Showing 1–15 of 15 results for author: You, Z

Nonreciprocal interactions drive capillary waves in active liquid crystals

Authors: Paarth Gulati, Fernando Caballero, Itamar Kolvin, Zhihong You, M. Cristina Marchetti

Abstract: Active liquid crystals exert nonequilibrium stresses on their surroundings through constant consumption of energy, giving rise to dynamical steady states not present in equilibrium. The paradigmatic example of an active liquid crystal is a suspension of microtubule bundles powered by kinesin motor proteins, which exhibits self-sustained spatiotemporal chaotic flows. This system has been modelled u… ▽ More Active liquid crystals exert nonequilibrium stresses on their surroundings through constant consumption of energy, giving rise to dynamical steady states not present in equilibrium. The paradigmatic example of an active liquid crystal is a suspension of microtubule bundles powered by kinesin motor proteins, which exhibits self-sustained spatiotemporal chaotic flows. This system has been modelled using continuum theories that couple the microtubule orientation to active flows. Recently the focus has shifted to the interfacial properties of mixtures of active liquid crystals and passive fluids. Active/passive interfaces have been shown to support propagating capillary waves in the absence of inertia and offer a promising route for relating experimental parameters to those of the continuum theory. In this paper we report the derivation of a minimal model that captures the linear dynamics of the interface between an active liquid crystal and a passive fluid. We show that the dynamics of the interface, although powered by active flows throughout the bulk, is qualitatively captured by equations that couple non-reciprocally interface height and nematic director at the interface. This minimal model reproduces the dynamical structure factor evaluated from numerical simulations and the qualitative form of the wave dispersion relation seen in experiments. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Comments: 14 pages, 7 figures

Manipulating liquid-liquid phase separation using patterned flow

Authors: Yulin Li, Tong Zhou, Yanyu Li, Qi Zhang, Zhihong You

Abstract: The precise control of liquid-liquid phase separation (LLPS) is the key to developing cutting-edge technologies that benefit diverse disciplines. Fluid flow was found to be capable of controlling the structure and effective temperature of LLPS, but the extent and precision of control were less than optimal. In this article, we propose that patterned flow can be employed as a generic tool to manipu… ▽ More The precise control of liquid-liquid phase separation (LLPS) is the key to developing cutting-edge technologies that benefit diverse disciplines. Fluid flow was found to be capable of controlling the structure and effective temperature of LLPS, but the extent and precision of control were less than optimal. In this article, we propose that patterned flow can be employed as a generic tool to manipulate LLPS effectively. By combining theoretical modeling and numerical simulations, we demonstrate that flows with tailor-made structures can become functional, allowing us to control diverse aspects of LLPS. Typical examples include the capture and pinning of droplets, fine-tuning of droplet sizes, forced assembly of periodic droplet arrays, and the remodeling of the kinetics and structure of phase separation. These manipulations are grounded on the redistribution of chemical potential by the structured flow. Our results not only can lead to potential LLPS-based technologies, but also highlight the rich behavior of LLPS introduced by the patterned flow. △ Less

Submitted 2 July, 2024; originally announced July 2024.

Comments: 6 pages and 3 figures

Vacancies making jerky flow in complex alloys

Authors: Zhida Liang, Fengxian Liu, Li Wang, Zihan You, Fanqi Zhong, Alan Cocks, Florian Pyczak

Abstract: Longevity of materials, especially alloys, is crucial for enhancing the sustainability and efficiency of various applications, including gas turbines. Jerky flow, also known as dynamic strain aging effect, can indeed have a significant impact on the fatigue life of high-temperature components in gas turbines. In general, three jerky flow types, i.e., A, B and C, existed in superalloys. Type A and… ▽ More Longevity of materials, especially alloys, is crucial for enhancing the sustainability and efficiency of various applications, including gas turbines. Jerky flow, also known as dynamic strain aging effect, can indeed have a significant impact on the fatigue life of high-temperature components in gas turbines. In general, three jerky flow types, i.e., A, B and C, existed in superalloys. Type A and B, occurring at low temperature, were proved to be caused by interstitial elements, such as carbon. However, Type C serration at high temperature has not been verified directly and remains unresolved, which was unanimously agreed it is caused by the interaction between solute elements and dislocations. In this study, our new discovery challenged this mainstream axiom. We proposed that vacancies play a dominant role in inducing jerky flow instead of solute atoms. By transmission electron microscopy, we observed directly that dislocations are pinned by vacancy-type dislocation loops (PDLs) or dipoles. Our findings suggest that vacancies located at dislocation jogs are primarily responsible for pinning and unpinning of superlattice dislocations. As dislocations move and interact with vacancies, PDLs or dipoles are left behind in their path. This pinning and unpinning process is repeated as successive dislocations encounter the newly formed PDLs or dipoles, leading to the recurring fluctuations in the stress, i.e., serrated flow. Additionally, antisite defects created by Co, Cr and Ti sitting on Ni positions is postulated to facilitate vacancy formation and migration towards dislocations via nearest neighbor jumps. This study provides a new avenue to show how future alloy design can improve the fatigue life of superalloys in extreme environments. △ Less

Submitted 5 May, 2024; originally announced May 2024.

Vorticity phase separation and defect lattices in the isotropic phase of active liquid crystals

Authors: Fernando Caballero, Zhihong You, M. Cristina Marchetti

Abstract: We use numerical simulations and linear stability analysis to study the dynamics of an active liquid crystal film on a substrate in the regime where the passive system would be isotropic. Extensile activity builds up local orientational order and destabilizes the quiescent isotropic state above a critical activity value, eventually resulting in spatiotemporal chaotic dynamics akin to the one obser… ▽ More We use numerical simulations and linear stability analysis to study the dynamics of an active liquid crystal film on a substrate in the regime where the passive system would be isotropic. Extensile activity builds up local orientational order and destabilizes the quiescent isotropic state above a critical activity value, eventually resulting in spatiotemporal chaotic dynamics akin to the one observed ubiquitously in the nematic state. Here we show that tuning substrate friction yields a variety of emergent structures at intermediate activity, including lattices of flow vortices with associated regular arrangements of topological defects and a new state where flow vortices trap pairs of $+1/2$ defect that chase each other tail. These chiral units spontaneously pick the sense of rotation and organize in a hexagonal lattice, surrounded by a diffuse flow of opposite rotation to maintain zero net vorticity. The length scale of these emergent structures is set by the screening length $l_η=\sqrt{η/Γ}$ of the flow, controlled by the shear viscosity $η$ and the substrate friction $Γ$, and can be captured by simple mode selection of the vortical flows. We demonstrate that the emergence of coherent structures can be interpreted as a phase separation of vorticity, where friction plays a role akin to that of birth/death processes in breaking conservation of the phase separating species and selecting a characteristic scale for the patterns. Our work shows that friction provides an experimentally accessible tuning parameter for designing controlled active flows. △ Less

Submitted 22 September, 2023; v1 submitted 7 June, 2023; originally announced June 2023.

Spontaneous stable rotation of flocking flexible active matter

Authors: Gaoxiao Jiang, Zhihong You, Rui Ma, Chen-Xu Wu

Abstract: In nature, active matter, such as worms or dogs, tend to spontaneously form a stable rotational cluster when they flock to the same food source on an unregulated and unconfined surface. {In this paper we present an $n$-node flexible active matter model to study the collective motion due to the flocking of individual agents on a two-dimensional surface, and confirm that there exists a spontaneous s… ▽ More In nature, active matter, such as worms or dogs, tend to spontaneously form a stable rotational cluster when they flock to the same food source on an unregulated and unconfined surface. {In this paper we present an $n$-node flexible active matter model to study the collective motion due to the flocking of individual agents on a two-dimensional surface, and confirm that there exists a spontaneous stable cluster rotation synchronizing with a chirality produced by the alignment of their bodies under the impetus of the active force.} A prefactor of 1.86 is obtained for the linear relationship between normalized angular velocity and chirality. The angular velocity of such a rotation is found to be dependent on the individual flexibility, the number of nodes in each individual, and the magnitude of the active force. The conclusions well explain the spontaneous stable rotation of clusters that exists in many flexible active matter, like worms or {dogs}, when they flock to the same single source. △ Less

Submitted 16 August, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Large-Scale Integrated Flexible Tactile Sensor Array for Sensitive Smart Robotic Touch

Authors: Zhenxuan Zhao, Jianshi Tang, Jian Yuan, Yijun Li, Yuan Dai, Jian Yao, Qingtian Zhang, Sanchuan Ding, Tingyu Li, Ruirui Zhang, Yu Zheng, Zhengyou Zhang, Song Qiu, Qingwen Li, Bin Gao, Ning Deng, He Qian, Fei Xing, Zheng You, Huaqiang Wu

Abstract: In the long pursuit of smart robotics, it has been envisioned to empower robots with human-like senses, especially vision and touch. While tremendous progress has been made in image sensors and computer vision over the past decades, the tactile sense abilities are lagging behind due to the lack of large-scale flexible tactile sensor array with high sensitivity, high spatial resolution, and fast re… ▽ More In the long pursuit of smart robotics, it has been envisioned to empower robots with human-like senses, especially vision and touch. While tremendous progress has been made in image sensors and computer vision over the past decades, the tactile sense abilities are lagging behind due to the lack of large-scale flexible tactile sensor array with high sensitivity, high spatial resolution, and fast response. In this work, we have demonstrated a 64x64 flexible tactile sensor array with a record-high spatial resolution of 0.9 mm (equivalently 28.2 pixels per inch), by integrating a high-performance piezoresistive film (PRF) with a large-area active matrix of carbon nanotube thin-film transistors. PRF with self-formed microstructures exhibited high pressure-sensitivity of ~385 kPa-1 for MWCNTs concentration of 6%, while the 14% one exhibited fast response time of ~3 ms, good linearity, broad detection range beyond 1400 kPa, and excellent cyclability over 3000 cycles. Using this fully integrated tactile sensor array, the footprint maps of an artificial honeybee were clearly identified. Furthermore, we hardware-implemented a smart tactile system by integrating the PRF-based sensor array with a memristor-based computing-in-memory chip to record and recognize handwritten digits and Chinese calligraphy, achieving high classification accuracies of 98.8% and 97.3% in hardware, respectively. The integration of sensor networks with deep learning hardware may enable edge or near-sensor computing with significantly reduced power consumption and latency. Our work could pave the road to building large-scale intelligent sensor networks for next-generation smart robotics. △ Less

Submitted 3 November, 2022; v1 submitted 23 August, 2022; originally announced August 2022.

Comments: Correction in Methods: The weight ratio of TPU:DMF was set to be 1:5

Journal ref: ACS Nano 2022, 16, 16784

Dynamics of active liquid interfaces

Authors: Raymond Adkins, Itamar Kolvin, Zhihong You, Sven Witthaus, M. Cristina Marchetti, Zvonimir Dogic

Abstract: Controlling interfaces of phase separating fluid mixtures is key to creating diverse functional soft materials. Traditionally, this is accomplished with surface-modifying chemical agents. Using experiment and theory, we study how mechanical activity shapes soft interfaces that separate an active and a passive fluid. Chaotic flows in the active fluid give rise to giant interfacial fluctuations and… ▽ More Controlling interfaces of phase separating fluid mixtures is key to creating diverse functional soft materials. Traditionally, this is accomplished with surface-modifying chemical agents. Using experiment and theory, we study how mechanical activity shapes soft interfaces that separate an active and a passive fluid. Chaotic flows in the active fluid give rise to giant interfacial fluctuations and non-inertial propagating active waves. At high activities, stresses disrupt interface continuity and drive droplet generation, producing an emulsion-like active state comprised of finite-sized droplets. When in contact with a solid boundary, active interfaces exhibit non-equilibrium wetting transitions, wherein the fluid climbs the wall against gravity. These results demonstrate the promise of mechanically driven interfaces for creating a new class of soft active matter. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Comments: 62 pages, 5 figures, 13 supplementary figures

Journal ref: Science, 11 Aug 2022, Vol 377, Issue 6607 pp. 768-772

Active nematic defects in compressible and incompressible flows

Authors: Supavit Pokawanvit, Zhitao Chen, Zhihong You, Luiza Angheluta, M. Cristina Marchetti, Mark J. Bowick

Abstract: We study the dynamics of active nematic films on a substrate driven by active flows with or without the incompressible constraint.Through simulations and theoretical analysis, we show that arch patterns are stable in the compressible case, whilst they become unstable under the incompressibility constraint. For compressible flows at high enough activity, stable arches organize themselves into a sme… ▽ More We study the dynamics of active nematic films on a substrate driven by active flows with or without the incompressible constraint.Through simulations and theoretical analysis, we show that arch patterns are stable in the compressible case, whilst they become unstable under the incompressibility constraint. For compressible flows at high enough activity, stable arches organize themselves into a smectic-like pattern, which induce an associated global polar ordering of $+1/2$ nematic defects. By contrast, divergence-free flows give rise to a local nematic order of the $+1/2$ defects, consisting of anti-aligned pairs of neighboring defects, as established in previous studies. △ Less

Submitted 28 October, 2022; v1 submitted 27 June, 2022; originally announced June 2022.

Comments: 10 pages, 4 figures

A Modular Origami-inspired Mechanical Metamaterial

Authors: Yunfang Yang, Zhong You

Abstract: Mechanical metamaterials with complex microstructures have superior physical properties such as graded stiffness, negative Poisson's ratio, and advantage in energy absorption. In recent years, origami provide many inspirations in the geometry structure of the metamaterials. Here we present a modular origami inspired reconfigurable metamaterial. Our approach exploits a transformable module consiste… ▽ More Mechanical metamaterials with complex microstructures have superior physical properties such as graded stiffness, negative Poisson's ratio, and advantage in energy absorption. In recent years, origami provide many inspirations in the geometry structure of the metamaterials. Here we present a modular origami inspired reconfigurable metamaterial. Our approach exploits a transformable module consisted of the Sarrus linkage and planar four-bar linkage, and the modules are connected following a tessellation pattern to form a periodic structure. Different arrangements, module shapes and grid pattern of the metamaterial are discussed, and the loading capacity and stiffness variation are analysed experimentally. The proposed material can be used to realize reconfigurable structures or architectures over a wide range of length scales. △ Less

Submitted 17 December, 2020; originally announced December 2020.

Journal ref: Proceeding of the 7th International Meeting on Origami in Science, Mathematics and Education (2018)

Nonreciprocity as a generic route to traveling states

Authors: Zhihong You, Aparna Baskaran, M. Cristina Marchetti

Abstract: We examine a non-reciprocally coupled dynamical model of a mixture of two diffusing species. We demonstrate that nonreciprocity, which is encoded in the model via antagonistic cross diffusivities, provides a generic mechanism for the emergence of traveling patterns in purely diffusive systems with conservative dynamics. In the absence of non-reciprocity, the binary fluid mixture undergoes a phase… ▽ More We examine a non-reciprocally coupled dynamical model of a mixture of two diffusing species. We demonstrate that nonreciprocity, which is encoded in the model via antagonistic cross diffusivities, provides a generic mechanism for the emergence of traveling patterns in purely diffusive systems with conservative dynamics. In the absence of non-reciprocity, the binary fluid mixture undergoes a phase transition from a homogeneous mixed state to a demixed state with spatially separated regions rich in one of the two components. Above a critical value of the parameter tuning non-reciprocity, the static demixed pattern acquires a finite velocity, resulting in a state that breaks both spatial and time translational symmetry, as well as the reflection parity of the static pattern. We elucidate the generic nature of the transition to traveling patterns using a minimal model that can be studied analytically. Our work has direct relevance to nonequilibrium assembly in mixtures of chemically interacting colloids that are known to exhibit non-reciprocal effective interactions, as well as to mixtures of active and passive agents where traveling states of the type predicted here have been observed in simulations. It also provides insight on transitions to traveling and oscillatory states seen in a broad range of nonreciprocal systems with non-conservative dynamics, from reaction-diffusion and prey-predators models to multispecies mixtures of microorganisms with antagonistic interactions. △ Less

Submitted 20 August, 2020; v1 submitted 15 May, 2020; originally announced May 2020.

Comments: 8 pages, 3 figures

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 117(33), 19767 (2020)

Confinement-induced self-organization in growing bacterial colonies

Authors: Zhihong You, Daniel J. G. Pearce, Luca Giomi

Abstract: We investigate the emergence of global alignment in colonies of dividing rod-shaped cells under confinement. Using molecular dynamics simulations and continuous modeling, we demonstrate that geometrical anisotropies in the confining environment give rise to imbalance in the normal stresses, which, in turn, drives a collective rearrangement of the cells. This behavior crucially relies on the colony… ▽ More We investigate the emergence of global alignment in colonies of dividing rod-shaped cells under confinement. Using molecular dynamics simulations and continuous modeling, we demonstrate that geometrical anisotropies in the confining environment give rise to imbalance in the normal stresses, which, in turn, drives a collective rearrangement of the cells. This behavior crucially relies on the colony's solid-like mechanical response at short time scales and can be recovered within the framework of active hydrodynamics upon modeling bacterial colonies as growing viscoelastic gels characterized by Maxwell-like stress relaxation. △ Less

Submitted 22 January, 2021; v1 submitted 30 April, 2020; originally announced April 2020.

Comments: 10 pages, 8 figures

Journal ref: Sci. Adv. 7(4), eabc8685 (2021)

A new theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers

Authors: Chuanyang Jiang, Yanying Zhu, Kaixuan Guo, Qing Li, Zhengwei You, Jiao Yu

Abstract: Bioelastomers have demonstrated tremendous value and potential in the field of tissue repair due to increasing health demands. Improved non-invasive methods are required for monitoring tissue development assisted by bioelastomers. In this paper, we present a novel theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers… ▽ More Bioelastomers have demonstrated tremendous value and potential in the field of tissue repair due to increasing health demands. Improved non-invasive methods are required for monitoring tissue development assisted by bioelastomers. In this paper, we present a novel theory of fluid-solid coupling in a porous medium for application to the ultrasonic evaluation of tissue remodeling using bioelastomers. The common assumption of equal solid and liquid displacements used in the conventional description of a fluid-saturated porous solid cannot be applied to soft media, such as bioelastomers. We revise the geoacoustic theory of Biot to allow for relative motion between a fluid and a solid in an aggregate and derive an expression for a characteristic fluid-solid coupling parameter. Unlike the conventional method, the propagation speed of shear waves observed by ultrasound shear wave elastography is considered a known quantity in the novel theory, and the calculated value of the coupling parameter is used to evaluate the status of tissue repair. The model is validated by analyzing selected cases. The conditions under which the model can be applied are identified. However, further development of the theory is required to extract dynamic parameters that can be used to monitor the entire tissue remodeling process. In this paper, a theoretical approach is developed that can be used to analyze the mechanics of tissue repair. The theory has potential applications in the field of acellular in situ tissue engineering for non-invasive monitoring of the complex mechanical remodeling process of tissue regeneration and bioelastomer degradation. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Mono-to-multilayer transition in growing bacterial colonies

Authors: Zhihong You, Daniel J. G. Pearce, Anupam Sengupta, Luca Giomi

Abstract: The transition from monolayers to multilayered structures in bacterial colonies is a fundamental step in biofilm development. Observed across different morphotypes and species, this transition is triggered within freely growing bacterial microcolonies comprising a few hundred cells. Using a combination of numerical simulations and analytical modeling, here we demonstrate that this transition origi… ▽ More The transition from monolayers to multilayered structures in bacterial colonies is a fundamental step in biofilm development. Observed across different morphotypes and species, this transition is triggered within freely growing bacterial microcolonies comprising a few hundred cells. Using a combination of numerical simulations and analytical modeling, here we demonstrate that this transition originates from the competition between growth-induced in-plane active stresses and vertical restoring forces, due to the cell-substrate interactions. Using a simple chainlike colony of laterally confined cells, we show that the transition sets when individual cells become unstable to rotations, thus it is localized and mechanically deterministic. Asynchronous cell division renders the process stochastic, so that all the critical parameters that control the onset of the transition are continuously distributed random variables. Here we demonstrate that the occurrence of the first division in the colony can be approximated as a Poisson process in the limit of large cells numbers. This allows us to approximately calculate the probability distribution function of the position and time associated with the first extrusion. The rate of such a Poisson process can be identified as the order parameter of the transition, thus highlighting its mixed deterministic-stochastic nature. △ Less

Submitted 13 March, 2021; v1 submitted 21 November, 2018; originally announced November 2018.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 123, 178001 (2019)

Statistical Properties of Autonomous Flows in 2D Active Nematics

Authors: Linnea M Lemma, Stephen J Decamp, Zhihong You, Luca Giomi, Zvonimir Dogic

Abstract: We study the dynamics of a tunable 2D active nematic liquid crystal composed of microtubules and kinesin motors confined to an oil-water interface. Kinesin motors continuously inject mechanical energy into the system through ATP hydrolysis, powering the relative microscopic sliding of adjacent microtubules, which in turn generates macroscale autonomous flows and chaotic dynamics. We use particle i… ▽ More We study the dynamics of a tunable 2D active nematic liquid crystal composed of microtubules and kinesin motors confined to an oil-water interface. Kinesin motors continuously inject mechanical energy into the system through ATP hydrolysis, powering the relative microscopic sliding of adjacent microtubules, which in turn generates macroscale autonomous flows and chaotic dynamics. We use particle image velocimetry to quantify two-dimensional flows of active nematics and extract their statistical properties. In agreement with the hydrodynamic theory, we find that the vortex areas comprising the chaotic flows are exponentially distributed, which allows us to extract the characteristic system length scale. We probe the dependence of this length scale on the ATP concentration, which is the experimental knob that tunes the magnitude of the active stress. Our data suggest a possible mapping between the ATP concentration and the active stress that is based on the Michaelis-Menten kinetics that governs motion of individual kinesin motors. △ Less

Submitted 8 September, 2019; v1 submitted 18 September, 2018; originally announced September 2018.

Comments: 17 pages, 7 figures

Journal ref: Soft Matter 15, 3264-3271 (2019)

Geometry and mechanics of microdomains in growing bacterial colonies

Authors: Zhihong You, Daniel J. G. Pearce, Anupam Sengupta, Luca Giomi

Abstract: Bacterial colonies are abundant on living and nonliving surfaces and are known to mediate a broad range of processes in ecology, medicine, and industry. Although extensively researched, from single cells to demographic scales, a comprehensive biomechanical picture, highlighting the cell-to-colony dynamics, is still lacking. Here, using molecular dynamics simulations and continuous modeling, we inv… ▽ More Bacterial colonies are abundant on living and nonliving surfaces and are known to mediate a broad range of processes in ecology, medicine, and industry. Although extensively researched, from single cells to demographic scales, a comprehensive biomechanical picture, highlighting the cell-to-colony dynamics, is still lacking. Here, using molecular dynamics simulations and continuous modeling, we investigate the geometrical and mechanical properties of a bacterial colony growing on a substrate with a free boundary and demonstrate that such an expanding colony self-organizes into a "mosaic" of microdomains consisting of highly aligned cells. The emergence of microdomains is mediated by two competing forces: the steric forces between neighboring cells, which favor cell alignment, and the extensile stresses due to cell growth that tend to reduce the local orientational order and thereby distort the system. This interplay results in an exponential distribution of the domain areas and sets a characteristic length scale proportional to the square root of the ratio between the system orientational stiffness and the magnitude of the extensile active stress. Our theoretical predictions are finally compared with experiments with freely growing E. coli microcolonies, finding quantitative agreement. △ Less

Submitted 13 September, 2018; v1 submitted 13 March, 2017; originally announced March 2017.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. X 8, 031065 (2018)