2

Specs:

  • Motherboard: MSI 760GM-P23 FX
  • Integrated graphics (on MoBo)
  • CPU: AMD Athlon II x4 640
  • RAM: GeIL Pristine 4GB DDR3
  • Case/PSU: TOPOWER TP-4107BB-400

Is not POSTing, no video output, no beeps. When RAM is removed, 3 beeps. I have tried removing and replacing the CPU and all the power cables with no change. Resetting the BIOS (by removing and replacing the battery) did nothing as well.

Is there something I'm forgetting (1st time building from components), or could one of the components be bad?

New development: with CPU and RAM installed correctly, it will turn on lights and fans (still no POST) and after running for a minute or so it will turn off and the PSU will make a buzzing noise that ceases only when unplugged.

9
  • 1
    Sounds like a dumb question, but did you forget the 4-Pin motherboard power? its separate from the ATX 24-pin one. Whenever this happens to me, it always seems to be i forgot to hook that one up. Commented Nov 30, 2012 at 2:37
  • @JaredTritsch yes, the 4-pin power connector is attached correctly Commented Nov 30, 2012 at 2:44
  • Ah okay, nevermind about that then... Commented Nov 30, 2012 at 3:03
  • do the fans or any LEDs come up when you power it? if not triple check your power wiring. if still no fans, sounds like an RMA to me. Commented Nov 30, 2012 at 4:10
  • @FrankThomas All LEDs and fans come on as normal Commented Nov 30, 2012 at 4:18

1 Answer 1

2

It turns out it was a RAM issue. It boots just fine with the new stick of RAM I bought. I guess I need to stop going for the cheapest parts all the time. ☺

1
  • 1
    Glad you figured it out. That is what I was suspecting also, but without the ability to test other sticks and such makes it difficult.
    – Phillip R.
    Commented Dec 9, 2012 at 3:03

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .