All Questions
82
questions
0
votes
0
answers
8
views
Detecting array message
I found an old PC back from 2005. Tried to boot it up but it gave a message "Detecting array". Also tried dissabling SATA controller in BIOS but then a simple white line was blinking on the ...
1
vote
0
answers
266
views
Rebuilding Windows Server 2019 Boot
I have a Windows 2019 Server that has been in service for about 8 months. It is an MSI 670P motherboard and implements a RAID10. It won't boot. Apparently there was a power failure, and the system ...
-3
votes
6
answers
533
views
Repairing Windows installation that can't boot
Background:
I have an Asus UX51VZ that will no longer boot into Windows. This was my dad's primary computer. I took it to a computer shop so they could fix the fans that came on at full speed all the ...
0
votes
2
answers
190
views
System no longer bootable: promise_fasttrack_raid_member
After a simple reboot on my home desktop, I received the following message:
Non-System disk or disk error
replace and strike any key when ready
Plugging a Debian live usb, I could check the following ...
0
votes
1
answer
257
views
Raid 1 LV partially up and unable to repair, the down rimage is missing
I run a lvm raid1 on my old computer.
pv: /dev/sda1 sdb1 sdc1
vg: myvg
lv: myvg/debian
The root partiion is myvg/debian, it is a raid1 on sdb1 and sdc1.
(lvcreate --type raid1 -L 6G --name debian ...
0
votes
1
answer
88
views
Trying to rehabilitate an old PC, encountering RAID error
I have a computer that I aim to turn into a server, but I am running into an error where I can't even reach the BIOS setup screen.
Summary.
Trying to boot PC, encounter error:
Detecting arrays ...
No ...
0
votes
0
answers
632
views
Desktop PC with RAID won't boot
I'm trying to fix my dads PC (Windows 10) being on holiday at my parents place. He has a RAID Volume installed, built of 2 SATA discs where at least one disk seems to be corrupt - it makes an ugly ...
0
votes
0
answers
1k
views
PC needs to reset bios every time it starts
EVERY TIME I start my custom built PC this appears. I have no clue at all but it may have something to do with a win11 update.
To boot into windows, I'll have to go into bios by F1, load my saved ...
0
votes
0
answers
154
views
Ubuntu 18 partition error
I'm new on Linux, just created VROC NVMe RAID1 and installed Ubuntu 18.04.3 on it. Then noticed that lsblk gives an error: "GPT PMBR size mismatch (1781612543 != 1875385007) will be corrected by ...
0
votes
0
answers
677
views
How to migrate primary system drive from RAID array to SSD with Windows already installed?
I currently have an SSD (C:) with Windows 10 installed on it (C:/Windows/*). I also have a RAID 1+0 array of 4 HDDs (D:) that does not have an OS installed. I would like to remove the RAID (D:) ...
0
votes
0
answers
113
views
PCIE SSD Raid0 not bootable but everything is OK on it
I have a MSI GT72S 6QE laptop where the OS (Windows 10) is installed on a PCIE RAID0 SSD (I know, Raid0 sucks, I won't make that mistake again when buying a laptop).
On of the two SSD's in the RAID ...
0
votes
1
answer
7k
views
Changed from AHCI to RAID and now Windows won't boot
I've got 2 SSDs, one for Windows and one for Linux Mint. I have another 4 HDDs I turned into a RAID 0 array via my BIOS. Mobo is ASUS TUF X570.
I had the 4 HDDs in a Microsoft storage pool but started ...
0
votes
0
answers
262
views
Issues while installing Windows 10 Pro on asus x99-e ws with raid 1 setup
I have this PC im trying to install Windows pro 64bit on this setup but im totally stuck cause of many problems. Here's some specifications:
Supply - Corsair HX750i
MB - Asus X99-E WS
CPU - Intel ...
1
vote
0
answers
139
views
Can't clone my old Windows 10 system to RAID 0 in new build
Going crazy trying to get my new build to boot. I need to restore my old system from an external usb drive to a RAID 0 created in the new motherboard bios. I’ve updated the raid drivers in Windows ...
0
votes
1
answer
244
views
Redhat Linux DM-0 reported xfs in memory data corruption after it is cloned to run on another machine
I have Redhat Linux system running HA, with DRBD, and logical Raiding enabled on 4 drives.
Namely sda/sdb/sdc/sdd.
sda/sdb are the HA drives with XFS.
sdc/sdd are the OS drives with XFS.
I cloned the ...
1
vote
2
answers
463
views
PCI-E RAID Card prevents boot (fans on, no display)
RAID Card: LSI SAS 9240-8i (FW:P20 9211-8I IT Mode)
Computer: Intel DQ67OW, i7 2600K, 16GB RAM
Really peculiar fault... When I install the RAID card and start up the computer, I can hear the fans turn ...
1
vote
2
answers
1k
views
Rufus accidently used on a hard disk, now a whole raid box has been wiped
This is possibly a question for Akeo, the author of Rufus.
My problem is that I was using Rufus to format a USB drive, and I did something wrong. Now a whole ICY BOX RAID box (configured as RAID 5 ...
0
votes
1
answer
95
views
Drive suddenly out of RAID 0 group
I have 3 disks grouped in a RAID 0 array.
For a reasons unknown, the RAID configurator sees 2 disks in the group. The 3rd is listed as a normal drive.
Windows will not boot since
it detects an error.
...
0
votes
1
answer
228
views
How can I have a raid and a separate OS drive on server
I am working on re-purposing a server for a pet project. The server has 3 HDDs and 1 SDD. I would like the 3 HDDS to be RAID0 and then install the OS on the SDD.
I'm running into an issue where we ...
1
vote
3
answers
3k
views
Windows 10 Pro - Very Slow Bootup // Here's My :: Windows Performance ToolKit (ETL) File
PROBLEM
I installed a FRESH copy of Windows 10 Pro onto my formatted SSD RAID0 drive. This is not an Upgrade from an older OS. Each time on startup (not from SLEEP but actual full startup / restart)...
0
votes
1
answer
73
views
Why Windows 7 will not install when using Marvell MST644R HyperDuo?
I recently wanted to upgrade my desktop by adding a VANTEC (Marvell) UGT-MST644R (2mSATA + 2SATA) Raid card with HyperDuo capability. I also purchased two 240Gb SSD cards that fit directly on the ...
2
votes
1
answer
2k
views
Can Windows Server 2012 R2 be installed onto M.2 SSD drive?
I'm about to build a server machine based on XEON E-2246G placed most probably into ASUS WS C246 PRO and I want to have a M.2 SSD drive as primary for the OS Windows Server 2012 R2. The M.2 SSD disk (...
3
votes
1
answer
2k
views
No Boot Device Found after installing Ubuntu
I have a Dell Precision T7910 Workstation with a MegaRAID SAS 9361-8i,
with one Virtual Drive of RAID 0 (one HDD of 512 Gb) and another Virtual Drive of RAID 45 (3 HDDs of 4To).
With the Ubuntu ...
0
votes
0
answers
783
views
Very slow bootup time after adding SSD - Windows 10
I wanted to increase the speed of my DLL PC so added a new 120 GB SSD hard disk in addition to the previously present hard disk, system boot up time became very slow.
It is litreally stuck at bios ...
1
vote
0
answers
918
views
Booting Windows from VROC RAID
I installed Windows (tried server 2019 as well as 2016) on a Intel VROC RAID0 Raid (VROC seems to be the only RAID option my SuperMicro X11Dai-N offers). During installation, I had to load the VROC ...
1
vote
1
answer
3k
views
RAID-0 SSD failure: I/O error, err_mask=0x4
Set up
I have an ASUS UX301LA-DE022H. It contains two SSD SanDisk SD6SP1M-256G-1102, 256G each, configured as an Intel Firmware RAID 0 (a.k.a. fake RAID).
What happened
I was using Windows normally....
2
votes
1
answer
786
views
I want to place boot on USB and boot RAID
I have a Linux software RAID5 involving four disks (mdadm).
Here is my lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 5.5T 0 disk
├─sda1 8:1 0 953M 0 ...
1
vote
0
answers
1k
views
After Updating Intel Rapid Storage Technology Software, Windows 10 won't boot
After updating my Intel Rapid Storage Technology (IRST) software, My windows 10 desktop computer won't boot.
I'm using IRST to manage my RAID 1.
I can't access Safe Mode to undo the IRST software ...
1
vote
1
answer
3k
views
Can't boot to Windows 10 from RAID 0
I got myself a Silicon Image 3114 SATA Controller which is capable of RAIDing two discs. I have two SSD sporting approx. 230 GB each. I wanted to enable RAID 0 (striping) to have one "virtual" drive ...
1
vote
0
answers
380
views
NVDIMM DAX boot
I'm trying to find more definitive information, but are there documented examples of an OS booting from real NVDIMM (single or multiple), possibly with a DAX filesystem?
I understand that NVDIMM's ...
0
votes
1
answer
410
views
Issues booting physical raid disks in vmware 14
I'm trying to set a physical raid6 partition on a physical slackware install in VMWare. mdadm set up goes flawlessly when I boot the machine normally. But when I boot it in VMWare I get the ...
0
votes
1
answer
416
views
Dell PE2950 Will not boot
I have a fresh install of CentOS 7.2 on a Dell PE2950 that will not reboot properly.
Every time that I try to reboot, BIOS changes, RAID changes, after booting into the OS on HDDs or USB. No matter ...
0
votes
2
answers
3k
views
How to assess a RAID0 error?
I read the following post and I am having an issue with my laptop (Acer Aspire S7-392). The drive set up was RAID0. I have little experience in RAID setup, but here is the screen I encounter once ...
0
votes
1
answer
133
views
RAID 5 Data Recovery Unusual Behaviour
I am attempting to recover a HW RAID 5 setup from what appears to be a failing motherboard chipset.
The BIOS can detect the 3 individual drives, and the RAID ROM detects all 3 drives as member drives....
0
votes
2
answers
2k
views
Boot Linux from degraded RAID1 with /boot installed on md0
First of all I'd like to say that I'm very new to managing RAID arrays in Linux so my questions are probably very basic, but I can't seem to find my exact scenario on the internet.
I have a RAID1 ...
0
votes
1
answer
930
views
Boot from btrfs RAID5/6?
I'm trying to build an Arch Linux system with a btrfs RAID5/6 root. When I install GRUB on one of the volume's disks, it prints a message like this on startup:
error: no such device: [my btrfs volume ...
1
vote
0
answers
1k
views
Boot from old hard drive
The motherboard of my old computer died suddenly and so I bought a new computer. It has two 1TB HDDs on RAID 0 and comes preinstalled with Windows 10 Home. I wanted my computer to boot from my old ...
0
votes
0
answers
2k
views
Unable to UEFI boot once RAID is enabled
I have the current drive setup. 1 SSD that holds windows, 2 smaller SSD's that are RAID0'd and 1 platter drive.
When I installed windows 10, all was good and things were booting fine. After a BIOS ...
1
vote
0
answers
239
views
AMD RAID 5 not booting after Windows Server 2012 updates
I've recently been working to reconfigure my home server. I decided to setup a RAID 5 for my operating system and virtual machines using my Asus M5A97 R2.0 built in AMD RAID. I was able to setup the ...
1
vote
1
answer
2k
views
Acer Aspire S7-391: No bootable device
After fixing the motherboard of my Acer Aspire S7-391 i tried to boot it from the stock SSD. However, i get a screen which lists the details of RAID Volume and Physical Devices. The last line says "...
1
vote
0
answers
978
views
Dual-booting OS with a shared RAID array
Hardware:
ASRock H97M-ITX/ac motherboard
Two 4TB hard drives
One 120GB SSD
So here's what I'm trying to do. I want to run my two hard drives in RAID 1 through the motherboard's hardware RAID, purely ...
1
vote
1
answer
825
views
Failure of 1 SSD in Raid-0 that was bootdrive stopping computer from booting
I've spent 4+ hours searching this site and Google for someone to have/address my issue, and have had no luck so far, so I was wondering if someone could help me. Thank you!
My computer has 2 32 GB ...
1
vote
0
answers
487
views
"Disk read error occurred" booting from hard drive or USB on Windows Server 2008
Here's the setup: an Athlon X2, 4 GB of RAM, and a 2x2 RAID 10 array of 4 500GB drives, which also houses the OS.
After a usual reboot the machine didn't respond to ping. I connected it to a display ...
1
vote
0
answers
98
views
Boot up from RAID with new motherboard
our computer was about to die (it beeped 5 times and then rebooted, AMI beep codes say that is a failing motherboard/cpu) so we decided to get a new motherboard and CPU, a Gigabyte F2A88XM-DS2 with ...
1
vote
1
answer
74
views
Migrating to a bigger hard drive
My PC is a Dell Inspiron T3500, running a Xeon 3530, and 12GB DDR3 RAM.
I am currently running two WD Velociraptor drives, 300GB each, in RAID format, so it appears as one ~600GB hard drive on my PC. ...
0
votes
1
answer
538
views
Boot issue after restore to RAID and adding external HDD. Windows 7 Pro
Background info: I ran into an issue Ghosting a PC. The PC I am on is an HPZ440 Workstation, the PC has 3 hard drives. One SSD connected via PCIe and two SSDs connected via SATA and configured as a ...
0
votes
1
answer
390
views
No RAID boot menu on system start up
I have an HP Pavilion Elite HPE. I used to have an onboard RAID boot up screen but now I do not. Could this have vanished based on a glitch with using a different graphics card or the slow that it is ...
0
votes
2
answers
1k
views
RAID 1 accidentially booted in AHCI mode
I have two Samsung 840 EVO SSD's in RAID 1 (Asus P87-Pro and Intel Controller) with Windows 8.1 Pro on it. After a BIOS update, apparently all BIOS settings was reset, which apparently changed the ...
-1
votes
1
answer
207
views
Problems creating a bootable RAID volume when imaging from HDD to SSD
I have an old Dell XPS420 with an Intel RAID controller on the MB. For years I’ve had RAID 1 enabled on a 2x1TB array set up as two volumes: A 300GB volume which has Windows 7 installed on it and the ...
0
votes
1
answer
51
views
Bootable RAID1 instead of extra SATA drive
Here's the deal as a web developer I am total rookie in the hardware stuff, but since we make more money now and tried to experiment some stuff.
I got this Raid1 (4 SAS Drives) and extra 3TB Sata ...