3 months ago, I accidentally bent my CPU socket pins as I was foolishly cleaning the mobo (socket 1155 Motherboard). Then after researching, I tried to correct the pins but no luck. I put all the components and the PC didn't boot at all. I tried, for like, 30-40 times but PC didn't boot with the bent pins. (Note that 1-2 pins also broke) So I gave up for some months when I came to know that I will have to replace my Motherboard.

Now some weeks ago I bought a new Motherboard (Lapcare H61 socket 1155) and assembled the PC. The PC booted up normally and I installed the mobo drivers successfully. Everything was going fine but the PC suddenly turned off (after 30 mins) and never booted again. I tried literally a 100 times in a week but PC didn't boot. What used to happen: After pressing the Power button, the CPU fan would try to spin but fail and PSU fan also stops spinning (all this used to happen in 1 second) Monitor used to show Cable not connected.

Now I thought that during all this, my processor might have been damaged, so I bought a Core i3-3240. I assembled the PC again today and it again booted up pretty fine. I was happy. The PC detected the new CPU and everything was just fine. I even restarted the PC and that was successful. But again it turned off on its own after like 25-30 mins. When I'm trying to turn it on, the CPU fan tries to spin but nothing happens (the same thing I explained above).

I have checked my RAM, HDD and they are fine (according to elimination method) PC won't boot even after removing RAM and HDD and Optical Drive. I have also checked the PSU using the Green-Black wire shorting technique and the PSU works fine (the fan spins just fine) Please tell me what could be the issue, I'm depressed since months as I'm not financially strong. It's been hell for me all this time :(

Motherboard: Lapcare H61 Lga 1155 CPU: earlier Pentium G2020 and now Core i3-3240 3.40 GHz RAM: 2 GB + 8 GB DDR3 HyperX And yes, there's no thermal paste between my cpu and heatsink (intel stock) but this was the case since 1 year and PC used to work fine)

Thank you everyone in advance.

3 months ago, I accidentally bent my CPU socket pins as I was foolishly cleaning the mobo (socket 1155 Motherboard). Then after researching, I tried to correct the pins but no luck. I put all the components and the PC didn't boot at all. I tried, for like, 30-40 times but PC didn't boot with the bent pins. (Note that 1-2 pins also broke) So I gave up for some months when I came to know that I will have to replace my Motherboard.

Now some weeks ago I bought a new Motherboard (Lapcare H61 socket 1155) and assembled the PC. The PC booted up normally and I installed the mobo drivers successfully. Everything was going fine but the PC suddenly turned off (after 30 mins) and never booted again. I tried literally a 100 times in a week but PC didn't boot. What used to happen: After pressing the Power button, the CPU fan would try to spin but fail and PSU fan also stops spinning (all this used to happen in 1 second) Monitor used to show Cable not connected.

Now I thought that during all this, my processor might have been damaged, so I bought a Core i3-3240. I assembled the PC again today and it again booted up pretty fine. I was happy. The PC detected the new CPU and everything was just fine. I even restarted the PC and that was successful. But again it turned off on its own after like 25-30 mins. When I'm trying to turn it on, the CPU fan tries to spin but nothing happens (the same thing I explained above).

I have checked my RAM, HDD and they are fine (according to elimination method) PC won't boot even after removing RAM and HDD and Optical Drive. I have also checked the PSU using the Green-Black wire shorting technique and the PSU works fine (the fan spins just fine) Please tell me what could be the issue, I'm depressed since months as I'm not financially strong. It's been hell for me all this time :(

Motherboard: Lapcare H61 Lga 1155 CPU: earlier Pentium G2020 and now Core i3-3240 3.40 GHz RAM: 2 GB + 8 GB DDR3 HyperX And yes, there's no thermal paste between my cpu and heatsink (intel stock) but this was the case since 1 year and PC used to work fine) Edit: i have tried resetting CMOS but no luck Thank you everyone in advance.