I am a newbie in sysadmin.

Am having a problem with my comp PC. The new DEL XPS 8700 with windows, has been replaced with CentOS 5.10 (OS used currently by my comp).

After uninstalled the windows, the network of the PC cant be accessed at all. LAN specifically.

Below are the details:

ifconfig -a

eth0 Link encap:Ethernet HWaddr F8:B1:56:B3:65:**
BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:58 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.* Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1223 errors:0 dropped:0 overruns:0 frame:0 TX packets:1223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2318264 (2.2 MiB) TX bytes:2318264 (2.2 MiB)

sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

netstat -rn

Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface

service network restart

Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth1: r8169 device eth1 does not seem to be present, delaying initialization. [FAILED]

lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) 00:1c.7 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 [8086:8c1e] (rev d5) 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208 [GeForce GT 635] [10de:1280] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0e0f] (rev a1) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c) 04:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)

dhclient

Internet Systems Consortium DHCP Client V3.0.5-RedHat Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/

/sbin/dhclient-script: configuration for eth0 not found. Continuing with defaults. /etc/sysconfig/network-scripts/network-functions: line 78: eth0: No such file or directory Listening on LPF/eth0/f8:b1:56:b3:65:** Sending on LPF/eth0/f8:b1:56:b3:65:** Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 (xid=0x66a28d5b) DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 (xid=0x66a28d5b) DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 (xid=0x66a28d5b) DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 (xid=0x66a28d5b) DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 (xid=0x66a28d5b) DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 (xid=0x66a28d5b) No DHCPOFFERS received. No working leases in persistent database - sleeping. /sbin/dhclient-script: configuration for eth0 not found. Continuing with defaults. /etc/sysconfig/network-scripts/network-functions: line 78: eth0: No such file or directory

[root@localhost network-scripts]# ls

ifcfg-eth0~ ifdown-ipsec ifup ifup-plip init.ipv6-global ifcfg-eth1 ifdown-ipv6 ifup-aliases ifup-plusb net.hotplug ifcfg-eth1~ ifdown-isdn ifup-bnep ifup-post network-functions ifcfg-lo ifdown-post ifup-eth ifup-ppp network-functions-ipv6 ifcfg-lo~ ifdown-ppp ifup-ippp ifup-routes route-eth1 ifdown ifdown-routes ifup-ipsec ifup-sit ifdown-bnep ifdown-sit ifup-ipv6 ifup-sl ifdown-eth ifdown-sl ifup-ipx ifup-tunnel ifdown-ippp ifdown-tunnel ifup-isdn ifup-wireless

ping localhost

PING localhost.localdomain (127.0.0.) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.): icmp_seq=1 ttl=64 time=0.067 ms 64 bytes from localhost.localdomain (127.0.0.): icmp_seq=2 ttl=64 time=0.035 ms 64 bytes from localhost.localdomain (127.0.0.): icmp_seq=3 ttl=64 time=0.032 ms 64 bytes from localhost.localdomain (127.0.0.): icmp_seq=4 ttl=64 time=0.032 ms 64 bytes from localhost.localdomain (127.0.0.): icmp_seq=5 ttl=64 time=0.030 ms 64 bytes from localhost.localdomain (127.0.0.): icmp_seq=6 ttl=64 time=0.031 ms 64 bytes from localhost.localdomain (127.0.0.): icmp_seq=7 ttl=64 time=0.030 ms

[1]+ Stopped ping localhost

ping 192.168.1.*

connect: Network is unreachable

I have no idea on what else to do.

I have done:

-#HWADDR

-add the eth0 device (default setting are device of eth1 : because some artcle mentioned on error of geting eth1 on initial start)

Can anyone help me please?

Thank you.