. The comparison is performed in gastrointestinal tissues using several antenna parameters: 1) Sensing Capability: Changes in the phase of the reflection coefficient in the tissues are selected as the sensing parameter. 2) Robustness: The frequency interval (f_i) in which the antennas are matched (|S11| < -10 dB) in all the tissues and the maximum change in the center frequency (f_c) in different tissues are examined. 3) Radiation Performance: The gain and radiation efficiency of the antennas are examined. The effect of shell thickness on gain and radiation efficiency at 434 MHz is presented. Additionally, the radiation efficiency at various frequencies allocated for medical communications is compared with the theoretical maximum achievable efficiencies. These comprehensive data provide valuable information for making engineering decisions when designing multiplexed biosensor antennas for ingestible applications.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
A Miniature Non-Uniform Conformal Antenna Array Using Fast Synthesis for Wide-Scan UAV Application
Authors:
Yuanyan Su,
Icaro V. Soares,
Siegfred Daquioag Balon,
Jun Cao,
Denys Nikolayev,
Anja K. Skrivervik
Abstract:
To overcome the limited payload of lightweight vehicles such as unmanned aerial vehicle (UAV) and the aerodynamic constraints on the onboard radar, a compact nonuniform conformal array is proposed in order to achieve a wide beamscanning range and to reduce the sidelobes of the planar array. The non-uniform array consists of 7x4 elements where the inner two rows follow a geometric sequence while th…
▽ More
To overcome the limited payload of lightweight vehicles such as unmanned aerial vehicle (UAV) and the aerodynamic constraints on the onboard radar, a compact nonuniform conformal array is proposed in order to achieve a wide beamscanning range and to reduce the sidelobes of the planar array. The non-uniform array consists of 7x4 elements where the inner two rows follow a geometric sequence while the outer two rows follow an arithmetic sequence along the x axis. The element spacing along the y axis is gradient from the center as well. This geometry not only provides more degrees of freedom to optimize the array radiation, but also reduces the computation cost when synthesizing the excitation and the configuration of the array for a specific beam pattern. As field cancellation may happen due to the convex and concave features of the non-canonical UAV surface, a fast and low-cost in-house code to calculate the radiation pattern of a large scale conformal array for an arbitrary surface and element pattern is employed to optimize the array structure. As a proof of concept, the proposed array with a total volume of 142x93x40 mm3 is implemented at ISM band (5.8 GHz) using a miniature widebeam single-layer patch antenna with a dimension of 0.12lambdax0.12lambdax0.025lambda. By using the beamforming technique, an active onboard system is measured, which achieves the maximum gain of 21.8 dBi and a scanning range of >50deg and -28deg~28deg with a small scan loss of 2.2 and 0.5 dB in elevation and azimuth, respectively. Therefore, our design has high potential for wireless communication and sensing on UAV.
△ Less
Submitted 11 November, 2023;
originally announced December 2023.
-
Meandering microstrip leaky-wave antenna with dual-band linear-circular polarization and suppressed open stopband
Authors:
Pratik Vadher,
Giulia Sacco,
Denys Nikolayev
Abstract:
This paper proposes a dual-band frequency scanning meandering microstrip leaky-wave antenna with linear polarization in the Ku-band and circular polarization in the K-band. This is achieved by making use of two spatial harmonics for radiation. The unit cell of the periodic microstrip antenna contains three meanders with mitred corners. To ensure circular polarization, a theoretical formulation is…
▽ More
This paper proposes a dual-band frequency scanning meandering microstrip leaky-wave antenna with linear polarization in the Ku-band and circular polarization in the K-band. This is achieved by making use of two spatial harmonics for radiation. The unit cell of the periodic microstrip antenna contains three meanders with mitred corners. To ensure circular polarization, a theoretical formulation is developed taking into account the delay caused by microstrip length intervals. It defines the unit cell geometry by determining the length of the meanders to ensure that axial ratio remains below 3 dB throughout the operational band. Moreover, the meanders are used to provide better control over scanning rate (the ratio of change of angle of maximum radiation with frequency) and reduce spurious radiation of harmonics by ensuring single harmonic operation within the operational band. To guarantee continuous scanning through broadside direction, open stopband is suppressed using mitered angles. The antenna is designed on a 0.254-mm substrate making it suitable for conformal applications. The fabricated antenna shows a backward to forward beam steering range of 72 deg (-42 deg to 30 deg) in the K-band (19.4-27.5 GHz) with circular polarization and of 75 deg (-15 deg to 60 deg) in the Ku-band (11-15.5 GHz) with linear polarization.
△ Less
Submitted 7 February, 2024; v1 submitted 26 May, 2023;
originally announced May 2023.
-
On the use of impedance detuning for gastrointestinal segment tracking of ingestible capsules
Authors:
Erdem Cil,
Icaro V. Soares,
David Renaudeau,
Ronan Lucas,
Sema Dumanli,
Ronan Sauleau,
Denys Nikolayev
Abstract:
During their travel through the gastrointestinal tract, ingestible antennas encounter detuning in their impedance response due to varying electromagnetic properties of the surrounding tissues. This paper investigates the possibility of using this impedance detuning to detect in which segment of the gastrointestinal tract - stomach, small intestine, or large intestine - the capsule is located. Mean…
▽ More
During their travel through the gastrointestinal tract, ingestible antennas encounter detuning in their impedance response due to varying electromagnetic properties of the surrounding tissues. This paper investigates the possibility of using this impedance detuning to detect in which segment of the gastrointestinal tract - stomach, small intestine, or large intestine - the capsule is located. Meandered dipole antennas operating in the 433 MHz Industrial, Scientific, and Medical Band are designed for this purpose. The antennas conform to the inner surface of 3D-printed polylactic-acid capsules with a shell thickness of 0.6 or 0.4 mm. The impedance response is first optimized numerically in a homogeneous cylindrical phantom with time-averaged electromagnetic properties. The magnitude and the phase of the reflection coefficient are then obtained in different tissues and compared with simulations and measurements. The experimental demonstration is carried out first using tissue-mimicking liquids and then in a recently deceased ex vivo porcine model. The minimum change in the phase between different gastrointestinal tissues was determined to be around 10 degrees in the porcine model, indicating that the changes in the impedance response, particularly the changes in the phase, provide sufficient information to follow the position of the capsule in the gastrointestinal tract.
△ Less
Submitted 9 December, 2022; v1 submitted 16 July, 2022;
originally announced July 2022.
