Skip to main content
Super User

Return to Question

added 145 characters in body; edited tags
Source Link
Hennes
Hennes
  • 65.3k
  • 7
  • 113
  • 168

Hardware:

  • 1x Shuttle SZ87R6 with 500W power supply
  • 1x Intel i7-4790
  • 4x G.Skill 8GB, DDR3-1600, CL10-10-10-30 (F3-12800CL10S-8GBXL)
  • 1x Samsung SSD 850 Evo 250 GB (With linux openSuSE 13.2)
  • 3x Seagate ST2000DX001 2TB SSHD 3,5" 7.200 rpm hard drives Used as Linux software raid 5 Seagate spec: 2 A per drive for startup.

BiosUEFI firmware version SZ87R000 2.03 (latest) in Legacy mode Set as boot device only the Samsung SSD 850 Evo 250 GB

Build up system without 3x 2TB hard drives. First time system bootetbooted with 3x SSHD hard drives. After creating software raidRAUD 5 boot process stops after the sentence "Press or to enter setup"Press <DEL> or <ESC> to enter setup.

When from 2 drives the sataSATA data cable is removed (power cable remains) system boots properly.

Have set sata to hot swap, can attach stataSATA cables whenafter linux has bootetbooted. All drives work fine then.

Connected, with adapter cable, sataSATA drives to another cable, problem still exists.

Is this a power startup problem? Haven't

Haven't found any delayed startup setting in BIOS as well as in the S.M.A.R.T. spec.

Thanks in advance,

Herman

 

Hardware:

  • 1x Shuttle SZ87R6 with 500W power supply
  • 1x Intel i7-4790
  • 4x G.Skill 8GB, DDR3-1600, CL10-10-10-30 (F3-12800CL10S-8GBXL)
  • 1x Samsung SSD 850 Evo 250 GB (With linux openSuSE 13.2)
  • 3x Seagate ST2000DX001 2TB SSHD 3,5" 7.200 rpm hard drives Used as Linux software raid 5 Seagate spec: 2 A per drive for startup.

Bios version SZ87R000 2.03 (latest) in Legacy mode Set as boot device only the Samsung SSD 850 Evo 250 GB

Build up system without 3x 2TB hard drives. First time system bootet with 3x SSHD hard drives. After creating software raid 5 boot process stops after the sentence "Press or to enter setup".

When from 2 drives the sata cable is removed (power cable remains) system boots properly.

Have set sata to hot swap, can attach stata cables when linux has bootet. All drives work fine then.

Connected, with adapter cable, sata drives to another cable, problem still exists.

Is this a power startup problem? Haven't found any delayed startup setting in BIOS as well as in the S.M.A.R.T. spec.

Thanks in advance,

Herman

Hardware:

  • 1x Shuttle SZ87R6 with 500W power supply
  • 1x Intel i7-4790
  • 4x G.Skill 8GB, DDR3-1600, CL10-10-10-30 (F3-12800CL10S-8GBXL)
  • 1x Samsung SSD 850 Evo 250 GB (With linux openSuSE 13.2)
  • 3x Seagate ST2000DX001 2TB SSHD 3,5" 7.200 rpm hard drives Used as Linux software raid 5 Seagate spec: 2 A per drive for startup.

UEFI firmware version SZ87R000 2.03 (latest) in Legacy mode Set as boot device only the Samsung SSD 850 Evo 250 GB

Build up system without 3x 2TB hard drives. First time system booted with 3x SSHD hard drives. After creating software RAUD 5 boot process stops after the sentence Press <DEL> or <ESC> to enter setup.

When from 2 drives the SATA data cable is removed (power cable remains) system boots properly.

Have set sata to hot swap, can attach SATA cables after linux has booted. All drives work fine then.

Connected, with adapter cable, SATA drives to another cable, problem still exists.

Is this a power startup problem?

Haven't found any delayed startup setting in BIOS as well as in the S.M.A.R.T. spec.

 
Source Link
Herman Lankreijer
Herman Lankreijer
  • 1

Shuttle SZ87R6 with 3x SSHD 2TB hard drives doesn't boot

Hardware:

  • 1x Shuttle SZ87R6 with 500W power supply
  • 1x Intel i7-4790
  • 4x G.Skill 8GB, DDR3-1600, CL10-10-10-30 (F3-12800CL10S-8GBXL)
  • 1x Samsung SSD 850 Evo 250 GB (With linux openSuSE 13.2)
  • 3x Seagate ST2000DX001 2TB SSHD 3,5" 7.200 rpm hard drives Used as Linux software raid 5 Seagate spec: 2 A per drive for startup.

Bios version SZ87R000 2.03 (latest) in Legacy mode Set as boot device only the Samsung SSD 850 Evo 250 GB

Build up system without 3x 2TB hard drives. First time system bootet with 3x SSHD hard drives. After creating software raid 5 boot process stops after the sentence "Press or to enter setup".

When from 2 drives the sata cable is removed (power cable remains) system boots properly.

Have set sata to hot swap, can attach stata cables when linux has bootet. All drives work fine then.

Connected, with adapter cable, sata drives to another cable, problem still exists.

Is this a power startup problem? Haven't found any delayed startup setting in BIOS as well as in the S.M.A.R.T. spec.

Thanks in advance,

Herman